Use altusmetrum packages/symbols. Fix vendor parts. Switch to CC1200

[hw/telelco] / packages / 0603diode.fp

diff --git a/packages/0603diode.fp b/packages/0603diode.fp
deleted file mode 100644 (file)
index 331ea1c..0000000
--- a/packages/0603diode.fp
+++ /dev/null
@@ -1,36 +0,0 @@
-       # grab the input values and convert to 1/100 mil
-       # how much to grow the pads by for soldermask [1/100 mil]
-       # clearance from planes [1/100 mil]
-       # silk screen width  [1/100 mil]
-       # courtyard silk screen width  [1/100 mil]
-# element_flags, description, pcb-name, value, mark_x, mark_y,
-# text_x, text_y, text_direction, text_scale, text_flags
-Element[0x00000000 "Standard SMT resistor, capacitor etc" "" "0603" 0 0 -3150 -3150 0 100 ""]
-(
-# 
-# Pad[x1, y1, x2, y2, thickness, clearance, mask, name , pad number, flags]
-       Pad[-2559 -492
-               -2559 492
-               2952 2000 3552 "1" "1" "square"]
-           Pad[2559 -492
-               2559 492
-               2952 2000 3552 "2" "2" "square"]
-
-#   ElementLine[ -4300 -2300 -4300 2300 1000 ]
-#   ElementLine[ -4300 2300 4500 2300 1000 ]
-#   ElementLine[ 4500 2300 4500 -2300 1000 ]
-#   ElementLine[ 4500 -2300 -4300 -2300 1000 ]
-   ElementLine[ 4700 2500 4700 -2500 1000 ]
-   ElementLine[ 4700 2500 3700 2500 1000 ]
-   ElementLine[ 4700 -2500 3700 -2500 1000 ]
-
-#
-# This draws a 1 mil placement courtyard outline in silk.  It should probably
-# not be included since you wont want to try and fab a 1 mil silk line.  Then
-# again, it is most useful during parts placement.  It really is time for some
-# additional non-fab layers...
-#      ElementLine[eval(-1*V1/2) eval(-1*V2/2) eval(-1*V1/2) eval(   V2/2) CYW]
-#      ElementLine[eval(-1*V1/2) eval(-1*V2/2) eval(   V1/2) eval(-1*V2/2) CYW]
-#      ElementLine[eval(   V1/2) eval(   V2/2) eval(   V1/2) eval(-1*V2/2) CYW]
-#      ElementLine[eval(   V1/2) eval(   V2/2) eval(-1*V1/2) eval(   V2/2) CYW]
-)