-/***************************************************************************
- * Copyright (C) 2006 by Magnus Lundin *
- * lundin@mlu.mine.nu *
- * *
- * This program is free software; you can redistribute it and/or modify *
- * it under the terms of the GNU General Public License as published by *
- * the Free Software Foundation; either version 2 of the License, or *
- * (at your option) any later version. *
- * *
- * This program is distributed in the hope that it will be useful, *
- * but WITHOUT ANY WARRANTY; without even the implied warranty of *
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
- * GNU General Public License for more details. *
- * *
- * You should have received a copy of the GNU General Public License *
- * along with this program; if not, write to the *
- * Free Software Foundation, Inc., *
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
- ***************************************************************************/
-
-/***************************************************************************
-There are some things to notice
-
-* AT91SAM7S64 is tested
-* All AT91SAM7Sxx and AT91SAM7Xxx should work but is not tested
-* All parameters are identified from onchip configuartion registers
-*
-* The flash controller handles erases automatically on a page (128/265 byte) basis
-* Only an EraseAll command is supported by the controller
-* Partial erases can be implemented in software by writing one 0xFFFFFFFF word to
-* some location in every page in the region to be erased
-*
-* Lock regions (sectors) are 32 or 64 pages
-*
- ***************************************************************************/
-#ifdef HAVE_CONFIG_H
-#include "config.h"
-#endif
-
-#include "replacements.h"
-
-#include "at91sam7.h"
-
-#include "flash.h"
-#include "target.h"
-#include "log.h"
-#include "binarybuffer.h"
-#include "types.h"
-
-#include <stdlib.h>
-#include <string.h>
-#include <unistd.h>
-
-int at91sam7_register_commands(struct command_context_s *cmd_ctx);
-int at91sam7_flash_bank_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc, struct flash_bank_s *bank);
-int at91sam7_erase(struct flash_bank_s *bank, int first, int last);
-int at91sam7_protect(struct flash_bank_s *bank, int set, int first, int last);
-int at91sam7_write(struct flash_bank_s *bank, u8 *buffer, u32 offset, u32 count);
-int at91sam7_probe(struct flash_bank_s *bank);
-int at91sam7_auto_probe(struct flash_bank_s *bank);
-int at91sam7_erase_check(struct flash_bank_s *bank);
-int at91sam7_protect_check(struct flash_bank_s *bank);
-int at91sam7_info(struct flash_bank_s *bank, char *buf, int buf_size);
-
-u32 at91sam7_get_flash_status(flash_bank_t *bank, u8 flashplane);
-void at91sam7_set_flash_mode(flash_bank_t *bank, u8 flashplane, int mode);
-u32 at91sam7_wait_status_busy(flash_bank_t *bank, u8 flashplane, u32 waitbits, int timeout);
-int at91sam7_flash_command(struct flash_bank_s *bank, u8 flashplane, u8 cmd, u16 pagen);
-int at91sam7_handle_gpnvm_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);
-
-flash_driver_t at91sam7_flash =
-{
- .name = "at91sam7",
- .register_commands = at91sam7_register_commands,
- .flash_bank_command = at91sam7_flash_bank_command,
- .erase = at91sam7_erase,
- .protect = at91sam7_protect,
- .write = at91sam7_write,
- .probe = at91sam7_probe,
- .auto_probe = at91sam7_auto_probe,
- .erase_check = at91sam7_erase_check,
- .protect_check = at91sam7_protect_check,
- .info = at91sam7_info
-};
-
-u32 MC_FMR[4] = { 0xFFFFFF60, 0xFFFFFF70, 0xFFFFFF80, 0xFFFFFF90 };
-u32 MC_FCR[4] = { 0xFFFFFF64, 0xFFFFFF74, 0xFFFFFF84, 0xFFFFFF94 };
-u32 MC_FSR[4] = { 0xFFFFFF68, 0xFFFFFF78, 0xFFFFFF88, 0xFFFFFF98 };
-
-char * EPROC[8]= {"Unknown","ARM946-E","ARM7TDMI","Unknown","ARM920T","ARM926EJ-S","Unknown","Unknown"};
-long NVPSIZ[16] = {
- 0,
- 0x2000, /* 8K */
- 0x4000, /* 16K */
- 0x8000, /* 32K */
- -1,
- 0x10000, /* 64K */
- -1,
- 0x20000, /* 128K */
- -1,
- 0x40000, /* 256K */
- 0x80000, /* 512K */
- -1,
- 0x100000, /* 1024K */
- -1,
- 0x200000, /* 2048K */
- -1
-};
-
-long SRAMSIZ[16] = {
- -1,
- 0x0400, /* 1K */
- 0x0800, /* 2K */
- -1,
- 0x1c000, /* 112K */
- 0x1000, /* 4K */
- 0x14000, /* 80K */
- 0x28000, /* 160K */
- 0x2000, /* 8K */
- 0x4000, /* 16K */
- 0x8000, /* 32K */
- 0x10000, /* 64K */
- 0x20000, /* 128K */
- 0x40000, /* 256K */
- 0x18000, /* 96K */
- 0x80000, /* 512K */
-};
-
-int at91sam7_register_commands(struct command_context_s *cmd_ctx)
-{
- command_t *at91sam7_cmd = register_command(cmd_ctx, NULL, "at91sam7", NULL, COMMAND_ANY, NULL);
- register_command(cmd_ctx, at91sam7_cmd, "gpnvm", at91sam7_handle_gpnvm_command, COMMAND_EXEC,
- "at91sam7 gpnvm <num> <bit> set|clear, set or clear at91sam7 gpnvm bit");
-
- return ERROR_OK;
-}
-
-u32 at91sam7_get_flash_status(flash_bank_t *bank, u8 flashplane)
-{
- target_t *target = bank->target;
- u32 fsr;
-
- target_read_u32(target, MC_FSR[flashplane], &fsr);
-
- return fsr;
-}
-
-/** Read clock configuration and set at91sam7_info->usec_clocks*/
-void at91sam7_read_clock_info(flash_bank_t *bank)
-{
- at91sam7_flash_bank_t *at91sam7_info = bank->driver_priv;
- target_t *target = bank->target;
- u32 mckr, mcfr, pllr;
- unsigned long tmp = 0, mainfreq;
- int flashplane;
-
- /* Read main clock freqency register */
- target_read_u32(target, CKGR_MCFR, &mcfr);
- /* Read master clock register */
- target_read_u32(target, PMC_MCKR, &mckr);
- /* Read Clock Generator PLL Register */
- target_read_u32(target, CKGR_PLLR, &pllr);
-
- at91sam7_info->mck_valid = 0;
- switch (mckr & PMC_MCKR_CSS)
- {
- case 0: /* Slow Clock */
- at91sam7_info->mck_valid = 1;
- mainfreq = RC_FREQ / 16ul * (mcfr & 0xffff);
- tmp = mainfreq;
- break;
- case 1: /* Main Clock */
- if (mcfr & CKGR_MCFR_MAINRDY)
- {
- at91sam7_info->mck_valid = 1;
- mainfreq = RC_FREQ / 16ul * (mcfr & 0xffff);
- tmp = mainfreq;
- }
- break;
-
- case 2: /* Reserved */
- break;
- case 3: /* PLL Clock */
- if (mcfr & CKGR_MCFR_MAINRDY)
- {
- target_read_u32(target, CKGR_PLLR, &pllr);
- if (!(pllr & CKGR_PLLR_DIV))
- break; /* 0 Hz */
- at91sam7_info->mck_valid = 1;
- mainfreq = RC_FREQ / 16ul * (mcfr & 0xffff);
- /* Integer arithmetic should have sufficient precision
- as long as PLL is properly configured. */
- tmp = mainfreq / (pllr & CKGR_PLLR_DIV) *
- (((pllr & CKGR_PLLR_MUL) >> 16) + 1);
- }
- break;
- }
-
- /* Prescaler adjust */
- if (((mckr & PMC_MCKR_PRES) >> 2) == 7)
- at91sam7_info->mck_valid = 0;
- else
- at91sam7_info->mck_freq = tmp >> ((mckr & PMC_MCKR_PRES) >> 2);
-
- /* Forget old flash timing */
- for (flashplane = 0; flashplane<at91sam7_info->num_planes; flashplane++)
- {
- at91sam7_set_flash_mode(bank, flashplane, FMR_TIMING_NONE);
- }
-}
-
-/* Setup the timimg registers for nvbits or normal flash */
-void at91sam7_set_flash_mode(flash_bank_t *bank, u8 flashplane, int mode)
-{
- u32 fmr, fmcn = 0, fws = 0;
- at91sam7_flash_bank_t *at91sam7_info = bank->driver_priv;
- target_t *target = bank->target;
-
- if (mode && (mode != at91sam7_info->flashmode[flashplane]))
- {
- /* Always round up (ceil) */
- if (mode==FMR_TIMING_NVBITS)
- {
- if (at91sam7_info->cidr_arch == 0x60)
- {
- /* AT91SAM7A3 uses master clocks in 100 ns */
- fmcn = (at91sam7_info->mck_freq/10000000ul)+1;
- }
- else
- {
- /* master clocks in 1uS for ARCH 0x7 types */
- fmcn = (at91sam7_info->mck_freq/1000000ul)+1;
- }
- }
- else if (mode==FMR_TIMING_FLASH)
- /* main clocks in 1.5uS */
- fmcn = (at91sam7_info->mck_freq/666666ul)+1;
-
- /* Only allow fmcn=0 if clock period is > 30 us = 33kHz. */
- if (at91sam7_info->mck_freq <= 33333ul)
- fmcn = 0;
- /* Only allow fws=0 if clock frequency is < 30 MHz. */
- if (at91sam7_info->mck_freq > 30000000ul)
- fws = 1;
-
- DEBUG("fmcn[%i]: %i", flashplane, fmcn);
- fmr = fmcn << 16 | fws << 8;
- target_write_u32(target, MC_FMR[flashplane], fmr);
- }
-
- at91sam7_info->flashmode[flashplane] = mode;
-}
-
-u32 at91sam7_wait_status_busy(flash_bank_t *bank, u8 flashplane, u32 waitbits, int timeout)
-{
- u32 status;
-
- while ((!((status = at91sam7_get_flash_status(bank,flashplane)) & waitbits)) && (timeout-- > 0))
- {
- DEBUG("status[%i]: 0x%x", flashplane, status);
- usleep(1000);
- }
-
- DEBUG("status[%i]: 0x%x", flashplane, status);
-
- if (status & 0x0C)
- {
- ERROR("status register: 0x%x", status);
- if (status & 0x4)
- ERROR("Lock Error Bit Detected, Operation Abort");
- if (status & 0x8)
- ERROR("Invalid command and/or bad keyword, Operation Abort");
- if (status & 0x10)
- ERROR("Security Bit Set, Operation Abort");
- }
-
- return status;
-}
-
-
-/* Send one command to the AT91SAM flash controller */
-int at91sam7_flash_command(struct flash_bank_s *bank, u8 flashplane, u8 cmd, u16 pagen)
-{
- u32 fcr;
- at91sam7_flash_bank_t *at91sam7_info = bank->driver_priv;
- target_t *target = bank->target;
-
- fcr = (0x5A<<24) | ((pagen&0x3FF)<<8) | cmd;
- target_write_u32(target, MC_FCR[flashplane], fcr);
- DEBUG("Flash command: 0x%x, flashplane: %i, pagenumber:%u", fcr, flashplane, pagen);
-
- if ((at91sam7_info->cidr_arch == 0x60)&&((cmd==SLB)|(cmd==CLB)))
- {
- /* Lock bit manipulation on AT91SAM7A3 waits for FC_FSR bit 1, EOL */
- if (at91sam7_wait_status_busy(bank, flashplane, MC_FSR_EOL, 10)&0x0C)
- {
- return ERROR_FLASH_OPERATION_FAILED;
- }
- return ERROR_OK;
- }
-
- if (at91sam7_wait_status_busy(bank, flashplane, MC_FSR_FRDY, 10)&0x0C)
- {
- return ERROR_FLASH_OPERATION_FAILED;
- }
- return ERROR_OK;
-}
-
-/* Read device id register, main clock frequency register and fill in driver info structure */
-int at91sam7_read_part_info(struct flash_bank_s *bank)
-{
- at91sam7_flash_bank_t *at91sam7_info = bank->driver_priv;
- target_t *target = bank->target;
- u32 cidr, status;
- int sectornum;
-
- if (bank->target->state != TARGET_HALTED)
- {
- return ERROR_TARGET_NOT_HALTED;
- }
-
- /* Read and parse chip identification register */
- target_read_u32(target, DBGU_CIDR, &cidr);
-
- if (cidr == 0)
- {
- WARNING("Cannot identify target as an AT91SAM");
- return ERROR_FLASH_OPERATION_FAILED;
- }
-
- at91sam7_info->cidr = cidr;
- at91sam7_info->cidr_ext = (cidr>>31)&0x0001;
- at91sam7_info->cidr_nvptyp = (cidr>>28)&0x0007;
- at91sam7_info->cidr_arch = (cidr>>20)&0x00FF;
- at91sam7_info->cidr_sramsiz = (cidr>>16)&0x000F;
- at91sam7_info->cidr_nvpsiz2 = (cidr>>12)&0x000F;
- at91sam7_info->cidr_nvpsiz = (cidr>>8)&0x000F;
- at91sam7_info->cidr_eproc = (cidr>>5)&0x0007;
- at91sam7_info->cidr_version = cidr&0x001F;
- bank->size = NVPSIZ[at91sam7_info->cidr_nvpsiz];
- at91sam7_info->target_name = "Unknown";
-
- /* Support just for bulk erase of a single flash plane, whole device if flash size <= 256k */
- if (NVPSIZ[at91sam7_info->cidr_nvpsiz]<0x80000) /* Flash size less than 512K, one flash plane */
- {
- bank->num_sectors = 1;
- bank->sectors = malloc(sizeof(flash_sector_t));
- bank->sectors[0].offset = 0;
- bank->sectors[0].size = bank->size;
- bank->sectors[0].is_erased = -1;
- bank->sectors[0].is_protected = -1;
- }
- else /* Flash size 512K or larger, several flash planes */
- {
- bank->num_sectors = NVPSIZ[at91sam7_info->cidr_nvpsiz]/0x40000;
- bank->sectors = malloc(bank->num_sectors*sizeof(flash_sector_t));
- for (sectornum=0; sectornum<bank->num_sectors; sectornum++)
- {
- bank->sectors[sectornum].offset = sectornum*0x40000;
- bank->sectors[sectornum].size = 0x40000;
- bank->sectors[sectornum].is_erased = -1;
- bank->sectors[sectornum].is_protected = -1;
- }
- }
-
-
-
- DEBUG("nvptyp: 0x%3.3x, arch: 0x%4.4x", at91sam7_info->cidr_nvptyp, at91sam7_info->cidr_arch );
-
- /* Read main and master clock freqency register */
- at91sam7_read_clock_info(bank);
-
- at91sam7_info->num_planes = 1;
- status = at91sam7_get_flash_status(bank, 0);
- at91sam7_info->securitybit = (status>>4)&0x01;
- at91sam7_protect_check(bank); /* TODO Check the protect check */
-
- if (at91sam7_info->cidr_arch == 0x70 )
- {
- at91sam7_info->num_nvmbits = 2;
- at91sam7_info->nvmbits = (status>>8)&0x03;
- bank->base = 0x100000;
- bank->bus_width = 4;
- if (bank->size==0x80000) /* AT91SAM7S512 */
- {
- at91sam7_info->target_name = "AT91SAM7S512";
- at91sam7_info->num_planes = 2;
- if (at91sam7_info->num_planes != bank->num_sectors)
- WARNING("Internal error: Number of flash planes and erase sectors does not match, please report");;
- at91sam7_info->num_lockbits = 2*16;
- at91sam7_info->pagesize = 256;
- at91sam7_info->pages_in_lockregion = 64;
- at91sam7_info->num_pages = 2*16*64;
- }
- if (bank->size==0x40000) /* AT91SAM7S256 */
- {
- at91sam7_info->target_name = "AT91SAM7S256";
- at91sam7_info->num_lockbits = 16;
- at91sam7_info->pagesize = 256;
- at91sam7_info->pages_in_lockregion = 64;
- at91sam7_info->num_pages = 16*64;
- }
- if (bank->size==0x20000) /* AT91SAM7S128 */
- {
- at91sam7_info->target_name = "AT91SAM7S128";
- at91sam7_info->num_lockbits = 8;
- at91sam7_info->pagesize = 256;
- at91sam7_info->pages_in_lockregion = 64;
- at91sam7_info->num_pages = 8*64;
- }
- if (bank->size==0x10000) /* AT91SAM7S64 */
- {
- at91sam7_info->target_name = "AT91SAM7S64";
- at91sam7_info->num_lockbits = 16;
- at91sam7_info->pagesize = 128;
- at91sam7_info->pages_in_lockregion = 32;
- at91sam7_info->num_pages = 16*32;
- }
- if (bank->size==0x08000) /* AT91SAM7S321/32 */
- {
- at91sam7_info->target_name = "AT91SAM7S321/32";
- at91sam7_info->num_lockbits = 8;
- at91sam7_info->pagesize = 128;
- at91sam7_info->pages_in_lockregion = 32;
- at91sam7_info->num_pages = 8*32;
- }
-
- return ERROR_OK;
- }
-
- if (at91sam7_info->cidr_arch == 0x71 )
- {
- at91sam7_info->num_nvmbits = 3;
- at91sam7_info->nvmbits = (status>>8)&0x07;
- bank->base = 0x100000;
- bank->bus_width = 4;
- if (bank->size==0x80000) /* AT91SAM7XC512 */
- {
- at91sam7_info->target_name = "AT91SAM7XC512";
- at91sam7_info->num_planes = 2;
- if (at91sam7_info->num_planes != bank->num_sectors)
- WARNING("Internal error: Number of flash planes and erase sectors does not match, please report");;
- at91sam7_info->num_lockbits = 2*16;
- at91sam7_info->pagesize = 256;
- at91sam7_info->pages_in_lockregion = 64;
- at91sam7_info->num_pages = 2*16*64;
- }
- if (bank->size==0x40000) /* AT91SAM7XC256 */
- {
- at91sam7_info->target_name = "AT91SAM7XC256";
- at91sam7_info->num_lockbits = 16;
- at91sam7_info->pagesize = 256;
- at91sam7_info->pages_in_lockregion = 64;
- at91sam7_info->num_pages = 16*64;
- }
- if (bank->size==0x20000) /* AT91SAM7XC128 */
- {
- at91sam7_info->target_name = "AT91SAM7XC128";
- at91sam7_info->num_lockbits = 8;
- at91sam7_info->pagesize = 256;
- at91sam7_info->pages_in_lockregion = 64;
- at91sam7_info->num_pages = 8*64;
- }
-
- return ERROR_OK;
- }
-
- if (at91sam7_info->cidr_arch == 0x72 )
- {
- at91sam7_info->num_nvmbits = 3;
- at91sam7_info->nvmbits = (status>>8)&0x07;
- bank->base = 0x100000;
- bank->bus_width = 4;
- if (bank->size==0x80000) /* AT91SAM7SE512 */
- {
- at91sam7_info->target_name = "AT91SAM7SE512";
- at91sam7_info->num_planes = 2;
- if (at91sam7_info->num_planes != bank->num_sectors)
- WARNING("Internal error: Number of flash planes and erase sectors does not match, please report");;
- at91sam7_info->num_lockbits = 32;
- at91sam7_info->pagesize = 256;
- at91sam7_info->pages_in_lockregion = 64;
- at91sam7_info->num_pages = 32*64;
- }
- if (bank->size==0x40000)
- {
- at91sam7_info->target_name = "AT91SAM7SE256";
- at91sam7_info->num_lockbits = 16;
- at91sam7_info->pagesize = 256;
- at91sam7_info->pages_in_lockregion = 64;
- at91sam7_info->num_pages = 16*64;
- }
- if (bank->size==0x08000)
- {
- at91sam7_info->target_name = "AT91SAM7SE32";
- at91sam7_info->num_lockbits = 8;
- at91sam7_info->pagesize = 128;
- at91sam7_info->pages_in_lockregion = 32;
- at91sam7_info->num_pages = 8*32;
- }
-
- return ERROR_OK;
- }
-
- if (at91sam7_info->cidr_arch == 0x75 )
- {
- at91sam7_info->num_nvmbits = 3;
- at91sam7_info->nvmbits = (status>>8)&0x07;
- bank->base = 0x100000;
- bank->bus_width = 4;
- if (bank->size==0x80000) /* AT91SAM7X512 */
- {
- at91sam7_info->target_name = "AT91SAM7X512";
- at91sam7_info->num_planes = 2;
- if (at91sam7_info->num_planes != bank->num_sectors)
- WARNING("Internal error: Number of flash planes and erase sectors does not match, please report");;
- at91sam7_info->num_lockbits = 32;
- at91sam7_info->pagesize = 256;
- at91sam7_info->pages_in_lockregion = 64;
- at91sam7_info->num_pages = 2*16*64;
- DEBUG("Support for AT91SAM7X512 is experimental in this version!");
- }
- if (bank->size==0x40000) /* AT91SAM7X256 */
- {
- at91sam7_info->target_name = "AT91SAM7X256";
- at91sam7_info->num_lockbits = 16;
- at91sam7_info->pagesize = 256;
- at91sam7_info->pages_in_lockregion = 64;
- at91sam7_info->num_pages = 16*64;
- }
- if (bank->size==0x20000) /* AT91SAM7X128 */
- {
- at91sam7_info->target_name = "AT91SAM7X128";
- at91sam7_info->num_lockbits = 8;
- at91sam7_info->pagesize = 256;
- at91sam7_info->pages_in_lockregion = 64;
- at91sam7_info->num_pages = 8*64;
- }
-
- return ERROR_OK;
- }
-
- if (at91sam7_info->cidr_arch == 0x60 )
- {
- at91sam7_info->num_nvmbits = 3;
- at91sam7_info->nvmbits = (status>>8)&0x07;
- bank->base = 0x100000;
- bank->bus_width = 4;
-
- if (bank->size == 0x40000) /* AT91SAM7A3 */
- {
- at91sam7_info->target_name = "AT91SAM7A3";
- at91sam7_info->num_lockbits = 16;
- at91sam7_info->pagesize = 256;
- at91sam7_info->pages_in_lockregion = 16;
- at91sam7_info->num_pages = 16*64;
- }
- return ERROR_OK;
- }
-
- WARNING("at91sam7 flash only tested for AT91SAM7Sxx series");
-
- return ERROR_OK;
-}
-
-int at91sam7_erase_check(struct flash_bank_s *bank)
-{
- at91sam7_flash_bank_t *at91sam7_info = bank->driver_priv;
-
- if (!at91sam7_info->working_area_size)
- {
- }
- else
- {
- }
-
- return ERROR_OK;
-}
-
-int at91sam7_protect_check(struct flash_bank_s *bank)
-{
- u32 status;
- int flashplane;
-
- at91sam7_flash_bank_t *at91sam7_info = bank->driver_priv;
-
- if (at91sam7_info->cidr == 0)
- {
- at91sam7_read_part_info(bank);
- }
-
- if (at91sam7_info->cidr == 0)
- {
- WARNING("Cannot identify target as an AT91SAM");
- return ERROR_FLASH_OPERATION_FAILED;
- }
-
- for (flashplane=0;flashplane<at91sam7_info->num_planes;flashplane++)
- {
- status = at91sam7_get_flash_status(bank, flashplane);
- at91sam7_info->lockbits[flashplane] = (status >> 16);
- }
-
- return ERROR_OK;
-}
-
-/* flash_bank at91sam7 0 0 0 0 <target#>
- */
-int at91sam7_flash_bank_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc, struct flash_bank_s *bank)
-{
- at91sam7_flash_bank_t *at91sam7_info;
- int i;
-
- if (argc < 6)
- {
- WARNING("incomplete flash_bank at91sam7 configuration");
- return ERROR_FLASH_BANK_INVALID;
- }
-
- at91sam7_info = malloc(sizeof(at91sam7_flash_bank_t));
- bank->driver_priv = at91sam7_info;
- at91sam7_info->probed = 0;
-
- /* part wasn't probed for info yet */
- at91sam7_info->cidr = 0;
- for (i=0;i<4;i++)
- at91sam7_info->flashmode[i]=0;
-
- return ERROR_OK;
-}
-
-int at91sam7_erase(struct flash_bank_s *bank, int first, int last)
-{
- at91sam7_flash_bank_t *at91sam7_info = bank->driver_priv;
- u8 flashplane;
-
- if (bank->target->state != TARGET_HALTED)
- {
- return ERROR_TARGET_NOT_HALTED;
- }
-
- if (at91sam7_info->cidr == 0)
- {
- at91sam7_read_part_info(bank);
- }
-
- if (at91sam7_info->cidr == 0)
- {
- WARNING("Cannot identify target as an AT91SAM");
- return ERROR_FLASH_OPERATION_FAILED;
- }
-
- if ((first < 0) || (last < first) || (last >= bank->num_sectors))
- {
- if ((first == 0) && (last == (at91sam7_info->num_lockbits-1)))
- {
- WARNING("Sector numbers based on lockbit count, probably a deprecated script");
- last = bank->num_sectors-1;
- }
- else return ERROR_FLASH_SECTOR_INVALID;
- }
-
- /* Configure the flash controller timing */
- at91sam7_read_clock_info(bank);
- for (flashplane = first; flashplane<=last; flashplane++)
- {
- /* Configure the flash controller timing */
- at91sam7_set_flash_mode(bank, flashplane, FMR_TIMING_FLASH);
- if (at91sam7_flash_command(bank, flashplane, EA, 0) != ERROR_OK)
- {
- return ERROR_FLASH_OPERATION_FAILED;
- }
- }
- return ERROR_OK;
-
-}
-
-int at91sam7_protect(struct flash_bank_s *bank, int set, int first, int last)
-{
- u32 cmd, pagen;
- u8 flashplane;
- int lockregion;
-
- at91sam7_flash_bank_t *at91sam7_info = bank->driver_priv;
-
- if (bank->target->state != TARGET_HALTED)
- {
- return ERROR_TARGET_NOT_HALTED;
- }
-
- if ((first < 0) || (last < first) || (last >= at91sam7_info->num_lockbits))
- {
- return ERROR_FLASH_SECTOR_INVALID;
- }
-
- if (at91sam7_info->cidr == 0)
- {
- at91sam7_read_part_info(bank);
- }
-
- if (at91sam7_info->cidr == 0)
- {
- WARNING("Cannot identify target as an AT91SAM");
- return ERROR_FLASH_OPERATION_FAILED;
- }
-
- at91sam7_read_clock_info(bank);
-
- for (lockregion=first;lockregion<=last;lockregion++)
- {
- pagen = lockregion*at91sam7_info->pages_in_lockregion;
- flashplane = (pagen>>10)&0x03;
- /* Configure the flash controller timing */
- at91sam7_set_flash_mode(bank, flashplane, FMR_TIMING_NVBITS);
-
- if (set)
- cmd = SLB;
- else
- cmd = CLB;
-
- if (at91sam7_flash_command(bank, flashplane, cmd, pagen) != ERROR_OK)
- {
- return ERROR_FLASH_OPERATION_FAILED;
- }
- }
-
- at91sam7_protect_check(bank);
-
- return ERROR_OK;
-}
-
-
-int at91sam7_write(struct flash_bank_s *bank, u8 *buffer, u32 offset, u32 count)
-{
- at91sam7_flash_bank_t *at91sam7_info = bank->driver_priv;
- target_t *target = bank->target;
- u32 dst_min_alignment, wcount, bytes_remaining = count;
- u32 first_page, last_page, pagen, buffer_pos;
- u8 flashplane;
-
- if (bank->target->state != TARGET_HALTED)
- {
- return ERROR_TARGET_NOT_HALTED;
- }
-
- if (at91sam7_info->cidr == 0)
- {
- at91sam7_read_part_info(bank);
- }
-
- if (at91sam7_info->cidr == 0)
- {
- WARNING("Cannot identify target as an AT91SAM");
- return ERROR_FLASH_OPERATION_FAILED;
- }
-
- if (offset + count > bank->size)
- return ERROR_FLASH_DST_OUT_OF_BANK;
-
- dst_min_alignment = at91sam7_info->pagesize;
-
- if (offset % dst_min_alignment)
- {
- WARNING("offset 0x%x breaks required alignment 0x%x", offset, dst_min_alignment);
- return ERROR_FLASH_DST_BREAKS_ALIGNMENT;
- }
-
- if (at91sam7_info->cidr_arch == 0)
- return ERROR_FLASH_BANK_NOT_PROBED;
-
- first_page = offset/dst_min_alignment;
- last_page = CEIL(offset + count, dst_min_alignment);
-
- DEBUG("first_page: %i, last_page: %i, count %i", first_page, last_page, count);
-
- at91sam7_read_clock_info(bank);
-
- for (pagen=first_page; pagen<last_page; pagen++)
- {
- if (bytes_remaining<dst_min_alignment)
- count = bytes_remaining;
- else
- count = dst_min_alignment;
- bytes_remaining -= count;
-
- /* Write one block to the PageWriteBuffer */
- buffer_pos = (pagen-first_page)*dst_min_alignment;
- wcount = CEIL(count,4);
- target->type->write_memory(target, bank->base+pagen*dst_min_alignment, 4, wcount, buffer+buffer_pos);
- flashplane = (pagen>>10)&0x3;
-
- /* Configure the flash controller timing */
- at91sam7_set_flash_mode(bank, flashplane, FMR_TIMING_FLASH);
- /* Send Write Page command to Flash Controller */
- if (at91sam7_flash_command(bank, flashplane, WP, pagen) != ERROR_OK)
- {
- return ERROR_FLASH_OPERATION_FAILED;
- }
- DEBUG("Write flash plane:%i page number:%i", flashplane, pagen);
- }
-
- return ERROR_OK;
-}
-
-
-int at91sam7_probe(struct flash_bank_s *bank)
-{
- /* we can't probe on an at91sam7
- * if this is an at91sam7, it has the configured flash
- */
- at91sam7_flash_bank_t *at91sam7_info = bank->driver_priv;
- at91sam7_info->probed = 0;
-
- if (at91sam7_info->cidr == 0)
- {
- at91sam7_read_part_info(bank);
- }
-
- if (at91sam7_info->cidr == 0)
- {
- WARNING("Cannot identify target as an AT91SAM");
- return ERROR_FLASH_OPERATION_FAILED;
- }
-
- at91sam7_info->probed = 1;
-
- return ERROR_OK;
-}
-
-
-int at91sam7_auto_probe(struct flash_bank_s *bank)
-{
- at91sam7_flash_bank_t *at91sam7_info = bank->driver_priv;
- if (at91sam7_info->probed)
- return ERROR_OK;
- return at91sam7_probe(bank);
-}
-
-int at91sam7_info(struct flash_bank_s *bank, char *buf, int buf_size)
-{
- int printed, flashplane;
- at91sam7_flash_bank_t *at91sam7_info = bank->driver_priv;
-
- at91sam7_read_part_info(bank);
-
- if (at91sam7_info->cidr == 0)
- {
- printed = snprintf(buf, buf_size, "Cannot identify target as an AT91SAM\n");
- buf += printed;
- buf_size -= printed;
- return ERROR_FLASH_OPERATION_FAILED;
- }
-
- printed = snprintf(buf, buf_size, "\nat91sam7 information: Chip is %s\n",at91sam7_info->target_name);
- buf += printed;
- buf_size -= printed;
-
- printed = snprintf(buf, buf_size, "cidr: 0x%8.8x, arch: 0x%4.4x, eproc: %s, version:0x%3.3x, flashsize: 0x%8.8x\n",
- at91sam7_info->cidr, at91sam7_info->cidr_arch, EPROC[at91sam7_info->cidr_eproc], at91sam7_info->cidr_version, bank->size);
- buf += printed;
- buf_size -= printed;
-
- printed = snprintf(buf, buf_size, "master clock(estimated): %ikHz \n", at91sam7_info->mck_freq / 1000);
- buf += printed;
- buf_size -= printed;
-
- if (at91sam7_info->num_planes>1) {
- printed = snprintf(buf, buf_size, "flashplanes: %i, pagesize: %i, lock regions: %i, pages in lock region: %i \n",
- at91sam7_info->num_planes, at91sam7_info->pagesize, at91sam7_info->num_lockbits, at91sam7_info->num_pages/at91sam7_info->num_lockbits);
- buf += printed;
- buf_size -= printed;
- for (flashplane=0; flashplane<at91sam7_info->num_planes; flashplane++)
- {
- printed = snprintf(buf, buf_size, "lockbits[%i]: 0x%4.4x, ", flashplane, at91sam7_info->lockbits[flashplane]);
- buf += printed;
- buf_size -= printed;
- }
- }
- else
- if (at91sam7_info->num_lockbits>0) {
- printed = snprintf(buf, buf_size, "pagesize: %i, lockbits: %i 0x%4.4x, pages in lock region: %i \n",
- at91sam7_info->pagesize, at91sam7_info->num_lockbits, at91sam7_info->lockbits[0], at91sam7_info->num_pages/at91sam7_info->num_lockbits);
- buf += printed;
- buf_size -= printed;
- }
-
- printed = snprintf(buf, buf_size, "securitybit: %i, nvmbits: 0x%1.1x\n", at91sam7_info->securitybit, at91sam7_info->nvmbits);
- buf += printed;
- buf_size -= printed;
-
- return ERROR_OK;
-}
-
-/*
-* On AT91SAM7S: When the gpnvm bits are set with
-* > at91sam7 gpnvm 0 bitnr set
-* the changes are not visible in the flash controller status register MC_FSR
-* until the processor has been reset.
-* On the Olimex board this requires a power cycle.
-* Note that the AT91SAM7S has the following errata (doc6175.pdf sec 14.1.3):
-* The maximum number of write/erase cycles for Non Volatile Memory bits is 100. This includes
-* Lock Bits (LOCKx), General Purpose NVM bits (GPNVMx) and the Security Bit.
-*/
-int at91sam7_handle_gpnvm_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)
-{
- flash_bank_t *bank;
- int bit;
- u8 flashcmd;
- u32 status;
- char *value;
- at91sam7_flash_bank_t *at91sam7_info;
-
- if (argc < 3)
- {
- command_print(cmd_ctx, "at91sam7 gpnvm <num> <bit> <set|clear>");
- return ERROR_OK;
- }
-
- bank = get_flash_bank_by_num(strtoul(args[0], NULL, 0));
- bit = atoi(args[1]);
- value = args[2];
-
- if (!bank)
- {
- command_print(cmd_ctx, "flash bank '#%s' is out of bounds", args[0]);
- return ERROR_OK;
- }
-
- at91sam7_info = bank->driver_priv;
-
- if (bank->target->state != TARGET_HALTED)
- {
- return ERROR_TARGET_NOT_HALTED;
- }
-
- if (at91sam7_info->cidr == 0)
- {
- at91sam7_read_part_info(bank);
- }
-
- if (at91sam7_info->cidr == 0)
- {
- WARNING("Cannot identify target as an AT91SAM");
- return ERROR_FLASH_OPERATION_FAILED;
- }
-
- if ((bit<0) || (at91sam7_info->num_nvmbits <= bit))
- {
- command_print(cmd_ctx, "gpnvm bit '#%s' is out of bounds for target %s", args[1],at91sam7_info->target_name);
- return ERROR_OK;
- }
-
- if (strcmp(value, "set") == 0)
- {
- flashcmd = SGPB;
- }
- else if (strcmp(value, "clear") == 0)
- {
- flashcmd = CGPB;
- }
- else
- {
- command_print(cmd_ctx, "usage: at91sam7 gpnvm <num> <bit> <set|clear>");
- return ERROR_OK;
- }
-
- /* Configure the flash controller timing */
- at91sam7_read_clock_info(bank);
- at91sam7_set_flash_mode(bank, 0, FMR_TIMING_NVBITS);
-
- if (at91sam7_flash_command(bank, 0, flashcmd, (u16)(bit)) != ERROR_OK)
- {
- return ERROR_FLASH_OPERATION_FAILED;
- }
-
- status = at91sam7_get_flash_status(bank, 0);
- DEBUG("at91sam7_handle_gpnvm_command: cmd 0x%x, value 0x%x, status 0x%x \n",flashcmd,bit,status);
- at91sam7_info->nvmbits = (status>>8)&((1<<at91sam7_info->num_nvmbits)-1);
-
- return ERROR_OK;
-}
+/***************************************************************************\r
+ * Copyright (C) 2006 by Magnus Lundin *\r
+ * lundin@mlu.mine.nu *\r
+ * *\r
+ * This program is free software; you can redistribute it and/or modify *\r
+ * it under the terms of the GNU General Public License as published by *\r
+ * the Free Software Foundation; either version 2 of the License, or *\r
+ * (at your option) any later version. *\r
+ * *\r
+ * This program is distributed in the hope that it will be useful, *\r
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of *\r
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *\r
+ * GNU General Public License for more details. *\r
+ * *\r
+ * You should have received a copy of the GNU General Public License *\r
+ * along with this program; if not, write to the *\r
+ * Free Software Foundation, Inc., *\r
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *\r
+ ***************************************************************************/\r
+\r
+/***************************************************************************\r
+There are some things to notice\r
+\r
+* AT91SAM7S64 is tested\r
+* All AT91SAM7Sxx and AT91SAM7Xxx should work but is not tested\r
+* All parameters are identified from onchip configuartion registers \r
+*\r
+* The flash controller handles erases automatically on a page (128/265 byte) basis\r
+* Only an EraseAll command is supported by the controller\r
+* Partial erases can be implemented in software by writing one 0xFFFFFFFF word to \r
+* some location in every page in the region to be erased\r
+* \r
+* Lock regions (sectors) are 32 or 64 pages\r
+*\r
+ ***************************************************************************/\r
+#ifdef HAVE_CONFIG_H\r
+#include "config.h"\r
+#endif\r
+\r
+#include "replacements.h"\r
+\r
+#include "at91sam7.h"\r
+\r
+#include "flash.h"\r
+#include "target.h"\r
+#include "log.h"\r
+#include "binarybuffer.h"\r
+#include "types.h"\r
+\r
+#include <stdlib.h>\r
+#include <string.h>\r
+#include <unistd.h>\r
+\r
+int at91sam7_register_commands(struct command_context_s *cmd_ctx);\r
+int at91sam7_flash_bank_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc, struct flash_bank_s *bank);\r
+int at91sam7_erase(struct flash_bank_s *bank, int first, int last);\r
+int at91sam7_protect(struct flash_bank_s *bank, int set, int first, int last);\r
+int at91sam7_write(struct flash_bank_s *bank, u8 *buffer, u32 offset, u32 count);\r
+int at91sam7_probe(struct flash_bank_s *bank);\r
+int at91sam7_auto_probe(struct flash_bank_s *bank);\r
+int at91sam7_erase_check(struct flash_bank_s *bank);\r
+int at91sam7_protect_check(struct flash_bank_s *bank);\r
+int at91sam7_info(struct flash_bank_s *bank, char *buf, int buf_size);\r
+\r
+u32 at91sam7_get_flash_status(flash_bank_t *bank, u8 flashplane);\r
+void at91sam7_set_flash_mode(flash_bank_t *bank, u8 flashplane, int mode);\r
+u32 at91sam7_wait_status_busy(flash_bank_t *bank, u8 flashplane, u32 waitbits, int timeout);\r
+int at91sam7_flash_command(struct flash_bank_s *bank, u8 flashplane, u8 cmd, u16 pagen); \r
+int at91sam7_handle_gpnvm_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc);\r
+\r
+flash_driver_t at91sam7_flash =\r
+{\r
+ .name = "at91sam7",\r
+ .register_commands = at91sam7_register_commands,\r
+ .flash_bank_command = at91sam7_flash_bank_command,\r
+ .erase = at91sam7_erase,\r
+ .protect = at91sam7_protect,\r
+ .write = at91sam7_write,\r
+ .probe = at91sam7_probe,\r
+ .auto_probe = at91sam7_auto_probe,\r
+ .erase_check = at91sam7_erase_check,\r
+ .protect_check = at91sam7_protect_check,\r
+ .info = at91sam7_info\r
+};\r
+\r
+u32 MC_FMR[4] = { 0xFFFFFF60, 0xFFFFFF70, 0xFFFFFF80, 0xFFFFFF90 };\r
+u32 MC_FCR[4] = { 0xFFFFFF64, 0xFFFFFF74, 0xFFFFFF84, 0xFFFFFF94 };\r
+u32 MC_FSR[4] = { 0xFFFFFF68, 0xFFFFFF78, 0xFFFFFF88, 0xFFFFFF98 };\r
+\r
+char * EPROC[8]= {"Unknown","ARM946-E","ARM7TDMI","Unknown","ARM920T","ARM926EJ-S","Unknown","Unknown"};\r
+long NVPSIZ[16] = {\r
+ 0,\r
+ 0x2000, /* 8K */\r
+ 0x4000, /* 16K */ \r
+ 0x8000, /* 32K */\r
+ -1,\r
+ 0x10000, /* 64K */\r
+ -1,\r
+ 0x20000, /* 128K */\r
+ -1,\r
+ 0x40000, /* 256K */\r
+ 0x80000, /* 512K */\r
+ -1,\r
+ 0x100000, /* 1024K */\r
+ -1,\r
+ 0x200000, /* 2048K */\r
+ -1\r
+};\r
+\r
+long SRAMSIZ[16] = {\r
+ -1,\r
+ 0x0400, /* 1K */\r
+ 0x0800, /* 2K */ \r
+ -1, \r
+ 0x1c000, /* 112K */\r
+ 0x1000, /* 4K */\r
+ 0x14000, /* 80K */\r
+ 0x28000, /* 160K */\r
+ 0x2000, /* 8K */\r
+ 0x4000, /* 16K */\r
+ 0x8000, /* 32K */\r
+ 0x10000, /* 64K */\r
+ 0x20000, /* 128K */\r
+ 0x40000, /* 256K */\r
+ 0x18000, /* 96K */\r
+ 0x80000, /* 512K */\r
+};\r
+\r
+int at91sam7_register_commands(struct command_context_s *cmd_ctx)\r
+{\r
+ command_t *at91sam7_cmd = register_command(cmd_ctx, NULL, "at91sam7", NULL, COMMAND_ANY, NULL);\r
+ register_command(cmd_ctx, at91sam7_cmd, "gpnvm", at91sam7_handle_gpnvm_command, COMMAND_EXEC,\r
+ "at91sam7 gpnvm <num> <bit> set|clear, set or clear at91sam7 gpnvm bit");\r
+\r
+ return ERROR_OK;\r
+}\r
+\r
+u32 at91sam7_get_flash_status(flash_bank_t *bank, u8 flashplane)\r
+{\r
+ target_t *target = bank->target;\r
+ u32 fsr;\r
+ \r
+ target_read_u32(target, MC_FSR[flashplane], &fsr);\r
+ \r
+ return fsr;\r
+}\r
+\r
+/** Read clock configuration and set at91sam7_info->usec_clocks*/ \r
+void at91sam7_read_clock_info(flash_bank_t *bank)\r
+{\r
+ at91sam7_flash_bank_t *at91sam7_info = bank->driver_priv;\r
+ target_t *target = bank->target;\r
+ u32 mckr, mcfr, pllr;\r
+ unsigned long tmp = 0, mainfreq;\r
+ int flashplane;\r
+\r
+ /* Read main clock freqency register */\r
+ target_read_u32(target, CKGR_MCFR, &mcfr);\r
+ /* Read master clock register */\r
+ target_read_u32(target, PMC_MCKR, &mckr);\r
+ /* Read Clock Generator PLL Register */\r
+ target_read_u32(target, CKGR_PLLR, &pllr);\r
+\r
+ at91sam7_info->mck_valid = 0;\r
+ switch (mckr & PMC_MCKR_CSS) \r
+ {\r
+ case 0: /* Slow Clock */\r
+ at91sam7_info->mck_valid = 1;\r
+ mainfreq = RC_FREQ / 16ul * (mcfr & 0xffff);\r
+ tmp = mainfreq;\r
+ break;\r
+ case 1: /* Main Clock */\r
+ if (mcfr & CKGR_MCFR_MAINRDY) \r
+ {\r
+ at91sam7_info->mck_valid = 1;\r
+ mainfreq = RC_FREQ / 16ul * (mcfr & 0xffff);\r
+ tmp = mainfreq;\r
+ }\r
+ break;\r
+\r
+ case 2: /* Reserved */\r
+ break;\r
+ case 3: /* PLL Clock */\r
+ if (mcfr & CKGR_MCFR_MAINRDY) \r
+ {\r
+ target_read_u32(target, CKGR_PLLR, &pllr);\r
+ if (!(pllr & CKGR_PLLR_DIV))\r
+ break; /* 0 Hz */\r
+ at91sam7_info->mck_valid = 1;\r
+ mainfreq = RC_FREQ / 16ul * (mcfr & 0xffff);\r
+ /* Integer arithmetic should have sufficient precision\r
+ as long as PLL is properly configured. */\r
+ tmp = mainfreq / (pllr & CKGR_PLLR_DIV) *\r
+ (((pllr & CKGR_PLLR_MUL) >> 16) + 1);\r
+ }\r
+ break;\r
+ }\r
+ \r
+ /* Prescaler adjust */\r
+ if (((mckr & PMC_MCKR_PRES) >> 2) == 7)\r
+ at91sam7_info->mck_valid = 0;\r
+ else\r
+ at91sam7_info->mck_freq = tmp >> ((mckr & PMC_MCKR_PRES) >> 2);\r
+\r
+ /* Forget old flash timing */\r
+ for (flashplane = 0; flashplane<at91sam7_info->num_planes; flashplane++)\r
+ {\r
+ at91sam7_set_flash_mode(bank, flashplane, FMR_TIMING_NONE);\r
+ }\r
+}\r
+\r
+/* Setup the timimg registers for nvbits or normal flash */\r
+void at91sam7_set_flash_mode(flash_bank_t *bank, u8 flashplane, int mode)\r
+{\r
+ u32 fmr, fmcn = 0, fws = 0;\r
+ at91sam7_flash_bank_t *at91sam7_info = bank->driver_priv;\r
+ target_t *target = bank->target;\r
+ \r
+ if (mode && (mode != at91sam7_info->flashmode[flashplane]))\r
+ {\r
+ /* Always round up (ceil) */\r
+ if (mode==FMR_TIMING_NVBITS)\r
+ {\r
+ if (at91sam7_info->cidr_arch == 0x60)\r
+ {\r
+ /* AT91SAM7A3 uses master clocks in 100 ns */\r
+ fmcn = (at91sam7_info->mck_freq/10000000ul)+1;\r
+ }\r
+ else\r
+ {\r
+ /* master clocks in 1uS for ARCH 0x7 types */\r
+ fmcn = (at91sam7_info->mck_freq/1000000ul)+1;\r
+ }\r
+ }\r
+ else if (mode==FMR_TIMING_FLASH)\r
+ /* main clocks in 1.5uS */\r
+ fmcn = (at91sam7_info->mck_freq/666666ul)+1;\r
+\r
+ /* Only allow fmcn=0 if clock period is > 30 us = 33kHz. */\r
+ if (at91sam7_info->mck_freq <= 33333ul)\r
+ fmcn = 0;\r
+ /* Only allow fws=0 if clock frequency is < 30 MHz. */\r
+ if (at91sam7_info->mck_freq > 30000000ul)\r
+ fws = 1;\r
+\r
+ DEBUG("fmcn[%i]: %i", flashplane, fmcn); \r
+ fmr = fmcn << 16 | fws << 8;\r
+ target_write_u32(target, MC_FMR[flashplane], fmr);\r
+ }\r
+ \r
+ at91sam7_info->flashmode[flashplane] = mode; \r
+}\r
+\r
+u32 at91sam7_wait_status_busy(flash_bank_t *bank, u8 flashplane, u32 waitbits, int timeout)\r
+{\r
+ u32 status;\r
+ \r
+ while ((!((status = at91sam7_get_flash_status(bank,flashplane)) & waitbits)) && (timeout-- > 0))\r
+ {\r
+ DEBUG("status[%i]: 0x%x", flashplane, status);\r
+ usleep(1000);\r
+ }\r
+ \r
+ DEBUG("status[%i]: 0x%x", flashplane, status);\r
+\r
+ if (status & 0x0C)\r
+ {\r
+ ERROR("status register: 0x%x", status);\r
+ if (status & 0x4)\r
+ ERROR("Lock Error Bit Detected, Operation Abort");\r
+ if (status & 0x8)\r
+ ERROR("Invalid command and/or bad keyword, Operation Abort");\r
+ if (status & 0x10)\r
+ ERROR("Security Bit Set, Operation Abort");\r
+ }\r
+ \r
+ return status;\r
+}\r
+\r
+\r
+/* Send one command to the AT91SAM flash controller */\r
+int at91sam7_flash_command(struct flash_bank_s *bank, u8 flashplane, u8 cmd, u16 pagen) \r
+{\r
+ u32 fcr;\r
+ at91sam7_flash_bank_t *at91sam7_info = bank->driver_priv;\r
+ target_t *target = bank->target;\r
+\r
+ fcr = (0x5A<<24) | ((pagen&0x3FF)<<8) | cmd; \r
+ target_write_u32(target, MC_FCR[flashplane], fcr);\r
+ DEBUG("Flash command: 0x%x, flashplane: %i, pagenumber:%u", fcr, flashplane, pagen);\r
+\r
+ if ((at91sam7_info->cidr_arch == 0x60)&&((cmd==SLB)|(cmd==CLB)))\r
+ {\r
+ /* Lock bit manipulation on AT91SAM7A3 waits for FC_FSR bit 1, EOL */\r
+ if (at91sam7_wait_status_busy(bank, flashplane, MC_FSR_EOL, 10)&0x0C) \r
+ {\r
+ return ERROR_FLASH_OPERATION_FAILED;\r
+ }\r
+ return ERROR_OK;\r
+ }\r
+\r
+ if (at91sam7_wait_status_busy(bank, flashplane, MC_FSR_FRDY, 10)&0x0C) \r
+ {\r
+ return ERROR_FLASH_OPERATION_FAILED;\r
+ }\r
+ return ERROR_OK;\r
+}\r
+\r
+/* Read device id register, main clock frequency register and fill in driver info structure */\r
+int at91sam7_read_part_info(struct flash_bank_s *bank)\r
+{\r
+ at91sam7_flash_bank_t *at91sam7_info = bank->driver_priv;\r
+ target_t *target = bank->target;\r
+ u32 cidr, status;\r
+ int sectornum;\r
+ \r
+ if (bank->target->state != TARGET_HALTED)\r
+ {\r
+ return ERROR_TARGET_NOT_HALTED;\r
+ }\r
+ \r
+ /* Read and parse chip identification register */\r
+ target_read_u32(target, DBGU_CIDR, &cidr);\r
+ \r
+ if (cidr == 0)\r
+ {\r
+ WARNING("Cannot identify target as an AT91SAM");\r
+ return ERROR_FLASH_OPERATION_FAILED;\r
+ }\r
+ \r
+ at91sam7_info->cidr = cidr;\r
+ at91sam7_info->cidr_ext = (cidr>>31)&0x0001;\r
+ at91sam7_info->cidr_nvptyp = (cidr>>28)&0x0007;\r
+ at91sam7_info->cidr_arch = (cidr>>20)&0x00FF;\r
+ at91sam7_info->cidr_sramsiz = (cidr>>16)&0x000F;\r
+ at91sam7_info->cidr_nvpsiz2 = (cidr>>12)&0x000F;\r
+ at91sam7_info->cidr_nvpsiz = (cidr>>8)&0x000F;\r
+ at91sam7_info->cidr_eproc = (cidr>>5)&0x0007;\r
+ at91sam7_info->cidr_version = cidr&0x001F;\r
+ bank->size = NVPSIZ[at91sam7_info->cidr_nvpsiz];\r
+ at91sam7_info->target_name = "Unknown";\r
+\r
+ /* Support just for bulk erase of a single flash plane, whole device if flash size <= 256k */\r
+ if (NVPSIZ[at91sam7_info->cidr_nvpsiz]<0x80000) /* Flash size less than 512K, one flash plane */\r
+ {\r
+ bank->num_sectors = 1;\r
+ bank->sectors = malloc(sizeof(flash_sector_t));\r
+ bank->sectors[0].offset = 0;\r
+ bank->sectors[0].size = bank->size;\r
+ bank->sectors[0].is_erased = -1;\r
+ bank->sectors[0].is_protected = -1;\r
+ }\r
+ else /* Flash size 512K or larger, several flash planes */\r
+ {\r
+ bank->num_sectors = NVPSIZ[at91sam7_info->cidr_nvpsiz]/0x40000;\r
+ bank->sectors = malloc(bank->num_sectors*sizeof(flash_sector_t));\r
+ for (sectornum=0; sectornum<bank->num_sectors; sectornum++)\r
+ {\r
+ bank->sectors[sectornum].offset = sectornum*0x40000;\r
+ bank->sectors[sectornum].size = 0x40000;\r
+ bank->sectors[sectornum].is_erased = -1;\r
+ bank->sectors[sectornum].is_protected = -1;\r
+ }\r
+ }\r
+ \r
+ \r
+\r
+ DEBUG("nvptyp: 0x%3.3x, arch: 0x%4.4x", at91sam7_info->cidr_nvptyp, at91sam7_info->cidr_arch );\r
+\r
+ /* Read main and master clock freqency register */\r
+ at91sam7_read_clock_info(bank);\r
+ \r
+ at91sam7_info->num_planes = 1;\r
+ status = at91sam7_get_flash_status(bank, 0);\r
+ at91sam7_info->securitybit = (status>>4)&0x01;\r
+ at91sam7_protect_check(bank); /* TODO Check the protect check */\r
+ \r
+ if (at91sam7_info->cidr_arch == 0x70 )\r
+ {\r
+ at91sam7_info->num_nvmbits = 2;\r
+ at91sam7_info->nvmbits = (status>>8)&0x03;\r
+ bank->base = 0x100000;\r
+ bank->bus_width = 4;\r
+ if (bank->size==0x80000) /* AT91SAM7S512 */\r
+ {\r
+ at91sam7_info->target_name = "AT91SAM7S512";\r
+ at91sam7_info->num_planes = 2;\r
+ if (at91sam7_info->num_planes != bank->num_sectors)\r
+ WARNING("Internal error: Number of flash planes and erase sectors does not match, please report");;\r
+ at91sam7_info->num_lockbits = 2*16;\r
+ at91sam7_info->pagesize = 256;\r
+ at91sam7_info->pages_in_lockregion = 64;\r
+ at91sam7_info->num_pages = 2*16*64;\r
+ }\r
+ if (bank->size==0x40000) /* AT91SAM7S256 */\r
+ {\r
+ at91sam7_info->target_name = "AT91SAM7S256";\r
+ at91sam7_info->num_lockbits = 16;\r
+ at91sam7_info->pagesize = 256;\r
+ at91sam7_info->pages_in_lockregion = 64;\r
+ at91sam7_info->num_pages = 16*64;\r
+ }\r
+ if (bank->size==0x20000) /* AT91SAM7S128 */\r
+ {\r
+ at91sam7_info->target_name = "AT91SAM7S128";\r
+ at91sam7_info->num_lockbits = 8;\r
+ at91sam7_info->pagesize = 256;\r
+ at91sam7_info->pages_in_lockregion = 64;\r
+ at91sam7_info->num_pages = 8*64;\r
+ }\r
+ if (bank->size==0x10000) /* AT91SAM7S64 */\r
+ {\r
+ at91sam7_info->target_name = "AT91SAM7S64";\r
+ at91sam7_info->num_lockbits = 16;\r
+ at91sam7_info->pagesize = 128;\r
+ at91sam7_info->pages_in_lockregion = 32;\r
+ at91sam7_info->num_pages = 16*32;\r
+ }\r
+ if (bank->size==0x08000) /* AT91SAM7S321/32 */\r
+ {\r
+ at91sam7_info->target_name = "AT91SAM7S321/32";\r
+ at91sam7_info->num_lockbits = 8;\r
+ at91sam7_info->pagesize = 128;\r
+ at91sam7_info->pages_in_lockregion = 32;\r
+ at91sam7_info->num_pages = 8*32;\r
+ }\r
+ \r
+ return ERROR_OK;\r
+ }\r
+\r
+ if (at91sam7_info->cidr_arch == 0x71 )\r
+ {\r
+ at91sam7_info->num_nvmbits = 3;\r
+ at91sam7_info->nvmbits = (status>>8)&0x07;\r
+ bank->base = 0x100000;\r
+ bank->bus_width = 4;\r
+ if (bank->size==0x80000) /* AT91SAM7XC512 */\r
+ {\r
+ at91sam7_info->target_name = "AT91SAM7XC512";\r
+ at91sam7_info->num_planes = 2;\r
+ if (at91sam7_info->num_planes != bank->num_sectors)\r
+ WARNING("Internal error: Number of flash planes and erase sectors does not match, please report");;\r
+ at91sam7_info->num_lockbits = 2*16;\r
+ at91sam7_info->pagesize = 256;\r
+ at91sam7_info->pages_in_lockregion = 64;\r
+ at91sam7_info->num_pages = 2*16*64;\r
+ }\r
+ if (bank->size==0x40000) /* AT91SAM7XC256 */\r
+ {\r
+ at91sam7_info->target_name = "AT91SAM7XC256";\r
+ at91sam7_info->num_lockbits = 16;\r
+ at91sam7_info->pagesize = 256;\r
+ at91sam7_info->pages_in_lockregion = 64;\r
+ at91sam7_info->num_pages = 16*64;\r
+ }\r
+ if (bank->size==0x20000) /* AT91SAM7XC128 */\r
+ {\r
+ at91sam7_info->target_name = "AT91SAM7XC128";\r
+ at91sam7_info->num_lockbits = 8;\r
+ at91sam7_info->pagesize = 256;\r
+ at91sam7_info->pages_in_lockregion = 64;\r
+ at91sam7_info->num_pages = 8*64;\r
+ }\r
+ \r
+ return ERROR_OK;\r
+ }\r
+ \r
+ if (at91sam7_info->cidr_arch == 0x72 )\r
+ {\r
+ at91sam7_info->num_nvmbits = 3;\r
+ at91sam7_info->nvmbits = (status>>8)&0x07;\r
+ bank->base = 0x100000;\r
+ bank->bus_width = 4;\r
+ if (bank->size==0x80000) /* AT91SAM7SE512 */\r
+ {\r
+ at91sam7_info->target_name = "AT91SAM7SE512";\r
+ at91sam7_info->num_planes = 2;\r
+ if (at91sam7_info->num_planes != bank->num_sectors)\r
+ WARNING("Internal error: Number of flash planes and erase sectors does not match, please report");;\r
+ at91sam7_info->num_lockbits = 32;\r
+ at91sam7_info->pagesize = 256;\r
+ at91sam7_info->pages_in_lockregion = 64;\r
+ at91sam7_info->num_pages = 32*64;\r
+ }\r
+ if (bank->size==0x40000)\r
+ {\r
+ at91sam7_info->target_name = "AT91SAM7SE256";\r
+ at91sam7_info->num_lockbits = 16;\r
+ at91sam7_info->pagesize = 256;\r
+ at91sam7_info->pages_in_lockregion = 64;\r
+ at91sam7_info->num_pages = 16*64;\r
+ }\r
+ if (bank->size==0x08000)\r
+ {\r
+ at91sam7_info->target_name = "AT91SAM7SE32";\r
+ at91sam7_info->num_lockbits = 8;\r
+ at91sam7_info->pagesize = 128;\r
+ at91sam7_info->pages_in_lockregion = 32;\r
+ at91sam7_info->num_pages = 8*32;\r
+ }\r
+ \r
+ return ERROR_OK;\r
+ }\r
+ \r
+ if (at91sam7_info->cidr_arch == 0x75 )\r
+ {\r
+ at91sam7_info->num_nvmbits = 3;\r
+ at91sam7_info->nvmbits = (status>>8)&0x07;\r
+ bank->base = 0x100000;\r
+ bank->bus_width = 4;\r
+ if (bank->size==0x80000) /* AT91SAM7X512 */\r
+ {\r
+ at91sam7_info->target_name = "AT91SAM7X512";\r
+ at91sam7_info->num_planes = 2;\r
+ if (at91sam7_info->num_planes != bank->num_sectors)\r
+ WARNING("Internal error: Number of flash planes and erase sectors does not match, please report");;\r
+ at91sam7_info->num_lockbits = 32;\r
+ at91sam7_info->pagesize = 256;\r
+ at91sam7_info->pages_in_lockregion = 64;\r
+ at91sam7_info->num_pages = 2*16*64;\r
+ DEBUG("Support for AT91SAM7X512 is experimental in this version!");\r
+ }\r
+ if (bank->size==0x40000) /* AT91SAM7X256 */\r
+ {\r
+ at91sam7_info->target_name = "AT91SAM7X256";\r
+ at91sam7_info->num_lockbits = 16;\r
+ at91sam7_info->pagesize = 256;\r
+ at91sam7_info->pages_in_lockregion = 64;\r
+ at91sam7_info->num_pages = 16*64;\r
+ }\r
+ if (bank->size==0x20000) /* AT91SAM7X128 */\r
+ {\r
+ at91sam7_info->target_name = "AT91SAM7X128";\r
+ at91sam7_info->num_lockbits = 8;\r
+ at91sam7_info->pagesize = 256;\r
+ at91sam7_info->pages_in_lockregion = 64;\r
+ at91sam7_info->num_pages = 8*64;\r
+ }\r
+ \r
+ return ERROR_OK;\r
+ }\r
+ \r
+ if (at91sam7_info->cidr_arch == 0x60 )\r
+ {\r
+ at91sam7_info->num_nvmbits = 3;\r
+ at91sam7_info->nvmbits = (status>>8)&0x07;\r
+ bank->base = 0x100000;\r
+ bank->bus_width = 4;\r
+ \r
+ if (bank->size == 0x40000) /* AT91SAM7A3 */\r
+ {\r
+ at91sam7_info->target_name = "AT91SAM7A3";\r
+ at91sam7_info->num_lockbits = 16;\r
+ at91sam7_info->pagesize = 256;\r
+ at91sam7_info->pages_in_lockregion = 16;\r
+ at91sam7_info->num_pages = 16*64;\r
+ }\r
+ return ERROR_OK;\r
+ }\r
+ \r
+ WARNING("at91sam7 flash only tested for AT91SAM7Sxx series");\r
+ \r
+ return ERROR_OK;\r
+}\r
+\r
+int at91sam7_erase_check(struct flash_bank_s *bank)\r
+{\r
+ at91sam7_flash_bank_t *at91sam7_info = bank->driver_priv;\r
+ \r
+ if (!at91sam7_info->working_area_size)\r
+ {\r
+ }\r
+ else\r
+ { \r
+ }\r
+ \r
+ return ERROR_OK;\r
+}\r
+\r
+int at91sam7_protect_check(struct flash_bank_s *bank)\r
+{\r
+ u32 status;\r
+ int flashplane;\r
+ \r
+ at91sam7_flash_bank_t *at91sam7_info = bank->driver_priv;\r
+\r
+ if (at91sam7_info->cidr == 0)\r
+ {\r
+ at91sam7_read_part_info(bank);\r
+ }\r
+\r
+ if (at91sam7_info->cidr == 0)\r
+ {\r
+ WARNING("Cannot identify target as an AT91SAM");\r
+ return ERROR_FLASH_OPERATION_FAILED;\r
+ }\r
+\r
+ for (flashplane=0;flashplane<at91sam7_info->num_planes;flashplane++)\r
+ {\r
+ status = at91sam7_get_flash_status(bank, flashplane);\r
+ at91sam7_info->lockbits[flashplane] = (status >> 16);\r
+ }\r
+ \r
+ return ERROR_OK;\r
+}\r
+\r
+/* flash_bank at91sam7 0 0 0 0 <target#>\r
+ */\r
+int at91sam7_flash_bank_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc, struct flash_bank_s *bank)\r
+{\r
+ at91sam7_flash_bank_t *at91sam7_info;\r
+ int i;\r
+ \r
+ if (argc < 6)\r
+ {\r
+ WARNING("incomplete flash_bank at91sam7 configuration");\r
+ return ERROR_FLASH_BANK_INVALID;\r
+ }\r
+ \r
+ at91sam7_info = malloc(sizeof(at91sam7_flash_bank_t));\r
+ bank->driver_priv = at91sam7_info;\r
+ at91sam7_info->probed = 0;\r
+ \r
+ /* part wasn't probed for info yet */\r
+ at91sam7_info->cidr = 0;\r
+ for (i=0;i<4;i++)\r
+ at91sam7_info->flashmode[i]=0;\r
+ \r
+ return ERROR_OK;\r
+}\r
+\r
+int at91sam7_erase(struct flash_bank_s *bank, int first, int last)\r
+{\r
+ at91sam7_flash_bank_t *at91sam7_info = bank->driver_priv;\r
+ u8 flashplane;\r
+\r
+ if (bank->target->state != TARGET_HALTED)\r
+ {\r
+ return ERROR_TARGET_NOT_HALTED;\r
+ }\r
+ \r
+ if (at91sam7_info->cidr == 0)\r
+ {\r
+ at91sam7_read_part_info(bank);\r
+ }\r
+\r
+ if (at91sam7_info->cidr == 0)\r
+ {\r
+ WARNING("Cannot identify target as an AT91SAM");\r
+ return ERROR_FLASH_OPERATION_FAILED;\r
+ } \r
+ \r
+ if ((first < 0) || (last < first) || (last >= bank->num_sectors))\r
+ {\r
+ if ((first == 0) && (last == (at91sam7_info->num_lockbits-1)))\r
+ {\r
+ WARNING("Sector numbers based on lockbit count, probably a deprecated script");\r
+ last = bank->num_sectors-1;\r
+ }\r
+ else return ERROR_FLASH_SECTOR_INVALID;\r
+ }\r
+\r
+ /* Configure the flash controller timing */\r
+ at91sam7_read_clock_info(bank); \r
+ for (flashplane = first; flashplane<=last; flashplane++)\r
+ {\r
+ /* Configure the flash controller timing */\r
+ at91sam7_set_flash_mode(bank, flashplane, FMR_TIMING_FLASH);\r
+ if (at91sam7_flash_command(bank, flashplane, EA, 0) != ERROR_OK) \r
+ {\r
+ return ERROR_FLASH_OPERATION_FAILED;\r
+ } \r
+ }\r
+ return ERROR_OK;\r
+\r
+}\r
+\r
+int at91sam7_protect(struct flash_bank_s *bank, int set, int first, int last)\r
+{\r
+ u32 cmd, pagen;\r
+ u8 flashplane;\r
+ int lockregion;\r
+ \r
+ at91sam7_flash_bank_t *at91sam7_info = bank->driver_priv;\r
+ \r
+ if (bank->target->state != TARGET_HALTED)\r
+ {\r
+ return ERROR_TARGET_NOT_HALTED;\r
+ }\r
+ \r
+ if ((first < 0) || (last < first) || (last >= at91sam7_info->num_lockbits))\r
+ {\r
+ return ERROR_FLASH_SECTOR_INVALID;\r
+ }\r
+ \r
+ if (at91sam7_info->cidr == 0)\r
+ {\r
+ at91sam7_read_part_info(bank);\r
+ }\r
+\r
+ if (at91sam7_info->cidr == 0)\r
+ {\r
+ WARNING("Cannot identify target as an AT91SAM");\r
+ return ERROR_FLASH_OPERATION_FAILED;\r
+ }\r
+ \r
+ at91sam7_read_clock_info(bank); \r
+ \r
+ for (lockregion=first;lockregion<=last;lockregion++) \r
+ {\r
+ pagen = lockregion*at91sam7_info->pages_in_lockregion;\r
+ flashplane = (pagen>>10)&0x03;\r
+ /* Configure the flash controller timing */\r
+ at91sam7_set_flash_mode(bank, flashplane, FMR_TIMING_NVBITS);\r
+ \r
+ if (set)\r
+ cmd = SLB; \r
+ else\r
+ cmd = CLB; \r
+\r
+ if (at91sam7_flash_command(bank, flashplane, cmd, pagen) != ERROR_OK) \r
+ {\r
+ return ERROR_FLASH_OPERATION_FAILED;\r
+ } \r
+ }\r
+ \r
+ at91sam7_protect_check(bank);\r
+ \r
+ return ERROR_OK;\r
+}\r
+\r
+\r
+int at91sam7_write(struct flash_bank_s *bank, u8 *buffer, u32 offset, u32 count)\r
+{\r
+ at91sam7_flash_bank_t *at91sam7_info = bank->driver_priv;\r
+ target_t *target = bank->target;\r
+ u32 dst_min_alignment, wcount, bytes_remaining = count;\r
+ u32 first_page, last_page, pagen, buffer_pos;\r
+ u8 flashplane;\r
+ \r
+ if (at91sam7_info->cidr == 0)\r
+ {\r
+ at91sam7_read_part_info(bank);\r
+ }\r
+\r
+ if (at91sam7_info->cidr == 0)\r
+ {\r
+ WARNING("Cannot identify target as an AT91SAM");\r
+ return ERROR_FLASH_OPERATION_FAILED;\r
+ }\r
+ \r
+ if (offset + count > bank->size)\r
+ return ERROR_FLASH_DST_OUT_OF_BANK;\r
+ \r
+ dst_min_alignment = at91sam7_info->pagesize;\r
+\r
+ if (offset % dst_min_alignment)\r
+ {\r
+ WARNING("offset 0x%x breaks required alignment 0x%x", offset, dst_min_alignment);\r
+ return ERROR_FLASH_DST_BREAKS_ALIGNMENT;\r
+ }\r
+ \r
+ if (at91sam7_info->cidr_arch == 0)\r
+ return ERROR_FLASH_BANK_NOT_PROBED;\r
+\r
+ first_page = offset/dst_min_alignment;\r
+ last_page = CEIL(offset + count, dst_min_alignment);\r
+ \r
+ DEBUG("first_page: %i, last_page: %i, count %i", first_page, last_page, count);\r
+ \r
+ at91sam7_read_clock_info(bank); \r
+\r
+ for (pagen=first_page; pagen<last_page; pagen++) \r
+ {\r
+ if (bytes_remaining<dst_min_alignment)\r
+ count = bytes_remaining;\r
+ else\r
+ count = dst_min_alignment;\r
+ bytes_remaining -= count;\r
+ \r
+ /* Write one block to the PageWriteBuffer */\r
+ buffer_pos = (pagen-first_page)*dst_min_alignment;\r
+ wcount = CEIL(count,4);\r
+ target->type->write_memory(target, bank->base+pagen*dst_min_alignment, 4, wcount, buffer+buffer_pos);\r
+ flashplane = (pagen>>10)&0x3;\r
+ \r
+ /* Configure the flash controller timing */ \r
+ at91sam7_set_flash_mode(bank, flashplane, FMR_TIMING_FLASH);\r
+ /* Send Write Page command to Flash Controller */\r
+ if (at91sam7_flash_command(bank, flashplane, WP, pagen) != ERROR_OK) \r
+ {\r
+ return ERROR_FLASH_OPERATION_FAILED;\r
+ }\r
+ DEBUG("Write flash plane:%i page number:%i", flashplane, pagen);\r
+ }\r
+ \r
+ return ERROR_OK;\r
+}\r
+\r
+\r
+int at91sam7_probe(struct flash_bank_s *bank)\r
+{\r
+ /* we can't probe on an at91sam7\r
+ * if this is an at91sam7, it has the configured flash\r
+ */\r
+ at91sam7_flash_bank_t *at91sam7_info = bank->driver_priv;\r
+ at91sam7_info->probed = 0;\r
+ \r
+ if (at91sam7_info->cidr == 0)\r
+ {\r
+ at91sam7_read_part_info(bank);\r
+ }\r
+\r
+ if (at91sam7_info->cidr == 0)\r
+ {\r
+ WARNING("Cannot identify target as an AT91SAM");\r
+ return ERROR_FLASH_OPERATION_FAILED;\r
+ }\r
+ \r
+ at91sam7_info->probed = 1;\r
+ \r
+ return ERROR_OK;\r
+}\r
+\r
+\r
+int at91sam7_auto_probe(struct flash_bank_s *bank)\r
+{\r
+ at91sam7_flash_bank_t *at91sam7_info = bank->driver_priv;\r
+ if (at91sam7_info->probed)\r
+ return ERROR_OK;\r
+ return at91sam7_probe(bank);\r
+}\r
+\r
+int at91sam7_info(struct flash_bank_s *bank, char *buf, int buf_size)\r
+{\r
+ int printed, flashplane;\r
+ at91sam7_flash_bank_t *at91sam7_info = bank->driver_priv;\r
+ \r
+ at91sam7_read_part_info(bank);\r
+\r
+ if (at91sam7_info->cidr == 0)\r
+ {\r
+ printed = snprintf(buf, buf_size, "Cannot identify target as an AT91SAM\n");\r
+ buf += printed;\r
+ buf_size -= printed;\r
+ return ERROR_FLASH_OPERATION_FAILED;\r
+ }\r
+ \r
+ printed = snprintf(buf, buf_size, "\nat91sam7 information: Chip is %s\n",at91sam7_info->target_name);\r
+ buf += printed;\r
+ buf_size -= printed;\r
+ \r
+ printed = snprintf(buf, buf_size, "cidr: 0x%8.8x, arch: 0x%4.4x, eproc: %s, version:0x%3.3x, flashsize: 0x%8.8x\n",\r
+ at91sam7_info->cidr, at91sam7_info->cidr_arch, EPROC[at91sam7_info->cidr_eproc], at91sam7_info->cidr_version, bank->size);\r
+ buf += printed;\r
+ buf_size -= printed;\r
+ \r
+ printed = snprintf(buf, buf_size, "master clock(estimated): %ikHz \n", at91sam7_info->mck_freq / 1000);\r
+ buf += printed;\r
+ buf_size -= printed;\r
+ \r
+ if (at91sam7_info->num_planes>1) { \r
+ printed = snprintf(buf, buf_size, "flashplanes: %i, pagesize: %i, lock regions: %i, pages in lock region: %i \n", \r
+ at91sam7_info->num_planes, at91sam7_info->pagesize, at91sam7_info->num_lockbits, at91sam7_info->num_pages/at91sam7_info->num_lockbits);\r
+ buf += printed;\r
+ buf_size -= printed;\r
+ for (flashplane=0; flashplane<at91sam7_info->num_planes; flashplane++)\r
+ {\r
+ printed = snprintf(buf, buf_size, "lockbits[%i]: 0x%4.4x, ", flashplane, at91sam7_info->lockbits[flashplane]);\r
+ buf += printed;\r
+ buf_size -= printed;\r
+ }\r
+ }\r
+ else\r
+ if (at91sam7_info->num_lockbits>0) { \r
+ printed = snprintf(buf, buf_size, "pagesize: %i, lockbits: %i 0x%4.4x, pages in lock region: %i \n", \r
+ at91sam7_info->pagesize, at91sam7_info->num_lockbits, at91sam7_info->lockbits[0], at91sam7_info->num_pages/at91sam7_info->num_lockbits);\r
+ buf += printed;\r
+ buf_size -= printed;\r
+ }\r
+ \r
+ printed = snprintf(buf, buf_size, "securitybit: %i, nvmbits: 0x%1.1x\n", at91sam7_info->securitybit, at91sam7_info->nvmbits);\r
+ buf += printed;\r
+ buf_size -= printed;\r
+\r
+ return ERROR_OK;\r
+}\r
+\r
+/* \r
+* On AT91SAM7S: When the gpnvm bits are set with \r
+* > at91sam7 gpnvm 0 bitnr set\r
+* the changes are not visible in the flash controller status register MC_FSR \r
+* until the processor has been reset.\r
+* On the Olimex board this requires a power cycle.\r
+* Note that the AT91SAM7S has the following errata (doc6175.pdf sec 14.1.3):\r
+* The maximum number of write/erase cycles for Non Volatile Memory bits is 100. This includes\r
+* Lock Bits (LOCKx), General Purpose NVM bits (GPNVMx) and the Security Bit.\r
+*/\r
+int at91sam7_handle_gpnvm_command(struct command_context_s *cmd_ctx, char *cmd, char **args, int argc)\r
+{\r
+ flash_bank_t *bank;\r
+ int bit;\r
+ u8 flashcmd;\r
+ u32 status;\r
+ char *value;\r
+ at91sam7_flash_bank_t *at91sam7_info;\r
+\r
+ if (argc < 3)\r
+ {\r
+ command_print(cmd_ctx, "at91sam7 gpnvm <num> <bit> <set|clear>");\r
+ return ERROR_OK;\r
+ }\r
+ \r
+ bank = get_flash_bank_by_num(strtoul(args[0], NULL, 0));\r
+ bit = atoi(args[1]);\r
+ value = args[2];\r
+\r
+ if (!bank)\r
+ {\r
+ command_print(cmd_ctx, "flash bank '#%s' is out of bounds", args[0]);\r
+ return ERROR_OK;\r
+ }\r
+\r
+ at91sam7_info = bank->driver_priv;\r
+\r
+ if (bank->target->state != TARGET_HALTED)\r
+ {\r
+ return ERROR_TARGET_NOT_HALTED;\r
+ }\r
+ \r
+ if (at91sam7_info->cidr == 0)\r
+ {\r
+ at91sam7_read_part_info(bank);\r
+ }\r
+\r
+ if (at91sam7_info->cidr == 0)\r
+ {\r
+ WARNING("Cannot identify target as an AT91SAM");\r
+ return ERROR_FLASH_OPERATION_FAILED;\r
+ }\r
+\r
+ if ((bit<0) || (at91sam7_info->num_nvmbits <= bit))\r
+ { \r
+ command_print(cmd_ctx, "gpnvm bit '#%s' is out of bounds for target %s", args[1],at91sam7_info->target_name);\r
+ return ERROR_OK;\r
+ }\r
+\r
+ if (strcmp(value, "set") == 0)\r
+ {\r
+ flashcmd = SGPB;\r
+ }\r
+ else if (strcmp(value, "clear") == 0)\r
+ {\r
+ flashcmd = CGPB;\r
+ }\r
+ else\r
+ {\r
+ command_print(cmd_ctx, "usage: at91sam7 gpnvm <num> <bit> <set|clear>");\r
+ return ERROR_OK;\r
+ }\r
+\r
+ /* Configure the flash controller timing */\r
+ at91sam7_read_clock_info(bank); \r
+ at91sam7_set_flash_mode(bank, 0, FMR_TIMING_NVBITS);\r
+ \r
+ if (at91sam7_flash_command(bank, 0, flashcmd, (u16)(bit)) != ERROR_OK) \r
+ {\r
+ return ERROR_FLASH_OPERATION_FAILED;\r
+ } \r
+\r
+ status = at91sam7_get_flash_status(bank, 0);\r
+ DEBUG("at91sam7_handle_gpnvm_command: cmd 0x%x, value 0x%x, status 0x%x \n",flashcmd,bit,status);\r
+ at91sam7_info->nvmbits = (status>>8)&((1<<at91sam7_info->num_nvmbits)-1);\r
+\r
+ return ERROR_OK;\r
+}\r
projects / fw / openocd / blobdiff