{
if (!bank->sectors)
{
- ERROR("BUG: sector list not yet built");
+ LOG_ERROR("BUG: sector list not yet built");
exit(-1);
}
return bank->base + bank->sectors[sector].offset + offset * bank->bus_width;
if (target->state != TARGET_HALTED)
{
- ERROR("BUG: attempted to clear status register while target wasn't halted");
+ LOG_ERROR("BUG: attempted to clear status register while target wasn't halted");
exit(-1);
}
while ((!((status = cfi_get_u8(bank, 0, 0x0)) & 0x80)) && (timeout-- > 0))
{
- DEBUG("status: 0x%x", status);
+ LOG_DEBUG("status: 0x%x", status);
usleep(1000);
}
/* mask out bit 0 (reserved) */
status = status & 0xfe;
- DEBUG("status: 0x%x", status);
+ LOG_DEBUG("status: 0x%x", status);
if ((status & 0x80) != 0x80)
{
- ERROR("timeout while waiting for WSM to become ready");
+ LOG_ERROR("timeout while waiting for WSM to become ready");
}
else if (status != 0x80)
{
- ERROR("status register: 0x%x", status);
+ LOG_ERROR("status register: 0x%x", status);
if (status & 0x2)
- ERROR("Block Lock-Bit Detected, Operation Abort");
+ LOG_ERROR("Block Lock-Bit Detected, Operation Abort");
if (status & 0x4)
- ERROR("Program suspended");
+ LOG_ERROR("Program suspended");
if (status & 0x8)
- ERROR("Low Programming Voltage Detected, Operation Aborted");
+ LOG_ERROR("Low Programming Voltage Detected, Operation Aborted");
if (status & 0x10)
- ERROR("Program Error / Error in Setting Lock-Bit");
+ LOG_ERROR("Program Error / Error in Setting Lock-Bit");
if (status & 0x20)
- ERROR("Error in Block Erasure or Clear Lock-Bits");
+ LOG_ERROR("Error in Block Erasure or Clear Lock-Bits");
if (status & 0x40)
- ERROR("Block Erase Suspended");
+ LOG_ERROR("Block Erase Suspended");
cfi_intel_clear_status_register(bank);
}
oldstatus = cfi_get_u8(bank, 0, 0x0);
status = cfi_get_u8(bank, 0, 0x0);
if ((status ^ oldstatus) & 0x40) {
- ERROR("dq5 timeout, status: 0x%x", status);
+ LOG_ERROR("dq5 timeout, status: 0x%x", status);
return(ERROR_FLASH_OPERATION_FAILED);
} else {
- DEBUG("status: 0x%x", status);
+ LOG_DEBUG("status: 0x%x", status);
return(ERROR_OK);
}
}
} else {
- DEBUG("status: 0x%x", status);
+ LOG_DEBUG("status: 0x%x", status);
return(ERROR_OK);
}
usleep(1000);
} while (timeout-- > 0);
- ERROR("timeout, status: 0x%x", status);
+ LOG_ERROR("timeout, status: 0x%x", status);
return(ERROR_FLASH_BUSY);
}
pri_ext->major_version = cfi_query_u8(bank, 0, cfi_info->pri_addr + 3);
pri_ext->minor_version = cfi_query_u8(bank, 0, cfi_info->pri_addr + 4);
- DEBUG("pri: '%c%c%c', version: %c.%c", pri_ext->pri[0], pri_ext->pri[1], pri_ext->pri[2], pri_ext->major_version, pri_ext->minor_version);
+ LOG_DEBUG("pri: '%c%c%c', version: %c.%c", pri_ext->pri[0], pri_ext->pri[1], pri_ext->pri[2], pri_ext->major_version, pri_ext->minor_version);
pri_ext->feature_support = cfi_query_u32(bank, 0, cfi_info->pri_addr + 5);
pri_ext->suspend_cmd_support = cfi_query_u8(bank, 0, cfi_info->pri_addr + 9);
pri_ext->blk_status_reg_mask = cfi_query_u16(bank, 0, cfi_info->pri_addr + 0xa);
- DEBUG("feature_support: 0x%x, suspend_cmd_support: 0x%x, blk_status_reg_mask: 0x%x", pri_ext->feature_support, pri_ext->suspend_cmd_support, pri_ext->blk_status_reg_mask);
+ LOG_DEBUG("feature_support: 0x%x, suspend_cmd_support: 0x%x, blk_status_reg_mask: 0x%x", pri_ext->feature_support, pri_ext->suspend_cmd_support, pri_ext->blk_status_reg_mask);
pri_ext->vcc_optimal = cfi_query_u8(bank, 0, cfi_info->pri_addr + 0xc);
pri_ext->vpp_optimal = cfi_query_u8(bank, 0, cfi_info->pri_addr + 0xd);
- DEBUG("Vcc opt: %1.1x.%1.1x, Vpp opt: %1.1x.%1.1x",
+ LOG_DEBUG("Vcc opt: %1.1x.%1.1x, Vpp opt: %1.1x.%1.1x",
(pri_ext->vcc_optimal & 0xf0) >> 4, pri_ext->vcc_optimal & 0x0f,
(pri_ext->vpp_optimal & 0xf0) >> 4, pri_ext->vpp_optimal & 0x0f);
pri_ext->num_protection_fields = cfi_query_u8(bank, 0, cfi_info->pri_addr + 0xe);
if (pri_ext->num_protection_fields != 1)
{
- WARNING("expected one protection register field, but found %i", pri_ext->num_protection_fields);
+ LOG_WARNING("expected one protection register field, but found %i", pri_ext->num_protection_fields);
}
pri_ext->prot_reg_addr = cfi_query_u16(bank, 0, cfi_info->pri_addr + 0xf);
pri_ext->fact_prot_reg_size = cfi_query_u8(bank, 0, cfi_info->pri_addr + 0x11);
pri_ext->user_prot_reg_size = cfi_query_u8(bank, 0, cfi_info->pri_addr + 0x12);
- DEBUG("protection_fields: %i, prot_reg_addr: 0x%x, factory pre-programmed: %i, user programmable: %i", pri_ext->num_protection_fields, pri_ext->prot_reg_addr, 1 << pri_ext->fact_prot_reg_size, 1 << pri_ext->user_prot_reg_size);
+ LOG_DEBUG("protection_fields: %i, prot_reg_addr: 0x%x, factory pre-programmed: %i, user programmable: %i", pri_ext->num_protection_fields, pri_ext->prot_reg_addr, 1 << pri_ext->fact_prot_reg_size, 1 << pri_ext->user_prot_reg_size);
return ERROR_OK;
}
pri_ext->major_version = cfi_query_u8(bank, 0, cfi_info->pri_addr + 3);
pri_ext->minor_version = cfi_query_u8(bank, 0, cfi_info->pri_addr + 4);
- DEBUG("pri: '%c%c%c', version: %c.%c", pri_ext->pri[0], pri_ext->pri[1], pri_ext->pri[2], pri_ext->major_version, pri_ext->minor_version);
+ LOG_DEBUG("pri: '%c%c%c', version: %c.%c", pri_ext->pri[0], pri_ext->pri[1], pri_ext->pri[2], pri_ext->major_version, pri_ext->minor_version);
pri_ext->SiliconRevision = cfi_query_u8(bank, 0, cfi_info->pri_addr + 5);
pri_ext->EraseSuspend = cfi_query_u8(bank, 0, cfi_info->pri_addr + 6);
pri_ext->VppMax = cfi_query_u8(bank, 0, cfi_info->pri_addr + 14);
pri_ext->TopBottom = cfi_query_u8(bank, 0, cfi_info->pri_addr + 15);
- DEBUG("Silicon Revision: 0x%x, Erase Suspend: 0x%x, Block protect: 0x%x", pri_ext->SiliconRevision,
+ LOG_DEBUG("Silicon Revision: 0x%x, Erase Suspend: 0x%x, Block protect: 0x%x", pri_ext->SiliconRevision,
pri_ext->EraseSuspend, pri_ext->BlkProt);
- DEBUG("Temporary Unprotect: 0x%x, Block Protect Scheme: 0x%x, Simultaneous Ops: 0x%x", pri_ext->TmpBlkUnprotect,
+ LOG_DEBUG("Temporary Unprotect: 0x%x, Block Protect Scheme: 0x%x, Simultaneous Ops: 0x%x", pri_ext->TmpBlkUnprotect,
pri_ext->BlkProtUnprot, pri_ext->SimultaneousOps);
- DEBUG("Burst Mode: 0x%x, Page Mode: 0x%x, ", pri_ext->BurstMode, pri_ext->PageMode);
+ LOG_DEBUG("Burst Mode: 0x%x, Page Mode: 0x%x, ", pri_ext->BurstMode, pri_ext->PageMode);
- DEBUG("Vpp min: %2.2d.%1.1d, Vpp max: %2.2d.%1.1x",
+ LOG_DEBUG("Vpp min: %2.2d.%1.1d, Vpp max: %2.2d.%1.1x",
(pri_ext->VppMin & 0xf0) >> 4, pri_ext->VppMin & 0x0f,
(pri_ext->VppMax & 0xf0) >> 4, pri_ext->VppMax & 0x0f);
- DEBUG("WP# protection 0x%x", pri_ext->TopBottom);
+ LOG_DEBUG("WP# protection 0x%x", pri_ext->TopBottom);
/* default values for implementation specific workarounds */
pri_ext->_unlock1 = cfi_unlock_addresses[CFI_UNLOCK_555_2AA].unlock1;
atmel_pri_ext.major_version = cfi_query_u8(bank, 0, cfi_info->pri_addr + 3);
atmel_pri_ext.minor_version = cfi_query_u8(bank, 0, cfi_info->pri_addr + 4);
- DEBUG("pri: '%c%c%c', version: %c.%c", atmel_pri_ext.pri[0], atmel_pri_ext.pri[1], atmel_pri_ext.pri[2], atmel_pri_ext.major_version, atmel_pri_ext.minor_version);
+ LOG_DEBUG("pri: '%c%c%c', version: %c.%c", atmel_pri_ext.pri[0], atmel_pri_ext.pri[1], atmel_pri_ext.pri[2], atmel_pri_ext.major_version, atmel_pri_ext.minor_version);
pri_ext->major_version = atmel_pri_ext.major_version;
pri_ext->minor_version = atmel_pri_ext.minor_version;
atmel_pri_ext.burst_mode = cfi_query_u8(bank, 0, cfi_info->pri_addr + 7);
atmel_pri_ext.page_mode = cfi_query_u8(bank, 0, cfi_info->pri_addr + 8);
- DEBUG("features: 0x%2.2x, bottom_boot: 0x%2.2x, burst_mode: 0x%2.2x, page_mode: 0x%2.2x",
+ LOG_DEBUG("features: 0x%2.2x, bottom_boot: 0x%2.2x, burst_mode: 0x%2.2x, page_mode: 0x%2.2x",
atmel_pri_ext.features, atmel_pri_ext.bottom_boot, atmel_pri_ext.burst_mode, atmel_pri_ext.page_mode);
if (atmel_pri_ext.features & 0x02)
if (argc < 6)
{
- WARNING("incomplete flash_bank cfi configuration");
+ LOG_WARNING("incomplete flash_bank cfi configuration");
return ERROR_FLASH_BANK_INVALID;
}
if ((strtoul(args[4], NULL, 0) > CFI_MAX_CHIP_WIDTH)
|| (strtoul(args[3], NULL, 0) > CFI_MAX_BUS_WIDTH))
{
- ERROR("chip and bus width have to specified in bytes");
+ LOG_ERROR("chip and bus width have to specified in bytes");
return ERROR_FLASH_BANK_INVALID;
}
cfi_command(bank, 0xff, command);
target->type->write_memory(target, flash_address(bank, 0, 0x0), bank->bus_width, 1, command);
- ERROR("couldn't erase block %i of flash bank at base 0x%x", i, bank->base);
+ LOG_ERROR("couldn't erase block %i of flash bank at base 0x%x", i, bank->base);
return ERROR_FLASH_OPERATION_FAILED;
}
}
cfi_command(bank, 0xf0, command);
target->type->write_memory(target, flash_address(bank, 0, 0x0), bank->bus_width, 1, command);
- ERROR("couldn't erase block %i of flash bank at base 0x%x", i, bank->base);
+ LOG_ERROR("couldn't erase block %i of flash bank at base 0x%x", i, bank->base);
return ERROR_FLASH_OPERATION_FAILED;
}
}
return cfi_spansion_erase(bank, first, last);
break;
default:
- ERROR("cfi primary command set %i unsupported", cfi_info->pri_id);
+ LOG_ERROR("cfi primary command set %i unsupported", cfi_info->pri_id);
break;
}
for (i = first; i <= last; i++)
{
cfi_command(bank, 0x60, command);
- DEBUG("address: 0x%4.4x, command: 0x%4.4x", flash_address(bank, i, 0x0), target_buffer_get_u32(target, command));
+ LOG_DEBUG("address: 0x%4.4x, command: 0x%4.4x", flash_address(bank, i, 0x0), target_buffer_get_u32(target, command));
target->type->write_memory(target, flash_address(bank, i, 0x0), bank->bus_width, 1, command);
if (set)
{
cfi_command(bank, 0x01, command);
- DEBUG("address: 0x%4.4x, command: 0x%4.4x", flash_address(bank, i, 0x0), target_buffer_get_u32(target, command));
+ LOG_DEBUG("address: 0x%4.4x, command: 0x%4.4x", flash_address(bank, i, 0x0), target_buffer_get_u32(target, command));
target->type->write_memory(target, flash_address(bank, i, 0x0), bank->bus_width, 1, command);
bank->sectors[i].is_protected = 1;
}
else
{
cfi_command(bank, 0xd0, command);
- DEBUG("address: 0x%4.4x, command: 0x%4.4x", flash_address(bank, i, 0x0), target_buffer_get_u32(target, command));
+ LOG_DEBUG("address: 0x%4.4x, command: 0x%4.4x", flash_address(bank, i, 0x0), target_buffer_get_u32(target, command));
target->type->write_memory(target, flash_address(bank, i, 0x0), bank->bus_width, 1, command);
bank->sectors[i].is_protected = 0;
}
if ((block_status & 0x1) != set)
{
- ERROR("couldn't change block lock status (set = %i, block_status = 0x%2.2x)", set, block_status);
+ LOG_ERROR("couldn't change block lock status (set = %i, block_status = 0x%2.2x)", set, block_status);
cfi_command(bank, 0x70, command);
target->type->write_memory(target, flash_address(bank, 0, 0x55), bank->bus_width, 1, command);
cfi_intel_wait_status_busy(bank, 10);
cfi_intel_protect(bank, set, first, last);
break;
default:
- ERROR("cfi primary command set %i unsupported", cfi_info->pri_id);
+ LOG_ERROR("cfi primary command set %i unsupported", cfi_info->pri_id);
break;
}
return target_buffer_get_u32(target, buf);
break;
default :
- ERROR("Unsupported bank buswidth %d, can't do block memory writes", bank->bus_width);
+ LOG_ERROR("Unsupported bank buswidth %d, can't do block memory writes", bank->bus_width);
return 0;
}
}
target_code_size = sizeof(word_32_code);
break;
default:
- ERROR("Unsupported bank buswidth %d, can't do block memory writes", bank->bus_width);
+ LOG_ERROR("Unsupported bank buswidth %d, can't do block memory writes", bank->bus_width);
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
}
{
if ( target_code_size > sizeof(target_code) )
{
- WARNING("Internal error - target code buffer to small. Increase CFI_MAX_INTEL_CODESIZE and recompile.");
+ LOG_WARNING("Internal error - target code buffer to small. Increase CFI_MAX_INTEL_CODESIZE and recompile.");
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
}
cfi_fix_code_endian(target, target_code, target_code_src, target_code_size / 4);
retval = target_alloc_working_area(target, target_code_size, &cfi_info->write_algorithm);
if (retval != ERROR_OK)
{
- WARNING("No working area available, can't do block memory writes");
+ LOG_WARNING("No working area available, can't do block memory writes");
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
};
retval = target_write_buffer(target, cfi_info->write_algorithm->address, target_code_size, target_code);
if (retval != ERROR_OK)
{
- ERROR("Unable to write block write code to target");
+ LOG_ERROR("Unable to write block write code to target");
goto cleanup;
}
}
buffer_size /= 2;
if (buffer_size <= 256)
{
- WARNING("no large enough working area available, can't do block memory writes");
+ LOG_WARNING("no large enough working area available, can't do block memory writes");
retval = ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
goto cleanup;
}
busy_pattern_val = cfi_command_val(bank, 0x80);
error_pattern_val = cfi_command_val(bank, 0x7e);
- INFO("Using target buffer at 0x%08x and of size 0x%04x", source->address, buffer_size );
+ LOG_INFO("Using target buffer at 0x%08x and of size 0x%04x", source->address, buffer_size );
/* Programming main loop */
while (count > 0)
buf_set_u32(reg_params[5].value, 0, 32, busy_pattern_val);
buf_set_u32(reg_params[6].value, 0, 32, error_pattern_val);
- INFO("Write 0x%04x bytes to flash at 0x%08x", thisrun_count, address );
+ LOG_INFO("Write 0x%04x bytes to flash at 0x%08x", thisrun_count, address );
/* Execute algorithm, assume breakpoint for last instruction */
retval = target->type->run_algorithm(target, 0, NULL, 7, reg_params,
if (retval != ERROR_OK)
{
cfi_intel_clear_status_register(bank);
- ERROR("Execution of flash algorythm failed. Can't fall back. Please report.");
+ LOG_ERROR("Execution of flash algorythm failed. Can't fall back. Please report.");
retval = ERROR_FLASH_OPERATION_FAILED;
/* retval = ERROR_TARGET_RESOURCE_NOT_AVAILABLE; */
/* FIXME To allow fall back or recovery, we must save the actual status
target_code_size = sizeof(word_32_code);
break;
default:
- ERROR("Unsupported bank buswidth %d, can't do block memory writes", bank->bus_width);
+ LOG_ERROR("Unsupported bank buswidth %d, can't do block memory writes", bank->bus_width);
return ERROR_FLASH_OPERATION_FAILED;
}
target_code = malloc(target_code_size);
if (cfi_info->write_algorithm)
target_free_working_area(target, cfi_info->write_algorithm);
- WARNING("not enough working area available, can't do block memory writes");
+ LOG_WARNING("not enough working area available, can't do block memory writes");
return ERROR_TARGET_RESOURCE_NOT_AVAILABLE;
}
};
if ((retval != ERROR_OK) || status != 0x80)
{
- DEBUG("status: 0x%x", status);
+ LOG_DEBUG("status: 0x%x", status);
exit_code = ERROR_FLASH_OPERATION_FAILED;
break;
}
cfi_command(bank, 0xff, command);
target->type->write_memory(target, flash_address(bank, 0, 0x0), bank->bus_width, 1, command);
- ERROR("couldn't write word at base 0x%x, address %x", bank->base, address);
+ LOG_ERROR("couldn't write word at base 0x%x, address %x", bank->base, address);
return ERROR_FLASH_OPERATION_FAILED;
}
/* Check for valid range */
if (address & buffermask)
{
- ERROR("Write address at base 0x%x, address %x not aligned to 2^%d boundary", bank->base, address, cfi_info->max_buf_write_size);
+ LOG_ERROR("Write address at base 0x%x, address %x not aligned to 2^%d boundary", bank->base, address, cfi_info->max_buf_write_size);
return ERROR_FLASH_OPERATION_FAILED;
}
switch(bank->chip_width)
case 2 : bufferwsize = buffersize / 2; break;
case 1 : bufferwsize = buffersize; break;
default:
- ERROR("Unsupported chip width %d", bank->chip_width);
+ LOG_ERROR("Unsupported chip width %d", bank->chip_width);
return ERROR_FLASH_OPERATION_FAILED;
}
/* Check for valid size */
if (wordcount > bufferwsize)
{
- ERROR("Number of data words %d exceeds available buffersize %d", wordcount, buffersize);
+ LOG_ERROR("Number of data words %d exceeds available buffersize %d", wordcount, buffersize);
return ERROR_FLASH_OPERATION_FAILED;
}
cfi_command(bank, 0xff, command);
target->type->write_memory(target, flash_address(bank, 0, 0x0), bank->bus_width, 1, command);
- ERROR("couldn't start buffer write operation at base 0x%x, address %x", bank->base, address);
+ LOG_ERROR("couldn't start buffer write operation at base 0x%x, address %x", bank->base, address);
return ERROR_FLASH_OPERATION_FAILED;
}
cfi_command(bank, 0xff, command);
target->type->write_memory(target, flash_address(bank, 0, 0x0), bank->bus_width, 1, command);
- ERROR("Buffer write at base 0x%x, address %x failed.", bank->base, address);
+ LOG_ERROR("Buffer write at base 0x%x, address %x failed.", bank->base, address);
return ERROR_FLASH_OPERATION_FAILED;
}
cfi_command(bank, 0xf0, command);
target->type->write_memory(target, flash_address(bank, 0, 0x0), bank->bus_width, 1, command);
- ERROR("couldn't write word at base 0x%x, address %x", bank->base, address);
+ LOG_ERROR("couldn't write word at base 0x%x, address %x", bank->base, address);
return ERROR_FLASH_OPERATION_FAILED;
}
return cfi_spansion_write_word(bank, word, address);
break;
default:
- ERROR("cfi primary command set %i unsupported", cfi_info->pri_id);
+ LOG_ERROR("cfi primary command set %i unsupported", cfi_info->pri_id);
break;
}
break;
case 2:
/* return cfi_spansion_write_words(bank, word, address); */
- ERROR("cfi primary command set %i unimplemented - FIXME", cfi_info->pri_id);
+ LOG_ERROR("cfi primary command set %i unimplemented - FIXME", cfi_info->pri_id);
break;
default:
- ERROR("cfi primary command set %i unsupported", cfi_info->pri_id);
+ LOG_ERROR("cfi primary command set %i unsupported", cfi_info->pri_id);
break;
}
write_p = address & ~(bank->bus_width - 1);
if ((align = address - write_p) != 0)
{
- INFO("Fixup %d unaligned head bytes", align );
+ LOG_INFO("Fixup %d unaligned head bytes", align );
for (i = 0; i < bank->bus_width; i++)
current_word[i] = 0;
retval = cfi_spansion_write_block(bank, buffer, write_p, blk_count);
break;
default:
- ERROR("cfi primary command set %i unsupported", cfi_info->pri_id);
+ LOG_ERROR("cfi primary command set %i unsupported", cfi_info->pri_id);
retval = ERROR_FLASH_OPERATION_FAILED;
break;
}
case 2 : bufferwsize = buffersize / 2; break;
case 1 : bufferwsize = buffersize; break;
default:
- ERROR("Unsupported chip width %d", bank->chip_width);
+ LOG_ERROR("Unsupported chip width %d", bank->chip_width);
return ERROR_FLASH_OPERATION_FAILED;
}
{
if ((write_p & 0xff) == 0)
{
- INFO("Programming at %08x, count %08x bytes remaining", write_p, count);
+ LOG_INFO("Programming at %08x, count %08x bytes remaining", write_p, count);
}
if ((bufferwsize > 0) && (count >= buffersize) && !(write_p & buffermask))
{
/* handle unaligned tail bytes */
if (count > 0)
{
- INFO("Fixup %d unaligned tail bytes", count );
+ LOG_INFO("Fixup %d unaligned tail bytes", count );
copy_p = write_p;
for (i = 0; i < bank->bus_width; i++)
if ((pri_ext->_reversed_geometry) || (pri_ext->TopBottom == 3))
{
- DEBUG("swapping reversed erase region information on cmdset 0002 device");
+ LOG_DEBUG("swapping reversed erase region information on cmdset 0002 device");
for (i = 0; i < cfi_info->num_erase_regions / 2; i++)
{
cfi_info->qry[1] = cfi_query_u8(bank, 0, 0x11);
cfi_info->qry[2] = cfi_query_u8(bank, 0, 0x12);
- DEBUG("CFI qry returned: 0x%2.2x 0x%2.2x 0x%2.2x", cfi_info->qry[0], cfi_info->qry[1], cfi_info->qry[2]);
+ LOG_DEBUG("CFI qry returned: 0x%2.2x 0x%2.2x 0x%2.2x", cfi_info->qry[0], cfi_info->qry[1], cfi_info->qry[2]);
if ((cfi_info->qry[0] != 'Q') || (cfi_info->qry[1] != 'R') || (cfi_info->qry[2] != 'Y'))
{
cfi_info->alt_id = cfi_query_u16(bank, 0, 0x17);
cfi_info->alt_addr = cfi_query_u16(bank, 0, 0x19);
- DEBUG("qry: '%c%c%c', pri_id: 0x%4.4x, pri_addr: 0x%4.4x, alt_id: 0x%4.4x, alt_addr: 0x%4.4x", cfi_info->qry[0], cfi_info->qry[1], cfi_info->qry[2], cfi_info->pri_id, cfi_info->pri_addr, cfi_info->alt_id, cfi_info->alt_addr);
+ LOG_DEBUG("qry: '%c%c%c', pri_id: 0x%4.4x, pri_addr: 0x%4.4x, alt_id: 0x%4.4x, alt_addr: 0x%4.4x", cfi_info->qry[0], cfi_info->qry[1], cfi_info->qry[2], cfi_info->pri_id, cfi_info->pri_addr, cfi_info->alt_id, cfi_info->alt_addr);
cfi_info->vcc_min = cfi_query_u8(bank, 0, 0x1b);
cfi_info->vcc_max = cfi_query_u8(bank, 0, 0x1c);
cfi_info->block_erase_timeout_max = cfi_query_u8(bank, 0, 0x25);
cfi_info->chip_erase_timeout_max = cfi_query_u8(bank, 0, 0x26);
- DEBUG("Vcc min: %1.1x.%1.1x, Vcc max: %1.1x.%1.1x, Vpp min: %1.1x.%1.1x, Vpp max: %1.1x.%1.1x",
+ LOG_DEBUG("Vcc min: %1.1x.%1.1x, Vcc max: %1.1x.%1.1x, Vpp min: %1.1x.%1.1x, Vpp max: %1.1x.%1.1x",
(cfi_info->vcc_min & 0xf0) >> 4, cfi_info->vcc_min & 0x0f,
(cfi_info->vcc_max & 0xf0) >> 4, cfi_info->vcc_max & 0x0f,
(cfi_info->vpp_min & 0xf0) >> 4, cfi_info->vpp_min & 0x0f,
(cfi_info->vpp_max & 0xf0) >> 4, cfi_info->vpp_max & 0x0f);
- DEBUG("typ. word write timeout: %u, typ. buf write timeout: %u, typ. block erase timeout: %u, typ. chip erase timeout: %u", 1 << cfi_info->word_write_timeout_typ, 1 << cfi_info->buf_write_timeout_typ,
+ LOG_DEBUG("typ. word write timeout: %u, typ. buf write timeout: %u, typ. block erase timeout: %u, typ. chip erase timeout: %u", 1 << cfi_info->word_write_timeout_typ, 1 << cfi_info->buf_write_timeout_typ,
1 << cfi_info->block_erase_timeout_typ, 1 << cfi_info->chip_erase_timeout_typ);
- DEBUG("max. word write timeout: %u, max. buf write timeout: %u, max. block erase timeout: %u, max. chip erase timeout: %u", (1 << cfi_info->word_write_timeout_max) * (1 << cfi_info->word_write_timeout_typ),
+ LOG_DEBUG("max. word write timeout: %u, max. buf write timeout: %u, max. block erase timeout: %u, max. chip erase timeout: %u", (1 << cfi_info->word_write_timeout_max) * (1 << cfi_info->word_write_timeout_typ),
(1 << cfi_info->buf_write_timeout_max) * (1 << cfi_info->buf_write_timeout_typ),
(1 << cfi_info->block_erase_timeout_max) * (1 << cfi_info->block_erase_timeout_typ),
(1 << cfi_info->chip_erase_timeout_max) * (1 << cfi_info->chip_erase_timeout_typ));
cfi_info->max_buf_write_size = cfi_query_u16(bank, 0, 0x2a);
cfi_info->num_erase_regions = cfi_query_u8(bank, 0, 0x2c);
- DEBUG("size: 0x%x, interface desc: %i, max buffer write size: %x", 1 << cfi_info->dev_size, cfi_info->interface_desc, (1 << cfi_info->max_buf_write_size));
+ LOG_DEBUG("size: 0x%x, interface desc: %i, max buffer write size: %x", 1 << cfi_info->dev_size, cfi_info->interface_desc, (1 << cfi_info->max_buf_write_size));
if (((1 << cfi_info->dev_size) * bank->bus_width / bank->chip_width) != bank->size)
{
- WARNING("configuration specifies 0x%x size, but a 0x%x size flash was found", bank->size, 1 << cfi_info->dev_size);
+ LOG_WARNING("configuration specifies 0x%x size, but a 0x%x size flash was found", bank->size, 1 << cfi_info->dev_size);
}
if (cfi_info->num_erase_regions)
for (i = 0; i < cfi_info->num_erase_regions; i++)
{
cfi_info->erase_region_info[i] = cfi_query_u32(bank, 0, 0x2d + (4 * i));
- DEBUG("erase region[%i]: %i blocks of size 0x%x", i, (cfi_info->erase_region_info[i] & 0xffff) + 1, (cfi_info->erase_region_info[i] >> 16) * 256);
+ LOG_DEBUG("erase region[%i]: %i blocks of size 0x%x", i, (cfi_info->erase_region_info[i] & 0xffff) + 1, (cfi_info->erase_region_info[i] >> 16) * 256);
}
}
else
cfi_read_0002_pri_ext(bank);
break;
default:
- ERROR("cfi primary command set %i unsupported", cfi_info->pri_id);
+ LOG_ERROR("cfi primary command set %i unsupported", cfi_info->pri_id);
break;
}
cfi_fixup(bank, cfi_0002_fixups);
break;
default:
- ERROR("cfi primary command set %i unsupported", cfi_info->pri_id);
+ LOG_ERROR("cfi primary command set %i unsupported", cfi_info->pri_id);
break;
}
/* make sure we have a working area */
if (target_alloc_working_area(target, 20, &cfi_info->erase_check_algorithm) != ERROR_OK)
{
- WARNING("no working area available, falling back to slow memory reads");
+ LOG_WARNING("no working area available, falling back to slow memory reads");
}
else
{
return cfi_spansion_protect_check(bank);
break;
default:
- ERROR("cfi primary command set %i unsupported", cfi_info->pri_id);
+ LOG_ERROR("cfi primary command set %i unsupported", cfi_info->pri_id);
break;
}
cfi_spansion_info(bank, buf, buf_size);
break;
default:
- ERROR("cfi primary command set %i unsupported", cfi_info->pri_id);
+ LOG_ERROR("cfi primary command set %i unsupported", cfi_info->pri_id);
break;
}
}
projects / fw / openocd / blobdiff