Add parts for snekboard

[hw/altusmetrum] / pcb-rnd.mk

diff --git a/pcb-rnd.mk b/pcb-rnd.mk
index b179a21635ad188d7cfee794c75f5a9eddfa82a4..f3056791cb8c95ee3d4bd7e6bd1982c582909307 100644 (file)
--- a/pcb-rnd.mk
+++ b/pcb-rnd.mk
@@ -57,9 +57,10 @@ pcb: $(SCHEMATICS) Makefile $(CONFIG)
        lepton-netlist -g tEDAx -o $(PROJECT).tdx $(SCHEMATICS)
        echo 'LoadTedaxFrom(netlist, $(PROJECT).tdx); SaveTo(Layout)' | \
                pcb-rnd --gui batch $(PROJECT).lht
+#      echo "Run pcb-rnd and import $(PROJECT).tdx"
 
 $(PROJECT).xy: $(PROJECT).lht $(CONFIG)
-       pcb-rnd -x bom $(PROJECT).lht
+       pcb-rnd -x XY $(PROJECT).lht
 
 $(PROJECT).bottom.gbr: $(PROJECT).lht $(CONFIG)
        pcb-rnd -x gerber $(PROJECT).lht
@@ -149,6 +150,9 @@ $(PROJECT)-oshpark.zip: $(PROJECT).bottom.gbr $(PROJECT).all-drill.cnc
        elif [ -f $(PROJECT).group2.gbr -a -f $(PROJECT).group3.gbr ]; then \
                cp $(PROJECT).group2.gbr internal\ plane\ 1.ger; \
                cp $(PROJECT).group3.gbr internal\ plane\ 2.ger; \
+       elif [ -f $(PROJECT).group5.gbr -a -f $(PROJECT).group7.gbr ]; then \
+               cp $(PROJECT).group5.gbr internal\ plane\ 1.ger; \
+               cp $(PROJECT).group7.gbr internal\ plane\ 2.ger; \
        fi
        rm -f $@ && zip $@ *.ger *.xln
 
@@ -179,6 +183,9 @@ $(PROJECT)-seeed.zip: $(PROJECT).bottom.gbr $(PROJECT).all-drill.cnc $(PROJECT)-
        elif [ -f $(PROJECT).group2.gbr -a -f $(PROJECT).group3.gbr ]; then \
                cp $(PROJECT).group2.gbr $(PROJECT).gl2; \
                cp $(PROJECT).group3.gbr $(PROJECT).gl3; \
+       elif [ -f $(PROJECT).group5.gbr -a -f $(PROJECT).group7.gbr ]; then \
+               cp $(PROJECT).group5.gbr $(PROJECT).gl2; \
+               cp $(PROJECT).group7.gbr $(PROJECT).gl3; \
        fi
        rm -f $@ && zip $@ \
                $(PROJECT).gtl $(PROJECT).gts $(PROJECT).gto $(PROJECT).gtp \
@@ -215,6 +222,9 @@ $(PROJECT)-goldphoenix.zip: $(PROJECT).bottom.gbr $(PROJECT).all-drill.cnc $(PRO
        elif [ -f $(PROJECT).group2.gbr -a -f $(PROJECT).group3.gbr ]; then \
                cp $(PROJECT).group2.gbr $(PROJECT).gl2; \
                cp $(PROJECT).group3.gbr $(PROJECT).gl3; \
+       elif [ -f $(PROJECT).group5.gbr -a -f $(PROJECT).group7.gbr ]; then \
+               cp $(PROJECT).group5.gbr $(PROJECT).gl2; \
+               cp $(PROJECT).group7.gbr $(PROJECT).gl3; \
        fi
        rm -f $@ && zip $@ \
                $(PROJECT).gtl $(PROJECT).gts $(PROJECT).gto $(PROJECT).gtp \
@@ -224,6 +234,46 @@ $(PROJECT)-goldphoenix.zip: $(PROJECT).bottom.gbr $(PROJECT).all-drill.cnc $(PRO
                $(PROJECT).xy $(PROJECT)-sch.pdf \
                $(PROJECT)-goldphoenix.csv
 
+jlcpcb: $(PROJECT)-jlcpcb.zip 
+
+$(PROJECT)-jlcpcb.zip:  $(PROJECT).bottom.gbr $(PROJECT).xy
+       cp $(PROJECT).bottom.gbr $(PROJECT).gbl
+       cp $(PROJECT).bottommask.gbr $(PROJECT).gbs
+       if [ -f $(PROJECT).bottomsilk.gbr ]; then \
+               cp $(PROJECT).bottomsilk.gbr $(PROJECT).gbo; \
+       fi
+       if [ -f $(PROJECT).bottompaste.gbr ]; then \
+               cp $(PROJECT).bottompaste.gbr $(PROJECT).gbp; \
+       fi
+       if [ -f $(PROJECT).topsilk.gbr ]; then \
+               cp $(PROJECT).topsilk.gbr $(PROJECT).gto; \
+       fi
+       if [ -f $(PROJECT).toppaste.gbr ]; then \
+               cp $(PROJECT).toppaste.gbr $(PROJECT).gtp; \
+       fi
+       cp $(PROJECT).outline.gbr $(PROJECT).gko
+       cp $(PROJECT).top.gbr $(PROJECT).gtl
+       cp $(PROJECT).topmask.gbr $(PROJECT).gts
+       cp $(PROJECT).plated-drill.cnc $(PROJECT).xln
+       if [ -f $(PROJECT).unplated-drill.cnc ]; then \
+               cp $(PROJECT).unplated-drill.cnc $(PROJECT).drd; \
+       fi
+       if [ -f $(PROJECT).group1.gbr -a -f $(PROJECT).group2.gbr ]; then \
+               cp $(PROJECT).group1.gbr $(PROJECT).g2l; \
+               cp $(PROJECT).group2.gbr $(PROJECT).g3l; \
+       elif [ -f $(PROJECT).group2.gbr -a -f $(PROJECT).group3.gbr ]; then \
+               cp $(PROJECT).group2.gbr $(PROJECT).g2l; \
+               cp $(PROJECT).group3.gbr $(PROJECT).g3l; \
+       elif [ -f $(PROJECT).group5.gbr -a -f $(PROJECT).group7.gbr ]; then \
+               cp $(PROJECT).group5.gbr $(PROJECT).g2l; \
+               cp $(PROJECT).group7.gbr $(PROJECT).g3l; \
+       fi
+       rm -f $@ && zip $@ \
+               $(PROJECT).gtl $(PROJECT).gts $(PROJECT).gto $(PROJECT).gtp \
+               $(PROJECT).gbl $(PROJECT).gbs $(PROJECT).gbo $(PROJECT).gbp \
+               $(PROJECT).gko $(PROJECT).xln $(PROJECT).drd \
+               $(PROJECT).g2l $(PROJECT).g3l 
+
 stencilsunlimited:     $(PROJECT).bottom.gbr $(PROJECT).toppaste.gbr $(PROJECT).outline.gbr
        rm -f $(PROJECT)-stencil.zip && zip $(PROJECT)-stencil.zip $(PROJECT).toppaste.gbr $(PROJECT).outline.gbr
 
@@ -232,7 +282,7 @@ stencil:    $(PROJECT).lht
        mv $(PROJECT).toppaste.gbr stencil.gbr
 
 clean:
-       rm -f *.bom *.drc *.log *~ $(PROJECT).ps *.gbr *.cnc *bak* *- *.zip *.tdx
+       rm -f *.bom *.drc *.log *~ $(PROJECT).ps *.gbr *.cnc *bak* *- *.zip *.tdx *.backup
        rm -f *.net *.xy *.cmd *.png partslist partslist.csv *.ger *.xln PCB*save
        rm -f *.partslist *.unsorted $(PROJECT).xls muffin-*.pdf
        rm -f partslist-check.dk partslist-dk.csv partslist-mouser.csv partslist-other.csv
@@ -240,9 +290,10 @@ clean:
        rm -f $(PROJECT).gbl $(PROJECT).gbs $(PROJECT).gbo $(PROJECT).gbp $(PROJECT).ncd
        rm -f $(PROJECT).gto $(PROJECT).gtp $(PROJECT).gml $(PROJECT).gtl $(PROJECT).gts
        rm -f $(PROJECT).txt $(PROJECT).gl2 $(PROJECT).gl3
+       rm -f $(PROJECT).drd $(PROJECT).g2l $(PROJECT).g3l $(PROJECT).gko 
        rm -f $(PROJECT)-seeed.zip $(PROJECT)-seeed.csv
        rm -f $(PROJECT)-goldphoenix.zip $(PROJECT)-goldphoenix.csv
-       rm -f $(PROJECT)*.ps $(PROJECT)*.pdf
+       rm -f $(PROJECT)*.ps $(PROJECT)*.pdf $(PROJECT)-bom.csv
 
 muffins: muffin-6570.pdf muffin-5267.pdf muffin-keithp.pdf