* Copyright (C) 2011 by Olivier Schonken (at91sam3x* support) * *
* and Jim Norris *
* This program is free software; you can redistribute it and/or modify *
- * it under the terms of the GNU General public License as published by *
+ * it under the terms of the GNU General Public License as published by *
* the Free Software Foundation; either version 2 of the License, or *
* (at your option) any later version. *
* *
* This program is distributed in the hope that it will be useful, *
* but WITHOUT ANY WARRANTY; without even the implied warranty of *
- * MERCHANTABILITY or FITNESS for A PARTICULAR PURPOSE. See the *
- * GNU General public License for more details. *
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
+ * GNU General Public License for more details. *
* *
- * You should have received a copy of the GNU General public License *
- * along with this program; if not, write to the *
- * Free Software Foundation, Inc., *
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
+ * You should have received a copy of the GNU General Public License *
+ * along with this program. If not, see <http://www.gnu.org/licenses/>. *
****************************************************************************/
/* Some of the the lower level code was based on code supplied by
/* at91sam3s series (has always one flash bank) */
#define FLASH_BANK_BASE_S 0x00400000
+/* at91sam3sd series (has always two flash banks) */
+#define FLASH_BANK0_BASE_SD FLASH_BANK_BASE_S
+#define FLASH_BANK1_BASE_512K_SD (FLASH_BANK0_BASE_SD+(512*1024/2))
+
+
/* at91sam3n series (has always one flash bank) */
#define FLASH_BANK_BASE_N 0x00400000
#define FLASH_BANK1_BASE_256K_AX 0x000A0000
#define FLASH_BANK1_BASE_512K_AX 0x000C0000
-#define FLASH_BANK0_BASE_SD FLASH_BANK_BASE_S
-#define FLASH_BANK1_BASE_512K_SD (FLASH_BANK0_BASE_SD+(512*1024/2))
-
#define AT91C_EFC_FCMD_GETD (0x0) /* (EFC) Get Flash Descriptor */
#define AT91C_EFC_FCMD_WP (0x1) /* (EFC) Write Page */
#define AT91C_EFC_FCMD_WPL (0x2) /* (EFC) Write Page and Lock */
#define AT91C_EFC_FCMD_EWP (0x3) /* (EFC) Erase Page and Write Page */
-#define AT91C_EFC_FCMD_EWPL (0x4) /* (EFC) Erase Page and Write Page
- * then Lock */
+#define AT91C_EFC_FCMD_EWPL (0x4) /* (EFC) Erase Page and Write Page then Lock */
#define AT91C_EFC_FCMD_EA (0x5) /* (EFC) Erase All */
-/* cmd6 is not present int he at91sam3u4/2/1 data sheet table 17-2 */
+/* cmd6 is not present in the at91sam3u4/2/1 data sheet table 17-2 */
/* #define AT91C_EFC_FCMD_EPL (0x6) // (EFC) Erase plane? */
-/* cmd7 is not present int he at91sam3u4/2/1 data sheet table 17-2 */
+/* cmd7 is not present in the at91sam3u4/2/1 data sheet table 17-2 */
/* #define AT91C_EFC_FCMD_EPA (0x7) // (EFC) Erase pages? */
#define AT91C_EFC_FCMD_SLB (0x8) /* (EFC) Set Lock Bit */
#define AT91C_EFC_FCMD_CLB (0x9) /* (EFC) Clear Lock Bit */
#define offset_EFC_FSR 8
#define offset_EFC_FRR 12
-extern struct flash_driver at91sam3_flash;
+extern const struct flash_driver at91sam3_flash;
static float _tomhz(uint32_t freq_hz)
{
/* so we can find the chip we belong to */
struct sam3_chip *pChip;
- /* so we can find the orginal bank pointer */
+ /* so we can find the original bank pointer */
struct flash_bank *pBank;
unsigned bank_number;
uint32_t controller_address;
struct sam3_chip_details {
/* THERE ARE DRAGONS HERE.. */
/* note: If you add pointers here */
- /* becareful about them as they */
+ /* be careful about them as they */
/* may need to be updated inside */
/* the function: "sam3_GetDetails() */
/* which copy/overwrites the */
static struct sam3_chip *all_sam3_chips;
-static struct sam3_chip *get_current_sam3(struct command_context *cmd_ctx)
+static struct sam3_chip *get_current_sam3(struct command_invocation *cmd)
{
struct target *t;
static struct sam3_chip *p;
- t = get_current_target(cmd_ctx);
+ t = get_current_target(cmd->ctx);
if (!t) {
- command_print(cmd_ctx, "No current target?");
+ command_print(cmd, "No current target?");
return NULL;
}
if (!p) {
/* this should not happen */
/* the command is not registered until the chip is created? */
- command_print(cmd_ctx, "No SAM3 chips exist?");
+ command_print(cmd, "No SAM3 chips exist?");
return NULL;
}
return p;
p = p->next;
}
- command_print(cmd_ctx, "Cannot find SAM3 chip?");
+ command_print(cmd, "Cannot find SAM3 chip?");
return NULL;
}
/* Note: The preliminary at91sam3s datasheet says on page 302 */
/* that the flash controller is at address 0x400E0800. */
- /* This is _not_ the case, the controller resides at address 0x400e0a0. */
+ /* This is _not_ the case, the controller resides at address 0x400e0a00. */
{
.chipid_cidr = 0x28A00960,
.name = "at91sam3s4c",
},
},
},
+ {
+ .chipid_cidr = 0x298B0A60,
+ .name = "at91sam3sd8a",
+ .total_flash_size = 512 * 1024,
+ .total_sram_size = 64 * 1024,
+ .n_gpnvms = 3,
+ .n_banks = 2,
+ {
+/* .bank[0] = { */
+ {
+ .probed = 0,
+ .pChip = NULL,
+ .pBank = NULL,
+ .bank_number = 0,
+ .base_address = FLASH_BANK0_BASE_SD,
+ .controller_address = 0x400e0a00,
+ .flash_wait_states = 6, /* workaround silicon bug */
+ .present = 1,
+ .size_bytes = 256 * 1024,
+ .nsectors = 16,
+ .sector_size = 32768,
+ .page_size = 256,
+ },
+/* .bank[1] = { */
+ {
+ .probed = 0,
+ .pChip = NULL,
+ .pBank = NULL,
+ .bank_number = 1,
+ .base_address = FLASH_BANK1_BASE_512K_SD,
+ .controller_address = 0x400e0a00,
+ .flash_wait_states = 6, /* workaround silicon bug */
+ .present = 1,
+ .size_bytes = 256 * 1024,
+ .nsectors = 16,
+ .sector_size = 32768,
+ .page_size = 256,
+ },
+ },
+ },
+ {
+ .chipid_cidr = 0x299B0A60,
+ .name = "at91sam3sd8b",
+ .total_flash_size = 512 * 1024,
+ .total_sram_size = 64 * 1024,
+ .n_gpnvms = 3,
+ .n_banks = 2,
+ {
+/* .bank[0] = { */
+ {
+ .probed = 0,
+ .pChip = NULL,
+ .pBank = NULL,
+ .bank_number = 0,
+ .base_address = FLASH_BANK0_BASE_SD,
+ .controller_address = 0x400e0a00,
+ .flash_wait_states = 6, /* workaround silicon bug */
+ .present = 1,
+ .size_bytes = 256 * 1024,
+ .nsectors = 16,
+ .sector_size = 32768,
+ .page_size = 256,
+ },
+/* .bank[1] = { */
+ {
+ .probed = 0,
+ .pChip = NULL,
+ .pBank = NULL,
+ .bank_number = 1,
+ .base_address = FLASH_BANK1_BASE_512K_SD,
+ .controller_address = 0x400e0a00,
+ .flash_wait_states = 6, /* workaround silicon bug */
+ .present = 1,
+ .size_bytes = 256 * 1024,
+ .nsectors = 16,
+ .sector_size = 32768,
+ .page_size = 256,
+ },
+ },
+ },
{
.chipid_cidr = 0x29ab0a60,
.name = "at91sam3sd8c",
.present = 1,
.size_bytes = 256 * 1024,
.nsectors = 16,
- .sector_size = 16384,
+ .sector_size = 32768,
.page_size = 256,
},
/* .bank[1] = { */
.present = 1,
.size_bytes = 256 * 1024,
.nsectors = 16,
- .sector_size = 16384,
+ .sector_size = 32768,
.page_size = 256,
},
},
},
},
},
+ {
+ .chipid_cidr = 0x288B0A60,
+ .name = "at91sam3s8a",
+ .total_flash_size = 256 * 2048,
+ .total_sram_size = 64 * 1024,
+ .n_gpnvms = 2,
+ .n_banks = 1,
+ {
+/* .bank[0] = { */
+ {
+ .probed = 0,
+ .pChip = NULL,
+ .pBank = NULL,
+ .bank_number = 0,
+ .base_address = FLASH_BANK_BASE_S,
+ .controller_address = 0x400e0a00,
+ .flash_wait_states = 6, /* workaround silicon bug */
+ .present = 1,
+ .size_bytes = 256 * 2048,
+ .nsectors = 16,
+ .sector_size = 32768,
+ .page_size = 256,
+ },
+/* .bank[1] = { */
+ {
+ .present = 0,
+ .probed = 0,
+ .bank_number = 1,
+
+ },
+ },
+ },
+ {
+ .chipid_cidr = 0x289B0A60,
+ .name = "at91sam3s8b",
+ .total_flash_size = 256 * 2048,
+ .total_sram_size = 64 * 1024,
+ .n_gpnvms = 2,
+ .n_banks = 1,
+ {
+/* .bank[0] = { */
+ {
+ .probed = 0,
+ .pChip = NULL,
+ .pBank = NULL,
+ .bank_number = 0,
+ .base_address = FLASH_BANK_BASE_S,
+ .controller_address = 0x400e0a00,
+ .flash_wait_states = 6, /* workaround silicon bug */
+ .present = 1,
+ .size_bytes = 256 * 2048,
+ .nsectors = 16,
+ .sector_size = 32768,
+ .page_size = 256,
+ },
+/* .bank[1] = { */
+ {
+ .present = 0,
+ .probed = 0,
+ .bank_number = 1,
+
+ },
+ },
+ },
+ {
+ .chipid_cidr = 0x28AB0A60,
+ .name = "at91sam3s8c",
+ .total_flash_size = 256 * 2048,
+ .total_sram_size = 64 * 1024,
+ .n_gpnvms = 2,
+ .n_banks = 1,
+ {
+/* .bank[0] = { */
+ {
+ .probed = 0,
+ .pChip = NULL,
+ .pBank = NULL,
+ .bank_number = 0,
+ .base_address = FLASH_BANK_BASE_S,
+ .controller_address = 0x400e0a00,
+ .flash_wait_states = 6, /* workaround silicon bug */
+ .present = 1,
+ .size_bytes = 256 * 2048,
+ .nsectors = 16,
+ .sector_size = 32768,
+ .page_size = 256,
+ },
+/* .bank[1] = { */
+ {
+ .present = 0,
+ .probed = 0,
+ .bank_number = 1,
+
+ },
+ },
+ },
/* Start at91sam3n* series */
{
},
},
+ {
+ .chipid_cidr = 0x29480360,
+ .name = "at91sam3n0b",
+ .total_flash_size = 32 * 1024,
+ .total_sram_size = 8 * 1024,
+ .n_gpnvms = 3,
+ .n_banks = 1,
+
+/* .bank[0] = { */
+ {
+ {
+ .probed = 0,
+ .pChip = NULL,
+ .pBank = NULL,
+ .bank_number = 0,
+ .base_address = FLASH_BANK_BASE_N,
+ .controller_address = 0x400e0A00,
+ .flash_wait_states = 6, /* workaround silicon bug */
+ .present = 1,
+ .size_bytes = 32 * 1024,
+ .nsectors = 2,
+ .sector_size = 16384,
+ .page_size = 256,
+ },
+
+/* .bank[1] = { */
+ {
+ .present = 0,
+ .probed = 0,
+ .bank_number = 1,
+ },
+ },
+ },
+
+ {
+ .chipid_cidr = 0x29380360,
+ .name = "at91sam3n0a",
+ .total_flash_size = 32 * 1024,
+ .total_sram_size = 8 * 1024,
+ .n_gpnvms = 3,
+ .n_banks = 1,
+
+/* .bank[0] = { */
+ {
+ {
+ .probed = 0,
+ .pChip = NULL,
+ .pBank = NULL,
+ .bank_number = 0,
+ .base_address = FLASH_BANK_BASE_N,
+ .controller_address = 0x400e0A00,
+ .flash_wait_states = 6, /* workaround silicon bug */
+ .present = 1,
+ .size_bytes = 32 * 1024,
+ .nsectors = 2,
+ .sector_size = 16384,
+ .page_size = 256,
+ },
+
+/* .bank[1] = { */
+ {
+ .present = 0,
+ .probed = 0,
+ .bank_number = 1,
+ },
+ },
+ },
+
+ {
+ .chipid_cidr = 0x29450260,
+ .name = "at91sam3n00b",
+ .total_flash_size = 16 * 1024,
+ .total_sram_size = 4 * 1024,
+ .n_gpnvms = 3,
+ .n_banks = 1,
+
+/* .bank[0] = { */
+ {
+ {
+ .probed = 0,
+ .pChip = NULL,
+ .pBank = NULL,
+ .bank_number = 0,
+ .base_address = FLASH_BANK_BASE_N,
+ .controller_address = 0x400e0A00,
+ .flash_wait_states = 6, /* workaround silicon bug */
+ .present = 1,
+ .size_bytes = 16 * 1024,
+ .nsectors = 1,
+ .sector_size = 16384,
+ .page_size = 256,
+ },
+
+/* .bank[1] = { */
+ {
+ .present = 0,
+ .probed = 0,
+ .bank_number = 1,
+ },
+ },
+ },
+
+ {
+ .chipid_cidr = 0x29350260,
+ .name = "at91sam3n00a",
+ .total_flash_size = 16 * 1024,
+ .total_sram_size = 4 * 1024,
+ .n_gpnvms = 3,
+ .n_banks = 1,
+
+/* .bank[0] = { */
+ {
+ {
+ .probed = 0,
+ .pChip = NULL,
+ .pBank = NULL,
+ .bank_number = 0,
+ .base_address = FLASH_BANK_BASE_N,
+ .controller_address = 0x400e0A00,
+ .flash_wait_states = 6, /* workaround silicon bug */
+ .present = 1,
+ .size_bytes = 16 * 1024,
+ .nsectors = 1,
+ .sector_size = 16384,
+ .page_size = 256,
+ },
+
+/* .bank[1] = { */
+ {
+ .present = 0,
+ .probed = 0,
+ .bank_number = 1,
+ },
+ },
+ },
+
+
/* Start at91sam3a series*/
/* System boots at address 0x0 */
/* gpnvm[1] = selects boot code */
int r;
uint32_t v;
- long long ms_now, ms_end;
+ int64_t ms_now, ms_end;
/* default */
if (status)
}
/* show the basics */
- LOG_USER_N("\t%*s: %*d [0x%0*x] ",
+ LOG_USER_N("\t%*s: %*" PRIu32 " [0x%0*" PRIx32 "] ",
REG_NAME_WIDTH, regname,
dwidth, v,
hwidth, v);
_unknown, /* 0 */
"arm946es", /* 1 */
"arm7tdmi", /* 2 */
- "cortex-m3", /* 3 */
+ "Cortex-M3", /* 3 */
"arm920t", /* 4 */
"arm926ejs", /* 5 */
_unknown, /* 6 */
v = (v * pChip->cfg.slow_freq) / 16;
pChip->cfg.mainosc_freq = v;
- LOG_USER("(%3.03f Mhz (%d.%03dkhz slowclk)",
+ LOG_USER("(%3.03f Mhz (%" PRIu32 ".%03" PRIu32 "khz slowclk)",
_tomhz(v),
- pChip->cfg.slow_freq / 1000,
- pChip->cfg.slow_freq % 1000);
+ (uint32_t)(pChip->cfg.slow_freq / 1000),
+ (uint32_t)(pChip->cfg.slow_freq % 1000));
}
static void sam3_explain_ckgr_plla(struct sam3_chip *pChip)
LOG_USER("\tPLLA Freq: (Disabled,mula = 0)");
else if (diva == 0)
LOG_USER("\tPLLA Freq: (Disabled,diva = 0)");
- else if (diva == 1) {
- pChip->cfg.plla_freq = (pChip->cfg.mainosc_freq * (mula + 1));
+ else if (diva >= 1) {
+ pChip->cfg.plla_freq = (pChip->cfg.mainosc_freq * (mula + 1) / diva);
LOG_USER("\tPLLA Freq: %3.03f MHz",
_tomhz(pChip->cfg.plla_freq));
}
static struct sam3_bank_private *get_sam3_bank_private(struct flash_bank *bank)
{
- return (struct sam3_bank_private *)(bank->driver_priv);
+ return bank->driver_priv;
}
/**
r = sam3_ReadThisReg(pChip,
sam3_get_reg_ptr(&(pChip->cfg), pReg));
if (r != ERROR_OK) {
- LOG_ERROR("Cannot read SAM3 registere: %s @ 0x%08x, Error: %d",
+ LOG_ERROR("Cannot read SAM3 register: %s @ 0x%08x, Error: %d",
pReg->name, ((unsigned)(pReg->address)), r);
return r;
}
/* display all regs */
LOG_DEBUG("Start: %s", pReg->name);
regval = *sam3_get_reg_ptr(&(pChip->cfg), pReg);
- LOG_USER("%*s: [0x%08x] -> 0x%08x",
+ LOG_USER("%*s: [0x%08" PRIx32 "] -> 0x%08" PRIx32,
REG_NAME_WIDTH,
pReg->name,
pReg->address,
LOG_USER(" cpu-freq: %3.03f MHz", _tomhz(pChip->cfg.cpu_freq));
LOG_USER("mclk-freq: %3.03f MHz", _tomhz(pChip->cfg.mclk_freq));
- LOG_USER(" UniqueId: 0x%08x 0x%08x 0x%08x 0x%08x",
+ LOG_USER(" UniqueId: 0x%08" PRIx32 " 0x%08" PRIx32 " 0x%08" PRIx32 " 0x%08" PRIx32,
pChip->cfg.unique_id[0],
pChip->cfg.unique_id[1],
pChip->cfg.unique_id[2],
return ERROR_OK;
}
-static int sam3_erase_check(struct flash_bank *bank)
-{
- int x;
-
- LOG_DEBUG("Here");
- if (bank->target->state != TARGET_HALTED) {
- LOG_ERROR("Target not halted");
- return ERROR_TARGET_NOT_HALTED;
- }
- if (0 == bank->num_sectors) {
- LOG_ERROR("Target: not supported/not probed");
- return ERROR_FAIL;
- }
-
- LOG_INFO("sam3 - supports auto-erase, erase_check ignored");
- for (x = 0; x < bank->num_sectors; x++)
- bank->sectors[x].is_erased = 1;
-
- LOG_DEBUG("Done");
- return ERROR_OK;
-}
-
static int sam3_protect_check(struct flash_bank *bank)
{
int r;
((unsigned int)(FLASH_BANK1_BASE_256K_AX)),
((unsigned int)(FLASH_BANK1_BASE_512K_AX)));
return ERROR_FAIL;
- break;
/* at91sam3s and at91sam3n series only has bank 0*/
/* at91sam3u and at91sam3ax series has the same address for bank 0*/
return ERROR_OK;
}
+/**
+ * Remove all chips from the internal list without distingushing which one
+ * is owned by this bank. This simplification works only for one shot
+ * deallocation like current flash_free_all_banks()
+ */
+void sam3_free_driver_priv(struct flash_bank *bank)
+{
+ struct sam3_chip *chip = all_sam3_chips;
+ while (chip) {
+ struct sam3_chip *next = chip->next;
+ free(chip);
+ chip = next;
+ }
+ all_sam3_chips = NULL;
+}
+
static int sam3_GetDetails(struct sam3_bank_private *pPrivate)
{
const struct sam3_chip_details *pDetails;
pDetails = all_sam3_details;
while (pDetails->name) {
/* Compare cidr without version bits */
- if (pDetails->chipid_cidr == (pPrivate->pChip->cfg.CHIPID_CIDR & 0xFFFFFFE0))
+ if (((pDetails->chipid_cidr ^ pPrivate->pChip->cfg.CHIPID_CIDR) & 0xFFFFFFE0) == 0)
break;
else
pDetails++;
LOG_ERROR("SAM3 ChipID 0x%08x not found in table (perhaps you can ID this chip?)",
(unsigned int)(pPrivate->pChip->cfg.CHIPID_CIDR));
/* Help the victim, print details about the chip */
- LOG_INFO("SAM3 CHIPID_CIDR: 0x%08x decodes as follows",
+ LOG_INFO("SAM3 CHIPID_CIDR: 0x%08" PRIx32 " decodes as follows",
pPrivate->pChip->cfg.CHIPID_CIDR);
sam3_explain_chipid_cidr(pPrivate->pChip);
return ERROR_FAIL;
static int _sam3_probe(struct flash_bank *bank, int noise)
{
- unsigned x;
int r;
struct sam3_bank_private *pPrivate;
- LOG_DEBUG("Begin: Bank: %d, Noise: %d", bank->bank_number, noise);
+ LOG_DEBUG("Begin: Bank: %u, Noise: %d", bank->bank_number, noise);
if (bank->target->state != TARGET_HALTED) {
LOG_ERROR("Target not halted");
return ERROR_TARGET_NOT_HALTED;
return r;
/* update the flash bank size */
- for (x = 0; x < SAM3_MAX_FLASH_BANKS; x++) {
+ for (unsigned int x = 0; x < SAM3_MAX_FLASH_BANKS; x++) {
if (bank->base == pPrivate->pChip->details.bank[x].base_address) {
bank->size = pPrivate->pChip->details.bank[x].size_bytes;
break;
}
bank->num_sectors = pPrivate->nsectors;
- for (x = 0; ((int)(x)) < bank->num_sectors; x++) {
+ for (unsigned int x = 0; x < bank->num_sectors; x++) {
bank->sectors[x].size = pPrivate->sector_size;
bank->sectors[x].offset = x * (pPrivate->sector_size);
/* mark as unknown */
return _sam3_probe(bank, 0);
}
-static int sam3_erase(struct flash_bank *bank, int first, int last)
+static int sam3_erase(struct flash_bank *bank, unsigned int first,
+ unsigned int last)
{
struct sam3_bank_private *pPrivate;
int r;
if (!(pPrivate->probed))
return ERROR_FLASH_BANK_NOT_PROBED;
- if ((first == 0) && ((last + 1) == ((int)(pPrivate->nsectors)))) {
+ if ((first == 0) && ((last + 1) == pPrivate->nsectors)) {
/* whole chip */
LOG_DEBUG("Here");
return FLASHD_EraseEntireBank(pPrivate);
}
- LOG_INFO("sam3 auto-erases while programing (request ignored)");
+ LOG_INFO("sam3 auto-erases while programming (request ignored)");
return ERROR_OK;
}
-static int sam3_protect(struct flash_bank *bank, int set, int first, int last)
+static int sam3_protect(struct flash_bank *bank, int set, unsigned int first,
+ unsigned int last)
{
struct sam3_bank_private *pPrivate;
int r;
return ERROR_FLASH_BANK_NOT_PROBED;
if (set)
- r = FLASHD_Lock(pPrivate, (unsigned)(first), (unsigned)(last));
+ r = FLASHD_Lock(pPrivate, first, last);
else
- r = FLASHD_Unlock(pPrivate, (unsigned)(first), (unsigned)(last));
+ r = FLASHD_Unlock(pPrivate, first, last);
LOG_DEBUG("End: r=%d", r);
return r;
}
-static int sam3_info(struct flash_bank *bank, char *buf, int buf_size)
-{
- if (bank->target->state != TARGET_HALTED) {
- LOG_ERROR("Target not halted");
- return ERROR_TARGET_NOT_HALTED;
- }
- buf[0] = 0;
- return ERROR_OK;
-}
-
static int sam3_page_read(struct sam3_bank_private *pPrivate, unsigned pagenum, uint8_t *buf)
{
uint32_t adr;
return r;
}
-/* The code below is basically this: */
-/* compiled with */
-/* arm-none-eabi-gcc -mthumb -mcpu = cortex-m3 -O9 -S ./foobar.c -o foobar.s */
-/* */
-/* Only the *CPU* can write to the flash buffer. */
-/* the DAP cannot... so - we download this 28byte thing */
-/* Run the algorithm - (below) */
-/* to program the device */
-/* */
-/* ======================================== */
-/* #include <stdint.h> */
-/* */
-/* struct foo { */
-/* uint32_t *dst; */
-/* const uint32_t *src; */
-/* int n; */
-/* volatile uint32_t *base; */
-/* uint32_t cmd; */
-/* }; */
-/* */
-/* */
-/* uint32_t sam3_function(struct foo *p) */
-/* { */
-/* volatile uint32_t *v; */
-/* uint32_t *d; */
-/* const uint32_t *s; */
-/* int n; */
-/* uint32_t r; */
-/* */
-/* d = p->dst; */
-/* s = p->src; */
-/* n = p->n; */
-/* */
-/* do { */
-/* *d++ = *s++; */
-/* } while (--n) */
-/* ; */
-/* */
-/* v = p->base; */
-/* */
-/* v[ 1 ] = p->cmd; */
-/* do { */
-/* r = v[8/4]; */
-/* } while (!(r&1)) */
-/* ; */
-/* return r; */
-/* } */
-/* ======================================== */
-
-static const uint8_t
- sam3_page_write_opcodes[] = {
- /* 24 0000 0446 mov r4, r0 */
- 0x04, 0x46,
- /* 25 0002 6168 ldr r1, [r4, #4] */
- 0x61, 0x68,
- /* 26 0004 0068 ldr r0, [r0, #0] */
- 0x00, 0x68,
- /* 27 0006 A268 ldr r2, [r4, #8] */
- 0xa2, 0x68,
- /* 28 @ lr needed for prologue */
- /* 29 .L2: */
- /* 30 0008 51F8043B ldr r3, [r1], #4 */
- 0x51, 0xf8, 0x04, 0x3b,
- /* 31 000c 12F1FF32 adds r2, r2, #-1 */
- 0x12, 0xf1, 0xff, 0x32,
- /* 32 0010 40F8043B str r3, [r0], #4 */
- 0x40, 0xf8, 0x04, 0x3b,
- /* 33 0014 F8D1 bne .L2 */
- 0xf8, 0xd1,
- /* 34 0016 E268 ldr r2, [r4, #12] */
- 0xe2, 0x68,
- /* 35 0018 2369 ldr r3, [r4, #16] */
- 0x23, 0x69,
- /* 36 001a 5360 str r3, [r2, #4] */
- 0x53, 0x60,
- /* 37 001c 0832 adds r2, r2, #8 */
- 0x08, 0x32,
- /* 38 .L4: */
- /* 39 001e 1068 ldr r0, [r2, #0] */
- 0x10, 0x68,
- /* 40 0020 10F0010F tst r0, #1 */
- 0x10, 0xf0, 0x01, 0x0f,
- /* 41 0024 FBD0 beq .L4 */
- 0xfb, 0xd0,
- 0x00, 0xBE /* bkpt #0 */
-};
-
-static int sam3_page_write(struct sam3_bank_private *pPrivate, unsigned pagenum, uint8_t *buf)
+static int sam3_page_write(struct sam3_bank_private *pPrivate, unsigned pagenum, const uint8_t *buf)
{
uint32_t adr;
uint32_t status;
}
static int sam3_write(struct flash_bank *bank,
- uint8_t *buffer,
+ const uint8_t *buffer,
uint32_t offset,
uint32_t count)
{
COMMAND_HANDLER(sam3_handle_info_command)
{
struct sam3_chip *pChip;
- pChip = get_current_sam3(CMD_CTX);
+ pChip = get_current_sam3(CMD);
if (!pChip)
return ERROR_OK;
if (pChip->details.bank[0].pBank == NULL) {
x = 0;
need_define:
- command_print(CMD_CTX,
+ command_print(CMD,
"Please define bank %d via command: flash bank %s ... ",
x,
at91sam3_flash.name);
int r, who;
struct sam3_chip *pChip;
- pChip = get_current_sam3(CMD_CTX);
+ pChip = get_current_sam3(CMD);
if (!pChip)
return ERROR_OK;
}
if (pChip->details.bank[0].pBank == NULL) {
- command_print(CMD_CTX, "Bank0 must be defined first via: flash bank %s ...",
+ command_print(CMD, "Bank0 must be defined first via: flash bank %s ...",
at91sam3_flash.name);
return ERROR_FAIL;
}
switch (CMD_ARGC) {
default:
return ERROR_COMMAND_SYNTAX_ERROR;
- break;
case 0:
goto showall;
- break;
case 1:
who = -1;
break;
r = FLASHD_GetGPNVM(&(pChip->details.bank[0]), x, &v);
if (r != ERROR_OK)
break;
- command_print(CMD_CTX, "sam3-gpnvm%u: %u", x, v);
+ command_print(CMD, "sam3-gpnvm%u: %u", x, v);
}
return r;
}
if ((who >= 0) && (((unsigned)(who)) < pChip->details.n_gpnvms)) {
r = FLASHD_GetGPNVM(&(pChip->details.bank[0]), who, &v);
- command_print(CMD_CTX, "sam3-gpnvm%u: %u", who, v);
+ if (r == ERROR_OK)
+ command_print(CMD, "sam3-gpnvm%u: %u", who, v);
return r;
} else {
- command_print(CMD_CTX, "sam3-gpnvm invalid GPNVM: %u", who);
+ command_print(CMD, "sam3-gpnvm invalid GPNVM: %u", who);
return ERROR_COMMAND_SYNTAX_ERROR;
}
}
if (who == -1) {
- command_print(CMD_CTX, "Missing GPNVM number");
+ command_print(CMD, "Missing GPNVM number");
return ERROR_COMMAND_SYNTAX_ERROR;
}
(0 == strcmp("clear", CMD_ARGV[0]))) /* quietly accept both */
r = FLASHD_ClrGPNVM(&(pChip->details.bank[0]), who);
else {
- command_print(CMD_CTX, "Unknown command: %s", CMD_ARGV[0]);
+ command_print(CMD, "Unknown command: %s", CMD_ARGV[0]);
r = ERROR_COMMAND_SYNTAX_ERROR;
}
return r;
{
struct sam3_chip *pChip;
- pChip = get_current_sam3(CMD_CTX);
+ pChip = get_current_sam3(CMD);
if (!pChip)
return ERROR_OK;
COMMAND_PARSE_NUMBER(u32, CMD_ARGV[0], v);
if (v > 200000) {
/* absurd slow clock of 200Khz? */
- command_print(CMD_CTX, "Absurd/illegal slow clock freq: %d\n", (int)(v));
+ command_print(CMD, "Absurd/illegal slow clock freq: %d\n", (int)(v));
return ERROR_COMMAND_SYNTAX_ERROR;
}
pChip->cfg.slow_freq = v;
}
default:
/* error */
- command_print(CMD_CTX, "Too many parameters");
+ command_print(CMD, "Too many parameters");
return ERROR_COMMAND_SYNTAX_ERROR;
- break;
}
- command_print(CMD_CTX, "Slowclk freq: %d.%03dkhz",
+ command_print(CMD, "Slowclk freq: %d.%03dkhz",
(int)(pChip->cfg.slow_freq / 1000),
(int)(pChip->cfg.slow_freq % 1000));
return ERROR_OK;
.name = "info",
.handler = sam3_handle_info_command,
.mode = COMMAND_EXEC,
- .help = "Print information about the current at91sam3 chip"
+ .help = "Print information about the current at91sam3 chip "
"and its flash configuration.",
+ .usage = "",
},
{
.name = "slowclk",
COMMAND_REGISTRATION_DONE
};
-struct flash_driver at91sam3_flash = {
+const struct flash_driver at91sam3_flash = {
.name = "at91sam3",
.commands = at91sam3_command_handlers,
.flash_bank_command = sam3_flash_bank_command,
.read = default_flash_read,
.probe = sam3_probe,
.auto_probe = sam3_auto_probe,
- .erase_check = sam3_erase_check,
+ .erase_check = default_flash_blank_check,
.protect_check = sam3_protect_check,
- .info = sam3_info,
+ .free_driver_priv = sam3_free_driver_priv,
};
projects / fw / openocd / blobdiff