--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+
+/***************************************************************************
+ * Copyright (C) 2022 by Toms Stūrmanis *
+ * toms.sturmanis@gmail.com *
+ ***************************************************************************/
+
+#ifdef HAVE_CONFIG_H
+#include "config.h"
+#endif
+
+#include <stdint.h>
+
+#include <helper/binarybuffer.h>
+#include <helper/bits.h>
+
+#include <target/algorithm.h>
+#include <target/arm_adi_v5.h>
+#include <target/armv7m.h>
+#include <target/cortex_m.h>
+
+#include "imp.h"
+
+#define RSL10_FLASH_ADDRESS_MAIN 0x00100000
+#define RSL10_FLASH_ADDRESS_NVR1 0x00080000
+#define RSL10_FLASH_ADDRESS_NVR2 0x00080800
+#define RSL10_FLASH_ADDRESS_NVR3 0x00081000
+#define RSL10_FLASH_ADDRESS_NVR4 0x00081800
+#define RSL10_FLASH_ADDRESS_LOCK_INFO_SETTING 0x00081040
+
+#define RSL10_REG_ID 0x1FFFFFFC
+
+#define RSL10_FLASH_REG_MAIN_WRITE_UNLOCK 0x40000504
+#define RSL10_FLASH_REG_MAIN_CTRL 0x40000508
+#define RSL10_FLASH_REG_IF_STATUS 0x40000538
+#define RSL10_FLASH_REG_NVR_WRITE_UNLOCK 0x40000548
+#define RSL10_FLASH_REG_NVR_CTRL 0x4000054C
+
+#define RSL10_FLASH_REG_DEBUG_UNLOCK_KEY1 0x400000F0
+#define RSL10_FLASH_REG_DEBUG_UNLOCK_KEY2 0x400000F4
+#define RSL10_FLASH_REG_DEBUG_UNLOCK_KEY3 0x400000F8
+#define RSL10_FLASH_REG_DEBUG_UNLOCK_KEY4 0x400000FC
+
+#define RSL10_NVR3_USER_KEY_OFFSET 0x40
+
+#define RSL10_ID 0x09010106
+#define RSL10_FLASH_KEY_MAIN 0xDBC8264E
+#define RSL10_FLASH_KEY_NVR 0x71B371F5
+#define RSL10_KEY_DEBUG_LOCK 0x4C6F634B
+
+#define RSL10_FLASH_REG_MAIN_CTRL_LOW_W_ENABLE BIT(0)
+#define RSL10_FLASH_REG_MAIN_CTRL_MIDDLE_W_ENABLE BIT(1)
+#define RSL10_FLASH_REG_MAIN_CTRL_HIGH_W_ENABLE BIT(2)
+
+#define RSL10_FLASH_REG_NVR_CTRL_NVR1_W_ENABLE BIT(1)
+#define RSL10_FLASH_REG_NVR_CTRL_NVR2_W_ENABLE BIT(2)
+#define RSL10_FLASH_REG_NVR_CTRL_NVR3_W_ENABLE BIT(3)
+
+#define RSL10_FLASH_REG_STATUS_LOW_W_UNLOCKED BIT(0)
+#define RSL10_FLASH_REG_STATUS_MIDDLE_W_UNLOCKED BIT(1)
+#define RSL10_FLASH_REG_STATUS_HIGH_W_UNLOCKED BIT(2)
+#define RSL10_FLASH_REG_STATUS_NVR1_W_UNLOCKED BIT(4)
+#define RSL10_FLASH_REG_STATUS_NVR2_W_UNLOCKED BIT(5)
+#define RSL10_FLASH_REG_STATUS_NVR3_W_UNLOCKED BIT(6)
+
+#define RSL10_ROM_CMD_WRITE_WORD_PAIR 0x3C
+#define RSL10_ROM_CMD_WRITE_BUFFER 0x40
+#define RSL10_ROM_CMD_ERASE_SECTOR 0x44
+#define RSL10_ROM_CMD_ERASE_ALL 0x48
+
+#define FLASH_SECTOR_SIZE 0x2000
+
+#define RSL10_ROM_CMD_WRITE_BUFFER_MAX_SIZE FLASH_SECTOR_SIZE
+
+#define ALGO_STACK_POINTER_ADDR 0x20002000
+
+/* Used to launch flash related functions from ROM
+ * Params :
+ * r0-r2 = arguments
+ * r3 = target address in rom
+ */
+static const uint8_t rsl10_rom_launcher_code[] = {
+#include "../../../contrib/loaders/flash/rsl10/rom_launcher.inc"
+};
+
+enum rsl10_flash_status {
+ RSL10_FLASH_ERR_NONE = 0x0,
+ RSL10_FLASH_ERR_GENERAL_FAILURE = 0x1,
+ RSL10_FLASH_ERR_WRITE_NOT_ENABLED = 0x2,
+ RSL10_FLASH_ERR_BAD_ADDRESS = 0x3,
+ RSL10_FLASH_ERR_ERASE_FAILED = 0x4,
+ RSL10_FLASH_ERR_BAD_LENGTH = 0x5,
+ RSL10_FLASH_ERR_INACCESSIBLE = 0x6,
+ RSL10_FLASH_ERR_COPIER_BUSY = 0x7,
+ RSL10_FLASH_ERR_PROG_FAILED = 0x8,
+ RSL10_FLASH_MAX_ERR_CODES /* must be the last one */
+};
+
+static const char *const rsl10_error_list[] = {
+ [RSL10_FLASH_ERR_GENERAL_FAILURE] = "general failure",
+ [RSL10_FLASH_ERR_WRITE_NOT_ENABLED] = "write not enabled, protected",
+ [RSL10_FLASH_ERR_BAD_ADDRESS] = "bad address",
+ [RSL10_FLASH_ERR_ERASE_FAILED] = "erase failed",
+ [RSL10_FLASH_ERR_BAD_LENGTH] = "bad length",
+ [RSL10_FLASH_ERR_INACCESSIBLE] = "inaccessible: not powered up, or isolated",
+ [RSL10_FLASH_ERR_COPIER_BUSY] = "copier busy",
+ [RSL10_FLASH_ERR_PROG_FAILED] = "prog failed",
+};
+
+const char *rsl10_error(enum rsl10_flash_status x)
+{
+ if (x >= RSL10_FLASH_MAX_ERR_CODES || !rsl10_error_list[x])
+ return "unknown";
+ return rsl10_error_list[x];
+}
+
+const struct flash_driver rsl10_flash;
+
+struct rsl10_info {
+ unsigned int refcount;
+
+ struct rsl10_bank {
+ struct rsl10_info *chip;
+ bool probed;
+ } bank[5];
+ struct target *target;
+
+ unsigned int flash_size_kb;
+};
+
+static bool rsl10_bank_is_probed(const struct flash_bank *bank)
+{
+ struct rsl10_bank *nbank = bank->driver_priv;
+ assert(nbank);
+ return nbank->probed;
+}
+
+static int rsl10_probe(struct flash_bank *bank);
+
+static int rsl10_get_probed_chip_if_halted(struct flash_bank *bank, struct rsl10_info **chip)
+{
+ if (bank->target->state != TARGET_HALTED) {
+ LOG_ERROR("Target not halted");
+ return ERROR_TARGET_NOT_HALTED;
+ }
+
+ struct rsl10_bank *nbank = bank->driver_priv;
+ *chip = nbank->chip;
+
+ if (rsl10_bank_is_probed(bank))
+ return ERROR_OK;
+
+ return rsl10_probe(bank);
+}
+
+static int rsl10_protect_check(struct flash_bank *bank)
+{
+ struct rsl10_bank *nbank = bank->driver_priv;
+ struct rsl10_info *chip = nbank->chip;
+
+ assert(chip);
+
+ uint32_t status;
+
+ int retval = target_read_u32(bank->target, RSL10_FLASH_REG_IF_STATUS, &status);
+ if (retval != ERROR_OK)
+ return retval;
+
+ if (bank->base == RSL10_FLASH_ADDRESS_MAIN) {
+ for (unsigned int i = 0; i < bank->num_prot_blocks; i++)
+ bank->prot_blocks[i].is_protected = (status & (1 << i)) ? 0 : 1;
+
+ } else {
+ uint32_t test_bit = 0;
+ switch (bank->base) {
+ case RSL10_FLASH_ADDRESS_NVR1:
+ test_bit = RSL10_FLASH_REG_STATUS_NVR1_W_UNLOCKED;
+ break;
+ case RSL10_FLASH_ADDRESS_NVR2:
+ test_bit = RSL10_FLASH_REG_STATUS_NVR2_W_UNLOCKED;
+ break;
+ case RSL10_FLASH_ADDRESS_NVR3:
+ test_bit = RSL10_FLASH_REG_STATUS_NVR3_W_UNLOCKED;
+ break;
+ default:
+ break;
+ }
+
+ bank->sectors[0].is_protected = (status & test_bit) ? 0 : 1;
+ }
+ return ERROR_OK;
+}
+
+static int rsl10_protect(struct flash_bank *bank, int set, unsigned int first, unsigned int last)
+{
+
+ struct rsl10_info *chip;
+ int retval = rsl10_get_probed_chip_if_halted(bank, &chip);
+ if (retval != ERROR_OK)
+ return retval;
+
+ if (bank->base == RSL10_FLASH_ADDRESS_MAIN) {
+ uint32_t status;
+ retval = target_read_u32(bank->target, RSL10_FLASH_REG_MAIN_CTRL, &status);
+ if (retval != ERROR_OK)
+ return retval;
+
+ for (unsigned int i = first; i <= last; i++) {
+ if (set)
+ status &= ~(1 << i);
+ else
+ status |= (1 << i);
+ }
+
+ retval = target_write_u32(bank->target, RSL10_FLASH_REG_MAIN_CTRL, status);
+ if (retval != ERROR_OK)
+ return retval;
+
+ retval = target_write_u32(bank->target, RSL10_FLASH_REG_MAIN_WRITE_UNLOCK, RSL10_FLASH_KEY_MAIN);
+ if (retval != ERROR_OK)
+ return retval;
+ } else {
+ uint32_t bit = 0;
+ switch (bank->base) {
+ case RSL10_FLASH_ADDRESS_NVR1:
+ bit = RSL10_FLASH_REG_NVR_CTRL_NVR1_W_ENABLE;
+ break;
+ case RSL10_FLASH_ADDRESS_NVR2:
+ bit = RSL10_FLASH_REG_NVR_CTRL_NVR2_W_ENABLE;
+ break;
+ case RSL10_FLASH_ADDRESS_NVR3:
+ bit = RSL10_FLASH_REG_NVR_CTRL_NVR3_W_ENABLE;
+ break;
+ default:
+ break;
+ }
+
+ uint32_t status;
+ retval = target_read_u32(bank->target, RSL10_FLASH_REG_NVR_CTRL, &status);
+ if (retval != ERROR_OK)
+ return retval;
+
+ if (set)
+ status &= ~bit;
+ else
+ status |= bit;
+
+ retval = target_write_u32(bank->target, RSL10_FLASH_REG_NVR_CTRL, status);
+ if (retval != ERROR_OK)
+ return retval;
+
+ retval = target_write_u32(bank->target, RSL10_FLASH_REG_NVR_WRITE_UNLOCK, RSL10_FLASH_KEY_NVR);
+ if (retval != ERROR_OK)
+ return retval;
+ }
+
+ return ERROR_OK;
+}
+
+static int rsl10_check_device(struct flash_bank *bank)
+{
+ uint32_t configid;
+ int retval = target_read_u32(bank->target, RSL10_REG_ID, &configid);
+ if (retval != ERROR_OK)
+ return retval;
+
+ if (configid != RSL10_ID) {
+ LOG_ERROR("This is not supported (RSL10) device, use other flash driver!!!");
+ return ERROR_TARGET_INVALID;
+ }
+ return ERROR_OK;
+}
+
+static int rsl10_probe(struct flash_bank *bank)
+{
+ struct rsl10_bank *nbank = bank->driver_priv;
+ struct rsl10_info *chip = nbank->chip;
+
+ int retval = rsl10_check_device(bank);
+ if (retval != ERROR_OK)
+ return retval;
+
+ unsigned int bank_id;
+ unsigned int num_prot_blocks = 0;
+ switch (bank->base) {
+ case RSL10_FLASH_ADDRESS_MAIN:
+ bank_id = 0;
+ num_prot_blocks = 3;
+ break;
+ case RSL10_FLASH_ADDRESS_NVR1:
+ bank_id = 1;
+ break;
+ case RSL10_FLASH_ADDRESS_NVR2:
+ bank_id = 2;
+ break;
+ case RSL10_FLASH_ADDRESS_NVR3:
+ bank_id = 3;
+ break;
+ default:
+ return ERROR_FAIL;
+ }
+
+ uint32_t flash_page_size = 2048;
+
+ bank->write_start_alignment = 8;
+ bank->write_end_alignment = 8;
+
+ bank->num_sectors = bank->size / flash_page_size;
+ chip->flash_size_kb = bank->size / 1024;
+
+ free(bank->sectors);
+ bank->sectors = NULL;
+
+ bank->sectors = alloc_block_array(0, flash_page_size, bank->num_sectors);
+ if (!bank->sectors)
+ return ERROR_FAIL;
+
+ free(bank->prot_blocks);
+ bank->prot_blocks = NULL;
+
+ if (num_prot_blocks > 0) {
+ bank->num_prot_blocks = num_prot_blocks;
+ bank->prot_blocks = alloc_block_array(0, bank->num_sectors / 3 * flash_page_size, bank->num_prot_blocks);
+ if (!bank->prot_blocks)
+ return ERROR_FAIL;
+ }
+
+ chip->bank[bank_id].probed = true;
+ return ERROR_OK;
+}
+
+static int rsl10_auto_probe(struct flash_bank *bank)
+{
+ if (rsl10_bank_is_probed(bank))
+ return ERROR_OK;
+
+ return rsl10_probe(bank);
+}
+
+static int rsl10_ll_flash_erase(struct rsl10_info *chip, uint32_t address)
+{
+ struct target *target = chip->target;
+ struct working_area *write_algorithm;
+
+ LOG_DEBUG("erasing buffer flash address=0x%" PRIx32, address);
+
+ int retval = target_alloc_working_area(target, sizeof(rsl10_rom_launcher_code), &write_algorithm);
+ if (retval != ERROR_OK) {
+ LOG_ERROR("Current working area 0x%x is too small! Increase working area size!", target->working_area_size);
+ return ERROR_FAIL;
+ }
+
+ retval =
+ target_write_buffer(target, write_algorithm->address, sizeof(rsl10_rom_launcher_code), rsl10_rom_launcher_code);
+ if (retval != ERROR_OK)
+ goto free_algorithm;
+
+ struct reg_param reg_params[3];
+ struct armv7m_algorithm armv7m_info;
+ armv7m_info.common_magic = ARMV7M_COMMON_MAGIC;
+ armv7m_info.core_mode = ARM_MODE_THREAD;
+
+ init_reg_param(®_params[0], "r0", 32, PARAM_IN_OUT); /* address */
+ init_reg_param(®_params[1], "r3", 32, PARAM_OUT); /* cmd */
+ init_reg_param(®_params[2], "sp", 32, PARAM_OUT); /* stack pointer */
+
+ buf_set_u32(reg_params[0].value, 0, 32, address);
+ uint32_t cmd;
+ retval = target_read_u32(target, RSL10_ROM_CMD_ERASE_SECTOR, &cmd);
+ if (retval != ERROR_OK)
+ goto free_reg_params;
+ buf_set_u32(reg_params[1].value, 0, 32, cmd);
+ buf_set_u32(reg_params[2].value, 0, 32, ALGO_STACK_POINTER_ADDR);
+
+ retval = target_run_algorithm(
+ target, 0, NULL, ARRAY_SIZE(reg_params), reg_params, write_algorithm->address,
+ write_algorithm->address + sizeof(rsl10_rom_launcher_code) - 2, 1000, &armv7m_info
+ );
+ if (retval != ERROR_OK)
+ goto free_reg_params;
+
+ int algo_ret = buf_get_u32(reg_params[0].value, 0, 32);
+ if (algo_ret != RSL10_FLASH_ERR_NONE) {
+ LOG_ERROR("RSL10 ERASE ERROR: '%s' (%d)", rsl10_error(algo_ret), algo_ret);
+ retval = ERROR_FLASH_SECTOR_NOT_ERASED;
+ }
+
+free_reg_params:
+ for (unsigned int i = 0; i < ARRAY_SIZE(reg_params); i++)
+ destroy_reg_param(®_params[i]);
+
+free_algorithm:
+ target_free_working_area(target, write_algorithm);
+ return retval;
+}
+
+static int rsl10_ll_flash_write(struct rsl10_info *chip, uint32_t address, const uint8_t *buffer, uint32_t bytes)
+{
+ struct target *target = chip->target;
+ struct working_area *write_algorithm;
+
+ if (bytes == 8) {
+ uint32_t data;
+ data = buf_get_u32(buffer, 0, 32);
+ LOG_DEBUG("Writing 0x%" PRIx32 " to flash address=0x%" PRIx32 " bytes=0x%" PRIx32, data, address, bytes);
+ } else
+ LOG_DEBUG("Writing buffer to flash address=0x%" PRIx32 " bytes=0x%" PRIx32, address, bytes);
+
+ /* allocate working area with flash programming code */
+ int retval = target_alloc_working_area(target, sizeof(rsl10_rom_launcher_code), &write_algorithm);
+ if (retval != ERROR_OK) {
+ LOG_ERROR("Current working area 0x%x is too small! Increase working area size!", target->working_area_size);
+ return ERROR_FAIL;
+ }
+
+ retval =
+ target_write_buffer(target, write_algorithm->address, sizeof(rsl10_rom_launcher_code), rsl10_rom_launcher_code);
+ if (retval != ERROR_OK)
+ goto free_algorithm;
+
+ /* memory buffer, rounded down, to be multiple of 8 */
+ uint32_t buffer_avail = target_get_working_area_avail(target) & ~7;
+ uint32_t buffer_size = MIN(RSL10_ROM_CMD_WRITE_BUFFER_MAX_SIZE, buffer_avail);
+ struct working_area *source;
+ retval = target_alloc_working_area(target, buffer_size, &source);
+ if (retval != ERROR_OK) {
+ LOG_ERROR("Current working area 0x%x is too small! Increase working area size!", target->working_area_size);
+ goto free_algorithm;
+ }
+
+ struct reg_param reg_params[5];
+ struct armv7m_algorithm armv7m_info;
+ armv7m_info.common_magic = ARMV7M_COMMON_MAGIC;
+ armv7m_info.core_mode = ARM_MODE_THREAD;
+
+ init_reg_param(®_params[0], "r0", 32, PARAM_IN_OUT); /* start addr, return value */
+ init_reg_param(®_params[1], "r1", 32, PARAM_OUT); /* length */
+ init_reg_param(®_params[2], "r2", 32, PARAM_OUT); /* data */
+ init_reg_param(®_params[3], "r3", 32, PARAM_OUT); /* cmd */
+ init_reg_param(®_params[4], "sp", 32, PARAM_OUT); /* stack pointer */
+ buf_set_u32(reg_params[4].value, 0, 32, ALGO_STACK_POINTER_ADDR);
+
+ uint32_t cmd = 0;
+ uint32_t sent_bytes = 0;
+ uint32_t write_address = 0;
+ uint32_t bytes_to_send = 0;
+ uint32_t remaining_bytes = 0;
+
+ retval = target_read_u32(target, RSL10_ROM_CMD_WRITE_BUFFER, &cmd);
+ if (retval != ERROR_OK)
+ goto free_everything;
+
+ while (sent_bytes < bytes) {
+ remaining_bytes = bytes - sent_bytes;
+ bytes_to_send = remaining_bytes >= buffer_size ? buffer_size : remaining_bytes;
+
+ retval = target_write_buffer(target, source->address, bytes_to_send, buffer + sent_bytes);
+ if (retval != ERROR_OK)
+ goto free_everything;
+
+ write_address = address + sent_bytes;
+
+ LOG_DEBUG(
+ "write_address: 0x%" PRIx32 ", words: 0x%" PRIx32 ", source: 0x%" PRIx64 ", cmd: 0x%" PRIx32, write_address,
+ bytes_to_send / 4, source->address, cmd
+ );
+ buf_set_u32(reg_params[0].value, 0, 32, write_address);
+ buf_set_u32(reg_params[1].value, 0, 32, bytes_to_send / 4);
+ buf_set_u32(reg_params[2].value, 0, 32, source->address);
+ buf_set_u32(reg_params[3].value, 0, 32, cmd);
+
+ retval = target_run_algorithm(
+ target, 0, NULL, ARRAY_SIZE(reg_params), reg_params, write_algorithm->address,
+ write_algorithm->address + sizeof(rsl10_rom_launcher_code) - 2, 1000, &armv7m_info
+ );
+ if (retval != ERROR_OK)
+ goto free_everything;
+
+ int algo_ret = buf_get_u32(reg_params[0].value, 0, 32);
+ if (algo_ret != RSL10_FLASH_ERR_NONE) {
+ LOG_ERROR("RSL10 WRITE ERROR: '%s' (%d)", rsl10_error(algo_ret), algo_ret);
+ retval = ERROR_FLASH_OPERATION_FAILED;
+ goto free_everything;
+ }
+
+ sent_bytes += bytes_to_send;
+ }
+
+free_everything:
+ target_free_working_area(target, source);
+
+ for (unsigned int i = 0; i < ARRAY_SIZE(reg_params); i++)
+ destroy_reg_param(®_params[i]);
+
+free_algorithm:
+ target_free_working_area(target, write_algorithm);
+
+ return retval;
+}
+
+static int rsl10_mass_erase(struct target *target)
+{
+ struct working_area *write_algorithm;
+
+ int retval = target_alloc_working_area(target, sizeof(rsl10_rom_launcher_code), &write_algorithm);
+ if (retval != ERROR_OK) {
+ LOG_ERROR("Current working area 0x%x is too small! Increase working area size!", target->working_area_size);
+ return ERROR_FAIL;
+ }
+
+ retval =
+ target_write_buffer(target, write_algorithm->address, sizeof(rsl10_rom_launcher_code), rsl10_rom_launcher_code);
+ if (retval != ERROR_OK)
+ goto free_algorithm;
+
+ struct reg_param reg_params[3];
+ struct armv7m_algorithm armv7m_info;
+ armv7m_info.common_magic = ARMV7M_COMMON_MAGIC;
+ armv7m_info.core_mode = ARM_MODE_THREAD;
+
+ init_reg_param(®_params[0], "r0", 32, PARAM_IN_OUT); /* return value */
+ init_reg_param(®_params[1], "r3", 32, PARAM_OUT); /* cmd */
+ init_reg_param(®_params[2], "sp", 32, PARAM_OUT); /* stack pointer */
+
+ uint32_t cmd;
+ retval = target_read_u32(target, RSL10_ROM_CMD_ERASE_ALL, &cmd);
+ if (retval != ERROR_OK)
+ goto free_reg_params;
+ buf_set_u32(reg_params[1].value, 0, 32, cmd);
+ buf_set_u32(reg_params[2].value, 0, 32, ALGO_STACK_POINTER_ADDR);
+
+ retval = target_run_algorithm(
+ target, 0, NULL, ARRAY_SIZE(reg_params), reg_params, write_algorithm->address,
+ write_algorithm->address + sizeof(rsl10_rom_launcher_code) - 2, 1000, &armv7m_info
+ );
+ if (retval != ERROR_OK)
+ goto free_reg_params;
+
+ int algo_ret = buf_get_u32(reg_params[0].value, 0, 32);
+ if (algo_ret != RSL10_FLASH_ERR_NONE) {
+ LOG_ERROR("RSL10 MASS ERASE ERROR: '%s' (%d)", rsl10_error(algo_ret), algo_ret);
+ retval = ERROR_FLASH_OPERATION_FAILED;
+ }
+
+free_reg_params:
+ for (unsigned int i = 0; i < ARRAY_SIZE(reg_params); i++)
+ destroy_reg_param(®_params[i]);
+
+free_algorithm:
+ target_free_working_area(target, write_algorithm);
+ return retval;
+}
+
+static int rsl10_write(struct flash_bank *bank, const uint8_t *buffer, uint32_t offset, uint32_t count)
+{
+ struct rsl10_info *chip;
+
+ int retval = rsl10_get_probed_chip_if_halted(bank, &chip);
+ if (retval != ERROR_OK)
+ return retval;
+
+ return rsl10_ll_flash_write(chip, bank->base + offset, buffer, count);
+}
+
+static int rsl10_erase(struct flash_bank *bank, unsigned int first, unsigned int last)
+{
+ LOG_INFO("erase bank: %x, %x", first, last);
+ int retval;
+ struct rsl10_info *chip;
+
+ retval = rsl10_get_probed_chip_if_halted(bank, &chip);
+ if (retval != ERROR_OK)
+ return retval;
+
+ for (unsigned int i = first; i <= last; i++) {
+ retval = rsl10_ll_flash_erase(chip, bank->base + i * 0x800);
+ if (retval != ERROR_OK)
+ return retval;
+ }
+
+ return ERROR_OK;
+}
+
+static void rsl10_free_driver_priv(struct flash_bank *bank)
+{
+ struct rsl10_bank *nbank = bank->driver_priv;
+ struct rsl10_info *chip = nbank->chip;
+ if (!chip)
+ return;
+
+ chip->refcount--;
+ if (chip->refcount == 0) {
+ free(chip);
+ bank->driver_priv = NULL;
+ }
+}
+
+static struct rsl10_info *rsl10_get_chip(struct target *target)
+{
+ struct flash_bank *bank_iter;
+
+ /* iterate over rsl10 banks of same target */
+ for (bank_iter = flash_bank_list(); bank_iter; bank_iter = bank_iter->next) {
+ if (bank_iter->driver != &rsl10_flash)
+ continue;
+
+ if (bank_iter->target != target)
+ continue;
+
+ struct rsl10_bank *nbank = bank_iter->driver_priv;
+ if (!nbank)
+ continue;
+
+ if (nbank->chip)
+ return nbank->chip;
+ }
+ return NULL;
+}
+
+FLASH_BANK_COMMAND_HANDLER(rsl10_flash_bank_command)
+{
+ struct rsl10_info *chip = NULL;
+ struct rsl10_bank *nbank = NULL;
+ LOG_INFO("Creating flash @ " TARGET_ADDR_FMT, bank->base);
+
+ switch (bank->base) {
+ case RSL10_FLASH_ADDRESS_MAIN:
+ case RSL10_FLASH_ADDRESS_NVR1:
+ case RSL10_FLASH_ADDRESS_NVR2:
+ case RSL10_FLASH_ADDRESS_NVR3:
+ case RSL10_FLASH_ADDRESS_NVR4:
+ break;
+ default:
+ LOG_ERROR("Invalid bank address " TARGET_ADDR_FMT, bank->base);
+ return ERROR_FAIL;
+ }
+
+ chip = rsl10_get_chip(bank->target);
+ if (!chip) {
+ chip = calloc(1, sizeof(*chip));
+ if (!chip)
+ return ERROR_FAIL;
+
+ chip->target = bank->target;
+ }
+
+ switch (bank->base) {
+ case RSL10_FLASH_ADDRESS_MAIN:
+ nbank = &chip->bank[0];
+ break;
+ case RSL10_FLASH_ADDRESS_NVR1:
+ nbank = &chip->bank[1];
+ break;
+ case RSL10_FLASH_ADDRESS_NVR2:
+ nbank = &chip->bank[2];
+ break;
+ case RSL10_FLASH_ADDRESS_NVR3:
+ nbank = &chip->bank[3];
+ break;
+ case RSL10_FLASH_ADDRESS_NVR4:
+ nbank = &chip->bank[4];
+ break;
+ }
+ assert(nbank);
+
+ chip->refcount++;
+ nbank->chip = chip;
+ nbank->probed = false;
+ bank->driver_priv = nbank;
+
+ return ERROR_OK;
+}
+
+COMMAND_HANDLER(rsl10_lock_command)
+{
+ struct target *target = get_current_target(CMD_CTX);
+
+ if (CMD_ARGC != 4)
+ return ERROR_COMMAND_SYNTAX_ERROR;
+
+ struct flash_bank *bank;
+ int retval = get_flash_bank_by_addr(target, RSL10_FLASH_ADDRESS_NVR3, true, &bank);
+ if (retval != ERROR_OK)
+ return retval;
+
+ LOG_INFO("Keys used: %s %s %s %s", CMD_ARGV[0], CMD_ARGV[1], CMD_ARGV[2], CMD_ARGV[3]);
+
+ uint32_t user_key[4];
+ COMMAND_PARSE_NUMBER(u32, CMD_ARGV[0], user_key[0]);
+ COMMAND_PARSE_NUMBER(u32, CMD_ARGV[1], user_key[1]);
+ COMMAND_PARSE_NUMBER(u32, CMD_ARGV[2], user_key[2]);
+ COMMAND_PARSE_NUMBER(u32, CMD_ARGV[3], user_key[3]);
+
+ uint8_t write_buffer[6 * 4];
+ target_buffer_set_u32(target, write_buffer, RSL10_KEY_DEBUG_LOCK);
+ target_buffer_set_u32_array(target, &write_buffer[4], 4, user_key);
+ /* pad the end to 64-bit word boundary */
+ memset(&write_buffer[5 * 4], bank->default_padded_value, 4);
+
+ retval = rsl10_erase(bank, 0, 0);
+ if (retval != ERROR_OK)
+ return retval;
+
+ retval = rsl10_write(bank, write_buffer, RSL10_NVR3_USER_KEY_OFFSET, sizeof(write_buffer));
+ if (retval != ERROR_OK) {
+ /* erase sector, if write fails, otherwise it can lock debug with wrong keys */
+ return rsl10_erase(bank, 0, 0);
+ }
+
+ command_print(
+ CMD, "****** WARNING ******\n"
+ "rsl10 device has been successfully prepared to lock.\n"
+ "Debug port is locked after restart.\n"
+ "Unlock with 'rsl10_unlock key0 key1 key2 key3'\n"
+ "****** ....... ******\n"
+ );
+
+ return rsl10_protect(bank, true, 0, 0);
+}
+
+COMMAND_HANDLER(rsl10_unlock_command)
+{
+ if (CMD_ARGC != 4)
+ return ERROR_COMMAND_SYNTAX_ERROR;
+
+ struct target *target = get_current_target(CMD_CTX);
+ struct cortex_m_common *cortex_m = target_to_cm(target);
+
+ struct adiv5_dap *dap = cortex_m->armv7m.arm.dap;
+ struct adiv5_ap *ap = dap_get_ap(dap, 0);
+
+ uint32_t user_key[4];
+ COMMAND_PARSE_NUMBER(u32, CMD_ARGV[0], user_key[0]);
+ COMMAND_PARSE_NUMBER(u32, CMD_ARGV[1], user_key[1]);
+ COMMAND_PARSE_NUMBER(u32, CMD_ARGV[2], user_key[2]);
+ COMMAND_PARSE_NUMBER(u32, CMD_ARGV[3], user_key[3]);
+
+ uint8_t write_buffer1[4 * 4];
+ target_buffer_set_u32_array(target, write_buffer1, 4, user_key);
+ int retval = mem_ap_write_buf(ap, write_buffer1, 4, 4, RSL10_FLASH_REG_DEBUG_UNLOCK_KEY1);
+ if (retval != ERROR_OK) {
+ dap_put_ap(ap);
+ return retval;
+ }
+
+ dap_put_ap(ap);
+
+ uint32_t key;
+ retval = mem_ap_read_atomic_u32(ap, RSL10_FLASH_ADDRESS_LOCK_INFO_SETTING, &key);
+ LOG_INFO("mem read: 0x%08" PRIx32, key);
+
+ if (key == RSL10_KEY_DEBUG_LOCK) {
+ retval = command_run_line(CMD_CTX, "reset init");
+ if (retval != ERROR_OK)
+ return retval;
+
+ struct flash_bank *bank;
+ retval = get_flash_bank_by_addr(target, RSL10_FLASH_ADDRESS_NVR3, true, &bank);
+ if (retval != ERROR_OK)
+ return retval;
+
+ retval = rsl10_protect(bank, false, 0, 0);
+ if (retval != ERROR_OK)
+ return retval;
+
+ uint8_t write_buffer2[4 * 2];
+ target_buffer_set_u32(target, write_buffer2, 0x1);
+ /* pad the end to 64-bit word boundary */
+ memset(&write_buffer2[4], bank->default_padded_value, 4);
+
+ /* let it fail, because sector is not erased, maybe just erase all? */
+ (void)rsl10_write(bank, write_buffer2, RSL10_NVR3_USER_KEY_OFFSET, sizeof(write_buffer2));
+ command_print(CMD, "Debug port is unlocked!");
+ }
+
+ return ERROR_OK;
+}
+
+COMMAND_HANDLER(rsl10_mass_erase_command)
+{
+ if (CMD_ARGC)
+ return ERROR_COMMAND_SYNTAX_ERROR;
+
+ struct target *target = get_current_target(CMD_CTX);
+
+ int retval = rsl10_mass_erase(target);
+ if (retval != ERROR_OK)
+ return retval;
+
+ command_print(CMD, "Mass erase was succesfull!");
+ return ERROR_OK;
+}
+
+static const struct command_registration rsl10_exec_command_handlers[] = {
+ {
+ .name = "lock",
+ .handler = rsl10_lock_command,
+ .mode = COMMAND_EXEC,
+ .help = "Lock rsl10 debug, with passed keys",
+ .usage = "key1 key2 key3 key4",
+ },
+ {
+ .name = "unlock",
+ .handler = rsl10_unlock_command,
+ .mode = COMMAND_EXEC,
+ .help = "Unlock rsl10 debug, with passed keys",
+ .usage = "key1 key2 key3 key4",
+ },
+ {
+ .name = "mass_erase",
+ .handler = rsl10_mass_erase_command,
+ .mode = COMMAND_EXEC,
+ .help = "Mass erase all unprotected flash areas",
+ .usage = "",
+ },
+ COMMAND_REGISTRATION_DONE};
+
+static const struct command_registration rsl10_command_handlers[] = {
+ {
+ .name = "rsl10",
+ .mode = COMMAND_ANY,
+ .help = "rsl10 flash command group",
+ .usage = "",
+ .chain = rsl10_exec_command_handlers,
+ },
+ COMMAND_REGISTRATION_DONE};
+
+const struct flash_driver rsl10_flash = {
+ .name = "rsl10",
+ .commands = rsl10_command_handlers,
+ .flash_bank_command = rsl10_flash_bank_command,
+ .erase = rsl10_erase,
+ .protect = rsl10_protect,
+ .write = rsl10_write,
+ .read = default_flash_read,
+ .probe = rsl10_probe,
+ .auto_probe = rsl10_auto_probe,
+ .erase_check = default_flash_blank_check,
+ .protect_check = rsl10_protect_check,
+ .free_driver_priv = rsl10_free_driver_priv,
+};
projects / fw / openocd / blobdiff