* GNU General Public License for more details. *
* *
* You should have received a copy of the GNU General Public License *
- * along with this program; if not, write to the *
- * Free Software Foundation, Inc., *
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
+ * along with this program. If not, see <http://www.gnu.org/licenses/>. *
***************************************************************************/
-#ifndef FLASH_NOR_DRIVER_H
-#define FLASH_NOR_DRIVER_H
+
+#ifndef OPENOCD_FLASH_NOR_DRIVER_H
+#define OPENOCD_FLASH_NOR_DRIVER_H
struct flash_bank;
* corresponding static <code>flash_driver_<i>callback</i>()</code>
* routine in flash.c.
*/
-struct flash_driver
-{
+struct flash_driver {
/**
* Gives a human-readable name of this flash driver,
* This field is used to select and initialize the driver.
*/
- char *name;
+ const char *name;
+
+ /**
+ * Gives a human-readable description of arguments.
+ */
+ const char *usage;
/**
* An array of driver-specific commands to register. When called
* @param last The number of the last sector to erase, typically N-1.
* @returns ERROR_OK if successful; otherwise, an error code.
*/
- int (*erase)(struct flash_bank *bank, int first, int last);
+ int (*erase)(struct flash_bank *bank, unsigned int first,
+ unsigned int last);
/**
* Bank/sector protection routine (target-specific).
*
+ * If protection is not implemented, set method to NULL
+ *
* When called, the driver should enable/disable protection
* for MINIMUM the range covered by first..last sectors
* inclusive. Some chips have alignment requirements will
*
* @param bank The bank to protect or unprotect.
* @param set If non-zero, enable protection; if 0, disable it.
- * @param first The first sector to (un)protect, typicaly 0.
+ * @param first The first sector to (un)protect, typically 0.
* @param last The last sector to (un)project, typically N-1.
* @returns ERROR_OK if successful; otherwise, an error code.
*/
- int (*protect)(struct flash_bank *bank, int set, int first, int last);
+ int (*protect)(struct flash_bank *bank, int set, unsigned int first,
+ unsigned int last);
/**
* Program data into the flash. Note CPU address will be
* @returns ERROR_OK if successful; otherwise, an error code.
*/
int (*write)(struct flash_bank *bank,
- uint8_t *buffer, uint32_t offset, uint32_t count);
+ const uint8_t *buffer, uint32_t offset, uint32_t count);
/**
* Read data from the flash. Note CPU address will be
int (*read)(struct flash_bank *bank,
uint8_t *buffer, uint32_t offset, uint32_t count);
+ /**
+ * Verify data in flash. Note CPU address will be
+ * "bank->base + offset", while the physical address is
+ * dependent upon current target MMU mappings.
+ *
+ * @param bank The bank to verify
+ * @param buffer The data bytes to verify against.
+ * @param offset The offset into the chip to verify.
+ * @param count The number of bytes to verify.
+ * @returns ERROR_OK if successful; otherwise, an error code.
+ */
+ int (*verify)(struct flash_bank *bank,
+ const uint8_t *buffer, uint32_t offset, uint32_t count);
+
/**
* Probe to determine what kind of flash is present.
* This is invoked by the "probe" script command.
* flash_sector_s::is_protected field for each of the flash
* bank's sectors.
*
+ * If protection is not implemented, set method to NULL
+ *
* @param bank - the bank to check
* @returns ERROR_OK if successful; otherwise, an error code.
*/
int (*info)(struct flash_bank *bank, char *buf, int buf_size);
/**
- * A more gentle flavor of filash_driver_s::probe, performing
+ * A more gentle flavor of flash_driver_s::probe, performing
* setup with less noise. Generally, driver routines should test
- * to seee if the bank has already been probed; if it has, the
+ * to see if the bank has already been probed; if it has, the
* driver probably should not perform its probe a second time.
*
* This callback is often called from the inside of other
* routines (e.g. GDB flash downloads) to autoprobe the flash as
- * it is programing the flash.
+ * it is programming the flash.
*
* @param bank - the bank to probe
* @returns ERROR_OK if successful; otherwise, an error code.
*/
int (*auto_probe)(struct flash_bank *bank);
+
+ /**
+ * Deallocates private driver structures.
+ * Use default_flash_free_driver_priv() to simply free(bank->driver_priv)
+ *
+ * @param bank - the bank being destroyed
+ */
+ void (*free_driver_priv)(struct flash_bank *bank);
};
-#define FLASH_BANK_COMMAND_HANDLER(name) static __FLASH_BANK_COMMAND(name)
+#define FLASH_BANK_COMMAND_HANDLER(name) \
+ static __FLASH_BANK_COMMAND(name)
/**
* Find a NOR flash driver by its name.
* @param name The name of the requested driver.
* @returns The flash_driver called @c name, or NULL if not found.
*/
-struct flash_driver *flash_driver_find_by_name(const char *name);
+const struct flash_driver *flash_driver_find_by_name(const char *name);
-#endif // FLASH_NOR_DRIVER_H
+#endif /* OPENOCD_FLASH_NOR_DRIVER_H */
projects / fw / openocd / blobdiff