Clang buildfixes

[fw/openocd] / src / flash / nor / str9x.c

diff --git a/src/flash/nor/str9x.c b/src/flash/nor/str9x.c
index 95da3e242f3392877b34f413bad1bdd98f2f00c3..d0c1278f572f9f35d4d9742ac267e75b8c19bed0 100644 (file)
--- a/src/flash/nor/str9x.c
+++ b/src/flash/nor/str9x.c
@@ -230,17 +230,9 @@ static int str9x_erase(struct flash_bank *bank, int first, int last)
                return ERROR_TARGET_NOT_HALTED;
        }
 
-       /* Check if we erase whole bank */
-       if ((first == 0) && (last == (bank->num_sectors - 1)))
-       {
-               /* Optimize to run erase bank command instead of sector */
-               erase_cmd = 0x80;
-       }
-       else
-       {
-               /* Erase sector command */
-               erase_cmd = 0x20;
-       }
+       /*A slower but stable way of erasing*/
+       /* Erase sector command */
+       erase_cmd = 0x20;
 
        for (i = first; i <= last; i++)
        {
@@ -296,10 +288,6 @@ static int str9x_erase(struct flash_bank *bank, int first, int last)
                        LOG_ERROR("error erasing flash bank, status: 0x%x", status);
                        return ERROR_FLASH_OPERATION_FAILED;
                }
-
-               /* If we ran erase bank command, we are finished */
-               if (erase_cmd == 0x80)
-                       break;
        }
 
        for (i = first; i <= last; i++)
@@ -356,7 +344,7 @@ static int str9x_write_block(struct flash_bank *bank,
        struct working_area *source;
        uint32_t address = bank->base + offset;
        struct reg_param reg_params[4];
-       struct armv4_5_algorithm armv4_5_info;
+       struct arm_algorithm armv4_5_info;
        int retval = ERROR_OK;
 
        uint32_t str9x_flash_write_code[] = {
@@ -679,11 +667,12 @@ COMMAND_HANDLER(str9x_handle_flash_config_command)
 
 static const struct command_registration str9x_config_command_handlers[] = {
        {
-               .name = "disable_jtag",
+               .name = "flash_config",
                .handler = &str9x_handle_flash_config_command,
                .mode = COMMAND_EXEC,
-               .help = "configure str9x flash controller",
-               .usage = "<bank_id> <BBSR> <NBBSR> <BBADR> <NBBADR>",
+               .help = "Configure str9x flash controller, prior to "
+                       "programming the flash.",
+               .usage = "bank_id BBSR NBBSR BBADR NBBADR",
        },
        COMMAND_REGISTRATION_DONE
 };