nand_device_t -> struct nand_device

[fw/openocd] / src / flash / lpc2900.c

diff --git a/src/flash/lpc2900.c b/src/flash/lpc2900.c
index 8d1eeb8f4e099bea5d7bb438df23ecf051552853..49d02598920221230958443cb6c64bc11617e572 100644 (file)
--- a/src/flash/lpc2900.c
+++ b/src/flash/lpc2900.c
@@ -199,7 +199,7 @@ static uint32_t lpc2900_wait_status( flash_bank_t *bank,
                                      int timeout )
 {
        uint32_t int_status;
-       target_t *target = bank->target;
+       struct target *target = bank->target;
 
 
        do
@@ -283,7 +283,7 @@ static uint32_t lpc2900_read_security_status( struct flash_bank_s *bank )
                return status;
        }
 
-       target_t *target = bank->target;
+       struct target *target = bank->target;
 
        /* Enable ISS access */
        target_write_u32(target, FCTR, FCTR_FS_CS | FCTR_FS_WEB | FCTR_FS_ISS);
@@ -361,7 +361,7 @@ static uint32_t lpc2900_run_bist128(struct flash_bank_s *bank,
                                     uint32_t addr_to,
                                     uint32_t (*signature)[4] )
 {
-       target_t *target = bank->target;
+       struct target *target = bank->target;
 
        /* Clear END_OF_MISR interrupt status */
        target_write_u32( target, INT_CLR_STATUS, INTSRC_END_OF_MISR );
@@ -436,7 +436,7 @@ static int lpc2900_write_index_page( struct flash_bank_s *bank,
        }
 
        /* Get target, and check if it's halted */
-       target_t *target = bank->target;
+       struct target *target = bank->target;
        if( target->state != TARGET_HALTED )
        {
                LOG_ERROR( "Target not halted" );
@@ -597,7 +597,7 @@ COMMAND_HANDLER(lpc2900_handle_read_custom_command)
        lpc2900_info->risky = 0;
 
        /* Get target, and check if it's halted */
-       target_t *target = bank->target;
+       struct target *target = bank->target;
        if( target->state != TARGET_HALTED )
        {
                LOG_ERROR( "Target not halted" );
@@ -710,7 +710,7 @@ COMMAND_HANDLER(lpc2900_handle_write_custom_command)
        lpc2900_info->risky = 0;
 
        /* Get target, and check if it's halted */
-       target_t *target = bank->target;
+       struct target *target = bank->target;
        if (target->state != TARGET_HALTED)
        {
                LOG_ERROR("Target not halted");
@@ -718,7 +718,7 @@ COMMAND_HANDLER(lpc2900_handle_write_custom_command)
        }
 
        /* The image will always start at offset 0 */
-       image_t image;
+       struct image image;
        image.base_address_set = 1;
        image.base_address = 0;
        image.start_address_set = 0;
@@ -1075,7 +1075,7 @@ static int lpc2900_erase(struct flash_bank_s *bank, int first, int last)
        uint32_t status;
        int sector;
        int last_unsecured_sector;
-       target_t *target = bank->target;
+       struct target *target = bank->target;
        struct lpc2900_flash_bank *lpc2900_info = bank->driver_priv;
 
 
@@ -1205,7 +1205,7 @@ static int lpc2900_write(struct flash_bank_s *bank, uint8_t *buffer,
        uint8_t page[FLASH_PAGE_SIZE];
        uint32_t status;
        uint32_t num_bytes;
-       target_t *target = bank->target;
+       struct target *target = bank->target;
        struct lpc2900_flash_bank *lpc2900_info = bank->driver_priv;
        int sector;
        int retval;
@@ -1294,7 +1294,7 @@ static int lpc2900_write(struct flash_bank_s *bank, uint8_t *buffer,
 
        /* Try working area allocation. Start with a large buffer, and try with
           reduced size if that fails. */
-       working_area_t *warea;
+       struct working_area *warea;
        uint32_t buffer_size = lpc2900_info->max_ram_block - 1 * KiB;
        while( (retval = target_alloc_working_area(target,
                                                   buffer_size + target_code_size,
@@ -1314,7 +1314,7 @@ static int lpc2900_write(struct flash_bank_s *bank, uint8_t *buffer,
        if( warea )
        {
                struct reg_param reg_params[5];
-               armv4_5_algorithm_t armv4_5_info;
+               struct armv4_5_algorithm armv4_5_info;
 
                /* We can use target mode. Download the algorithm. */
                retval = target_write_buffer( target,
@@ -1551,7 +1551,7 @@ static int lpc2900_write(struct flash_bank_s *bank, uint8_t *buffer,
 static int lpc2900_probe(struct flash_bank_s *bank)
 {
        struct lpc2900_flash_bank *lpc2900_info = bank->driver_priv;
-       target_t *target = bank->target;
+       struct target *target = bank->target;
        int i = 0;
        uint32_t offset;