Merge branch 'master' into squeeze
[debian/amanda] / restore-src / Makefile.in
diff --git a/restore-src/Makefile.in b/restore-src/Makefile.in
deleted file mode 100644 (file)
index ec0c803..0000000
+++ /dev/null
@@ -1,1329 +0,0 @@
-# Makefile.in generated by automake 1.11 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
-# Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-# Makefile for Amanda restore programs.
-
-# vim:ft=automake
-# Copyright (c) 2005-2008 Zmanda Inc.  All Rights Reserved.
-# 
-# This library is free software; you can redistribute it and/or modify it
-# under the terms of the GNU Lesser General Public License version 2.1 as 
-# published by the Free Software Foundation.
-# 
-# This library is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
-# or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU Lesser General Public
-# License for more details.
-# 
-# You should have received a copy of the GNU Lesser General Public License
-# along with this library; if not, write to the Free Software Foundation,
-# Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA.
-# 
-# Contact information: Zmanda Inc., 465 S Mathlida Ave, Suite 300
-# Sunnyvale, CA 94086, USA, or: http://www.zmanda.com
-
-# simple include file to pre-define variables which are then +='d by other
-# scripts in this directory.
-
-# vim:ft=automake
-#
-# Adjust post-install permissions settings.  This rule works off two
-# specially-formatted variables, INSTALLPERMS_exec and INSTALLPERMS_data. 
-# Each is a whitespace-separated list of commands, all of which are either
-# a variable assignment or a filename.  Three variables are available:
-#
-#  - dest= sets the destination directory to e.g., $(sbindir)
-#  - chown= controls changes in ownership; value is first argument to chown
-#  - chmod= controls changes in permissions; value is first argument to chmod
-#
-# As a special case, chown=amanda is taken as equivalent to 
-# chown=$(BINARY_OWNER):$(SETUID_GROUP), which may otherwise have problems with
-# whitespace in the user/group names.
-# 
-# when a filename is seen, the currently active variables are applied.
-#
-# Note that scripts are data, not executables!
-#
-# EXAMPLE
-#
-# sbin_PROGRAMS = foo bar bing
-# libexec_PROGRAMS = pro gram
-# sbin_SCRIPTS = sk ript
-# INSTALLPERMS_exec = \
-#      dest=$(sbindir) chown=amanda chmod= \
-#              foo bar \
-#      chmod=07450 \
-#              bing
-#      dest=$(libexecdir) chmod= \
-#              $(libexec_PROGRAMS)
-# INSTALLPERMS_data = \
-#      dest=$(sbindir) chown=amanda chmod= \
-#              $(sbin_SCRIPTS)
-#
-# This whole operation is not required when making builds for packaging,
-# and can be disabled with --disable-installperms, via the WANT_INSTALLPERMS
-# AM_CONDITIONAL.  When disabled, the file 'installperms.sh' in the top-level
-# build directory is populated with a format suitable for shell interpretation,
-# with lines like this:
-#   installperm "amanda:disk" "04750" "/usr/local/sbin/bing"
-# the arguments being, respectively, owner:group, mode, and filename.  There will
-# be exactly one line for each file which has specific permissions.  The intention
-# is that this file be used by packaging scripts to set correct permissions at install
-# time.  Note that files which have no special permissions requirements do not appear 
-# in this file at all, due to limitations of Automake.
-
-# vim:ft=automake
-
-
-
-VPATH = @srcdir@
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = @build@
-host_triplet = @host@
-target_triplet = @target@
-DIST_COMMON = $(noinst_HEADERS) $(srcdir)/Makefile.am \
-       $(srcdir)/Makefile.in \
-       $(top_srcdir)/config/automake/installperms.am \
-       $(top_srcdir)/config/automake/precompile.am \
-       $(top_srcdir)/config/automake/vars.am
-@WANT_INSTALLPERMS_FALSE@am__append_1 = $(installperms_sh)
-sbin_PROGRAMS = amrestore$(EXEEXT) amfetchdump$(EXEEXT)
-amlibexec_PROGRAMS = amidxtaped$(EXEEXT)
-subdir = restore-src
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps =  \
-       $(top_srcdir)/config/macro-archive/ac_define_dir.m4 \
-       $(top_srcdir)/config/macro-archive/ac_perl_module_version.m4 \
-       $(top_srcdir)/config/macro-archive/ac_prog_perl_version.m4 \
-       $(top_srcdir)/config/macro-archive/ac_prog_swig.m4 \
-       $(top_srcdir)/config/macro-archive/ax_compare_version.m4 \
-       $(top_srcdir)/config/macro-archive/docbook-dtd.m4 \
-       $(top_srcdir)/config/macro-archive/docbook-xslt-min.m4 \
-       $(top_srcdir)/config/macro-archive/docbook-xslt.m4 \
-       $(top_srcdir)/config/macro-archive/xsltproc.m4 \
-       $(top_srcdir)/config/amanda/amplot.m4 \
-       $(top_srcdir)/config/amanda/bsd-security.m4 \
-       $(top_srcdir)/config/amanda/bsdtcp-security.m4 \
-       $(top_srcdir)/config/amanda/bsdudp-security.m4 \
-       $(top_srcdir)/config/amanda/changer.m4 \
-       $(top_srcdir)/config/amanda/components.m4 \
-       $(top_srcdir)/config/amanda/compress.m4 \
-       $(top_srcdir)/config/amanda/config.m4 \
-       $(top_srcdir)/config/amanda/debugging.m4 \
-       $(top_srcdir)/config/amanda/defaults.m4 \
-       $(top_srcdir)/config/amanda/devprefix.m4 \
-       $(top_srcdir)/config/amanda/dirs.m4 \
-       $(top_srcdir)/config/amanda/documentation.m4 \
-       $(top_srcdir)/config/amanda/dumpers.m4 \
-       $(top_srcdir)/config/amanda/flags.m4 \
-       $(top_srcdir)/config/amanda/flock.m4 \
-       $(top_srcdir)/config/amanda/funcs.m4 \
-       $(top_srcdir)/config/amanda/getfsent.m4 \
-       $(top_srcdir)/config/amanda/i18n.m4 \
-       $(top_srcdir)/config/amanda/ipv6.m4 \
-       $(top_srcdir)/config/amanda/krb4-security.m4 \
-       $(top_srcdir)/config/amanda/krb5-security.m4 \
-       $(top_srcdir)/config/amanda/lfs.m4 \
-       $(top_srcdir)/config/amanda/libs.m4 \
-       $(top_srcdir)/config/amanda/net.m4 \
-       $(top_srcdir)/config/amanda/progs.m4 \
-       $(top_srcdir)/config/amanda/ps.m4 \
-       $(top_srcdir)/config/amanda/readdir.m4 \
-       $(top_srcdir)/config/amanda/readline.m4 \
-       $(top_srcdir)/config/amanda/rsh-security.m4 \
-       $(top_srcdir)/config/amanda/s3-device.m4 \
-       $(top_srcdir)/config/amanda/shmem.m4 \
-       $(top_srcdir)/config/amanda/socklen_t_equiv.m4 \
-       $(top_srcdir)/config/amanda/ssh-security.m4 \
-       $(top_srcdir)/config/amanda/summary.m4 \
-       $(top_srcdir)/config/amanda/swig.m4 \
-       $(top_srcdir)/config/amanda/syshacks.m4 \
-       $(top_srcdir)/config/amanda/tape.m4 \
-       $(top_srcdir)/config/amanda/types.m4 \
-       $(top_srcdir)/config/amanda/userid.m4 \
-       $(top_srcdir)/config/amanda/version.m4 \
-       $(top_srcdir)/config/gnulib/alloca.m4 \
-       $(top_srcdir)/config/gnulib/arpa_inet_h.m4 \
-       $(top_srcdir)/config/gnulib/base64.m4 \
-       $(top_srcdir)/config/gnulib/eoverflow.m4 \
-       $(top_srcdir)/config/gnulib/extensions.m4 \
-       $(top_srcdir)/config/gnulib/float_h.m4 \
-       $(top_srcdir)/config/gnulib/fsusage.m4 \
-       $(top_srcdir)/config/gnulib/getaddrinfo.m4 \
-       $(top_srcdir)/config/gnulib/getopt.m4 \
-       $(top_srcdir)/config/gnulib/gettimeofday.m4 \
-       $(top_srcdir)/config/gnulib/gnulib-common.m4 \
-       $(top_srcdir)/config/gnulib/gnulib-comp.m4 \
-       $(top_srcdir)/config/gnulib/include_next.m4 \
-       $(top_srcdir)/config/gnulib/inet_ntop.m4 \
-       $(top_srcdir)/config/gnulib/intmax_t.m4 \
-       $(top_srcdir)/config/gnulib/lock.m4 \
-       $(top_srcdir)/config/gnulib/longlong.m4 \
-       $(top_srcdir)/config/gnulib/malloc.m4 \
-       $(top_srcdir)/config/gnulib/mkdtemp.m4 \
-       $(top_srcdir)/config/gnulib/netinet_in_h.m4 \
-       $(top_srcdir)/config/gnulib/onceonly_2_57.m4 \
-       $(top_srcdir)/config/gnulib/physmem.m4 \
-       $(top_srcdir)/config/gnulib/safe-read.m4 \
-       $(top_srcdir)/config/gnulib/safe-write.m4 \
-       $(top_srcdir)/config/gnulib/snprintf.m4 \
-       $(top_srcdir)/config/gnulib/socklen.m4 \
-       $(top_srcdir)/config/gnulib/sockpfaf.m4 \
-       $(top_srcdir)/config/gnulib/ssize_t.m4 \
-       $(top_srcdir)/config/gnulib/stdbool.m4 \
-       $(top_srcdir)/config/gnulib/stdint.m4 \
-       $(top_srcdir)/config/gnulib/stdio_h.m4 \
-       $(top_srcdir)/config/gnulib/stdlib_h.m4 \
-       $(top_srcdir)/config/gnulib/strdup.m4 \
-       $(top_srcdir)/config/gnulib/string_h.m4 \
-       $(top_srcdir)/config/gnulib/sys_socket_h.m4 \
-       $(top_srcdir)/config/gnulib/sys_stat_h.m4 \
-       $(top_srcdir)/config/gnulib/sys_time_h.m4 \
-       $(top_srcdir)/config/gnulib/tempname.m4 \
-       $(top_srcdir)/config/gnulib/unistd_h.m4 \
-       $(top_srcdir)/config/gnulib/vasnprintf.m4 \
-       $(top_srcdir)/config/gnulib/visibility.m4 \
-       $(top_srcdir)/config/gnulib/wchar.m4 \
-       $(top_srcdir)/config/gettext-macros/gettext.m4 \
-       $(top_srcdir)/config/gettext-macros/iconv.m4 \
-       $(top_srcdir)/config/gettext-macros/inttypes_h.m4 \
-       $(top_srcdir)/config/gettext-macros/lib-ld.m4 \
-       $(top_srcdir)/config/gettext-macros/lib-link.m4 \
-       $(top_srcdir)/config/gettext-macros/lib-prefix.m4 \
-       $(top_srcdir)/config/gettext-macros/nls.m4 \
-       $(top_srcdir)/config/gettext-macros/po.m4 \
-       $(top_srcdir)/config/gettext-macros/progtest.m4 \
-       $(top_srcdir)/config/gettext-macros/size_max.m4 \
-       $(top_srcdir)/config/gettext-macros/stdint_h.m4 \
-       $(top_srcdir)/config/gettext-macros/wchar_t.m4 \
-       $(top_srcdir)/config/gettext-macros/wint_t.m4 \
-       $(top_srcdir)/config/gettext-macros/xsize.m4 \
-       $(top_srcdir)/config/libtool.m4 $(top_srcdir)/configure.in
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
-       $(ACLOCAL_M4)
-mkinstalldirs = $(SHELL) $(top_srcdir)/config/mkinstalldirs
-CONFIG_HEADER = $(top_builddir)/config/config.h
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
-    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
-    *) f=$$p;; \
-  esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
-  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
-  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
-  for p in $$list; do echo "$$p $$p"; done | \
-  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
-  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
-    if (++n[$$2] == $(am__install_max)) \
-      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
-    END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
-  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
-  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__installdirs = "$(DESTDIR)$(amlibdir)" "$(DESTDIR)$(amlibexecdir)" \
-       "$(DESTDIR)$(sbindir)"
-LTLIBRARIES = $(amlib_LTLIBRARIES)
-librestore_la_DEPENDENCIES = ../common-src/libamanda.$(LIB_EXTENSION) \
-       ../server-src/libamserver.$(LIB_EXTENSION) \
-       ../device-src/libamdevice.$(LIB_EXTENSION)
-am_librestore_la_OBJECTS = restore.lo
-librestore_la_OBJECTS = $(am_librestore_la_OBJECTS)
-librestore_la_LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) \
-       $(LIBTOOLFLAGS) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
-       $(librestore_la_LDFLAGS) $(LDFLAGS) -o $@
-PROGRAMS = $(amlibexec_PROGRAMS) $(sbin_PROGRAMS)
-am_amfetchdump_OBJECTS = amfetchdump.$(OBJEXT)
-amfetchdump_OBJECTS = $(am_amfetchdump_OBJECTS)
-amfetchdump_LDADD = $(LDADD)
-am__DEPENDENCIES_1 =
-amfetchdump_DEPENDENCIES = librestore.$(LIB_EXTENSION) \
-       ../common-src/libamanda.$(LIB_EXTENSION) $(am__DEPENDENCIES_1)
-am_amidxtaped_OBJECTS = amidxtaped.$(OBJEXT)
-amidxtaped_OBJECTS = $(am_amidxtaped_OBJECTS)
-am__DEPENDENCIES_2 = librestore.$(LIB_EXTENSION) \
-       ../common-src/libamanda.$(LIB_EXTENSION) $(am__DEPENDENCIES_1)
-amidxtaped_DEPENDENCIES = $(am__DEPENDENCIES_2) \
-       ../gnulib/libgnu.$(LIB_EXTENSION) \
-       ../amandad-src/libamandad.$(LIB_EXTENSION)
-amrestore_SOURCES = amrestore.c
-amrestore_OBJECTS = amrestore.$(OBJEXT)
-amrestore_LDADD = $(LDADD)
-amrestore_DEPENDENCIES = librestore.$(LIB_EXTENSION) \
-       ../common-src/libamanda.$(LIB_EXTENSION) $(am__DEPENDENCIES_1)
-DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)/config
-depcomp = $(SHELL) $(top_srcdir)/config/depcomp
-am__depfiles_maybe = depfiles
-am__mv = mv -f
-COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
-       $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
-       --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
-       $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
-       --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
-       $(LDFLAGS) -o $@
-SOURCES = $(librestore_la_SOURCES) $(amfetchdump_SOURCES) \
-       $(amidxtaped_SOURCES) amrestore.c
-DIST_SOURCES = $(librestore_la_SOURCES) $(amfetchdump_SOURCES) \
-       $(amidxtaped_SOURCES) amrestore.c
-HEADERS = $(noinst_HEADERS)
-ETAGS = etags
-CTAGS = ctags
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-AIX_BACKUP = @AIX_BACKUP@
-ALLOCA = @ALLOCA@
-ALLOCA_H = @ALLOCA_H@
-AMANDA_DBGDIR = @AMANDA_DBGDIR@
-AMANDA_DEBUG_DAYS = @AMANDA_DEBUG_DAYS@
-AMANDA_STATIC_LDFLAGS = @AMANDA_STATIC_LDFLAGS@
-AMANDA_TMPDIR = @AMANDA_TMPDIR@
-AMANDA_WARNING_CFLAGS = @AMANDA_WARNING_CFLAGS@
-AMLINT = @AMLINT@
-AMLINTFLAGS = @AMLINTFLAGS@
-AMPLOT_CAT_COMPRESS = @AMPLOT_CAT_COMPRESS@
-AMPLOT_CAT_GZIP = @AMPLOT_CAT_GZIP@
-AMPLOT_CAT_PACK = @AMPLOT_CAT_PACK@
-AMPLOT_COMPRESS = @AMPLOT_COMPRESS@
-AMTAR = @AMTAR@
-APPLICATION_DIR = @APPLICATION_DIR@
-AR = @AR@
-ARPA_INET_H = @ARPA_INET_H@
-ASSERTIONS = @ASSERTIONS@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-BASH = @BASH@
-BINARY_OWNER = @BINARY_OWNER@
-BITSIZEOF_PTRDIFF_T = @BITSIZEOF_PTRDIFF_T@
-BITSIZEOF_SIG_ATOMIC_T = @BITSIZEOF_SIG_ATOMIC_T@
-BITSIZEOF_SIZE_T = @BITSIZEOF_SIZE_T@
-BITSIZEOF_WCHAR_T = @BITSIZEOF_WCHAR_T@
-BITSIZEOF_WINT_T = @BITSIZEOF_WINT_T@
-BSDTCP_SECURITY = @BSDTCP_SECURITY@
-BSDUDP_SECURITY = @BSDUDP_SECURITY@
-BSD_SECURITY = @BSD_SECURITY@
-CAT = @CAT@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CFLAG_VISIBILITY = @CFLAG_VISIBILITY@
-CHECK_USERID = @CHECK_USERID@
-CHIO = @CHIO@
-CHS = @CHS@
-CLIENT_HOST_INSTANCE = @CLIENT_HOST_INSTANCE@
-CLIENT_HOST_KEY_FILE = @CLIENT_HOST_KEY_FILE@
-CLIENT_HOST_PRINCIPAL = @CLIENT_HOST_PRINCIPAL@
-CLIENT_LOGIN = @CLIENT_LOGIN@
-CLIENT_SCRIPTS_OPT = @CLIENT_SCRIPTS_OPT@
-COMPRESS = @COMPRESS@
-COMPRESS_BEST_OPT = @COMPRESS_BEST_OPT@
-COMPRESS_FAST_OPT = @COMPRESS_FAST_OPT@
-COMPRESS_PATH = @COMPRESS_PATH@
-COMPRESS_SUFFIX = @COMPRESS_SUFFIX@
-CONFIG_CLOBBER_MY_CONFIG = @CONFIG_CLOBBER_MY_CONFIG@
-CONFIG_DIR = @CONFIG_DIR@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CURL_CONFIG = @CURL_CONFIG@
-CXX = @CXX@
-CXXCPP = @CXXCPP@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DD = @DD@
-DEFAULT_AMANDATES_FILE = @DEFAULT_AMANDATES_FILE@
-DEFAULT_CHANGER_DEVICE = @DEFAULT_CHANGER_DEVICE@
-DEFAULT_CONFIG = @DEFAULT_CONFIG@
-DEFAULT_MAILER = @DEFAULT_MAILER@
-DEFAULT_SERVER = @DEFAULT_SERVER@
-DEFAULT_TAPE_DEVICE = @DEFAULT_TAPE_DEVICE@
-DEFAULT_TAPE_SERVER = @DEFAULT_TAPE_SERVER@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-DOC_BUILD_DATE = @DOC_BUILD_DATE@
-DUMP = @DUMP@
-DUMP_RETURNS_1 = @DUMP_RETURNS_1@
-ECHO = @ECHO@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EOVERFLOW = @EOVERFLOW@
-EXAMPLE_TAPEDEV = @EXAMPLE_TAPEDEV@
-EXEEXT = @EXEEXT@
-F77 = @F77@
-FFLAGS = @FFLAGS@
-FLOAT_H = @FLOAT_H@
-GETCONF = @GETCONF@
-GETOPT_H = @GETOPT_H@
-GETTEXT = @GETTEXT@
-GLIB_CFLAGS = @GLIB_CFLAGS@
-GLIB_GENMARSHAL = @GLIB_GENMARSHAL@
-GLIB_LIBS = @GLIB_LIBS@
-GLIB_MKENUMS = @GLIB_MKENUMS@
-GMSGFMT = @GMSGFMT@
-GMSGFMT_015 = @GMSGFMT_015@
-GNULIB_CALLOC_POSIX = @GNULIB_CALLOC_POSIX@
-GNULIB_CHOWN = @GNULIB_CHOWN@
-GNULIB_DUP2 = @GNULIB_DUP2@
-GNULIB_ENVIRON = @GNULIB_ENVIRON@
-GNULIB_FCHDIR = @GNULIB_FCHDIR@
-GNULIB_FFLUSH = @GNULIB_FFLUSH@
-GNULIB_FOPEN = @GNULIB_FOPEN@
-GNULIB_FPRINTF_POSIX = @GNULIB_FPRINTF_POSIX@
-GNULIB_FREOPEN = @GNULIB_FREOPEN@
-GNULIB_FSEEK = @GNULIB_FSEEK@
-GNULIB_FSEEKO = @GNULIB_FSEEKO@
-GNULIB_FTELL = @GNULIB_FTELL@
-GNULIB_FTELLO = @GNULIB_FTELLO@
-GNULIB_FTRUNCATE = @GNULIB_FTRUNCATE@
-GNULIB_GETCWD = @GNULIB_GETCWD@
-GNULIB_GETDELIM = @GNULIB_GETDELIM@
-GNULIB_GETLINE = @GNULIB_GETLINE@
-GNULIB_GETLOGIN_R = @GNULIB_GETLOGIN_R@
-GNULIB_GETPAGESIZE = @GNULIB_GETPAGESIZE@
-GNULIB_GETSUBOPT = @GNULIB_GETSUBOPT@
-GNULIB_LCHOWN = @GNULIB_LCHOWN@
-GNULIB_LSEEK = @GNULIB_LSEEK@
-GNULIB_MALLOC_POSIX = @GNULIB_MALLOC_POSIX@
-GNULIB_MBSCASECMP = @GNULIB_MBSCASECMP@
-GNULIB_MBSCASESTR = @GNULIB_MBSCASESTR@
-GNULIB_MBSCHR = @GNULIB_MBSCHR@
-GNULIB_MBSCSPN = @GNULIB_MBSCSPN@
-GNULIB_MBSLEN = @GNULIB_MBSLEN@
-GNULIB_MBSNCASECMP = @GNULIB_MBSNCASECMP@
-GNULIB_MBSNLEN = @GNULIB_MBSNLEN@
-GNULIB_MBSPBRK = @GNULIB_MBSPBRK@
-GNULIB_MBSPCASECMP = @GNULIB_MBSPCASECMP@
-GNULIB_MBSRCHR = @GNULIB_MBSRCHR@
-GNULIB_MBSSEP = @GNULIB_MBSSEP@
-GNULIB_MBSSPN = @GNULIB_MBSSPN@
-GNULIB_MBSSTR = @GNULIB_MBSSTR@
-GNULIB_MBSTOK_R = @GNULIB_MBSTOK_R@
-GNULIB_MEMMEM = @GNULIB_MEMMEM@
-GNULIB_MEMPCPY = @GNULIB_MEMPCPY@
-GNULIB_MEMRCHR = @GNULIB_MEMRCHR@
-GNULIB_MKDTEMP = @GNULIB_MKDTEMP@
-GNULIB_MKSTEMP = @GNULIB_MKSTEMP@
-GNULIB_PRINTF_POSIX = @GNULIB_PRINTF_POSIX@
-GNULIB_PUTENV = @GNULIB_PUTENV@
-GNULIB_READLINK = @GNULIB_READLINK@
-GNULIB_REALLOC_POSIX = @GNULIB_REALLOC_POSIX@
-GNULIB_SETENV = @GNULIB_SETENV@
-GNULIB_SLEEP = @GNULIB_SLEEP@
-GNULIB_SNPRINTF = @GNULIB_SNPRINTF@
-GNULIB_SPRINTF_POSIX = @GNULIB_SPRINTF_POSIX@
-GNULIB_STPCPY = @GNULIB_STPCPY@
-GNULIB_STPNCPY = @GNULIB_STPNCPY@
-GNULIB_STRCASESTR = @GNULIB_STRCASESTR@
-GNULIB_STRCHRNUL = @GNULIB_STRCHRNUL@
-GNULIB_STRDUP = @GNULIB_STRDUP@
-GNULIB_STRERROR = @GNULIB_STRERROR@
-GNULIB_STRNDUP = @GNULIB_STRNDUP@
-GNULIB_STRNLEN = @GNULIB_STRNLEN@
-GNULIB_STRPBRK = @GNULIB_STRPBRK@
-GNULIB_STRSEP = @GNULIB_STRSEP@
-GNULIB_STRSIGNAL = @GNULIB_STRSIGNAL@
-GNULIB_STRSTR = @GNULIB_STRSTR@
-GNULIB_STRTOK_R = @GNULIB_STRTOK_R@
-GNULIB_UNSETENV = @GNULIB_UNSETENV@
-GNULIB_VASPRINTF = @GNULIB_VASPRINTF@
-GNULIB_VFPRINTF_POSIX = @GNULIB_VFPRINTF_POSIX@
-GNULIB_VPRINTF_POSIX = @GNULIB_VPRINTF_POSIX@
-GNULIB_VSNPRINTF = @GNULIB_VSNPRINTF@
-GNULIB_VSPRINTF_POSIX = @GNULIB_VSPRINTF_POSIX@
-GNULIB_WCWIDTH = @GNULIB_WCWIDTH@
-GNUPLOT = @GNUPLOT@
-GNUTAR = @GNUTAR@
-GNUTAR_LISTED_INCREMENTAL_DIR = @GNUTAR_LISTED_INCREMENTAL_DIR@
-GOBJECT_QUERY = @GOBJECT_QUERY@
-GREP = @GREP@
-GZIP = @GZIP@
-HAVE_CALLOC_POSIX = @HAVE_CALLOC_POSIX@
-HAVE_DECL_ENVIRON = @HAVE_DECL_ENVIRON@
-HAVE_DECL_GETDELIM = @HAVE_DECL_GETDELIM@
-HAVE_DECL_GETLINE = @HAVE_DECL_GETLINE@
-HAVE_DECL_GETLOGIN_R = @HAVE_DECL_GETLOGIN_R@
-HAVE_DECL_MEMMEM = @HAVE_DECL_MEMMEM@
-HAVE_DECL_MEMRCHR = @HAVE_DECL_MEMRCHR@
-HAVE_DECL_MKDIR = @HAVE_DECL_MKDIR@
-HAVE_DECL_SNPRINTF = @HAVE_DECL_SNPRINTF@
-HAVE_DECL_STRDUP = @HAVE_DECL_STRDUP@
-HAVE_DECL_STRERROR = @HAVE_DECL_STRERROR@
-HAVE_DECL_STRNDUP = @HAVE_DECL_STRNDUP@
-HAVE_DECL_STRNLEN = @HAVE_DECL_STRNLEN@
-HAVE_DECL_STRSIGNAL = @HAVE_DECL_STRSIGNAL@
-HAVE_DECL_STRTOK_R = @HAVE_DECL_STRTOK_R@
-HAVE_DECL_VSNPRINTF = @HAVE_DECL_VSNPRINTF@
-HAVE_DECL_WCWIDTH = @HAVE_DECL_WCWIDTH@
-HAVE_DUP2 = @HAVE_DUP2@
-HAVE_FSEEKO = @HAVE_FSEEKO@
-HAVE_FTELLO = @HAVE_FTELLO@
-HAVE_FTRUNCATE = @HAVE_FTRUNCATE@
-HAVE_GETPAGESIZE = @HAVE_GETPAGESIZE@
-HAVE_GETSUBOPT = @HAVE_GETSUBOPT@
-HAVE_GZIP = @HAVE_GZIP@
-HAVE_INTTYPES_H = @HAVE_INTTYPES_H@
-HAVE_IO_H = @HAVE_IO_H@
-HAVE_LONG_LONG_INT = @HAVE_LONG_LONG_INT@
-HAVE_LSTAT = @HAVE_LSTAT@
-HAVE_MALLOC_POSIX = @HAVE_MALLOC_POSIX@
-HAVE_MEMPCPY = @HAVE_MEMPCPY@
-HAVE_MKDTEMP = @HAVE_MKDTEMP@
-HAVE_NETINET_IN_H = @HAVE_NETINET_IN_H@
-HAVE_OS_H = @HAVE_OS_H@
-HAVE_READLINK = @HAVE_READLINK@
-HAVE_REALLOC_POSIX = @HAVE_REALLOC_POSIX@
-HAVE_SETENV = @HAVE_SETENV@
-HAVE_SIGNED_SIG_ATOMIC_T = @HAVE_SIGNED_SIG_ATOMIC_T@
-HAVE_SIGNED_WCHAR_T = @HAVE_SIGNED_WCHAR_T@
-HAVE_SIGNED_WINT_T = @HAVE_SIGNED_WINT_T@
-HAVE_SLEEP = @HAVE_SLEEP@
-HAVE_STDINT_H = @HAVE_STDINT_H@
-HAVE_STPCPY = @HAVE_STPCPY@
-HAVE_STPNCPY = @HAVE_STPNCPY@
-HAVE_STRCASESTR = @HAVE_STRCASESTR@
-HAVE_STRCHRNUL = @HAVE_STRCHRNUL@
-HAVE_STRNDUP = @HAVE_STRNDUP@
-HAVE_STRPBRK = @HAVE_STRPBRK@
-HAVE_STRSEP = @HAVE_STRSEP@
-HAVE_STRUCT_TIMEVAL = @HAVE_STRUCT_TIMEVAL@
-HAVE_SYS_BITYPES_H = @HAVE_SYS_BITYPES_H@
-HAVE_SYS_INTTYPES_H = @HAVE_SYS_INTTYPES_H@
-HAVE_SYS_PARAM_H = @HAVE_SYS_PARAM_H@
-HAVE_SYS_SOCKET_H = @HAVE_SYS_SOCKET_H@
-HAVE_SYS_TIME_H = @HAVE_SYS_TIME_H@
-HAVE_SYS_TYPES_H = @HAVE_SYS_TYPES_H@
-HAVE_UNISTD_H = @HAVE_UNISTD_H@
-HAVE_UNSETENV = @HAVE_UNSETENV@
-HAVE_UNSIGNED_LONG_LONG_INT = @HAVE_UNSIGNED_LONG_LONG_INT@
-HAVE_VASPRINTF = @HAVE_VASPRINTF@
-HAVE_VISIBILITY = @HAVE_VISIBILITY@
-HAVE_WCHAR_H = @HAVE_WCHAR_H@
-HAVE_WINSOCK2_H = @HAVE_WINSOCK2_H@
-HAVE_WS2TCPIP_H = @HAVE_WS2TCPIP_H@
-HAVE__BOOL = @HAVE__BOOL@
-INCLUDE_NEXT = @INCLUDE_NEXT@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-INTLLIBS = @INTLLIBS@
-INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
-KRB4_SECURITY = @KRB4_SECURITY@
-KRB5_SECURITY = @KRB5_SECURITY@
-LDFLAGS = @LDFLAGS@
-LEX = @LEX@
-LEXLIB = @LEXLIB@
-LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
-LIBCURL = @LIBCURL@
-LIBCURL_CPPFLAGS = @LIBCURL_CPPFLAGS@
-LIBICONV = @LIBICONV@
-LIBINTL = @LIBINTL@
-LIBMULTITHREAD = @LIBMULTITHREAD@
-LIBOBJS = @LIBOBJS@
-LIBPTH = @LIBPTH@
-LIBS = @LIBS@
-LIBTHREAD = @LIBTHREAD@
-LIBTOOL = @LIBTOOL@
-LIBTOOL_DEPS = @LIBTOOL_DEPS@
-LN_S = @LN_S@
-LOCKING = @LOCKING@
-LOW_TCPPORTRANGE = @LOW_TCPPORTRANGE@
-LTLIBICONV = @LTLIBICONV@
-LTLIBINTL = @LTLIBINTL@
-LTLIBMULTITHREAD = @LTLIBMULTITHREAD@
-LTLIBOBJS = @LTLIBOBJS@
-LTLIBPTH = @LTLIBPTH@
-LTLIBTHREAD = @LTLIBTHREAD@
-MAILER = @MAILER@
-MAKEINFO = @MAKEINFO@
-MCUTIL = @MCUTIL@
-MKDIR_P = @MKDIR_P@
-MSGFMT = @MSGFMT@
-MSGFMT_015 = @MSGFMT_015@
-MSGMERGE = @MSGMERGE@
-MT = @MT@
-MTX = @MTX@
-MT_FILE_FLAG = @MT_FILE_FLAG@
-NETINET_IN_H = @NETINET_IN_H@
-NEXT_FLOAT_H = @NEXT_FLOAT_H@
-NEXT_NETINET_IN_H = @NEXT_NETINET_IN_H@
-NEXT_STDINT_H = @NEXT_STDINT_H@
-NEXT_STDIO_H = @NEXT_STDIO_H@
-NEXT_STDLIB_H = @NEXT_STDLIB_H@
-NEXT_STRING_H = @NEXT_STRING_H@
-NEXT_SYS_SOCKET_H = @NEXT_SYS_SOCKET_H@
-NEXT_SYS_STAT_H = @NEXT_SYS_STAT_H@
-NEXT_SYS_TIME_H = @NEXT_SYS_TIME_H@
-NEXT_UNISTD_H = @NEXT_UNISTD_H@
-NEXT_WCHAR_H = @NEXT_WCHAR_H@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-PCAT = @PCAT@
-PERL = @PERL@
-PERLEXTLIBS = @PERLEXTLIBS@
-PERL_INC = @PERL_INC@
-PKG_CONFIG = @PKG_CONFIG@
-POSUB = @POSUB@
-PRINT = @PRINT@
-PS = @PS@
-PS_ARGUMENT = @PS_ARGUMENT@
-PTRDIFF_T_SUFFIX = @PTRDIFF_T_SUFFIX@
-RANLIB = @RANLIB@
-READLINE_LIBS = @READLINE_LIBS@
-REPLACE_CHOWN = @REPLACE_CHOWN@
-REPLACE_FCHDIR = @REPLACE_FCHDIR@
-REPLACE_FFLUSH = @REPLACE_FFLUSH@
-REPLACE_FOPEN = @REPLACE_FOPEN@
-REPLACE_FPRINTF = @REPLACE_FPRINTF@
-REPLACE_FREOPEN = @REPLACE_FREOPEN@
-REPLACE_FSEEK = @REPLACE_FSEEK@
-REPLACE_FSEEKO = @REPLACE_FSEEKO@
-REPLACE_FTELL = @REPLACE_FTELL@
-REPLACE_FTELLO = @REPLACE_FTELLO@
-REPLACE_GETCWD = @REPLACE_GETCWD@
-REPLACE_GETLINE = @REPLACE_GETLINE@
-REPLACE_GETPAGESIZE = @REPLACE_GETPAGESIZE@
-REPLACE_GETTIMEOFDAY = @REPLACE_GETTIMEOFDAY@
-REPLACE_LCHOWN = @REPLACE_LCHOWN@
-REPLACE_LSEEK = @REPLACE_LSEEK@
-REPLACE_MEMMEM = @REPLACE_MEMMEM@
-REPLACE_MKSTEMP = @REPLACE_MKSTEMP@
-REPLACE_PRINTF = @REPLACE_PRINTF@
-REPLACE_PUTENV = @REPLACE_PUTENV@
-REPLACE_SNPRINTF = @REPLACE_SNPRINTF@
-REPLACE_SPRINTF = @REPLACE_SPRINTF@
-REPLACE_STRCASESTR = @REPLACE_STRCASESTR@
-REPLACE_STRERROR = @REPLACE_STRERROR@
-REPLACE_STRSIGNAL = @REPLACE_STRSIGNAL@
-REPLACE_STRSTR = @REPLACE_STRSTR@
-REPLACE_VASPRINTF = @REPLACE_VASPRINTF@
-REPLACE_VFPRINTF = @REPLACE_VFPRINTF@
-REPLACE_VPRINTF = @REPLACE_VPRINTF@
-REPLACE_VSNPRINTF = @REPLACE_VSNPRINTF@
-REPLACE_VSPRINTF = @REPLACE_VSPRINTF@
-REPLACE_WCWIDTH = @REPLACE_WCWIDTH@
-RESTORE = @RESTORE@
-RSH_SECURITY = @RSH_SECURITY@
-SAMBA_CLIENT = @SAMBA_CLIENT@
-SERVER_HOST_INSTANCE = @SERVER_HOST_INSTANCE@
-SERVER_HOST_KEY_FILE = @SERVER_HOST_KEY_FILE@
-SERVER_HOST_PRINCIPAL = @SERVER_HOST_PRINCIPAL@
-SERVICE_SUFFIX = @SERVICE_SUFFIX@
-SETUID_GROUP = @SETUID_GROUP@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-SIG_ATOMIC_T_SUFFIX = @SIG_ATOMIC_T_SUFFIX@
-SIZE_T_SUFFIX = @SIZE_T_SUFFIX@
-SNAPSHOT_STAMP = @SNAPSHOT_STAMP@
-SORT = @SORT@
-SSH = @SSH@
-SSH_SECURITY = @SSH_SECURITY@
-STDBOOL_H = @STDBOOL_H@
-STDINT_H = @STDINT_H@
-STRIP = @STRIP@
-SVN = @SVN@
-SWIG = @SWIG@
-SWIG_LIB = @SWIG_LIB@
-SYS_SOCKET_H = @SYS_SOCKET_H@
-SYS_STAT_H = @SYS_STAT_H@
-SYS_TIME_H = @SYS_TIME_H@
-TCPPORTRANGE = @TCPPORTRANGE@
-TICKET_LIFETIME = @TICKET_LIFETIME@
-UDPPORTRANGE = @UDPPORTRANGE@
-UNCOMPRESS_OPT = @UNCOMPRESS_OPT@
-UNCOMPRESS_PATH = @UNCOMPRESS_PATH@
-USE_AMANDAHOSTS = @USE_AMANDAHOSTS@
-USE_NLS = @USE_NLS@
-USE_RUNDUMP = @USE_RUNDUMP@
-USE_VERSION_SUFFIXES = @USE_VERSION_SUFFIXES@
-VDUMP = @VDUMP@
-VERSION = @VERSION@
-VERSION_COMMENT = @VERSION_COMMENT@
-VERSION_MAJOR = @VERSION_MAJOR@
-VERSION_MINOR = @VERSION_MINOR@
-VERSION_PATCH = @VERSION_PATCH@
-VERSION_SUFFIX = @VERSION_SUFFIX@
-VOID_UNSETENV = @VOID_UNSETENV@
-VRESTORE = @VRESTORE@
-VXDUMP = @VXDUMP@
-VXRESTORE = @VXRESTORE@
-WCHAR_H = @WCHAR_H@
-WCHAR_T_SUFFIX = @WCHAR_T_SUFFIX@
-WINT_T_SUFFIX = @WINT_T_SUFFIX@
-XFSDUMP = @XFSDUMP@
-XFSRESTORE = @XFSRESTORE@
-XGETTEXT = @XGETTEXT@
-XGETTEXT_015 = @XGETTEXT_015@
-XSLREL = @XSLREL@
-XSLTPROC = @XSLTPROC@
-XSLTPROC_FLAGS = @XSLTPROC_FLAGS@
-YACC = @YACC@
-YFLAGS = @YFLAGS@
-_libcurl_config = @_libcurl_config@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-ac_ct_F77 = @ac_ct_F77@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-amdatadir = @amdatadir@
-amincludedir = @amincludedir@
-amlibdir = @amlibdir@
-amlibexecdir = @amlibexecdir@
-amperldir = @amperldir@
-bindir = @bindir@
-build = @build@
-build_alias = @build_alias@
-build_cpu = @build_cpu@
-build_os = @build_os@
-build_vendor = @build_vendor@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-gl_LIBOBJS = @gl_LIBOBJS@
-gl_LTLIBOBJS = @gl_LTLIBOBJS@
-gltests_LIBOBJS = @gltests_LIBOBJS@
-gltests_LTLIBOBJS = @gltests_LTLIBOBJS@
-host = @host@
-host_alias = @host_alias@
-host_cpu = @host_cpu@
-host_os = @host_os@
-host_vendor = @host_vendor@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target = @target@
-target_alias = @target_alias@
-target_cpu = @target_cpu@
-target_os = @target_os@
-target_vendor = @target_vendor@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-SUFFIXES = 
-EXTRA_DIST = 
-BUILT_SOURCES = 
-MOSTLYCLEANFILES = 
-CLEANFILES = 
-DISTCLEANFILES = $(am__append_1)
-MAINTAINERCLEANFILES = 
-
-# sed expression to strip leading directories from a filename; this converts e.g.,
-# src/foo/bar.so to bar.so.
-strip_leading_dirs = s|^.*/||
-@WANT_INSTALLPERMS_FALSE@do_file = pa="$$dest"/`echo "$$cmd"|sed '$(strip_leading_dirs)'|sed '$(transform)'`; \
-@WANT_INSTALLPERMS_FALSE@    echo "installperm \"$$chown\" \"$$chmod\" \"$$pa\"" >> "$(installperms_sh)"
-
-
-# define a snippet of the scripts below to either perform a chown/chmod operation,
-# or record that operation in the logfile.  On entry to the snippet, $$dest is the
-# destination directory, $$cmd is the srcdir-relative pathname of the target file,
-# $$chown is the ownership, and $$chmod is the permission pattern.
-@WANT_INSTALLPERMS_TRUE@do_file = pa="$(DESTDIR)$$dest"/`echo "$$cmd"|sed '$(strip_leading_dirs)'|sed '$(transform)'`; \
-@WANT_INSTALLPERMS_TRUE@    if test -n "$$chown"; then \
-@WANT_INSTALLPERMS_TRUE@       echo chown "$$chown" "$$pa"; \
-@WANT_INSTALLPERMS_TRUE@       chown "$$chown" "$$pa" || exit 1; \
-@WANT_INSTALLPERMS_TRUE@    fi; \
-@WANT_INSTALLPERMS_TRUE@    if test -n "$$chmod"; then \
-@WANT_INSTALLPERMS_TRUE@       echo chmod "$$chmod" "$$pa"; \
-@WANT_INSTALLPERMS_TRUE@       chmod "$$chmod" "$$pa" || exit 1; \
-@WANT_INSTALLPERMS_TRUE@    fi 
-
-@WANT_INSTALLPERMS_FALSE@installperms_sh = "$(top_builddir)/installperms.sh"
-INCLUDES = -I$(top_builddir)/common-src \
-               -I$(top_srcdir)/common-src   \
-               -I$(top_srcdir)/device-src   \
-               -I$(top_srcdir)/server-src   \
-               -I$(top_srcdir)/amandad-src  \
-               -I$(top_srcdir)/gnulib
-
-AM_CFLAGS = $(AMANDA_WARNING_CFLAGS)
-AM_LDFLAGS = $(AMANDA_STATIC_LDFLAGS)
-LINT = $(AMLINT)
-LINTFLAGS = $(AMLINTFLAGS)
-amlib_LTLIBRARIES = librestore.la
-LIB_EXTENSION = la
-
-###
-# Because libamanda includes routines (e.g. regex) provided by some system
-# libraries, and because of the way libtool sets up the command line, we
-# need to list libamanda twice here, first to override the system library
-# routines, and second to pick up any references in the other libraries.
-###
-LDADD = librestore.$(LIB_EXTENSION)              \
-      ../common-src/libamanda.$(LIB_EXTENSION) \
-      $(READLINE_LIBS)
-
-amidxtaped_LDADD = $(LDADD) \
-                  ../gnulib/libgnu.$(LIB_EXTENSION) \
-                  ../amandad-src/libamandad.$(LIB_EXTENSION)
-
-amidxtaped_SOURCES = amidxtaped.c
-amfetchdump_SOURCES = amfetchdump.c
-librestore_la_SOURCES = restore.c
-librestore_la_LDFLAGS = -release $(VERSION)
-librestore_la_LIBADD = ../common-src/libamanda.$(LIB_EXTENSION) \
-                               ../server-src/libamserver.$(LIB_EXTENSION) \
-                               ../device-src/libamdevice.$(LIB_EXTENSION)
-
-noinst_HEADERS = restore.h
-INSTALLPERMS_exec = \
-       dest=$(sbindir) chown=amanda $(sbin_PROGRAMS) \
-       dest=$(amlibexecdir) chown=amanda $(amlibexec_PROGRAMS)
-
-all: $(BUILT_SOURCES)
-       $(MAKE) $(AM_MAKEFLAGS) all-am
-
-.SUFFIXES:
-.SUFFIXES: .c .lo .o .obj
-$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am $(top_srcdir)/config/automake/vars.am $(top_srcdir)/config/automake/installperms.am $(top_srcdir)/config/automake/precompile.am $(am__configure_deps)
-       @for dep in $?; do \
-         case '$(am__configure_deps)' in \
-           *$$dep*) \
-             ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
-               && { if test -f $@; then exit 0; else break; fi; }; \
-             exit 1;; \
-         esac; \
-       done; \
-       echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu restore-src/Makefile'; \
-       $(am__cd) $(top_srcdir) && \
-         $(AUTOMAKE) --gnu restore-src/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-       @case '$?' in \
-         *config.status*) \
-           cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
-         *) \
-           echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
-           cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
-       esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-       cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure:  $(am__configure_deps)
-       cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
-       cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-install-amlibLTLIBRARIES: $(amlib_LTLIBRARIES)
-       @$(NORMAL_INSTALL)
-       test -z "$(amlibdir)" || $(MKDIR_P) "$(DESTDIR)$(amlibdir)"
-       @list='$(amlib_LTLIBRARIES)'; test -n "$(amlibdir)" || list=; \
-       list2=; for p in $$list; do \
-         if test -f $$p; then \
-           list2="$$list2 $$p"; \
-         else :; fi; \
-       done; \
-       test -z "$$list2" || { \
-         echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 '$(DESTDIR)$(amlibdir)'"; \
-         $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL) $(INSTALL_STRIP_FLAG) $$list2 "$(DESTDIR)$(amlibdir)"; \
-       }
-
-uninstall-amlibLTLIBRARIES:
-       @$(NORMAL_UNINSTALL)
-       @list='$(amlib_LTLIBRARIES)'; test -n "$(amlibdir)" || list=; \
-       for p in $$list; do \
-         $(am__strip_dir) \
-         echo " $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f '$(DESTDIR)$(amlibdir)/$$f'"; \
-         $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=uninstall rm -f "$(DESTDIR)$(amlibdir)/$$f"; \
-       done
-
-clean-amlibLTLIBRARIES:
-       -test -z "$(amlib_LTLIBRARIES)" || rm -f $(amlib_LTLIBRARIES)
-       @list='$(amlib_LTLIBRARIES)'; for p in $$list; do \
-         dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \
-         test "$$dir" != "$$p" || dir=.; \
-         echo "rm -f \"$${dir}/so_locations\""; \
-         rm -f "$${dir}/so_locations"; \
-       done
-librestore.la: $(librestore_la_OBJECTS) $(librestore_la_DEPENDENCIES) 
-       $(librestore_la_LINK) -rpath $(amlibdir) $(librestore_la_OBJECTS) $(librestore_la_LIBADD) $(LIBS)
-install-amlibexecPROGRAMS: $(amlibexec_PROGRAMS)
-       @$(NORMAL_INSTALL)
-       test -z "$(amlibexecdir)" || $(MKDIR_P) "$(DESTDIR)$(amlibexecdir)"
-       @list='$(amlibexec_PROGRAMS)'; test -n "$(amlibexecdir)" || list=; \
-       for p in $$list; do echo "$$p $$p"; done | \
-       sed 's/$(EXEEXT)$$//' | \
-       while read p p1; do if test -f $$p || test -f $$p1; \
-         then echo "$$p"; echo "$$p"; else :; fi; \
-       done | \
-       sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \
-           -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
-       sed 'N;N;N;s,\n, ,g' | \
-       $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
-         { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
-           if ($$2 == $$4) files[d] = files[d] " " $$1; \
-           else { print "f", $$3 "/" $$4, $$1; } } \
-         END { for (d in files) print "f", d, files[d] }' | \
-       while read type dir files; do \
-           if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
-           test -z "$$files" || { \
-           echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(amlibexecdir)$$dir'"; \
-           $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(amlibexecdir)$$dir" || exit $$?; \
-           } \
-       ; done
-
-uninstall-amlibexecPROGRAMS:
-       @$(NORMAL_UNINSTALL)
-       @list='$(amlibexec_PROGRAMS)'; test -n "$(amlibexecdir)" || list=; \
-       files=`for p in $$list; do echo "$$p"; done | \
-         sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
-             -e 's/$$/$(EXEEXT)/' `; \
-       test -n "$$list" || exit 0; \
-       echo " ( cd '$(DESTDIR)$(amlibexecdir)' && rm -f" $$files ")"; \
-       cd "$(DESTDIR)$(amlibexecdir)" && rm -f $$files
-
-clean-amlibexecPROGRAMS:
-       @list='$(amlibexec_PROGRAMS)'; test -n "$$list" || exit 0; \
-       echo " rm -f" $$list; \
-       rm -f $$list || exit $$?; \
-       test -n "$(EXEEXT)" || exit 0; \
-       list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
-       echo " rm -f" $$list; \
-       rm -f $$list
-install-sbinPROGRAMS: $(sbin_PROGRAMS)
-       @$(NORMAL_INSTALL)
-       test -z "$(sbindir)" || $(MKDIR_P) "$(DESTDIR)$(sbindir)"
-       @list='$(sbin_PROGRAMS)'; test -n "$(sbindir)" || list=; \
-       for p in $$list; do echo "$$p $$p"; done | \
-       sed 's/$(EXEEXT)$$//' | \
-       while read p p1; do if test -f $$p || test -f $$p1; \
-         then echo "$$p"; echo "$$p"; else :; fi; \
-       done | \
-       sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \
-           -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
-       sed 'N;N;N;s,\n, ,g' | \
-       $(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
-         { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
-           if ($$2 == $$4) files[d] = files[d] " " $$1; \
-           else { print "f", $$3 "/" $$4, $$1; } } \
-         END { for (d in files) print "f", d, files[d] }' | \
-       while read type dir files; do \
-           if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
-           test -z "$$files" || { \
-           echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(sbindir)$$dir'"; \
-           $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(sbindir)$$dir" || exit $$?; \
-           } \
-       ; done
-
-uninstall-sbinPROGRAMS:
-       @$(NORMAL_UNINSTALL)
-       @list='$(sbin_PROGRAMS)'; test -n "$(sbindir)" || list=; \
-       files=`for p in $$list; do echo "$$p"; done | \
-         sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
-             -e 's/$$/$(EXEEXT)/' `; \
-       test -n "$$list" || exit 0; \
-       echo " ( cd '$(DESTDIR)$(sbindir)' && rm -f" $$files ")"; \
-       cd "$(DESTDIR)$(sbindir)" && rm -f $$files
-
-clean-sbinPROGRAMS:
-       @list='$(sbin_PROGRAMS)'; test -n "$$list" || exit 0; \
-       echo " rm -f" $$list; \
-       rm -f $$list || exit $$?; \
-       test -n "$(EXEEXT)" || exit 0; \
-       list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
-       echo " rm -f" $$list; \
-       rm -f $$list
-amfetchdump$(EXEEXT): $(amfetchdump_OBJECTS) $(amfetchdump_DEPENDENCIES) 
-       @rm -f amfetchdump$(EXEEXT)
-       $(LINK) $(amfetchdump_OBJECTS) $(amfetchdump_LDADD) $(LIBS)
-amidxtaped$(EXEEXT): $(amidxtaped_OBJECTS) $(amidxtaped_DEPENDENCIES) 
-       @rm -f amidxtaped$(EXEEXT)
-       $(LINK) $(amidxtaped_OBJECTS) $(amidxtaped_LDADD) $(LIBS)
-amrestore$(EXEEXT): $(amrestore_OBJECTS) $(amrestore_DEPENDENCIES) 
-       @rm -f amrestore$(EXEEXT)
-       $(LINK) $(amrestore_OBJECTS) $(amrestore_LDADD) $(LIBS)
-
-mostlyclean-compile:
-       -rm -f *.$(OBJEXT)
-
-distclean-compile:
-       -rm -f *.tab.c
-
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/amfetchdump.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/amidxtaped.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/amrestore.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/restore.Plo@am__quote@
-
-.c.o:
-@am__fastdepCC_TRUE@   $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@   $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@      source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@      DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@  $(COMPILE) -c $<
-
-.c.obj:
-@am__fastdepCC_TRUE@   $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCC_TRUE@   $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@AMDEP_TRUE@@am__fastdepCC_FALSE@      source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@      DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@  $(COMPILE) -c `$(CYGPATH_W) '$<'`
-
-.c.lo:
-@am__fastdepCC_TRUE@   $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCC_TRUE@   $(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
-@AMDEP_TRUE@@am__fastdepCC_FALSE@      source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCC_FALSE@      DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCC_FALSE@  $(LTCOMPILE) -c -o $@ $<
-
-mostlyclean-libtool:
-       -rm -f *.lo
-
-clean-libtool:
-       -rm -rf .libs _libs
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
-       list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
-       unique=`for i in $$list; do \
-           if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-         done | \
-         $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-             END { if (nonempty) { for (i in files) print i; }; }'`; \
-       mkid -fID $$unique
-tags: TAGS
-
-TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
-               $(TAGS_FILES) $(LISP)
-       set x; \
-       here=`pwd`; \
-       list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
-       unique=`for i in $$list; do \
-           if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-         done | \
-         $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-             END { if (nonempty) { for (i in files) print i; }; }'`; \
-       shift; \
-       if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
-         test -n "$$unique" || unique=$$empty_fix; \
-         if test $$# -gt 0; then \
-           $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-             "$$@" $$unique; \
-         else \
-           $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-             $$unique; \
-         fi; \
-       fi
-ctags: CTAGS
-CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
-               $(TAGS_FILES) $(LISP)
-       list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
-       unique=`for i in $$list; do \
-           if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-         done | \
-         $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-             END { if (nonempty) { for (i in files) print i; }; }'`; \
-       test -z "$(CTAGS_ARGS)$$unique" \
-         || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-            $$unique
-
-GTAGS:
-       here=`$(am__cd) $(top_builddir) && pwd` \
-         && $(am__cd) $(top_srcdir) \
-         && gtags -i $(GTAGS_ARGS) "$$here"
-
-distclean-tags:
-       -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-distdir: $(DISTFILES)
-       @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-       topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-       list='$(DISTFILES)'; \
-         dist_files=`for file in $$list; do echo $$file; done | \
-         sed -e "s|^$$srcdirstrip/||;t" \
-             -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
-       case $$dist_files in \
-         */*) $(MKDIR_P) `echo "$$dist_files" | \
-                          sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
-                          sort -u` ;; \
-       esac; \
-       for file in $$dist_files; do \
-         if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-         if test -d $$d/$$file; then \
-           dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
-           if test -d "$(distdir)/$$file"; then \
-             find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-           fi; \
-           if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-             cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
-             find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-           fi; \
-           cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
-         else \
-           test -f "$(distdir)/$$file" \
-           || cp -p $$d/$$file "$(distdir)/$$file" \
-           || exit 1; \
-         fi; \
-       done
-check-am: all-am
-check: $(BUILT_SOURCES)
-       $(MAKE) $(AM_MAKEFLAGS) check-am
-all-am: Makefile $(LTLIBRARIES) $(PROGRAMS) $(HEADERS)
-installdirs:
-       for dir in "$(DESTDIR)$(amlibdir)" "$(DESTDIR)$(amlibexecdir)" "$(DESTDIR)$(sbindir)"; do \
-         test -z "$$dir" || $(MKDIR_P) "$$dir"; \
-       done
-install: $(BUILT_SOURCES)
-       $(MAKE) $(AM_MAKEFLAGS) install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
-       @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
-       $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-         install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-         `test -z '$(STRIP)' || \
-           echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-mostlyclean-generic:
-       -test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES)
-
-clean-generic:
-       -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
-
-distclean-generic:
-       -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-       -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-       -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
-
-maintainer-clean-generic:
-       @echo "This command is intended for maintainers to use"
-       @echo "it deletes files that may require special tools to rebuild."
-       -test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
-       -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
-clean: clean-am
-
-clean-am: clean-amlibLTLIBRARIES clean-amlibexecPROGRAMS clean-generic \
-       clean-libtool clean-sbinPROGRAMS mostlyclean-am
-
-distclean: distclean-am
-       -rm -rf ./$(DEPDIR)
-       -rm -f Makefile
-distclean-am: clean-am distclean-compile distclean-generic \
-       distclean-tags
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am: install-amlibLTLIBRARIES
-       @$(NORMAL_INSTALL)
-       $(MAKE) $(AM_MAKEFLAGS) install-data-hook
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am: install-amlibexecPROGRAMS install-sbinPROGRAMS
-       @$(NORMAL_INSTALL)
-       $(MAKE) $(AM_MAKEFLAGS) install-exec-hook
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man:
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
-       -rm -rf ./$(DEPDIR)
-       -rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-compile mostlyclean-generic \
-       mostlyclean-libtool
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-amlibLTLIBRARIES uninstall-amlibexecPROGRAMS \
-       uninstall-sbinPROGRAMS
-
-.MAKE: all check install install-am install-data-am install-exec-am \
-       install-strip
-
-.PHONY: CTAGS GTAGS all all-am check check-am clean \
-       clean-amlibLTLIBRARIES clean-amlibexecPROGRAMS clean-generic \
-       clean-libtool clean-sbinPROGRAMS ctags distclean \
-       distclean-compile distclean-generic distclean-libtool \
-       distclean-tags distdir dvi dvi-am html html-am info info-am \
-       install install-am install-amlibLTLIBRARIES \
-       install-amlibexecPROGRAMS install-data install-data-am \
-       install-data-hook install-dvi install-dvi-am install-exec \
-       install-exec-am install-exec-hook install-html install-html-am \
-       install-info install-info-am install-man install-pdf \
-       install-pdf-am install-ps install-ps-am install-sbinPROGRAMS \
-       install-strip installcheck installcheck-am installdirs \
-       maintainer-clean maintainer-clean-generic mostlyclean \
-       mostlyclean-compile mostlyclean-generic mostlyclean-libtool \
-       pdf pdf-am ps ps-am tags uninstall uninstall-am \
-       uninstall-amlibLTLIBRARIES uninstall-amlibexecPROGRAMS \
-       uninstall-sbinPROGRAMS
-
-
-installperms-exec:
-       @installperms="$(INSTALLPERMS_exec)"; \
-       test -n "$$installperms" && echo "Setting installation permissions on executables"; \
-       dest=; chown=; chmod=; \
-       for cmd in $$installperms; do \
-           case "$$cmd" in \
-               chown=amanda) \
-                       echo "  ($$cmd)"; chown="$(BINARY_OWNER):$(SETUID_GROUP)";; \
-               dest=*|chown=*|chmod=*) \
-                       echo "  ($$cmd)"; eval $$cmd;; \
-               *) $(do_file) ;; \
-           esac; \
-       done
-
-installperms-data:
-       @installperms="$(INSTALLPERMS_data)"; \
-       dest=; chown=; chmod=; \
-       for cmd in $$installperms; do \
-           case "$$cmd" in \
-               chown=amanda) \
-                       echo "  ($$cmd)"; chown="$(BINARY_OWNER):$(SETUID_GROUP)";; \
-               dest=*|chown=*|chmod=*) \
-                       echo "  ($$cmd)"; eval $$cmd;; \
-               *)  $(do_file) ;; \
-           esac; \
-       done
-
-install-exec-hook: installperms-exec
-install-data-hook: installperms-data
-
-# define a rule to initialize the installperms manifest file
-@WANT_INSTALLPERMS_TRUE@installperms-init:
-@WANT_INSTALLPERMS_FALSE@installperms-init:
-@WANT_INSTALLPERMS_FALSE@      rm -f "$(installperms_sh)"
-
-# A rule to make precompiler output from C files.  This is not used during
-# ordinary builds, but but can very useful in debugging problems on strange
-# architectures.  With this rule, we can ask users to 'make foo.i' and send
-# the result to us.
-#
-# It touches some automake internals ($COMPILE), but since it's not
-# build-critical, that's OK.
-%.i : %.c
-       $(COMPILE) -E -o $@ $<
-
-lint:
-       @ for p in $(amlibexec_PROGRAMS) $(sbin_PROGRAMS); do                   \
-               p=`basename $$p $(EXEEXT)`;                                     \
-               f="$$p.c $(librestore_la_SOURCES)";                             \
-               (cd ../common-src; make listlibsrc);                            \
-               f="$$f "`cat ../common-src/listlibsrc.output`;                  \
-               (cd ../server-src; make listlibsrc);                            \
-               f="$$f "`cat ../server-src/listlibsrc.output`;                  \
-               echo $(LINT) $$f;                                               \
-               $(LINT) $(LINTFLAGS) $(CPPFLAGS) $(DEFS) -I. -I$(top_builddir)/config   \
-                   $(INCLUDES) $$f;                                            \
-               if [ $$? -ne 0 ]; then                                          \
-                   exit 1;                                                     \
-               fi;                                                             \
-       done;                                                                   \
-        exit 0
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT: