.\" Title: amlabel
-.\" Author:
-.\" Generator: DocBook XSL Stylesheets v1.72.0 <http://docbook.sf.net/>
-.\" Date: 06/06/2007
-.\" Manual:
-.\" Source:
+.\" Author: James da Silva <jds@amanda.org>
+.\" Generator: DocBook XSL Stylesheets v1.74.0 <http://docbook.sf.net/>
+.\" Date: 01/22/2009
+.\" Manual: System Administration Commands
+.\" Source: Amanda 2.6.1
+.\" Language: English
.\"
-.TH "AMLABEL" "8" "06/06/2007" "" ""
+.TH "AMLABEL" "8" "01/22/2009" "Amanda 2\&.6\&.1" "System Administration Commands"
+.\" -----------------------------------------------------------------
+.\" * (re)Define some macros
+.\" -----------------------------------------------------------------
+.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+.\" toupper - uppercase a string (locale-aware)
+.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+.de toupper
+.tr aAbBcCdDeEfFgGhHiIjJkKlLmMnNoOpPqQrRsStTuUvVwWxXyYzZ
+\\$*
+.tr aabbccddeeffgghhiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz
+..
+.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+.\" SH-xref - format a cross-reference to an SH section
+.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+.de SH-xref
+.ie n \{\
+.\}
+.toupper \\$*
+.el \{\
+\\$*
+.\}
+..
+.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+.\" SH - level-one heading that works better for non-TTY output
+.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+.de1 SH
+.\" put an extra blank line of space above the head in non-TTY output
+.if t \{\
+.sp 1
+.\}
+.sp \\n[PD]u
+.nr an-level 1
+.set-an-margin
+.nr an-prevailing-indent \\n[IN]
+.fi
+.in \\n[an-margin]u
+.ti 0
+.HTML-TAG ".NH \\n[an-level]"
+.it 1 an-trap
+.nr an-no-space-flag 1
+.nr an-break-flag 1
+\." make the size of the head bigger
+.ps +3
+.ft B
+.ne (2v + 1u)
+.ie n \{\
+.\" if n (TTY output), use uppercase
+.toupper \\$*
+.\}
+.el \{\
+.nr an-break-flag 0
+.\" if not n (not TTY), use normal case (not uppercase)
+\\$1
+.in \\n[an-margin]u
+.ti 0
+.\" if not n (not TTY), put a border/line under subheading
+.sp -.6
+\l'\n(.lu'
+.\}
+..
+.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+.\" SS - level-two heading that works better for non-TTY output
+.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+.de1 SS
+.sp \\n[PD]u
+.nr an-level 1
+.set-an-margin
+.nr an-prevailing-indent \\n[IN]
+.fi
+.in \\n[IN]u
+.ti \\n[SN]u
+.it 1 an-trap
+.nr an-no-space-flag 1
+.nr an-break-flag 1
+.ps \\n[PS-SS]u
+\." make the size of the head bigger
+.ps +2
+.ft B
+.ne (2v + 1u)
+.if \\n[.$] \&\\$*
+..
+.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+.\" BB/BE - put background/screen (filled box) around block of text
+.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+.de BB
+.if t \{\
+.sp -.5
+.br
+.in +2n
+.ll -2n
+.gcolor red
+.di BX
+.\}
+..
+.de EB
+.if t \{\
+.if "\\$2"adjust-for-leading-newline" \{\
+.sp -1
+.\}
+.br
+.di
+.in
+.ll
+.gcolor
+.nr BW \\n(.lu-\\n(.i
+.nr BH \\n(dn+.5v
+.ne \\n(BHu+.5v
+.ie "\\$2"adjust-for-leading-newline" \{\
+\M[\\$1]\h'1n'\v'+.5v'\D'P \\n(BWu 0 0 \\n(BHu -\\n(BWu 0 0 -\\n(BHu'\M[]
+.\}
+.el \{\
+\M[\\$1]\h'1n'\v'-.5v'\D'P \\n(BWu 0 0 \\n(BHu -\\n(BWu 0 0 -\\n(BHu'\M[]
+.\}
+.in 0
+.sp -.5v
+.nf
+.BX
+.in
+.sp .5v
+.fi
+.\}
+..
+.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+.\" BM/EM - put colored marker in margin next to block of text
+.\" ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+.de BM
+.if t \{\
+.br
+.ll -2n
+.gcolor red
+.di BX
+.\}
+..
+.de EM
+.if t \{\
+.br
+.di
+.ll
+.gcolor
+.nr BH \\n(dn
+.ne \\n(BHu
+\M[\\$1]\D'P -.75n 0 0 \\n(BHu -(\\n[.i]u - \\n(INu - .75n) 0 0 -\\n(BHu'\M[]
+.in 0
+.nf
+.BX
+.in
+.fi
+.\}
+..
+.\" -----------------------------------------------------------------
+.\" * set default formatting
+.\" -----------------------------------------------------------------
.\" disable hyphenation
.nh
.\" disable justification (adjust text to left margin only)
.ad l
-.SH "NAME"
-amlabel \- label an Amanda tape
-.SH "SYNOPSIS"
-.HP 8
+.\" -----------------------------------------------------------------
+.\" * MAIN CONTENT STARTS HERE *
+.\" -----------------------------------------------------------------
+.SH "Name"
+amlabel \- label an \fIAmanda\fR tape
+.SH "Synopsis"
+.fam C
+.HP \w'\fBamlabel\fR\ 'u
\fBamlabel\fR [\-f] \fIconfig\fR \fIlabel\fR [slot\ \fIslot\fR] [\-o\ \fIconfigoption\fR]...
+.fam
.SH "DESCRIPTION"
.PP
All
\fIAmanda\fR
-tapes must be pre\-labeled before they are used.
+tapes must be pre\-labeled before they are used\&.
\fIAmanda\fR
verifies the label in
\fBamdump\fR
and
\fBamflush\fR
-before writing to make sure the proper tape is loaded.
+before writing to make sure the proper tape is loaded\&.
.PP
\fBAmlabel\fR
writes an
\fIAmanda\fR
label on the tape in the device specified by the
-\fIamanda.conf\fR
-file in /usr/local/etc/amanda/\fIconfig\fR.
+\fIamanda\&.conf\fR
+file in /usr/local/etc/amanda/\fIconfig\fR\&.
\fILabel\fR
may be any string that does not contain whitespace and that matches the
-\fIamanda.conf\fR
+\fIamanda\&.conf\fR
\fBlabelstr\fR
-regular expression option. It is up to the system administrator to define a naming convention.
+regular expression option\&. It is up to the system administrator to define a naming convention\&.
.PP
\fBAmlabel\fR
appends the new tape to the
-\fItapelist\fR
+\fBtapelist\fR(5)
file so it will be used by
\fIAmanda\fR
-before it reuses any other tapes. When you
+before it reuses any other tapes\&. When you
\fBamlabel\fR
multiple tapes, they will be used in the order you
\fBamlabel\fR
-them.
+them\&.
.PP
\fBAmlabel\fR
will not write the label if the tape contains an active
\fIAmanda\fR
-tape or if the label specified is on an active tape. The
+tape or if the label specified is on an active tape\&. The
\fB\-f\fR
-(force) flag bypasses these verifications.
+(force) flag bypasses these verifications\&.
.PP
An optional
\fIslot\fR
-may be specified after the tape label. If a tape changer is in use,
+may be specified after the tape label\&. If a tape changer is in use,
\fBamlabel\fR
-will label the tape in the specified slot instead of the currently loaded tape.
+will label the tape in the specified slot instead of the currently loaded tape\&.
.PP
See the
\fBamanda\fR(8)
man page for more details about
-\fIAmanda\fR.
+\fIAmanda\fR\&.
.SH "OPTIONS"
.PP
\fB\-o\fR \fIconfigoption\fR
.RS 4
See the "\fBCONFIGURATION OVERRIDE\fR" section in
-\fBamanda\fR(8).
+\fBamanda\fR(8)\&.
.RE
.SH "EXAMPLE"
.PP
\fIAmanda\fR
label with the string "DMP000" on the tape loaded in the device named in the
\fBtapedev\fR
-option in /usr/local/etc/amanda/daily/amanda.conf:
-.sp
-.RS 4
+option in /usr/local/etc/amanda/daily/amanda\&.conf:
.nf
% amlabel daily DMP000
.fi
-.RE
.PP
Label the tape in slot 3 of the currently configured tape changer with the string "DMP003":
-.sp
-.RS 4
.nf
% amlabel daily DMP003 slot 3
.fi
-.RE
.SH "MESSAGES"
.PP
-label \fIlabel\fR doesn't match labelstr \fIstr\fR
+label \fIlabel\fR doesn\'t match labelstr \fIstr\fR
.RS 4
Label
\fIlabel\fR
regular expression
\fIstr\fR
from
-\fIamanda.conf\fR.
+\fIamanda\&.conf\fR\&.
.RE
.PP
label \fIlabel\fR already on a tape
\fIlabel\fR
is already listed as an active
\fIAmanda\fR
-tape.
+tape\&.
.RE
.PP
no tpchanger specified in \fIpath\fR , so slot command invalid
The command line has the
\fBslot\fR
parameter but the
-\fIamanda.conf\fR
+\fIamanda\&.conf\fR
file in
\fIpath\fR
-does not have a tape changer configured.
+does not have a tape changer configured\&.
.RE
.PP
reading label \fIlabel\fR, tape is in another amanda configuration
\fBlabelstr\fR
for this configuration so it is probably part of a different
\fIAmanda\fR
-configuration.
+configuration\&.
.RE
.PP
reading label \fIlabel\fR, tape is active
\fIlabel\fR
appears to already be part of this
\fIAmanda\fR
-configuration and active, i.e. has valid data on it.
+configuration and active, i\&.e\&. has valid data on it\&.
.RE
.PP
no label found, are you sure \fItape\fR is non\-rewinding?
got an error that might be caused by mis\-configuring
\fIAmanda\fR
with a rewinding tape device name instead of a non\-rewinding device name for
-\fItape.\fR
+\fItape\&.\fR
.RE
-.SH "AUTHOR"
+.SH "SEE ALSO"
.PP
-James da Silva,
-<jds@amanda.org>: Original text
+\fBamanda\fR(8),
+\fBamdump\fR(8),
+\fBamflush\fR(8),
+: http://wiki.zmanda.com
+.SH "Authors"
.PP
-Stefan G. Weichinger,
-<sgw@amanda.org>, maintainer of the
-\fIAmanda\fR\-documentation: XML\-conversion
-.SH "SEE ALSO"
+\fBJames da Silva\fR <\&jds@amanda\&.org\&>
.PP
-\fBamanda\fR(8)
-\fBamdump\fR(8)
-\fBamflush\fR(8)
+\fBStefan G\&. Weichinger\fR <\&sgw@amanda\&.org\&>
projects / debian / amanda / blobdiff