Fix process-specific values in nickle-generated footprints

[hw/altusmetrum] / packages / ap.10g.5c

diff --git a/packages/ap.10g.5c b/packages/ap.10g.5c
index e69588e47ac41fb7702148455e2ce0e128698dce..f7435e59017319192a95a99d167bc0714fd25377 100644 (file)
--- a/packages/ap.10g.5c
+++ b/packages/ap.10g.5c
@@ -41,7 +41,7 @@ real  h_pad_y = 0 + h_pad_height / 2;
 
 real   feed_width = 2.1;
 real   feed_height = 1.25;
-real   feed_clear = 0.5;
+real   feed_space = 0.5;
 real   feed_x = 0;
 real   feed_y = feed_height / 2;
 
@@ -49,36 +49,36 @@ real        line_width = 1.29;
 real   line_height = 2;
 real   line_x = 0;
 real   line_y = feed_y + line_height/2;
-real   line_clear = feed_clear;
+real   line_space = feed_space;
 
 /* Center point is at the "top" of the feed pad */
 
 /* Draw a line at the edge of the board for alignment */
 
 real   mark_y = -edge_y + mils1002mm(line_thickness) / 2;
-                                                     
+
 line(-hole_x, mark_y, hole_x, mark_y);
 
 /* alignment holes */
-pin_mm_clear(-hole_x, -hole_y, hole_diameter, .35, 0.35, "2", "2");
-pin_mm_clear(hole_x, -hole_y, hole_diameter, .35, 0.35, "2", "2");
+pin_mm_options(-hole_x, -hole_y, hole_diameter, process_ring, "2", "2", "via");
+pin_mm_options( hole_x, -hole_y, hole_diameter, process_ring, "2", "2", "via");
 
 /* vertical pads */
 
-pad_mm_clear(-v_pad_x, -v_pad_y, v_pad_width, v_pad_height, 0, "2", "2");
-pad_mm_clear( v_pad_x, -v_pad_y, v_pad_width, v_pad_height, 0, "2", "2");
+pad_mm_space(-v_pad_x, -v_pad_y, v_pad_width, v_pad_height, 0, "2", "2");
+pad_mm_space( v_pad_x, -v_pad_y, v_pad_width, v_pad_height, 0, "2", "2");
 
 /* horizontal pads */
 
-pad_mm_clear(-h_pad_x,  h_pad_y, h_pad_width, h_pad_height, 0, "2", "2");
-pad_mm_clear( h_pad_x,  h_pad_y, h_pad_width, h_pad_height, 0, "2", "2");
+pad_mm_space(-h_pad_x,  h_pad_y, h_pad_width, h_pad_height, 0, "2", "2");
+pad_mm_space( h_pad_x,  h_pad_y, h_pad_width, h_pad_height, 0, "2", "2");
 
 /* feed pad */
 
-pad_mm_clear (feed_x,  feed_y, feed_width, feed_height, feed_clear, "1", "1");
+pad_mm_space (feed_x,  feed_y, feed_width, feed_height, feed_space, "1", "1");
 
 /* feed line */
 
-pad_mm_clear (line_x,  line_y, line_width, line_height, line_clear, "1", "1");
+pad_mm_space (line_x,  line_y, line_width, line_height, line_space, "1", "1");
 
 element_end();