/***************************************************************************
* Copyright (C) 2015 by Uwe Bonnes *
* bon@elektron.ikp.physik.tu-darmstadt.de *
- *
+ * *
+ * Copyright (C) 2019 by Tarek Bochkati for STMicroelectronics *
+ * tarek.bouchkati@gmail.com *
+ * *
* This program is free software; you can redistribute it and/or modify *
* it under the terms of the GNU General Public License as published by *
* the Free Software Foundation; either version 2 of the License, or *
#include <helper/binarybuffer.h>
#include <target/algorithm.h>
#include <target/armv7m.h>
+#include "bits.h"
+#include "stm32l4x.h"
/* STM32L4xxx series for reference.
*
* RM0394 (STM32L43x/44x/45x/46x)
* http://www.st.com/resource/en/reference_manual/dm00151940.pdf
*
+ * RM0432 (STM32L4R/4Sxx)
+ * http://www.st.com/resource/en/reference_manual/dm00310109.pdf
+ *
* STM32L476RG Datasheet (for erase timing)
* http://www.st.com/resource/en/datasheet/stm32l476rg.pdf
*
*
* RM0394 devices have a single bank only.
*
+ * RM0432 devices have single and dual bank operating modes.
+ * - for STM32L4R/Sxx the FLASH size is 2Mbyte or 1Mbyte.
+ * - for STM32L4P/Q5x the FLASH size is 1Mbyte or 512Kbyte.
+ * Bank page (sector) size is 4Kbyte (dual mode) or 8Kbyte (single mode).
+ *
+ * Bank mode is controlled by two different bits in option bytes register.
+ * - for STM32L4R/Sxx
+ * In 2M FLASH devices bit 22 (DBANK) controls Dual Bank mode.
+ * In 1M FLASH devices bit 21 (DB1M) controls Dual Bank mode.
+ * - for STM32L4P5/Q5x
+ * In 1M FLASH devices bit 22 (DBANK) controls Dual Bank mode.
+ * In 512K FLASH devices bit 21 (DB512K) controls Dual Bank mode.
+ *
+ */
+
+/* STM32WBxxx series for reference.
+ *
+ * RM0434 (STM32WB55)
+ * http://www.st.com/resource/en/reference_manual/dm00318631.pdf
+ *
+ * RM0471 (STM32WB50)
+ * http://www.st.com/resource/en/reference_manual/dm00622834.pdf
+ */
+
+/* STM32WLxxx series for reference.
+ *
+ * RM0461 (STM32WLEx)
+ * http://www.st.com/resource/en/reference_manual/dm00530369.pdf
+ */
+
+/*
+ * STM32G0xxx series for reference.
+ *
+ * RM0444 (STM32G0x1)
+ * http://www.st.com/resource/en/reference_manual/dm00371828.pdf
+ *
+ * RM0454 (STM32G0x0)
+ * http://www.st.com/resource/en/reference_manual/dm00463896.pdf
+ */
+
+/*
+ * STM32G4xxx series for reference.
+ *
+ * RM0440 (STM32G43x/44x/47x/48x)
+ * http://www.st.com/resource/en/reference_manual/dm00355726.pdf
+ *
+ * Cat. 2 devices have single bank only, page size is 2kByte.
+ *
+ * Cat. 3 devices have single and dual bank operating modes,
+ * Page size is 2kByte (dual mode) or 4kByte (single mode).
+ *
+ * Bank mode is controlled by bit 22 (DBANK) in option bytes register.
+ * Both banks are treated as a single OpenOCD bank.
*/
/* Erase time can be as high as 25ms, 10x this and assume it's toast... */
#define FLASH_ERASE_TIMEOUT 250
-#define STM32_FLASH_BASE 0x40022000
-#define STM32_FLASH_ACR 0x40022000
-#define STM32_FLASH_KEYR 0x40022008
-#define STM32_FLASH_OPTKEYR 0x4002200c
-#define STM32_FLASH_SR 0x40022010
-#define STM32_FLASH_CR 0x40022014
-#define STM32_FLASH_OPTR 0x40022020
-#define STM32_FLASH_WRP1AR 0x4002202c
-#define STM32_FLASH_WRP1BR 0x40022030
-#define STM32_FLASH_WRP2AR 0x4002204c
-#define STM32_FLASH_WRP2BR 0x40022050
-
-/* FLASH_CR register bits */
-
-#define FLASH_PG (1 << 0)
-#define FLASH_PER (1 << 1)
-#define FLASH_MER1 (1 << 2)
-#define FLASH_PAGE_SHIFT 3
-#define FLASH_CR_BKER (1 << 11)
-#define FLASH_MER2 (1 << 15)
-#define FLASH_STRT (1 << 16)
-#define FLASH_OPTSTRT (1 << 17)
-#define FLASH_EOPIE (1 << 24)
-#define FLASH_ERRIE (1 << 25)
-#define FLASH_OBLLAUNCH (1 << 27)
-#define FLASH_OPTLOCK (1 << 30)
-#define FLASH_LOCK (1 << 31)
-
-/* FLASH_SR register bits */
-
-#define FLASH_BSY (1 << 16)
-/* Fast programming not used => related errors not used*/
-#define FLASH_PGSERR (1 << 7) /* Programming sequence error */
-#define FLASH_SIZERR (1 << 6) /* Size error */
-#define FLASH_PGAERR (1 << 5) /* Programming alignment error */
-#define FLASH_WRPERR (1 << 4) /* Write protection error */
-#define FLASH_PROGERR (1 << 3) /* Programming error */
-#define FLASH_OPERR (1 << 1) /* Operation error */
-#define FLASH_EOP (1 << 0) /* End of operation */
-
-#define FLASH_ERROR (FLASH_PGSERR | FLASH_PGSERR | FLASH_PGAERR | FLASH_WRPERR | FLASH_OPERR)
-
-/* STM32_FLASH_OBR bit definitions (reading) */
-
-#define OPT_DUALBANK (1 << 21) /* dual flash bank only */
-
-/* register unlock keys */
-
-#define KEY1 0x45670123
-#define KEY2 0xCDEF89AB
-
-/* option register unlock key */
-#define OPTKEY1 0x08192A3B
-#define OPTKEY2 0x4C5D6E7F
-
-#define RDP_LEVEL_0 0xAA
-#define RDP_LEVEL_1 0xBB
-#define RDP_LEVEL_2 0xCC
-
-
-/* other registers */
-#define DBGMCU_IDCODE 0xE0042000
-#define FLASH_SIZE_REG 0x1FFF75E0
+struct stm32l4_rev {
+ const uint16_t rev;
+ const char *str;
+};
+
+struct stm32l4_part_info {
+ uint16_t id;
+ const char *device_str;
+ const struct stm32l4_rev *revs;
+ const size_t num_revs;
+ const uint16_t max_flash_size_kb;
+ const bool has_dual_bank;
+ const uint32_t flash_regs_base;
+ const uint32_t fsize_addr;
+};
struct stm32l4_flash_bank {
- uint16_t bank2_start;
- int probed;
+ bool probed;
+ uint32_t idcode;
+ int bank1_sectors;
+ bool dual_bank_mode;
+ int hole_sectors;
+ uint32_t user_bank_size;
+ uint32_t wrpxxr_mask;
+ const struct stm32l4_part_info *part_info;
};
-/* flash bank stm32l4x <base> <size> 0 0 <target#>
- */
+/* human readable list of families this drivers supports */
+static const char *device_families = "STM32L4/L4+/WB/WL/G4/G0";
+
+static const struct stm32l4_rev stm32_415_revs[] = {
+ { 0x1000, "1" }, { 0x1001, "2" }, { 0x1003, "3" }, { 0x1007, "4" }
+};
+
+static const struct stm32l4_rev stm32_435_revs[] = {
+ { 0x1000, "A" }, { 0x1001, "Z" }, { 0x2001, "Y" },
+};
+
+static const struct stm32l4_rev stm32_460_revs[] = {
+ { 0x1000, "A/Z" } /* A and Z, no typo in RM! */, { 0x2000, "B" },
+};
+
+static const struct stm32l4_rev stm32_461_revs[] = {
+ { 0x1000, "A" }, { 0x2000, "B" },
+};
+
+static const struct stm32l4_rev stm32_462_revs[] = {
+ { 0x1000, "A" }, { 0x1001, "Z" }, { 0x2001, "Y" },
+};
+
+static const struct stm32l4_rev stm32_464_revs[] = {
+ { 0x1000, "A" }, { 0x1001, "Z" }, { 0x2001, "Y" },
+};
+
+static const struct stm32l4_rev stm32_466_revs[] = {
+ { 0x1000, "A" }, { 0x1001, "Z" }, { 0x2000, "B" },
+};
+
+static const struct stm32l4_rev stm32_468_revs[] = {
+ { 0x1000, "A" }, { 0x2000, "B" }, { 0x2001, "Z" },
+};
+
+static const struct stm32l4_rev stm32_469_revs[] = {
+ { 0x1000, "A" }, { 0x2000, "B" }, { 0x2001, "Z" },
+};
+
+static const struct stm32l4_rev stm32_470_revs[] = {
+ { 0x1000, "A" }, { 0x1001, "Z" }, { 0x1003, "Y" }, { 0x100F, "W" },
+};
+
+static const struct stm32l4_rev stm32_471_revs[] = {
+ { 0x1000, "1" },
+};
+
+static const struct stm32l4_rev stm32_495_revs[] = {
+ { 0x2001, "2.1" },
+};
+
+static const struct stm32l4_rev stm32_496_revs[] = {
+ { 0x1000, "A" },
+};
+
+static const struct stm32l4_rev stm32_497_revs[] = {
+ { 0x1000, "1.0" },
+};
+
+static const struct stm32l4_part_info stm32l4_parts[] = {
+ {
+ .id = 0x415,
+ .revs = stm32_415_revs,
+ .num_revs = ARRAY_SIZE(stm32_415_revs),
+ .device_str = "STM32L47/L48xx",
+ .max_flash_size_kb = 1024,
+ .has_dual_bank = true,
+ .flash_regs_base = 0x40022000,
+ .fsize_addr = 0x1FFF75E0,
+ },
+ {
+ .id = 0x435,
+ .revs = stm32_435_revs,
+ .num_revs = ARRAY_SIZE(stm32_435_revs),
+ .device_str = "STM32L43/L44xx",
+ .max_flash_size_kb = 256,
+ .has_dual_bank = false,
+ .flash_regs_base = 0x40022000,
+ .fsize_addr = 0x1FFF75E0,
+ },
+ {
+ .id = 0x460,
+ .revs = stm32_460_revs,
+ .num_revs = ARRAY_SIZE(stm32_460_revs),
+ .device_str = "STM32G07/G08xx",
+ .max_flash_size_kb = 128,
+ .has_dual_bank = false,
+ .flash_regs_base = 0x40022000,
+ .fsize_addr = 0x1FFF75E0,
+ },
+ {
+ .id = 0x461,
+ .revs = stm32_461_revs,
+ .num_revs = ARRAY_SIZE(stm32_461_revs),
+ .device_str = "STM32L49/L4Axx",
+ .max_flash_size_kb = 1024,
+ .has_dual_bank = true,
+ .flash_regs_base = 0x40022000,
+ .fsize_addr = 0x1FFF75E0,
+ },
+ {
+ .id = 0x462,
+ .revs = stm32_462_revs,
+ .num_revs = ARRAY_SIZE(stm32_462_revs),
+ .device_str = "STM32L45/L46xx",
+ .max_flash_size_kb = 512,
+ .has_dual_bank = false,
+ .flash_regs_base = 0x40022000,
+ .fsize_addr = 0x1FFF75E0,
+ },
+ {
+ .id = 0x464,
+ .revs = stm32_464_revs,
+ .num_revs = ARRAY_SIZE(stm32_464_revs),
+ .device_str = "STM32L41/L42xx",
+ .max_flash_size_kb = 128,
+ .has_dual_bank = false,
+ .flash_regs_base = 0x40022000,
+ .fsize_addr = 0x1FFF75E0,
+ },
+ {
+ .id = 0x466,
+ .revs = stm32_466_revs,
+ .num_revs = ARRAY_SIZE(stm32_466_revs),
+ .device_str = "STM32G03/G04xx",
+ .max_flash_size_kb = 64,
+ .has_dual_bank = false,
+ .flash_regs_base = 0x40022000,
+ .fsize_addr = 0x1FFF75E0,
+ },
+ {
+ .id = 0x468,
+ .revs = stm32_468_revs,
+ .num_revs = ARRAY_SIZE(stm32_468_revs),
+ .device_str = "STM32G43/G44xx",
+ .max_flash_size_kb = 128,
+ .has_dual_bank = false,
+ .flash_regs_base = 0x40022000,
+ .fsize_addr = 0x1FFF75E0,
+ },
+ {
+ .id = 0x469,
+ .revs = stm32_469_revs,
+ .num_revs = ARRAY_SIZE(stm32_469_revs),
+ .device_str = "STM32G47/G48xx",
+ .max_flash_size_kb = 512,
+ .has_dual_bank = true,
+ .flash_regs_base = 0x40022000,
+ .fsize_addr = 0x1FFF75E0,
+ },
+ {
+ .id = 0x470,
+ .revs = stm32_470_revs,
+ .num_revs = ARRAY_SIZE(stm32_470_revs),
+ .device_str = "STM32L4R/L4Sxx",
+ .max_flash_size_kb = 2048,
+ .has_dual_bank = true,
+ .flash_regs_base = 0x40022000,
+ .fsize_addr = 0x1FFF75E0,
+ },
+ {
+ .id = 0x471,
+ .revs = stm32_471_revs,
+ .num_revs = ARRAY_SIZE(stm32_471_revs),
+ .device_str = "STM32L4P5/L4Q5x",
+ .max_flash_size_kb = 1024,
+ .has_dual_bank = true,
+ .flash_regs_base = 0x40022000,
+ .fsize_addr = 0x1FFF75E0,
+ },
+ {
+ .id = 0x495,
+ .revs = stm32_495_revs,
+ .num_revs = ARRAY_SIZE(stm32_495_revs),
+ .device_str = "STM32WB5x",
+ .max_flash_size_kb = 1024,
+ .has_dual_bank = false,
+ .flash_regs_base = 0x58004000,
+ .fsize_addr = 0x1FFF75E0,
+ },
+ {
+ .id = 0x496,
+ .revs = stm32_496_revs,
+ .num_revs = ARRAY_SIZE(stm32_496_revs),
+ .device_str = "STM32WB3x",
+ .max_flash_size_kb = 512,
+ .has_dual_bank = false,
+ .flash_regs_base = 0x58004000,
+ .fsize_addr = 0x1FFF75E0,
+ },
+ {
+ .id = 0x497,
+ .revs = stm32_497_revs,
+ .num_revs = ARRAY_SIZE(stm32_497_revs),
+ .device_str = "STM32WLEx",
+ .max_flash_size_kb = 256,
+ .has_dual_bank = false,
+ .flash_regs_base = 0x58004000,
+ .fsize_addr = 0x1FFF75E0,
+ },
+};
+
+/* flash bank stm32l4x <base> <size> 0 0 <target#> */
FLASH_BANK_COMMAND_HANDLER(stm32l4_flash_bank_command)
{
struct stm32l4_flash_bank *stm32l4_info;
return ERROR_FAIL; /* Checkme: What better error to use?*/
bank->driver_priv = stm32l4_info;
- stm32l4_info->probed = 0;
+ /* The flash write must be aligned to a double word (8-bytes) boundary.
+ * Ask the flash infrastructure to ensure required alignment */
+ bank->write_start_alignment = bank->write_end_alignment = 8;
+
+ stm32l4_info->probed = false;
+ stm32l4_info->user_bank_size = bank->size;
return ERROR_OK;
}
-static inline int stm32l4_get_flash_reg(struct flash_bank *bank, uint32_t reg)
+static inline uint32_t stm32l4_get_flash_reg(struct flash_bank *bank, uint32_t reg_offset)
{
- return reg;
+ struct stm32l4_flash_bank *stm32l4_info = bank->driver_priv;
+ return stm32l4_info->part_info->flash_regs_base + reg_offset;
}
-static inline int stm32l4_get_flash_status(struct flash_bank *bank, uint32_t *status)
+static inline int stm32l4_read_flash_reg(struct flash_bank *bank, uint32_t reg_offset, uint32_t *value)
{
- struct target *target = bank->target;
- return target_read_u32(
- target, stm32l4_get_flash_reg(bank, STM32_FLASH_SR), status);
+ return target_read_u32(bank->target, stm32l4_get_flash_reg(bank, reg_offset), value);
+}
+
+static inline int stm32l4_write_flash_reg(struct flash_bank *bank, uint32_t reg_offset, uint32_t value)
+{
+ return target_write_u32(bank->target, stm32l4_get_flash_reg(bank, reg_offset), value);
}
static int stm32l4_wait_status_busy(struct flash_bank *bank, int timeout)
{
- struct target *target = bank->target;
uint32_t status;
int retval = ERROR_OK;
/* wait for busy to clear */
for (;;) {
- retval = stm32l4_get_flash_status(bank, &status);
+ retval = stm32l4_read_flash_reg(bank, STM32_FLASH_SR, &status);
if (retval != ERROR_OK)
return retval;
LOG_DEBUG("status: 0x%" PRIx32 "", status);
/* If this operation fails, we ignore it and report the original
* retval
*/
- target_write_u32(target, stm32l4_get_flash_reg(bank, STM32_FLASH_SR),
- status & FLASH_ERROR);
+ stm32l4_write_flash_reg(bank, STM32_FLASH_SR, status & FLASH_ERROR);
}
+
return retval;
}
-static int stm32l4_unlock_reg(struct target *target)
+static int stm32l4_unlock_reg(struct flash_bank *bank)
{
uint32_t ctrl;
/* first check if not already unlocked
* otherwise writing on STM32_FLASH_KEYR will fail
*/
- int retval = target_read_u32(target, STM32_FLASH_CR, &ctrl);
+ int retval = stm32l4_read_flash_reg(bank, STM32_FLASH_CR, &ctrl);
if (retval != ERROR_OK)
return retval;
return ERROR_OK;
/* unlock flash registers */
- retval = target_write_u32(target, STM32_FLASH_KEYR, KEY1);
+ retval = stm32l4_write_flash_reg(bank, STM32_FLASH_KEYR, KEY1);
if (retval != ERROR_OK)
return retval;
- retval = target_write_u32(target, STM32_FLASH_KEYR, KEY2);
+ retval = stm32l4_write_flash_reg(bank, STM32_FLASH_KEYR, KEY2);
if (retval != ERROR_OK)
return retval;
- retval = target_read_u32(target, STM32_FLASH_CR, &ctrl);
+ retval = stm32l4_read_flash_reg(bank, STM32_FLASH_CR, &ctrl);
if (retval != ERROR_OK)
return retval;
return ERROR_OK;
}
-static int stm32l4_unlock_option_reg(struct target *target)
+static int stm32l4_unlock_option_reg(struct flash_bank *bank)
{
uint32_t ctrl;
- int retval = target_read_u32(target, STM32_FLASH_CR, &ctrl);
+ int retval = stm32l4_read_flash_reg(bank, STM32_FLASH_CR, &ctrl);
if (retval != ERROR_OK)
return retval;
return ERROR_OK;
/* unlock option registers */
- retval = target_write_u32(target, STM32_FLASH_OPTKEYR, OPTKEY1);
+ retval = stm32l4_write_flash_reg(bank, STM32_FLASH_OPTKEYR, OPTKEY1);
if (retval != ERROR_OK)
return retval;
- retval = target_write_u32(target, STM32_FLASH_OPTKEYR, OPTKEY2);
+ retval = stm32l4_write_flash_reg(bank, STM32_FLASH_OPTKEYR, OPTKEY2);
if (retval != ERROR_OK)
return retval;
- retval = target_read_u32(target, STM32_FLASH_CR, &ctrl);
+ retval = stm32l4_read_flash_reg(bank, STM32_FLASH_CR, &ctrl);
if (retval != ERROR_OK)
return retval;
return ERROR_OK;
}
-static int stm32l4_read_option(struct flash_bank *bank, uint32_t address, uint32_t* value)
-{
- struct target *target = bank->target;
- return target_read_u32(target, address, value);
-}
-
-static int stm32l4_write_option(struct flash_bank *bank, uint32_t address, uint32_t value, uint32_t mask)
+static int stm32l4_write_option(struct flash_bank *bank, uint32_t reg_offset,
+ uint32_t value, uint32_t mask)
{
- struct target *target = bank->target;
uint32_t optiondata;
+ int retval, retval2;
- int retval = target_read_u32(target, address, &optiondata);
+ retval = stm32l4_read_flash_reg(bank, reg_offset, &optiondata);
if (retval != ERROR_OK)
return retval;
- retval = stm32l4_unlock_reg(target);
+ retval = stm32l4_unlock_reg(bank);
if (retval != ERROR_OK)
- return retval;
+ goto err_lock;
- retval = stm32l4_unlock_option_reg(target);
+ retval = stm32l4_unlock_option_reg(bank);
if (retval != ERROR_OK)
- return retval;
+ goto err_lock;
optiondata = (optiondata & ~mask) | (value & mask);
- retval = target_write_u32(target, address, optiondata);
+ retval = stm32l4_write_flash_reg(bank, reg_offset, optiondata);
if (retval != ERROR_OK)
- return retval;
+ goto err_lock;
- retval = target_write_u32(target, stm32l4_get_flash_reg(bank, STM32_FLASH_CR), FLASH_OPTSTRT);
+ retval = stm32l4_write_flash_reg(bank, STM32_FLASH_CR, FLASH_OPTSTRT);
if (retval != ERROR_OK)
- return retval;
+ goto err_lock;
retval = stm32l4_wait_status_busy(bank, FLASH_ERASE_TIMEOUT);
+
+err_lock:
+ retval2 = stm32l4_write_flash_reg(bank, STM32_FLASH_CR, FLASH_LOCK | FLASH_OPTLOCK);
+
if (retval != ERROR_OK)
return retval;
- return retval;
+ return retval2;
}
static int stm32l4_protect_check(struct flash_bank *bank)
{
struct stm32l4_flash_bank *stm32l4_info = bank->driver_priv;
+
uint32_t wrp1ar, wrp1br, wrp2ar, wrp2br;
- stm32l4_read_option(bank, STM32_FLASH_WRP1AR, &wrp1ar);
- stm32l4_read_option(bank, STM32_FLASH_WRP1BR, &wrp1br);
- stm32l4_read_option(bank, STM32_FLASH_WRP2AR, &wrp2ar);
- stm32l4_read_option(bank, STM32_FLASH_WRP2BR, &wrp2br);
-
- const uint8_t wrp1a_start = wrp1ar & 0xFF;
- const uint8_t wrp1a_end = (wrp1ar >> 16) & 0xFF;
- const uint8_t wrp1b_start = wrp1br & 0xFF;
- const uint8_t wrp1b_end = (wrp1br >> 16) & 0xFF;
- const uint8_t wrp2a_start = wrp2ar & 0xFF;
- const uint8_t wrp2a_end = (wrp2ar >> 16) & 0xFF;
- const uint8_t wrp2b_start = wrp2br & 0xFF;
- const uint8_t wrp2b_end = (wrp2br >> 16) & 0xFF;
+ stm32l4_read_flash_reg(bank, STM32_FLASH_WRP1AR, &wrp1ar);
+ stm32l4_read_flash_reg(bank, STM32_FLASH_WRP1BR, &wrp1br);
+ if (stm32l4_info->part_info->has_dual_bank) {
+ stm32l4_read_flash_reg(bank, STM32_FLASH_WRP2AR, &wrp2ar);
+ stm32l4_read_flash_reg(bank, STM32_FLASH_WRP2BR, &wrp2br);
+ } else {
+ /* prevent unintialized errors */
+ wrp2ar = 0;
+ wrp2br = 0;
+ }
+
+ const uint8_t wrp1a_start = wrp1ar & stm32l4_info->wrpxxr_mask;
+ const uint8_t wrp1a_end = (wrp1ar >> 16) & stm32l4_info->wrpxxr_mask;
+ const uint8_t wrp1b_start = wrp1br & stm32l4_info->wrpxxr_mask;
+ const uint8_t wrp1b_end = (wrp1br >> 16) & stm32l4_info->wrpxxr_mask;
+ const uint8_t wrp2a_start = wrp2ar & stm32l4_info->wrpxxr_mask;
+ const uint8_t wrp2a_end = (wrp2ar >> 16) & stm32l4_info->wrpxxr_mask;
+ const uint8_t wrp2b_start = wrp2br & stm32l4_info->wrpxxr_mask;
+ const uint8_t wrp2b_end = (wrp2br >> 16) & stm32l4_info->wrpxxr_mask;
for (int i = 0; i < bank->num_sectors; i++) {
- if (i < stm32l4_info->bank2_start) {
+ if (i < stm32l4_info->bank1_sectors) {
if (((i >= wrp1a_start) &&
(i <= wrp1a_end)) ||
((i >= wrp1b_start) &&
else
bank->sectors[i].is_protected = 0;
} else {
+ assert(stm32l4_info->part_info->has_dual_bank == true);
uint8_t snb;
- snb = i - stm32l4_info->bank2_start + 256;
+ snb = i - stm32l4_info->bank1_sectors;
if (((snb >= wrp2a_start) &&
(snb <= wrp2a_end)) ||
((snb >= wrp2b_start) &&
static int stm32l4_erase(struct flash_bank *bank, int first, int last)
{
- struct target *target = bank->target;
+ struct stm32l4_flash_bank *stm32l4_info = bank->driver_priv;
int i;
+ int retval, retval2;
- assert(first < bank->num_sectors);
- assert(last < bank->num_sectors);
+ assert((0 <= first) && (first <= last) && (last < bank->num_sectors));
if (bank->target->state != TARGET_HALTED) {
LOG_ERROR("Target not halted");
return ERROR_TARGET_NOT_HALTED;
}
- int retval;
- retval = stm32l4_unlock_reg(target);
+ retval = stm32l4_unlock_reg(bank);
if (retval != ERROR_OK)
- return retval;
+ goto err_lock;
/*
Sector Erase
To erase a sector, follow the procedure below:
1. Check that no Flash memory operation is ongoing by
- checking the BSY bit in the FLASH_SR register
+ checking the BSY bit in the FLASH_SR register
2. Set the PER bit and select the page and bank
- you wish to erase in the FLASH_CR register
+ you wish to erase in the FLASH_CR register
3. Set the STRT bit in the FLASH_CR register
4. Wait for the BSY bit to be cleared
*/
- struct stm32l4_flash_bank *stm32l4_info = bank->driver_priv;
for (i = first; i <= last; i++) {
uint32_t erase_flags;
erase_flags = FLASH_PER | FLASH_STRT;
- if (i >= stm32l4_info->bank2_start) {
+ if (i >= stm32l4_info->bank1_sectors) {
uint8_t snb;
- snb = (i - stm32l4_info->bank2_start) + 256;
+ snb = i - stm32l4_info->bank1_sectors;
erase_flags |= snb << FLASH_PAGE_SHIFT | FLASH_CR_BKER;
} else
erase_flags |= i << FLASH_PAGE_SHIFT;
- retval = target_write_u32(target,
- stm32l4_get_flash_reg(bank, STM32_FLASH_CR), erase_flags);
+ retval = stm32l4_write_flash_reg(bank, STM32_FLASH_CR, erase_flags);
if (retval != ERROR_OK)
- return retval;
+ break;
retval = stm32l4_wait_status_busy(bank, FLASH_ERASE_TIMEOUT);
if (retval != ERROR_OK)
- return retval;
+ break;
bank->sectors[i].is_erased = 1;
}
- retval = target_write_u32(
- target, stm32l4_get_flash_reg(bank, STM32_FLASH_CR), FLASH_LOCK);
+err_lock:
+ retval2 = stm32l4_write_flash_reg(bank, STM32_FLASH_CR, FLASH_LOCK);
+
if (retval != ERROR_OK)
return retval;
- return ERROR_OK;
+ return retval2;
}
static int stm32l4_protect(struct flash_bank *bank, int set, int first, int last)
int ret = ERROR_OK;
/* Bank 2 */
uint32_t reg_value = 0xFF; /* Default to bank un-protected */
- if (last >= stm32l4_info->bank2_start) {
+ if (last >= stm32l4_info->bank1_sectors) {
if (set == 1) {
- uint8_t begin = first > stm32l4_info->bank2_start ? first : 0x00;
+ uint8_t begin = first > stm32l4_info->bank1_sectors ? first : 0x00;
reg_value = ((last & 0xFF) << 16) | begin;
}
}
/* Bank 1 */
reg_value = 0xFF; /* Default to bank un-protected */
- if (first < stm32l4_info->bank2_start) {
+ if (first < stm32l4_info->bank1_sectors) {
if (set == 1) {
- uint8_t end = last >= stm32l4_info->bank2_start ? 0xFF : last;
+ uint8_t end = last >= stm32l4_info->bank1_sectors ? 0xFF : last;
reg_value = (end << 16) | (first & 0xFF);
}
return ret;
}
-/* Count is in halfwords */
+/* Count is in double-words */
static int stm32l4_write_block(struct flash_bank *bank, const uint8_t *buffer,
- uint32_t offset, uint32_t count)
+ uint32_t offset, uint32_t count)
{
struct target *target = bank->target;
- uint32_t buffer_size = 16384;
+ struct stm32l4_flash_bank *stm32l4_info = bank->driver_priv;
+ uint32_t buffer_size;
struct working_area *write_algorithm;
struct working_area *source;
uint32_t address = bank->base + offset;
- struct reg_param reg_params[5];
+ struct reg_param reg_params[6];
struct armv7m_algorithm armv7m_info;
int retval = ERROR_OK;
return retval;
}
- /* memory buffer */
- while (target_alloc_working_area_try(target, buffer_size, &source) !=
- ERROR_OK) {
- buffer_size /= 2;
- if (buffer_size <= 256) {
- /* we already allocated the writing code, but failed to get a
- * buffer, free the algorithm */
- target_free_working_area(target, write_algorithm);
+ /* memory buffer, size *must* be multiple of dword plus one dword for rp and one for wp */
+ buffer_size = target_get_working_area_avail(target) & ~(2 * sizeof(uint32_t) - 1);
+ if (buffer_size < 256) {
+ LOG_WARNING("large enough working area not available, can't do block memory writes");
+ return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
+ } else if (buffer_size > 16384) {
+ /* probably won't benefit from more than 16k ... */
+ buffer_size = 16384;
+ }
- LOG_WARNING("no large enough working area available, can't do block memory writes");
- return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
- }
+ if (target_alloc_working_area_try(target, buffer_size, &source) != ERROR_OK) {
+ LOG_ERROR("allocating working area failed");
+ return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
}
armv7m_info.common_magic = ARMV7M_COMMON_MAGIC;
init_reg_param(®_params[1], "r1", 32, PARAM_OUT); /* buffer end */
init_reg_param(®_params[2], "r2", 32, PARAM_OUT); /* target address */
init_reg_param(®_params[3], "r3", 32, PARAM_OUT); /* count (double word-64bit) */
- init_reg_param(®_params[4], "r4", 32, PARAM_OUT); /* flash base */
+ init_reg_param(®_params[4], "r4", 32, PARAM_OUT); /* flash status register */
+ init_reg_param(®_params[5], "r5", 32, PARAM_OUT); /* flash control register */
buf_set_u32(reg_params[0].value, 0, 32, source->address);
buf_set_u32(reg_params[1].value, 0, 32, source->address + source->size);
buf_set_u32(reg_params[2].value, 0, 32, address);
- buf_set_u32(reg_params[3].value, 0, 32, count / 4);
- buf_set_u32(reg_params[4].value, 0, 32, STM32_FLASH_BASE);
+ buf_set_u32(reg_params[3].value, 0, 32, count);
+ buf_set_u32(reg_params[4].value, 0, 32, stm32l4_info->part_info->flash_regs_base + STM32_FLASH_SR);
+ buf_set_u32(reg_params[5].value, 0, 32, stm32l4_info->part_info->flash_regs_base + STM32_FLASH_CR);
- retval = target_run_flash_async_algorithm(target, buffer, count, 2,
+ retval = target_run_flash_async_algorithm(target, buffer, count, 8,
0, NULL,
- 5, reg_params,
+ ARRAY_SIZE(reg_params), reg_params,
source->address, source->size,
write_algorithm->address, 0,
&armv7m_info);
if (error != 0) {
LOG_ERROR("flash write failed = %08" PRIx32, error);
/* Clear but report errors */
- target_write_u32(target, STM32_FLASH_SR, error);
+ stm32l4_write_flash_reg(bank, STM32_FLASH_SR, error);
retval = ERROR_FAIL;
}
}
destroy_reg_param(®_params[2]);
destroy_reg_param(®_params[3]);
destroy_reg_param(®_params[4]);
+ destroy_reg_param(®_params[5]);
return retval;
}
static int stm32l4_write(struct flash_bank *bank, const uint8_t *buffer,
- uint32_t offset, uint32_t count)
+ uint32_t offset, uint32_t count)
{
- struct target *target = bank->target;
- int retval;
+ int retval = ERROR_OK, retval2;
if (bank->target->state != TARGET_HALTED) {
LOG_ERROR("Target not halted");
return ERROR_TARGET_NOT_HALTED;
}
- if (offset & 0x7) {
- LOG_WARNING("offset 0x%" PRIx32 " breaks required 8-byte alignment",
- offset);
- return ERROR_FLASH_DST_BREAKS_ALIGNMENT;
+ /* The flash write must be aligned to a double word (8-bytes) boundary.
+ * The flash infrastructure ensures it, do just a security check */
+ assert(offset % 8 == 0);
+ assert(count % 8 == 0);
+
+ /* STM32G4xxx Cat. 3 devices may have gaps between banks, check whether
+ * data to be written does not go into a gap:
+ * suppose buffer is fully contained in bank from sector 0 to sector
+ * num->sectors - 1 and sectors are ordered according to offset
+ */
+ struct flash_sector *head = &bank->sectors[0];
+ struct flash_sector *tail = &bank->sectors[bank->num_sectors - 1];
+
+ while ((head < tail) && (offset >= (head + 1)->offset)) {
+ /* buffer does not intersect head nor gap behind head */
+ head++;
}
- if (count & 0x7) {
- LOG_WARNING("Padding %d bytes to keep 8-byte write size",
- count & 7);
- count = (count + 7) & ~7;
- /* This pads the write chunk with random bytes by overrunning the
- * write buffer. Padding with the erased pattern 0xff is purely
- * cosmetical, as 8-byte flash words are ECC secured and the first
- * write will program the ECC bits. A second write would need
- * to reprogramm these ECC bits.
- * But this can only be done after erase!
- */
+ while ((head < tail) && (offset + count <= (tail - 1)->offset + (tail - 1)->size)) {
+ /* buffer does not intersect tail nor gap before tail */
+ --tail;
+ }
+
+ LOG_DEBUG("data: 0x%08" PRIx32 " - 0x%08" PRIx32 ", sectors: 0x%08" PRIx32 " - 0x%08" PRIx32,
+ offset, offset + count - 1, head->offset, tail->offset + tail->size - 1);
+
+ /* Now check that there is no gap from head to tail, this should work
+ * even for multiple or non-symmetric gaps
+ */
+ while (head < tail) {
+ if (head->offset + head->size != (head + 1)->offset) {
+ LOG_ERROR("write into gap from " TARGET_ADDR_FMT " to " TARGET_ADDR_FMT,
+ bank->base + head->offset + head->size,
+ bank->base + (head + 1)->offset - 1);
+ retval = ERROR_FLASH_DST_OUT_OF_BANK;
+ }
+ head++;
}
- retval = stm32l4_unlock_reg(target);
if (retval != ERROR_OK)
return retval;
- /* Only full double words (8-byte) can be programmed*/
- retval = stm32l4_write_block(bank, buffer, offset, count / 2);
+ retval = stm32l4_unlock_reg(bank);
+ if (retval != ERROR_OK)
+ goto err_lock;
+
+ retval = stm32l4_write_block(bank, buffer, offset, count / 8);
+
+err_lock:
+ retval2 = stm32l4_write_flash_reg(bank, STM32_FLASH_CR, FLASH_LOCK);
+
if (retval != ERROR_OK) {
- LOG_WARNING("block write failed");
+ LOG_ERROR("block write failed");
return retval;
+ }
+ return retval2;
+}
+
+static int stm32l4_read_idcode(struct flash_bank *bank, uint32_t *id)
+{
+ int retval;
+
+ /* try stm32l4/l4+/wb/g4 id register first, then stm32g0 id register */
+ retval = target_read_u32(bank->target, DBGMCU_IDCODE_L4_G4, id);
+ if ((retval != ERROR_OK) || ((*id & 0xfff) == 0) || ((*id & 0xfff) == 0xfff)) {
+ retval = target_read_u32(bank->target, DBGMCU_IDCODE_G0, id);
+ if ((retval != ERROR_OK) || ((*id & 0xfff) == 0) || ((*id & 0xfff) == 0xfff)) {
+ LOG_ERROR("can't get device id");
+ return (retval == ERROR_OK) ? ERROR_FAIL : retval;
}
+ }
- LOG_WARNING("block write succeeded");
- return target_write_u32(target, STM32_FLASH_CR, FLASH_LOCK);
+ return retval;
}
static int stm32l4_probe(struct flash_bank *bank)
{
struct target *target = bank->target;
struct stm32l4_flash_bank *stm32l4_info = bank->driver_priv;
- int i;
- uint16_t flash_size_in_kb = 0xffff;
- uint16_t max_flash_size_in_kb;
+ const struct stm32l4_part_info *part_info;
+ uint16_t flash_size_kb = 0xffff;
uint32_t device_id;
uint32_t options;
- uint32_t base_address = 0x08000000;
- stm32l4_info->probed = 0;
+ stm32l4_info->probed = false;
- /* read stm32 device id register */
- int retval = target_read_u32(target, DBGMCU_IDCODE, &device_id);
+ /* read stm32 device id registers */
+ int retval = stm32l4_read_idcode(bank, &stm32l4_info->idcode);
if (retval != ERROR_OK)
return retval;
- LOG_INFO("device id = 0x%08" PRIx32 "", device_id);
- /* set max flash size depending on family */
- switch (device_id & 0xfff) {
- case 0x461:
- case 0x415:
- max_flash_size_in_kb = 1024;
- break;
- case 0x462:
- max_flash_size_in_kb = 512;
- break;
- case 0x435:
- max_flash_size_in_kb = 256;
- break;
- default:
- LOG_WARNING("Cannot identify target as a STM32L4 family.");
+ device_id = stm32l4_info->idcode & 0xFFF;
+
+ for (unsigned int n = 0; n < ARRAY_SIZE(stm32l4_parts); n++) {
+ if (device_id == stm32l4_parts[n].id)
+ stm32l4_info->part_info = &stm32l4_parts[n];
+ }
+
+ if (!stm32l4_info->part_info) {
+ LOG_WARNING("Cannot identify target as an %s family device.", device_families);
return ERROR_FAIL;
}
+ part_info = stm32l4_info->part_info;
+
+ char device_info[1024];
+ retval = bank->driver->info(bank, device_info, sizeof(device_info));
+ if (retval != ERROR_OK)
+ return retval;
+
+ LOG_INFO("device idcode = 0x%08" PRIx32 " (%s)", stm32l4_info->idcode, device_info);
+
/* get flash size from target. */
- retval = target_read_u16(target, FLASH_SIZE_REG, &flash_size_in_kb);
+ retval = target_read_u16(target, part_info->fsize_addr, &flash_size_kb);
/* failed reading flash size or flash size invalid (early silicon),
* default to max target family */
- if (retval != ERROR_OK || flash_size_in_kb == 0xffff || flash_size_in_kb == 0) {
+ if (retval != ERROR_OK || flash_size_kb == 0xffff || flash_size_kb == 0
+ || flash_size_kb > part_info->max_flash_size_kb) {
LOG_WARNING("STM32 flash size failed, probe inaccurate - assuming %dk flash",
- max_flash_size_in_kb);
- flash_size_in_kb = max_flash_size_in_kb;
+ part_info->max_flash_size_kb);
+ flash_size_kb = part_info->max_flash_size_kb;
}
- LOG_INFO("flash size = %dkbytes", flash_size_in_kb);
+ /* if the user sets the size manually then ignore the probed value
+ * this allows us to work around devices that have a invalid flash size register value */
+ if (stm32l4_info->user_bank_size) {
+ LOG_WARNING("overriding size register by configured bank size - MAY CAUSE TROUBLE");
+ flash_size_kb = stm32l4_info->user_bank_size / 1024;
+ }
- /* did we assign flash size? */
- assert(flash_size_in_kb != 0xffff);
+ LOG_INFO("flash size = %dkbytes", flash_size_kb);
- /* get options to for DUAL BANK. */
- retval = target_read_u32(target, STM32_FLASH_OPTR, &options);
+ /* did we assign a flash size? */
+ assert((flash_size_kb != 0xffff) && flash_size_kb);
+ /* read flash option register */
+ retval = stm32l4_read_flash_reg(bank, STM32_FLASH_OPTR, &options);
if (retval != ERROR_OK)
return retval;
- /* did we assign flash size? */
- assert((flash_size_in_kb != 0xffff) && flash_size_in_kb);
+ stm32l4_info->bank1_sectors = 0;
+ stm32l4_info->hole_sectors = 0;
- /* calculate numbers of pages */
- int num_pages = flash_size_in_kb / 2;
+ int num_pages = 0;
+ int page_size_kb = 0;
+
+ stm32l4_info->dual_bank_mode = false;
+
+ switch (device_id) {
+ case 0x415: /* STM32L47/L48xx */
+ case 0x461: /* STM32L49/L4Axx */
+ /* if flash size is max (1M) the device is always dual bank
+ * 0x415: has variants with 512K
+ * 0x461: has variants with 512 and 256
+ * for these variants:
+ * if DUAL_BANK = 0 -> single bank
+ * else -> dual bank without gap
+ * note: the page size is invariant
+ */
+ page_size_kb = 2;
+ num_pages = flash_size_kb / page_size_kb;
+ stm32l4_info->bank1_sectors = num_pages;
+
+ /* check DUAL_BANK bit[21] if the flash is less than 1M */
+ if (flash_size_kb == 1024 || (options & BIT(21))) {
+ stm32l4_info->dual_bank_mode = true;
+ stm32l4_info->bank1_sectors = num_pages / 2;
+ }
+ break;
+ case 0x435: /* STM32L43/L44xx */
+ case 0x460: /* STM32G07/G08xx */
+ case 0x462: /* STM32L45/L46xx */
+ case 0x464: /* STM32L41/L42xx */
+ case 0x466: /* STM32G03/G04xx */
+ case 0x468: /* STM32G43/G44xx */
+ case 0x497: /* STM32WLEx */
+ /* single bank flash */
+ page_size_kb = 2;
+ num_pages = flash_size_kb / page_size_kb;
+ stm32l4_info->bank1_sectors = num_pages;
+ break;
+ case 0x469: /* STM32G47/G48xx */
+ /* STM32G47/8 can be single/dual bank:
+ * if DUAL_BANK = 0 -> single bank
+ * else -> dual bank WITH gap
+ */
+ page_size_kb = 4;
+ num_pages = flash_size_kb / page_size_kb;
+ stm32l4_info->bank1_sectors = num_pages;
+ if (options & BIT(22)) {
+ stm32l4_info->dual_bank_mode = true;
+ page_size_kb = 2;
+ num_pages = flash_size_kb / page_size_kb;
+ stm32l4_info->bank1_sectors = num_pages / 2;
+
+ /* for devices with trimmed flash, there is a gap between both banks */
+ stm32l4_info->hole_sectors =
+ (part_info->max_flash_size_kb - flash_size_kb) / (2 * page_size_kb);
+ }
+ break;
+ case 0x470: /* STM32L4R/L4Sxx */
+ case 0x471: /* STM32L4P5/L4Q5x */
+ /* STM32L4R/S can be single/dual bank:
+ * if size = 2M check DBANK bit(22)
+ * if size = 1M check DB1M bit(21)
+ * STM32L4P/Q can be single/dual bank
+ * if size = 1M check DBANK bit(22)
+ * if size = 512K check DB512K bit(21)
+ */
+ page_size_kb = 8;
+ num_pages = flash_size_kb / page_size_kb;
+ stm32l4_info->bank1_sectors = num_pages;
+ const bool use_dbank_bit = flash_size_kb == part_info->max_flash_size_kb;
+ if ((use_dbank_bit && (options & BIT(22))) ||
+ (!use_dbank_bit && (options & BIT(21)))) {
+ stm32l4_info->dual_bank_mode = true;
+ page_size_kb = 4;
+ num_pages = flash_size_kb / page_size_kb;
+ stm32l4_info->bank1_sectors = num_pages / 2;
+ }
+ break;
+ case 0x495: /* STM32WB5x */
+ case 0x496: /* STM32WB3x */
+ /* single bank flash */
+ page_size_kb = 4;
+ num_pages = flash_size_kb / page_size_kb;
+ stm32l4_info->bank1_sectors = num_pages;
+ break;
+ default:
+ LOG_ERROR("unsupported device");
+ return ERROR_FAIL;
+ }
- /* check that calculation result makes sense */
- assert(num_pages > 0);
+ LOG_INFO("flash mode : %s-bank", stm32l4_info->dual_bank_mode ? "dual" : "single");
- /* only devices with < 1024 kiB may be set to single bank dual banks */
- if ((flash_size_in_kb == 1024) || !(options & OPT_DUALBANK))
- stm32l4_info->bank2_start = 256;
- else
- stm32l4_info->bank2_start = num_pages / 2;
+ const int gap_size_kb = stm32l4_info->hole_sectors * page_size_kb;
+
+ if (gap_size_kb != 0) {
+ LOG_INFO("gap detected from 0x%08" PRIx32 " to 0x%08" PRIx32,
+ STM32_FLASH_BANK_BASE + stm32l4_info->bank1_sectors
+ * page_size_kb * 1024,
+ STM32_FLASH_BANK_BASE + (stm32l4_info->bank1_sectors
+ * page_size_kb + gap_size_kb) * 1024 - 1);
+ }
+
+ /* number of significant bits in WRPxxR differs per device,
+ * always right adjusted, on some devices non-implemented
+ * bits read as '0', on others as '1' ...
+ * notably G4 Cat. 2 implement only 6 bits, contradicting the RM
+ */
+
+ /* use *max_flash_size* instead of actual size as the trimmed versions
+ * certainly use the same number of bits
+ * max_flash_size is always power of two, so max_pages too
+ */
+ uint32_t max_pages = stm32l4_info->part_info->max_flash_size_kb / page_size_kb;
+ assert((max_pages & (max_pages - 1)) == 0);
+
+ /* in dual bank mode number of pages is doubled, but extra bit is bank selection */
+ stm32l4_info->wrpxxr_mask = ((max_pages >> (stm32l4_info->dual_bank_mode ? 1 : 0)) - 1);
+ assert((stm32l4_info->wrpxxr_mask & 0xFFFF0000) == 0);
+ LOG_DEBUG("WRPxxR mask 0x%04" PRIx16, stm32l4_info->wrpxxr_mask);
if (bank->sectors) {
free(bank->sectors);
bank->sectors = NULL;
}
- bank->base = base_address;
- bank->size = num_pages * (1 << 11);
+ bank->size = (flash_size_kb + gap_size_kb) * 1024;
+ bank->base = STM32_FLASH_BANK_BASE;
bank->num_sectors = num_pages;
- bank->sectors = malloc(sizeof(struct flash_sector) * num_pages);
- if (!bank->sectors)
- return ERROR_FAIL; /* Checkme: What better error to use?*/
+ bank->sectors = malloc(sizeof(struct flash_sector) * bank->num_sectors);
+ if (bank->sectors == NULL) {
+ LOG_ERROR("failed to allocate bank sectors");
+ return ERROR_FAIL;
+ }
- for (i = 0; i < num_pages; i++) {
- bank->sectors[i].offset = i << 11;
- bank->sectors[i].size = 1 << 11;
+ for (int i = 0; i < bank->num_sectors; i++) {
+ bank->sectors[i].offset = i * page_size_kb * 1024;
+ /* in dual bank configuration, if there is a gap between banks
+ * we fix up the sector offset to consider this gap */
+ if (i >= stm32l4_info->bank1_sectors && stm32l4_info->hole_sectors)
+ bank->sectors[i].offset += gap_size_kb * 1024;
+ bank->sectors[i].size = page_size_kb * 1024;
bank->sectors[i].is_erased = -1;
bank->sectors[i].is_protected = 1;
}
- stm32l4_info->probed = 1;
-
+ stm32l4_info->probed = true;
return ERROR_OK;
}
struct stm32l4_flash_bank *stm32l4_info = bank->driver_priv;
if (stm32l4_info->probed)
return ERROR_OK;
+
return stm32l4_probe(bank);
}
static int get_stm32l4_info(struct flash_bank *bank, char *buf, int buf_size)
{
- struct target *target = bank->target;
- uint32_t dbgmcu_idcode;
-
- /* read stm32 device id register */
- int retval = target_read_u32(target, DBGMCU_IDCODE, &dbgmcu_idcode);
- if (retval != ERROR_OK)
- return retval;
-
- uint16_t device_id = dbgmcu_idcode & 0xfff;
- uint8_t rev_id = dbgmcu_idcode >> 28;
- uint8_t rev_minor = 0;
- int i;
-
- for (i = 16; i < 28; i++) {
- if (dbgmcu_idcode & (1 << i))
- rev_minor++;
- else
- break;
- }
-
- const char *device_str;
-
- switch (device_id) {
- case 0x461:
- device_str = "STM32L496/4A6";
- break;
-
- case 0x415:
- device_str = "STM32L475/476/486";
- break;
-
- case 0x462:
- device_str = "STM32L45x/46x";
- break;
-
- case 0x435:
- device_str = "STM32L43x/44x";
- break;
+ struct stm32l4_flash_bank *stm32l4_info = bank->driver_priv;
+ const struct stm32l4_part_info *part_info = stm32l4_info->part_info;
+
+ if (part_info) {
+ const char *rev_str = NULL;
+ uint16_t rev_id = stm32l4_info->idcode >> 16;
+ for (unsigned int i = 0; i < part_info->num_revs; i++) {
+ if (rev_id == part_info->revs[i].rev) {
+ rev_str = part_info->revs[i].str;
+
+ if (rev_str != NULL) {
+ snprintf(buf, buf_size, "%s - Rev: %s%s",
+ part_info->device_str, rev_str, stm32l4_info->probed ?
+ (stm32l4_info->dual_bank_mode ? " dual-bank" : " single-bank") : "");
+ return ERROR_OK;
+ }
+ }
+ }
- default:
- snprintf(buf, buf_size, "Cannot identify target as a STM32L4\n");
+ snprintf(buf, buf_size, "%s - Rev: unknown (0x%04x)%s",
+ part_info->device_str, rev_id, stm32l4_info->probed ?
+ (stm32l4_info->dual_bank_mode ? " dual-bank" : " single-bank") : "");
+ return ERROR_OK;
+ } else {
+ snprintf(buf, buf_size, "Cannot identify target as an %s device", device_families);
return ERROR_FAIL;
}
- snprintf(buf, buf_size, "%s - Rev: %1d.%02d",
- device_str, rev_id, rev_minor);
-
return ERROR_OK;
}
-static int stm32l4_mass_erase(struct flash_bank *bank, uint32_t action)
+static int stm32l4_mass_erase(struct flash_bank *bank)
{
- int retval;
+ int retval, retval2;
struct target *target = bank->target;
+ struct stm32l4_flash_bank *stm32l4_info = bank->driver_priv;
+
+ uint32_t action = FLASH_MER1;
+
+ if (stm32l4_info->part_info->has_dual_bank)
+ action |= FLASH_MER2;
if (target->state != TARGET_HALTED) {
LOG_ERROR("Target not halted");
return ERROR_TARGET_NOT_HALTED;
}
- retval = stm32l4_unlock_reg(target);
+ retval = stm32l4_unlock_reg(bank);
if (retval != ERROR_OK)
- return retval;
+ goto err_lock;
/* mass erase flash memory */
- retval = target_write_u32(
- target, stm32l4_get_flash_reg(bank, STM32_FLASH_CR), action);
+ retval = stm32l4_wait_status_busy(bank, FLASH_ERASE_TIMEOUT / 10);
if (retval != ERROR_OK)
- return retval;
- retval = target_write_u32(
- target, stm32l4_get_flash_reg(bank, STM32_FLASH_CR),
- action | FLASH_STRT);
+ goto err_lock;
+
+ retval = stm32l4_write_flash_reg(bank, STM32_FLASH_CR, action);
if (retval != ERROR_OK)
- return retval;
+ goto err_lock;
- retval = stm32l4_wait_status_busy(bank, FLASH_ERASE_TIMEOUT);
+ retval = stm32l4_write_flash_reg(bank, STM32_FLASH_CR, action | FLASH_STRT);
if (retval != ERROR_OK)
- return retval;
+ goto err_lock;
+
+ retval = stm32l4_wait_status_busy(bank, FLASH_ERASE_TIMEOUT);
+
+err_lock:
+ retval2 = stm32l4_write_flash_reg(bank, STM32_FLASH_CR, FLASH_LOCK);
- retval = target_write_u32(
- target, stm32l4_get_flash_reg(bank, STM32_FLASH_CR), FLASH_LOCK);
if (retval != ERROR_OK)
return retval;
- return ERROR_OK;
+ return retval2;
}
COMMAND_HANDLER(stm32l4_handle_mass_erase_command)
{
- int i;
- uint32_t action;
-
if (CMD_ARGC < 1) {
- command_print(CMD_CTX, "stm32l4x mass_erase <STM32L4 bank>");
+ command_print(CMD, "stm32l4x mass_erase <STM32L4 bank>");
return ERROR_COMMAND_SYNTAX_ERROR;
}
if (ERROR_OK != retval)
return retval;
- action = FLASH_MER1 | FLASH_MER2;
- retval = stm32l4_mass_erase(bank, action);
+ retval = stm32l4_mass_erase(bank);
if (retval == ERROR_OK) {
/* set all sectors as erased */
- for (i = 0; i < bank->num_sectors; i++)
+ for (int i = 0; i < bank->num_sectors; i++)
bank->sectors[i].is_erased = 1;
- command_print(CMD_CTX, "stm32l4x mass erase complete");
+ command_print(CMD, "stm32l4x mass erase complete");
} else {
- command_print(CMD_CTX, "stm32l4x mass erase failed");
+ command_print(CMD, "stm32l4x mass erase failed");
}
return retval;
COMMAND_HANDLER(stm32l4_handle_option_read_command)
{
if (CMD_ARGC < 2) {
- command_print(CMD_CTX, "stm32l4x option_read <STM32L4 bank> <option_reg offset>");
+ command_print(CMD, "stm32l4x option_read <STM32L4 bank> <option_reg offset>");
return ERROR_COMMAND_SYNTAX_ERROR;
}
if (ERROR_OK != retval)
return retval;
- uint32_t reg_addr = STM32_FLASH_BASE;
+ uint32_t reg_offset, reg_addr;
uint32_t value = 0;
- reg_addr += strtoul(CMD_ARGV[1], NULL, 16);
+ reg_offset = strtoul(CMD_ARGV[1], NULL, 16);
+ reg_addr = stm32l4_get_flash_reg(bank, reg_offset);
- retval = stm32l4_read_option(bank, reg_addr, &value);
+ retval = stm32l4_read_flash_reg(bank, reg_offset, &value);
if (ERROR_OK != retval)
return retval;
- command_print(CMD_CTX, "Option Register: <0x%" PRIx32 "> = 0x%" PRIx32 "", reg_addr, value);
+ command_print(CMD, "Option Register: <0x%" PRIx32 "> = 0x%" PRIx32 "", reg_addr, value);
return retval;
}
COMMAND_HANDLER(stm32l4_handle_option_write_command)
{
if (CMD_ARGC < 3) {
- command_print(CMD_CTX, "stm32l4x option_write <STM32L4 bank> <option_reg offset> <value> [mask]");
+ command_print(CMD, "stm32l4x option_write <STM32L4 bank> <option_reg offset> <value> [mask]");
return ERROR_COMMAND_SYNTAX_ERROR;
}
if (ERROR_OK != retval)
return retval;
- uint32_t reg_addr = STM32_FLASH_BASE;
+ uint32_t reg_offset;
uint32_t value = 0;
uint32_t mask = 0xFFFFFFFF;
- reg_addr += strtoul(CMD_ARGV[1], NULL, 16);
+ reg_offset = strtoul(CMD_ARGV[1], NULL, 16);
value = strtoul(CMD_ARGV[2], NULL, 16);
if (CMD_ARGC > 3)
mask = strtoul(CMD_ARGV[3], NULL, 16);
- command_print(CMD_CTX, "%s Option written.\n"
+ command_print(CMD, "%s Option written.\n"
"INFO: a reset or power cycle is required "
"for the new settings to take effect.", bank->driver->name);
- retval = stm32l4_write_option(bank, reg_addr, value, mask);
+ retval = stm32l4_write_option(bank, reg_offset, value, mask);
return retval;
}
if (ERROR_OK != retval)
return retval;
- struct target *target = bank->target;
-
- retval = stm32l4_unlock_reg(target);
+ retval = stm32l4_unlock_reg(bank);
if (ERROR_OK != retval)
return retval;
- retval = stm32l4_unlock_option_reg(target);
+ retval = stm32l4_unlock_option_reg(bank);
if (ERROR_OK != retval)
return retval;
- /* Write the OBLLAUNCH bit in CR -> Cause device "POR" and option bytes reload */
- retval = target_write_u32(target, stm32l4_get_flash_reg(bank, STM32_FLASH_CR), FLASH_OBLLAUNCH);
+ /* Set OBL_LAUNCH bit in CR -> system reset and option bytes reload,
+ * but the RMs explicitly do *NOT* list this as power-on reset cause, and:
+ * "Note: If the read protection is set while the debugger is still
+ * connected through JTAG/SWD, apply a POR (power-on reset) instead of a system reset."
+ */
+ retval = stm32l4_write_flash_reg(bank, STM32_FLASH_CR, FLASH_OBL_LAUNCH);
+
+ command_print(CMD, "stm32l4x option load completed. Power-on reset might be required");
+
+ /* Need to re-probe after change */
+ struct stm32l4_flash_bank *stm32l4_info = bank->driver_priv;
+ stm32l4_info->probed = false;
- command_print(CMD_CTX, "stm32l4x option load (POR) completed.");
return retval;
}
/* set readout protection level 1 by erasing the RDP option byte */
if (stm32l4_write_option(bank, STM32_FLASH_OPTR, 0, 0x000000FF) != ERROR_OK) {
- command_print(CMD_CTX, "%s failed to lock device", bank->driver->name);
+ command_print(CMD, "%s failed to lock device", bank->driver->name);
return ERROR_OK;
}
}
if (stm32l4_write_option(bank, STM32_FLASH_OPTR, RDP_LEVEL_0, 0x000000FF) != ERROR_OK) {
- command_print(CMD_CTX, "%s failed to unlock device", bank->driver->name);
+ command_print(CMD, "%s failed to unlock device", bank->driver->name);
return ERROR_OK;
}
COMMAND_REGISTRATION_DONE
};
-struct flash_driver stm32l4x_flash = {
+const struct flash_driver stm32l4x_flash = {
.name = "stm32l4x",
.commands = stm32l4_command_handlers,
.flash_bank_command = stm32l4_flash_bank_command,
projects / fw / openocd / blobdiff