flash/nor: use target_addr_t for flash bank base

[fw/openocd] / src / flash / nor / lpc2000.c

diff --git a/src/flash/nor/lpc2000.c b/src/flash/nor/lpc2000.c
index e62fc7948eb11e2580be8bf4db8ef36c5ca3361a..58afd79ac650a31f97c2669f29ea76902f475396 100644 (file)
--- a/src/flash/nor/lpc2000.c
+++ b/src/flash/nor/lpc2000.c
@@ -719,7 +719,7 @@ static int lpc2000_iap_working_area_init(struct flash_bank *bank, struct working
 
        int retval = target_write_memory(target, (*iap_working_area)->address, 4, 2, jump_gate);
        if (retval != ERROR_OK) {
-               LOG_ERROR("Write memory at address 0x%8.8" TARGET_PRIxADDR " failed (check work_area definition)",
+               LOG_ERROR("Write memory at address " TARGET_ADDR_FMT " failed (check work_area definition)",
                                (*iap_working_area)->address);
                target_free_working_area(target, *iap_working_area);
        }
@@ -1186,8 +1186,8 @@ static int lpc2000_write(struct flash_bank *bank, const uint8_t *buffer, uint32_
                        free(last_buffer);
                }
 
-               LOG_DEBUG("writing 0x%" PRIx32 " bytes to address 0x%" PRIx32, thisrun_bytes,
-                               bank->base + offset + bytes_written);
+               LOG_DEBUG("writing 0x%" PRIx32 " bytes to address " TARGET_ADDR_FMT,
+                               thisrun_bytes, bank->base + offset + bytes_written);
 
                /* Write data */
                param_table[0] = bank->base + offset + bytes_written;