/***************************************************************************
- * Copyright (C) 2005 by Dominic Rath *
+ * Copyright (C) 2005, 2007 by Dominic Rath *
* Dominic.Rath@gmx.de *
* *
* This program is free software; you can redistribute it and/or modify *
int cfi_protect(struct flash_bank_s *bank, int set, int first, int last);
int cfi_write(struct flash_bank_s *bank, u8 *buffer, u32 offset, u32 count);
int cfi_probe(struct flash_bank_s *bank);
+int cfi_auto_probe(struct flash_bank_s *bank);
int cfi_erase_check(struct flash_bank_s *bank);
int cfi_protect_check(struct flash_bank_s *bank);
int cfi_info(struct flash_bank_s *bank, char *buf, int buf_size);
#define CFI_MAX_BUS_WIDTH 4
#define CFI_MAX_CHIP_WIDTH 4
+/* defines internal maximum size for code fragment in cfi_intel_write_block() */
+#define CFI_MAX_INTEL_CODESIZE 256
+
flash_driver_t cfi_flash =
{
.name = "cfi",
.protect = cfi_protect,
.write = cfi_write,
.probe = cfi_probe,
+ .auto_probe = cfi_auto_probe,
.erase_check = cfi_erase_check,
.protect_check = cfi_protect_check,
.info = cfi_info
};
+cfi_unlock_addresses_t cfi_unlock_addresses[] =
+{
+ [CFI_UNLOCK_555_2AA] = { .unlock1 = 0x555, .unlock2 = 0x2aa },
+ [CFI_UNLOCK_5555_2AAA] = { .unlock1 = 0x5555, .unlock2 = 0x2aaa },
+};
+
+/* CFI fixups foward declarations */
+void cfi_fixup_non_cfi(flash_bank_t *flash, void *param);
+void cfi_fixup_0002_erase_regions(flash_bank_t *flash, void *param);
+void cfi_fixup_0002_unlock_addresses(flash_bank_t *flash, void *param);
+void cfi_fixup_atmel_reversed_erase_regions(flash_bank_t *flash, void *param);
+
+/* fixup after identifying JEDEC manufactuer and ID */
+cfi_fixup_t cfi_jedec_fixups[] = {
+ {CFI_MFR_SST, 0x00D4, cfi_fixup_non_cfi, NULL},
+ {CFI_MFR_SST, 0x00D5, cfi_fixup_non_cfi, NULL},
+ {CFI_MFR_SST, 0x00D6, cfi_fixup_non_cfi, NULL},
+ {CFI_MFR_SST, 0x00D7, cfi_fixup_non_cfi, NULL},
+ {CFI_MFR_SST, 0x2780, cfi_fixup_non_cfi, NULL},
+ {CFI_MFR_ST, 0x00D5, cfi_fixup_non_cfi, NULL},
+ {CFI_MFR_ST, 0x00D6, cfi_fixup_non_cfi, NULL},
+ {CFI_MFR_AMD, 0x2223, cfi_fixup_non_cfi, NULL},
+ {CFI_MFR_AMD, 0x22ab, cfi_fixup_non_cfi, NULL},
+ {0, 0, NULL, NULL}
+};
+
+/* fixup after reading cmdset 0002 primary query table */
+cfi_fixup_t cfi_0002_fixups[] = {
+ {CFI_MFR_SST, 0x00D4, cfi_fixup_0002_unlock_addresses, &cfi_unlock_addresses[CFI_UNLOCK_5555_2AAA]},
+ {CFI_MFR_SST, 0x00D5, cfi_fixup_0002_unlock_addresses, &cfi_unlock_addresses[CFI_UNLOCK_5555_2AAA]},
+ {CFI_MFR_SST, 0x00D6, cfi_fixup_0002_unlock_addresses, &cfi_unlock_addresses[CFI_UNLOCK_5555_2AAA]},
+ {CFI_MFR_SST, 0x00D7, cfi_fixup_0002_unlock_addresses, &cfi_unlock_addresses[CFI_UNLOCK_5555_2AAA]},
+ {CFI_MFR_SST, 0x2780, cfi_fixup_0002_unlock_addresses, &cfi_unlock_addresses[CFI_UNLOCK_5555_2AAA]},
+ {CFI_MFR_ATMEL, 0x00C8, cfi_fixup_atmel_reversed_erase_regions, NULL},
+ {CFI_MFR_ANY, CFI_ID_ANY, cfi_fixup_0002_erase_regions, NULL},
+ {0, 0, NULL, NULL}
+};
+
+/* fixup after reading cmdset 0001 primary query table */
+cfi_fixup_t cfi_0001_fixups[] = {
+ {0, 0, NULL, NULL}
+};
+
+void cfi_fixup(flash_bank_t *bank, cfi_fixup_t *fixups)
+{
+ cfi_flash_bank_t *cfi_info = bank->driver_priv;
+ cfi_fixup_t *f;
+
+ for (f = fixups; f->fixup; f++)
+ {
+ if (((f->mfr == CFI_MFR_ANY) || (f->mfr == cfi_info->manufacturer)) &&
+ ((f->id == CFI_ID_ANY) || (f->id == cfi_info->device_id)))
+ {
+ f->fixup(bank, f->param);
+ }
+ }
+}
+
inline u32 flash_address(flash_bank_t *bank, int sector, u32 offset)
{
/* while the sector list isn't built, only accesses to sector 0 work */
void cfi_command(flash_bank_t *bank, u8 cmd, u8 *cmd_buf)
{
- cfi_flash_bank_t *cfi_info = bank->driver_priv;
int i;
-
+
/* clear whole buffer, to ensure bits that exceed the bus_width
* are set to zero
*/
for (i = 0; i < CFI_MAX_BUS_WIDTH; i++)
cmd_buf[i] = 0;
- if (cfi_info->target->endianness == TARGET_LITTLE_ENDIAN)
+ if (bank->target->endianness == TARGET_LITTLE_ENDIAN)
{
for (i = bank->bus_width; i > 0; i--)
{
*/
u8 cfi_query_u8(flash_bank_t *bank, int sector, u32 offset)
{
- cfi_flash_bank_t *cfi_info = bank->driver_priv;
- target_t *target = cfi_info->target;
+ target_t *target = bank->target;
u8 data[CFI_MAX_BUS_WIDTH];
-
+
target->type->read_memory(target, flash_address(bank, sector, offset), bank->bus_width, 1, data);
-
- if (cfi_info->target->endianness == TARGET_LITTLE_ENDIAN)
+
+ if (bank->target->endianness == TARGET_LITTLE_ENDIAN)
return data[0];
else
return data[bank->bus_width - 1];
*/
u8 cfi_get_u8(flash_bank_t *bank, int sector, u32 offset)
{
- cfi_flash_bank_t *cfi_info = bank->driver_priv;
- target_t *target = cfi_info->target;
+ target_t *target = bank->target;
u8 data[CFI_MAX_BUS_WIDTH];
int i;
-
+
target->type->read_memory(target, flash_address(bank, sector, offset), bank->bus_width, 1, data);
-
- if (cfi_info->target->endianness == TARGET_LITTLE_ENDIAN)
+
+ if (bank->target->endianness == TARGET_LITTLE_ENDIAN)
{
for (i = 0; i < bank->bus_width / bank->chip_width; i++)
data[0] |= data[i];
-
+
return data[0];
}
else
u8 value = 0;
for (i = 0; i < bank->bus_width / bank->chip_width; i++)
value |= data[bank->bus_width - 1 - i];
-
+
return value;
}
}
u16 cfi_query_u16(flash_bank_t *bank, int sector, u32 offset)
{
- cfi_flash_bank_t *cfi_info = bank->driver_priv;
- target_t *target = cfi_info->target;
+ target_t *target = bank->target;
u8 data[CFI_MAX_BUS_WIDTH * 2];
-
+
target->type->read_memory(target, flash_address(bank, sector, offset), bank->bus_width, 2, data);
- if (cfi_info->target->endianness == TARGET_LITTLE_ENDIAN)
+ if (bank->target->endianness == TARGET_LITTLE_ENDIAN)
return data[0] | data[bank->bus_width] << 8;
else
return data[bank->bus_width - 1] | data[(2 * bank->bus_width) - 1] << 8;
u32 cfi_query_u32(flash_bank_t *bank, int sector, u32 offset)
{
- cfi_flash_bank_t *cfi_info = bank->driver_priv;
- target_t *target = cfi_info->target;
+ target_t *target = bank->target;
u8 data[CFI_MAX_BUS_WIDTH * 4];
-
+
target->type->read_memory(target, flash_address(bank, sector, offset), bank->bus_width, 4, data);
-
- if (cfi_info->target->endianness == TARGET_LITTLE_ENDIAN)
+
+ if (bank->target->endianness == TARGET_LITTLE_ENDIAN)
return data[0] | data[bank->bus_width] << 8 | data[bank->bus_width * 2] << 16 | data[bank->bus_width * 3] << 24;
else
- return data[bank->bus_width - 1] | data[(2* bank->bus_width) - 1] << 8 |
+ return data[bank->bus_width - 1] | data[(2* bank->bus_width) - 1] << 8 |
data[(3 * bank->bus_width) - 1] << 16 | data[(4 * bank->bus_width) - 1] << 24;
}
void cfi_intel_clear_status_register(flash_bank_t *bank)
{
- cfi_flash_bank_t *cfi_info = bank->driver_priv;
- target_t *target = cfi_info->target;
+ target_t *target = bank->target;
u8 command[8];
-
+
if (target->state != TARGET_HALTED)
{
ERROR("BUG: attempted to clear status register while target wasn't halted");
exit(-1);
}
-
+
cfi_command(bank, 0x50, command);
target->type->write_memory(target, flash_address(bank, 0, 0x0), bank->bus_width, 1, command);
}
u8 cfi_intel_wait_status_busy(flash_bank_t *bank, int timeout)
{
u8 status;
-
+
while ((!((status = cfi_get_u8(bank, 0, 0x0)) & 0x80)) && (timeout-- > 0))
{
DEBUG("status: 0x%x", status);
status = status & 0xfe;
DEBUG("status: 0x%x", status);
-
+
if ((status & 0x80) != 0x80)
{
ERROR("timeout while waiting for WSM to become ready");
ERROR("Error in Block Erasure or Clear Lock-Bits");
if (status & 0x40)
ERROR("Block Erase Suspended");
-
+
cfi_intel_clear_status_register(bank);
}
-
+
return status;
}
+
+int cfi_spansion_wait_status_busy(flash_bank_t *bank, int timeout)
+{
+ u8 status, oldstatus;
+
+ oldstatus = cfi_get_u8(bank, 0, 0x0);
+
+ do {
+ status = cfi_get_u8(bank, 0, 0x0);
+ if ((status ^ oldstatus) & 0x40) {
+ if (status & 0x20) {
+ oldstatus = cfi_get_u8(bank, 0, 0x0);
+ status = cfi_get_u8(bank, 0, 0x0);
+ if ((status ^ oldstatus) & 0x40) {
+ ERROR("dq5 timeout, status: 0x%x", status);
+ return(ERROR_FLASH_OPERATION_FAILED);
+ } else {
+ DEBUG("status: 0x%x", status);
+ return(ERROR_OK);
+ }
+ }
+ } else {
+ DEBUG("status: 0x%x", status);
+ return(ERROR_OK);
+ }
+
+ oldstatus = status;
+ usleep(1000);
+ } while (timeout-- > 0);
+
+ ERROR("timeout, status: 0x%x", status);
+
+ return(ERROR_FLASH_BUSY);
+}
+
int cfi_read_intel_pri_ext(flash_bank_t *bank)
{
cfi_flash_bank_t *cfi_info = bank->driver_priv;
cfi_intel_pri_ext_t *pri_ext = malloc(sizeof(cfi_intel_pri_ext_t));
- target_t *target = cfi_info->target;
+ target_t *target = bank->target;
u8 command[8];
cfi_info->pri_ext = pri_ext;
-
+
pri_ext->pri[0] = cfi_query_u8(bank, 0, cfi_info->pri_addr + 0);
pri_ext->pri[1] = cfi_query_u8(bank, 0, cfi_info->pri_addr + 1);
pri_ext->pri[2] = cfi_query_u8(bank, 0, cfi_info->pri_addr + 2);
-
+
if ((pri_ext->pri[0] != 'P') || (pri_ext->pri[1] != 'R') || (pri_ext->pri[2] != 'I'))
{
cfi_command(bank, 0xf0, command);
target->type->write_memory(target, flash_address(bank, 0, 0x0), bank->bus_width, 1, command);
return ERROR_FLASH_BANK_INVALID;
}
-
+
pri_ext->major_version = cfi_query_u8(bank, 0, cfi_info->pri_addr + 3);
pri_ext->minor_version = cfi_query_u8(bank, 0, cfi_info->pri_addr + 4);
-
+
DEBUG("pri: '%c%c%c', version: %c.%c", pri_ext->pri[0], pri_ext->pri[1], pri_ext->pri[2], pri_ext->major_version, pri_ext->minor_version);
-
+
pri_ext->feature_support = cfi_query_u32(bank, 0, cfi_info->pri_addr + 5);
pri_ext->suspend_cmd_support = cfi_query_u8(bank, 0, cfi_info->pri_addr + 9);
pri_ext->blk_status_reg_mask = cfi_query_u16(bank, 0, cfi_info->pri_addr + 0xa);
-
+
DEBUG("feature_support: 0x%x, suspend_cmd_support: 0x%x, blk_status_reg_mask: 0x%x", pri_ext->feature_support, pri_ext->suspend_cmd_support, pri_ext->blk_status_reg_mask);
-
+
pri_ext->vcc_optimal = cfi_query_u8(bank, 0, cfi_info->pri_addr + 0xc);
pri_ext->vpp_optimal = cfi_query_u8(bank, 0, cfi_info->pri_addr + 0xd);
-
+
DEBUG("Vcc opt: %1.1x.%1.1x, Vpp opt: %1.1x.%1.1x",
(pri_ext->vcc_optimal & 0xf0) >> 4, pri_ext->vcc_optimal & 0x0f,
(pri_ext->vpp_optimal & 0xf0) >> 4, pri_ext->vpp_optimal & 0x0f);
-
+
pri_ext->num_protection_fields = cfi_query_u8(bank, 0, cfi_info->pri_addr + 0xe);
if (pri_ext->num_protection_fields != 1)
{
WARNING("expected one protection register field, but found %i", pri_ext->num_protection_fields);
}
-
+
pri_ext->prot_reg_addr = cfi_query_u16(bank, 0, cfi_info->pri_addr + 0xf);
pri_ext->fact_prot_reg_size = cfi_query_u8(bank, 0, cfi_info->pri_addr + 0x11);
pri_ext->user_prot_reg_size = cfi_query_u8(bank, 0, cfi_info->pri_addr + 0x12);
DEBUG("protection_fields: %i, prot_reg_addr: 0x%x, factory pre-programmed: %i, user programmable: %i", pri_ext->num_protection_fields, pri_ext->prot_reg_addr, 1 << pri_ext->fact_prot_reg_size, 1 << pri_ext->user_prot_reg_size);
-
+
+ return ERROR_OK;
+}
+
+int cfi_read_spansion_pri_ext(flash_bank_t *bank)
+{
+ cfi_flash_bank_t *cfi_info = bank->driver_priv;
+ cfi_spansion_pri_ext_t *pri_ext = malloc(sizeof(cfi_spansion_pri_ext_t));
+ target_t *target = bank->target;
+ u8 command[8];
+
+ cfi_info->pri_ext = pri_ext;
+
+ pri_ext->pri[0] = cfi_query_u8(bank, 0, cfi_info->pri_addr + 0);
+ pri_ext->pri[1] = cfi_query_u8(bank, 0, cfi_info->pri_addr + 1);
+ pri_ext->pri[2] = cfi_query_u8(bank, 0, cfi_info->pri_addr + 2);
+
+ if ((pri_ext->pri[0] != 'P') || (pri_ext->pri[1] != 'R') || (pri_ext->pri[2] != 'I'))
+ {
+ cfi_command(bank, 0xf0, command);
+ target->type->write_memory(target, flash_address(bank, 0, 0x0), bank->bus_width, 1, command);
+ return ERROR_FLASH_BANK_INVALID;
+ }
+
+ pri_ext->major_version = cfi_query_u8(bank, 0, cfi_info->pri_addr + 3);
+ pri_ext->minor_version = cfi_query_u8(bank, 0, cfi_info->pri_addr + 4);
+
+ DEBUG("pri: '%c%c%c', version: %c.%c", pri_ext->pri[0], pri_ext->pri[1], pri_ext->pri[2], pri_ext->major_version, pri_ext->minor_version);
+
+ pri_ext->SiliconRevision = cfi_query_u8(bank, 0, cfi_info->pri_addr + 5);
+ pri_ext->EraseSuspend = cfi_query_u8(bank, 0, cfi_info->pri_addr + 6);
+ pri_ext->BlkProt = cfi_query_u8(bank, 0, cfi_info->pri_addr + 7);
+ pri_ext->TmpBlkUnprotect = cfi_query_u8(bank, 0, cfi_info->pri_addr + 8);
+ pri_ext->BlkProtUnprot = cfi_query_u8(bank, 0, cfi_info->pri_addr + 9);
+ pri_ext->SimultaneousOps = cfi_query_u8(bank, 0, cfi_info->pri_addr + 10);
+ pri_ext->BurstMode = cfi_query_u8(bank, 0, cfi_info->pri_addr + 11);
+ pri_ext->PageMode = cfi_query_u8(bank, 0, cfi_info->pri_addr + 12);
+ pri_ext->VppMin = cfi_query_u8(bank, 0, cfi_info->pri_addr + 13);
+ pri_ext->VppMax = cfi_query_u8(bank, 0, cfi_info->pri_addr + 14);
+ pri_ext->TopBottom = cfi_query_u8(bank, 0, cfi_info->pri_addr + 15);
+
+ DEBUG("Silicon Revision: 0x%x, Erase Suspend: 0x%x, Block protect: 0x%x", pri_ext->SiliconRevision,
+ pri_ext->EraseSuspend, pri_ext->BlkProt);
+
+ DEBUG("Temporary Unprotect: 0x%x, Block Protect Scheme: 0x%x, Simultaneous Ops: 0x%x", pri_ext->TmpBlkUnprotect,
+ pri_ext->BlkProtUnprot, pri_ext->SimultaneousOps);
+
+ DEBUG("Burst Mode: 0x%x, Page Mode: 0x%x, ", pri_ext->BurstMode, pri_ext->PageMode);
+
+
+ DEBUG("Vpp min: %2.2d.%1.1d, Vpp max: %2.2d.%1.1x",
+ (pri_ext->VppMin & 0xf0) >> 4, pri_ext->VppMin & 0x0f,
+ (pri_ext->VppMax & 0xf0) >> 4, pri_ext->VppMax & 0x0f);
+
+ DEBUG("WP# protection 0x%x", pri_ext->TopBottom);
+
+ /* default values for implementation specific workarounds */
+ pri_ext->_unlock1 = cfi_unlock_addresses[CFI_UNLOCK_555_2AA].unlock1;
+ pri_ext->_unlock2 = cfi_unlock_addresses[CFI_UNLOCK_555_2AA].unlock2;
+ pri_ext->_reversed_geometry = 0;
+
+ return ERROR_OK;
+}
+
+int cfi_read_atmel_pri_ext(flash_bank_t *bank)
+{
+ cfi_atmel_pri_ext_t atmel_pri_ext;
+ cfi_flash_bank_t *cfi_info = bank->driver_priv;
+ cfi_spansion_pri_ext_t *pri_ext = malloc(sizeof(cfi_spansion_pri_ext_t));
+ target_t *target = bank->target;
+ u8 command[8];
+
+ /* ATMEL devices use the same CFI primary command set (0x2) as AMD/Spansion,
+ * but a different primary extended query table.
+ * We read the atmel table, and prepare a valid AMD/Spansion query table.
+ */
+
+ memset(pri_ext, 0, sizeof(cfi_spansion_pri_ext_t));
+
+ cfi_info->pri_ext = pri_ext;
+
+ atmel_pri_ext.pri[0] = cfi_query_u8(bank, 0, cfi_info->pri_addr + 0);
+ atmel_pri_ext.pri[1] = cfi_query_u8(bank, 0, cfi_info->pri_addr + 1);
+ atmel_pri_ext.pri[2] = cfi_query_u8(bank, 0, cfi_info->pri_addr + 2);
+
+ if ((atmel_pri_ext.pri[0] != 'P') || (atmel_pri_ext.pri[1] != 'R') || (atmel_pri_ext.pri[2] != 'I'))
+ {
+ cfi_command(bank, 0xf0, command);
+ target->type->write_memory(target, flash_address(bank, 0, 0x0), bank->bus_width, 1, command);
+ return ERROR_FLASH_BANK_INVALID;
+ }
+
+ pri_ext->pri[0] = atmel_pri_ext.pri[0];
+ pri_ext->pri[1] = atmel_pri_ext.pri[1];
+ pri_ext->pri[2] = atmel_pri_ext.pri[2];
+
+ atmel_pri_ext.major_version = cfi_query_u8(bank, 0, cfi_info->pri_addr + 3);
+ atmel_pri_ext.minor_version = cfi_query_u8(bank, 0, cfi_info->pri_addr + 4);
+
+ DEBUG("pri: '%c%c%c', version: %c.%c", atmel_pri_ext.pri[0], atmel_pri_ext.pri[1], atmel_pri_ext.pri[2], atmel_pri_ext.major_version, atmel_pri_ext.minor_version);
+
+ pri_ext->major_version = atmel_pri_ext.major_version;
+ pri_ext->minor_version = atmel_pri_ext.minor_version;
+
+ atmel_pri_ext.features = cfi_query_u8(bank, 0, cfi_info->pri_addr + 5);
+ atmel_pri_ext.bottom_boot = cfi_query_u8(bank, 0, cfi_info->pri_addr + 6);
+ atmel_pri_ext.burst_mode = cfi_query_u8(bank, 0, cfi_info->pri_addr + 7);
+ atmel_pri_ext.page_mode = cfi_query_u8(bank, 0, cfi_info->pri_addr + 8);
+
+ DEBUG("features: 0x%2.2x, bottom_boot: 0x%2.2x, burst_mode: 0x%2.2x, page_mode: 0x%2.2x",
+ atmel_pri_ext.features, atmel_pri_ext.bottom_boot, atmel_pri_ext.burst_mode, atmel_pri_ext.page_mode);
+
+ if (atmel_pri_ext.features & 0x02)
+ pri_ext->EraseSuspend = 2;
+
+ if (atmel_pri_ext.bottom_boot)
+ pri_ext->TopBottom = 2;
+ else
+ pri_ext->TopBottom = 3;
+
+ pri_ext->_unlock1 = cfi_unlock_addresses[CFI_UNLOCK_555_2AA].unlock1;
+ pri_ext->_unlock2 = cfi_unlock_addresses[CFI_UNLOCK_555_2AA].unlock2;
+
+ return ERROR_OK;
+}
+
+int cfi_read_0002_pri_ext(flash_bank_t *bank)
+{
+ cfi_flash_bank_t *cfi_info = bank->driver_priv;
+
+ if (cfi_info->manufacturer == CFI_MFR_ATMEL)
+ {
+ return cfi_read_atmel_pri_ext(bank);
+ }
+ else
+ {
+ return cfi_read_spansion_pri_ext(bank);
+ }
+}
+
+int cfi_spansion_info(struct flash_bank_s *bank, char *buf, int buf_size)
+{
+ int printed;
+ cfi_flash_bank_t *cfi_info = bank->driver_priv;
+ cfi_spansion_pri_ext_t *pri_ext = cfi_info->pri_ext;
+
+ printed = snprintf(buf, buf_size, "\nSpansion primary algorithm extend information:\n");
+ buf += printed;
+ buf_size -= printed;
+
+ printed = snprintf(buf, buf_size, "pri: '%c%c%c', version: %c.%c\n", pri_ext->pri[0],
+ pri_ext->pri[1], pri_ext->pri[2],
+ pri_ext->major_version, pri_ext->minor_version);
+ buf += printed;
+ buf_size -= printed;
+
+ printed = snprintf(buf, buf_size, "Silicon Rev.: 0x%x, Address Sensitive unlock: 0x%x\n",
+ (pri_ext->SiliconRevision) >> 2,
+ (pri_ext->SiliconRevision) & 0x03);
+ buf += printed;
+ buf_size -= printed;
+
+ printed = snprintf(buf, buf_size, "Erase Suspend: 0x%x, Sector Protect: 0x%x\n",
+ pri_ext->EraseSuspend,
+ pri_ext->BlkProt);
+ buf += printed;
+ buf_size -= printed;
+
+ printed = snprintf(buf, buf_size, "VppMin: %2.2d.%1.1x, VppMax: %2.2d.%1.1x\n",
+ (pri_ext->VppMin & 0xf0) >> 4, pri_ext->VppMin & 0x0f,
+ (pri_ext->VppMax & 0xf0) >> 4, pri_ext->VppMax & 0x0f);
+
return ERROR_OK;
}
int printed;
cfi_flash_bank_t *cfi_info = bank->driver_priv;
cfi_intel_pri_ext_t *pri_ext = cfi_info->pri_ext;
-
+
printed = snprintf(buf, buf_size, "\nintel primary algorithm extend information:\n");
buf += printed;
buf_size -= printed;
-
+
printed = snprintf(buf, buf_size, "pri: '%c%c%c', version: %c.%c\n", pri_ext->pri[0], pri_ext->pri[1], pri_ext->pri[2], pri_ext->major_version, pri_ext->minor_version);
buf += printed;
buf_size -= printed;
-
+
printed = snprintf(buf, buf_size, "feature_support: 0x%x, suspend_cmd_support: 0x%x, blk_status_reg_mask: 0x%x\n", pri_ext->feature_support, pri_ext->suspend_cmd_support, pri_ext->blk_status_reg_mask);
buf += printed;
buf_size -= printed;
-
+
printed = snprintf(buf, buf_size, "Vcc opt: %1.1x.%1.1x, Vpp opt: %1.1x.%1.1x\n",
(pri_ext->vcc_optimal & 0xf0) >> 4, pri_ext->vcc_optimal & 0x0f,
(pri_ext->vpp_optimal & 0xf0) >> 4, pri_ext->vpp_optimal & 0x0f);
buf += printed;
buf_size -= printed;
-
+
printed = snprintf(buf, buf_size, "protection_fields: %i, prot_reg_addr: 0x%x, factory pre-programmed: %i, user programmable: %i\n", pri_ext->num_protection_fields, pri_ext->prot_reg_addr, 1 << pri_ext->fact_prot_reg_size, 1 << pri_ext->user_prot_reg_size);
-
+
return ERROR_OK;
}
int cfi_register_commands(struct command_context_s *cmd_ctx)
{
- command_t *cfi_cmd = register_command(cmd_ctx, NULL, "cfi", NULL, COMMAND_ANY, NULL);
- /*
+ /*command_t *cfi_cmd = */
+ register_command(cmd_ctx, NULL, "cfi", NULL, COMMAND_ANY, "flash bank cfi <base> <size> <chip_width> <bus_width> <targetNum> [jedec_probe/x16_as_x8]");
+ /*
register_command(cmd_ctx, cfi_cmd, "part_id", cfi_handle_part_id_command, COMMAND_EXEC,
"print part id of cfi flash bank <num>");
*/
return ERROR_OK;
}
-/* flash_bank cfi <base> <size> <chip_width> <bus_width> <target#>
+/* flash_bank cfi <base> <size> <chip_width> <bus_width> <target#> [options]
*/
int cfi_flash_bank_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc, struct flash_bank_s *bank)
{
cfi_flash_bank_t *cfi_info;
-
+ int i;
+
if (argc < 6)
{
WARNING("incomplete flash_bank cfi configuration");
return ERROR_FLASH_BANK_INVALID;
}
-
+
if ((strtoul(args[4], NULL, 0) > CFI_MAX_CHIP_WIDTH)
|| (strtoul(args[3], NULL, 0) > CFI_MAX_BUS_WIDTH))
{
- ERROR("chip and bus width have to specified in byte");
+ ERROR("chip and bus width have to specified in bytes");
return ERROR_FLASH_BANK_INVALID;
}
-
+
cfi_info = malloc(sizeof(cfi_flash_bank_t));
+ cfi_info->probed = 0;
bank->driver_priv = cfi_info;
-
- cfi_info->target = get_target_by_num(strtoul(args[5], NULL, 0));
- if (!cfi_info->target)
+
+ cfi_info->write_algorithm = NULL;
+ cfi_info->erase_check_algorithm = NULL;
+
+ cfi_info->x16_as_x8 = 0;
+ cfi_info->jedec_probe = 0;
+ cfi_info->not_cfi = 0;
+
+ for (i = 6; i < argc; i++)
{
- ERROR("no target '%i' configured", args[5]);
- exit(-1);
+ if (strcmp(args[i], "x16_as_x8") == 0)
+ {
+ cfi_info->x16_as_x8 = 1;
+ }
+ else if (strcmp(args[i], "jedec_probe") == 0)
+ {
+ cfi_info->jedec_probe = 1;
+ }
}
-
+
cfi_info->write_algorithm = NULL;
/* bank wasn't probed yet */
cfi_info->qry[0] = -1;
-
+
return ERROR_OK;
}
int cfi_intel_erase(struct flash_bank_s *bank, int first, int last)
{
cfi_flash_bank_t *cfi_info = bank->driver_priv;
- cfi_intel_pri_ext_t *pri_ext = cfi_info->pri_ext;
- target_t *target = cfi_info->target;
+ target_t *target = bank->target;
u8 command[8];
int i;
-
+
cfi_intel_clear_status_register(bank);
for (i = first; i <= last; i++)
{
cfi_command(bank, 0x20, command);
target->type->write_memory(target, flash_address(bank, i, 0x0), bank->bus_width, 1, command);
-
+
cfi_command(bank, 0xd0, command);
target->type->write_memory(target, flash_address(bank, i, 0x0), bank->bus_width, 1, command);
-
+
if (cfi_intel_wait_status_busy(bank, 1000 * (1 << cfi_info->block_erase_timeout_typ)) == 0x80)
bank->sectors[i].is_erased = 1;
else
{
cfi_command(bank, 0xff, command);
target->type->write_memory(target, flash_address(bank, 0, 0x0), bank->bus_width, 1, command);
-
+
ERROR("couldn't erase block %i of flash bank at base 0x%x", i, bank->base);
return ERROR_FLASH_OPERATION_FAILED;
}
}
-
+
cfi_command(bank, 0xff, command);
target->type->write_memory(target, flash_address(bank, 0, 0x0), bank->bus_width, 1, command);
-
- return ERROR_OK;
-}
-
-int cfi_erase(struct flash_bank_s *bank, int first, int last)
-{
- cfi_flash_bank_t *cfi_info = bank->driver_priv;
-
- if (cfi_info->target->state != TARGET_HALTED)
- {
- return ERROR_TARGET_NOT_HALTED;
- }
-
- if ((first < 0) || (last < first) || (last >= bank->num_sectors))
- {
- return ERROR_FLASH_SECTOR_INVALID;
- }
- if (cfi_info->qry[0] != 'Q')
- return ERROR_FLASH_BANK_NOT_PROBED;
-
- switch(cfi_info->pri_id)
- {
- case 1:
- case 3:
- return cfi_intel_erase(bank, first, last);
- break;
- default:
- ERROR("cfi primary command set %i unsupported", cfi_info->pri_id);
- break;
- }
-
return ERROR_OK;
}
-int cfi_intel_protect(struct flash_bank_s *bank, int set, int first, int last)
+int cfi_spansion_erase(struct flash_bank_s *bank, int first, int last)
{
cfi_flash_bank_t *cfi_info = bank->driver_priv;
- cfi_intel_pri_ext_t *pri_ext = cfi_info->pri_ext;
- target_t *target = cfi_info->target;
+ cfi_spansion_pri_ext_t *pri_ext = cfi_info->pri_ext;
+ target_t *target = bank->target;
u8 command[8];
- int retry = 0;
int i;
-
- /* if the device supports neither legacy lock/unlock (bit 3) nor
+
+ for (i = first; i <= last; i++)
+ {
+ cfi_command(bank, 0xaa, command);
+ target->type->write_memory(target, flash_address(bank, 0, pri_ext->_unlock1), bank->bus_width, 1, command);
+
+ cfi_command(bank, 0x55, command);
+ target->type->write_memory(target, flash_address(bank, 0, pri_ext->_unlock2), bank->bus_width, 1, command);
+
+ cfi_command(bank, 0x80, command);
+ target->type->write_memory(target, flash_address(bank, 0, pri_ext->_unlock1), bank->bus_width, 1, command);
+
+ cfi_command(bank, 0xaa, command);
+ target->type->write_memory(target, flash_address(bank, 0, pri_ext->_unlock1), bank->bus_width, 1, command);
+
+ cfi_command(bank, 0x55, command);
+ target->type->write_memory(target, flash_address(bank, 0, pri_ext->_unlock2), bank->bus_width, 1, command);
+
+ cfi_command(bank, 0x30, command);
+ target->type->write_memory(target, flash_address(bank, i, 0x0), bank->bus_width, 1, command);
+
+ if (cfi_spansion_wait_status_busy(bank, 1000 * (1 << cfi_info->block_erase_timeout_typ)) == ERROR_OK)
+ bank->sectors[i].is_erased = 1;
+ else
+ {
+ cfi_command(bank, 0xf0, command);
+ target->type->write_memory(target, flash_address(bank, 0, 0x0), bank->bus_width, 1, command);
+
+ ERROR("couldn't erase block %i of flash bank at base 0x%x", i, bank->base);
+ return ERROR_FLASH_OPERATION_FAILED;
+ }
+ }
+
+ cfi_command(bank, 0xf0, command);
+ target->type->write_memory(target, flash_address(bank, 0, 0x0), bank->bus_width, 1, command);
+
+ return ERROR_OK;
+}
+
+int cfi_erase(struct flash_bank_s *bank, int first, int last)
+{
+ cfi_flash_bank_t *cfi_info = bank->driver_priv;
+
+ if (bank->target->state != TARGET_HALTED)
+ {
+ return ERROR_TARGET_NOT_HALTED;
+ }
+
+ if ((first < 0) || (last < first) || (last >= bank->num_sectors))
+ {
+ return ERROR_FLASH_SECTOR_INVALID;
+ }
+
+ if (cfi_info->qry[0] != 'Q')
+ return ERROR_FLASH_BANK_NOT_PROBED;
+
+ switch(cfi_info->pri_id)
+ {
+ case 1:
+ case 3:
+ return cfi_intel_erase(bank, first, last);
+ break;
+ case 2:
+ return cfi_spansion_erase(bank, first, last);
+ break;
+ default:
+ ERROR("cfi primary command set %i unsupported", cfi_info->pri_id);
+ break;
+ }
+
+ return ERROR_OK;
+}
+
+int cfi_intel_protect(struct flash_bank_s *bank, int set, int first, int last)
+{
+ cfi_flash_bank_t *cfi_info = bank->driver_priv;
+ cfi_intel_pri_ext_t *pri_ext = cfi_info->pri_ext;
+ target_t *target = bank->target;
+ u8 command[8];
+ int retry = 0;
+ int i;
+
+ /* if the device supports neither legacy lock/unlock (bit 3) nor
* instant individual block locking (bit 5).
*/
if (!(pri_ext->feature_support & 0x28))
return ERROR_FLASH_OPERATION_FAILED;
-
+
cfi_intel_clear_status_register(bank);
for (i = first; i <= last; i++)
cfi_command(bank, 0x90, command);
target->type->write_memory(target, flash_address(bank, 0, 0x55), bank->bus_width, 1, command);
block_status = cfi_get_u8(bank, i, 0x2);
-
+
if ((block_status & 0x1) != set)
{
ERROR("couldn't change block lock status (set = %i, block_status = 0x%2.2x)", set, block_status);
cfi_command(bank, 0x70, command);
target->type->write_memory(target, flash_address(bank, 0, 0x55), bank->bus_width, 1, command);
cfi_intel_wait_status_busy(bank, 10);
-
+
if (retry > 10)
return ERROR_FLASH_OPERATION_FAILED;
else
{
i--;
- retry++;
+ retry++;
}
- }
+ }
}
}
-
+
/* if the device doesn't support individual block lock bits set/clear,
* all blocks have been unlocked in parallel, so we set those that should be protected
*/
{
for (i = 0; i < bank->num_sectors; i++)
{
- cfi_intel_clear_status_register(bank);
- cfi_command(bank, 0x60, command);
- target->type->write_memory(target, flash_address(bank, i, 0x0), bank->bus_width, 1, command);
if (bank->sectors[i].is_protected == 1)
{
+ cfi_intel_clear_status_register(bank);
+
+ cfi_command(bank, 0x60, command);
+ target->type->write_memory(target, flash_address(bank, i, 0x0), bank->bus_width, 1, command);
+
cfi_command(bank, 0x01, command);
target->type->write_memory(target, flash_address(bank, i, 0x0), bank->bus_width, 1, command);
+
+ cfi_intel_wait_status_busy(bank, 100);
}
-
- cfi_intel_wait_status_busy(bank, 100);
}
}
-
+
cfi_command(bank, 0xff, command);
target->type->write_memory(target, flash_address(bank, 0, 0x0), bank->bus_width, 1, command);
-
+
return ERROR_OK;
}
int cfi_protect(struct flash_bank_s *bank, int set, int first, int last)
{
cfi_flash_bank_t *cfi_info = bank->driver_priv;
-
- if (cfi_info->target->state != TARGET_HALTED)
+
+ if (bank->target->state != TARGET_HALTED)
{
return ERROR_TARGET_NOT_HALTED;
}
-
+
if ((first < 0) || (last < first) || (last >= bank->num_sectors))
{
return ERROR_FLASH_SECTOR_INVALID;
}
-
+
if (cfi_info->qry[0] != 'Q')
return ERROR_FLASH_BANK_NOT_PROBED;
-
+
switch(cfi_info->pri_id)
{
case 1:
ERROR("cfi primary command set %i unsupported", cfi_info->pri_id);
break;
}
-
+
return ERROR_OK;
}
-void cfi_add_byte(struct flash_bank_s *bank, u8 *word, u8 byte)
+/* FIXME Replace this by a simple memcpy() - still unsure about sideeffects */
+static void cfi_add_byte(struct flash_bank_s *bank, u8 *word, u8 byte)
{
- cfi_flash_bank_t *cfi_info = bank->driver_priv;
- target_t *target = cfi_info->target;
+ //target_t *target = bank->target;
int i;
-
- if (target->endianness == TARGET_LITTLE_ENDIAN)
- {
+
+ // NOTE:
+ // The data to flash must not be changed in endian! We write a bytestrem in
+ // target byte order already. Only the control and status byte lane of the flash
+ // WSM is interpreted by the CPU in different ways, when read a u16 or u32
+ // word (data seems to be in the upper or lower byte lane for u16 accesses).
+
+ //if (target->endianness == TARGET_LITTLE_ENDIAN)
+ //{
/* shift bytes */
for (i = 0; i < bank->bus_width - 1; i++)
word[i] = word[i + 1];
word[bank->bus_width - 1] = byte;
- }
- else
+ //}
+ //else
+ //{
+ // /* shift bytes */
+ // for (i = bank->bus_width - 1; i > 0; i--)
+ // word[i] = word[i - 1];
+ // word[0] = byte;
+ //}
+}
+
+/* Convert code image to target endian */
+/* FIXME create general block conversion fcts in target.c?) */ static
+void cfi_fix_code_endian(target_t *target, u32 *dest, const u32 *src, u32 count)
+{
+ u32 i;
+ for (i=0; i< count; i++)
{
- /* shift bytes */
- for (i = bank->bus_width - 1; i > 0; i--)
- word[i] = word[i - 1];
- word[0] = byte;
+ target_buffer_set_u32(target, (u8*)dest, *src);
+ dest++;
+ src++;
}
}
int cfi_intel_write_block(struct flash_bank_s *bank, u8 *buffer, u32 address, u32 count)
{
cfi_flash_bank_t *cfi_info = bank->driver_priv;
- cfi_intel_pri_ext_t *pri_ext = cfi_info->pri_ext;
- target_t *target = cfi_info->target;
+ target_t *target = bank->target;
reg_param_t reg_params[7];
armv4_5_algorithm_t armv4_5_info;
working_area_t *source;
u32 buffer_size = 32768;
- u8 write_command[CFI_MAX_BUS_WIDTH];
- u8 busy_pattern[CFI_MAX_BUS_WIDTH];
- u8 error_pattern[CFI_MAX_BUS_WIDTH];
- int i;
- int retval;
-
+ u8 write_command_buf[CFI_MAX_BUS_WIDTH];
+ u8 busy_pattern_buf[CFI_MAX_BUS_WIDTH];
+ u8 error_pattern_buf[CFI_MAX_BUS_WIDTH];
+ u32 write_command_val, busy_pattern_val, error_pattern_val;
+
/* algorithm register usage:
* r0: source address (in RAM)
* r1: target address (in Flash)
* r5: busy test pattern
* r6: error test pattern
*/
-
- u32 word_32_code[] = {
+
+ static const u32 word_32_code[] = {
0xe4904004, /* loop: ldr r4, [r0], #4 */
0xe5813000, /* str r3, [r1] */
0xe5814000, /* str r4, [r1] */
0x0a000001, /* beq done */
0xe2811004, /* add r1, r1 #4 */
0xeafffff2, /* b loop */
- 0xeafffffe, /* done: b -2 */
+ 0xeafffffe /* done: b -2 */
};
-
- u32 word_16_code[] = {
+
+ static const u32 word_16_code[] = {
0xe0d040b2, /* loop: ldrh r4, [r0], #2 */
0xe1c130b0, /* strh r3, [r1] */
0xe1c140b0, /* strh r4, [r1] */
0x0a000001, /* beq done */
0xe2811002, /* add r1, r1 #2 */
0xeafffff2, /* b loop */
- 0xeafffffe, /* done: b -2 */
+ 0xeafffffe /* done: b -2 */
};
-
- u32 word_8_code[] = {
+
+ static const u32 word_8_code[] = {
0xe4d04001, /* loop: ldrb r4, [r0], #1 */
0xe5c13000, /* strb r3, [r1] */
0xe5c14000, /* strb r4, [r1] */
0x0a000001, /* beq done */
0xe2811001, /* add r1, r1 #1 */
0xeafffff2, /* b loop */
- 0xeafffffe, /* done: b -2 */
+ 0xeafffffe /* done: b -2 */
};
-
+ u32 target_code[CFI_MAX_INTEL_CODESIZE];
+ const u32 *target_code_src;
+ int target_code_size;
+ int retval = ERROR_OK;
+
+
cfi_intel_clear_status_register(bank);
-
+
armv4_5_info.common_magic = ARMV4_5_COMMON_MAGIC;
armv4_5_info.core_mode = ARMV4_5_MODE_SVC;
armv4_5_info.core_state = ARMV4_5_STATE_ARM;
-
+
+ /* If we are setting up the write_algorith, we need target_code_src */
+ /* if not we only need target_code_size. */
+ /* */
+ /* However, we don't want to create multiple code paths, so we */
+ /* do the unecessary evaluation of target_code_src, which the */
+ /* compiler will probably nicely optimize away if not needed */
+
+ /* prepare algorithm code for target endian */
+ switch (bank->bus_width)
+ {
+ case 1 :
+ target_code_src = word_8_code;
+ target_code_size = sizeof(word_8_code);
+ break;
+ case 2 :
+ target_code_src = word_16_code;
+ target_code_size = sizeof(word_16_code);
+ break;
+ case 4 :
+ target_code_src = word_32_code;
+ target_code_size = sizeof(word_32_code);
+ break;
+ default:
+ ERROR("Unsupported bank buswidth %d, can't do block memory writes", bank->bus_width);
+ return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
+ }
+
/* flash write code */
if (!cfi_info->write_algorithm)
{
- if (target_alloc_working_area(target, 4 * 14, &cfi_info->write_algorithm) != ERROR_OK)
+ if ( target_code_size > sizeof(target_code) )
{
- WARNING("no working area available, can't do block memory writes");
+ WARNING("Internal error - target code buffer to small. Increase CFI_MAX_INTEL_CODESIZE and recompile.");
+ return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
+ }
+ cfi_fix_code_endian(target, target_code, target_code_src, target_code_size);
+
+ /* Get memory for block write handler */
+ retval = target_alloc_working_area(target, target_code_size, &cfi_info->write_algorithm);
+ if (retval != ERROR_OK)
+ {
+ WARNING("No working area available, can't do block memory writes");
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
};
-
+
/* write algorithm code to working area */
+ retval = target_write_buffer(target, cfi_info->write_algorithm->address, target_code_size, (u8*)target_code);
+ if (retval != ERROR_OK)
+ {
+ ERROR("Unable to write block write code to target");
+ goto cleanup;
+ }
+ }
+
+ /* Get a workspace buffer for the data to flash starting with 32k size.
+ Half size until buffer would be smaller 256 Bytem then fail back */
+ /* FIXME Why 256 bytes, why not 32 bytes (smallest flash write page */
+ while (target_alloc_working_area(target, buffer_size, &source) != ERROR_OK)
+ {
+ buffer_size /= 2;
+ if (buffer_size <= 256)
+ {
+ WARNING("no large enough working area available, can't do block memory writes");
+ retval = ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
+ goto cleanup;
+ }
+ };
+
+ /* setup algo registers */
+ init_reg_param(®_params[0], "r0", 32, PARAM_OUT);
+ init_reg_param(®_params[1], "r1", 32, PARAM_OUT);
+ init_reg_param(®_params[2], "r2", 32, PARAM_OUT);
+ init_reg_param(®_params[3], "r3", 32, PARAM_OUT);
+ init_reg_param(®_params[4], "r4", 32, PARAM_IN);
+ init_reg_param(®_params[5], "r5", 32, PARAM_OUT);
+ init_reg_param(®_params[6], "r6", 32, PARAM_OUT);
+
+ /* prepare command and status register patterns */
+ cfi_command(bank, 0x40, write_command_buf);
+ cfi_command(bank, 0x80, busy_pattern_buf);
+ cfi_command(bank, 0x7e, error_pattern_buf);
+
+ switch (bank->bus_width)
+ {
+ case 1 :
+ write_command_val = write_command_buf[0];
+ busy_pattern_val = busy_pattern_buf[0];
+ error_pattern_val = error_pattern_buf[0];
+ break;
+ case 2 :
+ write_command_val = target_buffer_get_u16(target, write_command_buf);
+ busy_pattern_val = target_buffer_get_u16(target, busy_pattern_buf);
+ error_pattern_val = target_buffer_get_u16(target, error_pattern_buf);
+ break;
+ case 4 :
+ write_command_val = target_buffer_get_u32(target, write_command_buf);
+ busy_pattern_val = target_buffer_get_u32(target, busy_pattern_buf);
+ error_pattern_val = target_buffer_get_u32(target, error_pattern_buf);
+ break;
+ default :
+ ERROR("Unsupported bank buswidth %d, can't do block memory writes", bank->bus_width);
+ retval = ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
+ goto cleanup;
+ }
+
+ INFO("Using target buffer at 0x%08x and of size 0x%04x", source->address, buffer_size );
+
+ /* Programming main loop */
+ while (count > 0)
+ {
+ u32 thisrun_count = (count > buffer_size) ? buffer_size : count;
+ u32 wsm_error;
+
+ target_write_buffer(target, source->address, thisrun_count, buffer);
+
+ buf_set_u32(reg_params[0].value, 0, 32, source->address);
+ buf_set_u32(reg_params[1].value, 0, 32, address);
+ buf_set_u32(reg_params[2].value, 0, 32, thisrun_count / bank->bus_width);
+
+ buf_set_u32(reg_params[3].value, 0, 32, write_command_val);
+ buf_set_u32(reg_params[5].value, 0, 32, busy_pattern_val);
+ buf_set_u32(reg_params[6].value, 0, 32, error_pattern_val);
+
+ INFO("Write 0x%04x bytes to flash at 0x%08x", thisrun_count, address );
+
+ /* Execute algorithm, assume breakpoint for last instruction */
+ retval = target->type->run_algorithm(target, 0, NULL, 7, reg_params,
+ cfi_info->write_algorithm->address,
+ cfi_info->write_algorithm->address + target_code_size - sizeof(u32),
+ 10000, /* 10s should be enough for max. 32k of data */
+ &armv4_5_info);
+
+ /* On failure try a fall back to direct word writes */
+ if (retval != ERROR_OK)
+ {
+ cfi_intel_clear_status_register(bank);
+ ERROR("Execution of flash algorythm failed. Can't fall back. Please report.");
+ retval = ERROR_FLASH_OPERATION_FAILED;
+ //retval = ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
+ // FIXME To allow fall back or recovery, we must save the actual status
+ // somewhere, so that a higher level code can start recovery.
+ goto cleanup;
+ }
+
+ /* Check return value from algo code */
+ wsm_error = buf_get_u32(reg_params[4].value, 0, 32) & error_pattern_val;
+ if (wsm_error)
+ {
+ /* read status register (outputs debug inforation) */
+ cfi_intel_wait_status_busy(bank, 100);
+ cfi_intel_clear_status_register(bank);
+ retval = ERROR_FLASH_OPERATION_FAILED;
+ goto cleanup;
+ }
+
+ buffer += thisrun_count;
+ address += thisrun_count;
+ count -= thisrun_count;
+ }
+
+ /* free up resources */
+cleanup:
+ if (source)
+ target_free_working_area(target, source);
+
+ if (cfi_info->write_algorithm)
+ {
+ target_free_working_area(target, cfi_info->write_algorithm);
+ cfi_info->write_algorithm = NULL;
+ }
+
+ destroy_reg_param(®_params[0]);
+ destroy_reg_param(®_params[1]);
+ destroy_reg_param(®_params[2]);
+ destroy_reg_param(®_params[3]);
+ destroy_reg_param(®_params[4]);
+ destroy_reg_param(®_params[5]);
+ destroy_reg_param(®_params[6]);
+
+ return retval;
+}
+
+int cfi_spansion_write_block(struct flash_bank_s *bank, u8 *buffer, u32 address, u32 count)
+{
+ cfi_flash_bank_t *cfi_info = bank->driver_priv;
+ cfi_spansion_pri_ext_t *pri_ext = cfi_info->pri_ext;
+ target_t *target = bank->target;
+ reg_param_t reg_params[10];
+ armv4_5_algorithm_t armv4_5_info;
+ working_area_t *source;
+ u32 buffer_size = 32768;
+ u8 write_command[CFI_MAX_BUS_WIDTH];
+ u32 status;
+ int i;
+ int retval;
+ int exit_code = ERROR_OK;
+
+ /* input parameters - */
+ /* R0 = source address */
+ /* R1 = destination address */
+ /* R2 = number of writes */
+ /* R3 = flash write command */
+ /* R4 = constant to mask DQ7 bits (also used for Dq5 with shift) */
+ /* output parameters - */
+ /* R5 = 0x80 ok 0x00 bad */
+ /* temp registers - */
+ /* R6 = value read from flash to test status */
+ /* R7 = holding register */
+ /* unlock registers - */
+ /* R8 = unlock1_addr */
+ /* R9 = unlock1_cmd */
+ /* R10 = unlock2_addr */
+ /* R11 = unlock2_cmd */
+
+ u32 word_32_code[] = {
+ /* 00008100 <sp_32_code>: */
+ 0xe4905004, /* ldr r5, [r0], #4 */
+ 0xe5889000, /* str r9, [r8] */
+ 0xe58ab000, /* str r11, [r10] */
+ 0xe5883000, /* str r3, [r8] */
+ 0xe5815000, /* str r5, [r1] */
+ 0xe1a00000, /* nop */
+ /* */
+ /* 00008110 <sp_32_busy>: */
+ 0xe5916000, /* ldr r6, [r1] */
+ 0xe0257006, /* eor r7, r5, r6 */
+ 0xe0147007, /* ands r7, r4, r7 */
+ 0x0a000007, /* beq 8140 <sp_32_cont> ; b if DQ7 == Data7 */
+ 0xe0166124, /* ands r6, r6, r4, lsr #2 */
+ 0x0afffff9, /* beq 8110 <sp_32_busy> ; b if DQ5 low */
+ 0xe5916000, /* ldr r6, [r1] */
+ 0xe0257006, /* eor r7, r5, r6 */
+ 0xe0147007, /* ands r7, r4, r7 */
+ 0x0a000001, /* beq 8140 <sp_32_cont> ; b if DQ7 == Data7 */
+ 0xe3a05000, /* mov r5, #0 ; 0x0 - return 0x00, error */
+ 0x1a000004, /* bne 8154 <sp_32_done> */
+ /* */
+ /* 00008140 <sp_32_cont>: */
+ 0xe2522001, /* subs r2, r2, #1 ; 0x1 */
+ 0x03a05080, /* moveq r5, #128 ; 0x80 */
+ 0x0a000001, /* beq 8154 <sp_32_done> */
+ 0xe2811004, /* add r1, r1, #4 ; 0x4 */
+ 0xeaffffe8, /* b 8100 <sp_32_code> */
+ /* */
+ /* 00008154 <sp_32_done>: */
+ 0xeafffffe /* b 8154 <sp_32_done> */
+ };
+
+ u32 word_16_code[] = {
+ /* 00008158 <sp_16_code>: */
+ 0xe0d050b2, /* ldrh r5, [r0], #2 */
+ 0xe1c890b0, /* strh r9, [r8] */
+ 0xe1cab0b0, /* strh r11, [r10] */
+ 0xe1c830b0, /* strh r3, [r8] */
+ 0xe1c150b0, /* strh r5, [r1] */
+ 0xe1a00000, /* nop (mov r0,r0) */
+ /* */
+ /* 00008168 <sp_16_busy>: */
+ 0xe1d160b0, /* ldrh r6, [r1] */
+ 0xe0257006, /* eor r7, r5, r6 */
+ 0xe0147007, /* ands r7, r4, r7 */
+ 0x0a000007, /* beq 8198 <sp_16_cont> */
+ 0xe0166124, /* ands r6, r6, r4, lsr #2 */
+ 0x0afffff9, /* beq 8168 <sp_16_busy> */
+ 0xe1d160b0, /* ldrh r6, [r1] */
+ 0xe0257006, /* eor r7, r5, r6 */
+ 0xe0147007, /* ands r7, r4, r7 */
+ 0x0a000001, /* beq 8198 <sp_16_cont> */
+ 0xe3a05000, /* mov r5, #0 ; 0x0 */
+ 0x1a000004, /* bne 81ac <sp_16_done> */
+ /* */
+ /* 00008198 <sp_16_cont>: */
+ 0xe2522001, /* subs r2, r2, #1 ; 0x1 */
+ 0x03a05080, /* moveq r5, #128 ; 0x80 */
+ 0x0a000001, /* beq 81ac <sp_16_done> */
+ 0xe2811002, /* add r1, r1, #2 ; 0x2 */
+ 0xeaffffe8, /* b 8158 <sp_16_code> */
+ /* */
+ /* 000081ac <sp_16_done>: */
+ 0xeafffffe /* b 81ac <sp_16_done> */
+ };
+
+ u32 word_8_code[] = {
+ /* 000081b0 <sp_16_code_end>: */
+ 0xe4d05001, /* ldrb r5, [r0], #1 */
+ 0xe5c89000, /* strb r9, [r8] */
+ 0xe5cab000, /* strb r11, [r10] */
+ 0xe5c83000, /* strb r3, [r8] */
+ 0xe5c15000, /* strb r5, [r1] */
+ 0xe1a00000, /* nop (mov r0,r0) */
+ /* */
+ /* 000081c0 <sp_8_busy>: */
+ 0xe5d16000, /* ldrb r6, [r1] */
+ 0xe0257006, /* eor r7, r5, r6 */
+ 0xe0147007, /* ands r7, r4, r7 */
+ 0x0a000007, /* beq 81f0 <sp_8_cont> */
+ 0xe0166124, /* ands r6, r6, r4, lsr #2 */
+ 0x0afffff9, /* beq 81c0 <sp_8_busy> */
+ 0xe5d16000, /* ldrb r6, [r1] */
+ 0xe0257006, /* eor r7, r5, r6 */
+ 0xe0147007, /* ands r7, r4, r7 */
+ 0x0a000001, /* beq 81f0 <sp_8_cont> */
+ 0xe3a05000, /* mov r5, #0 ; 0x0 */
+ 0x1a000004, /* bne 8204 <sp_8_done> */
+ /* */
+ /* 000081f0 <sp_8_cont>: */
+ 0xe2522001, /* subs r2, r2, #1 ; 0x1 */
+ 0x03a05080, /* moveq r5, #128 ; 0x80 */
+ 0x0a000001, /* beq 8204 <sp_8_done> */
+ 0xe2811001, /* add r1, r1, #1 ; 0x1 */
+ 0xeaffffe8, /* b 81b0 <sp_16_code_end> */
+ /* */
+ /* 00008204 <sp_8_done>: */
+ 0xeafffffe /* b 8204 <sp_8_done> */
+ };
+
+ armv4_5_info.common_magic = ARMV4_5_COMMON_MAGIC;
+ armv4_5_info.core_mode = ARMV4_5_MODE_SVC;
+ armv4_5_info.core_state = ARMV4_5_STATE_ARM;
+
+ /* flash write code */
+ if (!cfi_info->write_algorithm)
+ {
+ u8 *code_p;
+
+ /* convert bus-width dependent algorithm code to correct endiannes */
if (bank->bus_width == 1)
{
- target_write_buffer(target, cfi_info->write_algorithm->address, 14 * 4, (u8*)word_8_code);
+ code_p = malloc(24 * 4);
+
+ for (i = 0; i < 24; i++)
+ target_buffer_set_u32(target, code_p + (i*4), word_8_code[i]);
}
else if (bank->bus_width == 2)
{
- target_write_buffer(target, cfi_info->write_algorithm->address, 14 * 4, (u8*)word_16_code);
- }
+ code_p = malloc(24 * 4);
+
+ for (i = 0; i < 24; i++)
+ target_buffer_set_u32(target, code_p + (i*4), word_16_code[i]);
+ }
else if (bank->bus_width == 4)
{
- target_write_buffer(target, cfi_info->write_algorithm->address, 14 * 4, (u8*)word_32_code);
+ code_p = malloc(24 * 4);
+
+ for (i = 0; i < 24; i++)
+ target_buffer_set_u32(target, code_p + (i*4), word_32_code[i]);
}
else
{
return ERROR_FLASH_OPERATION_FAILED;
}
+
+ /* allocate working area */
+ retval=target_alloc_working_area(target, 24 * 4,
+ &cfi_info->write_algorithm);
+ if (retval != ERROR_OK)
+ {
+ return retval;
+ }
+
+ /* write algorithm code to working area */
+ target_write_buffer(target, cfi_info->write_algorithm->address, 24 * 4, code_p);
+
+ free(code_p);
}
-
+
while (target_alloc_working_area(target, buffer_size, &source) != ERROR_OK)
{
buffer_size /= 2;
/* if we already allocated the writing code, but failed to get a buffer, free the algorithm */
if (cfi_info->write_algorithm)
target_free_working_area(target, cfi_info->write_algorithm);
-
- WARNING("no large enough working area available, can't do block memory writes");
+
+ WARNING("not enough working area available, can't do block memory writes");
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
}
};
init_reg_param(®_params[1], "r1", 32, PARAM_OUT);
init_reg_param(®_params[2], "r2", 32, PARAM_OUT);
init_reg_param(®_params[3], "r3", 32, PARAM_OUT);
- init_reg_param(®_params[4], "r4", 32, PARAM_IN);
- init_reg_param(®_params[5], "r5", 32, PARAM_OUT);
- init_reg_param(®_params[6], "r6", 32, PARAM_OUT);
-
- cfi_command(bank, 0x40, write_command);
- cfi_command(bank, 0x80, busy_pattern);
- cfi_command(bank, 0x7e, error_pattern);
+ init_reg_param(®_params[4], "r4", 32, PARAM_OUT);
+ init_reg_param(®_params[5], "r5", 32, PARAM_IN);
+ init_reg_param(®_params[6], "r8", 32, PARAM_OUT);
+ init_reg_param(®_params[7], "r9", 32, PARAM_OUT);
+ init_reg_param(®_params[8], "r10", 32, PARAM_OUT);
+ init_reg_param(®_params[9], "r11", 32, PARAM_OUT);
while (count > 0)
{
u32 thisrun_count = (count > buffer_size) ? buffer_size : count;
-
+
target_write_buffer(target, source->address, thisrun_count, buffer);
-
+
buf_set_u32(reg_params[0].value, 0, 32, source->address);
buf_set_u32(reg_params[1].value, 0, 32, address);
buf_set_u32(reg_params[2].value, 0, 32, thisrun_count / bank->bus_width);
- buf_set_u32(reg_params[3].value, 0, 32, target_buffer_get_u32(target, write_command));
- buf_set_u32(reg_params[5].value, 0, 32, target_buffer_get_u32(target, busy_pattern));
- buf_set_u32(reg_params[6].value, 0, 32, target_buffer_get_u32(target, error_pattern));
-
- if ((retval = target->type->run_algorithm(target, 0, NULL, 7, reg_params, cfi_info->write_algorithm->address, cfi_info->write_algorithm->address + (13 * 4), 10000, &armv4_5_info)) != ERROR_OK)
- {
- cfi_intel_clear_status_register(bank);
- return ERROR_FLASH_OPERATION_FAILED;
- }
-
- if (buf_get_u32(reg_params[4].value, 0, 32) & target_buffer_get_u32(target, error_pattern))
+ cfi_command(bank, 0xA0, write_command);
+ buf_set_u32(reg_params[3].value, 0, 32, buf_get_u32(write_command, 0, 32));
+ cfi_command(bank, 0x80, write_command);
+ buf_set_u32(reg_params[4].value, 0, 32, buf_get_u32(write_command, 0, 32));
+ buf_set_u32(reg_params[6].value, 0, 32, flash_address(bank, 0, pri_ext->_unlock1));
+ buf_set_u32(reg_params[7].value, 0, 32, 0xaa);
+ buf_set_u32(reg_params[8].value, 0, 32, flash_address(bank, 0, pri_ext->_unlock2));
+ buf_set_u32(reg_params[9].value, 0, 32, 0x55);
+
+ retval = target->type->run_algorithm(target, 0, NULL, 10, reg_params,
+ cfi_info->write_algorithm->address,
+ cfi_info->write_algorithm->address + ((24 * 4) - 4),
+ 10000, &armv4_5_info);
+
+ status = buf_get_u32(reg_params[5].value, 0, 32);
+
+ if ((retval != ERROR_OK) || status != 0x80)
{
- /* read status register (outputs debug inforation) */
- cfi_intel_wait_status_busy(bank, 100);
- cfi_intel_clear_status_register(bank);
- return ERROR_FLASH_OPERATION_FAILED;
+ DEBUG("status: 0x%x", status);
+ exit_code = ERROR_FLASH_OPERATION_FAILED;
+ break;
}
-
+
buffer += thisrun_count;
address += thisrun_count;
count -= thisrun_count;
}
-
+
target_free_working_area(target, source);
-
+
destroy_reg_param(®_params[0]);
destroy_reg_param(®_params[1]);
destroy_reg_param(®_params[2]);
destroy_reg_param(®_params[4]);
destroy_reg_param(®_params[5]);
destroy_reg_param(®_params[6]);
-
- return ERROR_OK;
+ destroy_reg_param(®_params[7]);
+ destroy_reg_param(®_params[8]);
+ destroy_reg_param(®_params[9]);
+
+ return exit_code;
}
int cfi_intel_write_word(struct flash_bank_s *bank, u8 *word, u32 address)
{
cfi_flash_bank_t *cfi_info = bank->driver_priv;
- cfi_intel_pri_ext_t *pri_ext = cfi_info->pri_ext;
- target_t *target = cfi_info->target;
+ target_t *target = bank->target;
u8 command[8];
-
+
cfi_intel_clear_status_register(bank);
cfi_command(bank, 0x40, command);
target->type->write_memory(target, address, bank->bus_width, 1, command);
-
+
target->type->write_memory(target, address, bank->bus_width, 1, word);
-
+
if (cfi_intel_wait_status_busy(bank, 1000 * (1 << cfi_info->word_write_timeout_max)) != 0x80)
{
cfi_command(bank, 0xff, command);
target->type->write_memory(target, flash_address(bank, 0, 0x0), bank->bus_width, 1, command);
-
+
ERROR("couldn't write word at base 0x%x, address %x", bank->base, address);
return ERROR_FLASH_OPERATION_FAILED;
}
-
+
return ERROR_OK;
}
-int cfi_write_word(struct flash_bank_s *bank, u8 *word, u32 address)
+int cfi_intel_write_words(struct flash_bank_s *bank, u8 *word, u32 wordcount, u32 address)
+{
+ cfi_flash_bank_t *cfi_info = bank->driver_priv;
+ target_t *target = bank->target;
+ u8 command[8];
+
+ /* Calculate buffer size and boundary mask */
+ u32 buffersize = 1UL << cfi_info->max_buf_write_size;
+ u32 buffermask = buffersize-1;
+ u32 bufferwsize;
+
+ /* Check for valid range */
+ if (address & buffermask)
+ {
+ ERROR("Write address at base 0x%x, address %x not aligned to 2^%d boundary", bank->base, address, cfi_info->max_buf_write_size);
+ return ERROR_FLASH_OPERATION_FAILED;
+ }
+ switch(bank->chip_width)
+ {
+ case 4 : bufferwsize = buffersize / 4; break;
+ case 2 : bufferwsize = buffersize / 2; break;
+ case 1 : bufferwsize = buffersize; break;
+ default:
+ ERROR("Unsupported chip width %d", bank->chip_width);
+ return ERROR_FLASH_OPERATION_FAILED;
+ }
+
+ /* Check for valid size */
+ if (wordcount > bufferwsize)
+ {
+ ERROR("Number of data words %d exceeds available buffersize %d", wordcount, buffersize);
+ return ERROR_FLASH_OPERATION_FAILED;
+ }
+
+ /* Write to flash buffer */
+ cfi_intel_clear_status_register(bank);
+
+ /* Initiate buffer operation _*/
+ cfi_command(bank, 0xE8, command);
+ target->type->write_memory(target, address, bank->bus_width, 1, command);
+ if (cfi_intel_wait_status_busy(bank, 1000 * (1 << cfi_info->buf_write_timeout_max)) != 0x80)
+ {
+ cfi_command(bank, 0xff, command);
+ target->type->write_memory(target, flash_address(bank, 0, 0x0), bank->bus_width, 1, command);
+
+ ERROR("couldn't start buffer write operation at base 0x%x, address %x", bank->base, address);
+ return ERROR_FLASH_OPERATION_FAILED;
+ }
+
+ /* Write buffer wordcount-1 and data words */
+ cfi_command(bank, bufferwsize-1, command);
+ target->type->write_memory(target, address, bank->bus_width, 1, command);
+
+ target->type->write_memory(target, address, bank->bus_width, bufferwsize, word);
+
+ /* Commit write operation */
+ cfi_command(bank, 0xd0, command);
+ target->type->write_memory(target, address, bank->bus_width, 1, command);
+ if (cfi_intel_wait_status_busy(bank, 1000 * (1 << cfi_info->buf_write_timeout_max)) != 0x80)
+ {
+ cfi_command(bank, 0xff, command);
+ target->type->write_memory(target, flash_address(bank, 0, 0x0), bank->bus_width, 1, command);
+
+ ERROR("Buffer write at base 0x%x, address %x failed.", bank->base, address);
+ return ERROR_FLASH_OPERATION_FAILED;
+ }
+
+ return ERROR_OK;
+}
+
+int cfi_spansion_write_word(struct flash_bank_s *bank, u8 *word, u32 address)
+{
+ cfi_flash_bank_t *cfi_info = bank->driver_priv;
+ cfi_spansion_pri_ext_t *pri_ext = cfi_info->pri_ext;
+ target_t *target = bank->target;
+ u8 command[8];
+
+ cfi_command(bank, 0xaa, command);
+ target->type->write_memory(target, flash_address(bank, 0, pri_ext->_unlock1), bank->bus_width, 1, command);
+
+ cfi_command(bank, 0x55, command);
+ target->type->write_memory(target, flash_address(bank, 0, pri_ext->_unlock2), bank->bus_width, 1, command);
+
+ cfi_command(bank, 0xa0, command);
+ target->type->write_memory(target, flash_address(bank, 0, pri_ext->_unlock1), bank->bus_width, 1, command);
+
+ target->type->write_memory(target, address, bank->bus_width, 1, word);
+
+ if (cfi_spansion_wait_status_busy(bank, 1000 * (1 << cfi_info->word_write_timeout_max)) != ERROR_OK)
+ {
+ cfi_command(bank, 0xf0, command);
+ target->type->write_memory(target, flash_address(bank, 0, 0x0), bank->bus_width, 1, command);
+
+ ERROR("couldn't write word at base 0x%x, address %x", bank->base, address);
+ return ERROR_FLASH_OPERATION_FAILED;
+ }
+
+ return ERROR_OK;
+}
+
+int cfi_write_word(struct flash_bank_s *bank, u8 *word, u32 address)
+{
+ cfi_flash_bank_t *cfi_info = bank->driver_priv;
+
+ switch(cfi_info->pri_id)
+ {
+ case 1:
+ case 3:
+ return cfi_intel_write_word(bank, word, address);
+ break;
+ case 2:
+ return cfi_spansion_write_word(bank, word, address);
+ break;
+ default:
+ ERROR("cfi primary command set %i unsupported", cfi_info->pri_id);
+ break;
+ }
+
+ return ERROR_FLASH_OPERATION_FAILED;
+}
+
+int cfi_write_words(struct flash_bank_s *bank, u8 *word, u32 wordcount, u32 address)
{
cfi_flash_bank_t *cfi_info = bank->driver_priv;
- target_t *target = cfi_info->target;
-
+
switch(cfi_info->pri_id)
{
case 1:
case 3:
- return cfi_intel_write_word(bank, word, address);
+ return cfi_intel_write_words(bank, word, wordcount, address);
+ break;
+ case 2:
+ //return cfi_spansion_write_words(bank, word, address);
+ ERROR("cfi primary command set %i unimplemented - FIXME", cfi_info->pri_id);
break;
default:
ERROR("cfi primary command set %i unsupported", cfi_info->pri_id);
break;
}
-
+
return ERROR_FLASH_OPERATION_FAILED;
}
int cfi_write(struct flash_bank_s *bank, u8 *buffer, u32 offset, u32 count)
{
cfi_flash_bank_t *cfi_info = bank->driver_priv;
- target_t *target = cfi_info->target;
+ target_t *target = bank->target;
u32 address = bank->base + offset; /* address of first byte to be programmed */
u32 write_p, copy_p;
int align; /* number of unaligned bytes */
+ int blk_count; /* number of bus_width bytes for block copy */
u8 current_word[CFI_MAX_BUS_WIDTH * 4]; /* word (bus_width size) currently being programmed */
int i;
int retval;
-
- if (cfi_info->target->state != TARGET_HALTED)
- {
- return ERROR_TARGET_NOT_HALTED;
- }
-
+
if (offset + count > bank->size)
return ERROR_FLASH_DST_OUT_OF_BANK;
-
+
if (cfi_info->qry[0] != 'Q')
return ERROR_FLASH_BANK_NOT_PROBED;
write_p = address & ~(bank->bus_width - 1);
if ((align = address - write_p) != 0)
{
+ INFO("Fixup %d unaligned head bytes", align );
+
for (i = 0; i < bank->bus_width; i++)
current_word[i] = 0;
copy_p = write_p;
target->type->read_memory(target, copy_p, 1, 1, &byte);
cfi_add_byte(bank, current_word, byte);
}
-
+
retval = cfi_write_word(bank, current_word, write_p);
if (retval != ERROR_OK)
return retval;
write_p = copy_p;
}
-
+
/* handle blocks of bus_size aligned bytes */
+ blk_count = count & ~(bank->bus_width - 1); /* round down, leave tail bytes */
switch(cfi_info->pri_id)
{
/* try block writes (fails without working area) */
case 1:
case 3:
- retval = cfi_intel_write_block(bank, buffer, write_p, count);
+ retval = cfi_intel_write_block(bank, buffer, write_p, blk_count);
+ break;
+ case 2:
+ retval = cfi_spansion_write_block(bank, buffer, write_p, blk_count);
break;
default:
ERROR("cfi primary command set %i unsupported", cfi_info->pri_id);
+ retval = ERROR_FLASH_OPERATION_FAILED;
break;
}
- if (retval != ERROR_OK)
+ if (retval == ERROR_OK)
+ {
+ /* Increment pointers and decrease count on succesful block write */
+ buffer += blk_count;
+ write_p += blk_count;
+ count -= blk_count;
+ }
+ else
{
if (retval == ERROR_TARGET_RESOURCE_NOT_AVAILABLE)
{
+ u32 buffersize = 1UL << cfi_info->max_buf_write_size;
+ u32 buffermask = buffersize-1;
+ u32 bufferwsize;
+
+ switch(bank->chip_width)
+ {
+ case 4 : bufferwsize = buffersize / 4; break;
+ case 2 : bufferwsize = buffersize / 2; break;
+ case 1 : bufferwsize = buffersize; break;
+ default:
+ ERROR("Unsupported chip width %d", bank->chip_width);
+ return ERROR_FLASH_OPERATION_FAILED;
+ }
+
/* fall back to memory writes */
while (count > bank->bus_width)
{
- for (i = 0; i < bank->bus_width; i++)
- current_word[i] = 0;
-
- for (i = 0; i < bank->bus_width; i++)
+ if ((write_p & 0xff) == 0)
+ {
+ INFO("Programming at %08x, count %08x bytes remaining", write_p, count);
+ }
+#if 0
+ /* NB! this is broken for spansion! */
+ if ((count > bufferwsize) && !(write_p & buffermask))
{
- cfi_add_byte(bank, current_word, *buffer++);
+ retval = cfi_write_words(bank, buffer, bufferwsize, write_p);
+ if (retval != ERROR_OK)
+ return retval;
+
+ buffer += buffersize;
+ write_p += buffersize;
+ count -= buffersize;
+ }
+ else
+#endif
+ {
+ for (i = 0; i < bank->bus_width; i++)
+ current_word[i] = 0;
+
+ for (i = 0; i < bank->bus_width; i++)
+ {
+ cfi_add_byte(bank, current_word, *buffer++);
+ }
+
+ retval = cfi_write_word(bank, current_word, write_p);
+ if (retval != ERROR_OK)
+ return retval;
+
+ write_p += bank->bus_width;
+ count -= bank->bus_width;
}
-
- retval = cfi_write_word(bank, current_word, write_p);
- if (retval != ERROR_OK)
- return retval;
- write_p += bank->bus_width;
- count -= bank->bus_width;
}
}
else
return retval;
}
-
+
+ /* return to read array mode, so we can read from flash again for padding */
+ cfi_command(bank, 0xf0, current_word);
+ target->type->write_memory(target, flash_address(bank, 0, 0x0), bank->bus_width, 1, current_word);
+ cfi_command(bank, 0xff, current_word);
+ target->type->write_memory(target, flash_address(bank, 0, 0x0), bank->bus_width, 1, current_word);
+
/* handle unaligned tail bytes */
if (count > 0)
{
+ INFO("Fixup %d unaligned tail bytes", count );
+
copy_p = write_p;
for (i = 0; i < bank->bus_width; i++)
current_word[i] = 0;
-
+
for (i = 0; (i < bank->bus_width) && (count > 0); ++i, ++copy_p)
{
cfi_add_byte(bank, current_word, *buffer++);
if (retval != ERROR_OK)
return retval;
}
-
+
/* return to read array mode */
cfi_command(bank, 0xf0, current_word);
target->type->write_memory(target, flash_address(bank, 0, 0x0), bank->bus_width, 1, current_word);
cfi_command(bank, 0xff, current_word);
target->type->write_memory(target, flash_address(bank, 0, 0x0), bank->bus_width, 1, current_word);
-
+
return ERROR_OK;
}
+void cfi_fixup_atmel_reversed_erase_regions(flash_bank_t *bank, void *param)
+{
+ cfi_flash_bank_t *cfi_info = bank->driver_priv;
+ cfi_spansion_pri_ext_t *pri_ext = cfi_info->pri_ext;
+
+ pri_ext->_reversed_geometry = 1;
+}
+
+void cfi_fixup_0002_erase_regions(flash_bank_t *bank, void *param)
+{
+ int i;
+ cfi_flash_bank_t *cfi_info = bank->driver_priv;
+ cfi_spansion_pri_ext_t *pri_ext = cfi_info->pri_ext;
+
+ if ((pri_ext->_reversed_geometry) || (pri_ext->TopBottom == 3))
+ {
+ DEBUG("swapping reversed erase region information on cmdset 0002 device");
+
+ for (i = 0; i < cfi_info->num_erase_regions / 2; i++)
+ {
+ int j = (cfi_info->num_erase_regions - 1) - i;
+ u32 swap;
+
+ swap = cfi_info->erase_region_info[i];
+ cfi_info->erase_region_info[i] = cfi_info->erase_region_info[j];
+ cfi_info->erase_region_info[j] = swap;
+ }
+ }
+}
+
+void cfi_fixup_0002_unlock_addresses(flash_bank_t *bank, void *param)
+{
+ cfi_flash_bank_t *cfi_info = bank->driver_priv;
+ cfi_spansion_pri_ext_t *pri_ext = cfi_info->pri_ext;
+ cfi_unlock_addresses_t *unlock_addresses = param;
+
+ pri_ext->_unlock1 = unlock_addresses->unlock1;
+ pri_ext->_unlock2 = unlock_addresses->unlock2;
+}
+
int cfi_probe(struct flash_bank_s *bank)
{
cfi_flash_bank_t *cfi_info = bank->driver_priv;
- target_t *target = cfi_info->target;
+ target_t *target = bank->target;
u8 command[8];
-
+ int num_sectors = 0;
+ int i;
+ int sector = 0;
+ u32 offset = 0;
+ u32 unlock1 = 0x555;
+ u32 unlock2 = 0x2aa;
- cfi_command(bank, 0x98, command);
- target->type->write_memory(target, flash_address(bank, 0, 0x55), bank->bus_width, 1, command);
-
- cfi_info->qry[0] = cfi_query_u8(bank, 0, 0x10);
- cfi_info->qry[1] = cfi_query_u8(bank, 0, 0x11);
- cfi_info->qry[2] = cfi_query_u8(bank, 0, 0x12);
-
- DEBUG("CFI qry returned: 0x%2.2x 0x%2.2x 0x%2.2x", cfi_info->qry[0], cfi_info->qry[1], cfi_info->qry[2]);
-
- if ((cfi_info->qry[0] != 'Q') || (cfi_info->qry[1] != 'R') || (cfi_info->qry[2] != 'Y'))
+ cfi_info->probed = 0;
+
+ /* JEDEC standard JESD21C uses 0x5555 and 0x2aaa as unlock addresses,
+ * while CFI compatible AMD/Spansion flashes use 0x555 and 0x2aa
+ */
+ if (cfi_info->jedec_probe)
+ {
+ unlock1 = 0x5555;
+ unlock2 = 0x2aaa;
+ }
+
+ /* switch to read identifier codes mode ("AUTOSELECT") */
+ cfi_command(bank, 0xaa, command);
+ target->type->write_memory(target, flash_address(bank, 0, unlock1), bank->bus_width, 1, command);
+ cfi_command(bank, 0x55, command);
+ target->type->write_memory(target, flash_address(bank, 0, unlock2), bank->bus_width, 1, command);
+ cfi_command(bank, 0x90, command);
+ target->type->write_memory(target, flash_address(bank, 0, unlock1), bank->bus_width, 1, command);
+
+ if (bank->chip_width == 1)
+ {
+ u8 manufacturer, device_id;
+ target_read_u8(target, bank->base + 0x0, &manufacturer);
+ target_read_u8(target, bank->base + 0x1, &device_id);
+ cfi_info->manufacturer = manufacturer;
+ cfi_info->device_id = device_id;
+ }
+ else if (bank->chip_width == 2)
+ {
+ target_read_u16(target, bank->base + 0x0, &cfi_info->manufacturer);
+ target_read_u16(target, bank->base + 0x2, &cfi_info->device_id);
+ }
+
+ /* switch back to read array mode */
+ cfi_command(bank, 0xf0, command);
+ target->type->write_memory(target, flash_address(bank, 0, 0x00), bank->bus_width, 1, command);
+ cfi_command(bank, 0xff, command);
+ target->type->write_memory(target, flash_address(bank, 0, 0x00), bank->bus_width, 1, command);
+
+ cfi_fixup(bank, cfi_jedec_fixups);
+
+ /* query only if this is a CFI compatible flash,
+ * otherwise the relevant info has already been filled in
+ */
+ if (cfi_info->not_cfi == 0)
{
+ /* enter CFI query mode
+ * according to JEDEC Standard No. 68.01,
+ * a single bus sequence with address = 0x55, data = 0x98 should put
+ * the device into CFI query mode.
+ *
+ * SST flashes clearly violate this, and we will consider them incompatbile for now
+ */
+ cfi_command(bank, 0x98, command);
+ target->type->write_memory(target, flash_address(bank, 0, 0x55), bank->bus_width, 1, command);
+
+ cfi_info->qry[0] = cfi_query_u8(bank, 0, 0x10);
+ cfi_info->qry[1] = cfi_query_u8(bank, 0, 0x11);
+ cfi_info->qry[2] = cfi_query_u8(bank, 0, 0x12);
+
+ DEBUG("CFI qry returned: 0x%2.2x 0x%2.2x 0x%2.2x", cfi_info->qry[0], cfi_info->qry[1], cfi_info->qry[2]);
+
+ if ((cfi_info->qry[0] != 'Q') || (cfi_info->qry[1] != 'R') || (cfi_info->qry[2] != 'Y'))
+ {
+ cfi_command(bank, 0xf0, command);
+ target->type->write_memory(target, flash_address(bank, 0, 0x0), bank->bus_width, 1, command);
+ cfi_command(bank, 0xff, command);
+ target->type->write_memory(target, flash_address(bank, 0, 0x0), bank->bus_width, 1, command);
+ return ERROR_FLASH_BANK_INVALID;
+ }
+
+ cfi_info->pri_id = cfi_query_u16(bank, 0, 0x13);
+ cfi_info->pri_addr = cfi_query_u16(bank, 0, 0x15);
+ cfi_info->alt_id = cfi_query_u16(bank, 0, 0x17);
+ cfi_info->alt_addr = cfi_query_u16(bank, 0, 0x19);
+
+ DEBUG("qry: '%c%c%c', pri_id: 0x%4.4x, pri_addr: 0x%4.4x, alt_id: 0x%4.4x, alt_addr: 0x%4.4x", cfi_info->qry[0], cfi_info->qry[1], cfi_info->qry[2], cfi_info->pri_id, cfi_info->pri_addr, cfi_info->alt_id, cfi_info->alt_addr);
+
+ cfi_info->vcc_min = cfi_query_u8(bank, 0, 0x1b);
+ cfi_info->vcc_max = cfi_query_u8(bank, 0, 0x1c);
+ cfi_info->vpp_min = cfi_query_u8(bank, 0, 0x1d);
+ cfi_info->vpp_max = cfi_query_u8(bank, 0, 0x1e);
+ cfi_info->word_write_timeout_typ = cfi_query_u8(bank, 0, 0x1f);
+ cfi_info->buf_write_timeout_typ = cfi_query_u8(bank, 0, 0x20);
+ cfi_info->block_erase_timeout_typ = cfi_query_u8(bank, 0, 0x21);
+ cfi_info->chip_erase_timeout_typ = cfi_query_u8(bank, 0, 0x22);
+ cfi_info->word_write_timeout_max = cfi_query_u8(bank, 0, 0x23);
+ cfi_info->buf_write_timeout_max = cfi_query_u8(bank, 0, 0x24);
+ cfi_info->block_erase_timeout_max = cfi_query_u8(bank, 0, 0x25);
+ cfi_info->chip_erase_timeout_max = cfi_query_u8(bank, 0, 0x26);
+
+ DEBUG("Vcc min: %1.1x.%1.1x, Vcc max: %1.1x.%1.1x, Vpp min: %1.1x.%1.1x, Vpp max: %1.1x.%1.1x",
+ (cfi_info->vcc_min & 0xf0) >> 4, cfi_info->vcc_min & 0x0f,
+ (cfi_info->vcc_max & 0xf0) >> 4, cfi_info->vcc_max & 0x0f,
+ (cfi_info->vpp_min & 0xf0) >> 4, cfi_info->vpp_min & 0x0f,
+ (cfi_info->vpp_max & 0xf0) >> 4, cfi_info->vpp_max & 0x0f);
+ DEBUG("typ. word write timeout: %u, typ. buf write timeout: %u, typ. block erase timeout: %u, typ. chip erase timeout: %u", 1 << cfi_info->word_write_timeout_typ, 1 << cfi_info->buf_write_timeout_typ,
+ 1 << cfi_info->block_erase_timeout_typ, 1 << cfi_info->chip_erase_timeout_typ);
+ DEBUG("max. word write timeout: %u, max. buf write timeout: %u, max. block erase timeout: %u, max. chip erase timeout: %u", (1 << cfi_info->word_write_timeout_max) * (1 << cfi_info->word_write_timeout_typ),
+ (1 << cfi_info->buf_write_timeout_max) * (1 << cfi_info->buf_write_timeout_typ),
+ (1 << cfi_info->block_erase_timeout_max) * (1 << cfi_info->block_erase_timeout_typ),
+ (1 << cfi_info->chip_erase_timeout_max) * (1 << cfi_info->chip_erase_timeout_typ));
+
+ cfi_info->dev_size = cfi_query_u8(bank, 0, 0x27);
+ cfi_info->interface_desc = cfi_query_u16(bank, 0, 0x28);
+ cfi_info->max_buf_write_size = cfi_query_u16(bank, 0, 0x2a);
+ cfi_info->num_erase_regions = cfi_query_u8(bank, 0, 0x2c);
+
+ DEBUG("size: 0x%x, interface desc: %i, max buffer write size: %x", 1 << cfi_info->dev_size, cfi_info->interface_desc, (1 << cfi_info->max_buf_write_size));
+
+ if (((1 << cfi_info->dev_size) * bank->bus_width / bank->chip_width) != bank->size)
+ {
+ WARNING("configuration specifies 0x%x size, but a 0x%x size flash was found", bank->size, 1 << cfi_info->dev_size);
+ }
+
+ if (cfi_info->num_erase_regions)
+ {
+ cfi_info->erase_region_info = malloc(4 * cfi_info->num_erase_regions);
+ for (i = 0; i < cfi_info->num_erase_regions; i++)
+ {
+ cfi_info->erase_region_info[i] = cfi_query_u32(bank, 0, 0x2d + (4 * i));
+ DEBUG("erase region[%i]: %i blocks of size 0x%x", i, (cfi_info->erase_region_info[i] & 0xffff) + 1, (cfi_info->erase_region_info[i] >> 16) * 256);
+ }
+ }
+ else
+ {
+ cfi_info->erase_region_info = NULL;
+ }
+
+ /* We need to read the primary algorithm extended query table before calculating
+ * the sector layout to be able to apply fixups
+ */
+ switch(cfi_info->pri_id)
+ {
+ /* Intel command set (standard and extended) */
+ case 0x0001:
+ case 0x0003:
+ cfi_read_intel_pri_ext(bank);
+ break;
+ /* AMD/Spansion, Atmel, ... command set */
+ case 0x0002:
+ cfi_read_0002_pri_ext(bank);
+ break;
+ default:
+ ERROR("cfi primary command set %i unsupported", cfi_info->pri_id);
+ break;
+ }
+
+ /* return to read array mode
+ * we use both reset commands, as some Intel flashes fail to recognize the 0xF0 command
+ */
cfi_command(bank, 0xf0, command);
target->type->write_memory(target, flash_address(bank, 0, 0x0), bank->bus_width, 1, command);
cfi_command(bank, 0xff, command);
target->type->write_memory(target, flash_address(bank, 0, 0x0), bank->bus_width, 1, command);
- return ERROR_FLASH_BANK_INVALID;
}
-
- cfi_info->pri_id = cfi_query_u16(bank, 0, 0x13);
- cfi_info->pri_addr = cfi_query_u16(bank, 0, 0x15);
- cfi_info->alt_id = cfi_query_u16(bank, 0, 0x17);
- cfi_info->alt_addr = cfi_query_u16(bank, 0, 0x19);
-
- DEBUG("qry: '%c%c%c', pri_id: 0x%4.4x, pri_addr: 0x%4.4x, alt_id: 0x%4.4x, alt_addr: 0x%4.4x", cfi_info->qry[0], cfi_info->qry[1], cfi_info->qry[2], cfi_info->pri_id, cfi_info->pri_addr, cfi_info->alt_id, cfi_info->alt_addr);
-
- cfi_info->vcc_min = cfi_query_u8(bank, 0, 0x1b);
- cfi_info->vcc_max = cfi_query_u8(bank, 0, 0x1c);
- cfi_info->vpp_min = cfi_query_u8(bank, 0, 0x1d);
- cfi_info->vpp_max = cfi_query_u8(bank, 0, 0x1e);
- cfi_info->word_write_timeout_typ = cfi_query_u8(bank, 0, 0x1f);
- cfi_info->buf_write_timeout_typ = cfi_query_u8(bank, 0, 0x20);
- cfi_info->block_erase_timeout_typ = cfi_query_u8(bank, 0, 0x21);
- cfi_info->chip_erase_timeout_typ = cfi_query_u8(bank, 0, 0x22);
- cfi_info->word_write_timeout_max = cfi_query_u8(bank, 0, 0x23);
- cfi_info->buf_write_timeout_max = cfi_query_u8(bank, 0, 0x24);
- cfi_info->block_erase_timeout_max = cfi_query_u8(bank, 0, 0x25);
- cfi_info->chip_erase_timeout_max = cfi_query_u8(bank, 0, 0x26);
-
- DEBUG("Vcc min: %1.1x.%1.1x, Vcc max: %1.1x.%1.1x, Vpp min: %1.1x.%1.1x, Vpp max: %1.1x.%1.1x",
- (cfi_info->vcc_min & 0xf0) >> 4, cfi_info->vcc_min & 0x0f,
- (cfi_info->vcc_max & 0xf0) >> 4, cfi_info->vcc_max & 0x0f,
- (cfi_info->vpp_min & 0xf0) >> 4, cfi_info->vpp_min & 0x0f,
- (cfi_info->vpp_max & 0xf0) >> 4, cfi_info->vpp_max & 0x0f);
- DEBUG("typ. word write timeout: %u, typ. buf write timeout: %u, typ. block erase timeout: %u, typ. chip erase timeout: %u", 1 << cfi_info->word_write_timeout_typ, 1 << cfi_info->buf_write_timeout_typ,
- 1 << cfi_info->block_erase_timeout_typ, 1 << cfi_info->chip_erase_timeout_typ);
- DEBUG("max. word write timeout: %u, max. buf write timeout: %u, max. block erase timeout: %u, max. chip erase timeout: %u", (1 << cfi_info->word_write_timeout_max) * (1 << cfi_info->word_write_timeout_typ),
- (1 << cfi_info->buf_write_timeout_max) * (1 << cfi_info->buf_write_timeout_typ),
- (1 << cfi_info->block_erase_timeout_max) * (1 << cfi_info->block_erase_timeout_typ),
- (1 << cfi_info->chip_erase_timeout_max) * (1 << cfi_info->chip_erase_timeout_typ));
-
- cfi_info->dev_size = cfi_query_u8(bank, 0, 0x27);
- cfi_info->interface_desc = cfi_query_u16(bank, 0, 0x28);
- cfi_info->max_buf_write_size = cfi_query_u16(bank, 0, 0x2a);
- cfi_info->num_erase_regions = cfi_query_u8(bank, 0, 0x2c);
-
- DEBUG("size: 0x%x, interface desc: %i, max buffer write size: %x", 1 << cfi_info->dev_size, cfi_info->interface_desc, (1 << cfi_info->max_buf_write_size));
-
- if (((1 << cfi_info->dev_size) * bank->bus_width / bank->chip_width) != bank->size)
+
+ /* apply fixups depending on the primary command set */
+ switch(cfi_info->pri_id)
{
- WARNING("configuration specifies 0x%x size, but a 0x%x size flash was found", bank->size, 1 << cfi_info->dev_size);
+ /* Intel command set (standard and extended) */
+ case 0x0001:
+ case 0x0003:
+ cfi_fixup(bank, cfi_0001_fixups);
+ break;
+ /* AMD/Spansion, Atmel, ... command set */
+ case 0x0002:
+ cfi_fixup(bank, cfi_0002_fixups);
+ break;
+ default:
+ ERROR("cfi primary command set %i unsupported", cfi_info->pri_id);
+ break;
}
-
- if (cfi_info->num_erase_regions)
- {
- int i;
- int num_sectors = 0;
- int sector = 0;
- u32 offset = 0;
- cfi_info->erase_region_info = malloc(4 * cfi_info->num_erase_regions);
-
+
+ if (cfi_info->num_erase_regions == 0)
+ {
+ /* a device might have only one erase block, spanning the whole device */
+ bank->num_sectors = 1;
+ bank->sectors = malloc(sizeof(flash_sector_t));
+
+ bank->sectors[sector].offset = 0x0;
+ bank->sectors[sector].size = bank->size;
+ bank->sectors[sector].is_erased = -1;
+ bank->sectors[sector].is_protected = -1;
+ }
+ else
+ {
for (i = 0; i < cfi_info->num_erase_regions; i++)
{
- cfi_info->erase_region_info[i] = cfi_query_u32(bank, 0, 0x2d + (4 * i));
- DEBUG("erase region[%i]: %i blocks of size 0x%x", i, (cfi_info->erase_region_info[i] & 0xffff) + 1, (cfi_info->erase_region_info[i] >> 16) * 256);
-
num_sectors += (cfi_info->erase_region_info[i] & 0xffff) + 1;
}
-
+
bank->num_sectors = num_sectors;
bank->sectors = malloc(sizeof(flash_sector_t) * num_sectors);
+
for (i = 0; i < cfi_info->num_erase_regions; i++)
{
int j;
}
}
}
- else
- {
- cfi_info->erase_region_info = NULL;
- }
-
- switch(cfi_info->pri_id)
- {
- case 1:
- case 3:
- cfi_read_intel_pri_ext(bank);
- break;
- default:
- ERROR("cfi primary command set %i unsupported", cfi_info->pri_id);
- break;
- }
-
- /* return to read array mode */
- cfi_command(bank, 0xf0, command);
- target->type->write_memory(target, flash_address(bank, 0, 0x0), bank->bus_width, 1, command);
- cfi_command(bank, 0xff, command);
- target->type->write_memory(target, flash_address(bank, 0, 0x0), bank->bus_width, 1, command);
+ cfi_info->probed = 1;
+
return ERROR_OK;
}
+int cfi_auto_probe(struct flash_bank_s *bank)
+{
+ cfi_flash_bank_t *cfi_info = bank->driver_priv;
+ if (cfi_info->probed)
+ return ERROR_OK;
+ return cfi_probe(bank);
+}
+
int cfi_erase_check(struct flash_bank_s *bank)
{
cfi_flash_bank_t *cfi_info = bank->driver_priv;
- target_t *target = cfi_info->target;
+ target_t *target = bank->target;
int i;
int retval;
-
+
if (!cfi_info->erase_check_algorithm)
{
u32 erase_check_code[] =
0x1afffffb, /* b -4 */
0xeafffffe /* b 0 */
};
-
+
/* make sure we have a working area */
if (target_alloc_working_area(target, 20, &cfi_info->erase_check_algorithm) != ERROR_OK)
{
else
{
u8 erase_check_code_buf[5 * 4];
-
+
for (i = 0; i < 5; i++)
target_buffer_set_u32(target, erase_check_code_buf + (i*4), erase_check_code[i]);
-
+
/* write algorithm code to working area */
target->type->write_memory(target, cfi_info->erase_check_algorithm->address, 4, 5, erase_check_code_buf);
}
}
-
+
if (!cfi_info->erase_check_algorithm)
{
u32 *buffer = malloc(4096);
-
+
for (i = 0; i < bank->num_sectors; i++)
{
u32 address = bank->base + bank->sectors[i].offset;
u32 size = bank->sectors[i].size;
u32 check = 0xffffffffU;
int erased = 1;
-
+
while (size > 0)
{
u32 thisrun_size = (size > 4096) ? 4096 : size;
int j;
-
+
target->type->read_memory(target, address, 4, thisrun_size / 4, (u8*)buffer);
-
+
for (j = 0; j < thisrun_size / 4; j++)
check &= buffer[j];
-
+
if (check != 0xffffffff)
{
erased = 0;
break;
}
-
+
size -= thisrun_size;
address += thisrun_size;
}
-
+
bank->sectors[i].is_erased = erased;
}
-
+
free(buffer);
}
else
- {
+ {
for (i = 0; i < bank->num_sectors; i++)
{
u32 address = bank->base + bank->sectors[i].offset;
reg_param_t reg_params[3];
armv4_5_algorithm_t armv4_5_info;
-
+
armv4_5_info.common_magic = ARMV4_5_COMMON_MAGIC;
armv4_5_info.core_mode = ARMV4_5_MODE_SVC;
armv4_5_info.core_state = ARMV4_5_STATE_ARM;
-
+
init_reg_param(®_params[0], "r0", 32, PARAM_OUT);
buf_set_u32(reg_params[0].value, 0, 32, address);
-
+
init_reg_param(®_params[1], "r1", 32, PARAM_OUT);
buf_set_u32(reg_params[1].value, 0, 32, size);
-
+
init_reg_param(®_params[2], "r2", 32, PARAM_IN_OUT);
buf_set_u32(reg_params[2].value, 0, 32, 0xff);
-
+
if ((retval = target->type->run_algorithm(target, 0, NULL, 3, reg_params, cfi_info->erase_check_algorithm->address, cfi_info->erase_check_algorithm->address + 0x10, 10000, &armv4_5_info)) != ERROR_OK)
return ERROR_FLASH_OPERATION_FAILED;
-
+
if (buf_get_u32(reg_params[2].value, 0, 32) == 0xff)
bank->sectors[i].is_erased = 1;
else
bank->sectors[i].is_erased = 0;
-
+
destroy_reg_param(®_params[0]);
destroy_reg_param(®_params[1]);
destroy_reg_param(®_params[2]);
}
}
-
+
return ERROR_OK;
}
{
cfi_flash_bank_t *cfi_info = bank->driver_priv;
cfi_intel_pri_ext_t *pri_ext = cfi_info->pri_ext;
- target_t *target = cfi_info->target;
+ target_t *target = bank->target;
u8 command[CFI_MAX_BUS_WIDTH];
int i;
-
+
/* check if block lock bits are supported on this device */
if (!(pri_ext->blk_status_reg_mask & 0x1))
return ERROR_FLASH_OPERATION_FAILED;
for (i = 0; i < bank->num_sectors; i++)
{
u8 block_status = cfi_get_u8(bank, i, 0x2);
-
+
if (block_status & 1)
bank->sectors[i].is_protected = 1;
else
return ERROR_OK;
}
+int cfi_spansion_protect_check(struct flash_bank_s *bank)
+{
+ cfi_flash_bank_t *cfi_info = bank->driver_priv;
+ cfi_spansion_pri_ext_t *pri_ext = cfi_info->pri_ext;
+ target_t *target = bank->target;
+ u8 command[8];
+ int i;
+
+ cfi_command(bank, 0xaa, command);
+ target->type->write_memory(target, flash_address(bank, 0, pri_ext->_unlock1), bank->bus_width, 1, command);
+
+ cfi_command(bank, 0x55, command);
+ target->type->write_memory(target, flash_address(bank, 0, pri_ext->_unlock2), bank->bus_width, 1, command);
+
+ cfi_command(bank, 0x90, command);
+ target->type->write_memory(target, flash_address(bank, 0, pri_ext->_unlock1), bank->bus_width, 1, command);
+
+ for (i = 0; i < bank->num_sectors; i++)
+ {
+ u8 block_status = cfi_get_u8(bank, i, 0x2);
+
+ if (block_status & 1)
+ bank->sectors[i].is_protected = 1;
+ else
+ bank->sectors[i].is_protected = 0;
+ }
+
+ cfi_command(bank, 0xf0, command);
+ target->type->write_memory(target, flash_address(bank, 0, 0x0), bank->bus_width, 1, command);
+
+ return ERROR_OK;
+}
+
int cfi_protect_check(struct flash_bank_s *bank)
{
cfi_flash_bank_t *cfi_info = bank->driver_priv;
- target_t *target = cfi_info->target;
if (cfi_info->qry[0] != 'Q')
return ERROR_FLASH_BANK_NOT_PROBED;
-
+
switch(cfi_info->pri_id)
{
case 1:
case 3:
return cfi_intel_protect_check(bank);
break;
+ case 2:
+ return cfi_spansion_protect_check(bank);
+ break;
default:
ERROR("cfi primary command set %i unsupported", cfi_info->pri_id);
break;
}
-
+
return ERROR_OK;
}
{
int printed;
cfi_flash_bank_t *cfi_info = bank->driver_priv;
-
- if (cfi_info->qry[0] == -1)
+
+ if (cfi_info->qry[0] == (char)-1)
{
printed = snprintf(buf, buf_size, "\ncfi flash bank not probed yet\n");
return ERROR_OK;
}
-
+
printed = snprintf(buf, buf_size, "\ncfi information:\n");
buf += printed;
buf_size -= printed;
-
+
+ printed = snprintf(buf, buf_size, "\nmfr: 0x%4.4x, id:0x%4.4x\n",
+ cfi_info->manufacturer, cfi_info->device_id);
+ buf += printed;
+ buf_size -= printed;
+
printed = snprintf(buf, buf_size, "qry: '%c%c%c', pri_id: 0x%4.4x, pri_addr: 0x%4.4x, alt_id: 0x%4.4x, alt_addr: 0x%4.4x\n", cfi_info->qry[0], cfi_info->qry[1], cfi_info->qry[2], cfi_info->pri_id, cfi_info->pri_addr, cfi_info->alt_id, cfi_info->alt_addr);
buf += printed;
buf_size -= printed;
-
+
printed = snprintf(buf, buf_size, "Vcc min: %1.1x.%1.1x, Vcc max: %1.1x.%1.1x, Vpp min: %1.1x.%1.1x, Vpp max: %1.1x.%1.1x\n", (cfi_info->vcc_min & 0xf0) >> 4, cfi_info->vcc_min & 0x0f,
(cfi_info->vcc_max & 0xf0) >> 4, cfi_info->vcc_max & 0x0f,
(cfi_info->vpp_min & 0xf0) >> 4, cfi_info->vpp_min & 0x0f,
(cfi_info->vpp_max & 0xf0) >> 4, cfi_info->vpp_max & 0x0f);
buf += printed;
buf_size -= printed;
-
+
printed = snprintf(buf, buf_size, "typ. word write timeout: %u, typ. buf write timeout: %u, typ. block erase timeout: %u, typ. chip erase timeout: %u\n", 1 << cfi_info->word_write_timeout_typ, 1 << cfi_info->buf_write_timeout_typ,
1 << cfi_info->block_erase_timeout_typ, 1 << cfi_info->chip_erase_timeout_typ);
buf += printed;
buf_size -= printed;
-
+
printed = snprintf(buf, buf_size, "max. word write timeout: %u, max. buf write timeout: %u, max. block erase timeout: %u, max. chip erase timeout: %u\n", (1 << cfi_info->word_write_timeout_max) * (1 << cfi_info->word_write_timeout_typ),
(1 << cfi_info->buf_write_timeout_max) * (1 << cfi_info->buf_write_timeout_typ),
(1 << cfi_info->block_erase_timeout_max) * (1 << cfi_info->block_erase_timeout_typ),
(1 << cfi_info->chip_erase_timeout_max) * (1 << cfi_info->chip_erase_timeout_typ));
buf += printed;
buf_size -= printed;
-
+
printed = snprintf(buf, buf_size, "size: 0x%x, interface desc: %i, max buffer write size: %x\n", 1 << cfi_info->dev_size, cfi_info->interface_desc, cfi_info->max_buf_write_size);
buf += printed;
buf_size -= printed;
-
+
switch(cfi_info->pri_id)
{
case 1:
case 3:
cfi_intel_info(bank, buf, buf_size);
break;
+ case 2:
+ cfi_spansion_info(bank, buf, buf_size);
+ break;
default:
ERROR("cfi primary command set %i unsupported", cfi_info->pri_id);
break;
}
-
+
return ERROR_OK;
}
projects / fw / openocd / blobdiff