#include "imp.h"
#include "cc3220sf.h"
+#include <helper/binarybuffer.h>
#include <helper/time_support.h>
#include <target/algorithm.h>
#include <target/armv7m.h>
int retval = ERROR_OK;
- if (TARGET_HALTED != target->state) {
+ if (target->state != TARGET_HALTED) {
LOG_ERROR("Target not halted");
return ERROR_TARGET_NOT_HALTED;
}
/* Set starting address to erase to zero */
retval = target_write_u32(target, FMA_REGISTER_ADDR, 0);
- if (ERROR_OK != retval)
+ if (retval != ERROR_OK)
return retval;
/* Write the MERASE bit of the FMC register */
retval = target_write_u32(target, FMC_REGISTER_ADDR, FMC_MERASE_VALUE);
- if (ERROR_OK != retval)
+ if (retval != ERROR_OK)
return retval;
/* Poll the MERASE bit until the mass erase is complete */
start_ms = timeval_ms();
while (!done) {
retval = target_read_u32(target, FMC_REGISTER_ADDR, &value);
- if (ERROR_OK != retval)
+ if (retval != ERROR_OK)
return retval;
if ((value & FMC_MERASE_BIT) == 0) {
return ERROR_COMMAND_SYNTAX_ERROR;
cc3220sf_bank = malloc(sizeof(struct cc3220sf_bank));
- if (NULL == cc3220sf_bank)
+ if (!cc3220sf_bank)
return ERROR_FAIL;
/* Initialize private flash information */
int retval = ERROR_OK;
- if (TARGET_HALTED != target->state) {
+ if (target->state != TARGET_HALTED) {
LOG_ERROR("Target not halted");
return ERROR_TARGET_NOT_HALTED;
}
/* Set starting address to erase */
retval = target_write_u32(target, FMA_REGISTER_ADDR, address);
- if (ERROR_OK != retval)
+ if (retval != ERROR_OK)
return retval;
/* Write the ERASE bit of the FMC register */
retval = target_write_u32(target, FMC_REGISTER_ADDR, FMC_ERASE_VALUE);
- if (ERROR_OK != retval)
+ if (retval != ERROR_OK)
return retval;
/* Poll the ERASE bit until the erase is complete */
start_ms = timeval_ms();
while (!done) {
retval = target_read_u32(target, FMC_REGISTER_ADDR, &value);
- if (ERROR_OK != retval)
+ if (retval != ERROR_OK)
return retval;
if ((value & FMC_ERASE_BIT) == 0) {
int retval = ERROR_OK;
- if (TARGET_HALTED != target->state) {
+ if (target->state != TARGET_HALTED) {
LOG_ERROR("Target not halted");
return ERROR_TARGET_NOT_HALTED;
}
/* Obtain working area to use for flash helper algorithm */
retval = target_alloc_working_area(target, sizeof(cc3220sf_algo),
&algo_working_area);
- if (ERROR_OK != retval)
+ if (retval != ERROR_OK)
return retval;
/* Obtain working area to use for flash buffer */
retval = target_alloc_working_area(target,
target_get_working_area_avail(target), &buffer_working_area);
- if (ERROR_OK != retval) {
+ if (retval != ERROR_OK) {
target_free_working_area(target, algo_working_area);
return retval;
}
/* Write flash helper algorithm into target memory */
retval = target_write_buffer(target, algo_base_address,
sizeof(cc3220sf_algo), cc3220sf_algo);
- if (ERROR_OK != retval) {
+ if (retval != ERROR_OK) {
target_free_working_area(target, algo_working_area);
target_free_working_area(target, buffer_working_area);
return retval;
/* Retrieve what is already in flash at the head address */
retval = target_read_buffer(target, head_address, sizeof(head), head);
- if (ERROR_OK == retval) {
+ if (retval == ERROR_OK) {
/* Substitute in the new data to write */
while ((remaining > 0) && (head_offset < 4)) {
head[head_offset] = *buffer;
}
}
- if (ERROR_OK == retval) {
+ if (retval == ERROR_OK) {
/* Helper parameters are passed in registers R0-R2 */
/* Set start of data buffer, address to write to, and word count */
buf_set_u32(reg_params[0].value, 0, 32, algo_buffer_address);
sizeof(head), head);
}
- if (ERROR_OK == retval) {
+ if (retval == ERROR_OK) {
/* Execute the flash helper algorithm */
retval = target_run_algorithm(target, 0, NULL, 3, reg_params,
algo_base_address, 0, FLASH_TIMEOUT,
&cc3220sf_bank->armv7m_info);
- if (ERROR_OK != retval)
+ if (retval != ERROR_OK)
LOG_ERROR("cc3220sf: Flash algorithm failed to run");
/* Check that the head value was written to flash */
result = buf_get_u32(reg_params[2].value, 0, 32);
- if (0 != result) {
+ if (result != 0) {
retval = ERROR_FAIL;
LOG_ERROR("cc3220sf: Flash operation failed");
}
/* Adjust remaining so it is a multiple of whole words */
remaining -= tail_count;
- while ((ERROR_OK == retval) && (remaining > 0)) {
+ while ((retval == ERROR_OK) && (remaining > 0)) {
/* Set start of data buffer and address to write to */
buf_set_u32(reg_params[0].value, 0, 32, algo_buffer_address);
buf_set_u32(reg_params[1].value, 0, 32, address);
/* Fill up buffer with data to flash */
retval = target_write_buffer(target, algo_buffer_address,
algo_buffer_size, buffer);
- if (ERROR_OK != retval)
+ if (retval != ERROR_OK)
break;
/* Count to write is in 32-bit words */
/* Fill buffer with what's left of the data */
retval = target_write_buffer(target, algo_buffer_address,
remaining, buffer);
- if (ERROR_OK != retval)
+ if (retval != ERROR_OK)
break;
/* Calculate the final word count to write */
retval = target_run_algorithm(target, 0, NULL, 3, reg_params,
algo_base_address, 0, FLASH_TIMEOUT,
&cc3220sf_bank->armv7m_info);
- if (ERROR_OK != retval) {
+ if (retval != ERROR_OK) {
LOG_ERROR("cc3220sf: Flash algorithm failed to run");
break;
}
/* Check that all words were written to flash */
result = buf_get_u32(reg_params[2].value, 0, 32);
- if (0 != result) {
+ if (result != 0) {
retval = ERROR_FAIL;
LOG_ERROR("cc3220sf: Flash operation failed");
break;
}
/* Do one word write for any final bytes less than a full word */
- if ((ERROR_OK == retval) && (0 != tail_count)) {
+ if ((retval == ERROR_OK) && (tail_count != 0)) {
uint8_t tail[4];
/* Set starting byte offset for data to write */
/* Retrieve what is already in flash at the tail address */
retval = target_read_buffer(target, address, sizeof(tail), tail);
- if (ERROR_OK == retval) {
+ if (retval == ERROR_OK) {
/* Substitute in the new data to write */
while (tail_count > 0) {
tail[tail_offset] = *buffer;
}
}
- if (ERROR_OK == retval) {
+ if (retval == ERROR_OK) {
/* Set start of data buffer, address to write to, and word count */
buf_set_u32(reg_params[0].value, 0, 32, algo_buffer_address);
buf_set_u32(reg_params[1].value, 0, 32, address);
sizeof(tail), tail);
}
- if (ERROR_OK == retval) {
+ if (retval == ERROR_OK) {
/* Execute the flash helper algorithm */
retval = target_run_algorithm(target, 0, NULL, 3, reg_params,
algo_base_address, 0, FLASH_TIMEOUT,
&cc3220sf_bank->armv7m_info);
- if (ERROR_OK != retval)
+ if (retval != ERROR_OK)
LOG_ERROR("cc3220sf: Flash algorithm failed to run");
/* Check that the tail was written to flash */
result = buf_get_u32(reg_params[2].value, 0, 32);
- if (0 != result) {
+ if (result != 0) {
retval = ERROR_FAIL;
LOG_ERROR("cc3220sf: Flash operation failed");
}
size = FLASH_NUM_SECTORS * FLASH_SECTOR_SIZE;
num_sectors = FLASH_NUM_SECTORS;
- if (NULL != bank->sectors) {
- free(bank->sectors);
- bank->sectors = NULL;
- }
+ free(bank->sectors);
bank->sectors = malloc(sizeof(struct flash_sector) * num_sectors);
- if (NULL == bank->sectors)
+ if (!bank->sectors)
return ERROR_FAIL;
bank->base = base;
return retval;
}
-static int cc3220sf_info(struct flash_bank *bank, char *buf, int buf_size)
+static int cc3220sf_info(struct flash_bank *bank, struct command_invocation *cmd)
{
- int printed;
-
- printed = snprintf(buf, buf_size, "CC3220SF with 1MB internal flash\n");
-
- if (printed >= buf_size)
- return ERROR_BUF_TOO_SMALL;
-
+ command_print_sameline(cmd, "CC3220SF with 1MB internal flash\n");
return ERROR_OK;
}
projects / fw / openocd / blobdiff