#include "config.h"
#endif
-#include "replacements.h"
-
#include "lpc288x.h"
-
-#include "flash.h"
-#include "target.h"
-#include "log.h"
#include "binarybuffer.h"
-#include "types.h"
-#include <stdlib.h>
-#include <string.h>
-#include <unistd.h>
#define LOAD_TIMER_ERASE 0
#define LOAD_TIMER_WRITE 1
/* F_CLK_TIME */
#define FCT_CLK_DIV_MASK 0x0FFF
-int lpc288x_register_commands(struct command_context_s *cmd_ctx);
-int lpc288x_flash_bank_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc, struct flash_bank_s *bank);
-int lpc288x_erase(struct flash_bank_s *bank, int first, int last);
-int lpc288x_protect(struct flash_bank_s *bank, int set, int first, int last);
-int lpc288x_write(struct flash_bank_s *bank, u8 *buffer, u32 offset, u32 count);
-int lpc288x_probe(struct flash_bank_s *bank);
-int lpc288x_auto_probe(struct flash_bank_s *bank);
-int lpc288x_erase_check(struct flash_bank_s *bank);
-int lpc288x_protect_check(struct flash_bank_s *bank);
-int lpc288x_info(struct flash_bank_s *bank, char *buf, int buf_size);
-void lpc288x_set_flash_mode(flash_bank_t *bank, u8 flashplane, int mode);
-u32 lpc288x_wait_status_busy(flash_bank_t *bank, int timeout);
-void lpc288x_load_timer(int erase, struct target_s *target);
-void lpc288x_set_flash_clk(struct flash_bank_s *bank);
-u32 lpc288x_system_ready(struct flash_bank_s *bank);
-int lpc288x_handle_part_id_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
+static int lpc288x_register_commands(struct command_context_s *cmd_ctx);
+static int lpc288x_flash_bank_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc, struct flash_bank_s *bank);
+static int lpc288x_erase(struct flash_bank_s *bank, int first, int last);
+static int lpc288x_protect(struct flash_bank_s *bank, int set, int first, int last);
+static int lpc288x_write(struct flash_bank_s *bank, uint8_t *buffer, uint32_t offset, uint32_t count);
+static int lpc288x_probe(struct flash_bank_s *bank);
+static int lpc288x_erase_check(struct flash_bank_s *bank);
+static int lpc288x_protect_check(struct flash_bank_s *bank);
+static int lpc288x_info(struct flash_bank_s *bank, char *buf, int buf_size);
+static uint32_t lpc288x_wait_status_busy(flash_bank_t *bank, int timeout);
+static void lpc288x_load_timer(int erase, struct target_s *target);
+static void lpc288x_set_flash_clk(struct flash_bank_s *bank);
+static uint32_t lpc288x_system_ready(struct flash_bank_s *bank);
flash_driver_t lpc288x_flash =
{
.info = lpc288x_info
};
-
-int lpc288x_register_commands(struct command_context_s *cmd_ctx)
+static int lpc288x_register_commands(struct command_context_s *cmd_ctx)
{
return ERROR_OK;
}
-u32 lpc288x_wait_status_busy(flash_bank_t *bank, int timeout)
+static uint32_t lpc288x_wait_status_busy(flash_bank_t *bank, int timeout)
{
- u32 status;
+ uint32_t status;
target_t *target = bank->target;
do
{
- usleep(1000);
+ alive_sleep(1);
timeout--;
target_read_u32(target, F_STAT, &status);
}while (((status & FS_DONE) == 0) && timeout);
-
- if(timeout == 0)
+
+ if (timeout == 0)
{
LOG_DEBUG("Timedout!");
return ERROR_FLASH_OPERATION_FAILED;
}
/* Read device id register and fill in driver info structure */
-int lpc288x_read_part_info(struct flash_bank_s *bank)
+static int lpc288x_read_part_info(struct flash_bank_s *bank)
{
lpc288x_flash_bank_t *lpc288x_info = bank->driver_priv;
target_t *target = bank->target;
- u32 cidr;
-
+ uint32_t cidr;
+
int i = 0;
- u32 offset;
-
+ uint32_t offset;
+
if (lpc288x_info->cidr == 0x0102100A)
return ERROR_OK; /* already probed, multiple probes may cause memory leak, not allowed */
-
+
/* Read and parse chip identification register */
target_read_u32(target, DBGU_CIDR, &cidr);
-
+
if (cidr != 0x0102100A)
{
- LOG_WARNING("Cannot identify target as an LPC288X (%08X)",cidr);
+ LOG_WARNING("Cannot identify target as an LPC288X (%08" PRIx32 ")",cidr);
return ERROR_FLASH_OPERATION_FAILED;
}
-
+
lpc288x_info->cidr = cidr;
lpc288x_info->sector_size_break = 0x000F0000;
lpc288x_info->target_name = "LPC288x";
-
+
/* setup the sector info... */
offset = bank->base;
bank->num_sectors = 23;
bank->sectors = malloc(sizeof(flash_sector_t) * 23);
-
+
for (i = 0; i < 15; i++)
{
bank->sectors[i].offset = offset;
bank->sectors[i].is_erased = -1;
bank->sectors[i].is_protected = 1;
}
-
+
return ERROR_OK;
}
-int lpc288x_protect_check(struct flash_bank_s *bank)
+static int lpc288x_protect_check(struct flash_bank_s *bank)
{
- return ERROR_OK;
+ return ERROR_OK;
}
/* flash_bank LPC288x 0 0 0 0 <target#> <cclk> */
-int lpc288x_flash_bank_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc, struct flash_bank_s *bank)
+static int lpc288x_flash_bank_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc, struct flash_bank_s *bank)
{
lpc288x_flash_bank_t *lpc288x_info;
-
+
if (argc < 6)
{
LOG_WARNING("incomplete flash_bank LPC288x configuration");
return ERROR_FLASH_BANK_INVALID;
}
-
+
lpc288x_info = malloc(sizeof(lpc288x_flash_bank_t));
bank->driver_priv = lpc288x_info;
-
+
/* part wasn't probed for info yet */
lpc288x_info->cidr = 0;
lpc288x_info->cclk = strtoul(args[6], NULL, 0);
-
+
return ERROR_OK;
}
* AHB = 12 MHz ?
* 12000000/66000 = 182
* CLK_DIV = 60 ? */
-void lpc288x_set_flash_clk(struct flash_bank_s *bank)
+static void lpc288x_set_flash_clk(struct flash_bank_s *bank)
{
- u32 clk_time;
+ uint32_t clk_time;
lpc288x_flash_bank_t *lpc288x_info = bank->driver_priv;
clk_time = (lpc288x_info->cclk / 66000) / 3;
target_write_u32(bank->target, F_CTRL, FC_CS | FC_WEN);
/* AHB tcyc (in ns) 83 ns
* LOAD_TIMER_ERASE FPT_TIME = ((400,000,000 / AHB tcyc (in ns)) - 2) / 512
- * = 9412 (9500) (AN10548 9375)
+ * = 9412 (9500) (AN10548 9375)
* LOAD_TIMER_WRITE FPT_TIME = ((1,000,000 / AHB tcyc (in ns)) - 2) / 512
- * = 23 (75) (AN10548 72 - is this wrong?)
+ * = 23 (75) (AN10548 72 - is this wrong?)
* TODO: Sort out timing calcs ;) */
-void lpc288x_load_timer(int erase, struct target_s *target)
+static void lpc288x_load_timer(int erase, struct target_s *target)
{
if (erase == LOAD_TIMER_ERASE)
{
}
}
-u32 lpc288x_system_ready(struct flash_bank_s *bank)
+static uint32_t lpc288x_system_ready(struct flash_bank_s *bank)
{
lpc288x_flash_bank_t *lpc288x_info = bank->driver_priv;
if (lpc288x_info->cidr == 0)
{
return ERROR_FLASH_BANK_NOT_PROBED;
}
-
+
if (bank->target->state != TARGET_HALTED)
{
LOG_ERROR("Target not halted");
return ERROR_OK;
}
-int lpc288x_erase_check(struct flash_bank_s *bank)
+static int lpc288x_erase_check(struct flash_bank_s *bank)
{
- u32 status = lpc288x_system_ready(bank); /* probed? halted? */
+ uint32_t status = lpc288x_system_ready(bank); /* probed? halted? */
if (status != ERROR_OK)
{
LOG_INFO("Processor not halted/not probed");
return status;
}
-
+
return ERROR_OK;
}
-int lpc288x_erase(struct flash_bank_s *bank, int first, int last)
+static int lpc288x_erase(struct flash_bank_s *bank, int first, int last)
{
- u32 status;
+ uint32_t status;
int sector;
target_t *target = bank->target;
-
+
status = lpc288x_system_ready(bank); /* probed? halted? */
if (status != ERROR_OK)
{
return status;
}
-
+
if ((first < 0) || (last < first) || (last >= bank->num_sectors))
{
LOG_INFO("Bad sector range");
return ERROR_FLASH_SECTOR_INVALID;
}
-
+
/* Configure the flash controller timing */
lpc288x_set_flash_clk(bank);
-
+
for (sector = first; sector <= last; sector++)
{
if (lpc288x_wait_status_busy(bank, 1000) != ERROR_OK)
{
return ERROR_FLASH_OPERATION_FAILED;
}
-
+
lpc288x_load_timer(LOAD_TIMER_ERASE,target);
-
+
target_write_u32(target, bank->sectors[sector].offset, 0x00);
-
+
target_write_u32(target, F_CTRL, FC_PROG_REQ | FC_PROTECT | FC_CS);
}
if (lpc288x_wait_status_busy(bank, 1000) != ERROR_OK)
return ERROR_OK;
}
-int lpc288x_write(struct flash_bank_s *bank, u8 *buffer, u32 offset, u32 count)
+static int lpc288x_write(struct flash_bank_s *bank, uint8_t *buffer, uint32_t offset, uint32_t count)
{
- u8 page_buffer[FLASH_PAGE_SIZE];
- u32 i, status, source_offset,dest_offset;
+ uint8_t page_buffer[FLASH_PAGE_SIZE];
+ uint32_t status, source_offset,dest_offset;
target_t *target = bank->target;
- u32 bytes_remaining = count;
- u32 first_sector, last_sector, sector, page;
-
+ uint32_t bytes_remaining = count;
+ uint32_t first_sector, last_sector, sector, page;
+ int i;
+
/* probed? halted? */
status = lpc288x_system_ready(bank);
if (status != ERROR_OK)
{
return status;
}
-
+
/* Initialise search indices */
first_sector = last_sector = 0xffffffff;
-
+
/* validate the write range... */
for (i = 0; i < bank->num_sectors; i++)
{
/* all writes must start on a sector boundary... */
if (offset % bank->sectors[i].size)
{
- LOG_INFO("offset 0x%x breaks required alignment 0x%x", offset, bank->sectors[i].size);
+ LOG_INFO("offset 0x%" PRIx32 " breaks required alignment 0x%" PRIx32 "", offset, bank->sectors[i].size);
return ERROR_FLASH_DST_BREAKS_ALIGNMENT;
}
}
last_sector = i;
}
}
-
+
/* Range check... */
if (first_sector == 0xffffffff || last_sector == 0xffffffff)
{
- LOG_INFO("Range check failed %x %x", offset, count);
+ LOG_INFO("Range check failed %" PRIx32 " %" PRIx32 "", offset, count);
return ERROR_FLASH_DST_OUT_OF_BANK;
}
-
+
/* Configure the flash controller timing */
lpc288x_set_flash_clk(bank);
-
+
/* initialise the offsets */
source_offset = 0;
dest_offset = 0;
-
+
for (sector = first_sector; sector <= last_sector; sector++)
{
for (page = 0; page < bank->sectors[sector].size / FLASH_PAGE_SIZE; page++)
count = FLASH_PAGE_SIZE;
memcpy(page_buffer, &buffer[source_offset], count);
}
-
+
/* Wait for flash to become ready */
if (lpc288x_wait_status_busy(bank, 1000) != ERROR_OK)
{
return ERROR_FLASH_OPERATION_FAILED;
}
-
+
/* fill flash data latches with 1's */
target_write_u32(target, F_CTRL, FC_CS | FC_SET_DATA | FC_WEN | FC_FUNC);
-
+
target_write_u32(target, F_CTRL, FC_CS | FC_WEN | FC_FUNC);
/*would be better to use the clean target_write_buffer() interface but
* it seems not to be a LOT slower....
* bulk_write_memory() is no quicker :(*/
#if 1
- if (target->type->write_memory(target, offset + dest_offset, 4, 128, page_buffer) != ERROR_OK)
+ if (target_write_memory(target, offset + dest_offset, 4, 128, page_buffer) != ERROR_OK)
{
- LOG_ERROR("Write failed s %x p %x", sector, page);
+ LOG_ERROR("Write failed s %" PRIx32 " p %" PRIx32 "", sector, page);
return ERROR_FLASH_OPERATION_FAILED;
}
#else
dest_offset += FLASH_PAGE_SIZE;
source_offset += count;
bytes_remaining -= count;
-
+
lpc288x_load_timer(LOAD_TIMER_WRITE, target);
-
+
target_write_u32(target, F_CTRL, FC_PROG_REQ | FC_PROTECT | FC_FUNC | FC_CS);
}
}
-
+
return ERROR_OK;
}
-int lpc288x_probe(struct flash_bank_s *bank)
+static int lpc288x_probe(struct flash_bank_s *bank)
{
/* we only deal with LPC2888 so flash config is fixed */
lpc288x_flash_bank_t *lpc288x_info = bank->driver_priv;
int retval;
-
+
if (lpc288x_info->cidr != 0)
{
return ERROR_OK; /* already probed */
}
-
+
if (bank->target->state != TARGET_HALTED)
{
LOG_ERROR("Target not halted");
return ERROR_TARGET_NOT_HALTED;
}
-
+
retval = lpc288x_read_part_info(bank);
if (retval != ERROR_OK)
return retval;
return ERROR_OK;
}
-int lpc288x_info(struct flash_bank_s *bank, char *buf, int buf_size)
+static int lpc288x_info(struct flash_bank_s *bank, char *buf, int buf_size)
{
snprintf(buf, buf_size, "lpc288x flash driver");
return ERROR_OK;
}
-int lpc288x_protect(struct flash_bank_s *bank, int set, int first, int last)
+static int lpc288x_protect(struct flash_bank_s *bank, int set, int first, int last)
{
int lockregion, status;
- u32 value;
+ uint32_t value;
target_t *target = bank->target;
-
+
/* probed? halted? */
- status = lpc288x_system_ready(bank);
+ status = lpc288x_system_ready(bank);
if (status != ERROR_OK)
{
return status;
}
-
+
if ((first < 0) || (last < first) || (last >= bank->num_sectors))
{
return ERROR_FLASH_SECTOR_INVALID;
}
-
+
/* Configure the flash controller timing */
- lpc288x_set_flash_clk(bank);
-
+ lpc288x_set_flash_clk(bank);
+
for (lockregion = first; lockregion <= last; lockregion++)
{
if (set)
target_write_u32(target, bank->sectors[lockregion].offset, value);
target_write_u32(target, F_CTRL, FC_LOAD_REQ | FC_PROTECT | FC_WEN | FC_FUNC | FC_CS);
}
-
+
return ERROR_OK;
}
projects / fw / openocd / blobdiff