#include "config.h"
#endif
-#include "replacements.h"
-
#include "at91sam7.h"
-
-#include "flash.h"
-#include "target.h"
-#include "log.h"
#include "binarybuffer.h"
-#include "types.h"
-
-#include <stdlib.h>
-#include <string.h>
-#include <unistd.h>
-
-int at91sam7_register_commands(struct command_context_s *cmd_ctx);
-int at91sam7_flash_bank_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc, struct flash_bank_s *bank);
-int at91sam7_erase(struct flash_bank_s *bank, int first, int last);
-int at91sam7_protect(struct flash_bank_s *bank, int set, int first, int last);
-int at91sam7_write(struct flash_bank_s *bank, u8 *buffer, u32 offset, u32 count);
-int at91sam7_probe(struct flash_bank_s *bank);
-int at91sam7_auto_probe(struct flash_bank_s *bank);
-int at91sam7_erase_check(struct flash_bank_s *bank);
-int at91sam7_protect_check(struct flash_bank_s *bank);
-int at91sam7_info(struct flash_bank_s *bank, char *buf, int buf_size);
-
-u32 at91sam7_get_flash_status(target_t *target, int bank_number);
-void at91sam7_set_flash_mode(flash_bank_t *bank, int mode);
-u32 at91sam7_wait_status_busy(flash_bank_t *bank, u32 waitbits, int timeout);
-int at91sam7_flash_command(struct flash_bank_s *bank, u8 cmd, u16 pagen);
-int at91sam7_handle_gpnvm_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
+
+
+static int at91sam7_register_commands(struct command_context_s *cmd_ctx);
+static int at91sam7_flash_bank_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc, struct flash_bank_s *bank);
+static int at91sam7_erase(struct flash_bank_s *bank, int first, int last);
+static int at91sam7_protect(struct flash_bank_s *bank, int set, int first, int last);
+static int at91sam7_write(struct flash_bank_s *bank, uint8_t *buffer, uint32_t offset, uint32_t count);
+static int at91sam7_probe(struct flash_bank_s *bank);
+//static int at91sam7_auto_probe(struct flash_bank_s *bank);
+static int at91sam7_erase_check(struct flash_bank_s *bank);
+static int at91sam7_protect_check(struct flash_bank_s *bank);
+static int at91sam7_info(struct flash_bank_s *bank, char *buf, int buf_size);
+
+static uint32_t at91sam7_get_flash_status(target_t *target, int bank_number);
+static void at91sam7_set_flash_mode(flash_bank_t *bank, int mode);
+static uint32_t at91sam7_wait_status_busy(flash_bank_t *bank, uint32_t waitbits, int timeout);
+static int at91sam7_flash_command(struct flash_bank_s *bank, uint8_t cmd, uint16_t pagen);
+static int at91sam7_handle_gpnvm_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
flash_driver_t at91sam7_flash =
{
- .name = "at91sam7_new",
- .register_commands = at91sam7_register_commands,
- .flash_bank_command = at91sam7_flash_bank_command,
- .erase = at91sam7_erase,
- .protect = at91sam7_protect,
- .write = at91sam7_write,
- .probe = at91sam7_probe,
- .auto_probe = at91sam7_probe,
- .erase_check = at91sam7_erase_check,
- .protect_check = at91sam7_protect_check,
- .info = at91sam7_info
+ .name = "at91sam7",
+ .register_commands = at91sam7_register_commands,
+ .flash_bank_command = at91sam7_flash_bank_command,
+ .erase = at91sam7_erase,
+ .protect = at91sam7_protect,
+ .write = at91sam7_write,
+ .probe = at91sam7_probe,
+ .auto_probe = at91sam7_probe,
+ .erase_check = at91sam7_erase_check,
+ .protect_check = at91sam7_protect_check,
+ .info = at91sam7_info
};
-
-u32 MC_FMR[4] = { 0xFFFFFF60, 0xFFFFFF70, 0xFFFFFF80, 0xFFFFFF90 };
-u32 MC_FCR[4] = { 0xFFFFFF64, 0xFFFFFF74, 0xFFFFFF84, 0xFFFFFF94 };
-u32 MC_FSR[4] = { 0xFFFFFF68, 0xFFFFFF78, 0xFFFFFF88, 0xFFFFFF98 };
-
-char * EPROC[8]= {"Unknown","ARM946-E","ARM7TDMI","Unknown","ARM920T","ARM926EJ-S","Unknown","Unknown"};
-
-long SRAMSIZ[16] = {
- -1,
- 0x0400, /* 1K */
- 0x0800, /* 2K */
- -1,
- 0x1c000, /* 112K */
- 0x1000, /* 4K */
- 0x14000, /* 80K */
- 0x28000, /* 160K */
- 0x2000, /* 8K */
- 0x4000, /* 16K */
- 0x8000, /* 32K */
- 0x10000, /* 64K */
- 0x20000, /* 128K */
- 0x40000, /* 256K */
- 0x18000, /* 96K */
- 0x80000, /* 512K */
+static uint32_t MC_FMR[4] = { 0xFFFFFF60, 0xFFFFFF70, 0xFFFFFF80, 0xFFFFFF90 };
+static uint32_t MC_FCR[4] = { 0xFFFFFF64, 0xFFFFFF74, 0xFFFFFF84, 0xFFFFFF94 };
+static uint32_t MC_FSR[4] = { 0xFFFFFF68, 0xFFFFFF78, 0xFFFFFF88, 0xFFFFFF98 };
+
+static char * EPROC[8]= {"Unknown","ARM946-E","ARM7TDMI","Unknown","ARM920T","ARM926EJ-S","Unknown","Unknown"};
+
+#if 0
+static long SRAMSIZ[16] = {
+ -1,
+ 0x0400, /* 1K */
+ 0x0800, /* 2K */
+ -1,
+ 0x1c000, /* 112K */
+ 0x1000, /* 4K */
+ 0x14000, /* 80K */
+ 0x28000, /* 160K */
+ 0x2000, /* 8K */
+ 0x4000, /* 16K */
+ 0x8000, /* 32K */
+ 0x10000, /* 64K */
+ 0x20000, /* 128K */
+ 0x40000, /* 256K */
+ 0x18000, /* 96K */
+ 0x80000, /* 512K */
};
+#endif
-int at91sam7_register_commands(struct command_context_s *cmd_ctx)
+static int at91sam7_register_commands(struct command_context_s *cmd_ctx)
{
- command_t *at91sam7_cmd = register_command(cmd_ctx, NULL, "at91sam7_new", NULL, COMMAND_ANY, NULL);
+ command_t *at91sam7_cmd = register_command(cmd_ctx, NULL, "at91sam7", NULL, COMMAND_ANY, NULL);
- register_command(cmd_ctx, at91sam7_cmd, "gpnvm", at91sam7_handle_gpnvm_command, COMMAND_EXEC,
- "at91sam7 gpnvm <bit> set|clear, set or clear one gpnvm bit");
- return ERROR_OK;
+ register_command(cmd_ctx, at91sam7_cmd, "gpnvm", at91sam7_handle_gpnvm_command, COMMAND_EXEC,
+ "at91sam7 gpnvm <bit> set | clear, set or clear one gpnvm bit");
+ return ERROR_OK;
}
-u32 at91sam7_get_flash_status(target_t *target, int bank_number)
+static uint32_t at91sam7_get_flash_status(target_t *target, int bank_number)
{
- u32 fsr;
- target_read_u32(target, MC_FSR[bank_number], &fsr);
+ uint32_t fsr;
+ target_read_u32(target, MC_FSR[bank_number], &fsr);
- return fsr;
+ return fsr;
}
/* Read clock configuration and set at91sam7_info->mck_freq */
-void at91sam7_read_clock_info(flash_bank_t *bank)
+static void at91sam7_read_clock_info(flash_bank_t *bank)
{
- at91sam7_flash_bank_t *at91sam7_info = bank->driver_priv;
- target_t *target = bank->target;
- u32 mckr, mcfr, pllr, mor;
- unsigned long tmp = 0, mainfreq;
-
- /* Read Clock Generator Main Oscillator Register */
- target_read_u32(target, CKGR_MOR, &mor);
- /* Read Clock Generator Main Clock Frequency Register */
- target_read_u32(target, CKGR_MCFR, &mcfr);
- /* Read Master Clock Register*/
- target_read_u32(target, PMC_MCKR, &mckr);
- /* Read Clock Generator PLL Register */
- target_read_u32(target, CKGR_PLLR, &pllr);
-
- at91sam7_info->mck_valid = 0;
- at91sam7_info->mck_freq = 0;
- switch (mckr & PMC_MCKR_CSS)
- {
- case 0: /* Slow Clock */
- at91sam7_info->mck_valid = 1;
- tmp = RC_FREQ;
- break;
-
- case 1: /* Main Clock */
- if ((mcfr & CKGR_MCFR_MAINRDY) &&
- (at91sam7_info->ext_freq == 0))
- {
- at91sam7_info->mck_valid = 1;
- tmp = RC_FREQ / 16ul * (mcfr & 0xffff);
- }
- else if (at91sam7_info->ext_freq != 0)
- {
- at91sam7_info->mck_valid = 1;
- tmp = at91sam7_info->ext_freq;
- }
- break;
-
- case 2: /* Reserved */
- break;
-
- case 3: /* PLL Clock */
- if ((mcfr & CKGR_MCFR_MAINRDY) &&
- (at91sam7_info->ext_freq == 0))
- {
- target_read_u32(target, CKGR_PLLR, &pllr);
- if (!(pllr & CKGR_PLLR_DIV))
- break; /* 0 Hz */
- at91sam7_info->mck_valid = 1;
- mainfreq = RC_FREQ / 16ul * (mcfr & 0xffff);
- /* Integer arithmetic should have sufficient precision
- as long as PLL is properly configured. */
- tmp = mainfreq / (pllr & CKGR_PLLR_DIV)*
- (((pllr & CKGR_PLLR_MUL) >> 16) + 1);
- }
- else if ((at91sam7_info->ext_freq != 0) &&
- ((pllr&CKGR_PLLR_DIV) != 0))
- {
- at91sam7_info->mck_valid = 1;
- tmp = at91sam7_info->ext_freq / (pllr&CKGR_PLLR_DIV)*
- (((pllr & CKGR_PLLR_MUL) >> 16) + 1);
- }
- break;
- }
-
- /* Prescaler adjust */
- if ( (((mckr & PMC_MCKR_PRES) >> 2) == 7) || (tmp == 0) )
- {
- at91sam7_info->mck_valid = 0;
- at91sam7_info->mck_freq = 0;
- }
- else if (((mckr & PMC_MCKR_PRES) >> 2) != 0)
- at91sam7_info->mck_freq = tmp >> ((mckr & PMC_MCKR_PRES) >> 2);
- else
- at91sam7_info->mck_freq = tmp;
+ at91sam7_flash_bank_t *at91sam7_info = bank->driver_priv;
+ target_t *target = bank->target;
+ uint32_t mckr, mcfr, pllr, mor;
+ unsigned long tmp = 0, mainfreq;
+
+ /* Read Clock Generator Main Oscillator Register */
+ target_read_u32(target, CKGR_MOR, &mor);
+ /* Read Clock Generator Main Clock Frequency Register */
+ target_read_u32(target, CKGR_MCFR, &mcfr);
+ /* Read Master Clock Register*/
+ target_read_u32(target, PMC_MCKR, &mckr);
+ /* Read Clock Generator PLL Register */
+ target_read_u32(target, CKGR_PLLR, &pllr);
+
+ at91sam7_info->mck_valid = 0;
+ at91sam7_info->mck_freq = 0;
+ switch (mckr & PMC_MCKR_CSS)
+ {
+ case 0: /* Slow Clock */
+ at91sam7_info->mck_valid = 1;
+ tmp = RC_FREQ;
+ break;
+
+ case 1: /* Main Clock */
+ if ((mcfr & CKGR_MCFR_MAINRDY) &&
+ (at91sam7_info->ext_freq == 0))
+ {
+ at91sam7_info->mck_valid = 1;
+ tmp = RC_FREQ / 16ul * (mcfr & 0xffff);
+ }
+ else if (at91sam7_info->ext_freq != 0)
+ {
+ at91sam7_info->mck_valid = 1;
+ tmp = at91sam7_info->ext_freq;
+ }
+ break;
+
+ case 2: /* Reserved */
+ break;
+
+ case 3: /* PLL Clock */
+ if ((mcfr & CKGR_MCFR_MAINRDY) &&
+ (at91sam7_info->ext_freq == 0))
+ {
+ target_read_u32(target, CKGR_PLLR, &pllr);
+ if (!(pllr & CKGR_PLLR_DIV))
+ break; /* 0 Hz */
+ at91sam7_info->mck_valid = 1;
+ mainfreq = RC_FREQ / 16ul * (mcfr & 0xffff);
+ /* Integer arithmetic should have sufficient precision
+ * as long as PLL is properly configured. */
+ tmp = mainfreq / (pllr & CKGR_PLLR_DIV)*
+ (((pllr & CKGR_PLLR_MUL) >> 16) + 1);
+ }
+ else if ((at91sam7_info->ext_freq != 0) &&
+ ((pllr&CKGR_PLLR_DIV) != 0))
+ {
+ at91sam7_info->mck_valid = 1;
+ tmp = at91sam7_info->ext_freq / (pllr&CKGR_PLLR_DIV)*
+ (((pllr & CKGR_PLLR_MUL) >> 16) + 1);
+ }
+ break;
+ }
+
+ /* Prescaler adjust */
+ if ((((mckr & PMC_MCKR_PRES) >> 2) == 7) || (tmp == 0) )
+ {
+ at91sam7_info->mck_valid = 0;
+ at91sam7_info->mck_freq = 0;
+ }
+ else if (((mckr & PMC_MCKR_PRES) >> 2) != 0)
+ at91sam7_info->mck_freq = tmp >> ((mckr & PMC_MCKR_PRES) >> 2);
+ else
+ at91sam7_info->mck_freq = tmp;
}
/* Setup the timimg registers for nvbits or normal flash */
-void at91sam7_set_flash_mode(flash_bank_t *bank, int mode)
+static void at91sam7_set_flash_mode(flash_bank_t *bank, int mode)
{
- u32 fmr, fmcn = 0, fws = 0;
- at91sam7_flash_bank_t *at91sam7_info = bank->driver_priv;
- target_t *target = bank->target;
-
- if (mode && (mode != at91sam7_info->flashmode))
- {
- /* Always round up (ceil) */
- if (mode == FMR_TIMING_NVBITS)
- {
- if (at91sam7_info->cidr_arch == 0x60)
- {
- /* AT91SAM7A3 uses master clocks in 100 ns */
- fmcn = (at91sam7_info->mck_freq/10000000ul)+1;
- }
- else
- {
- /* master clocks in 1uS for ARCH 0x7 types */
- fmcn = (at91sam7_info->mck_freq/1000000ul)+1;
- }
- }
- else if (mode == FMR_TIMING_FLASH)
- {
- /* main clocks in 1.5uS */
- fmcn = (at91sam7_info->mck_freq/1000000ul)+
- (at91sam7_info->mck_freq/2000000ul)+1;
- }
-
- /* hard overclocking */
- if (fmcn > 0xFF)
- fmcn = 0xFF;
-
- /* Only allow fmcn=0 if clock period is > 30 us = 33kHz. */
- if (at91sam7_info->mck_freq <= 33333ul)
- fmcn = 0;
- /* Only allow fws=0 if clock frequency is < 30 MHz. */
- if (at91sam7_info->mck_freq > 30000000ul)
- fws = 1;
-
- LOG_DEBUG("fmcn[%i]: %i", bank->bank_number, fmcn);
- fmr = fmcn << 16 | fws << 8;
- target_write_u32(target, MC_FMR[bank->bank_number], fmr);
- }
-
- at91sam7_info->flashmode = mode;
+ uint32_t fmr, fmcn = 0, fws = 0;
+ at91sam7_flash_bank_t *at91sam7_info = bank->driver_priv;
+ target_t *target = bank->target;
+
+ if (mode && (mode != at91sam7_info->flashmode))
+ {
+ /* Always round up (ceil) */
+ if (mode == FMR_TIMING_NVBITS)
+ {
+ if (at91sam7_info->cidr_arch == 0x60)
+ {
+ /* AT91SAM7A3 uses master clocks in 100 ns */
+ fmcn = (at91sam7_info->mck_freq/10000000ul) + 1;
+ }
+ else
+ {
+ /* master clocks in 1uS for ARCH 0x7 types */
+ fmcn = (at91sam7_info->mck_freq/1000000ul) + 1;
+ }
+ }
+ else if (mode == FMR_TIMING_FLASH)
+ {
+ /* main clocks in 1.5uS */
+ fmcn = (at91sam7_info->mck_freq/1000000ul)+
+ (at91sam7_info->mck_freq/2000000ul) + 1;
+ }
+
+ /* hard overclocking */
+ if (fmcn > 0xFF)
+ fmcn = 0xFF;
+
+ /* Only allow fmcn = 0 if clock period is > 30 us = 33kHz. */
+ if (at91sam7_info->mck_freq <= 33333ul)
+ fmcn = 0;
+ /* Only allow fws = 0 if clock frequency is < 30 MHz. */
+ if (at91sam7_info->mck_freq > 30000000ul)
+ fws = 1;
+
+ LOG_DEBUG("fmcn[%i]: %i", bank->bank_number, (int)(fmcn));
+ fmr = fmcn << 16 | fws << 8;
+ target_write_u32(target, MC_FMR[bank->bank_number], fmr);
+ }
+
+ at91sam7_info->flashmode = mode;
}
-u32 at91sam7_wait_status_busy(flash_bank_t *bank, u32 waitbits, int timeout)
+static uint32_t at91sam7_wait_status_busy(flash_bank_t *bank, uint32_t waitbits, int timeout)
{
- u32 status;
-
- while ((!((status = at91sam7_get_flash_status(bank->target, bank->bank_number)) & waitbits)) && (timeout-- > 0))
- {
- LOG_DEBUG("status[%i]: 0x%x", bank->bank_number, status);
- alive_sleep(1);
- }
-
- LOG_DEBUG("status[%i]: 0x%x", bank->bank_number, status);
-
- if (status & 0x0C)
- {
- LOG_ERROR("status register: 0x%x", status);
- if (status & 0x4)
- LOG_ERROR("Lock Error Bit Detected, Operation Abort");
- if (status & 0x8)
- LOG_ERROR("Invalid command and/or bad keyword, Operation Abort");
- if (status & 0x10)
- LOG_ERROR("Security Bit Set, Operation Abort");
- }
-
- return status;
+ uint32_t status;
+
+ while ((!((status = at91sam7_get_flash_status(bank->target, bank->bank_number)) & waitbits)) && (timeout-- > 0))
+ {
+ LOG_DEBUG("status[%i]: 0x%" PRIx32 "", (int)bank->bank_number, status);
+ alive_sleep(1);
+ }
+
+ LOG_DEBUG("status[%i]: 0x%" PRIx32 "", bank->bank_number, status);
+
+ if (status & 0x0C)
+ {
+ LOG_ERROR("status register: 0x%" PRIx32 "", status);
+ if (status & 0x4)
+ LOG_ERROR("Lock Error Bit Detected, Operation Abort");
+ if (status & 0x8)
+ LOG_ERROR("Invalid command and/or bad keyword, Operation Abort");
+ if (status & 0x10)
+ LOG_ERROR("Security Bit Set, Operation Abort");
+ }
+
+ return status;
}
/* Send one command to the AT91SAM flash controller */
-int at91sam7_flash_command(struct flash_bank_s *bank, u8 cmd, u16 pagen)
+static int at91sam7_flash_command(struct flash_bank_s *bank, uint8_t cmd, uint16_t pagen)
{
- u32 fcr;
- at91sam7_flash_bank_t *at91sam7_info = bank->driver_priv;
- target_t *target = bank->target;
-
- fcr = (0x5A<<24) | ((pagen&0x3FF)<<8) | cmd;
- target_write_u32(target, MC_FCR[bank->bank_number], fcr);
- LOG_DEBUG("Flash command: 0x%x, flash bank: %i, page number: %u", fcr, bank->bank_number+1, pagen);
-
- if ((at91sam7_info->cidr_arch == 0x60)&&((cmd==SLB)|(cmd==CLB)))
- {
- /* Lock bit manipulation on AT91SAM7A3 waits for FC_FSR bit 1, EOL */
- if (at91sam7_wait_status_busy(bank, MC_FSR_EOL, 10)&0x0C)
- {
- return ERROR_FLASH_OPERATION_FAILED;
- }
- return ERROR_OK;
- }
-
- if (at91sam7_wait_status_busy(bank, MC_FSR_FRDY, 10)&0x0C)
- {
- return ERROR_FLASH_OPERATION_FAILED;
- }
-
- return ERROR_OK;
+ uint32_t fcr;
+ at91sam7_flash_bank_t *at91sam7_info = bank->driver_priv;
+ target_t *target = bank->target;
+
+ fcr = (0x5A << 24) | ((pagen&0x3FF) << 8) | cmd;
+ target_write_u32(target, MC_FCR[bank->bank_number], fcr);
+ LOG_DEBUG("Flash command: 0x%" PRIx32 ", flash bank: %i, page number: %u", fcr, bank->bank_number + 1, pagen);
+
+ if ((at91sam7_info->cidr_arch == 0x60) && ((cmd == SLB) | (cmd == CLB)))
+ {
+ /* Lock bit manipulation on AT91SAM7A3 waits for FC_FSR bit 1, EOL */
+ if (at91sam7_wait_status_busy(bank, MC_FSR_EOL, 10)&0x0C)
+ {
+ return ERROR_FLASH_OPERATION_FAILED;
+ }
+ return ERROR_OK;
+ }
+
+ if (at91sam7_wait_status_busy(bank, MC_FSR_FRDY, 10)&0x0C)
+ {
+ return ERROR_FLASH_OPERATION_FAILED;
+ }
+
+ return ERROR_OK;
}
/* Read device id register, main clock frequency register and fill in driver info structure */
-int at91sam7_read_part_info(struct flash_bank_s *bank)
+static int at91sam7_read_part_info(struct flash_bank_s *bank)
{
- flash_bank_t *t_bank = bank;
- at91sam7_flash_bank_t *at91sam7_info;
- target_t *target = t_bank->target;
-
- u16 bnk, sec;
- u16 arch;
- u32 cidr, status;
- u8 banks_num;
- u16 num_nvmbits;
- u16 sectors_num;
- u16 pages_per_sector;
- u16 page_size;
- u32 ext_freq;
- u32 bank_size;
- u32 base_address = 0;
- char *target_name = "Unknown";
-
- at91sam7_info = t_bank->driver_priv;
-
- if (at91sam7_info->cidr != 0)
- {
- /* flash already configured, update clock and check for protected sectors */
- flash_bank_t *fb = bank;
- t_bank = fb;
-
- while (t_bank)
- {
- /* re-calculate master clock frequency */
- at91sam7_read_clock_info(t_bank);
-
- /* no timming */
- at91sam7_set_flash_mode(t_bank, FMR_TIMING_NONE);
-
- /* check protect state */
- at91sam7_protect_check(t_bank);
-
- t_bank = fb->next;
- fb = t_bank;
- }
-
- return ERROR_OK;
- }
-
- /* Read and parse chip identification register */
- target_read_u32(target, DBGU_CIDR, &cidr);
- if (cidr == 0)
- {
- LOG_WARNING("Cannot identify target as an AT91SAM");
- return ERROR_FLASH_OPERATION_FAILED;
- }
-
- if (at91sam7_info->flash_autodetection == 0)
- {
- /* banks and sectors are already created, based on data from input file */
- flash_bank_t *fb = bank;
- t_bank = fb;
- while (t_bank)
- {
- at91sam7_info = t_bank->driver_priv;
-
- at91sam7_info->cidr = cidr;
- at91sam7_info->cidr_ext = (cidr>>31)&0x0001;
- at91sam7_info->cidr_nvptyp = (cidr>>28)&0x0007;
- at91sam7_info->cidr_arch = (cidr>>20)&0x00FF;
- at91sam7_info->cidr_sramsiz = (cidr>>16)&0x000F;
- at91sam7_info->cidr_nvpsiz2 = (cidr>>12)&0x000F;
- at91sam7_info->cidr_nvpsiz = (cidr>>8)&0x000F;
- at91sam7_info->cidr_eproc = (cidr>>5)&0x0007;
- at91sam7_info->cidr_version = cidr&0x001F;
-
- /* calculate master clock frequency */
- at91sam7_read_clock_info(t_bank);
-
- /* no timming */
- at91sam7_set_flash_mode(t_bank, FMR_TIMING_NONE);
-
- /* check protect state */
- at91sam7_protect_check(t_bank);
-
- t_bank = fb->next;
- fb = t_bank;
- }
-
- return ERROR_OK;
- }
-
- arch = (cidr>>20)&0x00FF;
-
- /* check flash size */
- switch ((cidr>>8)&0x000F)
- {
- case FLASH_SIZE_8KB:
- break;
-
- case FLASH_SIZE_16KB:
- banks_num = 1;
- sectors_num = 8;
- pages_per_sector = 32;
- page_size = 64;
- base_address = 0x00100000;
- if (arch == 0x70)
- {
- num_nvmbits = 2;
- target_name = "AT91SAM7S161/16";
- }
- break;
-
- case FLASH_SIZE_32KB:
- banks_num = 1;
- sectors_num = 8;
- pages_per_sector = 32;
- page_size = 128;
- base_address = 0x00100000;
- if (arch == 0x70)
- {
- num_nvmbits = 2;
- target_name = "AT91SAM7S321/32";
- }
- if (arch == 0x72)
- {
- num_nvmbits = 3;
- target_name = "AT91SAM7SE32";
- }
- break;
-
- case FLASH_SIZE_64KB:
- banks_num = 1;
- sectors_num = 16;
- pages_per_sector = 32;
- page_size = 128;
- base_address = 0x00100000;
- if (arch == 0x70)
- {
- num_nvmbits = 2;
- target_name = "AT91SAM7S64";
- }
- break;
-
- case FLASH_SIZE_128KB:
- banks_num = 1;
- sectors_num = 8;
- pages_per_sector = 64;
- page_size = 256;
- base_address = 0x00100000;
- if (arch == 0x70)
- {
- num_nvmbits = 2;
- target_name = "AT91SAM7S128";
- }
- if (arch == 0x71)
- {
- num_nvmbits = 3;
- target_name = "AT91SAM7XC128";
- }
- if (arch == 0x72)
- {
- num_nvmbits = 3;
- target_name = "AT91SAM7SE128";
- }
- if (arch == 0x75)
- {
- num_nvmbits = 3;
- target_name = "AT91SAM7X128";
- }
- break;
-
- case FLASH_SIZE_256KB:
- banks_num = 1;
- sectors_num = 16;
- pages_per_sector = 64;
- page_size = 256;
- base_address = 0x00100000;
- if (arch == 0x60)
- {
- num_nvmbits = 3;
- target_name = "AT91SAM7A3";
- }
- if (arch == 0x70)
- {
- num_nvmbits = 2;
- target_name = "AT91SAM7S256";
- }
- if (arch == 0x71)
- {
- num_nvmbits = 3;
- target_name = "AT91SAM7XC256";
- }
- if (arch == 0x72)
- {
- num_nvmbits = 3;
- target_name = "AT91SAM7SE256";
- }
- if (arch == 0x75)
- {
- num_nvmbits = 3;
- target_name = "AT91SAM7X256";
- }
- break;
-
- case FLASH_SIZE_512KB:
- banks_num = 2;
- sectors_num = 16;
- pages_per_sector = 64;
- page_size = 256;
- base_address = 0x00100000;
- if (arch == 0x70)
- {
- num_nvmbits = 2;
- target_name = "AT91SAM7S512";
- }
- if (arch == 0x71)
- {
- num_nvmbits = 3;
- target_name = "AT91SAM7XC512";
- }
- if (arch == 0x72)
- {
- num_nvmbits = 3;
- target_name = "AT91SAM7SE512";
- }
- if (arch == 0x75)
- {
- num_nvmbits = 3;
- target_name = "AT91SAM7X512";
- }
- break;
-
- case FLASH_SIZE_1024KB:
- break;
-
- case FLASH_SIZE_2048KB:
- break;
- }
-
- if (strcmp(target_name, "Unknown") == 0)
- {
- LOG_ERROR("Target autodetection failed! Please specify target parameters in configuration file");
- return ERROR_FLASH_OPERATION_FAILED;
- }
-
- ext_freq = at91sam7_info->ext_freq;
-
- /* calculate bank size */
- bank_size = sectors_num * pages_per_sector * page_size;
-
- for (bnk=0; bnk<banks_num; bnk++)
- {
- if (bnk > 0)
- {
- /* create a new flash bank element */
- flash_bank_t *fb = malloc(sizeof(flash_bank_t));
- fb->target = target;
- fb->driver = &at91sam7_flash;
- fb->driver_priv = malloc(sizeof(at91sam7_flash_bank_t));
- fb->next = NULL;
-
- /* link created bank in 'flash_banks' list and redirect t_bank */
- t_bank->next = fb;
- t_bank = fb;
- }
-
- t_bank->bank_number = bnk;
- t_bank->base = base_address + bnk * bank_size;
- t_bank->size = bank_size;
- t_bank->chip_width = 0;
- t_bank->bus_width = 4;
- t_bank->num_sectors = sectors_num;
-
- /* allocate sectors */
- t_bank->sectors = malloc(sectors_num * sizeof(flash_sector_t));
- for (sec=0; sec<sectors_num; sec++)
- {
- t_bank->sectors[sec].offset = sec * pages_per_sector * page_size;
- t_bank->sectors[sec].size = pages_per_sector * page_size;
- t_bank->sectors[sec].is_erased = -1;
- t_bank->sectors[sec].is_protected = -1;
- }
-
- at91sam7_info = t_bank->driver_priv;
-
- at91sam7_info->cidr = cidr;
- at91sam7_info->cidr_ext = (cidr>>31)&0x0001;
- at91sam7_info->cidr_nvptyp = (cidr>>28)&0x0007;
- at91sam7_info->cidr_arch = (cidr>>20)&0x00FF;
- at91sam7_info->cidr_sramsiz = (cidr>>16)&0x000F;
- at91sam7_info->cidr_nvpsiz2 = (cidr>>12)&0x000F;
- at91sam7_info->cidr_nvpsiz = (cidr>>8)&0x000F;
- at91sam7_info->cidr_eproc = (cidr>>5)&0x0007;
- at91sam7_info->cidr_version = cidr&0x001F;
-
- at91sam7_info->target_name = target_name;
- at91sam7_info->flashmode = 0;
- at91sam7_info->ext_freq = ext_freq;
- at91sam7_info->num_nvmbits = num_nvmbits;
- at91sam7_info->num_nvmbits_on = 0;
- at91sam7_info->pagesize = page_size;
- at91sam7_info->pages_per_sector = pages_per_sector;
-
- /* calculate master clock frequency */
- at91sam7_read_clock_info(t_bank);
-
- /* no timming */
- at91sam7_set_flash_mode(t_bank, FMR_TIMING_NONE);
-
- /* check protect state */
- at91sam7_protect_check(t_bank);
- }
-
- LOG_DEBUG("nvptyp: 0x%3.3x, arch: 0x%4.4x", at91sam7_info->cidr_nvptyp, at91sam7_info->cidr_arch );
-
- return ERROR_OK;
+ flash_bank_t *t_bank = bank;
+ at91sam7_flash_bank_t *at91sam7_info;
+ target_t *target = t_bank->target;
+
+ uint16_t bnk, sec;
+ uint16_t arch;
+ uint32_t cidr;
+ uint8_t banks_num = 0;
+ uint16_t num_nvmbits = 0;
+ uint16_t sectors_num = 0;
+ uint16_t pages_per_sector = 0;
+ uint16_t page_size = 0;
+ uint32_t ext_freq;
+ uint32_t bank_size;
+ uint32_t base_address = 0;
+ char *target_name = "Unknown";
+
+ at91sam7_info = t_bank->driver_priv;
+
+ if (at91sam7_info->cidr != 0)
+ {
+ /* flash already configured, update clock and check for protected sectors */
+ flash_bank_t *fb = bank;
+ t_bank = fb;
+
+ while (t_bank)
+ {
+ /* re-calculate master clock frequency */
+ at91sam7_read_clock_info(t_bank);
+
+ /* no timming */
+ at91sam7_set_flash_mode(t_bank, FMR_TIMING_NONE);
+
+ /* check protect state */
+ at91sam7_protect_check(t_bank);
+
+ t_bank = fb->next;
+ fb = t_bank;
+ }
+
+ return ERROR_OK;
+ }
+
+ /* Read and parse chip identification register */
+ target_read_u32(target, DBGU_CIDR, &cidr);
+ if (cidr == 0)
+ {
+ LOG_WARNING("Cannot identify target as an AT91SAM");
+ return ERROR_FLASH_OPERATION_FAILED;
+ }
+
+ if (at91sam7_info->flash_autodetection == 0)
+ {
+ /* banks and sectors are already created, based on data from input file */
+ flash_bank_t *fb = bank;
+ t_bank = fb;
+ while (t_bank)
+ {
+ at91sam7_info = t_bank->driver_priv;
+
+ at91sam7_info->cidr = cidr;
+ at91sam7_info->cidr_ext = (cidr >> 31)&0x0001;
+ at91sam7_info->cidr_nvptyp = (cidr >> 28)&0x0007;
+ at91sam7_info->cidr_arch = (cidr >> 20)&0x00FF;
+ at91sam7_info->cidr_sramsiz = (cidr >> 16)&0x000F;
+ at91sam7_info->cidr_nvpsiz2 = (cidr >> 12)&0x000F;
+ at91sam7_info->cidr_nvpsiz = (cidr >> 8)&0x000F;
+ at91sam7_info->cidr_eproc = (cidr >> 5)&0x0007;
+ at91sam7_info->cidr_version = cidr&0x001F;
+
+ /* calculate master clock frequency */
+ at91sam7_read_clock_info(t_bank);
+
+ /* no timming */
+ at91sam7_set_flash_mode(t_bank, FMR_TIMING_NONE);
+
+ /* check protect state */
+ at91sam7_protect_check(t_bank);
+
+ t_bank = fb->next;
+ fb = t_bank;
+ }
+
+ return ERROR_OK;
+ }
+
+ arch = (cidr >> 20)&0x00FF;
+
+ /* check flash size */
+ switch ((cidr >> 8)&0x000F)
+ {
+ case FLASH_SIZE_8KB:
+ break;
+
+ case FLASH_SIZE_16KB:
+ banks_num = 1;
+ sectors_num = 8;
+ pages_per_sector = 32;
+ page_size = 64;
+ base_address = 0x00100000;
+ if (arch == 0x70)
+ {
+ num_nvmbits = 2;
+ target_name = "AT91SAM7S161/16";
+ }
+ break;
+
+ case FLASH_SIZE_32KB:
+ banks_num = 1;
+ sectors_num = 8;
+ pages_per_sector = 32;
+ page_size = 128;
+ base_address = 0x00100000;
+ if (arch == 0x70)
+ {
+ num_nvmbits = 2;
+ target_name = "AT91SAM7S321/32";
+ }
+ if (arch == 0x72)
+ {
+ num_nvmbits = 3;
+ target_name = "AT91SAM7SE32";
+ }
+ break;
+
+ case FLASH_SIZE_64KB:
+ banks_num = 1;
+ sectors_num = 16;
+ pages_per_sector = 32;
+ page_size = 128;
+ base_address = 0x00100000;
+ if (arch == 0x70)
+ {
+ num_nvmbits = 2;
+ target_name = "AT91SAM7S64";
+ }
+ break;
+
+ case FLASH_SIZE_128KB:
+ banks_num = 1;
+ sectors_num = 8;
+ pages_per_sector = 64;
+ page_size = 256;
+ base_address = 0x00100000;
+ if (arch == 0x70)
+ {
+ num_nvmbits = 2;
+ target_name = "AT91SAM7S128";
+ }
+ if (arch == 0x71)
+ {
+ num_nvmbits = 3;
+ target_name = "AT91SAM7XC128";
+ }
+ if (arch == 0x72)
+ {
+ num_nvmbits = 3;
+ target_name = "AT91SAM7SE128";
+ }
+ if (arch == 0x75)
+ {
+ num_nvmbits = 3;
+ target_name = "AT91SAM7X128";
+ }
+ break;
+
+ case FLASH_SIZE_256KB:
+ banks_num = 1;
+ sectors_num = 16;
+ pages_per_sector = 64;
+ page_size = 256;
+ base_address = 0x00100000;
+ if (arch == 0x60)
+ {
+ num_nvmbits = 3;
+ target_name = "AT91SAM7A3";
+ }
+ if (arch == 0x70)
+ {
+ num_nvmbits = 2;
+ target_name = "AT91SAM7S256";
+ }
+ if (arch == 0x71)
+ {
+ num_nvmbits = 3;
+ target_name = "AT91SAM7XC256";
+ }
+ if (arch == 0x72)
+ {
+ num_nvmbits = 3;
+ target_name = "AT91SAM7SE256";
+ }
+ if (arch == 0x75)
+ {
+ num_nvmbits = 3;
+ target_name = "AT91SAM7X256";
+ }
+ break;
+
+ case FLASH_SIZE_512KB:
+ banks_num = 2;
+ sectors_num = 16;
+ pages_per_sector = 64;
+ page_size = 256;
+ base_address = 0x00100000;
+ if (arch == 0x70)
+ {
+ num_nvmbits = 2;
+ target_name = "AT91SAM7S512";
+ }
+ if (arch == 0x71)
+ {
+ num_nvmbits = 3;
+ target_name = "AT91SAM7XC512";
+ }
+ if (arch == 0x72)
+ {
+ num_nvmbits = 3;
+ target_name = "AT91SAM7SE512";
+ }
+ if (arch == 0x75)
+ {
+ num_nvmbits = 3;
+ target_name = "AT91SAM7X512";
+ }
+ break;
+
+ case FLASH_SIZE_1024KB:
+ break;
+
+ case FLASH_SIZE_2048KB:
+ break;
+ }
+
+ if (strcmp(target_name, "Unknown") == 0)
+ {
+ LOG_ERROR("Target autodetection failed! Please specify target parameters in configuration file");
+ return ERROR_FLASH_OPERATION_FAILED;
+ }
+
+ ext_freq = at91sam7_info->ext_freq;
+
+ /* calculate bank size */
+ bank_size = sectors_num * pages_per_sector * page_size;
+
+ for (bnk = 0; bnk < banks_num; bnk++)
+ {
+ if (bnk > 0)
+ {
+ /* create a new flash bank element */
+ flash_bank_t *fb = malloc(sizeof(flash_bank_t));
+ fb->target = target;
+ fb->driver = &at91sam7_flash;
+ fb->driver_priv = malloc(sizeof(at91sam7_flash_bank_t));
+ fb->next = NULL;
+
+ /* link created bank in 'flash_banks' list and redirect t_bank */
+ t_bank->next = fb;
+ t_bank = fb;
+ }
+
+ t_bank->bank_number = bnk;
+ t_bank->base = base_address + bnk * bank_size;
+ t_bank->size = bank_size;
+ t_bank->chip_width = 0;
+ t_bank->bus_width = 4;
+ t_bank->num_sectors = sectors_num;
+
+ /* allocate sectors */
+ t_bank->sectors = malloc(sectors_num * sizeof(flash_sector_t));
+ for (sec = 0; sec < sectors_num; sec++)
+ {
+ t_bank->sectors[sec].offset = sec * pages_per_sector * page_size;
+ t_bank->sectors[sec].size = pages_per_sector * page_size;
+ t_bank->sectors[sec].is_erased = -1;
+ t_bank->sectors[sec].is_protected = -1;
+ }
+
+ at91sam7_info = t_bank->driver_priv;
+
+ at91sam7_info->cidr = cidr;
+ at91sam7_info->cidr_ext = (cidr >> 31)&0x0001;
+ at91sam7_info->cidr_nvptyp = (cidr >> 28)&0x0007;
+ at91sam7_info->cidr_arch = (cidr >> 20)&0x00FF;
+ at91sam7_info->cidr_sramsiz = (cidr >> 16)&0x000F;
+ at91sam7_info->cidr_nvpsiz2 = (cidr >> 12)&0x000F;
+ at91sam7_info->cidr_nvpsiz = (cidr >> 8)&0x000F;
+ at91sam7_info->cidr_eproc = (cidr >> 5)&0x0007;
+ at91sam7_info->cidr_version = cidr&0x001F;
+
+ at91sam7_info->target_name = target_name;
+ at91sam7_info->flashmode = 0;
+ at91sam7_info->ext_freq = ext_freq;
+ at91sam7_info->num_nvmbits = num_nvmbits;
+ at91sam7_info->num_nvmbits_on = 0;
+ at91sam7_info->pagesize = page_size;
+ at91sam7_info->pages_per_sector = pages_per_sector;
+
+ /* calculate master clock frequency */
+ at91sam7_read_clock_info(t_bank);
+
+ /* no timming */
+ at91sam7_set_flash_mode(t_bank, FMR_TIMING_NONE);
+
+ /* check protect state */
+ at91sam7_protect_check(t_bank);
+ }
+
+ LOG_DEBUG("nvptyp: 0x%3.3x, arch: 0x%4.4x", at91sam7_info->cidr_nvptyp, at91sam7_info->cidr_arch );
+
+ return ERROR_OK;
}
-int at91sam7_erase_check(struct flash_bank_s *bank)
+static int at91sam7_erase_check(struct flash_bank_s *bank)
{
- at91sam7_flash_bank_t *at91sam7_info = bank->driver_priv;
-
- target_t *target = bank->target;
- u16 retval;
- u32 blank;
- u16 fast_check;
- u8 *buffer;
- u16 nSector;
- u16 nByte;
-
- if (bank->target->state != TARGET_HALTED)
- {
- LOG_ERROR("Target not halted");
- return ERROR_TARGET_NOT_HALTED;
- }
-
- /* Configure the flash controller timing */
- at91sam7_read_clock_info(bank);
- at91sam7_set_flash_mode(bank, FMR_TIMING_FLASH);
-
- fast_check = 1;
- for (nSector=0; nSector<bank->num_sectors; nSector++)
- {
- retval = target_blank_check_memory(target, bank->base+bank->sectors[nSector].offset,
- bank->sectors[nSector].size, &blank);
- if (retval != ERROR_OK)
- {
- fast_check = 0;
- break;
- }
- if (blank == 0xFF)
- bank->sectors[nSector].is_erased = 1;
- else
- bank->sectors[nSector].is_erased = 0;
- }
-
- if (fast_check)
- {
- return ERROR_OK;
- }
-
- LOG_USER("Running slow fallback erase check - add working memory");
-
- buffer = malloc(bank->sectors[0].size);
- for (nSector=0; nSector<bank->num_sectors; nSector++)
- {
-
- bank->sectors[nSector].is_erased = 1;
- retval = target->type->read_memory(target, bank->base+bank->sectors[nSector].offset, 4,
- bank->sectors[nSector].size/4, buffer);
- if (retval != ERROR_OK)
- return retval;
-
- for (nByte=0; nByte<bank->sectors[nSector].size; nByte++)
- {
- if (buffer[nByte] != 0xFF)
- {
- bank->sectors[nSector].is_erased = 0;
- break;
- }
- }
- }
- free(buffer);
-
- return ERROR_OK;
+ target_t *target = bank->target;
+ uint16_t retval;
+ uint32_t blank;
+ uint16_t fast_check;
+ uint8_t *buffer;
+ uint16_t nSector;
+ uint16_t nByte;
+
+ if (bank->target->state != TARGET_HALTED)
+ {
+ LOG_ERROR("Target not halted");
+ return ERROR_TARGET_NOT_HALTED;
+ }
+
+ /* Configure the flash controller timing */
+ at91sam7_read_clock_info(bank);
+ at91sam7_set_flash_mode(bank, FMR_TIMING_FLASH);
+
+ fast_check = 1;
+ for (nSector = 0; nSector < bank->num_sectors; nSector++)
+ {
+ retval = target_blank_check_memory(target, bank->base + bank->sectors[nSector].offset,
+ bank->sectors[nSector].size, &blank);
+ if (retval != ERROR_OK)
+ {
+ fast_check = 0;
+ break;
+ }
+ if (blank == 0xFF)
+ bank->sectors[nSector].is_erased = 1;
+ else
+ bank->sectors[nSector].is_erased = 0;
+ }
+
+ if (fast_check)
+ {
+ return ERROR_OK;
+ }
+
+ LOG_USER("Running slow fallback erase check - add working memory");
+
+ buffer = malloc(bank->sectors[0].size);
+ for (nSector = 0; nSector < bank->num_sectors; nSector++)
+ {
+ bank->sectors[nSector].is_erased = 1;
+ retval = target_read_memory(target, bank->base + bank->sectors[nSector].offset, 4,
+ bank->sectors[nSector].size/4, buffer);
+ if (retval != ERROR_OK)
+ return retval;
+
+ for (nByte = 0; nByte < bank->sectors[nSector].size; nByte++)
+ {
+ if (buffer[nByte] != 0xFF)
+ {
+ bank->sectors[nSector].is_erased = 0;
+ break;
+ }
+ }
+ }
+ free(buffer);
+
+ return ERROR_OK;
}
-int at91sam7_protect_check(struct flash_bank_s *bank)
+static int at91sam7_protect_check(struct flash_bank_s *bank)
{
- u8 lock_pos, gpnvm_pos;
- u32 status;
-
- at91sam7_flash_bank_t *at91sam7_info = bank->driver_priv;
-
- if (at91sam7_info->cidr == 0)
- {
- return ERROR_FLASH_BANK_NOT_PROBED;
- }
- if (bank->target->state != TARGET_HALTED)
- {
- LOG_ERROR("Target not halted");
- return ERROR_TARGET_NOT_HALTED;
- }
-
- status = at91sam7_get_flash_status(bank->target, bank->bank_number);
- at91sam7_info->lockbits = (status>>16);
-
- at91sam7_info->num_lockbits_on = 0;
- for (lock_pos=0; lock_pos<bank->num_sectors; lock_pos++)
- {
- if ( ((status>>(16+lock_pos))&(0x0001)) == 1)
- {
- at91sam7_info->num_lockbits_on++;
- bank->sectors[lock_pos].is_protected = 1;
- }
- else
- bank->sectors[lock_pos].is_protected = 0;
- }
-
- /* GPNVM and SECURITY bits apply only for MC_FSR of EFC0 */
- status = at91sam7_get_flash_status(bank->target, 0);
-
- at91sam7_info->securitybit = (status>>4)&0x01;
- at91sam7_info->nvmbits = (status>>8)&0xFF;
-
- at91sam7_info->num_nvmbits_on = 0;
- for (gpnvm_pos=0; gpnvm_pos<at91sam7_info->num_nvmbits; gpnvm_pos++)
- {
- if ( ((status>>(8+gpnvm_pos))&(0x01)) == 1)
- {
- at91sam7_info->num_nvmbits_on++;
- }
- }
-
- return ERROR_OK;
+ uint8_t lock_pos, gpnvm_pos;
+ uint32_t status;
+
+ at91sam7_flash_bank_t *at91sam7_info = bank->driver_priv;
+
+ if (at91sam7_info->cidr == 0)
+ {
+ return ERROR_FLASH_BANK_NOT_PROBED;
+ }
+ if (bank->target->state != TARGET_HALTED)
+ {
+ LOG_ERROR("Target not halted");
+ return ERROR_TARGET_NOT_HALTED;
+ }
+
+ status = at91sam7_get_flash_status(bank->target, bank->bank_number);
+ at91sam7_info->lockbits = (status >> 16);
+
+ at91sam7_info->num_lockbits_on = 0;
+ for (lock_pos = 0; lock_pos < bank->num_sectors; lock_pos++)
+ {
+ if (((status >> (16 + lock_pos))&(0x0001)) == 1)
+ {
+ at91sam7_info->num_lockbits_on++;
+ bank->sectors[lock_pos].is_protected = 1;
+ }
+ else
+ bank->sectors[lock_pos].is_protected = 0;
+ }
+
+ /* GPNVM and SECURITY bits apply only for MC_FSR of EFC0 */
+ status = at91sam7_get_flash_status(bank->target, 0);
+
+ at91sam7_info->securitybit = (status >> 4)&0x01;
+ at91sam7_info->nvmbits = (status >> 8)&0xFF;
+
+ at91sam7_info->num_nvmbits_on = 0;
+ for (gpnvm_pos = 0; gpnvm_pos < at91sam7_info->num_nvmbits; gpnvm_pos++)
+ {
+ if (((status >> (8 + gpnvm_pos))&(0x01)) == 1)
+ {
+ at91sam7_info->num_nvmbits_on++;
+ }
+ }
+
+ return ERROR_OK;
}
/***************************************************************************************************************************************************************************************
# flash bank at91sam7 0x00100000 0 0 4 0 0 AT91SAM7XC256 1 16 64 256 3 0 ==== NOT RECOMENDED !!! ====
# flash bank at91sam7 0 0 0 0 0 (old style, full auto-detection) ==== NOT RECOMENDED !!! ====
****************************************************************************************************************************************************************************************/
-int at91sam7_flash_bank_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc, struct flash_bank_s *bank)
+static int at91sam7_flash_bank_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc, struct flash_bank_s *bank)
{
- flash_bank_t *t_bank = bank;
- at91sam7_flash_bank_t *at91sam7_info;
- target_t *target = t_bank->target;
-
- u32 base_address;
- u32 bank_size;
- u32 ext_freq;
-
- int chip_width;
- int bus_width;
- int banks_num;
- int num_sectors;
-
- u16 pages_per_sector;
- u16 page_size;
- u16 num_nvmbits;
-
- char *target_name;
-
- int bnk, sec;
-
- at91sam7_info = malloc(sizeof(at91sam7_flash_bank_t));
- t_bank->driver_priv = at91sam7_info;
-
- /* part wasn't probed for info yet */
- at91sam7_info->cidr = 0;
- at91sam7_info->flashmode = 0;
- at91sam7_info->ext_freq = 0;
- at91sam7_info->flash_autodetection = 0;
-
- if (argc == 14)
- {
- ext_freq = atol(args[13]) * 1000;
- at91sam7_info->ext_freq = ext_freq;
- }
-
- if ((argc != 14) ||
- (atoi(args[4]) == 0) || /* bus width */
- (atoi(args[8]) == 0) || /* banks number */
- (atoi(args[9]) == 0) || /* sectors per bank */
- (atoi(args[10]) == 0) || /* pages per sector */
- (atoi(args[11]) == 0) || /* page size */
- (atoi(args[12]) == 0)) /* nvmbits number */
- {
- at91sam7_info->flash_autodetection = 1;
- return ERROR_OK;
- }
-
- base_address = strtoul(args[1], NULL, 0);
- chip_width = atoi(args[3]);
- bus_width = atoi(args[4]);
- banks_num = atoi(args[8]);
- num_sectors = atoi(args[9]);
- pages_per_sector = atoi(args[10]);
- page_size = atoi(args[11]);
- num_nvmbits = atoi(args[12]);
-
- target_name = calloc(strlen(args[7])+1, sizeof(char));
- strcpy(target_name, args[7]);
-
- /* calculate bank size */
- bank_size = num_sectors * pages_per_sector * page_size;
-
- for (bnk=0; bnk<banks_num; bnk++)
- {
- if (bnk > 0)
- {
- /* create a new bank element */
- flash_bank_t *fb = malloc(sizeof(flash_bank_t));
- fb->target = target;
- fb->driver = &at91sam7_flash;
- fb->driver_priv = malloc(sizeof(at91sam7_flash_bank_t));
- fb->next = NULL;
-
- /* link created bank in 'flash_banks' list and redirect t_bank */
- t_bank->next = fb;
- t_bank = fb;
- }
-
- t_bank->bank_number = bnk;
- t_bank->base = base_address + bnk * bank_size;
- t_bank->size = bank_size;
- t_bank->chip_width = chip_width;
- t_bank->bus_width = bus_width;
- t_bank->num_sectors = num_sectors;
-
- /* allocate sectors */
- t_bank->sectors = malloc(num_sectors * sizeof(flash_sector_t));
- for (sec=0; sec<num_sectors; sec++)
- {
- t_bank->sectors[sec].offset = sec * pages_per_sector * page_size;
- t_bank->sectors[sec].size = pages_per_sector * page_size;
- t_bank->sectors[sec].is_erased = -1;
- t_bank->sectors[sec].is_protected = -1;
- }
-
- at91sam7_info = t_bank->driver_priv;
-
- at91sam7_info->target_name = target_name;
- at91sam7_info->flashmode = 0;
- at91sam7_info->ext_freq = ext_freq;
- at91sam7_info->num_nvmbits = num_nvmbits;
- at91sam7_info->num_nvmbits_on = 0;
- at91sam7_info->pagesize = page_size;
- at91sam7_info->pages_per_sector = pages_per_sector;
- }
-
- return ERROR_OK;
+ flash_bank_t *t_bank = bank;
+ at91sam7_flash_bank_t *at91sam7_info;
+ target_t *target = t_bank->target;
+
+ uint32_t base_address;
+ uint32_t bank_size;
+ uint32_t ext_freq;
+
+ int chip_width;
+ int bus_width;
+ int banks_num;
+ int num_sectors;
+
+ uint16_t pages_per_sector;
+ uint16_t page_size;
+ uint16_t num_nvmbits;
+
+ char *target_name;
+
+ int bnk, sec;
+
+ at91sam7_info = malloc(sizeof(at91sam7_flash_bank_t));
+ t_bank->driver_priv = at91sam7_info;
+
+ /* part wasn't probed for info yet */
+ at91sam7_info->cidr = 0;
+ at91sam7_info->flashmode = 0;
+ at91sam7_info->ext_freq = 0;
+ at91sam7_info->flash_autodetection = 0;
+
+ if (argc == 14)
+ {
+ ext_freq = atol(args[13]) * 1000;
+ at91sam7_info->ext_freq = ext_freq;
+ }
+
+ if ((argc != 14) ||
+ (atoi(args[4]) == 0) || /* bus width */
+ (atoi(args[8]) == 0) || /* banks number */
+ (atoi(args[9]) == 0) || /* sectors per bank */
+ (atoi(args[10]) == 0) || /* pages per sector */
+ (atoi(args[11]) == 0) || /* page size */
+ (atoi(args[12]) == 0)) /* nvmbits number */
+ {
+ at91sam7_info->flash_autodetection = 1;
+ return ERROR_OK;
+ }
+
+ base_address = strtoul(args[1], NULL, 0);
+ chip_width = atoi(args[3]);
+ bus_width = atoi(args[4]);
+ banks_num = atoi(args[8]);
+ num_sectors = atoi(args[9]);
+ pages_per_sector = atoi(args[10]);
+ page_size = atoi(args[11]);
+ num_nvmbits = atoi(args[12]);
+
+ target_name = calloc(strlen(args[7]) + 1, sizeof(char));
+ strcpy(target_name, args[7]);
+
+ /* calculate bank size */
+ bank_size = num_sectors * pages_per_sector * page_size;
+
+ for (bnk = 0; bnk < banks_num; bnk++)
+ {
+ if (bnk > 0)
+ {
+ /* create a new bank element */
+ flash_bank_t *fb = malloc(sizeof(flash_bank_t));
+ fb->target = target;
+ fb->driver = &at91sam7_flash;
+ fb->driver_priv = malloc(sizeof(at91sam7_flash_bank_t));
+ fb->next = NULL;
+
+ /* link created bank in 'flash_banks' list and redirect t_bank */
+ t_bank->next = fb;
+ t_bank = fb;
+ }
+
+ t_bank->bank_number = bnk;
+ t_bank->base = base_address + bnk * bank_size;
+ t_bank->size = bank_size;
+ t_bank->chip_width = chip_width;
+ t_bank->bus_width = bus_width;
+ t_bank->num_sectors = num_sectors;
+
+ /* allocate sectors */
+ t_bank->sectors = malloc(num_sectors * sizeof(flash_sector_t));
+ for (sec = 0; sec < num_sectors; sec++)
+ {
+ t_bank->sectors[sec].offset = sec * pages_per_sector * page_size;
+ t_bank->sectors[sec].size = pages_per_sector * page_size;
+ t_bank->sectors[sec].is_erased = -1;
+ t_bank->sectors[sec].is_protected = -1;
+ }
+
+ at91sam7_info = t_bank->driver_priv;
+
+ at91sam7_info->target_name = target_name;
+ at91sam7_info->flashmode = 0;
+ at91sam7_info->ext_freq = ext_freq;
+ at91sam7_info->num_nvmbits = num_nvmbits;
+ at91sam7_info->num_nvmbits_on = 0;
+ at91sam7_info->pagesize = page_size;
+ at91sam7_info->pages_per_sector = pages_per_sector;
+ }
+
+ return ERROR_OK;
}
-int at91sam7_erase(struct flash_bank_s *bank, int first, int last)
+static int at91sam7_erase(struct flash_bank_s *bank, int first, int last)
{
- at91sam7_flash_bank_t *at91sam7_info = bank->driver_priv;
- int sec;
- u32 nbytes, pos;
- u8 *buffer;
- u8 erase_all;
-
- if (at91sam7_info->cidr == 0)
- {
- return ERROR_FLASH_BANK_NOT_PROBED;
- }
-
- if (bank->target->state != TARGET_HALTED)
- {
- LOG_ERROR("Target not halted");
- return ERROR_TARGET_NOT_HALTED;
- }
-
- if ((first < 0) || (last < first) || (last >= bank->num_sectors))
- {
- return ERROR_FLASH_SECTOR_INVALID;
- }
-
- erase_all = 0;
- if ((first == 0) && (last == (bank->num_sectors-1)))
- {
- erase_all = 1;
- }
-
- /* Configure the flash controller timing */
- at91sam7_read_clock_info(bank);
- at91sam7_set_flash_mode(bank, FMR_TIMING_FLASH);
-
- if(erase_all)
- {
- if (at91sam7_flash_command(bank, EA, 0) != ERROR_OK)
- {
- return ERROR_FLASH_OPERATION_FAILED;
- }
- }
- else
- {
- /* allocate and clean buffer */
- nbytes = (last - first + 1) * bank->sectors[first].size;
- buffer = malloc(nbytes * sizeof(u8));
- for (pos=0; pos<nbytes; pos++)
- {
- buffer[pos] = 0xFF;
- }
-
- if ( at91sam7_write(bank, buffer, bank->sectors[first].offset, nbytes) != ERROR_OK)
- {
- return ERROR_FLASH_OPERATION_FAILED;
- }
-
- free(buffer);
- }
-
- /* mark erased sectors */
- for (sec=first; sec<=last; sec++)
- {
- bank->sectors[sec].is_erased = 1;
- }
-
- return ERROR_OK;
+ at91sam7_flash_bank_t *at91sam7_info = bank->driver_priv;
+ int sec;
+ uint32_t nbytes, pos;
+ uint8_t *buffer;
+ uint8_t erase_all;
+
+ if (at91sam7_info->cidr == 0)
+ {
+ return ERROR_FLASH_BANK_NOT_PROBED;
+ }
+
+ if (bank->target->state != TARGET_HALTED)
+ {
+ LOG_ERROR("Target not halted");
+ return ERROR_TARGET_NOT_HALTED;
+ }
+
+ if ((first < 0) || (last < first) || (last >= bank->num_sectors))
+ {
+ return ERROR_FLASH_SECTOR_INVALID;
+ }
+
+ erase_all = 0;
+ if ((first == 0) && (last == (bank->num_sectors-1)))
+ {
+ erase_all = 1;
+ }
+
+ /* Configure the flash controller timing */
+ at91sam7_read_clock_info(bank);
+ at91sam7_set_flash_mode(bank, FMR_TIMING_FLASH);
+
+ if (erase_all)
+ {
+ if (at91sam7_flash_command(bank, EA, 0) != ERROR_OK)
+ {
+ return ERROR_FLASH_OPERATION_FAILED;
+ }
+ }
+ else
+ {
+ /* allocate and clean buffer */
+ nbytes = (last - first + 1) * bank->sectors[first].size;
+ buffer = malloc(nbytes * sizeof(uint8_t));
+ for (pos = 0; pos < nbytes; pos++)
+ {
+ buffer[pos] = 0xFF;
+ }
+
+ if (at91sam7_write(bank, buffer, bank->sectors[first].offset, nbytes) != ERROR_OK)
+ {
+ return ERROR_FLASH_OPERATION_FAILED;
+ }
+
+ free(buffer);
+ }
+
+ /* mark erased sectors */
+ for (sec = first; sec <= last; sec++)
+ {
+ bank->sectors[sec].is_erased = 1;
+ }
+
+ return ERROR_OK;
}
-int at91sam7_protect(struct flash_bank_s *bank, int set, int first, int last)
+static int at91sam7_protect(struct flash_bank_s *bank, int set, int first, int last)
{
- u32 cmd;
- u32 sector, pagen;
-
- at91sam7_flash_bank_t *at91sam7_info = bank->driver_priv;
-
- if (at91sam7_info->cidr == 0)
- {
- return ERROR_FLASH_BANK_NOT_PROBED;
- }
-
- if (bank->target->state != TARGET_HALTED)
- {
- LOG_ERROR("Target not halted");
- return ERROR_TARGET_NOT_HALTED;
- }
-
- if ((first < 0) || (last < first) || (last >= bank->num_sectors))
- {
- return ERROR_FLASH_SECTOR_INVALID;
- }
-
- /* Configure the flash controller timing */
- at91sam7_read_clock_info(bank);
- at91sam7_set_flash_mode(bank, FMR_TIMING_NVBITS);
-
- for (sector=first; sector<=last; sector++)
- {
- if (set)
- cmd = SLB;
- else
- cmd = CLB;
-
- /* if we lock a page from one sector then entire sector will be locked, also,
- if we unlock a page from a locked sector, entire sector will be unlocked */
- pagen = sector * at91sam7_info->pages_per_sector;
-
- if (at91sam7_flash_command(bank, cmd, pagen) != ERROR_OK)
- {
- return ERROR_FLASH_OPERATION_FAILED;
- }
- }
-
- at91sam7_protect_check(bank);
-
- return ERROR_OK;
+ uint32_t cmd;
+ int sector;
+ uint32_t pagen;
+
+ at91sam7_flash_bank_t *at91sam7_info = bank->driver_priv;
+
+ if (at91sam7_info->cidr == 0)
+ {
+ return ERROR_FLASH_BANK_NOT_PROBED;
+ }
+
+ if (bank->target->state != TARGET_HALTED)
+ {
+ LOG_ERROR("Target not halted");
+ return ERROR_TARGET_NOT_HALTED;
+ }
+
+ if ((first < 0) || (last < first) || (last >= bank->num_sectors))
+ {
+ return ERROR_FLASH_SECTOR_INVALID;
+ }
+
+ /* Configure the flash controller timing */
+ at91sam7_read_clock_info(bank);
+ at91sam7_set_flash_mode(bank, FMR_TIMING_NVBITS);
+
+ for (sector = first; sector <= last; sector++)
+ {
+ if (set)
+ cmd = SLB;
+ else
+ cmd = CLB;
+
+ /* if we lock a page from one sector then entire sector will be locked, also,
+ * if we unlock a page from a locked sector, entire sector will be unlocked */
+ pagen = sector * at91sam7_info->pages_per_sector;
+
+ if (at91sam7_flash_command(bank, cmd, pagen) != ERROR_OK)
+ {
+ return ERROR_FLASH_OPERATION_FAILED;
+ }
+ }
+
+ at91sam7_protect_check(bank);
+
+ return ERROR_OK;
}
-int at91sam7_write(struct flash_bank_s *bank, u8 *buffer, u32 offset, u32 count)
+static int at91sam7_write(struct flash_bank_s *bank, uint8_t *buffer, uint32_t offset, uint32_t count)
{
- at91sam7_flash_bank_t *at91sam7_info = bank->driver_priv;
- target_t *target = bank->target;
- u32 dst_min_alignment, wcount, bytes_remaining = count;
- u32 first_page, last_page, pagen, buffer_pos;
-
- if (at91sam7_info->cidr == 0)
- {
- return ERROR_FLASH_BANK_NOT_PROBED;
- }
-
- if (bank->target->state != TARGET_HALTED)
- {
- LOG_ERROR("Target not halted");
- return ERROR_TARGET_NOT_HALTED;
- }
-
- if (offset + count > bank->size)
- return ERROR_FLASH_DST_OUT_OF_BANK;
-
- dst_min_alignment = at91sam7_info->pagesize;
-
- if (offset % dst_min_alignment)
- {
- LOG_WARNING("offset 0x%x breaks required alignment 0x%x", offset, dst_min_alignment);
- return ERROR_FLASH_DST_BREAKS_ALIGNMENT;
- }
-
- if (at91sam7_info->cidr_arch == 0)
- return ERROR_FLASH_BANK_NOT_PROBED;
-
- first_page = offset/dst_min_alignment;
- last_page = CEIL(offset + count, dst_min_alignment);
-
- LOG_DEBUG("first_page: %i, last_page: %i, count %i", first_page, last_page, count);
-
- /* Configure the flash controller timing */
- at91sam7_read_clock_info(bank);
- at91sam7_set_flash_mode(bank, FMR_TIMING_FLASH);
-
- for (pagen=first_page; pagen<last_page; pagen++)
- {
- if (bytes_remaining<dst_min_alignment)
- count = bytes_remaining;
- else
- count = dst_min_alignment;
- bytes_remaining -= count;
-
- /* Write one block to the PageWriteBuffer */
- buffer_pos = (pagen-first_page)*dst_min_alignment;
- wcount = CEIL(count,4);
- target->type->write_memory(target, bank->base+pagen*dst_min_alignment, 4, wcount, buffer+buffer_pos);
-
- /* Send Write Page command to Flash Controller */
- if (at91sam7_flash_command(bank, WP, pagen) != ERROR_OK)
- {
- return ERROR_FLASH_OPERATION_FAILED;
- }
- LOG_DEBUG("Write flash bank:%i page number:%i", bank->bank_number, pagen);
- }
-
- return ERROR_OK;
+ int retval;
+ at91sam7_flash_bank_t *at91sam7_info = bank->driver_priv;
+ target_t *target = bank->target;
+ uint32_t dst_min_alignment, wcount, bytes_remaining = count;
+ uint32_t first_page, last_page, pagen, buffer_pos;
+
+ if (at91sam7_info->cidr == 0)
+ {
+ return ERROR_FLASH_BANK_NOT_PROBED;
+ }
+
+ if (bank->target->state != TARGET_HALTED)
+ {
+ LOG_ERROR("Target not halted");
+ return ERROR_TARGET_NOT_HALTED;
+ }
+
+ if (offset + count > bank->size)
+ return ERROR_FLASH_DST_OUT_OF_BANK;
+
+ dst_min_alignment = at91sam7_info->pagesize;
+
+ if (offset % dst_min_alignment)
+ {
+ LOG_WARNING("offset 0x%" PRIx32 " breaks required alignment 0x%" PRIx32 "", offset, dst_min_alignment);
+ return ERROR_FLASH_DST_BREAKS_ALIGNMENT;
+ }
+
+ if (at91sam7_info->cidr_arch == 0)
+ return ERROR_FLASH_BANK_NOT_PROBED;
+
+ first_page = offset/dst_min_alignment;
+ last_page = CEIL(offset + count, dst_min_alignment);
+
+ LOG_DEBUG("first_page: %i, last_page: %i, count %i", (int)first_page, (int)last_page, (int)count);
+
+ /* Configure the flash controller timing */
+ at91sam7_read_clock_info(bank);
+ at91sam7_set_flash_mode(bank, FMR_TIMING_FLASH);
+
+ for (pagen = first_page; pagen < last_page; pagen++)
+ {
+ if (bytes_remaining < dst_min_alignment)
+ count = bytes_remaining;
+ else
+ count = dst_min_alignment;
+ bytes_remaining -= count;
+
+ /* Write one block to the PageWriteBuffer */
+ buffer_pos = (pagen-first_page)*dst_min_alignment;
+ wcount = CEIL(count,4);
+ if ((retval = target_write_memory(target, bank->base + pagen*dst_min_alignment, 4, wcount, buffer + buffer_pos)) != ERROR_OK)
+ {
+ return retval;
+ }
+
+ /* Send Write Page command to Flash Controller */
+ if (at91sam7_flash_command(bank, WP, pagen) != ERROR_OK)
+ {
+ return ERROR_FLASH_OPERATION_FAILED;
+ }
+ LOG_DEBUG("Write flash bank:%i page number:%" PRIi32 "", bank->bank_number, pagen);
+ }
+
+ return ERROR_OK;
}
-int at91sam7_probe(struct flash_bank_s *bank)
+static int at91sam7_probe(struct flash_bank_s *bank)
{
- /* we can't probe on an at91sam7
- * if this is an at91sam7, it has the configured flash
- */
- at91sam7_flash_bank_t *at91sam7_info = bank->driver_priv;
- int retval;
-
- if (bank->target->state != TARGET_HALTED)
- {
- LOG_ERROR("Target not halted");
- return ERROR_TARGET_NOT_HALTED;
- }
-
- retval = at91sam7_read_part_info(bank);
- if (retval != ERROR_OK)
- return retval;
-
- return ERROR_OK;
+ /* we can't probe on an at91sam7
+ * if this is an at91sam7, it has the configured flash */
+ int retval;
+
+ if (bank->target->state != TARGET_HALTED)
+ {
+ LOG_ERROR("Target not halted");
+ return ERROR_TARGET_NOT_HALTED;
+ }
+
+ retval = at91sam7_read_part_info(bank);
+ if (retval != ERROR_OK)
+ return retval;
+
+ return ERROR_OK;
}
-int at91sam7_info(struct flash_bank_s *bank, char *buf, int buf_size)
+static int at91sam7_info(struct flash_bank_s *bank, char *buf, int buf_size)
{
- int printed;
- at91sam7_flash_bank_t *at91sam7_info = bank->driver_priv;
+ int printed;
+ at91sam7_flash_bank_t *at91sam7_info = bank->driver_priv;
- if (at91sam7_info->cidr == 0)
- {
- return ERROR_FLASH_BANK_NOT_PROBED;
- }
+ if (at91sam7_info->cidr == 0)
+ {
+ return ERROR_FLASH_BANK_NOT_PROBED;
+ }
- printed = snprintf(buf, buf_size,
- "\n at91sam7 driver information: Chip is %s\n",
- at91sam7_info->target_name);
+ printed = snprintf(buf, buf_size,
+ "\n at91sam7 driver information: Chip is %s\n",
+ at91sam7_info->target_name);
- buf += printed;
- buf_size -= printed;
+ buf += printed;
+ buf_size -= printed;
- printed = snprintf(buf, buf_size,
- " Cidr: 0x%8.8x | Arch: 0x%4.4x | Eproc: %s | Version: 0x%3.3x | Flashsize: 0x%8.8x\n",
- at91sam7_info->cidr, at91sam7_info->cidr_arch, EPROC[at91sam7_info->cidr_eproc],
- at91sam7_info->cidr_version, bank->size);
+ printed = snprintf(buf,
+ buf_size,
+ " Cidr: 0x%8.8" PRIx32 " | Arch: 0x%4.4x | Eproc: %s | Version: 0x%3.3x | Flashsize: 0x%8.8" PRIx32 "\n",
+ at91sam7_info->cidr,
+ at91sam7_info->cidr_arch,
+ EPROC[at91sam7_info->cidr_eproc],
+ at91sam7_info->cidr_version,
+ bank->size);
- buf += printed;
- buf_size -= printed;
+ buf += printed;
+ buf_size -= printed;
- printed = snprintf(buf, buf_size,
- " Master clock (estimated): %li KHz | External clock: %li KHz\n",
- at91sam7_info->mck_freq / 1000, at91sam7_info->ext_freq / 1000);
+ printed = snprintf(buf, buf_size,
+ " Master clock (estimated): %u KHz | External clock: %u KHz\n",
+ (unsigned)(at91sam7_info->mck_freq / 1000), (unsigned)(at91sam7_info->ext_freq / 1000));
- buf += printed;
- buf_size -= printed;
+ buf += printed;
+ buf_size -= printed;
- printed = snprintf(buf, buf_size,
- " Pagesize: %i bytes | Lockbits(%i): %i 0x%4.4x | Pages in lock region: %i \n",
- at91sam7_info->pagesize, bank->num_sectors, at91sam7_info->num_lockbits_on,
- at91sam7_info->lockbits, at91sam7_info->pages_per_sector*at91sam7_info->num_lockbits_on);
+ printed = snprintf(buf, buf_size,
+ " Pagesize: %i bytes | Lockbits(%i): %i 0x%4.4x | Pages in lock region: %i \n",
+ at91sam7_info->pagesize, bank->num_sectors, at91sam7_info->num_lockbits_on,
+ at91sam7_info->lockbits, at91sam7_info->pages_per_sector*at91sam7_info->num_lockbits_on);
- buf += printed;
- buf_size -= printed;
+ buf += printed;
+ buf_size -= printed;
- printed = snprintf(buf, buf_size,
- " Securitybit: %i | Nvmbits(%i): %i 0x%1.1x\n",
- at91sam7_info->securitybit, at91sam7_info->num_nvmbits,
- at91sam7_info->num_nvmbits_on, at91sam7_info->nvmbits);
+ printed = snprintf(buf, buf_size,
+ " Securitybit: %i | Nvmbits(%i): %i 0x%1.1x\n",
+ at91sam7_info->securitybit, at91sam7_info->num_nvmbits,
+ at91sam7_info->num_nvmbits_on, at91sam7_info->nvmbits);
- buf += printed;
- buf_size -= printed;
+ buf += printed;
+ buf_size -= printed;
- return ERROR_OK;
+ return ERROR_OK;
}
/*
* The maximum number of write/erase cycles for Non volatile Memory bits is 100. this includes
* Lock Bits (LOCKx), General Purpose NVM bits (GPNVMx) and the Security Bit.
*/
-int at91sam7_handle_gpnvm_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
+static int at91sam7_handle_gpnvm_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
{
- flash_bank_t *bank;
- int bit;
- u8 flashcmd;
- u32 status;
- at91sam7_flash_bank_t *at91sam7_info;
- int retval;
-
- if (argc != 2)
- {
- command_print(cmd_ctx, "at91sam7 gpnvm <bit> <set|clear>");
- return ERROR_OK;
- }
-
- bank = get_flash_bank_by_num_noprobe(0);
- if (bank == NULL)
- {
- return ERROR_FLASH_BANK_INVALID;
- }
- if (bank->driver != &at91sam7_flash)
- {
- command_print(cmd_ctx, "not an at91sam7 flash bank '%s'", args[0]);
- return ERROR_FLASH_BANK_INVALID;
- }
- if (bank->target->state != TARGET_HALTED)
- {
- LOG_ERROR("target has to be halted to perform flash operation");
- return ERROR_TARGET_NOT_HALTED;
- }
-
- if (strcmp(args[1], "set") == 0)
- {
- flashcmd = SGPB;
- }
- else if (strcmp(args[1], "clear") == 0)
- {
- flashcmd = CGPB;
- }
- else
- {
- return ERROR_COMMAND_SYNTAX_ERROR;
- }
-
- at91sam7_info = bank->driver_priv;
- if (at91sam7_info->cidr == 0)
- {
- retval = at91sam7_read_part_info(bank);
- if (retval != ERROR_OK)
- {
- return retval;
- }
- }
-
- bit = atoi(args[0]);
- if ((bit < 0) || (bit >= at91sam7_info->num_nvmbits))
- {
- command_print(cmd_ctx, "gpnvm bit '#%s' is out of bounds for target %s", args[0], at91sam7_info->target_name);
- return ERROR_OK;
- }
-
- /* Configure the flash controller timing */
- at91sam7_read_clock_info(bank);
- at91sam7_set_flash_mode(bank, FMR_TIMING_NVBITS);
-
- if (at91sam7_flash_command(bank, flashcmd, bit) != ERROR_OK)
- {
- return ERROR_FLASH_OPERATION_FAILED;
- }
-
- /* GPNVM and SECURITY bits apply only for MC_FSR of EFC0 */
- status = at91sam7_get_flash_status(bank->target, 0);
- LOG_DEBUG("at91sam7_handle_gpnvm_command: cmd 0x%x, value 0x%x, status 0x%x \n", flashcmd, bit, status);
-
- /* check protect state */
- at91sam7_protect_check(bank);
-
- return ERROR_OK;
+ flash_bank_t *bank;
+ int bit;
+ uint8_t flashcmd;
+ uint32_t status;
+ at91sam7_flash_bank_t *at91sam7_info;
+ int retval;
+
+ if (argc != 2)
+ {
+ command_print(cmd_ctx, "at91sam7 gpnvm <bit> <set | clear>");
+ return ERROR_OK;
+ }
+
+ bank = get_flash_bank_by_num_noprobe(0);
+ if (bank == NULL)
+ {
+ return ERROR_FLASH_BANK_INVALID;
+ }
+ if (bank->driver != &at91sam7_flash)
+ {
+ command_print(cmd_ctx, "not an at91sam7 flash bank '%s'", args[0]);
+ return ERROR_FLASH_BANK_INVALID;
+ }
+ if (bank->target->state != TARGET_HALTED)
+ {
+ LOG_ERROR("target has to be halted to perform flash operation");
+ return ERROR_TARGET_NOT_HALTED;
+ }
+
+ if (strcmp(args[1], "set") == 0)
+ {
+ flashcmd = SGPB;
+ }
+ else if (strcmp(args[1], "clear") == 0)
+ {
+ flashcmd = CGPB;
+ }
+ else
+ {
+ return ERROR_COMMAND_SYNTAX_ERROR;
+ }
+
+ at91sam7_info = bank->driver_priv;
+ if (at91sam7_info->cidr == 0)
+ {
+ retval = at91sam7_read_part_info(bank);
+ if (retval != ERROR_OK)
+ {
+ return retval;
+ }
+ }
+
+ bit = atoi(args[0]);
+ if ((bit < 0) || (bit >= at91sam7_info->num_nvmbits))
+ {
+ command_print(cmd_ctx, "gpnvm bit '#%s' is out of bounds for target %s", args[0], at91sam7_info->target_name);
+ return ERROR_OK;
+ }
+
+ /* Configure the flash controller timing */
+ at91sam7_read_clock_info(bank);
+ at91sam7_set_flash_mode(bank, FMR_TIMING_NVBITS);
+
+ if (at91sam7_flash_command(bank, flashcmd, bit) != ERROR_OK)
+ {
+ return ERROR_FLASH_OPERATION_FAILED;
+ }
+
+ /* GPNVM and SECURITY bits apply only for MC_FSR of EFC0 */
+ status = at91sam7_get_flash_status(bank->target, 0);
+ LOG_DEBUG("at91sam7_handle_gpnvm_command: cmd 0x%x, value %d, status 0x%" PRIx32 " \n", flashcmd, bit, status);
+
+ /* check protect state */
+ at91sam7_protect_check(bank);
+
+ return ERROR_OK;
}
projects / fw / openocd / blobdiff