cfi: calculate correct timeouts
[fw/openocd] / src / flash / nor / str7x.c
index 069e90c2e4ca3bec91c8a40e51a8f0bbc324b32f..6136f310d38572b3181247980715f0b9bf70a4a0 100644 (file)
 #endif
 
 #include "imp.h"
-#include "str7x.h"
 #include <target/arm.h>
 #include <helper/binarybuffer.h>
 #include <target/algorithm.h>
 
 
+/*  Flash registers */
+
+#define FLASH_CR0              0x00000000
+#define FLASH_CR1              0x00000004
+#define FLASH_DR0              0x00000008
+#define FLASH_DR1              0x0000000C
+#define FLASH_AR               0x00000010
+#define FLASH_ER               0x00000014
+#define FLASH_NVWPAR   0x0000DFB0
+#define FLASH_NVAPR0   0x0000DFB8
+#define FLASH_NVAPR1   0x0000DFBC
+
+/* FLASH_CR0 register bits */
+
+#define FLASH_WMS              0x80000000
+#define FLASH_SUSP             0x40000000
+#define FLASH_WPG              0x20000000
+#define FLASH_DWPG             0x10000000
+#define FLASH_SER              0x08000000
+#define FLASH_SPR              0x01000000
+#define FLASH_BER              0x04000000
+#define FLASH_MER              0x02000000
+#define FLASH_LOCK             0x00000010
+#define FLASH_BSYA1            0x00000004
+#define FLASH_BSYA0            0x00000002
+
+/* FLASH_CR1 register bits */
+
+#define FLASH_B1S              0x02000000
+#define FLASH_B0S              0x01000000
+#define FLASH_B1F1             0x00020000
+#define FLASH_B1F0             0x00010000
+#define FLASH_B0F7             0x00000080
+#define FLASH_B0F6             0x00000040
+#define FLASH_B0F5             0x00000020
+#define FLASH_B0F4             0x00000010
+#define FLASH_B0F3             0x00000008
+#define FLASH_B0F2             0x00000004
+#define FLASH_B0F1             0x00000002
+#define FLASH_B0F0             0x00000001
+
+/* FLASH_ER register bits */
+
+#define FLASH_WPF              0x00000100
+#define FLASH_RESER            0x00000080
+#define FLASH_SEQER            0x00000040
+#define FLASH_10ER             0x00000008
+#define FLASH_PGER             0x00000004
+#define FLASH_ERER             0x00000002
+#define FLASH_ERR              0x00000001
+
+
+struct str7x_flash_bank
+{
+       uint32_t *sector_bits;
+       uint32_t disable_bit;
+       uint32_t busy_bits;
+       uint32_t register_base;
+       struct working_area *write_algorithm;
+};
+
+struct str7x_mem_layout {
+       uint32_t sector_start;
+       uint32_t sector_size;
+       uint32_t sector_bit;
+};
+
+enum str7x_status_codes
+{
+       STR7X_CMD_SUCCESS = 0,
+       STR7X_INVALID_COMMAND = 1,
+       STR7X_SRC_ADDR_ERROR = 2,
+       STR7X_DST_ADDR_ERROR = 3,
+       STR7X_SRC_ADDR_NOT_MAPPED = 4,
+       STR7X_DST_ADDR_NOT_MAPPED = 5,
+       STR7X_COUNT_ERROR = 6,
+       STR7X_INVALID_SECTOR = 7,
+       STR7X_SECTOR_NOT_BLANK = 8,
+       STR7X_SECTOR_NOT_PREPARED = 9,
+       STR7X_COMPARE_ERROR = 10,
+       STR7X_BUSY = 11
+};
+
 static struct str7x_mem_layout mem_layout_str7bank0[] = {
        {0x00000000, 0x02000, 0x01},
        {0x00002000, 0x02000, 0x02},
@@ -406,6 +488,8 @@ static int str7x_write_block(struct flash_bank *bank, uint8_t *buffer,
        struct arm_algorithm armv4_5_info;
        int retval = ERROR_OK;
 
+       /* see contib/loaders/flash/str7x.s for src */
+
        static const uint32_t str7x_flash_write_code[] = {
                                        /* write:                               */
                0xe3a04201, /*  mov r4, #0x10000000     */