--- /dev/null
+/* $Id$ */
+
+/* Internal PDCLib configuration <_PDCLIB_config.h>
+ (Generic Template)
+
+ This file is part of the Public Domain C Library (PDCLib).
+ Permission is granted to use, modify, and / or redistribute at will.
+*/
+
+/* -------------------------------------------------------------------------- */
+/* Misc */
+/* -------------------------------------------------------------------------- */
+
+/* The character (sequence) your platform uses as newline. */
+#define _PDCLIB_endl "\n"
+
+/* The number of attempts to complete an I/O operation before giving up. */
+/* (Example: How often a buffer flushing is attempted before reporting fail.) */
+#define _PDCLIB_IO_RETRIES 1
+
+/* What the system should do after an I/O operation did not succeed, before */
+/* trying again. (Empty by default.) */
+#define _PDCLIB_IO_RETRY_OP( stream )
+
+/* exit() can signal success to the host environment by the value of zero or */
+/* the constant EXIT_SUCCESS. Failure is signaled by EXIT_FAILURE. Note that */
+/* any other return value is "implementation-defined", i.e. your environment */
+/* is not required to handle it gracefully. Set your definitions here. */
+#define _PDCLIB_SUCCESS 0
+#define _PDCLIB_FAILURE -1
+
+/* qsort() in <stdlib.h> requires a function that swaps two memory areas. */
+/* Below is a naive implementation that can be improved significantly for */
+/* specific platforms, e.g. by swapping int instead of char. */
+#define _PDCLIB_memswp( i, j, size ) char tmp; do { tmp = *i; *i++ = *j; *j++ = tmp; } while ( --size );
+
+/* Define this to some compiler directive that can be written after the */
+/* parameter list of a function declaration to indicate the function does */
+/* never return. If your compiler does not support such a directive, define */
+/* to nothing. (This is to avoid warnings with the exit functions under GCC.) */
+#define _PDCLIB_NORETURN __attribute__(( noreturn ))
+
+/* -------------------------------------------------------------------------- */
+/* Integers */
+/* -------------------------------------------------------------------------- */
+/* Assuming 8-bit char, two's-complement architecture here. 'short' being */
+/* 16 bit, 'int' being either 16, 32 or 64 bit, 'long' being either 32 or 64 */
+/* bit (but 64 bit only if 'int' is 32 bit), and 'long long' being 64 bit if */
+/* 'long' is not, 64 or 128 bit otherwise. */
+/* Author is quite willing to support other systems but would like to hear of */
+/* interest in such support and details on the to-be-supported architecture */
+/* first, before going to lengths about it. */
+/* -------------------------------------------------------------------------- */
+
+/* Comment out (or delete) the line below if your 'char' type is unsigned. */
+#define _PDCLIB_CHAR_SIGNED 1
+
+/* Width of the integer types short, int, long, and long long, in bytes. */
+/* SHRT == 2, INT >= SHRT, LONG >= INT >= 4, LLONG >= LONG - check your */
+/* compiler manuals. */
+#define _PDCLIB_SHRT_BYTES 2
+#define _PDCLIB_INT_BYTES 4
+#define _PDCLIB_LONG_BYTES 8
+#define _PDCLIB_LLONG_BYTES 8
+
+/* <stdlib.h> defines the div() function family that allows taking quotient */
+/* and remainder of an integer division in one operation. Many platforms */
+/* support this in hardware / opcode, and the standard permits ordering of */
+/* the return structure in any way to fit the hardware. That is why those */
+/* structs can be configured here. */
+
+struct _PDCLIB_div_t
+{
+ int quot;
+ int rem;
+};
+
+struct _PDCLIB_ldiv_t
+{
+ long int quot;
+ long int rem;
+};
+
+struct _PDCLIB_lldiv_t
+{
+ long long int quot;
+ long long int rem;
+};
+
+/* -------------------------------------------------------------------------- */
+/* <stdint.h> defines a set of integer types that are of a minimum width, and */
+/* "usually fastest" on the system. (If, for example, accessing a single char */
+/* requires the CPU to access a complete int and then mask out the char, the */
+/* "usually fastest" type of at least 8 bits would be int, not char.) */
+/* If you do not have information on the relative performance of the types, */
+/* the standard allows you to define any type that meets minimum width and */
+/* signedness requirements. */
+/* The defines below are just configuration for the real typedefs and limit */
+/* definitions done in <_PDCLIB_int.h>. The uppercase define shall be either */
+/* SHRT, INT, LONG, or LLONG (telling which values to use for the *_MIN and */
+/* *_MAX limits); the lowercase define either short, int, long, or long long */
+/* (telling the actual type to use). */
+/* If you require a non-standard datatype to define the "usually fastest" */
+/* types, PDCLib as-is doesn't support that. Please contact the author with */
+/* details on your platform in that case, so support can be added. */
+/* -------------------------------------------------------------------------- */
+
+#define _PDCLIB_FAST8 INT
+#define _PDCLIB_fast8 int
+
+#define _PDCLIB_FAST16 INT
+#define _PDCLIB_fast16 int
+
+#define _PDCLIB_FAST32 INT
+#define _PDCLIB_fast32 int
+
+#define _PDCLIB_FAST64 LONG
+#define _PDCLIB_fast64 long
+
+/* -------------------------------------------------------------------------- */
+/* What follows are a couple of "special" typedefs and their limits. Again, */
+/* the actual definition of the limits is done in <_PDCLIB_int.h>, and the */
+/* defines here are merely "configuration". See above for details. */
+/* -------------------------------------------------------------------------- */
+
+/* The result type of substracting two pointers */
+#define _PDCLIB_ptrdiff long
+#define _PDCLIB_PTRDIFF LONG
+
+/* An integer type that can be accessed as atomic entity (think asynchronous
+ interrupts). The type itself is not defined in a freestanding environment,
+ but its limits are. (Don't ask.)
+*/
+#define _PDCLIB_sig_atomic int
+#define _PDCLIB_SIG_ATOMIC INT
+
+/* Result type of the 'sizeof' operator (must be unsigned) */
+#define _PDCLIB_size unsigned long
+#define _PDCLIB_SIZE ULONG
+
+/* Large enough an integer to hold all character codes of the largest supported
+ locale.
+*/
+#define _PDCLIB_wchar unsigned short
+#define _PDCLIB_WCHAR USHRT
+
+#define _PDCLIB_intptr long
+#define _PDCLIB_INTPTR LONG
+
+/* Largest supported integer type. Implementation note: see _PDCLIB_atomax(). */
+#define _PDCLIB_intmax long long int
+#define _PDCLIB_INTMAX LLINT
+/* You are also required to state the literal suffix for the intmax type */
+#define _PDCLIB_INTMAX_LITERAL ll
+
+/* -------------------------------------------------------------------------- */
+/* Floating Point */
+/* -------------------------------------------------------------------------- */
+
+/* Whether the implementation rounds toward zero (0), to nearest (1), toward
+ positive infinity (2), or toward negative infinity (3). (-1) signifies
+ indeterminable rounding, any other value implementation-specific rounding.
+*/
+#define _PDCLIB_FLT_ROUNDS -1
+
+/* Whether the implementation uses exact-width precision (0), promotes float
+ to double (1), or promotes float and double to long double (2). (-1)
+ signifies indeterminable behaviour, any other value implementation-specific
+ behaviour.
+*/
+#define _PDCLIB_FLT_EVAL_METHOD -1
+
+/* "Number of the decimal digits (n), such that any floating-point number in the
+ widest supported floating type with p(max) radix (b) digits can be rounded to
+ a floating-point number with (n) decimal digits and back again without change
+ to the value p(max) log(10)b if (b) is a power of 10, [1 + p(max) log(10)b]
+ otherwise."
+ 64bit IEC 60559 double format (53bit mantissa) is DECIMAL_DIG 17.
+ 80bit IEC 60559 double-extended format (64bit mantissa) is DECIMAL_DIG 21.
+*/
+#define _PDCLIB_DECIMAL_DIG 17
+
+/* -------------------------------------------------------------------------- */
+/* Platform-dependent macros defined by the standard headers. */
+/* -------------------------------------------------------------------------- */
+
+/* The offsetof macro
+ Contract: Expand to an integer constant expression of type size_t, which
+ represents the offset in bytes to the structure member from the beginning
+ of the structure. If the specified member is a bitfield, behaviour is
+ undefined.
+ There is no standard-compliant way to do this.
+ This implementation casts an integer zero to 'pointer to type', and then
+ takes the address of member. This is undefined behaviour but should work on
+ most compilers.
+*/
+#define _PDCLIB_offsetof( type, member ) ( (size_t) &( ( (type *) 0 )->member ) )
+
+/* Variable Length Parameter List Handling (<stdarg.h>)
+ No way to cover x86_64 with a generic implementation, as it uses register-
+ based parameter passing. Using the GCC builtins here.
+*/
+typedef __builtin_va_list _PDCLIB_va_list;
+#define _PDCLIB_va_arg( ap, type ) ( __builtin_va_arg( ap, type ) )
+#define _PDCLIB_va_copy( dest, src ) ( __builtin_va_copy( dest, src ) )
+#define _PDCLIB_va_end( ap ) ( __builtin_va_end( ap ) )
+#define _PDCLIB_va_start( ap, parmN ) ( __builtin_va_start( ap, parmN ) )
+
+/* -------------------------------------------------------------------------- */
+/* OS "glue", part 1 */
+/* These are values and data type definitions that you would have to adapt to */
+/* the capabilities and requirements of your OS. */
+/* The actual *functions* of the OS interface are declared in _PDCLIB_glue.h. */
+/* -------------------------------------------------------------------------- */
+
+/* Memory management -------------------------------------------------------- */
+
+/* Set this to the page size of your OS. If your OS does not support paging, set
+ to an appropriate value. (Too small, and malloc() will call the kernel too
+ often. Too large, and you will waste memory.)
+*/
+#define _PDCLIB_PAGESIZE 4096
+
+/* Set this to the minimum memory node size. Any malloc() for a smaller size
+ will be satisfied by a malloc() of this size instead (to avoid excessive
+ fragmentation).
+*/
+#define _PDCLIB_MINALLOC 8
+
+/* I/O ---------------------------------------------------------------------- */
+
+/* The type of the file descriptor returned by _PDCLIB_open(). */
+typedef int _PDCLIB_fd_t;
+
+/* The value (of type _PDCLIB_fd_t) returned by _PDCLIB_open() if the operation
+ failed.
+*/
+#define _PDCLIB_NOHANDLE ( (_PDCLIB_fd_t) -1 )
+
+/* The values of SEEK_SET, SEEK_CUR and SEEK_END, used by fseek().
+ Since at least one platform (POSIX) uses the same symbols for its own "seek"
+ function, we use whatever the host defines (if it does define them).
+*/
+#define _PDCLIB_SEEK_SET 0
+#define _PDCLIB_SEEK_CUR 1
+#define _PDCLIB_SEEK_END 2
+
+/* The number of characters that can be buffered with ungetc(). The standard
+ guarantees only one (1); anything larger would make applications relying on
+ this capability dependent on implementation-defined behaviour (not good).
+*/
+#define _PDCLIB_UNGETCBUFSIZE 1
+