ADIv5 DAP ops switching to JTAG or SWD modes

[fw/openocd] / src / ecosboard.c

diff --git a/src/ecosboard.c b/src/ecosboard.c
index d7fdabdb4d348d1d77d9f6761c8ce94897adc397..f7523545a10e2676308b638b2f05043ba6669a75 100644 (file)
--- a/src/ecosboard.c
+++ b/src/ecosboard.c
@@ -847,7 +847,7 @@ static int zylinjtag_Jim_Command_uart(Jim_Interp *interp, int argc,
        static int current_baud = 38400;
        if (argc == 1)
        {
-               command_print(cmd_ctx, "%d", current_baud);
+               Jim_SetResult(interp, Jim_NewIntObj(interp, current_baud));
                return JIM_OK;
        }
        else if (argc != 2)
@@ -883,8 +883,8 @@ static int zylinjtag_Jim_Command_uart(Jim_Interp *interp, int argc,
                baud = CYGNUM_SERIAL_BAUD_230400;
                break;
        default:
-               command_print(cmd_ctx, "unsupported baudrate");
-               return ERROR_INVALID_ARGUMENTS;
+               Jim_SetResult(interp, Jim_NewStringObj(interp, "unsupported baudrate", -1));
+               return JIM_ERR;
        }
 
        cyg_serial_info_t buf;
@@ -897,7 +897,7 @@ static int zylinjtag_Jim_Command_uart(Jim_Interp *interp, int argc,
        err = cyg_io_lookup(ZY1000_SER_DEV, &serial_handle);
        if (err != ENOERR)
        {
-               LOG_ERROR("Could not open serial port\n");
+               Jim_SetResult(interp, Jim_NewStringObj(interp, "Could not open serial port", -1));
                return JIM_ERR;
        }
 
@@ -907,7 +907,7 @@ static int zylinjtag_Jim_Command_uart(Jim_Interp *interp, int argc,
                        &len);
        if (err != ENOERR)
        {
-               LOG_ERROR("Failed to get serial port settings %d", err);
+               Jim_SetResult(interp, Jim_NewStringObj(interp, "Failed to get serial port settings", -1));
                return JIM_ERR;
        }
        buf.baud = baud;
@@ -916,7 +916,7 @@ static int zylinjtag_Jim_Command_uart(Jim_Interp *interp, int argc,
                        &len);
        if (err != ENOERR)
        {
-               LOG_ERROR("Failed to set serial port settings %d", err);
+               Jim_SetResult(interp, Jim_NewStringObj(interp, "Failed to set serial port settings", -1));
                return JIM_ERR;
        }
 
@@ -956,7 +956,11 @@ int main(int argc, char *argv[])
 
        diag_init_putc(_zylinjtag_diag_write_char);
        // We want this in the log.
-       diag_printf("Zylin ZY1000.\n");
+#ifdef CYGPKG_HAL_NIOS2
+       diag_printf("Zylin ZY1000 PCB revc.\n");
+#else
+       diag_printf("Zylin ZY1000 PCB revb.\n");
+#endif
 
        err = mount("", "/ram", "ramfs");
        if (err < 0)
@@ -995,6 +999,20 @@ int main(int argc, char *argv[])
 
        copydir("/rom", "/ram/cgi");
 
+#ifdef CYGPKG_HAL_NIOS2
+       cyg_flashaddr_t err_address;
+#define UNCACHED_EXT_FLASH_BASE (0x80000000 + EXT_FLASH_BASE)
+       /* The revc flash is locked upon reset, unlock it */
+#ifdef CYGHWR_IO_FLASH_BLOCK_LOCKING
+       if ((err = flash_unlock((void *) UNCACHED_EXT_FLASH_BASE, EXT_FLASH_SPAN,
+                       (void **) &err_address)) != 0)
+       {
+               diag_printf("Error: could not unlock flash\n");
+       }
+#endif
+#endif
+
+
        err = mount("/dev/flash1", "/config", "jffs2");
        if (err < 0)
        {
@@ -1083,7 +1101,7 @@ int main(int argc, char *argv[])
                        NULL, NULL);
 #endif
 
-       Jim_CreateCommand(httpstate.jim_interp, "uart", zylinjtag_Jim_Command_uart, NULL, NULL);
+       Jim_CreateCommand(httpstate.jim_interp, "zy1000_uart", zylinjtag_Jim_Command_uart, NULL, NULL);
 
 
        log_init();