--- /dev/null
+#
+# Copyright (C) 2005 Zmanda Incorporated.
+# All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License version 2 as published
+# by the Free Software Foundation.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+# or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+# for more details.
+#
+# You should have received a copy of the GNU General Public License along
+# with this program; if not, write to the Free Software Foundation, Inc.,
+# 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+#
+# Contact information: Zmanda Inc, 465 S. Mathilda Ave., Suite 300
+# Sunnyvale, CA 94086, USA, or: http://www.zmanda.com
+#
+
+
+%define build_srpm 0
+%{?srpm_only: %define build_srpm 1}
+
+# Pkg-config sometimes needs its own path set, and we need to allow users to
+# override our guess during detection. This macro takes care of that.
+# If no --define PKG_CONFIG_PATH was passed and env var $PKG_CONFIG_PATH is
+# set then use the env var.
+%{!?PKG_CONFIG_PATH: %{expand:%(echo ${PKG_CONFIG_PATH:+"%%define PKG_CONFIG_PATH $PKG_CONFIG_PATH"})}}
+
+%{?PKG_CONFIG_PATH:%{echo:PKG_CONFIG_PATH = %{PKG_CONFIG_PATH}}}
+
+# LDFLAGS: newer gnu linkers can use "-Wl,--as-needed", while older ones,
+# like rhel3 and sles9 can't.
+%define enable_as_needed --enable-as-needed
+
+# Define which Distribution we are building:
+# Try to detect the distribution we are building:
+%if %{_vendor} == redhat
+ # Fedora symlinks /etc/fedora-release to /etc/redhat-release for at least
+ # fc3-8. So RHEL and Fedora look at the same file. Different versions have
+ # different numbers of spaces; hence the use if $3 vs. $4..
+ %if %(awk '$1 == "Fedora" && $4 ~ /3.*/ { exit 1; }' /etc/redhat-release; echo $?)
+ %define dist fedora
+ %define disttag fc
+ %define distver 3
+ %define requires_libtermcap Requires: libtermcap.so.2
+ %define curl curl
+ %endif
+ %if %(awk '$1 == "Fedora" && $4 ~ /4.*/ { exit 1; }' /etc/redhat-release; echo $?)
+ %define dist fedora
+ %define disttag fc
+ %define distver 4
+ %define requires_libtermcap Requires: libtermcap.so.2
+ %define curl curl
+ %endif
+ %if %(awk '$1 == "Fedora" && $4 ~ /5.*/ { exit 1; }' /etc/redhat-release; echo $?)
+ %define dist fedora
+ %define disttag fc
+ %define distver 5
+ %define requires_libtermcap Requires: libtermcap.so.2
+ %define curl curl
+ %endif
+ %if %(awk '$1 == "Fedora" && $4 ~ /6.*/ { exit 1; }' /etc/redhat-release; echo $?)
+ %define dist fedora
+ %define disttag fc
+ %define distver 6
+ %define requires_libtermcap Requires: libtermcap.so.2
+ %define curl curl
+ %endif
+ %if %(awk '$1 == "Fedora" && $3 ~ /7.*/ { exit 1; }' /etc/redhat-release; echo $?)
+ %define dist fedora
+ %define disttag fc
+ %define distver 7
+ %define requires_libtermcap Requires: libtermcap.so.2
+ %define curl curl
+ %endif
+ # if macro cannot have an empty test and we're just testing the existance
+ %if %{?fedora:yes}%{!?fedora:no} == yes
+ %define dist fedora
+ %define disttag fc
+ %define distver %{fedora}
+ %if %{distver} <= 8
+ %define requires_libtermcap Requires: libtermcap.so.2
+ %define curl curl
+ %endif
+ %if %{distver} >= 9
+ %define curl libcurl
+ %endif
+ %if %{_host_cpu} == x86_64 && %{_target_cpu} == i686
+ # Do nothing if PKG_CONFIG_PATH was set by the user above.
+ %{!?PKG_CONFIG_PATH: %define PKG_CONFIG_PATH /usr/lib/pkgconfig}
+ %endif
+ %endif
+ %if %(awk '$1 == "Red" && $7 ~ /3.*/ { exit 1; }' /etc/redhat-release; echo $?)
+ %define dist redhat
+ %define disttag rhel
+ %define distver 3
+ %define tarver 1.14
+ %define requires_libtermcap Requires: libtermcap.so.2
+ %define curl curl
+ %define without_ipv6 --without-ipv6
+ %endif
+ %if %(awk '$1 == "Red" && $7 ~ /4.*/ { exit 1; }' /etc/redhat-release; echo $?)
+ %define dist redhat
+ %define disttag rhel
+ %define distver 4
+ %define tarver 1.14
+ %define requires_libtermcap Requires: libtermcap.so.2
+ %define curl curl
+ %endif
+ %if %(awk '$1 == "CentOS" && $3 ~ /4.*/ { exit 1; }' /etc/redhat-release; echo $?)
+ %define dist redhat
+ %define disttag rhel
+ %define distver 4
+ %define tarver 1.14
+ %define requires_libtermcap Requires: libtermcap.so.2
+ %define curl curl
+ %endif
+ %if %(awk '$1 == "Red" && $7 ~ /5.*/ { exit 1; }' /etc/redhat-release; echo $?)
+ %define dist redhat
+ %define disttag rhel
+ %define distver 5
+ %define curl curl
+ %endif
+ %if %(awk '$1 == "CentOS" && $3 ~ /5.*/ { exit 1; }' /etc/redhat-release; echo $?)
+ %define dist redhat
+ %define disttag rhel
+ %define distver 5
+ %define curl curl
+ %endif
+ %if %(awk '$1 == "Red" && $7 ~ /6.*/ { exit 1; }' /etc/redhat-release; echo $?)
+ %define dist redhat
+ %define disttag rhel
+ %define distver 6
+ %define curl libcurl
+ %endif
+
+ # If dist is undefined, we didn't detect.
+ %{!?dist:%define dist unknown}
+%endif
+# Detect Suse variants.
+%if %{_vendor} == "suse"
+ %define dist SuSE
+ %if %(awk '$1 == "openSUSE" { exit 1; }' /etc/SuSE-release; echo $?)
+ %define disttag suse
+ %define distver %(awk '$1=="openSUSE" {print $2}' /etc/SuSE-release)
+ %endif
+ %if %(awk '$1 == "SUSE" { exit 1; }' /etc/SuSE-release; echo $?)
+ %define disttag %(awk '$1=="SUSE" {$3=="Enterprise" ? TAG="sles" : TAG="suse" ; print TAG}' /etc/SuSE-release)
+ %define distver %(awk '$1=="SUSE" {$3=="Enterprise" ? VER=$5 : VER=$3 ; print VER}' /etc/SuSE-release)
+ # Always use quotes in rpm comparisons if values could be interpreted
+ # as integers.
+ %define curl curl
+ %if "%{distver}" == "9"
+ %undefine enable_as_needed
+ %endif
+ %endif
+%endif
+
+# Set options per distribution
+%if %{dist} == redhat || %{dist} == fedora
+ %define rpm_group Applications/Archiving
+ %define xinetd_reload restart
+ %define requires_initscripts Requires: initscripts
+%endif
+%if %{dist} == SuSE
+ %define rpm_group Productivity/Archiving/Backup
+ %define xinetd_reload restart
+%endif
+
+# Let's die if we haven't detected the distro. This might save some frustration.
+# RPM does not provide a way to exit gracefully, hence the tag_to_cause_exit.
+%{!?distver: %{error:"Your distribution and its version were not detected."}; %tag_to_cause_exit }
+# Set minimum tar version if it wasn't set in the per-distro section
+%{!?tarver: %define tarver 1.15}
+
+%define packer %(%{__id_u} -n)
+
+# --- Definitions ---
+
+# Define amanda_version using the value determined by
+# packaging/common/substitute.pl.
+%{!?amanda_version: %define amanda_version %%VERSION%% }
+%{!?amanda_release: %define amanda_release 1}
+%define amanda_version_info "Amanda Community Edition - version %{amanda_version}"
+%define amanda_user amandabackup
+%define amanda_group disk
+
+Summary: The Amanda Backup and Archiving System
+Name: amanda
+Version: %{amanda_version}
+%define rpm_release %{amanda_release}.%{disttag}%{distver}
+%if %{build_srpm}
+%define rpm_release %{amanda_release}
+%endif
+Release: %{rpm_release}
+Source: %{name}-%{version}.tar.gz
+License: http://wiki.zmanda.com/index.php/Amanda_Copyright
+Vendor: Zmanda, Inc.
+Packager: www.zmanda.com
+BuildRoot: %{_tmppath}/%{name}-%{version}-%{release}-%{packer}-buildroot
+Group: %{rpm_group}
+# TODO - Need required versions for these:
+BuildRequires: autoconf
+BuildRequires: automake
+BuildRequires: binutils
+BuildRequires: bison
+BuildRequires: flex
+BuildRequires: gcc
+BuildRequires: glib2 >= 2.2.0
+BuildRequires: glib2-devel
+BuildRequires: readline
+# Note: newer distros have changed most *-devel to lib*-devel, and added a
+# provides tag for backwards compat.
+BuildRequires: readline-devel
+BuildRequires: %{curl} >= 7.10.0
+BuildRequires: %{curl}-devel >= 7.10.0
+BuildRequires: openssl
+BuildRequires: openssl-devel
+BuildRequires: perl(ExtUtils::Embed)
+Requires: /bin/awk
+Requires: /bin/date
+Requires: /usr/bin/id
+Requires: /sbin/ldconfig
+Requires: /bin/sh
+Requires: /usr/sbin/useradd
+Requires: /usr/sbin/usermod
+Requires: fileutils
+Requires: grep
+Requires: gnuplot
+Requires: %{curl} >= 7.10.0
+Requires: openssl
+Requires: xinetd
+Requires: perl >= 5.6.0
+Requires: tar >= %{tarver}
+Requires: readline
+%{?requires_libtermcap}
+%{?requires_initscripts}
+
+%package backup_client
+Summary: The Amanda Backup and Archiving Client
+Group: %{rpm_group}
+Requires: /bin/awk
+Requires: fileutils
+Requires: grep
+%{?requires_libtermcap}
+%{?requires_initscripts}
+Requires: xinetd
+Requires: perl >= 5.6.0
+Requires: tar >= %{tarver}
+Requires: readline
+Provides: amanda-backup_client = %{amanda_version}
+Provides: libamclient-%{version}.so = %{amanda_version}
+Provides: libamanda-%{version}.so = %{amanda_version}
+Conflicts: amanda-backup_server
+# Native package names
+Obsoletes: amanda, amanda-client, amanda-server
+
+%package backup_server
+Summary: The Amanda Backup and Archiving Server
+Group: %{rpm_group}
+Requires: /bin/awk
+Requires: fileutils
+Requires: grep
+%{?requires_libtermcap}
+%{?requires_initscripts}
+Requires: xinetd
+Requires: perl >= 5.6.0
+Requires: tar >= %{tarver}
+Provides: amanda-backup_server = %{amanda_version}
+Provides: libamclient-%{version}.so = %{amanda_version}
+Provides: libamanda-%{version}.so = %{amanda_version}
+Provides: libamserver-%{version}.so = %{amanda_version}
+Provides: libamtape-%{version}.so = %{amanda_version}
+Provides: libamdevice-%{version}.so = %{amanda_version}
+Conflicts: amanda-backup_client
+# Native package names
+Obsoletes: amanda, amanda-client, amanda-server
+# --- Package descriptions ---
+
+%description
+Amanda is the leading Open-Source Backup and Archiving software.
+
+The amanda-backup_server package should be installed on the Amanda server, i.e.
+the machine attached to backup media (such as a tape drive or disk
+drives) where backups will be written. The amanda-backup_server package
+includes Amanda client. The amanda-backup_client package needs
+to be installed on every system that is being backed up.
+
+Amanda Forums is located at: http://forums.zmanda.com/
+Amanda Documentation is available at: http://wiki.zmanda.com/
+
+
+
+%description backup_server
+Amanda is the leading Open-Source Backup and Archiving software.
+
+This package contains the Amanda server. The amanda-backup_server package
+should be installed on the Amanda server, i.e. the machine attached
+to backup media (such as a tape drive or disk drives) where backups
+will be written. The amanda-backup_server package includes Amanda client.
+
+Amanda Forums is located at: http://forums.zmanda.com/
+Amanda Documentation is available at: http://wiki.zmanda.com/
+
+
+
+%description backup_client
+Amanda is the leading Open-Source Backup and Archiving software.
+
+This package contains the Amanda client. The amanda-backup_client package
+needs to be installed on every system that is being backed up.
+
+Amanda Forums is located at: http://forums.zmanda.com/
+Amanda Documentation is available at: http://wiki.zmanda.com/
+
+# --- Directory setup ---
+
+# Configure directories:
+%define PREFIX /usr
+%define EPREFIX %{PREFIX}
+%define BINDIR %{EPREFIX}/bin
+%define SBINDIR %{EPREFIX}/sbin
+%define LIBEXECDIR %{EPREFIX}/libexec
+%define AMLIBEXECDIR %{LIBEXECDIR}/amanda
+%define DATADIR %{PREFIX}/share
+%define SYSCONFDIR /etc
+%define LOCALSTATEDIR /var
+%define AMANDATES %{AMANDAHOMEDIR}/amandates
+%define AMANDAHOMEDIR %{LOCALSTATEDIR}/lib/amanda
+%ifarch x86_64
+%define LIBDIR %{EPREFIX}/lib64
+%else
+%define LIBDIR %{EPREFIX}/lib
+%endif
+%define AMLIBDIR %{LIBDIR}/amanda
+%define INCLUDEDIR %{PREFIX}/include
+%define MANDIR %{DATADIR}/man
+%define LOGDIR /var/log/amanda
+%define PERLSITELIB %(eval "`perl -V:installsitelib`"; echo $installsitelib)
+%define AMDATADIR /var/lib/amanda
+
+# Installation directories:
+%define ROOT_SBINDIR %{buildroot}/%{SBINDIR}
+%define ROOT_LIBEXECDIR %{buildroot}/%{LIBEXECDIR}
+%define ROOT_DATADIR %{buildroot}/%{DATADIR}
+%define ROOT_LOCALSTATEDIR %{buildroot}/%{LOCALSTATEDIR}
+%define ROOT_SYSCONFDIR %{buildroot}/%{SYSCONFDIR}
+%define ROOT_AMANDAHOMEDIR %{buildroot}/%{AMANDAHOMEDIR}
+%define ROOT_LIBDIR %{buildroot}/%{LIBDIR}
+%define ROOT_MANDIR %{buildroot}/%{MANDIR}
+%define ROOT_LOGDIR %{buildroot}/%{LOGDIR}
+%define ROOT_AMDATADIR %{buildroot}/%{AMDATADIR}
+
+# --- Unpack ---
+
+%prep
+%setup -q
+# --- Configure and compile ---
+
+%build
+%define config_user %{amanda_user}
+%define config_group %{amanda_group}
+
+# Set PKG_CONFIG_PATH=some/path if some/path was set on the command line, or by
+# the platform detection bits.
+# without_ipv6 should only be defined on rhel3.
+# LDFLAGS macro is defined except on rhel3.
+# --enable-as-needed must be conditional until configure tests whether
+# ld can accept --as-needed.
+./configure \
+ %{?PKG_CONFIG_PATH: PKG_CONFIG_PATH=%PKG_CONFIG_PATH} \
+ CFLAGS="%{optflags} -g -pipe" CXXFLAGS="%{optflags}" \
+ %{?LDFLAGS:LDFLAGS="${LDFLAGS} %{?LDFLAGS:%LDFLAGS}"} \
+ %{?enable_as_needed:%{enable_as_needed}} \
+ --quiet \
+ --prefix=%{PREFIX} \
+ --sysconfdir=%{SYSCONFDIR} \
+ --sharedstatedir=%{LOCALSTATEDIR} \
+ --localstatedir=%{LOCALSTATEDIR} \
+ --libdir=%{LIBDIR} \
+ --includedir=%{INCLUDEDIR} \
+ --mandir=%{MANDIR} \
+ --with-amdatadir=%{AMDATADIR} \
+ --with-gnuplot=/usr/bin/gnuplot \
+ --with-gnutar=/bin/tar \
+ --with-gnutar-listdir=%{AMANDAHOMEDIR}/gnutar-lists \
+ --with-index-server=localhost \
+ --with-tape-server=localhost \
+ --with-user=%{config_user} \
+ --with-group=%{config_group} \
+ --with-owner=%{packer} \
+ --with-fqdn \
+ --with-bsd-security \
+ --with-bsdtcp-security \
+ --with-bsdudp-security \
+ --with-ssh-security \
+ --with-debugging=%{LOGDIR} \
+ --with-assertions \
+ --disable-installperms \
+ %{?without_ipv6}
+
+make -s LIBTOOLFLAGS=--silent
+
+# --- Install to buildroot ---
+
+%install
+if [ "%{buildroot}" != "/" ]; then
+ if [ -d "%{buildroot}" ] ; then
+ rm -rf %{buildroot}
+ fi
+else
+ echo "BuildRoot was somehow set to / !"
+ exit -1
+fi
+
+make -s -j1 LIBTOOLFLAGS=--silent DESTDIR=%{buildroot} install
+
+rm -f %{ROOT_AMANDAHOMEDIR}/example/inetd.conf.amandaclient
+mkdir %{buildroot}/{etc,var/log}
+mkdir %{ROOT_LOCALSTATEDIR}/amanda
+mkdir %{ROOT_SYSCONFDIR}/amanda
+mkdir %{ROOT_AMANDAHOMEDIR}/gnutar-lists
+mkdir %{ROOT_LOGDIR}
+
+echo "%{amanda_version_info}" >%{ROOT_AMANDAHOMEDIR}/amanda-release
+
+# --- Clean up buildroot ---
+
+%clean
+if [ "%{buildroot}" != "/" ]; then
+ if [ -d "%{buildroot}" ] ; then
+ rm -rf %{buildroot}
+ fi
+else
+ echo "BuildRoot was somehow set to / !"
+ exit -1
+fi
+
+# --- Pre/post (un)installation scripts ---
+
+%pre
+TMPFILE=`mktemp /tmp/rpm-amanda.XXXXXXXXXXX`
+if [ $? -ne 0 ]; then
+ echo "Unable to mktemp!" 1>&2
+ exit 1
+fi
+LOGDIR="%{LOGDIR}"
+INSTALL_LOG="${LOGDIR}/install.log"
+INSTALL_ERR="${LOGDIR}/install.err"
+
+echo "`date +'%b %e %Y %T'`: Preparing to install: %{amanda_version_info}" >${TMPFILE}
+
+# Check for the 'amanda' user
+echo "`date +'%b %e %Y %T'`: Checking for '%{amanda_user}' user..." >>${TMPFILE}
+if [ "`id -u %{amanda_user} > /dev/null 2>&1 && echo 0 || echo 1`" != "0" ] ; then
+ useradd -c "Amanda" -M -g %{amanda_group} -d %{AMANDAHOMEDIR} -s /bin/bash %{amanda_user}
+ if [ %{dist} = "SuSE" ]; then
+ PASSWD_EXIT=$?
+ else
+ # Lock the amanda account until admin sets password
+ passwd -l %{amanda_user} >>/dev/null
+ PASSWD_EXIT=$?
+ fi
+ if [ ${PASSWD_EXIT} -eq 0 ] ; then
+ echo "`date +'%b %e %Y %T'`:" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: The '%{amanda_user}; user account has been successfully created." >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: Furthermore, the account has been automatically locked for you" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: for security purposes. Once a password for the '%{amanda_user}'" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: account has been set, the user can be unlocked by issuing" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: the following command as root.:" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`:" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: # passwd -u %{amanda_user}" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`:" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: If this is not a new installation of Amanda and you have" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: pre-existing Amanda configurations in %{SYSCONFDIR}/amanda" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: you should ensure that 'dumpuser' is set to '%{amanda_user}'" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: in those configurations. Additionally, you should ensure" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: that %{AMANDAHOMEDIR}/.amandahosts on your client systems" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: is properly configured to allow connections for the user" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: '%{amanda_user}'." >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`:" >>${TMPFILE}
+ PASSWD_OK=0
+ else
+ echo "`date +'%b %e %Y %T'`: !!! WARNING! WARNING! WARNING! WARNING! WARNING! WARNING! !!!" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: !!! !!!" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: !!! The '%{amanda_user}' user account for this system has been !!!" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: !!! created, however the user has no password set. For !!!" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: !!! security purposes this account is normally locked !!!" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: !!! after creation. Unfortunately, when locking this !!!" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: !!! account an error occurred. To ensure the security !!!" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: !!! of your system you should set a password for the !!!" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: !!! user account '%{amanda_user}' immediately! To set such a !!!" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: !!! password, please issue the following command.: !!!" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: !!! !!!" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: !!! # passwd %{amanda_user} !!!" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: !!! !!!" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: !!! WARNING! WARNING! WARNING! WARNING! WARNING! WARNING! !!!" >>${TMPFILE}
+ PASSWD_OK=1
+ fi
+else
+ # log information about 'amanda' user parameters
+ echo "`date +'%b %e %Y %T'`:" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: The Amanda backup software is configured to operate as the" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: user '%{amanda_user}'. This user exists on your system and has not" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: been modified. To ensure that Amanda functions properly," >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: please see that the following parameters are set for that" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: user.:" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`:" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: SHELL: /bin/bash" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: HOME: %{AMANDAHOMEDIR}" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: Default group: %{amanda_group}" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: Verifying %{amanda_user} parameters :" >>${TMPFILE}
+
+ if [ "`id -gn %{amanda_user}`" != "disk" ] ; then
+ echo "`date +'%b %e %Y %T'`: !!! WARNING! WARNING! WARNING! WARNING! WARNING! WARNING! !!!" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: !!! user 'amandabackup' is not part of the disk group,Pl !!!" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: !!! make sure it is corrected before start using amanda !!!" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: !!! WARNING! WARNING! WARNING! WARNING! WARNING! WARNING! !!!" >>${TMPFILE}
+ else
+ echo "`date +'%b %e %Y %T'`: Verified group name of user 'amandabackup'" >>${TMPFILE}
+ fi
+
+ if [ "`grep ^%{amanda_user} /etc/passwd|cut -d: -f7`" != "/bin/bash" ] ; then
+ echo "`date +'%b %e %Y %T'`: !!! WARNING! WARNING! WARNING! WARNING! WARNING! WARNING! !!!" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: !!! user 'amandabackup' default shell should be set to !!!" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: !!! /bin/bash, pl correct before start using Amanda !!!" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: !!! WARNING! WARNING! WARNING! WARNING! WARNING! WARNING! !!!" >>${TMPFILE}
+ else
+ echo "`date +'%b %e %Y %T'`: Verified Default shell for user 'amandabackup'" >>${TMPFILE}
+ fi
+
+ if [ "`grep ^%{amanda_user} /etc/passwd|cut -d: -f6`" != "%{AMANDAHOMEDIR}" ] ; then
+ echo "`date +'%b %e %Y %T'`: !!! WARNING! WARNING! WARNING! WARNING! WARNING! WARNING! !!!" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: !!! user 'amandabackup' home directory should be set to !!!" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: !!! %{AMANDAHOMEDIR} Pl correct before using Amanda !!!" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: !!! WARNING! WARNING! WARNING! WARNING! WARNING! WARNING! !!!" >>${TMPFILE}
+ else
+ echo "`date +'%b %e %Y %T'`: Verified Default home directory for user amandabackup" >>${TMPFILE}
+ fi
+ echo "`date +'%b %e %Y %T'`:" >>${TMPFILE}
+ PASSWD_OK=0
+fi
+if [ -d %{AMANDAHOMEDIR} ] ; then
+ echo -n "`date +'%b %e %Y %T'`: Checking ownership of '%{AMANDAHOMEDIR}'... " >>${TMPFILE}
+ if [ "`ls -dl %{AMANDAHOMEDIR} | awk '//{split($_,x); print x[3]}'`" = "%{amanda_user}" ] && \
+ [ "`ls -dl %{AMANDAHOMEDIR} | awk '//{split($_,x); print x[4]}'`" = "%{amanda_group}" ] ; then
+ echo "correct." >>${TMPFILE}
+ VARLIB_OK=0
+ else
+ echo "incorrect!" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: Please ensure that the directory '%{AMANDAHOMEDIR}' is owned by" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: the user '%{amanda_user}' and group '%{amanda_group}'." >>${TMPFILE}
+ VARLIB_OK=1
+ fi
+else
+ VARLIB_OK=0
+fi
+echo "`date +'%b %e %Y %T'`:" >>${TMPFILE}
+if [ ! -e ${LOGDIR} ] ; then
+ # create log directory
+ mkdir -m 0750 ${LOGDIR} >>${TMPFILE} 2>&1
+ chown %{amanda_user}:%{amanda_group} ${LOGDIR} >>${TMPFILE} 2>&1
+elif [ ! -d ${LOGDIR} ] ; then
+ mv ${LOGDIR} ${LOGDIR}.rpmsave >>${TMPFILE} 2>&1
+ mkdir -m 0750 ${LOGDIR} >>${TMPFILE} 2>&1
+ chown %{amanda_user}:%{amanda_group} ${LOGDIR} >>${TMPFILE} 2>&1
+ mv ${LOGDIR}.rpmsave ${LOGDIR}/ >>${TMPFILE} 2>&1
+fi
+
+if [ ${PASSWD_OK} -eq 1 ] || [ ${VARLIB_OK} -eq 1 ] ; then
+ cat ${TMPFILE}
+ cat ${TMPFILE} >>${INSTALL_ERR}
+ echo "Please review '${INSTALL_ERR}' to correct errors which have prevented the Amanda installaton." >&2
+ echo "Amanda installation log can be found in '${INSTALL_LOG}' and errors (if any) in '${INSTALL_ERR}'."
+ exit 1
+else
+ cat ${TMPFILE}
+ cat ${TMPFILE} >>${INSTALL_LOG}
+fi
+
+echo "`date +'%b %e %Y %T'`: === Amanda installation started. ===" >${TMPFILE}
+
+cat ${TMPFILE}
+cat ${TMPFILE} >>${INSTALL_LOG}
+if [ -f "${TMPFILE}" ]; then
+ rm -f "${TMPFILE}"
+fi
+
+%post
+TMPFILE=`mktemp /tmp/rpm-amanda.XXXXXXXXXXX
+if [ $? -ne 0 ]; then
+ echo "Unable to mktemp!" 1>&2
+ exit 1
+fi
+LOGDIR="%{LOGDIR}"
+INSTALL_LOG="${LOGDIR}/install.log"
+INSTALL_ERR="${LOGDIR}/install.err"
+
+echo -n "`date +'%b %e %Y %T'`: Updating library cache..." >${TMPFILE}
+/sbin/ldconfig >>${TMPFILE} 2>&1
+echo "done." >>${TMPFILE}
+cat ${TMPFILE}
+cat ${TMPFILE} >>${INSTALL_LOG}
+
+if [ -e /etc/xinetd.d ] && [ -d /etc/xinetd.d ] ; then
+ if [ ! -f /etc/xinetd.d/amandaserver ] ; then
+ cp %{AMANDAHOMEDIR}/example/xinetd.amandaserver /etc/xinetd.d/amandaserver
+ chmod 0644 /etc/xinetd.d/amandaserver >>${TMPFILE} 2>&1
+ if [ -f /etc/xinetd.d/amandaclient ] ; then
+ rm /etc/xinetd.d/amandaclient
+ fi
+ echo -n "`date +'%b %e %Y %T'`: Reloading xinetd configuration..." >${TMPFILE}
+ if [ "%{xinetd_reload}" == "reload" ] ; then
+ /etc/init.d/xinetd %{xinetd_reload} >>${TMPFILE} 2>&1
+ ret_val=$?
+ if [ ${ret_val} -ne 0 ] ; then
+ echo -n "reload failed. Attempting restart..." >>${TMPFILE}
+ /etc/init.d/xinetd restart >>${TMPFILE} 2>&1
+ ret_val=$?
+ fi
+ else
+ /etc/init.d/xinetd %{xinetd_reload} >>${TMPFILE} 2>&1
+ ret_val=$?
+ fi
+ if [ ${ret_val} -eq 0 ] ; then
+ echo "success." >>${TMPFILE}
+ cat ${TMPFILE}
+ cat ${TMPFILE} >>${INSTALL_LOG}
+ else
+ echo "failed. Please check your system logs." >>${TMPFILE}
+ cat ${TMPFILE} 1>&2
+ cat ${TMPFILE} >>${INSTALL_ERR}
+ fi
+ fi
+fi
+
+echo "`date +'%b %e %Y %T'`: Installing '%{AMANDATES}'." >${TMPFILE}
+ret_val=0
+if [ ! -f %{AMANDATES} ] ; then
+ touch %{AMANDATES} >>${TMPFILE} 2>&1
+ ret_val=$?
+ if [ ${ret_val} -eq 0 ]; then
+ echo "`date +'%b %e %Y %T'`: The file '%{AMANDATES}' has been created." >>${TMPFILE}
+ fi
+fi
+if [ ${ret_val} -eq 0 ]; then
+ echo "`date +'%b %e %Y %T'`: Ensuring correct permissions for '%{AMANDATES}'." >>${TMPFILE}
+ chown %{amanda_user}:%{amanda_group} %{AMANDATES} >>${TMPFILE} 2>&1
+ chmod 0640 %{AMANDATES} >>${TMPFILE} 2>&1
+ if [ -x /sbin/restorecon ] ; then
+ /sbin/restorecon %{AMANDATES} >>${TMPFILE} 2>&1
+ fi
+fi
+if [ ${ret_val} -eq 0 ]; then
+ echo "`date +'%b %e %Y %T'`: '%{AMANDATES}' Installation successful." >>${TMPFILE}
+ cat ${TMPFILE}
+ cat ${TMPFILE} >>${INSTALL_LOG}
+else
+ echo "`date +'%b %e %Y %T'`: '%{AMANDATES}' Installation failed." >>${TMPFILE}
+ cat ${TMPFILE}
+ cat ${TMPFILE} >>${INSTALL_ERR}
+fi
+
+
+# Install .gnupg directory
+echo "`date +'%b %e %Y %T'`: Installing '%{AMANDAHOMEDIR}/.gnupg'." >${TMPFILE}
+ret_val=0
+if [ ! -d %{AMANDAHOMEDIR}/.gnupg ] ; then
+ echo "`date +'%b %e %Y %T'`: '%{AMANDAHOMEDIR}/.gnupg' will be created." >>${TMPFILE}
+ mkdir %{AMANDAHOMEDIR}/.gnupg >>${TMPFILE} 2>&1
+ ret_val=$?
+ if [ ${ret_val} -eq 0 ]; then
+ echo "`date +'%b %e %Y %T'`: The directory '%{AMANDAHOMEDIR}/.gnupg' created successfully." >>${TMPFILE}
+ else
+ echo "`date +'%b %e %Y %T'`: The directory '%{AMANDAHOMEDIR}/.gnupg' creation failed." >>${TMPFILE}
+ fi
+fi
+if [ ${ret_val} -eq 0 ]; then
+ echo "`date +'%b %e %Y %T'`: Ensuring correct permissions for '%{AMANDAHOMEDIR}/.gnupg'." >>${TMPFILE}
+ chown %{amanda_user}:%{amanda_group} %{AMANDAHOMEDIR}/.gnupg >>${TMPFILE} 2>&1
+ ret_val=$?
+ if [ ${ret_val} -eq 0 ]; then
+ chmod 700 %{AMANDAHOMEDIR}/.gnupg >>${TMPFILE} 2>&1
+ ret_val=$?
+ fi
+fi
+if [ ${ret_val} -eq 0 ]; then
+ echo "`date +'%b %e %Y %T'`: '%{AMANDAHOMEDIR}/.gnupg' Installation successful." >>${TMPFILE}
+ cat ${TMPFILE}
+ cat ${TMPFILE} >>${INSTALL_LOG}
+else
+ echo "`date +'%b %e %Y %T'`: '%{AMANDAHOMEDIR}/.gnupg' Installation failed." >>${TMPFILE}
+ cat ${TMPFILE}
+ cat ${TMPFILE} >>${INSTALL_ERR}
+fi
+
+# Install .amandahosts
+echo "`date +'%b %e %Y %T'`: Checking '%{AMANDAHOMEDIR}/.amandahosts' file." >${TMPFILE}
+if [ ! -f %{AMANDAHOMEDIR}/.amandahosts ] ; then
+ touch %{AMANDAHOMEDIR}/.amandahosts >>${TMPFILE} 2>&1
+fi
+for host in localhost localhost.localdomain ; do
+ if [ -z "`grep \"^${host}[[:blank:]]\+root[[:blank:]]\+amindexd[[:blank:]]\+amidxtaped\" %{AMANDAHOMEDIR}/.amandahosts`" ] ; then
+ echo "${host} root amindexd amidxtaped" >>%{AMANDAHOMEDIR}/.amandahosts
+ fi
+ if [ -z "`grep \"^${host}[[:blank:]]\+%{amanda_user}[[:blank:]]\+amdump\" %{AMANDAHOMEDIR}/.amandahosts`" ] ; then
+ echo "${host} %{amanda_user} amdump" >>%{AMANDAHOMEDIR}/.amandahosts
+ fi
+done
+chown %{amanda_user}:%{amanda_group} %{AMANDAHOMEDIR}/.amandahosts >>${TMPFILE} 2>&1
+chmod 0600 %{AMANDAHOMEDIR}/.amandahosts >>${TMPFILE} 2>&1
+cat ${TMPFILE}
+cat ${TMPFILE} >>${INSTALL_LOG}
+
+# SSH RSA key generation for amdump
+KEYDIR="%{AMANDAHOMEDIR}/.ssh"
+KEYFILE="id_rsa_amdump"
+COMMENT="%{amanda_user}@server"
+if [ ! -d ${KEYDIR} ] ; then
+ if [ -f ${KEYDIR} ] ; then
+ echo "`date +'%b %e %Y %T'`: Directory '${KEYDIR}' exists as a file. Renaming to '${KEYDIR}.rpmsave'." >${TMPFILE}
+ mv ${KEYDIR} ${KEYDIR}.rpmsave
+ cat ${TMPFILE}
+ cat ${TMPFILE} >>${INSTALL_LOG}
+ fi
+ echo "`date +'%b %e %Y %T'`: Creating directory '${KEYDIR}'." >${TMPFILE}
+ mkdir ${KEYDIR} >>${TMPFILE} 2>&1
+ cat ${TMPFILE}
+ cat ${TMPFILE} >>${INSTALL_LOG}
+fi
+if [ ! -f ${KEYDIR}/${KEYFILE} ] ; then
+ echo "`date +'%b %e %Y %T'`: Creating ssh RSA key in '${KEYDIR}/${KEYFILE}'" >${TMPFILE}
+ cat ${TMPFILE}
+ cat ${TMPFILE} >>${INSTALL_LOG}
+ ssh-keygen -q -C $COMMENT -t rsa -f ${KEYDIR}/${KEYFILE} -N '' >>${TMPFILE} 2>&1
+ cat ${TMPFILE}
+ cat ${TMPFILE} >>${INSTALL_LOG}
+fi
+echo "`date +'%b %e %Y %T'`: Setting ownership and permissions for '${KEYDIR}' and '${KEYDIR}/${KEYFILE}*'" >${TMPFILE}
+chown %{amanda_user}:%{amanda_group} ${KEYDIR} ${KEYDIR}/${KEYFILE}* >>${TMPFILE} 2>&1
+chmod 0750 ${KEYDIR} >>${TMPFILE} 2>&1
+chmod 0600 ${KEYDIR}/${KEYFILE}* >>${TMPFILE} 2>&1
+cat ${TMPFILE}
+cat ${TMPFILE} >>${INSTALL_LOG}
+
+# SSH RSA key generation on client for amrecover
+KEYDIR="%{AMANDAHOMEDIR}/.ssh"
+KEYFILE="id_rsa_amrecover"
+COMMENT="root@client"
+if [ ! -d ${KEYDIR} ] ; then
+ if [ -f ${KEYDIR} ] ; then
+ echo "`date +'%b %e %Y %T'`: Directory '${KEYDIR}' exists as a file. Renaming to '${KEYDIR}.rpmsave'." >${TMPFILE}
+ mv ${KEYDIR} ${KEYDIR}.rpmsave >>${TMPFILE} 2>&1
+ cat ${TMPFILE}
+ cat ${TMPFILE} >>${INSTALL_LOG}
+ fi
+ echo "`date +'%b %e %Y %T'`: Creating directory '${KEYDIR}'." >${TMPFILE}
+ mkdir ${KEYDIR} >>${TMPFILE} 2>&1
+ cat ${TMPFILE}
+ cat ${TMPFILE} >>${INSTALL_LOG}
+fi
+if [ ! -f ${KEYDIR}/${KEYFILE} ] ; then
+ echo "`date +'%b %e %Y %T'`: Creating ssh RSA key in '${KEYDIR}/${KEYFILE}'" >${TMPFILE}
+ ssh-keygen -q -C $COMMENT -t rsa -f ${KEYDIR}/${KEYFILE} -N '' >>${TMPFILE} 2>&1
+ cat ${TMPFILE}
+ cat ${TMPFILE} >>${INSTALL_LOG}
+fi
+echo "`date +'%b %e %Y %T'`: Setting permissions for '${KEYDIR}'" >${TMPFILE}
+chown %{amanda_user}:%{amanda_group} ${KEYDIR} >>${TMPFILE} 2>&1
+chmod 0750 ${KEYDIR} >>${TMPFILE} 2>&1
+chmod 0600 ${KEYDIR}/${KEYFILE}* >>${TMPFILE} 2>&1
+cat ${TMPFILE}
+cat ${TMPFILE} >>${INSTALL_LOG}
+
+# environment variables (~amandabackup/.profile)
+echo "`date +'%b %e %Y %T'`: Checking for '%{AMANDAHOMEDIR}/.profile' and ensuring correct environment." >${TMPFILE}
+if [ ! -f %{AMANDAHOMEDIR}/.profile ] ; then
+ touch %{AMANDAHOMEDIR}/.profile >>${TMPFILE} 2>&1
+fi
+if [ -z "`grep PATH %{AMANDAHOMEDIR}/.profile | grep '%{SBINDIR}'`" ] ; then
+ echo "export PATH=\"\$PATH:%{SBINDIR}\"" >>%{AMANDAHOMEDIR}/.profile 2>>${TMPFILE}
+fi
+echo "`date +'%b %e %Y %T'`: Setting ownership and permissions for '%{AMANDAHOMEDIR}/.profile'" >>${TMPFILE}
+chown %{amanda_user}:%{amanda_group} %{AMANDAHOMEDIR}/.profile >>${TMPFILE} 2>&1
+chmod 0640 %{AMANDAHOMEDIR}/.profile >>${TMPFILE} 2>&1
+cat ${TMPFILE}
+cat ${TMPFILE} >>${INSTALL_LOG}
+
+echo "`date +'%b %e %Y %T'`: Sending anonymous distribution and version information to Zmanda" >> ${INSTALL_LOG}
+if [ -x /usr/bin/wget ]; then
+ /usr/bin/wget -q -o /dev/null -O - --timeout=5 http://www.zmanda.com/amanda-tips.php\?version=%{amanda_version}\&os=%{disttag}%{distver}\&type=server
+fi
+
+echo "`date +'%b %e %Y %T'`: === Amanda installation complete. ===" >${TMPFILE}
+
+cat ${TMPFILE}
+cat ${TMPFILE} >>${INSTALL_LOG}
+if [ -f "${TMPFILE}" ]; then
+ rm -f "${TMPFILE}"
+fi
+
+echo "Amanda installation log can be found in '${INSTALL_LOG}' and errors (if any) in '${INSTALL_ERR}'."
+%postun
+/sbin/ldconfig
+%pre backup_server
+TMPFILE=`mktemp /tmp/rpm-amanda.XXXXXXXXXXX`
+if [ $? -ne 0 ]; then
+ echo "Unable to mktemp!" 1>&2
+ exit 1
+fi
+
+LOGDIR="%{LOGDIR}"
+INSTALL_LOG="${LOGDIR}/install.log"
+INSTALL_ERR="${LOGDIR}/install.err"
+
+echo "`date +'%b %e %Y %T'`: Preparing to install: %{amanda_version_info}" >${TMPFILE}
+
+# Check for the 'amanda' user
+echo "`date +'%b %e %Y %T'`: Checking for '%{amanda_user}' user..." >>${TMPFILE}
+if [ "`id -u %{amanda_user} > /dev/null 2>&1 && echo 0 || echo 1`" != "0" ] ; then
+ useradd -c "Amanda" -M -g %{amanda_group} -d %{AMANDAHOMEDIR} -s /bin/bash %{amanda_user}
+ if [ %{dist} = "SuSE" ]; then
+ PASSWD_EXIT=$?
+ else
+ # Lock the amanda account until admin sets password
+ passwd -l %{amanda_user} >>/dev/null
+ PASSWD_EXIT=$?
+ fi
+ if [ ${PASSWD_EXIT} -eq 0 ] ; then
+ echo "`date +'%b %e %Y %T'`:" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: The '%{amanda_user}; user account has been successfully created." >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: Furthermore, the account has been automatically locked for you" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: for security purposes. Once a password for the '%{amanda_user}'" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: account has been set, the user can be unlocked by issuing" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: the following command as root.:" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`:" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: # passwd -u %{amanda_user}" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`:" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: If this is not a new installation of Amanda and you have" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: pre-existing Amanda configurations in %{SYSCONFDIR}/amanda" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: you should ensure that 'dumpuser' is set to '%{amanda_user}'" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: in those configurations. Additionally, you should ensure" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: that %{AMANDAHOMEDIR}/.amandahosts on your client systems" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: is properly configured to allow connections for the user" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: '%{amanda_user}'." >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`:" >>${TMPFILE}
+ PASSWD_OK=0
+ else
+ echo "`date +'%b %e %Y %T'`: !!! WARNING! WARNING! WARNING! WARNING! WARNING! WARNING! !!!" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: !!! !!!" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: !!! The '%{amanda_user}' user account for this system has been !!!" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: !!! created, however the user has no password set. For !!!" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: !!! security purposes this account is normally locked !!!" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: !!! after creation. Unfortunately, when locking this !!!" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: !!! account an error occurred. To ensure the security !!!" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: !!! of your system you should set a password for the !!!" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: !!! user account '%{amanda_user}' immediately! To set such a !!!" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: !!! password, please issue the following command.: !!!" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: !!! !!!" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: !!! # passwd %{amanda_user} !!!" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: !!! !!!" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: !!! WARNING! WARNING! WARNING! WARNING! WARNING! WARNING! !!!" >>${TMPFILE}
+ PASSWD_OK=1
+ fi
+else
+ # log information about 'amanda' user parameters
+ echo "`date +'%b %e %Y %T'`:" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: The Amanda backup software is configured to operate as the" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: user '%{amanda_user}'. This user exists on your system and has not" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: been modified. To ensure that Amanda functions properly," >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: please see that the following parameters are set for that" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: user.:" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`:" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: SHELL: /bin/bash" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: HOME: %{AMANDAHOMEDIR}" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: Default group: %{amanda_group}" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: Verifying %{amanda_user} parameters :" >>${TMPFILE}
+
+ if [ "`id -gn %{amanda_user}`" != "disk" ] ; then
+ echo "`date +'%b %e %Y %T'`: !!! WARNING! WARNING! WARNING! WARNING! WARNING! WARNING! !!!" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: !!! user 'amandabackup' is not part of the disk group,Pl !!!" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: !!! make sure it is corrected before start using Amanda !!!" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: !!! WARNING! WARNING! WARNING! WARNING! WARNING! WARNING! !!!" >>${TMPFILE}
+ else
+ echo "`date +'%b %e %Y %T'`: Verified group name of user 'amandabackup'" >>${TMPFILE}
+ fi
+
+ if [ "`grep ^%{amanda_user} /etc/passwd|cut -d: -f7`" != "/bin/bash" ] ; then
+ echo "`date +'%b %e %Y %T'`: !!! WARNING! WARNING! WARNING! WARNING! WARNING! WARNING! !!!" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: !!! user 'amandabackup' default shell should be set to !!!" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: !!! /bin/bash, pl correct before start using Amanda !!!" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: !!! WARNING! WARNING! WARNING! WARNING! WARNING! WARNING! !!!" >>${TMPFILE}
+ else
+ echo "`date +'%b %e %Y %T'`: Verified Default shell for user 'amandabackup'" >>${TMPFILE}
+ fi
+
+ if [ "`grep ^%{amanda_user} /etc/passwd|cut -d: -f6`" != "%{AMANDAHOMEDIR}" ] ; then
+ echo "`date +'%b %e %Y %T'`: !!! WARNING! WARNING! WARNING! WARNING! WARNING! WARNING! !!!" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: !!! user 'amandabackup' home directory should be set to !!!" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: !!! %{AMANDAHOMEDIR} Pl correct before using Amanda !!!" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: !!! WARNING! WARNING! WARNING! WARNING! WARNING! WARNING! !!!" >>${TMPFILE}
+ else
+ echo "`date +'%b %e %Y %T'`: Verified Default home directory for user amandabackup" >>${TMPFILE}
+ fi
+ echo "`date +'%b %e %Y %T'`:" >>${TMPFILE}
+ PASSWD_OK=0
+fi
+if [ -d %{AMANDAHOMEDIR} ] ; then
+ echo -n "`date +'%b %e %Y %T'`: Checking ownership of '%{AMANDAHOMEDIR}'... " >>${TMPFILE}
+ if [ "`ls -dl %{AMANDAHOMEDIR} | awk '//{split($_,x); print x[3]}'`" = "%{amanda_user}" ] && \
+ [ "`ls -dl %{AMANDAHOMEDIR} | awk '//{split($_,x); print x[4]}'`" = "%{amanda_group}" ] ; then
+ echo "correct." >>${TMPFILE}
+ VARLIB_OK=0
+ else
+ echo "incorrect!" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: Please ensure that the directory '%{AMANDAHOMEDIR}' is owned by" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: the user '%{amanda_user}' and group '%{amanda_group}'." >>${TMPFILE}
+ VARLIB_OK=1
+ fi
+else
+ VARLIB_OK=0
+fi
+echo "`date +'%b %e %Y %T'`:" >>${TMPFILE}
+
+if [ ! -e ${LOGDIR} ] ; then
+ # create log directory
+ mkdir -m 0750 ${LOGDIR} >>${TMPFILE} 2>&1
+ chown %{amanda_user}:%{amanda_group} ${LOGDIR} >>${TMPFILE} 2>&1
+elif [ ! -d ${LOGDIR} ] ; then
+ mv ${LOGDIR} ${LOGDIR}.rpmsave >>${TMPFILE} 2>&1
+ mkdir -m 0750 ${LOGDIR} >>${TMPFILE} 2>&1
+ chown %{amanda_user}:%{amanda_group} ${LOGDIR} >>${TMPFILE} 2>&1
+ mv ${LOGDIR}.rpmsave ${LOGDIR}/ >>${TMPFILE} 2>&1
+fi
+if [ ${PASSWD_OK} -eq 1 ] || [ ${VARLIB_OK} -eq 1 ] ; then
+ cat ${TMPFILE}
+ cat ${TMPFILE} >>${INSTALL_ERR}
+ echo "Please review '${INSTALL_ERR}' to correct errors which have prevented the Amanda installaton." >&2
+ echo "Amanda installation log can be found in '${INSTALL_LOG}' and errors (if any) in '${INSTALL_ERR}'."
+ exit 1
+else
+ cat ${TMPFILE}
+ cat ${TMPFILE} >>${INSTALL_LOG}
+fi
+
+echo "`date +'%b %e %Y %T'`: === Amanda backup server installation started. ===" >${TMPFILE}
+
+cat ${TMPFILE}
+cat ${TMPFILE} >>${INSTALL_LOG}
+if [ -f "${TMPFILE}" ]; then
+ rm -f "${TMPFILE}"
+fi
+%post backup_server
+TMPFILE=`mktemp /tmp/rpm-amanda.XXXXXXXXXXX`
+if [ $? -ne 0 ]; then
+ echo "Unable to mktemp!" 1>&2
+ exit 1
+fi
+LOGDIR="%{LOGDIR}"
+INSTALL_LOG="${LOGDIR}/install.log"
+INSTALL_ERR="${LOGDIR}/install.err"
+
+echo -n "`date +'%b %e %Y %T'`: Updating system library cache..." >${TMPFILE}
+/sbin/ldconfig
+echo "done." >>${TMPFILE}
+cat ${TMPFILE}
+cat ${TMPFILE} >>${INSTALL_LOG}
+
+if [ -e /etc/xinetd.d ] && [ -d /etc/xinetd.d ] ; then
+ if [ ! -f /etc/xinetd.d/amandaserver ] ; then
+ cp %{AMANDAHOMEDIR}/example/xinetd.amandaserver /etc/xinetd.d/amandaserver
+ chmod 0644 /etc/xinetd.d/amandaserver >>${TMPFILE} 2>&1
+ if [ -f /etc/xinetd.d/amandaclient ] ; then
+ rm /etc/xinetd.d/amandaclient
+ fi
+
+ echo -n "`date +'%b %e %Y %T'`: Reloading xinetd configuration..." >${TMPFILE}
+ if [ "%{xinetd_reload}" == "reload" ] ; then
+ /etc/init.d/xinetd %{xinetd_reload} >>${TMPFILE} 2>&1
+ ret_val=$?
+ if [ ${ret_val} -ne 0 ] ; then
+ echo -n "reload failed. Attempting restart..." >>${TMPFILE}
+ /etc/init.d/xinetd restart >>${TMPFILE} 2>&1
+ ret_val=$?
+ fi
+ else
+ /etc/init.d/xinetd %{xinetd_reload} >>${TMPFILE} 2>&1
+ ret_val=$?
+ fi
+ if [ ${ret_val} -eq 0 ] ; then
+ echo "success." >>${TMPFILE}
+ cat ${TMPFILE}
+ cat ${TMPFILE} >>${INSTALL_LOG}
+ else
+ echo "failed. Please check your system logs." >>${TMPFILE}
+ cat ${TMPFILE} 1>&2
+ cat ${TMPFILE} >>${INSTALL_ERR}
+ fi
+ fi
+fi
+
+echo "`date +'%b %e %Y %T'`: Installing '%{AMANDATES}'." >${TMPFILE}
+ret_val=0
+if [ ! -f %{AMANDATES} ] ; then
+ touch %{AMANDATES} >>${TMPFILE} 2>&1
+ ret_val=$?
+ if [ ${ret_val} -eq 0 ]; then
+ echo "`date +'%b %e %Y %T'`: The file '%{AMANDATES}' has been created." >>${TMPFILE}
+ fi
+fi
+if [ ${ret_val} -eq 0 ]; then
+ echo "`date +'%b %e %Y %T'`: Ensuring correct permissions for '%{AMANDATES}'." >>${TMPFILE}
+ chown %{amanda_user}:%{amanda_group} %{AMANDATES} >>${TMPFILE} 2>&1
+ chmod 0640 %{AMANDATES} >>${TMPFILE} 2>&1
+fi
+if [ ${ret_val} -eq 0 ]; then
+ echo "`date +'%b %e %Y %T'`: '%{AMANDATES}' Installation successful." >>${TMPFILE}
+ cat ${TMPFILE}
+ cat ${TMPFILE} >>${INSTALL_LOG}
+else
+ echo "`date +'%b %e %Y %T'`: '%{AMANDATES}' Installation failed." >>${TMPFILE}
+ cat ${TMPFILE}
+ cat ${TMPFILE} >>${INSTALL_ERR}
+fi
+
+# Install .amandahosts to server
+echo "`date +'%b %e %Y %T'`: Checking '%{AMANDAHOMEDIR}/.amandahosts' file." >${TMPFILE}
+if [ ! -f %{AMANDAHOMEDIR}/.amandahosts ] ; then
+ touch %{AMANDAHOMEDIR}/.amandahosts >>${TMPFILE} 2>&1
+fi
+for host in localhost localhost.localdomain ; do
+ if [ -z "`grep \"^${host}[[:blank:]]\+root[[:blank:]]\+amindexd[[:blank:]]\+amidxtaped\" %{AMANDAHOMEDIR}/.amandahosts`" ] ; then
+ echo "${host} root amindexd amidxtaped" >>%{AMANDAHOMEDIR}/.amandahosts
+ fi
+ if [ -z "`grep \"^${host}[[:blank:]]\+%{amanda_user}[[:blank:]]\+amdump\" %{AMANDAHOMEDIR}/.amandahosts`" ] ; then
+ echo "${host} %{amanda_user} amdump" >>%{AMANDAHOMEDIR}/.amandahosts
+ fi
+done
+chown %{amanda_user}:%{amanda_group} %{AMANDAHOMEDIR}/.amandahosts >>${TMPFILE} 2>&1
+chmod 0600 %{AMANDAHOMEDIR}/.amandahosts >>${TMPFILE} 2>&1
+cat ${TMPFILE}
+cat ${TMPFILE} >>${INSTALL_LOG}
+
+# Install amanda client configuration file
+echo "`date +'%b %e %Y %T'`: Checking '%{SYSCONFDIR}/amanda/amanda-client.conf' file." >${TMPFILE}
+if [ ! -f %{SYSCONFDIR}/amanda/amanda-client.conf ] ; then
+ cp %{AMANDAHOMEDIR}/example/amanda-client.conf %{SYSCONFDIR}/amanda/amanda-client.conf >>${TMPFILE} 2>&1
+fi
+chown %{amanda_user}:%{amanda_group} %{SYSCONFDIR}/amanda/amanda-client.conf >>${TMPFILE} 2>&1
+chmod 0600 %{SYSCONFDIR}/amanda/amanda-client.conf >>${TMPFILE} 2>&1
+cat ${TMPFILE}
+cat ${TMPFILE} >>${INSTALL_LOG}
+
+# install am_passphrase file to server
+echo "`date +'%b %e %Y %T'`: Checking '%{AMANDAHOMEDIR}/.am_passphrase' file." >${TMPFILE}
+if [ ! -f %{AMANDAHOMEDIR}/.am_passphrase ] ; then
+ echo "`date +'%b %e %Y %T'`: Create '%{AMANDAHOMEDIR}/.am_passphrase' file." >${TMPFILE}
+ touch %{AMANDAHOMEDIR}/.am_passphrase >>${TMPFILE} 2>&1
+ phrase=`echo $RANDOM | md5sum | awk '{print $1}'`
+ echo ${phrase} >>%{AMANDAHOMEDIR}/.am_passphrase
+
+ chown %{amanda_user}:%{amanda_group} %{AMANDAHOMEDIR}/.am_passphrase >>${TMPFILE} 2>&1
+ chmod 0700 %{AMANDAHOMEDIR}/.am_passphrase >>${TMPFILE} 2>&1
+fi
+cat ${TMPFILE}
+cat ${TMPFILE} >>${INSTALL_LOG}
+
+# Install .gnupg directory
+echo "`date +'%b %e %Y %T'`: Installing '%{AMANDAHOMEDIR}/.gnupg'." >${TMPFILE}
+ret_val=0
+if [ ! -d %{AMANDAHOMEDIR}/.gnupg ] ; then
+ echo "`date +'%b %e %Y %T'`: '%{AMANDAHOMEDIR}/.gnupg' will be created." >>${TMPFILE}
+ mkdir %{AMANDAHOMEDIR}/.gnupg >>${TMPFILE} 2>&1
+ ret_val=$?
+ if [ ${ret_val} -eq 0 ]; then
+ echo "`date +'%b %e %Y %T'`: The directory '%{AMANDAHOMEDIR}/.gnupg' created successfully." >>${TMPFILE}
+ else
+ echo "`date +'%b %e %Y %T'`: The directory '%{AMANDAHOMEDIR}/.gnupg' creation failed." >>${TMPFILE}
+ fi
+fi
+if [ ${ret_val} -eq 0 ]; then
+ echo "`date +'%b %e %Y %T'`: Ensuring correct permissions for '%{AMANDAHOMEDIR}/.gnupg'." >>${TMPFILE}
+ chown %{amanda_user}:%{amanda_group} %{AMANDAHOMEDIR}/.gnupg >>${TMPFILE} 2>&1
+ ret_val=$?
+ if [ ${ret_val} -eq 0 ]; then
+ chmod 700 %{AMANDAHOMEDIR}/.gnupg >>${TMPFILE} 2>&1
+ ret_val=$?
+ fi
+fi
+if [ ${ret_val} -eq 0 ]; then
+ echo "`date +'%b %e %Y %T'`: '%{AMANDAHOMEDIR}/.gnupg' Installation successful." >>${TMPFILE}
+ cat ${TMPFILE}
+ cat ${TMPFILE} >>${INSTALL_LOG}
+else
+ echo "`date +'%b %e %Y %T'`: '%{AMANDAHOMEDIR}/.gnupg' Installation failed." >>${TMPFILE}
+ cat ${TMPFILE}
+ cat ${TMPFILE} >>${INSTALL_ERR}
+fi
+
+# SSH RSA key generation on server for amdump
+KEYDIR="%{AMANDAHOMEDIR}/.ssh"
+KEYFILE="id_rsa_amdump"
+COMMENT="%{amanda_user}@server"
+if [ ! -d ${KEYDIR} ] ; then
+ if [ -f ${KEYDIR} ] ; then
+ echo "`date +'%b %e %Y %T'`: Directory '${KEYDIR}' exists as a file. Renaming to '${KEYDIR}.rpmsave'." >${TMPFILE}
+ mv ${KEYDIR} ${KEYDIR}.rpmsave >>${TMPFILE} 2>&1
+ cat ${TMPFILE}
+ cat ${TMPFILE} >>${INSTALL_LOG}
+ fi
+ echo "`date +'%b %e %Y %T'`: Creating directory '${KEYDIR}'." >${TMPFILE}
+ mkdir ${KEYDIR} >>${TMPFILE} 2>&1
+ cat ${TMPFILE}
+ cat ${TMPFILE} >>${INSTALL_LOG}
+fi
+if [ ! -f ${KEYDIR}/${KEYFILE} ] ; then
+ echo "`date +'%b %e %Y %T'`: Creating ssh RSA key in '${KEYDIR}/${KEYFILE}'" >${TMPFILE}
+ ssh-keygen -q -C $COMMENT -t rsa -f ${KEYDIR}/${KEYFILE} -N '' >>${TMPFILE} 2>&1
+ cat ${TMPFILE}
+ cat ${TMPFILE} >>${INSTALL_LOG}
+fi
+echo "`date +'%b %e %Y %T'`: Setting ownership and permissions for '${KEYDIR}' and '${KEYDIR}/${KEYFILE}*'" >${TMPFILE}
+chown %{amanda_user}:%{amanda_group} ${KEYDIR} ${KEYDIR}/${KEYFILE}* >>${TMPFILE} 2>&1
+chmod 0750 ${KEYDIR} >>${TMPFILE} 2>&1
+chmod 0600 ${KEYDIR}/${KEYFILE}* >>${TMPFILE} 2>&1
+cat ${TMPFILE}
+cat ${TMPFILE} >>${INSTALL_LOG}
+
+# SSH RSA key generation on client for amrecover
+KEYDIR="%{AMANDAHOMEDIR}/.ssh"
+KEYFILE="id_rsa_amrecover"
+COMMENT="root@client"
+if [ ! -d ${KEYDIR} ] ; then
+ if [ -f ${KEYDIR} ] ; then
+ echo "`date +'%b %e %Y %T'`: Directory '${KEYDIR}' exists as a file. Renaming to '${KEYDIR}.rpmsave'." >${TMPFILE}
+ mv ${KEYDIR} ${KEYDIR}.rpmsave >>${TMPFILE} 2>&1
+ cat ${TMPFILE}
+ cat ${TMPFILE} >>${INSTALL_LOG}
+ fi
+ echo "`date +'%b %e %Y %T'`: Creating directory '${KEYDIR}'." >${TMPFILE}
+ mkdir ${KEYDIR} >>${TMPFILE} 2>&1
+ cat ${TMPFILE}
+ cat ${TMPFILE} >>${INSTALL_LOG}
+fi
+if [ ! -f ${KEYDIR}/${KEYFILE} ] ; then
+ echo "`date +'%b %e %Y %T'`: Creating ssh RSA key in '${KEYDIR}/${KEYFILE}'" >${TMPFILE}
+ ssh-keygen -q -C $COMMENT -t rsa -f ${KEYDIR}/${KEYFILE} -N '' >>${TMPFILE} 2>&1
+ cat ${TMPFILE}
+ cat ${TMPFILE} >>${INSTALL_LOG}
+fi
+echo "`date +'%b %e %Y %T'`: Setting ownership and permissions for '${KEYDIR}'" >${TMPFILE}
+chown %{amanda_user}:%{amanda_group} ${KEYDIR} >>${TMPFILE} 2>&1
+chmod 0750 ${KEYDIR} >>${TMPFILE} 2>&1
+chmod 0600 ${KEYDIR}/${KEYFILE}* >>${TMPFILE} 2>&1
+cat ${TMPFILE}
+cat ${TMPFILE} >>${INSTALL_LOG}
+
+# environment variables (~amandabackup/.profile)
+echo "`date +'%b %e %Y %T'`: Checking for '%{AMANDAHOMEDIR}/.profile' and ensuring correct environment." >${TMPFILE}
+if [ ! -f %{AMANDAHOMEDIR}/.profile ] ; then
+ touch %{AMANDAHOMEDIR}/.profile >>${TMPFILE} 2>&1
+fi
+if [ -z "`grep PATH %{AMANDAHOMEDIR}/.profile | grep '%{SBINDIR}'`" ] ; then
+ echo "export PATH=\"\$PATH:%{SBINDIR}\"" >>%{AMANDAHOMEDIR}/.profile 2>>${TMPFILE}
+fi
+cat ${TMPFILE}
+cat ${TMPFILE} >>${INSTALL_LOG}
+
+echo "`date +'%b %e %Y %T'`: Setting ownership and permissions for '%{AMANDAHOMEDIR}/.profile'" >${TMPFILE}
+chown %{amanda_user}:%{amanda_group} %{AMANDAHOMEDIR}/.profile >>${TMPFILE} 2>&1
+chmod 0640 %{AMANDAHOMEDIR}/.profile >>${TMPFILE} 2>&1
+cat ${TMPFILE}
+cat ${TMPFILE} >>${INSTALL_LOG}
+
+echo "`date +'%b %e %Y %T'`: Sending anonymous distribution and version information to Zmanda" >> ${INSTALL_LOG}
+if [ -x /usr/bin/wget ]; then
+ /usr/bin/wget -q -o /dev/null -O - --timeout=5 http://www.zmanda.com/amanda-tips.php\?version=%{amanda_version}\&os=%{disttag}%{distver}\&type=server
+fi
+
+echo "`date +'%b %e %Y %T'`: === Amanda backup server installation complete. ===" >${TMPFILE}
+
+cat ${TMPFILE}
+cat ${TMPFILE} >>${INSTALL_LOG}
+
+if [ -f "${TMPFILE}" ]; then
+ rm -f "${TMPFILE}" >>${TMPFILE} 2>&1
+fi
+
+echo "Amanda installation log can be found in '${INSTALL_LOG}' and errors (if any) in '${INSTALL_ERR}'."
+%postun backup_server
+/sbin/ldconfig
+%pre backup_client
+TMPFILE=`mktemp /tmp/rpm-amanda.XXXXXXXXXXX`
+if [ $? -ne 0 ]; then
+ echo "Unable to mktemp!" 1>&2
+ exit 1
+fi
+LOGDIR="%{LOGDIR}"
+INSTALL_LOG="${LOGDIR}/install.log"
+INSTALL_ERR="${LOGDIR}/install.err"
+
+echo "`date +'%b %e %Y %T'`: Preparing to install: %{amanda_version_info}" >${TMPFILE}
+
+# Check for the 'amanda' user
+echo "`date +'%b %e %Y %T'`: Checking for '%{amanda_user}' user..." >>${TMPFILE}
+if [ "`id -u %{amanda_user} > /dev/null 2>&1 && echo 0 || echo 1`" != "0" ] ; then
+ useradd -c "Amanda" -M -g %{amanda_group} -d %{AMANDAHOMEDIR} -s /bin/bash %{amanda_user} >>${TMPFILE} 2>&1
+ if [ %{dist} = "SuSE" ]; then
+ PASSWD_EXIT=$?
+ else
+ # Lock the amanda account until admin sets password
+ passwd -l %{amanda_user} >>/dev/null
+ PASSWD_EXIT=$?
+ fi
+ if [ ${PASSWD_EXIT} -eq 0 ] ; then
+ echo "`date +'%b %e %Y %T'`:" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: The '%{amanda_user}; user account has been successfully created." >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: Furthermore, the account has been automatically locked for you" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: for security purposes. Once a password for the '%{amanda_user}'" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: account has been set, the user can be unlocked by issuing" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: the following command as root.:" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`:" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: # passwd -u %{amanda_user}" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`:" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: If this is not a new installation of Amanda and you have" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: pre-existing Amanda configurations in %{SYSCONFDIR}/amanda" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: you should ensure that 'dumpuser' is set to '%{amanda_user}'" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: in those configurations. Additionally, you should ensure" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: that %{AMANDAHOMEDIR}/.amandahosts on your client systems" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: is properly configured to allow connections for the user" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: '%{amanda_user}'." >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`:" >>${TMPFILE}
+ PASSWD_OK=0
+ else
+ echo "`date +'%b %e %Y %T'`: !!! WARNING! WARNING! WARNING! WARNING! WARNING! WARNING! !!!" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: !!! !!!" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: !!! The '%{amanda_user}' user account for this system has been !!!" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: !!! created, however the user has no password set. For !!!" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: !!! security purposes this account is normally locked !!!" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: !!! after creation. Unfortunately, when locking this !!!" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: !!! account an error occurred. To ensure the security !!!" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: !!! of your system you should set a password for the !!!" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: !!! user account '%{amanda_user}' immediately! To set such a !!!" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: !!! password, please issue the following command.: !!!" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: !!! !!!" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: !!! # passwd %{amanda_user} !!!" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: !!! !!!" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: !!! WARNING! WARNING! WARNING! WARNING! WARNING! WARNING! !!!" >>${TMPFILE}
+ PASSWD_OK=1
+ fi
+else
+ # log information about 'amanda' user parameters
+ echo "`date +'%b %e %Y %T'`:" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: The Amanda backup software is configured to operate as the" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: user '%{amanda_user}'. This user exists on your system and has not" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: been modified. To ensure that Amanda functions properly," >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: please see that the following parameters are set for that" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: user.:" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`:" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: SHELL: /bin/bash" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: HOME: %{AMANDAHOMEDIR}" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: Default group: %{amanda_group}" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: Verifying %{amanda_user} parameters :" >>${TMPFILE}
+
+ if [ "`id -gn %{amanda_user}`" != "disk" ] ; then
+ echo "`date +'%b %e %Y %T'`: !!! WARNING! WARNING! WARNING! WARNING! WARNING! WARNING! !!!" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: !!! user 'amandabackup' is not part of the disk group,Pl !!!" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: !!! make sure it is corrected before start using Amanda !!!" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: !!! WARNING! WARNING! WARNING! WARNING! WARNING! WARNING! !!!" >>${TMPFILE}
+ else
+ echo "`date +'%b %e %Y %T'`: Verified group name of user 'amandabackup'" >>${TMPFILE}
+ fi
+
+ if [ "`grep ^%{amanda_user} /etc/passwd|cut -d: -f7`" != "/bin/bash" ] ; then
+ echo "`date +'%b %e %Y %T'`: !!! WARNING! WARNING! WARNING! WARNING! WARNING! WARNING! !!!" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: !!! user 'amandabackup' default shell should be set to !!!" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: !!! /bin/bash, pl correct before start using Amanda !!!" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: !!! WARNING! WARNING! WARNING! WARNING! WARNING! WARNING! !!!" >>${TMPFILE}
+ else
+ echo "`date +'%b %e %Y %T'`: Verified Default shell for user 'amandabackup'" >>${TMPFILE}
+ fi
+
+ if [ "`grep ^%{amanda_user} /etc/passwd|cut -d: -f6`" != "%{AMANDAHOMEDIR}" ] ; then
+ echo "`date +'%b %e %Y %T'`: !!! WARNING! WARNING! WARNING! WARNING! WARNING! WARNING! !!!" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: !!! user 'amandabackup' home directory should be set to !!!" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: !!! %{AMANDAHOMEDIR} Pl correct before using Amanda !!!" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: !!! WARNING! WARNING! WARNING! WARNING! WARNING! WARNING! !!!" >>${TMPFILE}
+ else
+ echo "`date +'%b %e %Y %T'`: Verified Default home directory for user amandabackup" >>${TMPFILE}
+ fi
+ echo "`date +'%b %e %Y %T'`:" >>${TMPFILE}
+ PASSWD_OK=0
+fi
+if [ -d %{AMANDAHOMEDIR} ] ; then
+ echo -n "`date +'%b %e %Y %T'`: Checking ownership of '%{AMANDAHOMEDIR}'... " >>${TMPFILE}
+ if [ "`ls -dl %{AMANDAHOMEDIR} | awk '//{split($_,x); print x[3]}'`" = "%{amanda_user}" ] && \
+ [ "`ls -dl %{AMANDAHOMEDIR} | awk '//{split($_,x); print x[4]}'`" = "%{amanda_group}" ] ; then
+ echo "correct." >>${TMPFILE}
+ VARLIB_OK=0
+ else
+ echo "incorrect!" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: Please ensure that the directory '%{AMANDAHOMEDIR}' is owned by" >>${TMPFILE}
+ echo "`date +'%b %e %Y %T'`: the user '%{amanda_user}' and group '%{amanda_group}'." >>${TMPFILE}
+ VARLIB_OK=1
+ fi
+else
+ VARLIB_OK=0
+fi
+echo "`date +'%b %e %Y %T'`:" >>${TMPFILE}
+
+if [ ! -e ${LOGDIR} ] ; then
+ # create log directory
+ mkdir -m 0750 ${LOGDIR} >>${TMPFILE} 2>&1
+ chown %{amanda_user}:%{amanda_group} ${LOGDIR} >>${TMPFILE} 2>&1
+elif [ ! -d ${LOGDIR} ] ; then
+ mv ${LOGDIR} ${LOGDIR}.rpmsave >>${TMPFILE} 2>&1
+ mkdir -m 0750 ${LOGDIR} >>${TMPFILE} 2>&1
+ chown %{amanda_user}:%{amanda_group} ${LOGDIR} >>${TMPFILE} 2>&1
+ mv ${LOGDIR}.rpmsave ${LOGDIR}/ >>${TMPFILE} 2>&1
+fi
+if [ ${PASSWD_OK} -eq 1 ] || [ ${VARLIB_OK} -eq 1 ] ; then
+ cat ${TMPFILE}
+ cat ${TMPFILE} >>${INSTALL_ERR}
+ echo "Please review '${INSTALL_ERR}' to correct errors which have prevented the Amanda installaton." >&2
+ echo "Amanda installation log can be found in '${INSTALL_LOG}' and errors (if any) in '${INSTALL_ERR}'."
+ exit 1
+else
+ cat ${TMPFILE}
+ cat ${TMPFILE} >>${INSTALL_LOG}
+fi
+
+echo "`date +'%b %e %Y %T'`: === Amanda backup client installation started. ===" >${TMPFILE}
+
+cat ${TMPFILE}
+cat ${TMPFILE} >>${INSTALL_LOG}
+
+if [ -f "${TMPFILE}" ]; then
+ rm -f "${TMPFILE}"
+fi
+
+%post backup_client
+TMPFILE=`mktemp /tmp/rpm-amanda.XXXXXXXXXXX`
+if [ $? -ne 0 ]; then
+ echo "Unable to mktemp!" 1>&2
+ exit 1
+fi
+LOGDIR="%{LOGDIR}"
+INSTALL_LOG="${LOGDIR}/install.log"
+INSTALL_ERR="${LOGDIR}/install.err"
+
+echo -n "`date +'%b %e %Y %T'`: Updating system library cache..." >${TMPFILE}
+/sbin/ldconfig
+echo "done." >>${TMPFILE}
+cat ${TMPFILE}
+cat ${TMPFILE} >>${INSTALL_LOG}
+
+if [ -e /etc/xinetd.d ] && [ -d /etc/xinetd.d ] ; then
+ if [ ! -f /etc/xinetd.d/amandaclient ] ; then
+ cp %{AMANDAHOMEDIR}/example/xinetd.amandaclient /etc/xinetd.d/amandaclient
+
+ echo -n "`date +'%b %e %Y %T'`: Reloading xinetd configuration..." >${TMPFILE}
+ if [ "%{xinetd_reload}" == "reload" ] ; then
+ /etc/init.d/xinetd %{xinetd_reload} >>${TMPFILE} 2>&1
+ ret_val=$?
+ if [ ${ret_val} -ne 0 ] ; then
+ echo -n "reload failed. Attempting restart..." >>${TMPFILE}
+ /etc/init.d/xinetd restart >>${TMPFILE} 2>&1
+ ret_val=$?
+ fi
+ else
+ /etc/init.d/xinetd %{xinetd_reload} >>${TMPFILE} 2>&1
+ ret_val=$?
+ fi
+ if [ ${ret_val} -eq 0 ] ; then
+ echo "success." >>${TMPFILE}
+ cat ${TMPFILE}
+ cat ${TMPFILE} >>${INSTALL_LOG}
+ else
+ echo "failed. Please check your system logs." >>${TMPFILE}
+ cat ${TMPFILE}
+ cat ${TMPFILE} >>${INSTALL_LOG}
+ fi
+ fi
+fi
+
+echo "`date +'%b %e %Y %T'`: Installing '%{AMANDATES}'." >${TMPFILE}
+ret_val=0
+if [ ! -f %{AMANDATES} ] ; then
+ touch %{AMANDATES} >>${TMPFILE} 2>&1
+ ret_val=$?
+ if [ ${ret_val} -eq 0 ]; then
+ echo "`date +'%b %e %Y %T'`: The file '%{AMANDATES}' has been created." >>${TMPFILE}
+ fi
+fi
+if [ ${ret_val} -eq 0 ]; then
+ echo "`date +'%b %e %Y %T'`: Ensuring correct permissions for '%{AMANDATES}'." >>${TMPFILE}
+ chown %{amanda_user}:%{amanda_group} %{AMANDATES} >>${TMPFILE} 2>&1
+ chmod 0640 %{AMANDATES} >>${TMPFILE} 2>&1
+fi
+if [ ${ret_val} -eq 0 ]; then
+ echo "`date +'%b %e %Y %T'`: '%{AMANDATES}' Installation successful." >>${TMPFILE}
+ cat ${TMPFILE}
+ cat ${TMPFILE} >>${INSTALL_LOG}
+else
+ echo "`date +'%b %e %Y %T'`: '%{AMANDATES}' Installation failed." >>${TMPFILE}
+ cat ${TMPFILE}
+ cat ${TMPFILE} >>${INSTALL_ERR}
+fi
+
+# Install .amandahosts to client
+echo "`date +'%b %e %Y %T'`: Checking '%{AMANDAHOMEDIR}/.amandahosts' file." >${TMPFILE}
+if [ ! -f %{AMANDAHOMEDIR}/.amandahosts ] ; then
+ touch %{AMANDAHOMEDIR}/.amandahosts >>${TMPFILE} 2>&1
+fi
+for host in localhost localhost.localdomain ; do
+ if [ -z "`grep \"^${host}[[:blank:]]\+\" %{AMANDAHOMEDIR}/.amandahosts | grep \"[[:blank:]]\+%{amanda_user}[[:blank:]]\+amdump\"`" ] ; then
+ echo "${host} %{amanda_user} amdump" >>%{AMANDAHOMEDIR}/.amandahosts
+ fi
+done
+chown %{amanda_user}:%{amanda_group} %{AMANDAHOMEDIR}/.amandahosts >>${TMPFILE} 2>&1
+chmod 0600 %{AMANDAHOMEDIR}/.amandahosts >>${TMPFILE} 2>&1
+cat ${TMPFILE}
+cat ${TMPFILE} >>${INSTALL_LOG}
+
+# Install amanda client configuration file
+echo "`date +'%b %e %Y %T'`: Checking '%{SYSCONFDIR}/amanda/amanda-client.conf' file." >${TMPFILE}
+if [ ! -f %{SYSCONFDIR}/amanda/amanda-client.conf ] ; then
+ cp %{AMANDAHOMEDIR}/example/amanda-client.conf %{SYSCONFDIR}/amanda/amanda-client.conf >>${TMPFILE} 2>&1
+fi
+chown %{amanda_user}:%{amanda_group} %{SYSCONFDIR}/amanda/amanda-client.conf >>${TMPFILE} 2>&1
+chmod 0600 %{SYSCONFDIR}/amanda/amanda-client.conf >>${TMPFILE} 2>&1
+cat ${TMPFILE}
+cat ${TMPFILE} >>${INSTALL_LOG}
+
+# Install .gnupg directory
+echo "`date +'%b %e %Y %T'`: Installing '%{AMANDAHOMEDIR}/.gnupg'." >${TMPFILE}
+ret_val=0
+if [ ! -d %{AMANDAHOMEDIR}/.gnupg ] ; then
+ echo "`date +'%b %e %Y %T'`: '%{AMANDAHOMEDIR}/.gnupg' will be created." >>${TMPFILE}
+ mkdir %{AMANDAHOMEDIR}/.gnupg >>${TMPFILE} 2>&1
+ ret_val=$?
+ if [ ${ret_val} -eq 0 ]; then
+ echo "`date +'%b %e %Y %T'`: The directory '%{AMANDAHOMEDIR}/.gnupg' created successfully." >>${TMPFILE}
+ else
+ echo "`date +'%b %e %Y %T'`: The directory '%{AMANDAHOMEDIR}/.gnupg' creation failed." >>${TMPFILE}
+ fi
+fi
+if [ ${ret_val} -eq 0 ]; then
+ echo "`date +'%b %e %Y %T'`: Ensuring correct permissions for '%{AMANDAHOMEDIR}/.gnupg'." >>${TMPFILE}
+ chown %{amanda_user}:%{amanda_group} %{AMANDAHOMEDIR}/.gnupg >>${TMPFILE} 2>&1
+ ret_val=$?
+ if [ ${ret_val} -eq 0 ]; then
+ chmod 700 %{AMANDAHOMEDIR}/.gnupg >>${TMPFILE} 2>&1
+ ret_val=$?
+ fi
+fi
+if [ ${ret_val} -eq 0 ]; then
+ echo "`date +'%b %e %Y %T'`: '%{AMANDAHOMEDIR}/.gnupg' Installation successful." >>${TMPFILE}
+ cat ${TMPFILE}
+ cat ${TMPFILE} >>${INSTALL_LOG}
+else
+ echo "`date +'%b %e %Y %T'`: '%{AMANDAHOMEDIR}/.gnupg' Installation failed." >>${TMPFILE}
+ cat ${TMPFILE}
+ cat ${TMPFILE} >>${INSTALL_ERR}
+fi
+
+# SSH RSA key generation on client for amrecover
+KEYDIR="%{AMANDAHOMEDIR}/.ssh"
+KEYFILE="id_rsa_amrecover"
+COMMENT="root@client"
+if [ ! -d ${KEYDIR} ] ; then
+ if [ -f ${KEYDIR} ] ; then
+ echo "`date +'%b %e %Y %T'`: Directory '${KEYDIR}' exists as a file. Renaming to '${KEYDIR}.rpmsave'." >${TMPFILE}
+ mv ${KEYDIR} ${KEYDIR}.rpmsave >>${TMPFILE} 2>&1
+ cat ${TMPFILE}
+ cat ${TMPFILE} >>${INSTALL_LOG}
+ fi
+ echo "`date +'%b %e %Y %T'`: Creating directory '${KEYDIR}'." >${TMPFILE}
+ mkdir ${KEYDIR} >>${TMPFILE} 2>&1
+ cat ${TMPFILE}
+ cat ${TMPFILE} >>${INSTALL_LOG}
+fi
+if [ ! -f ${KEYDIR}/${KEYFILE} ] ; then
+ echo "`date +'%b %e %Y %T'`: Creating ssh RSA key in '${KEYDIR}/${KEYFILE}'" >${TMPFILE}
+ ssh-keygen -q -C $COMMENT -t rsa -f ${KEYDIR}/${KEYFILE} -N '' >>${TMPFILE} 2>&1
+ cat ${TMPFILE}
+ cat ${TMPFILE} >>${INSTALL_LOG}
+fi
+echo "`date +'%b %e %Y %T'`: Setting permissions for '${KEYDIR}' and '${KEYDIR}/${KEYFILE}*'" >${TMPFILE}
+chown %{amanda_user}:%{amanda_group} ${KEYDIR} >>${TMPFILE} 2>&1
+chmod 0750 ${KEYDIR} >>${TMPFILE} 2>&1
+chmod 0600 ${KEYDIR}/${KEYFILE}* >>${TMPFILE} 2>&1
+cat ${TMPFILE}
+cat ${TMPFILE} >>${INSTALL_LOG}
+
+# environment variables (~amandabackup/.profile)
+echo "`date +'%b %e %Y %T'`: Checking for '%{AMANDAHOMEDIR}/.profile' and ensuring correct environment." >${TMPFILE}
+if [ ! -f %{AMANDAHOMEDIR}/.profile ] ; then
+ touch %{AMANDAHOMEDIR}/.profile >>${TMPFILE} 2>&1
+fi
+if [ -z "`grep PATH %{AMANDAHOMEDIR}/.profile | grep '%{SBINDIR}'`" ] ; then
+ echo "export PATH=\"\$PATH:%{SBINDIR}\"" >>%{AMANDAHOMEDIR}/.profile 2>>${TMPFILE}
+fi
+cat ${TMPFILE}
+cat ${TMPFILE} >>${INSTALL_LOG}
+echo "`date +'%b %e %Y %T'`: Setting ownership and permissions for '%{AMANDAHOMEDIR}/.profile'" >${TMPFILE}
+chown %{amanda_user}:%{amanda_group} %{AMANDAHOMEDIR}/.profile >>${TMPFILE} 2>&1
+chmod 0640 %{AMANDAHOMEDIR}/.profile >>${TMPFILE} 2>&1
+cat ${TMPFILE}
+cat ${TMPFILE} >>${INSTALL_LOG}
+
+echo "`date +'%b %e %Y %T'`: Sending anonymous distribution and version information to Zmanda" >> ${INSTALL_LOG}
+if [ -x /usr/bin/wget ]; then
+ /usr/bin/wget -q -o /dev/null -O - --timeout=5 http://www.zmanda.com/amanda-tips.php\?version=%{amanda_version}\&os=%{disttag}%{distver}\&type=client
+fi
+
+echo "`date +'%b %e %Y %T'`: === Amanda backup client installation complete. ===" >>${TMPFILE}
+cat ${TMPFILE}
+cat ${TMPFILE} >>${INSTALL_LOG}
+
+if [ -f "${TMPFILE}" ]; then
+ rm -f "${TMPFILE}"
+fi
+
+echo "Amanda installation log can be found in '${INSTALL_LOG}' and errors (if any) in '${INSTALL_ERR}'."
+%postun backup_client
+/sbin/ldconfig
+
+# --- Files to install ---
+# Notes: Do not use wildcards on directories not wholly owned by amanda. An
+# uninstall of the software will attempt to delete whatever matches here.
+%files backup_client
+%defattr(0755,%{amanda_user},%{amanda_group},0755)
+%{AMLIBEXECDIR}
+%{AMLIBDIR}
+%{PERLSITELIB}/auto/Amanda
+%defattr(4750,root,disk)
+%{AMLIBEXECDIR}/application/amgtar
+%{AMLIBEXECDIR}/application/amstar
+%{AMLIBEXECDIR}/calcsize
+%{AMLIBEXECDIR}/killpgrp
+%{AMLIBEXECDIR}/rundump
+%{AMLIBEXECDIR}/runtar
+%defattr(0750,%{amanda_user},%{amanda_group},0750)
+%{LOGDIR}
+%{SBINDIR}/amaespipe
+%{SBINDIR}/amcryp*
+%{SBINDIR}/amgpgcrypt
+%{SBINDIR}/amoldrecover
+%{SBINDIR}/amrecover
+%{SYSCONFDIR}/amanda
+%defattr(0644,%{amanda_user},%{amanda_group},0755)
+%{LOCALSTATEDIR}/amanda
+%{PERLSITELIB}/Amanda
+%{AMLIBEXECDIR}/amcat.awk
+%{AMANDAHOMEDIR}/gnutar-lists
+%doc %{AMANDAHOMEDIR}/amanda-release
+%doc %{AMANDAHOMEDIR}/example/xinetd.amandaclient
+%doc %{AMANDAHOMEDIR}/example/xinetd.amandaserver
+%doc %{AMANDAHOMEDIR}/example/amanda-client.conf
+%doc %{AMANDAHOMEDIR}/template.d/README
+%doc %{AMANDAHOMEDIR}/template.d/dumptypes
+%defattr(0644,root,root,0755)
+%docdir %{MANDIR}
+%{MANDIR}/man5/amanda.conf.5.gz
+%{MANDIR}/man5/amanda-client.conf.5.gz
+%{MANDIR}/man7/amanda-devices.7.gz
+%{MANDIR}/man7/amanda-applications.7.gz
+%{MANDIR}/man7/amanda-scripts.7.gz
+%{MANDIR}/man8/amaespipe.8.gz
+%{MANDIR}/man8/amanda.8.gz
+%{MANDIR}/man8/amcheckdump.8.gz
+%{MANDIR}/man8/amcrypt*
+%{MANDIR}/man8/amgpgcrypt.8.gz
+%{MANDIR}/man8/amrecover.8.gz
+%doc %{DATADIR}/amanda
+
+%files backup_server
+%defattr(0755,%{amanda_user},%{amanda_group})
+%{AMLIBEXECDIR}
+%{AMLIBDIR}
+%{PERLSITELIB}/Amanda
+%{PERLSITELIB}/auto/Amanda
+%{AMANDAHOMEDIR}
+%{LOCALSTATEDIR}/amanda
+%{SBINDIR}/am*
+%defattr(4750,root,disk)
+%{AMLIBEXECDIR}/application/amgtar
+%{AMLIBEXECDIR}/application/amstar
+%{AMLIBEXECDIR}/calcsize
+%{AMLIBEXECDIR}/killpgrp
+%{AMLIBEXECDIR}/rundump
+%{AMLIBEXECDIR}/runtar
+%{AMLIBEXECDIR}/dumper
+%{AMLIBEXECDIR}/planner
+%{SBINDIR}/amcheck
+%{SBINDIR}/amservice
+%defattr(0750,%{amanda_user},%{amanda_group},0750)
+%{LOGDIR}
+%{SYSCONFDIR}/amanda
+# Files in standard dirs must be listed explicitly
+%{SBINDIR}/activate-devpay
+%{SBINDIR}/amaespipe
+%{SBINDIR}/amcrypt
+%{SBINDIR}/amcrypt-ossl
+%{SBINDIR}/amcrypt-ossl-asym
+%{SBINDIR}/amcryptsimple
+%{SBINDIR}/amgpgcrypt
+%{SBINDIR}/amoldrecover
+%{SBINDIR}/amrecover
+%defattr(0644,%{amanda_user},%{amanda_group})
+%{AMLIBEXECDIR}/amcat.awk
+%{AMLIBEXECDIR}/amplot.awk
+%{AMLIBEXECDIR}/amplot.g
+%{AMLIBEXECDIR}/amplot.gp
+%doc %{AMANDAHOMEDIR}/amanda-release
+%docdir %{AMANDAHOMEDIR}/example
+%docdir %{AMANDAHOMEDIR}/template.d
+%defattr(0644,root,root,0755)
+%docdir %{MANDIR}
+%{MANDIR}/man5/am*
+%{MANDIR}/man5/disklist.5.gz
+%{MANDIR}/man5/tapelist.5.gz
+%{MANDIR}/man7/am*
+%{MANDIR}/man8/am*
+%{MANDIR}/man8/script-email.8.gz
+%doc %{DATADIR}/amanda
+
+# --- ChangeLog
+
+%changelog
+* Fri Aug 20 2010 Dan Locks <dwlocks at zmanda dot com> 3.2.0alpha
+- use %%VERSION%% macro instead of reading a file. error reported by ssgelm
+* Thu Aug 19 2010 Dan Locks <dwlocks at zmanda dot com> 3.2.0alpha
+- Added detection of openSuSE 11 as suggested by ssgelm
projects / debian / amanda / blobdiff