* GNU General Public License for more details. *
* *
* You should have received a copy of the GNU General Public License *
- * along with this program; if not, write to the *
- * Free Software Foundation, Inc. *
+ * along with this program. If not, see <http://www.gnu.org/licenses/>. *
***************************************************************************/
#ifdef HAVE_CONFIG_H
/* STM32L4xxx series for reference.
*
- * RM0351
- * http://www.st.com/st-web-ui/static/active/en/resource/technical/document/reference_manual/DM00083560.pdf
+ * RM0351 (STM32L4x5/STM32L4x6)
+ * http://www.st.com/resource/en/reference_manual/dm00083560.pdf
*
- * STM32L476RG Datasheet (for erase timing)
- * http://www.st.com/st-web-ui/static/active/en/resource/technical/document/datasheet/DM00108832.pdf
+ * RM0394 (STM32L43x/44x/45x/46x)
+ * http://www.st.com/resource/en/reference_manual/dm00151940.pdf
*
+ * STM32L476RG Datasheet (for erase timing)
+ * http://www.st.com/resource/en/datasheet/stm32l476rg.pdf
*
- * The device has normally two banks, but on 512 and 256 kiB devices an
- * option byte is available to map all sectors to the first bank.
+ * The RM0351 devices have normally two banks, but on 512 and 256 kiB devices
+ * an option byte is available to map all sectors to the first bank.
* Both STM32 banks are treated as one OpenOCD bank, as other STM32 devices
* handlers do!
*
+ * RM0394 devices have a single bank only.
+ *
*/
/* Erase time can be as high as 25ms, 10x this and assume it's toast... */
/* Clear but report errors */
if (status & FLASH_ERROR) {
+ if (retval == ERROR_OK)
+ retval = ERROR_FAIL;
/* If this operation fails, we ignore it and report the original
* retval
*/
struct armv7m_algorithm armv7m_info;
int retval = ERROR_OK;
- /* See contrib/loaders/flash/stm32l4x.S for source and
- * hints how to generate the data!
- */
-
static const uint8_t stm32l4_flash_write_code[] = {
- 0xd0, 0xf8, 0x00, 0x80, 0xb8, 0xf1, 0x00, 0x0f, 0x22, 0xd0, 0x47, 0x68,
- 0xb8, 0xeb, 0x07, 0x06, 0x07, 0x2e, 0xf5, 0xd3, 0xdf, 0xf8, 0x3c, 0x60,
- 0x66, 0x61, 0x57, 0xf8, 0x04, 0x6b, 0x42, 0xf8, 0x04, 0x6b, 0x57, 0xf8,
- 0x04, 0x6b, 0x42, 0xf8, 0x04, 0x6b, 0xbf, 0xf3, 0x4f, 0x8f, 0x26, 0x69,
- 0x16, 0xf4, 0x80, 0x3f, 0xfb, 0xd1, 0x16, 0xf0, 0xfa, 0x0f, 0x07, 0xd1,
- 0x8f, 0x42, 0x28, 0xbf, 0x00, 0xf1, 0x08, 0x07, 0x47, 0x60, 0x01, 0x3b,
- 0x13, 0xb1, 0xd9, 0xe7, 0x00, 0x21, 0x41, 0x60, 0x30, 0x46, 0x00, 0xbe,
- 0x01, 0x00, 0x00, 0x00
+#include "../../../contrib/loaders/flash/stm32/stm32l4x.inc"
};
if (target_alloc_working_area(target, sizeof(stm32l4_flash_write_code),
&write_algorithm) != ERROR_OK) {
LOG_WARNING("no working area available, can't do block memory writes");
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
- };
+ }
retval = target_write_buffer(target, write_algorithm->address,
sizeof(stm32l4_flash_write_code),
stm32l4_flash_write_code);
- if (retval != ERROR_OK)
+ if (retval != ERROR_OK) {
+ target_free_working_area(target, write_algorithm);
return retval;
+ }
/* memory buffer */
while (target_alloc_working_area_try(target, buffer_size, &source) !=
LOG_WARNING("no large enough working area available, can't do block memory writes");
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
}
- };
+ }
armv7m_info.common_magic = ARMV7M_COMMON_MAGIC;
armv7m_info.core_mode = ARM_MODE_THREAD;
struct stm32l4_flash_bank *stm32l4_info = bank->driver_priv;
int i;
uint16_t flash_size_in_kb = 0xffff;
+ uint16_t max_flash_size_in_kb;
uint32_t device_id;
uint32_t options;
uint32_t base_address = 0x08000000;
/* set max flash size depending on family */
switch (device_id & 0xfff) {
+ case 0x461:
case 0x415:
+ max_flash_size_in_kb = 1024;
+ break;
+ case 0x462:
+ max_flash_size_in_kb = 512;
+ break;
+ case 0x435:
+ max_flash_size_in_kb = 256;
break;
default:
LOG_WARNING("Cannot identify target as a STM32L4 family.");
/* get flash size from target. */
retval = target_read_u16(target, FLASH_SIZE_REG, &flash_size_in_kb);
+ /* failed reading flash size or flash size invalid (early silicon),
+ * default to max target family */
+ if (retval != ERROR_OK || flash_size_in_kb == 0xffff || flash_size_in_kb == 0) {
+ LOG_WARNING("STM32 flash size failed, probe inaccurate - assuming %dk flash",
+ max_flash_size_in_kb);
+ flash_size_in_kb = max_flash_size_in_kb;
+ }
+
+ LOG_INFO("flash size = %dkbytes", flash_size_in_kb);
+
+ /* did we assign flash size? */
+ assert(flash_size_in_kb != 0xffff);
+
/* get options to for DUAL BANK. */
retval = target_read_u32(target, STM32_FLASH_OPTR, &options);
+ if (retval != ERROR_OK)
+ return retval;
+
/* only devices with < 1024 kiB may be set to single bank dual banks */
if ((flash_size_in_kb == 1024) || !(options & OPT_DUALBANK))
stm32l4_info->option_bytes.bank_b_start = 256;
else
stm32l4_info->option_bytes.bank_b_start = flash_size_in_kb << 9;
- LOG_INFO("flash size = %dkbytes", flash_size_in_kb);
-
/* did we assign flash size? */
assert((flash_size_in_kb != 0xffff) && flash_size_in_kb);
if (retval != ERROR_OK)
return retval;
- uint16_t device_id = dbgmcu_idcode & 0xffff;
+ uint16_t device_id = dbgmcu_idcode & 0xfff;
uint8_t rev_id = dbgmcu_idcode >> 28;
uint8_t rev_minor = 0;
int i;
const char *device_str;
switch (device_id) {
- case 0x6415:
- device_str = "STM32L4xx";
+ case 0x461:
+ device_str = "STM32L496/4A6";
+ break;
+
+ case 0x415:
+ device_str = "STM32L475/476/486";
+ break;
+
+ case 0x462:
+ device_str = "STM32L45x/46x";
+ break;
+
+ case 0x435:
+ device_str = "STM32L43x/44x";
break;
default:
.erase_check = default_flash_blank_check,
.protect_check = stm32l4_protect_check,
.info = get_stm32l4_info,
+ .free_driver_priv = default_flash_free_driver_priv,
};
projects / fw / openocd / blobdiff