+// SPDX-License-Identifier: GPL-2.0-or-later
+
/***************************************************************************
* Copyright (C) 2005, 2007 by Dominic Rath *
* Dominic.Rath@gmx.de *
* michael@schwingen.org *
* Copyright (C) 2010 Øyvind Harboe <oyvind.harboe@zylin.com> *
* Copyright (C) 2010 by Antonio Borneo <borneo.antonio@gmail.com> *
- * *
- * This program is free software; you can redistribute it and/or modify *
- * it under the terms of the GNU General Public License as published by *
- * the Free Software Foundation; either version 2 of the License, or *
- * (at your option) any later version. *
- * *
- * This program is distributed in the hope that it will be useful, *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
- * GNU General Public License for more details. *
- * *
- * You should have received a copy of the GNU General Public License *
- * along with this program; if not, write to the *
- * Free Software Foundation, Inc., *
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. *
***************************************************************************/
#ifdef HAVE_CONFIG_H
#include <helper/binarybuffer.h>
#include <target/algorithm.h>
-#define CFI_MAX_BUS_WIDTH 4
-#define CFI_MAX_CHIP_WIDTH 4
-
/* defines internal maximum size for code fragment in cfi_intel_write_block() */
#define CFI_MAX_INTEL_CODESIZE 256
static void cfi_fixup(struct flash_bank *bank, const struct cfi_fixup *fixups)
{
struct cfi_flash_bank *cfi_info = bank->driver_priv;
- const struct cfi_fixup *f;
- for (f = fixups; f->fixup; f++) {
+ for (const struct cfi_fixup *f = fixups; f->fixup; f++) {
if (((f->mfr == CFI_MFR_ANY) || (f->mfr == cfi_info->manufacturer)) &&
((f->id == CFI_ID_ANY) || (f->id == cfi_info->device_id)))
f->fixup(bank, f->param);
}
}
-static inline uint32_t flash_address(struct flash_bank *bank, int sector, uint32_t offset)
+uint32_t cfi_flash_address(struct flash_bank *bank, int sector, uint32_t offset)
{
struct cfi_flash_bank *cfi_info = bank->driver_priv;
}
}
+static int cfi_target_write_memory(struct flash_bank *bank, target_addr_t addr,
+ uint32_t count, const uint8_t *buffer)
+{
+ struct cfi_flash_bank *cfi_info = bank->driver_priv;
+ if (cfi_info->write_mem) {
+ return cfi_info->write_mem(bank, addr, count, buffer);
+ } else {
+ return target_write_memory(bank->target, addr, bank->bus_width,
+ count, buffer);
+ }
+}
+
+int cfi_target_read_memory(struct flash_bank *bank, target_addr_t addr,
+ uint32_t count, uint8_t *buffer)
+{
+ struct cfi_flash_bank *cfi_info = bank->driver_priv;
+ if (cfi_info->read_mem) {
+ return cfi_info->read_mem(bank, addr, count, buffer);
+ } else {
+ return target_read_memory(bank->target, addr, bank->bus_width,
+ count, buffer);
+ }
+}
+
static void cfi_command(struct flash_bank *bank, uint8_t cmd, uint8_t *cmd_buf)
{
- int i;
struct cfi_flash_bank *cfi_info = bank->driver_priv;
/* clear whole buffer, to ensure bits that exceed the bus_width
* are set to zero
*/
- for (i = 0; i < CFI_MAX_BUS_WIDTH; i++)
+ for (size_t i = 0; i < CFI_MAX_BUS_WIDTH; i++)
cmd_buf[i] = 0;
if (cfi_info->endianness == TARGET_LITTLE_ENDIAN) {
- for (i = bank->bus_width; i > 0; i--)
+ for (unsigned int i = bank->bus_width; i > 0; i--)
*cmd_buf++ = (i & (bank->chip_width - 1)) ? 0x0 : cmd;
} else {
- for (i = 1; i <= bank->bus_width; i++)
+ for (unsigned int i = 1; i <= bank->bus_width; i++)
*cmd_buf++ = (i & (bank->chip_width - 1)) ? 0x0 : cmd;
}
}
-static int cfi_send_command(struct flash_bank *bank, uint8_t cmd, uint32_t address)
+int cfi_send_command(struct flash_bank *bank, uint8_t cmd, uint32_t address)
{
uint8_t command[CFI_MAX_BUS_WIDTH];
cfi_command(bank, cmd, command);
- return target_write_memory(bank->target, address, bank->bus_width, 1, command);
+ return cfi_target_write_memory(bank, address, 1, command);
}
/* read unsigned 8-bit value from the bank
*/
static int cfi_query_u8(struct flash_bank *bank, int sector, uint32_t offset, uint8_t *val)
{
- struct target *target = bank->target;
struct cfi_flash_bank *cfi_info = bank->driver_priv;
uint8_t data[CFI_MAX_BUS_WIDTH];
int retval;
- retval = target_read_memory(target, flash_address(bank, sector, offset),
- bank->bus_width, 1, data);
+ retval = cfi_target_read_memory(bank, cfi_flash_address(bank, sector, offset),
+ 1, data);
if (retval != ERROR_OK)
return retval;
*/
static int cfi_get_u8(struct flash_bank *bank, int sector, uint32_t offset, uint8_t *val)
{
- struct target *target = bank->target;
struct cfi_flash_bank *cfi_info = bank->driver_priv;
uint8_t data[CFI_MAX_BUS_WIDTH];
- int i;
int retval;
- retval = target_read_memory(target, flash_address(bank, sector, offset),
- bank->bus_width, 1, data);
+ retval = cfi_target_read_memory(bank, cfi_flash_address(bank, sector, offset),
+ 1, data);
if (retval != ERROR_OK)
return retval;
if (cfi_info->endianness == TARGET_LITTLE_ENDIAN) {
- for (i = 0; i < bank->bus_width / bank->chip_width; i++)
+ for (unsigned int i = 0; i < bank->bus_width / bank->chip_width; i++)
data[0] |= data[i];
*val = data[0];
} else {
uint8_t value = 0;
- for (i = 0; i < bank->bus_width / bank->chip_width; i++)
+ for (unsigned int i = 0; i < bank->bus_width / bank->chip_width; i++)
value |= data[bank->bus_width - 1 - i];
*val = value;
static int cfi_query_u16(struct flash_bank *bank, int sector, uint32_t offset, uint16_t *val)
{
- struct target *target = bank->target;
struct cfi_flash_bank *cfi_info = bank->driver_priv;
uint8_t data[CFI_MAX_BUS_WIDTH * 2];
int retval;
if (cfi_info->x16_as_x8) {
- uint8_t i;
- for (i = 0; i < 2; i++) {
- retval = target_read_memory(target, flash_address(bank, sector, offset + i),
- bank->bus_width, 1, &data[i * bank->bus_width]);
+ for (uint8_t i = 0; i < 2; i++) {
+ retval = cfi_target_read_memory(bank, cfi_flash_address(bank, sector, offset + i),
+ 1, &data[i * bank->bus_width]);
if (retval != ERROR_OK)
return retval;
}
} else {
- retval = target_read_memory(target, flash_address(bank, sector, offset),
- bank->bus_width, 2, data);
+ retval = cfi_target_read_memory(bank, cfi_flash_address(bank, sector, offset),
+ 2, data);
if (retval != ERROR_OK)
return retval;
}
static int cfi_query_u32(struct flash_bank *bank, int sector, uint32_t offset, uint32_t *val)
{
- struct target *target = bank->target;
struct cfi_flash_bank *cfi_info = bank->driver_priv;
uint8_t data[CFI_MAX_BUS_WIDTH * 4];
int retval;
if (cfi_info->x16_as_x8) {
- uint8_t i;
- for (i = 0; i < 4; i++) {
- retval = target_read_memory(target, flash_address(bank, sector, offset + i),
- bank->bus_width, 1, &data[i * bank->bus_width]);
+ for (uint8_t i = 0; i < 4; i++) {
+ retval = cfi_target_read_memory(bank, cfi_flash_address(bank, sector, offset + i),
+ 1, &data[i * bank->bus_width]);
if (retval != ERROR_OK)
return retval;
}
} else {
- retval = target_read_memory(target, flash_address(bank, sector, offset),
- bank->bus_width, 4, data);
+ retval = cfi_target_read_memory(bank, cfi_flash_address(bank, sector, offset),
+ 4, data);
if (retval != ERROR_OK)
return retval;
}
return ERROR_OK;
}
-static int cfi_reset(struct flash_bank *bank)
+int cfi_reset(struct flash_bank *bank)
{
struct cfi_flash_bank *cfi_info = bank->driver_priv;
int retval = ERROR_OK;
- retval = cfi_send_command(bank, 0xf0, flash_address(bank, 0, 0x0));
+ retval = cfi_send_command(bank, 0xf0, cfi_flash_address(bank, 0, 0x0));
if (retval != ERROR_OK)
return retval;
- retval = cfi_send_command(bank, 0xff, flash_address(bank, 0, 0x0));
+ retval = cfi_send_command(bank, 0xff, cfi_flash_address(bank, 0, 0x0));
if (retval != ERROR_OK)
return retval;
(cfi_info->device_id == 0x227E || cfi_info->device_id == 0x7E)) {
/* Numonix M29W128G is cmd 0xFF intolerant - causes internal undefined state
* so we send an extra 0xF0 reset to fix the bug */
- retval = cfi_send_command(bank, 0xf0, flash_address(bank, 0, 0x00));
+ retval = cfi_send_command(bank, 0xf0, cfi_flash_address(bank, 0, 0x00));
if (retval != ERROR_OK)
return retval;
}
static void cfi_intel_clear_status_register(struct flash_bank *bank)
{
- cfi_send_command(bank, 0x50, flash_address(bank, 0, 0x0));
+ cfi_send_command(bank, 0x50, cfi_flash_address(bank, 0, 0x0));
}
static int cfi_intel_wait_status_busy(struct flash_bank *bank, int timeout, uint8_t *val)
return retval;
}
-static int cfi_spansion_wait_status_busy(struct flash_bank *bank, int timeout)
+int cfi_spansion_wait_status_busy(struct flash_bank *bank, int timeout)
{
uint8_t status, oldstatus;
struct cfi_flash_bank *cfi_info = bank->driver_priv;
struct cfi_flash_bank *cfi_info = bank->driver_priv;
struct cfi_intel_pri_ext *pri_ext;
- if (cfi_info->pri_ext)
- free(cfi_info->pri_ext);
+ free(cfi_info->pri_ext);
pri_ext = malloc(sizeof(struct cfi_intel_pri_ext));
- if (pri_ext == NULL) {
+ if (!pri_ext) {
LOG_ERROR("Out of memory");
return ERROR_FAIL;
}
struct cfi_flash_bank *cfi_info = bank->driver_priv;
struct cfi_spansion_pri_ext *pri_ext;
- if (cfi_info->pri_ext)
- free(cfi_info->pri_ext);
+ free(cfi_info->pri_ext);
pri_ext = malloc(sizeof(struct cfi_spansion_pri_ext));
- if (pri_ext == NULL) {
+ if (!pri_ext) {
LOG_ERROR("Out of memory");
return ERROR_FAIL;
}
pri_ext->_reversed_geometry = 0;
if ((pri_ext->pri[0] != 'P') || (pri_ext->pri[1] != 'R') || (pri_ext->pri[2] != 'I')) {
- retval = cfi_send_command(bank, 0xf0, flash_address(bank, 0, 0x0));
+ retval = cfi_send_command(bank, 0xf0, cfi_flash_address(bank, 0, 0x0));
if (retval != ERROR_OK)
return retval;
LOG_ERROR("Could not read spansion bank information");
LOG_DEBUG("pri: '%c%c%c', version: %c.%c", pri_ext->pri[0], pri_ext->pri[1],
pri_ext->pri[2], pri_ext->major_version, pri_ext->minor_version);
- retval = cfi_query_u8(bank, 0, cfi_info->pri_addr + 5, &pri_ext->SiliconRevision);
+ retval = cfi_query_u8(bank, 0, cfi_info->pri_addr + 5, &pri_ext->silicon_revision);
if (retval != ERROR_OK)
return retval;
- retval = cfi_query_u8(bank, 0, cfi_info->pri_addr + 6, &pri_ext->EraseSuspend);
+ retval = cfi_query_u8(bank, 0, cfi_info->pri_addr + 6, &pri_ext->erase_suspend);
if (retval != ERROR_OK)
return retval;
- retval = cfi_query_u8(bank, 0, cfi_info->pri_addr + 7, &pri_ext->BlkProt);
+ retval = cfi_query_u8(bank, 0, cfi_info->pri_addr + 7, &pri_ext->blk_prot);
if (retval != ERROR_OK)
return retval;
- retval = cfi_query_u8(bank, 0, cfi_info->pri_addr + 8, &pri_ext->TmpBlkUnprotect);
+ retval = cfi_query_u8(bank, 0, cfi_info->pri_addr + 8, &pri_ext->tmp_blk_unprotected);
if (retval != ERROR_OK)
return retval;
- retval = cfi_query_u8(bank, 0, cfi_info->pri_addr + 9, &pri_ext->BlkProtUnprot);
+ retval = cfi_query_u8(bank, 0, cfi_info->pri_addr + 9, &pri_ext->blk_prot_unprot);
if (retval != ERROR_OK)
return retval;
- retval = cfi_query_u8(bank, 0, cfi_info->pri_addr + 10, &pri_ext->SimultaneousOps);
+ retval = cfi_query_u8(bank, 0, cfi_info->pri_addr + 10, &pri_ext->simultaneous_ops);
if (retval != ERROR_OK)
return retval;
- retval = cfi_query_u8(bank, 0, cfi_info->pri_addr + 11, &pri_ext->BurstMode);
+ retval = cfi_query_u8(bank, 0, cfi_info->pri_addr + 11, &pri_ext->burst_mode);
if (retval != ERROR_OK)
return retval;
- retval = cfi_query_u8(bank, 0, cfi_info->pri_addr + 12, &pri_ext->PageMode);
+ retval = cfi_query_u8(bank, 0, cfi_info->pri_addr + 12, &pri_ext->page_mode);
if (retval != ERROR_OK)
return retval;
- retval = cfi_query_u8(bank, 0, cfi_info->pri_addr + 13, &pri_ext->VppMin);
+ retval = cfi_query_u8(bank, 0, cfi_info->pri_addr + 13, &pri_ext->vpp_min);
if (retval != ERROR_OK)
return retval;
- retval = cfi_query_u8(bank, 0, cfi_info->pri_addr + 14, &pri_ext->VppMax);
+ retval = cfi_query_u8(bank, 0, cfi_info->pri_addr + 14, &pri_ext->vpp_max);
if (retval != ERROR_OK)
return retval;
- retval = cfi_query_u8(bank, 0, cfi_info->pri_addr + 15, &pri_ext->TopBottom);
+ retval = cfi_query_u8(bank, 0, cfi_info->pri_addr + 15, &pri_ext->top_bottom);
if (retval != ERROR_OK)
return retval;
LOG_DEBUG("Silicon Revision: 0x%x, Erase Suspend: 0x%x, Block protect: 0x%x",
- pri_ext->SiliconRevision, pri_ext->EraseSuspend, pri_ext->BlkProt);
+ pri_ext->silicon_revision, pri_ext->erase_suspend, pri_ext->blk_prot);
LOG_DEBUG("Temporary Unprotect: 0x%x, Block Protect Scheme: 0x%x, "
- "Simultaneous Ops: 0x%x", pri_ext->TmpBlkUnprotect,
- pri_ext->BlkProtUnprot, pri_ext->SimultaneousOps);
+ "Simultaneous Ops: 0x%x", pri_ext->tmp_blk_unprotected,
+ pri_ext->blk_prot_unprot, pri_ext->simultaneous_ops);
- LOG_DEBUG("Burst Mode: 0x%x, Page Mode: 0x%x, ", pri_ext->BurstMode, pri_ext->PageMode);
+ LOG_DEBUG("Burst Mode: 0x%x, Page Mode: 0x%x, ", pri_ext->burst_mode, pri_ext->page_mode);
LOG_DEBUG("Vpp min: %u.%x, Vpp max: %u.%x",
- (pri_ext->VppMin & 0xf0) >> 4, pri_ext->VppMin & 0x0f,
- (pri_ext->VppMax & 0xf0) >> 4, pri_ext->VppMax & 0x0f);
+ (pri_ext->vpp_min & 0xf0) >> 4, pri_ext->vpp_min & 0x0f,
+ (pri_ext->vpp_max & 0xf0) >> 4, pri_ext->vpp_max & 0x0f);
- LOG_DEBUG("WP# protection 0x%x", pri_ext->TopBottom);
+ LOG_DEBUG("WP# protection 0x%x", pri_ext->top_bottom);
return ERROR_OK;
}
struct cfi_flash_bank *cfi_info = bank->driver_priv;
struct cfi_spansion_pri_ext *pri_ext;
- if (cfi_info->pri_ext)
- free(cfi_info->pri_ext);
+ free(cfi_info->pri_ext);
pri_ext = malloc(sizeof(struct cfi_spansion_pri_ext));
- if (pri_ext == NULL) {
+ if (!pri_ext) {
LOG_ERROR("Out of memory");
return ERROR_FAIL;
}
if ((atmel_pri_ext.pri[0] != 'P') || (atmel_pri_ext.pri[1] != 'R')
|| (atmel_pri_ext.pri[2] != 'I')) {
- retval = cfi_send_command(bank, 0xf0, flash_address(bank, 0, 0x0));
+ retval = cfi_send_command(bank, 0xf0, cfi_flash_address(bank, 0, 0x0));
if (retval != ERROR_OK)
return retval;
LOG_ERROR("Could not read atmel bank information");
atmel_pri_ext.page_mode);
if (atmel_pri_ext.features & 0x02)
- pri_ext->EraseSuspend = 2;
+ pri_ext->erase_suspend = 2;
/* some chips got it backwards... */
if (cfi_info->device_id == AT49BV6416 ||
cfi_info->device_id == AT49BV6416T) {
if (atmel_pri_ext.bottom_boot)
- pri_ext->TopBottom = 3;
+ pri_ext->top_bottom = 3;
else
- pri_ext->TopBottom = 2;
+ pri_ext->top_bottom = 2;
} else {
if (atmel_pri_ext.bottom_boot)
- pri_ext->TopBottom = 2;
+ pri_ext->top_bottom = 2;
else
- pri_ext->TopBottom = 3;
+ pri_ext->top_bottom = 3;
}
pri_ext->_unlock1 = cfi_unlock_addresses[CFI_UNLOCK_555_2AA].unlock1;
return cfi_read_spansion_pri_ext(bank);
}
-static int cfi_spansion_info(struct flash_bank *bank, char *buf, int buf_size)
+static int cfi_spansion_info(struct flash_bank *bank, struct command_invocation *cmd)
{
- int printed;
struct cfi_flash_bank *cfi_info = bank->driver_priv;
struct cfi_spansion_pri_ext *pri_ext = cfi_info->pri_ext;
- printed = snprintf(buf, buf_size, "\nSpansion primary algorithm extend information:\n");
- buf += printed;
- buf_size -= printed;
+ command_print_sameline(cmd, "\nSpansion primary algorithm extend information:\n");
- printed = snprintf(buf, buf_size, "pri: '%c%c%c', version: %c.%c\n", pri_ext->pri[0],
- pri_ext->pri[1], pri_ext->pri[2],
+ command_print_sameline(cmd, "pri: '%c%c%c', version: %c.%c\n",
+ pri_ext->pri[0], pri_ext->pri[1], pri_ext->pri[2],
pri_ext->major_version, pri_ext->minor_version);
- buf += printed;
- buf_size -= printed;
- printed = snprintf(buf, buf_size, "Silicon Rev.: 0x%x, Address Sensitive unlock: 0x%x\n",
- (pri_ext->SiliconRevision) >> 2,
- (pri_ext->SiliconRevision) & 0x03);
- buf += printed;
- buf_size -= printed;
+ command_print_sameline(cmd, "Silicon Rev.: 0x%x, Address Sensitive unlock: 0x%x\n",
+ (pri_ext->silicon_revision) >> 2,
+ (pri_ext->silicon_revision) & 0x03);
- printed = snprintf(buf, buf_size, "Erase Suspend: 0x%x, Sector Protect: 0x%x\n",
- pri_ext->EraseSuspend,
- pri_ext->BlkProt);
- buf += printed;
- buf_size -= printed;
+ command_print_sameline(cmd, "Erase Suspend: 0x%x, Sector Protect: 0x%x\n",
+ pri_ext->erase_suspend,
+ pri_ext->blk_prot);
- snprintf(buf, buf_size, "VppMin: %u.%x, VppMax: %u.%x\n",
- (pri_ext->VppMin & 0xf0) >> 4, pri_ext->VppMin & 0x0f,
- (pri_ext->VppMax & 0xf0) >> 4, pri_ext->VppMax & 0x0f);
+ command_print_sameline(cmd, "VppMin: %u.%x, VppMax: %u.%x\n",
+ (pri_ext->vpp_min & 0xf0) >> 4, pri_ext->vpp_min & 0x0f,
+ (pri_ext->vpp_max & 0xf0) >> 4, pri_ext->vpp_max & 0x0f);
return ERROR_OK;
}
-static int cfi_intel_info(struct flash_bank *bank, char *buf, int buf_size)
+static int cfi_intel_info(struct flash_bank *bank, struct command_invocation *cmd)
{
- int printed;
struct cfi_flash_bank *cfi_info = bank->driver_priv;
struct cfi_intel_pri_ext *pri_ext = cfi_info->pri_ext;
- printed = snprintf(buf, buf_size, "\nintel primary algorithm extend information:\n");
- buf += printed;
- buf_size -= printed;
+ command_print_sameline(cmd, "\nintel primary algorithm extend information:\n");
- printed = snprintf(buf,
- buf_size,
- "pri: '%c%c%c', version: %c.%c\n",
+ command_print_sameline(cmd, "pri: '%c%c%c', version: %c.%c\n",
pri_ext->pri[0],
pri_ext->pri[1],
pri_ext->pri[2],
pri_ext->major_version,
pri_ext->minor_version);
- buf += printed;
- buf_size -= printed;
- printed = snprintf(buf,
- buf_size,
- "feature_support: 0x%" PRIx32 ", "
+ command_print_sameline(cmd, "feature_support: 0x%" PRIx32 ", "
"suspend_cmd_support: 0x%x, blk_status_reg_mask: 0x%x\n",
pri_ext->feature_support,
pri_ext->suspend_cmd_support,
pri_ext->blk_status_reg_mask);
- buf += printed;
- buf_size -= printed;
- printed = snprintf(buf, buf_size, "Vcc opt: %x.%x, Vpp opt: %u.%x\n",
+ command_print_sameline(cmd, "Vcc opt: %x.%x, Vpp opt: %u.%x\n",
(pri_ext->vcc_optimal & 0xf0) >> 4, pri_ext->vcc_optimal & 0x0f,
(pri_ext->vpp_optimal & 0xf0) >> 4, pri_ext->vpp_optimal & 0x0f);
- buf += printed;
- buf_size -= printed;
- snprintf(buf, buf_size, "protection_fields: %i, prot_reg_addr: 0x%x, "
+ command_print_sameline(cmd, "protection_fields: %i, prot_reg_addr: 0x%x, "
"factory pre-programmed: %i, user programmable: %i\n",
pri_ext->num_protection_fields, pri_ext->prot_reg_addr,
1 << pri_ext->fact_prot_reg_size, 1 << pri_ext->user_prot_reg_size);
return ERROR_OK;
}
-/* flash_bank cfi <base> <size> <chip_width> <bus_width> <target#> [options]
- */
-FLASH_BANK_COMMAND_HANDLER(cfi_flash_bank_command)
+int cfi_flash_bank_cmd(struct flash_bank *bank, unsigned int argc, const char **argv)
{
struct cfi_flash_bank *cfi_info;
- int bus_swap = 0;
+ bool bus_swap = false;
- if (CMD_ARGC < 6)
+ if (argc < 6)
return ERROR_COMMAND_SYNTAX_ERROR;
/* both widths must:
return ERROR_FLASH_BANK_INVALID;
}
- cfi_info = malloc(sizeof(struct cfi_flash_bank));
- cfi_info->probed = 0;
- cfi_info->erase_region_info = NULL;
- cfi_info->pri_ext = NULL;
+ cfi_info = calloc(1, sizeof(struct cfi_flash_bank));
+ if (!cfi_info) {
+ LOG_ERROR("No memory for flash bank info");
+ return ERROR_FAIL;
+ }
bank->driver_priv = cfi_info;
- cfi_info->x16_as_x8 = 0;
- cfi_info->jedec_probe = 0;
- cfi_info->not_cfi = 0;
-
- for (unsigned i = 6; i < CMD_ARGC; i++) {
- if (strcmp(CMD_ARGV[i], "x16_as_x8") == 0)
- cfi_info->x16_as_x8 = 1;
- else if (strcmp(CMD_ARGV[i], "bus_swap") == 0)
- bus_swap = 1;
- else if (strcmp(CMD_ARGV[i], "jedec_probe") == 0)
- cfi_info->jedec_probe = 1;
+ for (unsigned i = 6; i < argc; i++) {
+ if (strcmp(argv[i], "x16_as_x8") == 0)
+ cfi_info->x16_as_x8 = true;
+ else if (strcmp(argv[i], "data_swap") == 0)
+ cfi_info->data_swap = true;
+ else if (strcmp(argv[i], "bus_swap") == 0)
+ bus_swap = true;
+ else if (strcmp(argv[i], "jedec_probe") == 0)
+ cfi_info->jedec_probe = true;
}
if (bus_swap)
return ERROR_OK;
}
-static int cfi_intel_erase(struct flash_bank *bank, int first, int last)
+/* flash_bank cfi <base> <size> <chip_width> <bus_width> <target#> [options]
+ */
+FLASH_BANK_COMMAND_HANDLER(cfi_flash_bank_command)
+{
+ return cfi_flash_bank_cmd(bank, CMD_ARGC, CMD_ARGV);
+}
+
+static int cfi_intel_erase(struct flash_bank *bank, unsigned int first,
+ unsigned int last)
{
int retval;
struct cfi_flash_bank *cfi_info = bank->driver_priv;
- int i;
cfi_intel_clear_status_register(bank);
- for (i = first; i <= last; i++) {
- retval = cfi_send_command(bank, 0x20, flash_address(bank, i, 0x0));
+ for (unsigned int i = first; i <= last; i++) {
+ retval = cfi_send_command(bank, 0x20, cfi_flash_address(bank, i, 0x0));
if (retval != ERROR_OK)
return retval;
- retval = cfi_send_command(bank, 0xd0, flash_address(bank, i, 0x0));
+ retval = cfi_send_command(bank, 0xd0, cfi_flash_address(bank, i, 0x0));
if (retval != ERROR_OK)
return retval;
if (retval != ERROR_OK)
return retval;
- if (status == 0x80)
- bank->sectors[i].is_erased = 1;
- else {
- retval = cfi_send_command(bank, 0xff, flash_address(bank, 0, 0x0));
+ if (status != 0x80) {
+ retval = cfi_send_command(bank, 0xff, cfi_flash_address(bank, 0, 0x0));
if (retval != ERROR_OK)
return retval;
- LOG_ERROR("couldn't erase block %i of flash bank at base 0x%"
- PRIx32, i, bank->base);
+ LOG_ERROR("couldn't erase block %u of flash bank at base "
+ TARGET_ADDR_FMT, i, bank->base);
return ERROR_FLASH_OPERATION_FAILED;
}
}
- return cfi_send_command(bank, 0xff, flash_address(bank, 0, 0x0));
+ return cfi_send_command(bank, 0xff, cfi_flash_address(bank, 0, 0x0));
}
-static int cfi_spansion_erase(struct flash_bank *bank, int first, int last)
+int cfi_spansion_unlock_seq(struct flash_bank *bank)
{
int retval;
struct cfi_flash_bank *cfi_info = bank->driver_priv;
struct cfi_spansion_pri_ext *pri_ext = cfi_info->pri_ext;
- int i;
- for (i = first; i <= last; i++) {
- retval = cfi_send_command(bank, 0xaa, flash_address(bank, 0, pri_ext->_unlock1));
- if (retval != ERROR_OK)
- return retval;
+ retval = cfi_send_command(bank, 0xaa, cfi_flash_address(bank, 0, pri_ext->_unlock1));
+ if (retval != ERROR_OK)
+ return retval;
- retval = cfi_send_command(bank, 0x55, flash_address(bank, 0, pri_ext->_unlock2));
- if (retval != ERROR_OK)
- return retval;
+ retval = cfi_send_command(bank, 0x55, cfi_flash_address(bank, 0, pri_ext->_unlock2));
+ if (retval != ERROR_OK)
+ return retval;
+
+ return ERROR_OK;
+}
+
+static int cfi_spansion_erase(struct flash_bank *bank, unsigned int first,
+ unsigned int last)
+{
+ int retval;
+ struct cfi_flash_bank *cfi_info = bank->driver_priv;
+ struct cfi_spansion_pri_ext *pri_ext = cfi_info->pri_ext;
- retval = cfi_send_command(bank, 0x80, flash_address(bank, 0, pri_ext->_unlock1));
+ for (unsigned int i = first; i <= last; i++) {
+ retval = cfi_spansion_unlock_seq(bank);
if (retval != ERROR_OK)
return retval;
- retval = cfi_send_command(bank, 0xaa, flash_address(bank, 0, pri_ext->_unlock1));
+ retval = cfi_send_command(bank, 0x80, cfi_flash_address(bank, 0, pri_ext->_unlock1));
if (retval != ERROR_OK)
return retval;
- retval = cfi_send_command(bank, 0x55, flash_address(bank, 0, pri_ext->_unlock2));
+ retval = cfi_spansion_unlock_seq(bank);
if (retval != ERROR_OK)
return retval;
- retval = cfi_send_command(bank, 0x30, flash_address(bank, i, 0x0));
+ retval = cfi_send_command(bank, 0x30, cfi_flash_address(bank, i, 0x0));
if (retval != ERROR_OK)
return retval;
- if (cfi_spansion_wait_status_busy(bank, cfi_info->block_erase_timeout) == ERROR_OK)
- bank->sectors[i].is_erased = 1;
- else {
- retval = cfi_send_command(bank, 0xf0, flash_address(bank, 0, 0x0));
+ if (cfi_spansion_wait_status_busy(bank, cfi_info->block_erase_timeout) != ERROR_OK) {
+ retval = cfi_send_command(bank, 0xf0, cfi_flash_address(bank, 0, 0x0));
if (retval != ERROR_OK)
return retval;
- LOG_ERROR("couldn't erase block %i of flash bank at base 0x%"
- PRIx32, i, bank->base);
+ LOG_ERROR("couldn't erase block %i of flash bank at base "
+ TARGET_ADDR_FMT, i, bank->base);
return ERROR_FLASH_OPERATION_FAILED;
}
}
- return cfi_send_command(bank, 0xf0, flash_address(bank, 0, 0x0));
+ return cfi_send_command(bank, 0xf0, cfi_flash_address(bank, 0, 0x0));
}
-static int cfi_erase(struct flash_bank *bank, int first, int last)
+int cfi_erase(struct flash_bank *bank, unsigned int first,
+ unsigned int last)
{
struct cfi_flash_bank *cfi_info = bank->driver_priv;
return ERROR_TARGET_NOT_HALTED;
}
- if ((first < 0) || (last < first) || (last >= bank->num_sectors))
+ if ((last < first) || (last >= bank->num_sectors))
return ERROR_FLASH_SECTOR_INVALID;
if (cfi_info->qry[0] != 'Q')
case 1:
case 3:
return cfi_intel_erase(bank, first, last);
- break;
case 2:
return cfi_spansion_erase(bank, first, last);
- break;
default:
LOG_ERROR("cfi primary command set %i unsupported", cfi_info->pri_id);
break;
return ERROR_OK;
}
-static int cfi_intel_protect(struct flash_bank *bank, int set, int first, int last)
+static int cfi_intel_protect(struct flash_bank *bank, int set,
+ unsigned int first, unsigned int last)
{
int retval;
struct cfi_flash_bank *cfi_info = bank->driver_priv;
struct cfi_intel_pri_ext *pri_ext = cfi_info->pri_ext;
int retry = 0;
- int i;
/* if the device supports neither legacy lock/unlock (bit 3) nor
* instant individual block locking (bit 5).
cfi_intel_clear_status_register(bank);
- for (i = first; i <= last; i++) {
- retval = cfi_send_command(bank, 0x60, flash_address(bank, i, 0x0));
+ for (unsigned int i = first; i <= last; i++) {
+ retval = cfi_send_command(bank, 0x60, cfi_flash_address(bank, i, 0x0));
if (retval != ERROR_OK)
return retval;
if (set) {
- retval = cfi_send_command(bank, 0x01, flash_address(bank, i, 0x0));
+ retval = cfi_send_command(bank, 0x01, cfi_flash_address(bank, i, 0x0));
if (retval != ERROR_OK)
return retval;
bank->sectors[i].is_protected = 1;
} else {
- retval = cfi_send_command(bank, 0xd0, flash_address(bank, i, 0x0));
+ retval = cfi_send_command(bank, 0xd0, cfi_flash_address(bank, i, 0x0));
if (retval != ERROR_OK)
return retval;
bank->sectors[i].is_protected = 0;
} else {
uint8_t block_status;
/* read block lock bit, to verify status */
- retval = cfi_send_command(bank, 0x90, flash_address(bank, 0, 0x55));
+ retval = cfi_send_command(bank, 0x90, cfi_flash_address(bank, 0, 0x55));
if (retval != ERROR_OK)
return retval;
retval = cfi_get_u8(bank, i, 0x2, &block_status);
LOG_ERROR(
"couldn't change block lock status (set = %i, block_status = 0x%2.2x)",
set, block_status);
- retval = cfi_send_command(bank, 0x70, flash_address(bank, 0, 0x55));
+ retval = cfi_send_command(bank, 0x70, cfi_flash_address(bank, 0, 0x55));
if (retval != ERROR_OK)
return retval;
uint8_t status;
* 3. re-protect what should be protected.
*
*/
- for (i = 0; i < bank->num_sectors; i++) {
+ for (unsigned int i = 0; i < bank->num_sectors; i++) {
if (bank->sectors[i].is_protected == 1) {
cfi_intel_clear_status_register(bank);
- retval = cfi_send_command(bank, 0x60, flash_address(bank, i, 0x0));
+ retval = cfi_send_command(bank, 0x60, cfi_flash_address(bank, i, 0x0));
if (retval != ERROR_OK)
return retval;
- retval = cfi_send_command(bank, 0x01, flash_address(bank, i, 0x0));
+ retval = cfi_send_command(bank, 0x01, cfi_flash_address(bank, i, 0x0));
if (retval != ERROR_OK)
return retval;
}
}
- return cfi_send_command(bank, 0xff, flash_address(bank, 0, 0x0));
+ return cfi_send_command(bank, 0xff, cfi_flash_address(bank, 0, 0x0));
}
-static int cfi_protect(struct flash_bank *bank, int set, int first, int last)
+int cfi_protect(struct flash_bank *bank, int set, unsigned int first,
+ unsigned int last)
{
struct cfi_flash_bank *cfi_info = bank->driver_priv;
return ERROR_TARGET_NOT_HALTED;
}
- if ((first < 0) || (last < first) || (last >= bank->num_sectors)) {
- LOG_ERROR("Invalid sector range");
- return ERROR_FLASH_SECTOR_INVALID;
- }
-
if (cfi_info->qry[0] != 'Q')
return ERROR_FLASH_BANK_NOT_PROBED;
case 1:
case 3:
return cfi_intel_protect(bank, set, first, last);
- break;
default:
LOG_WARNING("protect: cfi primary command set %i unsupported", cfi_info->pri_id);
return ERROR_OK;
switch (bank->bus_width) {
case 1:
return buf[0];
- break;
case 2:
return target_buffer_get_u16(target, buf);
- break;
case 4:
return target_buffer_get_u32(target, buf);
- break;
default:
- LOG_ERROR("Unsupported bank buswidth %d, can't do block memory writes",
+ LOG_ERROR("Unsupported bank buswidth %u, can't do block memory writes",
bank->bus_width);
return 0;
}
* r6: error test pattern
*/
- /* see contib/loaders/flash/armv4_5_cfi_intel_32.s for src */
+ /* see contrib/loaders/flash/armv4_5_cfi_intel_32.s for src */
static const uint32_t word_32_code[] = {
0xe4904004, /* loop: ldr r4, [r0], #4 */
0xe5813000, /* str r3, [r1] */
0xeafffffe /* done: b -2 */
};
- /* see contib/loaders/flash/armv4_5_cfi_intel_16.s for src */
+ /* see contrib/loaders/flash/armv4_5_cfi_intel_16.s for src */
static const uint32_t word_16_code[] = {
0xe0d040b2, /* loop: ldrh r4, [r0], #2 */
0xe1c130b0, /* strh r3, [r1] */
0xeafffffe /* done: b -2 */
};
- /* see contib/loaders/flash/armv4_5_cfi_intel_8.s for src */
+ /* see contrib/loaders/flash/armv4_5_cfi_intel_8.s for src */
static const uint32_t word_8_code[] = {
0xe4d04001, /* loop: ldrb r4, [r0], #1 */
0xe5c13000, /* strb r3, [r1] */
cfi_intel_clear_status_register(bank);
- /* If we are setting up the write_algorith, we need target_code_src
+ /* If we are setting up the write_algorithm, we need target_code_src
* if not we only need target_code_size. */
/* However, we don't want to create multiple code paths, so we
target_code_size = sizeof(word_32_code);
break;
default:
- LOG_ERROR("Unsupported bank buswidth %d, can't do block memory writes",
+ LOG_ERROR("Unsupported bank buswidth %u, can't do block memory writes",
bank->bus_width);
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
}
LOG_WARNING("No working area available, can't do block memory writes");
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
}
- ;
/* write algorithm code to working area */
retval = target_write_buffer(target, write_algorithm->address,
goto cleanup;
}
}
- ;
/* setup algo registers */
init_reg_param(®_params[0], "r0", 32, PARAM_OUT);
busy_pattern_val = cfi_command_val(bank, 0x80);
error_pattern_val = cfi_command_val(bank, 0x7e);
- LOG_DEBUG("Using target buffer at 0x%08" PRIx32 " and of size 0x%04" PRIx32,
+ LOG_DEBUG("Using target buffer at " TARGET_ADDR_FMT " and of size 0x%04" PRIx32,
source->address, buffer_size);
/* Programming main loop */
if (retval != ERROR_OK) {
cfi_intel_clear_status_register(bank);
LOG_ERROR(
- "Execution of flash algorythm failed. Can't fall back. Please report.");
+ "Execution of flash algorithm failed. Can't fall back. Please report.");
retval = ERROR_FLASH_OPERATION_FAILED;
/* retval = ERROR_TARGET_RESOURCE_NOT_AVAILABLE; */
/* FIXME To allow fall back or recovery, we must save the actual status
/* free up resources */
cleanup:
- if (source)
- target_free_working_area(target, source);
-
+ target_free_working_area(target, source);
target_free_working_area(target, write_algorithm);
destroy_reg_param(®_params[0]);
static const uint32_t mips_word_16_code[] = {
/* start: */
- MIPS32_LHU(9, 0, 4), /* lhu $t1, ($a0) ; out = &saddr */
- MIPS32_ADDI(4, 4, 2), /* addi $a0, $a0, 2 ; saddr += 2 */
- MIPS32_SH(13, 0, 12), /* sh $t5, ($t4) ; *fl_unl_addr1 = fl_unl_cmd1 */
- MIPS32_SH(15, 0, 14), /* sh $t7, ($t6) ; *fl_unl_addr2 = fl_unl_cmd2 */
- MIPS32_SH(7, 0, 12), /* sh $a3, ($t4) ; *fl_unl_addr1 = fl_write_cmd */
- MIPS32_SH(9, 0, 5), /* sh $t1, ($a1) ; *daddr = out */
+ MIPS32_LHU(0, 9, 0, 4), /* lhu $t1, ($a0) ; out = &saddr */
+ MIPS32_ADDI(0, 4, 4, 2), /* addi $a0, $a0, 2 ; saddr += 2 */
+ MIPS32_SH(0, 13, 0, 12), /* sh $t5, ($t4) ; *fl_unl_addr1 = fl_unl_cmd1 */
+ MIPS32_SH(0, 15, 0, 14), /* sh $t7, ($t6) ; *fl_unl_addr2 = fl_unl_cmd2 */
+ MIPS32_SH(0, 7, 0, 12), /* sh $a3, ($t4) ; *fl_unl_addr1 = fl_write_cmd */
+ MIPS32_SH(0, 9, 0, 5), /* sh $t1, ($a1) ; *daddr = out */
MIPS32_NOP, /* nop */
/* busy: */
- MIPS32_LHU(10, 0, 5), /* lhu $t2, ($a1) ; temp1 = *daddr */
- MIPS32_XOR(11, 9, 10), /* xor $t3, $a0, $t2 ; temp2 = out ^ temp1; */
- MIPS32_AND(11, 8, 11), /* and $t3, $t0, $t3 ; temp2 = temp2 & DQ7mask */
- MIPS32_BNE(11, 8, 13), /* bne $t3, $t0, cont ; if (temp2 != DQ7mask) goto cont */
- MIPS32_NOP, /* nop */
-
- MIPS32_SRL(10, 8, 2), /* srl $t2,$t0,2 ; temp1 = DQ7mask >> 2 */
- MIPS32_AND(11, 10, 11), /* and $t3, $t2, $t3 ; temp2 = temp2 & temp1 */
- MIPS32_BNE(11, 10, NEG16(8)), /* bne $t3, $t2, busy ; if (temp2 != temp1) goto busy */
- MIPS32_NOP, /* nop */
-
- MIPS32_LHU(10, 0, 5), /* lhu $t2, ($a1) ; temp1 = *daddr */
- MIPS32_XOR(11, 9, 10), /* xor $t3, $a0, $t2 ; temp2 = out ^ temp1; */
- MIPS32_AND(11, 8, 11), /* and $t3, $t0, $t3 ; temp2 = temp2 & DQ7mask */
- MIPS32_BNE(11, 8, 4), /* bne $t3, $t0, cont ; if (temp2 != DQ7mask) goto cont */
+ MIPS32_LHU(0, 10, 0, 5), /* lhu $t2, ($a1) ; temp1 = *daddr */
+ MIPS32_XOR(0, 11, 9, 10), /* xor $t3, $a0, $t2 ; temp2 = out ^ temp1; */
+ MIPS32_AND(0, 11, 8, 11), /* and $t3, $t0, $t3 ; temp2 = temp2 & DQ7mask */
+ MIPS32_BNE(0, 11, 8, 13), /* bne $t3, $t0, cont ; if (temp2 != DQ7mask) goto cont */
+ MIPS32_NOP, /* nop */
+
+ MIPS32_SRL(0, 10, 8, 2), /* srl $t2,$t0,2 ; temp1 = DQ7mask >> 2 */
+ MIPS32_AND(0, 11, 10, 11), /* and $t3, $t2, $t3 ; temp2 = temp2 & temp1 */
+ MIPS32_BNE(0, 11, 10, NEG16(8)), /* bne $t3, $t2, busy ; if (temp2 != temp1) goto busy */
+ MIPS32_NOP, /* nop */
+
+ MIPS32_LHU(0, 10, 0, 5), /* lhu $t2, ($a1) ; temp1 = *daddr */
+ MIPS32_XOR(0, 11, 9, 10), /* xor $t3, $a0, $t2 ; temp2 = out ^ temp1; */
+ MIPS32_AND(0, 11, 8, 11), /* and $t3, $t0, $t3 ; temp2 = temp2 & DQ7mask */
+ MIPS32_BNE(0, 11, 8, 4), /* bne $t3, $t0, cont ; if (temp2 != DQ7mask) goto cont */
MIPS32_NOP, /* nop */
- MIPS32_XOR(9, 9, 9), /* xor $t1, $t1, $t1 ; out = 0 */
- MIPS32_BEQ(9, 0, 11), /* beq $t1, $zero, done ; if (out == 0) goto done */
+ MIPS32_XOR(0, 9, 9, 9), /* xor $t1, $t1, $t1 ; out = 0 */
+ MIPS32_BEQ(0, 9, 0, 11), /* beq $t1, $zero, done ; if (out == 0) goto done */
MIPS32_NOP, /* nop */
/* cont: */
- MIPS32_ADDI(6, 6, NEG16(1)), /* addi, $a2, $a2, -1 ; numwrites-- */
- MIPS32_BNE(6, 0, 5), /* bne $a2, $zero, cont2 ; if (numwrite != 0) goto cont2 */
+ MIPS32_ADDI(0, 6, 6, NEG16(1)), /* addi, $a2, $a2, -1 ; numwrites-- */
+ MIPS32_BNE(0, 6, 0, 5), /* bne $a2, $zero, cont2 ; if (numwrite != 0) goto cont2 */
MIPS32_NOP, /* nop */
- MIPS32_LUI(9, 0), /* lui $t1, 0 */
- MIPS32_ORI(9, 9, 0x80), /* ori $t1, $t1, 0x80 ; out = 0x80 */
+ MIPS32_LUI(0, 9, 0), /* lui $t1, 0 */
+ MIPS32_ORI(0, 9, 9, 0x80), /* ori $t1, $t1, 0x80 ; out = 0x80 */
- MIPS32_B(4), /* b done ; goto done */
+ MIPS32_B(0, 4), /* b done ; goto done */
MIPS32_NOP, /* nop */
/* cont2: */
- MIPS32_ADDI(5, 5, 2), /* addi $a0, $a0, 2 ; daddr += 2 */
- MIPS32_B(NEG16(33)), /* b start ; goto start */
+ MIPS32_ADDI(0, 5, 5, 2), /* addi $a0, $a0, 2 ; daddr += 2 */
+ MIPS32_B(0, NEG16(33)), /* b start ; goto start */
MIPS32_NOP, /* nop */
/* done: */
- MIPS32_SDBBP, /* sdbbp ; break(); */
+ MIPS32_SDBBP(0), /* sdbbp ; break(); */
};
mips32_info.common_magic = MIPS32_COMMON_MAGIC;
}
break;
default:
- LOG_ERROR("Unsupported bank buswidth %d, can't do block memory writes",
+ LOG_ERROR("Unsupported bank buswidth %u, can't do block memory writes",
bank->bus_width);
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
}
/* convert bus-width dependent algorithm code to correct endianness */
target_code = malloc(target_code_size);
- if (target_code == NULL) {
+ if (!target_code) {
LOG_ERROR("Out of memory");
return ERROR_FAIL;
}
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
}
}
- ;
init_reg_param(®_params[0], "r4", 32, PARAM_OUT);
init_reg_param(®_params[1], "r5", 32, PARAM_OUT);
buf_set_u32(reg_params[2].value, 0, 32, thisrun_count / bank->bus_width);
buf_set_u32(reg_params[3].value, 0, 32, cfi_command_val(bank, 0xA0));
buf_set_u32(reg_params[4].value, 0, 32, cfi_command_val(bank, 0x80));
- buf_set_u32(reg_params[6].value, 0, 32, flash_address(bank, 0, pri_ext->_unlock1));
+ buf_set_u32(reg_params[6].value, 0, 32, cfi_flash_address(bank, 0, pri_ext->_unlock1));
buf_set_u32(reg_params[7].value, 0, 32, 0xaaaaaaaa);
- buf_set_u32(reg_params[8].value, 0, 32, flash_address(bank, 0, pri_ext->_unlock2));
+ buf_set_u32(reg_params[8].value, 0, 32, cfi_flash_address(bank, 0, pri_ext->_unlock2));
buf_set_u32(reg_params[9].value, 0, 32, 0x55555555);
retval = target_run_algorithm(target, 0, NULL, 10, reg_params,
* R10 = unlock2_addr
* R11 = unlock2_cmd */
- /* see contib/loaders/flash/armv4_5_cfi_span_32.s for src */
+ /* see contrib/loaders/flash/armv4_5_cfi_span_32.s for src */
static const uint32_t armv4_5_word_32_code[] = {
/* 00008100 <sp_32_code>: */
0xe4905004, /* ldr r5, [r0], #4 */
0xeafffffe /* b 8154 <sp_32_done> */
};
- /* see contib/loaders/flash/armv4_5_cfi_span_16.s for src */
+ /* see contrib/loaders/flash/armv4_5_cfi_span_16.s for src */
static const uint32_t armv4_5_word_16_code[] = {
/* 00008158 <sp_16_code>: */
0xe0d050b2, /* ldrh r5, [r0], #2 */
target_code_size = sizeof(armv4_5_word_32_code);
break;
default:
- LOG_ERROR("Unsupported bank buswidth %d, can't do block memory writes",
+ LOG_ERROR("Unsupported bank buswidth %u, can't do block memory writes",
bank->bus_width);
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
}
/* convert bus-width dependent algorithm code to correct endianness */
target_code = malloc(target_code_size);
- if (target_code == NULL) {
+ if (!target_code) {
LOG_ERROR("Out of memory");
return ERROR_FAIL;
}
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
}
}
- ;
init_reg_param(®_params[0], "r0", 32, PARAM_OUT);
init_reg_param(®_params[1], "r1", 32, PARAM_OUT);
buf_set_u32(reg_params[2].value, 0, 32, thisrun_count / bank->bus_width);
buf_set_u32(reg_params[3].value, 0, 32, cfi_command_val(bank, 0xA0));
buf_set_u32(reg_params[4].value, 0, 32, cfi_command_val(bank, 0x80));
- buf_set_u32(reg_params[6].value, 0, 32, flash_address(bank, 0, pri_ext->_unlock1));
+ buf_set_u32(reg_params[6].value, 0, 32, cfi_flash_address(bank, 0, pri_ext->_unlock1));
buf_set_u32(reg_params[7].value, 0, 32, 0xaaaaaaaa);
- buf_set_u32(reg_params[8].value, 0, 32, flash_address(bank, 0, pri_ext->_unlock2));
+ buf_set_u32(reg_params[8].value, 0, 32, cfi_flash_address(bank, 0, pri_ext->_unlock2));
buf_set_u32(reg_params[9].value, 0, 32, 0x55555555);
retval = target_run_algorithm(target, 0, NULL, 10, reg_params,
{
int retval;
struct cfi_flash_bank *cfi_info = bank->driver_priv;
- struct target *target = bank->target;
cfi_intel_clear_status_register(bank);
retval = cfi_send_command(bank, 0x40, address);
if (retval != ERROR_OK)
return retval;
- retval = target_write_memory(target, address, bank->bus_width, 1, word);
+ retval = cfi_target_write_memory(bank, address, 1, word);
if (retval != ERROR_OK)
return retval;
if (retval != ERROR_OK)
return retval;
if (status != 0x80) {
- retval = cfi_send_command(bank, 0xff, flash_address(bank, 0, 0x0));
+ retval = cfi_send_command(bank, 0xff, cfi_flash_address(bank, 0, 0x0));
if (retval != ERROR_OK)
return retval;
- LOG_ERROR("couldn't write word at base 0x%" PRIx32 ", address 0x%" PRIx32,
- bank->base, address);
+ LOG_ERROR("couldn't write word at base " TARGET_ADDR_FMT
+ ", address 0x%" PRIx32,
+ bank->base, address);
return ERROR_FLASH_OPERATION_FAILED;
}
{
int retval;
struct cfi_flash_bank *cfi_info = bank->driver_priv;
- struct target *target = bank->target;
/* Calculate buffer size and boundary mask
* buffersize is (buffer size per chip) * (number of chips)
/* Check for valid range */
if (address & buffermask) {
- LOG_ERROR("Write address at base 0x%" PRIx32 ", address 0x%" PRIx32
- " not aligned to 2^%d boundary",
- bank->base, address, cfi_info->max_buf_write_size);
+ LOG_ERROR("Write address at base " TARGET_ADDR_FMT ", address 0x%"
+ PRIx32 " not aligned to 2^%d boundary",
+ bank->base, address, cfi_info->max_buf_write_size);
return ERROR_FLASH_OPERATION_FAILED;
}
/* Check for valid size */
if (wordcount > bufferwsize) {
- LOG_ERROR("Number of data words %" PRId32 " exceeds available buffersize %" PRId32,
+ LOG_ERROR("Number of data words %" PRIu32 " exceeds available buffersize %" PRIu32,
wordcount, buffersize);
return ERROR_FLASH_OPERATION_FAILED;
}
if (retval != ERROR_OK)
return retval;
if (status != 0x80) {
- retval = cfi_send_command(bank, 0xff, flash_address(bank, 0, 0x0));
+ retval = cfi_send_command(bank, 0xff, cfi_flash_address(bank, 0, 0x0));
if (retval != ERROR_OK)
return retval;
LOG_ERROR(
- "couldn't start buffer write operation at base 0x%" PRIx32 ", address 0x%" PRIx32,
+ "couldn't start buffer write operation at base " TARGET_ADDR_FMT
+ ", address 0x%" PRIx32,
bank->base,
address);
return ERROR_FLASH_OPERATION_FAILED;
if (retval != ERROR_OK)
return retval;
- retval = target_write_memory(target, address, bank->bus_width, bufferwsize, word);
+ retval = cfi_target_write_memory(bank, address, bufferwsize, word);
if (retval != ERROR_OK)
return retval;
return retval;
if (status != 0x80) {
- retval = cfi_send_command(bank, 0xff, flash_address(bank, 0, 0x0));
+ retval = cfi_send_command(bank, 0xff, cfi_flash_address(bank, 0, 0x0));
if (retval != ERROR_OK)
return retval;
- LOG_ERROR("Buffer write at base 0x%" PRIx32
+ LOG_ERROR("Buffer write at base " TARGET_ADDR_FMT
", address 0x%" PRIx32 " failed.", bank->base, address);
return ERROR_FLASH_OPERATION_FAILED;
}
int retval;
struct cfi_flash_bank *cfi_info = bank->driver_priv;
struct cfi_spansion_pri_ext *pri_ext = cfi_info->pri_ext;
- struct target *target = bank->target;
-
- retval = cfi_send_command(bank, 0xaa, flash_address(bank, 0, pri_ext->_unlock1));
- if (retval != ERROR_OK)
- return retval;
- retval = cfi_send_command(bank, 0x55, flash_address(bank, 0, pri_ext->_unlock2));
+ retval = cfi_spansion_unlock_seq(bank);
if (retval != ERROR_OK)
return retval;
- retval = cfi_send_command(bank, 0xa0, flash_address(bank, 0, pri_ext->_unlock1));
+ retval = cfi_send_command(bank, 0xa0, cfi_flash_address(bank, 0, pri_ext->_unlock1));
if (retval != ERROR_OK)
return retval;
- retval = target_write_memory(target, address, bank->bus_width, 1, word);
+ retval = cfi_target_write_memory(bank, address, 1, word);
if (retval != ERROR_OK)
return retval;
if (cfi_spansion_wait_status_busy(bank, cfi_info->word_write_timeout) != ERROR_OK) {
- retval = cfi_send_command(bank, 0xf0, flash_address(bank, 0, 0x0));
+ retval = cfi_send_command(bank, 0xf0, cfi_flash_address(bank, 0, 0x0));
if (retval != ERROR_OK)
return retval;
- LOG_ERROR("couldn't write word at base 0x%" PRIx32
+ LOG_ERROR("couldn't write word at base " TARGET_ADDR_FMT
", address 0x%" PRIx32, bank->base, address);
return ERROR_FLASH_OPERATION_FAILED;
}
{
int retval;
struct cfi_flash_bank *cfi_info = bank->driver_priv;
- struct target *target = bank->target;
- struct cfi_spansion_pri_ext *pri_ext = cfi_info->pri_ext;
/* Calculate buffer size and boundary mask
* buffersize is (buffer size per chip) * (number of chips)
/* Check for valid range */
if (address & buffermask) {
- LOG_ERROR("Write address at base 0x%" PRIx32
+ LOG_ERROR("Write address at base " TARGET_ADDR_FMT
", address 0x%" PRIx32 " not aligned to 2^%d boundary",
bank->base, address, cfi_info->max_buf_write_size);
return ERROR_FLASH_OPERATION_FAILED;
/* Check for valid size */
if (wordcount > bufferwsize) {
- LOG_ERROR("Number of data words %" PRId32 " exceeds available buffersize %"
- PRId32, wordcount, buffersize);
+ LOG_ERROR("Number of data words %" PRIu32 " exceeds available buffersize %"
+ PRIu32, wordcount, buffersize);
return ERROR_FLASH_OPERATION_FAILED;
}
/* Unlock */
- retval = cfi_send_command(bank, 0xaa, flash_address(bank, 0, pri_ext->_unlock1));
- if (retval != ERROR_OK)
- return retval;
-
- retval = cfi_send_command(bank, 0x55, flash_address(bank, 0, pri_ext->_unlock2));
+ retval = cfi_spansion_unlock_seq(bank);
if (retval != ERROR_OK)
return retval;
if (retval != ERROR_OK)
return retval;
- retval = target_write_memory(target, address, bank->bus_width, bufferwsize, word);
+ retval = cfi_target_write_memory(bank, address, bufferwsize, word);
if (retval != ERROR_OK)
return retval;
return retval;
if (cfi_spansion_wait_status_busy(bank, cfi_info->buf_write_timeout) != ERROR_OK) {
- retval = cfi_send_command(bank, 0xf0, flash_address(bank, 0, 0x0));
+ retval = cfi_send_command(bank, 0xf0, cfi_flash_address(bank, 0, 0x0));
if (retval != ERROR_OK)
return retval;
- LOG_ERROR("couldn't write block at base 0x%" PRIx32
+ LOG_ERROR("couldn't write block at base " TARGET_ADDR_FMT
", address 0x%" PRIx32 ", size 0x%" PRIx32, bank->base, address,
bufferwsize);
return ERROR_FLASH_OPERATION_FAILED;
return ERROR_OK;
}
-static int cfi_write_word(struct flash_bank *bank, uint8_t *word, uint32_t address)
+int cfi_write_word(struct flash_bank *bank, uint8_t *word, uint32_t address)
{
struct cfi_flash_bank *cfi_info = bank->driver_priv;
case 1:
case 3:
return cfi_intel_write_word(bank, word, address);
- break;
case 2:
return cfi_spansion_write_word(bank, word, address);
- break;
default:
LOG_ERROR("cfi primary command set %i unsupported", cfi_info->pri_id);
break;
case 1:
case 3:
return cfi_intel_write_words(bank, word, wordcount, address);
- break;
case 2:
return cfi_spansion_write_words(bank, word, wordcount, address);
- break;
default:
LOG_ERROR("cfi primary command set %i unsupported", cfi_info->pri_id);
break;
static int cfi_read(struct flash_bank *bank, uint8_t *buffer, uint32_t offset, uint32_t count)
{
struct cfi_flash_bank *cfi_info = bank->driver_priv;
- struct target *target = bank->target;
uint32_t address = bank->base + offset;
uint32_t read_p;
int align; /* number of unaligned bytes */
uint8_t current_word[CFI_MAX_BUS_WIDTH];
- int i;
int retval;
LOG_DEBUG("reading buffer of %i byte at 0x%8.8x",
LOG_INFO("Fixup %d unaligned read head bytes", align);
/* read a complete word from flash */
- retval = target_read_memory(target, read_p, bank->bus_width, 1, current_word);
+ retval = cfi_target_read_memory(bank, read_p, 1, current_word);
if (retval != ERROR_OK)
return retval;
/* take only bytes we need */
- for (i = align; (i < bank->bus_width) && (count > 0); i++, count--)
+ for (unsigned int i = align; (i < bank->bus_width) && (count > 0); i++, count--)
*buffer++ = current_word[i];
read_p += bank->bus_width;
align = count / bank->bus_width;
if (align) {
- retval = target_read_memory(target, read_p, bank->bus_width, align, buffer);
+ retval = cfi_target_read_memory(bank, read_p, align, buffer);
if (retval != ERROR_OK)
return retval;
LOG_INFO("Fixup %" PRIu32 " unaligned read tail bytes", count);
/* read a complete word from flash */
- retval = target_read_memory(target, read_p, bank->bus_width, 1, current_word);
+ retval = cfi_target_read_memory(bank, read_p, 1, current_word);
if (retval != ERROR_OK)
return retval;
/* take only bytes we need */
- for (i = 0; (i < bank->bus_width) && (count > 0); i++, count--)
+ for (unsigned int i = 0; (i < bank->bus_width) && (count > 0); i++, count--)
*buffer++ = current_word[i];
}
static int cfi_write(struct flash_bank *bank, const uint8_t *buffer, uint32_t offset, uint32_t count)
{
struct cfi_flash_bank *cfi_info = bank->driver_priv;
- struct target *target = bank->target;
uint32_t address = bank->base + offset; /* address of first byte to be programmed */
uint32_t write_p;
int align; /* number of unaligned bytes */
int blk_count; /* number of bus_width bytes for block copy */
uint8_t current_word[CFI_MAX_BUS_WIDTH * 4]; /* word (bus_width size) currently being
*programmed */
- int i;
+ uint8_t *swapped_buffer = NULL;
+ const uint8_t *real_buffer = NULL;
int retval;
if (bank->target->state != TARGET_HALTED) {
LOG_INFO("Fixup %d unaligned head bytes", align);
/* read a complete word from flash */
- retval = target_read_memory(target, write_p, bank->bus_width, 1, current_word);
+ retval = cfi_target_read_memory(bank, write_p, 1, current_word);
if (retval != ERROR_OK)
return retval;
/* replace only bytes that must be written */
- for (i = align; (i < bank->bus_width) && (count > 0); i++, count--)
- current_word[i] = *buffer++;
+ for (unsigned int i = align; (i < bank->bus_width) && (count > 0); i++, count--)
+ if (cfi_info->data_swap)
+ /* data bytes are swapped (reverse endianness) */
+ current_word[bank->bus_width - i] = *buffer++;
+ else
+ current_word[i] = *buffer++;
retval = cfi_write_word(bank, current_word, write_p);
if (retval != ERROR_OK)
write_p += bank->bus_width;
}
+ if (cfi_info->data_swap && count) {
+ swapped_buffer = malloc(count & ~(bank->bus_width - 1));
+ switch (bank->bus_width) {
+ case 2:
+ buf_bswap16(swapped_buffer, buffer,
+ count & ~(bank->bus_width - 1));
+ break;
+ case 4:
+ buf_bswap32(swapped_buffer, buffer,
+ count & ~(bank->bus_width - 1));
+ break;
+ }
+ real_buffer = buffer;
+ buffer = swapped_buffer;
+ }
+
/* handle blocks of bus_size aligned bytes */
blk_count = count & ~(bank->bus_width - 1); /* round down, leave tail bytes */
switch (cfi_info->pri_id) {
break;
}
if (retval == ERROR_OK) {
- /* Increment pointers and decrease count on succesful block write */
+ /* Increment pointers and decrease count on successful block write */
buffer += blk_count;
write_p += blk_count;
count -= blk_count;
/* fall back to memory writes */
while (count >= (uint32_t)bank->bus_width) {
- int fallback;
+ bool fallback;
if ((write_p & 0xff) == 0) {
LOG_INFO("Programming at 0x%08" PRIx32 ", count 0x%08"
PRIx32 " bytes remaining", write_p, count);
}
- fallback = 1;
+ fallback = true;
if ((bufferwsize > 0) && (count >= buffersize) &&
!(write_p & buffermask)) {
retval = cfi_write_words(bank, buffer, bufferwsize, write_p);
buffer += buffersize;
write_p += buffersize;
count -= buffersize;
- fallback = 0;
+ fallback = false;
} else if (retval != ERROR_FLASH_OPER_UNSUPPORTED)
return retval;
}
/* try the slow way? */
if (fallback) {
- for (i = 0; i < bank->bus_width; i++)
+ for (unsigned int i = 0; i < bank->bus_width; i++)
current_word[i] = *buffer++;
retval = cfi_write_word(bank, current_word, write_p);
return retval;
}
+ if (swapped_buffer) {
+ buffer = real_buffer + (buffer - swapped_buffer);
+ free(swapped_buffer);
+ }
+
/* return to read array mode, so we can read from flash again for padding */
retval = cfi_reset(bank);
if (retval != ERROR_OK)
/* handle unaligned tail bytes */
if (count > 0) {
- LOG_INFO("Fixup %" PRId32 " unaligned tail bytes", count);
+ LOG_INFO("Fixup %" PRIu32 " unaligned tail bytes", count);
/* read a complete word from flash */
- retval = target_read_memory(target, write_p, bank->bus_width, 1, current_word);
+ retval = cfi_target_read_memory(bank, write_p, 1, current_word);
if (retval != ERROR_OK)
return retval;
/* replace only bytes that must be written */
- for (i = 0; (i < bank->bus_width) && (count > 0); i++, count--)
- current_word[i] = *buffer++;
+ for (unsigned int i = 0; (i < bank->bus_width) && (count > 0); i++, count--)
+ if (cfi_info->data_swap)
+ /* data bytes are swapped (reverse endianness) */
+ current_word[bank->bus_width - i] = *buffer++;
+ else
+ current_word[i] = *buffer++;
retval = cfi_write_word(bank, current_word, write_p);
if (retval != ERROR_OK)
static void cfi_fixup_0002_erase_regions(struct flash_bank *bank, const void *param)
{
- int i;
struct cfi_flash_bank *cfi_info = bank->driver_priv;
struct cfi_spansion_pri_ext *pri_ext = cfi_info->pri_ext;
(void) param;
- if ((pri_ext->_reversed_geometry) || (pri_ext->TopBottom == 3)) {
+ if ((pri_ext->_reversed_geometry) || (pri_ext->top_bottom == 3)) {
LOG_DEBUG("swapping reversed erase region information on cmdset 0002 device");
- for (i = 0; i < cfi_info->num_erase_regions / 2; i++) {
+ for (unsigned int i = 0; i < cfi_info->num_erase_regions / 2; i++) {
int j = (cfi_info->num_erase_regions - 1) - i;
uint32_t swap;
struct cfi_flash_bank *cfi_info = bank->driver_priv;
int retval;
- retval = cfi_send_command(bank, 0x98, flash_address(bank, 0, address));
+ retval = cfi_send_command(bank, 0x98, cfi_flash_address(bank, 0, address));
if (retval != ERROR_OK)
return retval;
return ERROR_OK;
}
-static int cfi_probe(struct flash_bank *bank)
+int cfi_probe(struct flash_bank *bank)
{
struct cfi_flash_bank *cfi_info = bank->driver_priv;
struct target *target = bank->target;
- int num_sectors = 0;
- int i;
+ unsigned int num_sectors = 0;
int sector = 0;
uint32_t unlock1 = 0x555;
uint32_t unlock2 = 0x2aa;
return ERROR_TARGET_NOT_HALTED;
}
- cfi_info->probed = 0;
+ cfi_info->probed = false;
cfi_info->num_erase_regions = 0;
- if (bank->sectors) {
- free(bank->sectors);
- bank->sectors = NULL;
- }
- if (cfi_info->erase_region_info) {
- free(cfi_info->erase_region_info);
- cfi_info->erase_region_info = NULL;
- }
+
+ free(bank->sectors);
+ bank->sectors = NULL;
+
+ free(cfi_info->erase_region_info);
+ cfi_info->erase_region_info = NULL;
/* JEDEC standard JESD21C uses 0x5555 and 0x2aaa as unlock addresses,
* while CFI compatible AMD/Spansion flashes use 0x555 and 0x2aa
}
/* switch to read identifier codes mode ("AUTOSELECT") */
- retval = cfi_send_command(bank, 0xaa, flash_address(bank, 0, unlock1));
+ retval = cfi_send_command(bank, 0xaa, cfi_flash_address(bank, 0, unlock1));
if (retval != ERROR_OK)
return retval;
- retval = cfi_send_command(bank, 0x55, flash_address(bank, 0, unlock2));
+ retval = cfi_send_command(bank, 0x55, cfi_flash_address(bank, 0, unlock2));
if (retval != ERROR_OK)
return retval;
- retval = cfi_send_command(bank, 0x90, flash_address(bank, 0, unlock1));
+ retval = cfi_send_command(bank, 0x90, cfi_flash_address(bank, 0, unlock1));
if (retval != ERROR_OK)
return retval;
- retval = target_read_memory(target, flash_address(bank, 0, 0x00),
- bank->bus_width, 1, value_buf0);
+ retval = cfi_target_read_memory(bank, cfi_flash_address(bank, 0, 0x00),
+ 1, value_buf0);
if (retval != ERROR_OK)
return retval;
- retval = target_read_memory(target, flash_address(bank, 0, 0x01),
- bank->bus_width, 1, value_buf1);
+ retval = cfi_target_read_memory(bank, cfi_flash_address(bank, 0, 0x01),
+ 1, value_buf1);
if (retval != ERROR_OK)
return retval;
switch (bank->chip_width) {
cfi_info->device_id = target_buffer_get_u32(target, value_buf1);
break;
default:
- LOG_ERROR("Unsupported bank chipwidth %d, can't probe memory",
+ LOG_ERROR("Unsupported bank chipwidth %u, can't probe memory",
bank->chip_width);
return ERROR_FLASH_OPERATION_FAILED;
}
/* query only if this is a CFI compatible flash,
* otherwise the relevant info has already been filled in
*/
- if (cfi_info->not_cfi == 0) {
+ if (!cfi_info->not_cfi) {
/* enter CFI query mode
* according to JEDEC Standard No. 68.01,
* a single bus sequence with address = 0x55, data = 0x98 should put
if (cfi_info->num_erase_regions) {
cfi_info->erase_region_info = malloc(sizeof(*cfi_info->erase_region_info)
* cfi_info->num_erase_regions);
- for (i = 0; i < cfi_info->num_erase_regions; i++) {
+ for (unsigned int i = 0; i < cfi_info->num_erase_regions; i++) {
retval = cfi_query_u32(bank,
0,
0x2d + (4 * i),
*for
*all
*CFI
- *flashs
+ *flashes
**/
cfi_read_0002_pri_ext(bank);
break;
} else {
uint32_t offset = 0;
- for (i = 0; i < cfi_info->num_erase_regions; i++)
+ for (unsigned int i = 0; i < cfi_info->num_erase_regions; i++)
num_sectors += (cfi_info->erase_region_info[i] & 0xffff) + 1;
bank->num_sectors = num_sectors;
bank->sectors = malloc(sizeof(struct flash_sector) * num_sectors);
- for (i = 0; i < cfi_info->num_erase_regions; i++) {
- uint32_t j;
- for (j = 0; j < (cfi_info->erase_region_info[i] & 0xffff) + 1; j++) {
+ for (unsigned int i = 0; i < cfi_info->num_erase_regions; i++) {
+ for (uint32_t j = 0; j < (cfi_info->erase_region_info[i] & 0xffff) + 1; j++) {
bank->sectors[sector].offset = offset;
bank->sectors[sector].size =
((cfi_info->erase_region_info[i] >> 16) * 256)
}
if (offset != (cfi_info->dev_size * bank->bus_width / bank->chip_width)) {
LOG_WARNING(
- "CFI size is 0x%" PRIx32 ", but total sector size is 0x%" PRIx32 "", \
+ "CFI size is 0x%" PRIx32 ", but total sector size is 0x%" PRIx32 "",
(cfi_info->dev_size * bank->bus_width / bank->chip_width),
offset);
}
}
- cfi_info->probed = 1;
+ cfi_info->probed = true;
return ERROR_OK;
}
-static int cfi_auto_probe(struct flash_bank *bank)
+int cfi_auto_probe(struct flash_bank *bank)
{
struct cfi_flash_bank *cfi_info = bank->driver_priv;
if (cfi_info->probed)
int retval;
struct cfi_flash_bank *cfi_info = bank->driver_priv;
struct cfi_intel_pri_ext *pri_ext = cfi_info->pri_ext;
- int i;
/* check if block lock bits are supported on this device */
if (!(pri_ext->blk_status_reg_mask & 0x1))
return ERROR_FLASH_OPERATION_FAILED;
- retval = cfi_send_command(bank, 0x90, flash_address(bank, 0, 0x55));
+ retval = cfi_send_command(bank, 0x90, cfi_flash_address(bank, 0, 0x55));
if (retval != ERROR_OK)
return retval;
- for (i = 0; i < bank->num_sectors; i++) {
+ for (unsigned int i = 0; i < bank->num_sectors; i++) {
uint8_t block_status;
retval = cfi_get_u8(bank, i, 0x2, &block_status);
if (retval != ERROR_OK)
bank->sectors[i].is_protected = 0;
}
- return cfi_send_command(bank, 0xff, flash_address(bank, 0, 0x0));
+ return cfi_send_command(bank, 0xff, cfi_flash_address(bank, 0, 0x0));
}
static int cfi_spansion_protect_check(struct flash_bank *bank)
int retval;
struct cfi_flash_bank *cfi_info = bank->driver_priv;
struct cfi_spansion_pri_ext *pri_ext = cfi_info->pri_ext;
- int i;
- retval = cfi_send_command(bank, 0xaa, flash_address(bank, 0, pri_ext->_unlock1));
+ retval = cfi_spansion_unlock_seq(bank);
if (retval != ERROR_OK)
return retval;
- retval = cfi_send_command(bank, 0x55, flash_address(bank, 0, pri_ext->_unlock2));
+ retval = cfi_send_command(bank, 0x90, cfi_flash_address(bank, 0, pri_ext->_unlock1));
if (retval != ERROR_OK)
return retval;
- retval = cfi_send_command(bank, 0x90, flash_address(bank, 0, pri_ext->_unlock1));
- if (retval != ERROR_OK)
- return retval;
-
- for (i = 0; i < bank->num_sectors; i++) {
+ for (unsigned int i = 0; i < bank->num_sectors; i++) {
uint8_t block_status;
retval = cfi_get_u8(bank, i, 0x2, &block_status);
if (retval != ERROR_OK)
bank->sectors[i].is_protected = 0;
}
- return cfi_send_command(bank, 0xf0, flash_address(bank, 0, 0x0));
+ return cfi_send_command(bank, 0xf0, cfi_flash_address(bank, 0, 0x0));
}
-static int cfi_protect_check(struct flash_bank *bank)
+int cfi_protect_check(struct flash_bank *bank)
{
struct cfi_flash_bank *cfi_info = bank->driver_priv;
case 1:
case 3:
return cfi_intel_protect_check(bank);
- break;
case 2:
return cfi_spansion_protect_check(bank);
- break;
default:
LOG_ERROR("cfi primary command set %i unsupported", cfi_info->pri_id);
break;
return ERROR_OK;
}
-static int get_cfi_info(struct flash_bank *bank, char *buf, int buf_size)
+int cfi_get_info(struct flash_bank *bank, struct command_invocation *cmd)
{
- int printed;
struct cfi_flash_bank *cfi_info = bank->driver_priv;
if (cfi_info->qry[0] == 0xff) {
- snprintf(buf, buf_size, "\ncfi flash bank not probed yet\n");
+ command_print_sameline(cmd, "\ncfi flash bank not probed yet\n");
return ERROR_OK;
}
- if (cfi_info->not_cfi == 0)
- printed = snprintf(buf, buf_size, "\nCFI flash: ");
+ if (!cfi_info->not_cfi)
+ command_print_sameline(cmd, "\nCFI flash: ");
else
- printed = snprintf(buf, buf_size, "\nnon-CFI flash: ");
- buf += printed;
- buf_size -= printed;
+ command_print_sameline(cmd, "\nnon-CFI flash: ");
- printed = snprintf(buf, buf_size, "mfr: 0x%4.4x, id:0x%4.4x\n\n",
+ command_print_sameline(cmd, "mfr: 0x%4.4x, id:0x%4.4x\n",
cfi_info->manufacturer, cfi_info->device_id);
- buf += printed;
- buf_size -= printed;
- printed = snprintf(buf, buf_size, "qry: '%c%c%c', pri_id: 0x%4.4x, pri_addr: "
+ command_print_sameline(cmd, "qry: '%c%c%c', pri_id: 0x%4.4x, pri_addr: "
"0x%4.4x, alt_id: 0x%4.4x, alt_addr: 0x%4.4x\n",
cfi_info->qry[0], cfi_info->qry[1], cfi_info->qry[2],
cfi_info->pri_id, cfi_info->pri_addr, cfi_info->alt_id, cfi_info->alt_addr);
- buf += printed;
- buf_size -= printed;
- printed = snprintf(buf, buf_size, "Vcc min: %x.%x, Vcc max: %x.%x, "
+ command_print_sameline(cmd, "Vcc min: %x.%x, Vcc max: %x.%x, "
"Vpp min: %u.%x, Vpp max: %u.%x\n",
(cfi_info->vcc_min & 0xf0) >> 4, cfi_info->vcc_min & 0x0f,
(cfi_info->vcc_max & 0xf0) >> 4, cfi_info->vcc_max & 0x0f,
(cfi_info->vpp_min & 0xf0) >> 4, cfi_info->vpp_min & 0x0f,
(cfi_info->vpp_max & 0xf0) >> 4, cfi_info->vpp_max & 0x0f);
- buf += printed;
- buf_size -= printed;
- printed = snprintf(buf, buf_size, "typ. word write timeout: %u us, "
+ command_print_sameline(cmd, "typ. word write timeout: %u us, "
"typ. buf write timeout: %u us, "
"typ. block erase timeout: %u ms, "
"typ. chip erase timeout: %u ms\n",
1 << cfi_info->buf_write_timeout_typ,
1 << cfi_info->block_erase_timeout_typ,
1 << cfi_info->chip_erase_timeout_typ);
- buf += printed;
- buf_size -= printed;
- printed = snprintf(buf,
- buf_size,
- "max. word write timeout: %u us, "
+ command_print_sameline(cmd, "max. word write timeout: %u us, "
"max. buf write timeout: %u us, max. "
"block erase timeout: %u ms, max. chip erase timeout: %u ms\n",
(1 <<
(1 <<
cfi_info->chip_erase_timeout_max) *
(1 << cfi_info->chip_erase_timeout_typ));
- buf += printed;
- buf_size -= printed;
- printed = snprintf(buf, buf_size, "size: 0x%" PRIx32 ", interface desc: %i, "
+ command_print_sameline(cmd, "size: 0x%" PRIx32 ", interface desc: %i, "
"max buffer write size: 0x%x\n",
cfi_info->dev_size,
cfi_info->interface_desc,
1 << cfi_info->max_buf_write_size);
- buf += printed;
- buf_size -= printed;
switch (cfi_info->pri_id) {
case 1:
case 3:
- cfi_intel_info(bank, buf, buf_size);
+ cfi_intel_info(bank, cmd);
break;
case 2:
- cfi_spansion_info(bank, buf, buf_size);
+ cfi_spansion_info(bank, cmd);
break;
default:
LOG_ERROR("cfi primary command set %i unsupported", cfi_info->pri_id);
cfi_info->buf_write_timeout_typ = 0;
}
-struct flash_driver cfi_flash = {
+const struct flash_driver cfi_flash = {
.name = "cfi",
.flash_bank_command = cfi_flash_bank_command,
.erase = cfi_erase,
/* FIXME: access flash at bus_width size */
.erase_check = default_flash_blank_check,
.protect_check = cfi_protect_check,
- .info = get_cfi_info,
+ .info = cfi_get_info,
+ .free_driver_priv = default_flash_free_driver_priv,
};
projects / fw / openocd / blobdiff