+// SPDX-License-Identifier: GPL-2.0-or-later
+
/***************************************************************************
* Copyright (C) 2009 by Alexei Babich *
* Rezonans plc., Chelyabinsk, Russia *
* *
* Copyright (C) 2011 by Erik Ahlen *
* Avalon Innovation, Sweden *
- * *
- * This program is free software; you can redistribute it and/or modify *
- * it under the terms of the GNU General Public License as published by *
- * the Free Software Foundation; either version 2 of the License, or *
- * (at your option) any later version. *
- * *
- * This program is distributed in the hope that it will be useful, *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
- * GNU General Public License for more details. *
- * *
- * You should have received a copy of the GNU General Public License *
- * along with this program; if not, write to the *
- * Free Software Foundation, Inc., *
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
***************************************************************************/
/*
* !! all function only tested with 2k page nand device; mxc_write_page
* writes the 4 MAIN_BUFFER's and is not compatible with < 2k page
* !! oob must be be used due to NFS bug
+ * !! oob must be 64 bytes per 2KiB page
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#include "mxc.h"
#include <target/target.h>
+#define OOB_SIZE 64
+
#define nfc_is_v1() (mxc_nf_info->mxc_version == MXC_VERSION_MX27 || \
- mxc_nf_info->mxc_version == MXC_VERSION_MX31)
+ mxc_nf_info->mxc_version == MXC_VERSION_MX31)
#define nfc_is_v2() (mxc_nf_info->mxc_version == MXC_VERSION_MX25 || \
- mxc_nf_info->mxc_version == MXC_VERSION_MX35)
+ mxc_nf_info->mxc_version == MXC_VERSION_MX35)
/* This permits to print (in LOG_INFO) how much bytes
* has been written after a page read or write.
static const char target_not_halted_err_msg[] =
"target must be halted to use mxc NAND flash controller";
static const char data_block_size_err_msg[] =
- "minimal granularity is one half-word, %" PRId32 " is incorrect";
+ "minimal granularity is one half-word, %" PRIu32 " is incorrect";
static const char sram_buffer_bounds_err_msg[] =
"trying to access out of SRAM buffer bound (addr=0x%" PRIx32 ")";
static const char get_status_register_err_msg[] = "can't get NAND status";
{
struct mxc_nf_controller *mxc_nf_info;
int hwecc_needed;
- int x;
mxc_nf_info = malloc(sizeof(struct mxc_nf_controller));
- if (mxc_nf_info == NULL) {
+ if (!mxc_nf_info) {
LOG_ERROR("no memory for nand controller");
return ERROR_FAIL;
}
mxc_nf_info->optype = MXC_NF_DATAOUT_PAGE;
mxc_nf_info->fin = MXC_NF_FIN_NONE;
mxc_nf_info->flags.target_little_endian =
- (nand->target->endianness == TARGET_LITTLE_ENDIAN);
+ (nand->target->endianness == TARGET_LITTLE_ENDIAN);
/*
- * should factory bad block indicator be swaped
+ * should factory bad block indicator be swapped
* as a workaround for how the nfc handles pages.
*/
if (CMD_ARGC > 4 && strcmp(CMD_ARGV[4], "biswap") == 0) {
mxc_nf_info->flags.biswap_enabled = 1;
}
- /*
- * testing host endianness
- */
- x = 1;
- if (*(char *) &x == 1)
- mxc_nf_info->flags.host_little_endian = 1;
- else
- mxc_nf_info->flags.host_little_endian = 0;
return ERROR_OK;
}
int retval = CALL_COMMAND_HANDLER(nand_command_get_device, 0, &nand);
if (retval != ERROR_OK) {
- command_print(CMD_CTX, "invalid nand device number or name: %s", CMD_ARGV[0]);
+ command_print(CMD, "invalid nand device number or name: %s", CMD_ARGV[0]);
return ERROR_COMMAND_ARGUMENT_INVALID;
}
mxc_nf_info->flags.biswap_enabled = false;
}
if (mxc_nf_info->flags.biswap_enabled)
- command_print(CMD_CTX, "BI-swapping enabled on %s", nand->name);
+ command_print(CMD, "BI-swapping enabled on %s", nand->name);
else
- command_print(CMD_CTX, "BI-swapping disabled on %s", nand->name);
+ command_print(CMD, "BI-swapping disabled on %s", nand->name);
return ERROR_OK;
}
static const struct command_registration mxc_sub_command_handlers[] = {
{
.name = "biswap",
- .handler = handle_mxc_biswap_command ,
- .help = "Turns on/off bad block information swaping from main area, "
- "without parameter query status.",
+ .mode = COMMAND_EXEC,
+ .handler = handle_mxc_biswap_command,
+ .help = "Turns on/off bad block information swapping from main area, "
+ "without parameter query status.",
.usage = "bank_id ['enable'|'disable']",
},
COMMAND_REGISTRATION_DONE
.name = "mxc",
.mode = COMMAND_ANY,
.help = "MXC NAND flash controller commands",
- .chain = mxc_sub_command_handlers
+ .chain = mxc_sub_command_handlers,
+ .usage = "",
},
COMMAND_REGISTRATION_DONE
};
int validate_target_result;
uint16_t buffsize_register_content;
uint32_t sreg_content;
- uint32_t SREG = MX2_FMCR;
- uint32_t SEL_16BIT = MX2_FMCR_NF_16BIT_SEL;
- uint32_t SEL_FMS = MX2_FMCR_NF_FMS;
+ uint32_t sreg = MX2_FMCR;
+ uint32_t sel_16bit = MX2_FMCR_NF_16BIT_SEL;
+ uint32_t sel_fms = MX2_FMCR_NF_FMS;
int retval;
uint16_t nand_status_content;
/*
mxc_nf_info->flags.one_kb_sram = 0;
if (mxc_nf_info->mxc_version == MXC_VERSION_MX31) {
- SREG = MX3_PCSR;
- SEL_16BIT = MX3_PCSR_NF_16BIT_SEL;
- SEL_FMS = MX3_PCSR_NF_FMS;
+ sreg = MX3_PCSR;
+ sel_16bit = MX3_PCSR_NF_16BIT_SEL;
+ sel_fms = MX3_PCSR_NF_FMS;
} else if (mxc_nf_info->mxc_version == MXC_VERSION_MX25) {
- SREG = MX25_RCSR;
- SEL_16BIT = MX25_RCSR_NF_16BIT_SEL;
- SEL_FMS = MX25_RCSR_NF_FMS;
+ sreg = MX25_RCSR;
+ sel_16bit = MX25_RCSR_NF_16BIT_SEL;
+ sel_fms = MX25_RCSR_NF_FMS;
} else if (mxc_nf_info->mxc_version == MXC_VERSION_MX35) {
- SREG = MX35_RCSR;
- SEL_16BIT = MX35_RCSR_NF_16BIT_SEL;
- SEL_FMS = MX35_RCSR_NF_FMS;
+ sreg = MX35_RCSR;
+ sel_16bit = MX35_RCSR_NF_16BIT_SEL;
+ sel_fms = MX35_RCSR_NF_FMS;
}
- target_read_u32(target, SREG, &sreg_content);
+ target_read_u32(target, sreg, &sreg_content);
if (!nand->bus_width) {
/* bus_width not yet defined. Read it from MXC_FMCR */
- nand->bus_width = (sreg_content & SEL_16BIT) ? 16 : 8;
+ nand->bus_width = (sreg_content & sel_16bit) ? 16 : 8;
} else {
/* bus_width forced in soft. Sync it to MXC_FMCR */
- sreg_content |= ((nand->bus_width == 16) ? SEL_16BIT : 0x00000000);
- target_write_u32(target, SREG, sreg_content);
+ sreg_content |= ((nand->bus_width == 16) ? sel_16bit : 0x00000000);
+ target_write_u32(target, sreg, sreg_content);
}
if (nand->bus_width == 16)
LOG_DEBUG("MXC_NF : bus is 16-bit width");
else
LOG_DEBUG("MXC_NF : bus is 8-bit width");
- if (!nand->page_size) {
- nand->page_size = (sreg_content & SEL_FMS) ? 2048 : 512;
- } else {
- sreg_content |= ((nand->page_size == 2048) ? SEL_FMS : 0x00000000);
- target_write_u32(target, SREG, sreg_content);
+ if (!nand->page_size)
+ nand->page_size = (sreg_content & sel_fms) ? 2048 : 512;
+ else {
+ sreg_content |= ((nand->page_size == 2048) ? sel_fms : 0x00000000);
+ target_write_u32(target, sreg, sreg_content);
}
if (mxc_nf_info->flags.one_kb_sram && (nand->page_size == 2048)) {
LOG_ERROR("NAND controller have only 1 kb SRAM, so "
- "pagesize 2048 is incompatible with it");
- } else {
+ "pagesize 2048 is incompatible with it");
+ } else
LOG_DEBUG("MXC_NF : NAND controller can handle pagesize of 2048");
- }
if (nfc_is_v2() && sreg_content & MX35_RCSR_NF_4K)
LOG_ERROR("MXC driver does not have support for 4k pagesize.");
if (!(nand_status_content & 0x0080)) {
LOG_INFO("NAND read-only");
mxc_nf_info->flags.nand_readonly = 1;
- } else {
+ } else
mxc_nf_info->flags.nand_readonly = 0;
- }
return ERROR_OK;
}
try_data_output_from_nand_chip = do_data_output(nand);
if (try_data_output_from_nand_chip != ERROR_OK) {
LOG_ERROR("mxc_read_data : read data failed : '%x'",
- try_data_output_from_nand_chip);
+ try_data_output_from_nand_chip);
return try_data_output_from_nand_chip;
}
return validate_target_result;
switch (command) {
- case NAND_CMD_READOOB:
- command = NAND_CMD_READ0;
- /* set read point for data_read() and read_block_data() to
- * spare area in SRAM buffer
- */
- if (nfc_is_v1())
- in_sram_address = MXC_NF_V1_SPARE_BUFFER0;
- else
- in_sram_address = MXC_NF_V2_SPARE_BUFFER0;
- break;
- case NAND_CMD_READ1:
- command = NAND_CMD_READ0;
- /*
- * offset == one half of page size
- */
- in_sram_address = MXC_NF_MAIN_BUFFER0 + (nand->page_size >> 1);
- break;
- default:
- in_sram_address = MXC_NF_MAIN_BUFFER0;
- break;
+ case NAND_CMD_READOOB:
+ command = NAND_CMD_READ0;
+ /* set read point for data_read() and read_block_data() to
+ * spare area in SRAM buffer
+ */
+ if (nfc_is_v1())
+ in_sram_address = MXC_NF_V1_SPARE_BUFFER0;
+ else
+ in_sram_address = MXC_NF_V2_SPARE_BUFFER0;
+ break;
+ case NAND_CMD_READ1:
+ command = NAND_CMD_READ0;
+ /*
+ * offset == one half of page size
+ */
+ in_sram_address = MXC_NF_MAIN_BUFFER0 + (nand->page_size >> 1);
+ break;
+ default:
+ in_sram_address = MXC_NF_MAIN_BUFFER0;
+ break;
}
target_write_u16(target, MXC_NF_FCMD, command);
sign_of_sequental_byte_read = 0;
/* Handle special read command and adjust NF_CFG2(FDO) */
switch (command) {
- case NAND_CMD_READID:
- mxc_nf_info->optype = MXC_NF_DATAOUT_NANDID;
- mxc_nf_info->fin = MXC_NF_FIN_DATAOUT;
- break;
- case NAND_CMD_STATUS:
- mxc_nf_info->optype = MXC_NF_DATAOUT_NANDSTATUS;
- mxc_nf_info->fin = MXC_NF_FIN_DATAOUT;
- target_write_u16 (target, MXC_NF_BUFADDR, 0);
- in_sram_address = 0;
- break;
- case NAND_CMD_READ0:
- mxc_nf_info->fin = MXC_NF_FIN_DATAOUT;
- mxc_nf_info->optype = MXC_NF_DATAOUT_PAGE;
- break;
- default:
- /* Ohter command use the default 'One page data out' FDO */
- mxc_nf_info->optype = MXC_NF_DATAOUT_PAGE;
- break;
+ case NAND_CMD_READID:
+ mxc_nf_info->optype = MXC_NF_DATAOUT_NANDID;
+ mxc_nf_info->fin = MXC_NF_FIN_DATAOUT;
+ break;
+ case NAND_CMD_STATUS:
+ mxc_nf_info->optype = MXC_NF_DATAOUT_NANDSTATUS;
+ mxc_nf_info->fin = MXC_NF_FIN_DATAOUT;
+ target_write_u16 (target, MXC_NF_BUFADDR, 0);
+ in_sram_address = 0;
+ break;
+ case NAND_CMD_READ0:
+ mxc_nf_info->fin = MXC_NF_FIN_DATAOUT;
+ mxc_nf_info->optype = MXC_NF_DATAOUT_PAGE;
+ break;
+ default:
+ /* Other command use the default 'One page data out' FDO */
+ mxc_nf_info->optype = MXC_NF_DATAOUT_PAGE;
+ break;
}
return ERROR_OK;
}
return tout;
alive_sleep(1);
- }
- while (tout-- > 0);
+ } while (tout-- > 0);
return tout;
}
static int mxc_write_page(struct nand_device *nand, uint32_t page,
- uint8_t *data, uint32_t data_size,
- uint8_t *oob, uint32_t oob_size)
+ uint8_t *data, uint32_t data_size,
+ uint8_t *oob, uint32_t oob_size)
{
struct mxc_nf_controller *mxc_nf_info = nand->controller_priv;
struct target *target = nand->target;
sign_of_sequental_byte_read = 0;
retval = ERROR_OK;
retval |= mxc_command(nand, NAND_CMD_SEQIN);
- retval |= mxc_address(nand, 0); /* col */
- retval |= mxc_address(nand, 0); /* col */
- retval |= mxc_address(nand, page & 0xff); /* page address */
- retval |= mxc_address(nand, (page >> 8) & 0xff); /* page address */
- retval |= mxc_address(nand, (page >> 16) & 0xff); /* page address */
+ retval |= mxc_address(nand, 0); /* col */
+ retval |= mxc_address(nand, 0); /* col */
+ retval |= mxc_address(nand, page & 0xff); /* page address */
+ retval |= mxc_address(nand, (page >> 8) & 0xff);/* page address */
+ retval |= mxc_address(nand, (page >> 16) & 0xff); /* page address */
target_write_buffer(target, MXC_NF_MAIN_BUFFER0, data_size, data);
if (oob) {
if (mxc_nf_info->flags.hw_ecc_enabled) {
/*
- * part of spare block will be overrided by hardware
+ * part of spare block will be overridden by hardware
* ECC generator
*/
- LOG_DEBUG("part of spare block will be overrided "
- "by hardware ECC generator");
+ LOG_DEBUG("part of spare block will be overridden "
+ "by hardware ECC generator");
}
if (nfc_is_v1())
target_write_buffer(target, MXC_NF_V1_SPARE_BUFFER0, oob_size, oob);
LOG_ERROR("Due to NFC Bug, oob is not correctly implemented in mxc driver");
return ERROR_NAND_OPERATION_FAILED;
}
- swap2 = 0xffff; /* Spare buffer unused forced to 0xffff */
+ swap2 = 0xffff; /* Spare buffer unused forced to 0xffff */
new_swap1 = (swap1 & 0xFF00) | (swap2 >> 8);
swap2 = (swap1 << 8) | (swap2 & 0xFF);
target_write_u16(target, MXC_NF_MAIN_BUFFER3 + 464, new_swap1);
if (nfc_is_v1())
- target_write_u16(target, MXC_NF_V1_SPARE_BUFFER3, swap2);
+ target_write_u16(target, MXC_NF_V1_SPARE_BUFFER3 + 4, swap2);
else
target_write_u16(target, MXC_NF_V2_SPARE_BUFFER3, swap2);
}
else
bufs = 1;
- for (uint8_t i = 0 ; i < bufs ; ++i) {
+ for (uint8_t i = 0; i < bufs; ++i) {
target_write_u16(target, MXC_NF_BUFADDR, i);
target_write_u16(target, MXC_NF_CFG2, MXC_NF_BIT_OP_FDI);
poll_result = poll_for_complete_op(nand, "data input");
}
static int mxc_read_page(struct nand_device *nand, uint32_t page,
- uint8_t *data, uint32_t data_size,
- uint8_t *oob, uint32_t oob_size)
+ uint8_t *data, uint32_t data_size,
+ uint8_t *oob, uint32_t oob_size)
{
struct mxc_nf_controller *mxc_nf_info = nand->controller_priv;
struct target *target = nand->target;
* validate target state
*/
retval = validate_target_state(nand);
- if (retval != ERROR_OK) {
+ if (retval != ERROR_OK)
return retval;
- }
- /* Reset address_cycles before mxc_command ?? */
+ /* Reset address_cycles before mxc_command ?? */
retval = mxc_command(nand, NAND_CMD_READ0);
- if (retval != ERROR_OK) return retval;
- retval = mxc_address(nand, 0); /* col */
- if (retval != ERROR_OK) return retval;
- retval = mxc_address(nand, 0); /* col */
- if (retval != ERROR_OK) return retval;
- retval = mxc_address(nand, page & 0xff); /* page address */
- if (retval != ERROR_OK) return retval;
- retval = mxc_address(nand, (page >> 8) & 0xff); /* page address */
- if (retval != ERROR_OK) return retval;
- retval = mxc_address(nand, (page >> 16) & 0xff); /* page address */
- if (retval != ERROR_OK) return retval;
+ if (retval != ERROR_OK)
+ return retval;
+ retval = mxc_address(nand, 0); /* col */
+ if (retval != ERROR_OK)
+ return retval;
+ retval = mxc_address(nand, 0); /* col */
+ if (retval != ERROR_OK)
+ return retval;
+ retval = mxc_address(nand, page & 0xff);/* page address */
+ if (retval != ERROR_OK)
+ return retval;
+ retval = mxc_address(nand, (page >> 8) & 0xff); /* page address */
+ if (retval != ERROR_OK)
+ return retval;
+ retval = mxc_address(nand, (page >> 16) & 0xff);/* page address */
+ if (retval != ERROR_OK)
+ return retval;
retval = mxc_command(nand, NAND_CMD_READSTART);
- if (retval != ERROR_OK) return retval;
+ if (retval != ERROR_OK)
+ return retval;
if (nfc_is_v1() && nand->page_size > 512)
bufs = 4;
else
bufs = 1;
- for (uint8_t i = 0 ; i < bufs ; ++i) {
+ for (uint8_t i = 0; i < bufs; ++i) {
target_write_u16(target, MXC_NF_BUFADDR, i);
mxc_nf_info->fin = MXC_NF_FIN_DATAOUT;
retval = do_data_output(nand);
}
if (nand->page_size > 512 && mxc_nf_info->flags.biswap_enabled) {
- uint32_t SPARE_BUFFER3;
+ uint32_t spare_buffer3;
/* BI-swap - work-around of mxc NFC for NAND device with page == 2k */
target_read_u16(target, MXC_NF_MAIN_BUFFER3 + 464, &swap1);
if (nfc_is_v1())
- SPARE_BUFFER3 = MXC_NF_V1_SPARE_BUFFER3;
+ spare_buffer3 = MXC_NF_V1_SPARE_BUFFER3 + 4;
else
- SPARE_BUFFER3 = MXC_NF_V2_SPARE_BUFFER3;
- target_read_u16(target, SPARE_BUFFER3, &swap2);
+ spare_buffer3 = MXC_NF_V2_SPARE_BUFFER3;
+ target_read_u16(target, spare_buffer3, &swap2);
new_swap1 = (swap1 & 0xFF00) | (swap2 >> 8);
swap2 = (swap1 << 8) | (swap2 & 0xFF);
target_write_u16(target, MXC_NF_MAIN_BUFFER3 + 464, new_swap1);
- target_write_u16(target, SPARE_BUFFER3, swap2);
+ target_write_u16(target, spare_buffer3, swap2);
}
if (data)
struct mxc_nf_controller *mxc_nf_info = nand->controller_priv;
uint32_t ret = addr;
if (addr > MXC_NF_V2_SPARE_BUFFER0 &&
- (addr & 0x1F) == MXC_NF_SPARE_BUFFER_LEN) {
+ (addr & 0x1F) == MXC_NF_SPARE_BUFFER_LEN)
ret += MXC_NF_SPARE_BUFFER_MAX - MXC_NF_SPARE_BUFFER_LEN;
- } else if (addr >= (mxc_nf_info->mxc_base_addr + (uint32_t)nand->page_size))
+ else if (addr >= (mxc_nf_info->mxc_base_addr + (uint32_t)nand->page_size))
ret = MXC_NF_V2_SPARE_BUFFER0;
return ret;
}
uint16_t work_mode = 0;
uint16_t temp;
/*
- * resets NAND flash controller in zero time ? I dont know.
+ * resets NAND flash controller in zero time ? I don't know.
*/
target_write_u16(target, MXC_NF_CFG1, MXC_NF_BIT_RESET_EN);
if (mxc_nf_info->mxc_version == MXC_VERSION_MX27)
if (target->endianness == TARGET_BIG_ENDIAN) {
LOG_DEBUG("MXC_NF : work in Big Endian mode");
work_mode |= MXC_NF_BIT_BE_EN;
- } else {
+ } else
LOG_DEBUG("MXC_NF : work in Little Endian mode");
- }
if (mxc_nf_info->flags.hw_ecc_enabled) {
LOG_DEBUG("MXC_NF : work with ECC mode");
work_mode |= MXC_NF_BIT_ECC_EN;
- } else {
+ } else
LOG_DEBUG("MXC_NF : work without ECC mode");
- }
if (nfc_is_v2()) {
+ target_write_u16(target, MXC_NF_V2_SPAS, OOB_SIZE / 2);
if (nand->page_size) {
uint16_t pages_per_block = nand->erase_size / nand->page_size;
work_mode |= MXC_NF_V2_CFG1_PPB(ffs(pages_per_block) - 6);
{
struct mxc_nf_controller *mxc_nf_info = nand->controller_priv;
struct target *target = nand->target;
- static uint8_t even_byte = 0;
+ static uint8_t even_byte;
uint16_t temp;
/*
* host-big_endian ??
if (sign_of_sequental_byte_read == 0)
even_byte = 0;
- if (in_sram_address >
- (nfc_is_v1() ? MXC_NF_V1_LAST_BUFFADDR : MXC_NF_V2_LAST_BUFFADDR)) {
+ if (in_sram_address > (nfc_is_v1() ? MXC_NF_V1_LAST_BUFFADDR : MXC_NF_V2_LAST_BUFFADDR)) {
LOG_ERROR(sram_buffer_bounds_err_msg, in_sram_address);
*value = 0;
sign_of_sequental_byte_read = 0;
struct mxc_nf_controller *mxc_nf_info = nand->controller_priv;
struct target *target = nand->target;
- if (in_sram_address >
- (nfc_is_v1() ? MXC_NF_V1_LAST_BUFFADDR : MXC_NF_V2_LAST_BUFFADDR)) {
+ if (in_sram_address > (nfc_is_v1() ? MXC_NF_V1_LAST_BUFFADDR : MXC_NF_V2_LAST_BUFFADDR)) {
LOG_ERROR(sram_buffer_bounds_err_msg, in_sram_address);
*value = 0;
return ERROR_NAND_OPERATION_FAILED;
}
if (mxc_nf_info->flags.target_little_endian !=
- (target->endianness == TARGET_LITTLE_ENDIAN)) {
+ (target->endianness == TARGET_LITTLE_ENDIAN)) {
/*
* endianness changed after NAND controller probed
*/
return ERROR_OK;
}
-int ecc_status_v1(struct nand_device *nand)
+static int ecc_status_v1(struct nand_device *nand)
{
struct mxc_nf_controller *mxc_nf_info = nand->controller_priv;
struct target *target = nand->target;
target_read_u16(target, MXC_NF_ECCSTATUS, &ecc_status);
switch (ecc_status & 0x000c) {
- case 1 << 2:
- LOG_INFO("main area read with 1 (correctable) error");
- break;
- case 2 << 2:
- LOG_INFO("main area read with more than 1 (incorrectable) error");
- return ERROR_NAND_OPERATION_FAILED;
- break;
+ case 1 << 2:
+ LOG_INFO("main area read with 1 (correctable) error");
+ break;
+ case 2 << 2:
+ LOG_INFO("main area read with more than 1 (incorrectable) error");
+ return ERROR_NAND_OPERATION_FAILED;
}
switch (ecc_status & 0x0003) {
- case 1:
- LOG_INFO("spare area read with 1 (correctable) error");
- break;
- case 2:
- LOG_INFO("main area read with more than 1 (incorrectable) error");
- return ERROR_NAND_OPERATION_FAILED;
- break;
+ case 1:
+ LOG_INFO("spare area read with 1 (correctable) error");
+ break;
+ case 2:
+ LOG_INFO("main area read with more than 1 (incorrectable) error");
+ return ERROR_NAND_OPERATION_FAILED;
}
return ERROR_OK;
}
-int ecc_status_v2(struct nand_device *nand)
+static int ecc_status_v2(struct nand_device *nand)
{
struct mxc_nf_controller *mxc_nf_info = nand->controller_priv;
struct target *target = nand->target;
struct target *target = nand->target;
int poll_result;
switch (mxc_nf_info->fin) {
- case MXC_NF_FIN_DATAOUT:
- /*
- * start data output operation (set MXC_NF_BIT_OP_DONE==0)
- */
- target_write_u16(target, MXC_NF_CFG2, MXC_NF_BIT_DATAOUT_TYPE(mxc_nf_info->optype));
- poll_result = poll_for_complete_op(nand, "data output");
- if (poll_result != ERROR_OK)
- return poll_result;
+ case MXC_NF_FIN_DATAOUT:
+ /*
+ * start data output operation (set MXC_NF_BIT_OP_DONE==0)
+ */
+ target_write_u16(target, MXC_NF_CFG2, MXC_NF_BIT_DATAOUT_TYPE(mxc_nf_info->optype));
+ poll_result = poll_for_complete_op(nand, "data output");
+ if (poll_result != ERROR_OK)
+ return poll_result;
- mxc_nf_info->fin = MXC_NF_FIN_NONE;
- /*
- * ECC stuff
- */
- if (mxc_nf_info->optype == MXC_NF_DATAOUT_PAGE &&
- mxc_nf_info->flags.hw_ecc_enabled) {
- int ecc_status;
- if (nfc_is_v1())
- ecc_status = ecc_status_v1(nand);
- else
- ecc_status = ecc_status_v2(nand);
- if (ecc_status != ERROR_OK)
- return ecc_status;
- }
- break;
- case MXC_NF_FIN_NONE:
- break;
+ mxc_nf_info->fin = MXC_NF_FIN_NONE;
+ /*
+ * ECC stuff
+ */
+ if (mxc_nf_info->optype == MXC_NF_DATAOUT_PAGE && mxc_nf_info->flags.hw_ecc_enabled) {
+ int ecc_status;
+ if (nfc_is_v1())
+ ecc_status = ecc_status_v1(nand);
+ else
+ ecc_status = ecc_status_v2(nand);
+ if (ecc_status != ERROR_OK)
+ return ecc_status;
+ }
+ break;
+ case MXC_NF_FIN_NONE:
+ break;
}
return ERROR_OK;
}
struct nand_flash_controller mxc_nand_flash_controller = {
- .name = "mxc",
- .nand_device_command = &mxc_nand_device_command,
- .commands = mxc_nand_command_handler,
- .init = &mxc_init,
- .reset = &mxc_reset,
- .command = &mxc_command,
- .address = &mxc_address,
- .write_data = &mxc_write_data,
- .read_data = &mxc_read_data,
- .write_page = &mxc_write_page,
- .read_page = &mxc_read_page,
- .nand_ready = &mxc_nand_ready,
+ .name = "mxc",
+ .nand_device_command = &mxc_nand_device_command,
+ .commands = mxc_nand_command_handler,
+ .init = &mxc_init,
+ .reset = &mxc_reset,
+ .command = &mxc_command,
+ .address = &mxc_address,
+ .write_data = &mxc_write_data,
+ .read_data = &mxc_read_data,
+ .write_page = &mxc_write_page,
+ .read_page = &mxc_read_page,
+ .nand_ready = &mxc_nand_ready,
};
projects / fw / openocd / blobdiff