Clean up many C99 integer types format specifiers

[fw/openocd] / src / flash / nor / lpcspifi.c

diff --git a/src/flash/nor/lpcspifi.c b/src/flash/nor/lpcspifi.c
index dfd8645e7d9083ef8bf7eeb2b164d77632551ff3..dc964b90a43a82f29503598b884924e5918fb83d 100644 (file)
--- a/src/flash/nor/lpcspifi.c
+++ b/src/flash/nor/lpcspifi.c
@@ -199,7 +199,7 @@ static int lpcspifi_set_hw_mode(struct flash_bank *bank)
                return retval;
        }
 
-       LOG_DEBUG("Writing algorithm to working area at 0x%08x",
+       LOG_DEBUG("Writing algorithm to working area at 0x%08" PRIx32,
                spifi_init_algorithm->address);
        /* Write algorithm to working area */
        retval = target_write_buffer(target,
@@ -715,7 +715,7 @@ static int lpcspifi_write(struct flash_bank *bank, uint8_t *buffer,
                LOG_WARNING("Working area size is limited; flash writes may be"\
                        " slow. Increase working area size to at least %zdB"\
                        " to reduce write times.",
-                       sizeof(lpcspifi_flash_write_code) + page_size
+                       (size_t)(sizeof(lpcspifi_flash_write_code) + page_size)
                );
        else if (fifo_size > 0x2000) /* Beyond this point, we start to get diminishing returns */
                fifo_size = 0x2000;
@@ -913,7 +913,7 @@ static int lpcspifi_probe(struct flash_bank *bank)
                sectors[sector].offset = sector * lpcspifi_info->dev->sectorsize;
                sectors[sector].size = lpcspifi_info->dev->sectorsize;
                sectors[sector].is_erased = -1;
-               sectors[sector].is_protected = 1;
+               sectors[sector].is_protected = 0;
        }
 
        bank->sectors = sectors;
@@ -947,7 +947,7 @@ static int get_lpcspifi_info(struct flash_bank *bank, char *buf, int buf_size)
        }
 
        snprintf(buf, buf_size, "\nSPIFI flash information:\n"
-               "  Device \'%s\' (ID 0x%08x)\n",
+               "  Device \'%s\' (ID 0x%08" PRIx32 ")\n",
                lpcspifi_info->dev->name, lpcspifi_info->dev->device_id);
 
        return ERROR_OK;