SAM3: Add missing architecture names for SAM3S and SAM3N
[fw/openocd] / src / flash / nor / stm32f2x.c
index 367465a056daa7769fbac42cca6a00c70417576d..daa254651e869868c60294be0518204bd5b214b9 100644 (file)
@@ -327,35 +327,44 @@ static int stm32x_write_block(struct flash_bank *bank, uint8_t *buffer,
 
        /* see contrib/loaders/flash/stm32f2x.S for src */
 
-       static const uint16_t stm32x_flash_write_code_16[] = {
-               /* 00000000 <write>: */
-               0x4b07,                         /* ldr          r3, [pc, #28] (20 <STM32_PROG16>) */
-               0x6123,                         /* str          r3, [r4, #16] */
-               0xf830, 0x3b02,         /* ldrh.w       r3, [r0], #2 */
-               0xf821, 0x3b02,         /* strh.w       r3, [r1], #2 */
-
-               /* 0000000c <busy>: */
-               0x68e3,                         /* ldr          r3, [r4, #12] */
-               0xf413, 0x3f80,         /* tst.w        r3, #65536      ; 0x10000 */
-               0xd0fb,                         /* beq.n        c <busy> */
-               0xf013, 0x0ff0,         /* tst.w        r3, #240        ; 0xf0 */
-               0xd101,                         /* bne.n        1e <exit> */
-               0x3a01,                         /* subs         r2, #1 */
-               0xd1f0,                         /* bne.n        0 <write> */
-                                                       /* 0000001e <exit>: */
-               0xbe00,                         /* bkpt         0x0000 */
-
-               /* 00000020 <STM32_PROG16>: */
-               0x0101, 0x0000,         /* .word        0x00000101 */
+       static const uint8_t stm32x_flash_write_code[] = {
+                                                                       /* wait_fifo: */
+               0xD0, 0xF8, 0x00, 0x80,         /* ldr          r8, [r0, #0] */
+               0xB8, 0xF1, 0x00, 0x0F,         /* cmp          r8, #0 */
+               0x1A, 0xD0,                                     /* beq          exit */
+               0x47, 0x68,                                     /* ldr          r7, [r0, #4] */
+               0x47, 0x45,                                     /* cmp          r7, r8 */
+               0xF7, 0xD0,                                     /* beq          wait_fifo */
+
+               0xDF, 0xF8, 0x30, 0x60,         /* ldr          r6, STM32_PROG16 */
+               0x26, 0x61,                                     /* str          r6, [r4, #STM32_FLASH_CR_OFFSET] */
+               0x37, 0xF8, 0x02, 0x6B,         /* ldrh         r6, [r7], #0x02 */
+               0x22, 0xF8, 0x02, 0x6B,         /* strh         r6, [r2], #0x02 */
+                                                                       /* busy: */
+               0xE6, 0x68,                                     /* ldr          r6, [r4, #STM32_FLASH_SR_OFFSET] */
+               0x16, 0xF4, 0x80, 0x3F,         /* tst          r6, #0x10000 */
+               0xFB, 0xD1,                                     /* bne          busy */
+               0x16, 0xF0, 0xF0, 0x0F,         /* tst          r6, #0xf0 */
+               0x07, 0xD1,                                     /* bne          error */
+
+               0x8F, 0x42,                                     /* cmp          r7, r1 */
+               0x28, 0xBF,                                     /* it           cs */
+               0x00, 0xF1, 0x08, 0x07,         /* addcs        r7, r0, #8 */
+               0x47, 0x60,                                     /* str          r7, [r0, #4] */
+               0x01, 0x3B,                                     /* subs         r3, r3, #1 */
+               0x13, 0xB1,                                     /* cbz          r3, exit */
+               0xE1, 0xE7,                                     /* b            wait_fifo */
+                                                                       /* error: */
+               0x00, 0x21,                                     /* movs         r1, #0 */
+               0x41, 0x60,                                     /* str          r1, [r0, #4] */
+                                                                       /* exit: */
+               0x30, 0x46,                                     /* mov          r0, r6 */
+               0x00, 0xBE,                                     /* bkpt         #0x00 */
+
+               /* <STM32_PROG16>: */
+               0x01, 0x01, 0x00, 0x00,         /* .word        0x00000101 */
        };
 
-       /* Flip endian */
-       uint8_t stm32x_flash_write_code[sizeof(stm32x_flash_write_code_16)*2];
-       for (unsigned i = 0; i < sizeof(stm32x_flash_write_code_16) / 2; i++) {
-               stm32x_flash_write_code[i*2 + 0] = stm32x_flash_write_code_16[i] & 0xff;
-               stm32x_flash_write_code[i*2 + 1] = (stm32x_flash_write_code_16[i] >> 8) & 0xff;
-       }
-
        if (target_alloc_working_area(target, sizeof(stm32x_flash_write_code),
                        &stm32x_info->write_algorithm) != ERROR_OK) {
                LOG_WARNING("no working area available, can't do block memory writes");
@@ -385,38 +394,29 @@ static int stm32x_write_block(struct flash_bank *bank, uint8_t *buffer,
        armv7m_info.common_magic = ARMV7M_COMMON_MAGIC;
        armv7m_info.core_mode = ARMV7M_MODE_ANY;
 
-       init_reg_param(&reg_params[0], "r0", 32, PARAM_OUT);
-       init_reg_param(&reg_params[1], "r1", 32, PARAM_OUT);
-       init_reg_param(&reg_params[2], "r2", 32, PARAM_OUT);
-       init_reg_param(&reg_params[3], "r3", 32, PARAM_IN_OUT);
-       init_reg_param(&reg_params[4], "r4", 32, PARAM_OUT);
+       init_reg_param(&reg_params[0], "r0", 32, PARAM_IN_OUT);         /* buffer start, status (out) */
+       init_reg_param(&reg_params[1], "r1", 32, PARAM_OUT);            /* buffer end */
+       init_reg_param(&reg_params[2], "r2", 32, PARAM_OUT);            /* target address */
+       init_reg_param(&reg_params[3], "r3", 32, PARAM_OUT);            /* count (halfword-16bit) */
+       init_reg_param(&reg_params[4], "r4", 32, PARAM_OUT);            /* flash base */
 
-       while (count > 0) {
-               uint32_t thisrun_count = (count > (buffer_size / 2)) ?
-                               (buffer_size / 2) : count;
+       buf_set_u32(reg_params[0].value, 0, 32, source->address);
+       buf_set_u32(reg_params[1].value, 0, 32, source->address + source->size);
+       buf_set_u32(reg_params[2].value, 0, 32, address);
+       buf_set_u32(reg_params[3].value, 0, 32, count);
+       buf_set_u32(reg_params[4].value, 0, 32, STM32_FLASH_BASE);
 
-               retval = target_write_buffer(target, source->address, thisrun_count * 2, buffer);
-               if (retval != ERROR_OK)
-                       break;
+       retval = target_run_flash_async_algorithm(target, buffer, count, 2,
+                       0, NULL,
+                       5, reg_params,
+                       source->address, source->size,
+                       stm32x_info->write_algorithm->address, 0,
+                       &armv7m_info);
 
-               buf_set_u32(reg_params[0].value, 0, 32, source->address);
-               buf_set_u32(reg_params[1].value, 0, 32, address);
-               buf_set_u32(reg_params[2].value, 0, 32, thisrun_count);
-               /* R3 is a return value only */
-               buf_set_u32(reg_params[4].value, 0, 32, STM32_FLASH_BASE);
-
-               retval = target_run_algorithm(target, 0, NULL,
-                               sizeof(reg_params) / sizeof(*reg_params),
-                               reg_params,
-                               stm32x_info->write_algorithm->address,
-                               0,
-                               10000, &armv7m_info);
-               if (retval != ERROR_OK) {
-                       LOG_ERROR("error executing stm32x flash write algorithm");
-                       break;
-               }
+       if (retval == ERROR_FLASH_OPERATION_FAILED) {
+               LOG_ERROR("error executing stm32x flash write algorithm");
 
-               uint32_t error = buf_get_u32(reg_params[3].value, 0, 32) & FLASH_ERROR;
+               uint32_t error = buf_get_u32(reg_params[0].value, 0, 32) & FLASH_ERROR;
 
                if (error & FLASH_WRPERR)
                        LOG_ERROR("flash memory write protected");
@@ -426,12 +426,7 @@ static int stm32x_write_block(struct flash_bank *bank, uint8_t *buffer,
                        /* Clear but report errors */
                        target_write_u32(target, STM32_FLASH_SR, error);
                        retval = ERROR_FAIL;
-                       break;
                }
-
-               buffer += thisrun_count * 2;
-               address += thisrun_count * 2;
-               count -= thisrun_count;
        }
 
        target_free_working_area(target, source);