AT91SAM4L: handle reset run/halt in SMAP

[fw/openocd] / src / flash / nor / at91sam4l.c

diff --git a/src/flash/nor/at91sam4l.c b/src/flash/nor/at91sam4l.c
index a5eb67271494c57c08047206689b44e36e3e2c50..74d5dbc6812a93dc0cd8a7f2eef5b4b457159e84 100644 (file)
--- a/src/flash/nor/at91sam4l.c
+++ b/src/flash/nor/at91sam4l.c
@@ -24,13 +24,15 @@
 
 #include "imp.h"
 
+#include <target/cortex_m.h>
+
 /* At this time, the SAM4L Flash is available in these capacities:
  * ATSAM4Lx4xx: 256KB (512 pages)
  * ATSAM4Lx2xx: 128KB (256 pages)
  * ATSAM4Lx8xx: 512KB (1024 pages)
  */
 
-/* There are 16 lockable regions regardless of overall capacity.       The number
+/* There are 16 lockable regions regardless of overall capacity. The number
  * of pages per sector is therefore dependant on capacity. */
 #define SAM4L_NUM_SECTORS 16
 
@@ -75,6 +77,14 @@
 
 #define SAM4L_FMCD_CMDKEY      0xA5UL  /* 'key' to issue commands, see 14.10.2 */
 
+
+/* SMAP registers and bits */
+#define SMAP_BASE 0x400A3000
+
+#define SMAP_SCR (SMAP_BASE + 8)
+#define SMAP_SCR_HCR (1 << 1)
+
+
 struct sam4l_chip_info {
        uint32_t id;
        uint32_t exid;
@@ -633,21 +643,47 @@ static int sam4l_write(struct flash_bank *bank, const uint8_t *buffer,
        return ERROR_OK;
 }
 
-COMMAND_HANDLER(sam4l_handle_info_command)
+
+COMMAND_HANDLER(sam4l_handle_reset_deassert)
 {
-       return ERROR_OK;
+       struct target *target = get_current_target(CMD_CTX);
+       struct armv7m_common *armv7m = target_to_armv7m(target);
+       struct adiv5_dap *swjdp = armv7m->arm.dap;
+       int retval = ERROR_OK;
+       enum reset_types jtag_reset_config = jtag_get_reset_config();
+
+       /* In case of sysresetreq, debug retains state set in cortex_m_assert_reset()
+        * so we just release reset held by SMAP
+        *
+        * n_RESET (srst) clears the DP, so reenable debug and set vector catch here
+        *
+        * After vectreset SMAP release is not needed however makes no harm
+        */
+       if (target->reset_halt && (jtag_reset_config & RESET_HAS_SRST)) {
+               retval = mem_ap_write_u32(swjdp, DCB_DHCSR, DBGKEY | C_HALT | C_DEBUGEN);
+               if (retval == ERROR_OK)
+                       retval = mem_ap_write_atomic_u32(swjdp, DCB_DEMCR,
+                               TRCENA | VC_HARDERR | VC_BUSERR | VC_CORERESET);
+               /* do not return on error here, releasing SMAP reset is more important */
+       }
+
+       int retval2 = mem_ap_write_atomic_u32(swjdp, SMAP_SCR, SMAP_SCR_HCR);
+       if (retval2 != ERROR_OK)
+               return retval2;
+
+       return retval;
 }
 
 static const struct command_registration at91sam4l_exec_command_handlers[] = {
        {
-               .name = "info",
-               .handler = sam4l_handle_info_command,
+               .name = "smap_reset_deassert",
+               .handler = sam4l_handle_reset_deassert,
                .mode = COMMAND_EXEC,
-               .help = "Print information about the current at91sam4l chip"
-                       "and its flash configuration.",
+               .help = "deasert internal reset held by SMAP"
        },
        COMMAND_REGISTRATION_DONE
 };
+
 static const struct command_registration at91sam4l_command_handlers[] = {
        {
                .name = "at91sam4l",