# Contact information: Zmanda Inc, 465 S. Mathilda Ave., Suite 300
# Sunnyvale, CA 94086, USA, or: http://www.zmanda.com
-use Test::More tests => 172;
+use Test::More tests => 269;
+use strict;
+use warnings;
use lib '@amperldir@';
use Installcheck::Run;
cleanup_taper();
unless ($params{'keep_config'}) {
- my $testconf = Installcheck::Run::setup();
+ my $testconf;
+ if ($params{'new_vtapes'}) {
+ $testconf = Installcheck::Run::setup(1);
+ } else {
+ $testconf = Installcheck::Run::setup();
+ }
$testconf->add_param('autolabel', '"TESTCONF%%" empty volume_error');
if ($params{'notapedev'}) {
$testconf->remove_param('tapedev');
$ndmp->reset();
$ndmp->config($testconf);
}
+ unless ($params{'leom'} or $params{'ndmp_server'}) {
+ $testconf->add_param('device_property', '"LEOM" "OFF"');
+ }
+ $testconf->add_param('debug_taper', '9'); ## TEMPORARY
$testconf->add_tapetype('TEST-TAPE', [
'length' => "$length",
]);
+ if ($params{'taperscan'}) {
+ $testconf->add_param('taperscan', "\"$params{'taperscan'}\"");
+ $testconf->add_taperscan($params{'taperscan'}, [
+ 'comment' => '"my taperscan is mine, not yours"',
+ 'plugin' => "\"$params{'taperscan'}\"",
+ ]);
+
+ }
$testconf->write();
}
$taper_reply_timeout = 120;
}
- taper_cmd("START-TAPER $datestamp");
+ taper_cmd("START-TAPER worker0 $datestamp");
}
sub wait_for_exit {
close($logfile);
while (@logfile and @$expected) {
- $logline = shift @logfile;
- $expline = shift @$expected;
+ my $logline = shift @logfile;
+ my $expline = shift @$expected;
chomp $logline;
if ($logline !~ $expline) {
like($logline, $expline, $msg);
$hdr->{'program'} = "INSTALLCHECK";
$hdr = $hdr->to_string(32768,32768);
- $fh->write($hdr);
+ $fh->syswrite($hdr, 32768);
}
sub write_dumpfile_data_to {
my ($port_cmd, $size, $hostname, $disk, $expect_error) = @_;
my ($header_port, $data_addr) =
- ($last_taper_reply =~ /^PORT (\d+) "?(\d+\.\d+\.\d+\.\d+:\d+)/);
+ ($last_taper_reply =~ /^PORT worker0 $handle (\d+) "?(\d+\.\d+\.\d+\.\d+:\d+)/);
# just run this in the child
return unless fork() == 0;
$handle = "11-11111";
$datestamp = "20070102030405";
run_taper(4096, "single-part and multipart FILE-WRITE");
-like(taper_reply, qr/^TAPER-OK$/,
+like(taper_reply, qr/^TAPER-OK worker0$/,
"got TAPER-OK") or die;
make_holding_file(1024*1024, "localhost", "/home");
-taper_cmd("FILE-WRITE $handle \"$test_filename\" localhost /home 0 $datestamp 0 12");
+taper_cmd("FILE-WRITE worker0 $handle \"$test_filename\" localhost /home 0 $datestamp \"\" \"\" \"\" \"\" \"\" \"\" \"\" \"\" 12");
like(taper_reply, qr/^REQUEST-NEW-TAPE $handle$/,
- "got REQUEST-NEW-TAPE") or die;
-taper_cmd("NEW-TAPE");
+ "got REQUEST-NEW-TAPE worker0 $handle") or die;
+taper_cmd("START-SCAN worker0 $handle");
+taper_cmd("NEW-TAPE worker0 $handle");
like(taper_reply, qr/^NEW-TAPE $handle TESTCONF01$/,
- "got proper NEW-TAPE") or die;
-like(taper_reply, qr/^PARTDONE $handle TESTCONF01 1 1024 "\[sec [\d.]+ kb 1024 kps [\d.]+ orig-kb 12\]"$/,
+ "got proper NEW-TAPE worker0 $handle") or die;
+like(taper_reply, qr/^PARTDONE $handle TESTCONF01 1 1024 "\[sec [\d.]+ bytes 1048576 kps [\d.]+ orig-kb 12\]"$/,
"got PARTDONE") or die;
-like(taper_reply, qr/^DONE $handle INPUT-GOOD TAPE-GOOD "\[sec [\d.]+ kb 1024 kps [\d.]+ orig-kb 12\]" "" ""$/,
+like(taper_reply, qr/^DONE $handle INPUT-GOOD TAPE-GOOD "\[sec [\d.]+ bytes 1048576 kps [\d.]+ orig-kb 12\]" "" ""$/,
"got DONE") or die;
##
$handle = '11-22222';
make_holding_file(1024*1024, "localhost", "/usr");
-taper_cmd("FILE-WRITE $handle \"$test_filename\" localhost /usr 0 $datestamp 524288 512");
-like(taper_reply, qr/^PARTDONE $handle TESTCONF01 2 512 "\[sec [\d.]+ kb 512 kps [\d.]+ orig-kb 512\]"$/,
+taper_cmd("FILE-WRITE worker0 $handle \"$test_filename\" localhost /usr 0 $datestamp 524288 \"\" \"\" 1 \"\" \"\" \"\" \"\" 512");
+like(taper_reply, qr/^PARTDONE $handle TESTCONF01 2 512 "\[sec [\d.]+ bytes 524288 kps [\d.]+ orig-kb 512\]"$/,
"got PARTDONE for filenum 2") or die;
-like(taper_reply, qr/^PARTDONE $handle TESTCONF01 3 512 "\[sec [\d.]+ kb 512 kps [\d.]+ orig-kb 512\]"$/,
+like(taper_reply, qr/^PARTDONE $handle TESTCONF01 3 512 "\[sec [\d.]+ bytes 524288 kps [\d.]+ orig-kb 512\]"$/,
"got PARTDONE for filenum 3") or die;
-like(taper_reply, qr/^DONE $handle INPUT-GOOD TAPE-GOOD "\[sec [\d.]+ kb 1024 kps [\d.]+ orig-kb 512\]" "" ""$/,
+like(taper_reply, qr/^DONE $handle INPUT-GOOD TAPE-GOOD "\[sec [\d.]+ bytes 1048576 kps [\d.]+ orig-kb 512\]" "" ""$/,
"got DONE") or die;
taper_cmd("QUIT");
wait_for_exit();
check_logs([
- qr(^INFO taper Will write new label `TESTCONF01' to new tape$),
+ qr(^INFO taper Slot 1 without label can be labeled$),
qr(^START taper datestamp $datestamp label TESTCONF01 tape 1$),
- qr(^PART taper TESTCONF01 1 localhost /home $datestamp 1/-1 0 \[sec [\d.]+ kb 1024 kps [\d.]+ orig-kb 12\]$),
- qr(^DONE taper localhost /home $datestamp 1 0 \[sec [\d.]+ kb 1024 kps [\d.]+ orig-kb 12\]$),
- qr(^PART taper TESTCONF01 2 localhost /usr $datestamp 1/-1 0 \[sec [\d.]+ kb 512 kps [\d.]+ orig-kb 512\]$),
- qr(^PART taper TESTCONF01 3 localhost /usr $datestamp 2/-1 0 \[sec [\d.]+ kb 512 kps [\d.]+ orig-kb 512\]$),
- qr(^DONE taper localhost /usr $datestamp 2 0 \[sec [\d.]+ kb 1024 kps [\d.]+ orig-kb 512\]$),
+ qr(^PART taper TESTCONF01 1 localhost /home $datestamp 1/-1 0 \[sec [\d.]+ bytes 1048576 kps [\d.]+ orig-kb 12\]$),
+ qr(^DONE taper localhost /home $datestamp 1 0 \[sec [\d.]+ bytes 1048576 kps [\d.]+ orig-kb 12\]$),
+ qr(^PART taper TESTCONF01 2 localhost /usr $datestamp 1/-1 0 \[sec [\d.]+ bytes 524288 kps [\d.]+ orig-kb 512\]$),
+ qr(^PART taper TESTCONF01 3 localhost /usr $datestamp 2/-1 0 \[sec [\d.]+ bytes 524288 kps [\d.]+ orig-kb 512\]$),
+ qr(^DONE taper localhost /usr $datestamp 2 0 \[sec [\d.]+ bytes 1048576 kps [\d.]+ orig-kb 512\]$),
qr(^INFO taper tape TESTCONF01 kb 2048 fm 4 \[OK\]$),
], "single-part and multi-part dump logged correctly");
$handle = "11-33333";
$datestamp = "19780615010203";
run_taper(4096, "multipart PORT-WRITE");
-like(taper_reply, qr/^TAPER-OK$/,
+like(taper_reply, qr/^TAPER-OK worker0$/,
"got TAPER-OK") or die;
-taper_cmd("PORT-WRITE $handle localhost /var 0 $datestamp 524288 NULL 393216");
-like(taper_reply, qr/^PORT (\d+) "?(\d+\.\d+\.\d+\.\d+:\d+;?)+"?$/,
+taper_cmd("PORT-WRITE worker0 $handle localhost /var 0 $datestamp 524288 \"\" 393216 1 0 \"\" \"\" 0 AMANDA");
+like(taper_reply, qr/^PORT worker0 $handle (\d+) "?(\d+\.\d+\.\d+\.\d+:\d+;?)+"?$/,
"got PORT with data address");
write_to_port($last_taper_reply, 63*32768, "localhost", "/var", 0);
like(taper_reply, qr/^REQUEST-NEW-TAPE $handle$/,
- "got REQUEST-NEW-TAPE") or die;
-taper_cmd("NEW-TAPE");
+ "got REQUEST-NEW-TAPE worker0 $handle") or die;
+taper_cmd("START-SCAN worker0 $handle");
+taper_cmd("NEW-TAPE worker0 $handle");
like(taper_reply, qr/^NEW-TAPE $handle TESTCONF01$/,
- "got proper NEW-TAPE") or die;
-like(taper_reply, qr/^PARTDONE $handle TESTCONF01 1 384 "\[sec [\d.]+ kb 384 kps [\d.]+\]"$/,
+ "got proper NEW-TAPE worker0 $handle") or die;
+like(taper_reply, qr/^PARTDONE $handle TESTCONF01 1 384 "\[sec [\d.]+ bytes 393216 kps [\d.]+\]"$/,
"got PARTDONE for filenum 1") or die;
-like(taper_reply, qr/^PARTDONE $handle TESTCONF01 2 384 "\[sec [\d.]+ kb 384 kps [\d.]+\]"$/,
+like(taper_reply, qr/^PARTDONE $handle TESTCONF01 2 384 "\[sec [\d.]+ bytes 393216 kps [\d.]+\]"$/,
"got PARTDONE for filenum 2") or die;
-like(taper_reply, qr/^PARTDONE $handle TESTCONF01 3 384 "\[sec [\d.]+ kb 384 kps [\d.]+\]"$/,
+like(taper_reply, qr/^PARTDONE $handle TESTCONF01 3 384 "\[sec [\d.]+ bytes 393216 kps [\d.]+\]"$/,
"got PARTDONE for filenum 3") or die;
-like(taper_reply, qr/^PARTDONE $handle TESTCONF01 4 384 "\[sec [\d.]+ kb 384 kps [\d.]+\]"$/,
+like(taper_reply, qr/^PARTDONE $handle TESTCONF01 4 384 "\[sec [\d.]+ bytes 393216 kps [\d.]+\]"$/,
"got PARTDONE for filenum 4") or die;
-like(taper_reply, qr/^PARTDONE $handle TESTCONF01 5 384 "\[sec [\d.]+ kb 384 kps [\d.]+\]"$/,
+like(taper_reply, qr/^PARTDONE $handle TESTCONF01 5 384 "\[sec [\d.]+ bytes 393216 kps [\d.]+\]"$/,
"got PARTDONE for filenum 5") or die;
-like(taper_reply, qr/^PARTDONE $handle TESTCONF01 6 96 "\[sec [\d.]+ kb 96 kps [\d.]+\]"$/,
+like(taper_reply, qr/^PARTDONE $handle TESTCONF01 6 96 "\[sec [\d.]+ bytes 98304 kps [\d.]+\]"$/,
"got PARTDONE for filenum 6") or die;
like(taper_reply, qr/^DUMPER-STATUS $handle$/,
"got DUMPER-STATUS request") or die;
-taper_cmd("DONE $handle 712");
-like(taper_reply, qr/^DONE $handle INPUT-GOOD TAPE-GOOD "\[sec [\d.]+ kb 2016 kps [\d.]+ orig-kb 712\]" "" ""$/,
+taper_cmd("DONE worker0 $handle 712");
+like(taper_reply, qr/^DONE $handle INPUT-GOOD TAPE-GOOD "\[sec [\d.]+ bytes 2064384 kps [\d.]+ orig-kb 712\]" "" ""$/,
"got DONE") or die;
taper_cmd("QUIT");
wait_for_exit();
check_logs([
- qr(^INFO taper Will write new label `TESTCONF01' to new tape$),
+ qr(^INFO taper Slot 1 without label can be labeled$),
qr(^START taper datestamp $datestamp label TESTCONF01 tape 1$),
- qr(^PART taper TESTCONF01 1 localhost /var $datestamp 1/-1 0 \[sec [\d.]+ kb 384 kps [\d.]+\]$),
- qr(^PART taper TESTCONF01 2 localhost /var $datestamp 2/-1 0 \[sec [\d.]+ kb 384 kps [\d.]+\]$),
- qr(^PART taper TESTCONF01 3 localhost /var $datestamp 3/-1 0 \[sec [\d.]+ kb 384 kps [\d.]+\]$),
- qr(^PART taper TESTCONF01 4 localhost /var $datestamp 4/-1 0 \[sec [\d.]+ kb 384 kps [\d.]+\]$),
- qr(^PART taper TESTCONF01 5 localhost /var $datestamp 5/-1 0 \[sec [\d.]+ kb 384 kps [\d.]+\]$),
- qr(^PART taper TESTCONF01 6 localhost /var $datestamp 6/-1 0 \[sec [\d.]+ kb 96 kps [\d.]+\]$),
- qr(^DONE taper localhost /var $datestamp 6 0 \[sec [\d.]+ kb 2016 kps [\d.]+ orig-kb 712\]$),
+ qr(^PART taper TESTCONF01 1 localhost /var $datestamp 1/-1 0 \[sec [\d.]+ bytes 393216 kps [\d.]+\]$),
+ qr(^PART taper TESTCONF01 2 localhost /var $datestamp 2/-1 0 \[sec [\d.]+ bytes 393216 kps [\d.]+\]$),
+ qr(^PART taper TESTCONF01 3 localhost /var $datestamp 3/-1 0 \[sec [\d.]+ bytes 393216 kps [\d.]+\]$),
+ qr(^PART taper TESTCONF01 4 localhost /var $datestamp 4/-1 0 \[sec [\d.]+ bytes 393216 kps [\d.]+\]$),
+ qr(^PART taper TESTCONF01 5 localhost /var $datestamp 5/-1 0 \[sec [\d.]+ bytes 393216 kps [\d.]+\]$),
+ qr(^PART taper TESTCONF01 6 localhost /var $datestamp 6/-1 0 \[sec [\d.]+ bytes 98304 kps [\d.]+\]$),
+ qr(^DONE taper localhost /var $datestamp 6 0 \[sec [\d.]+ bytes 2064384 kps [\d.]+ orig-kb 712\]$),
qr(^INFO taper tape TESTCONF01 kb 2016 fm 6 \[OK\]$),
], "multipart PORT-WRITE logged correctly");
$handle = "11-44444";
$datestamp = "19411207000000";
run_taper(4096, "testing NO-NEW-TAPE from the driver on 1st request");
-like(taper_reply, qr/^TAPER-OK$/,
+like(taper_reply, qr/^TAPER-OK worker0$/,
"got TAPER-OK") or die;
make_holding_file(1024*1024, "localhost", "/home");
-taper_cmd("FILE-WRITE $handle \"$test_filename\" localhost /home 0 $datestamp 0 912");
+taper_cmd("FILE-WRITE worker0 $handle \"$test_filename\" localhost /home 0 $datestamp 0 \"\" 0 1 0 \"\" \"\" 0 912");
like(taper_reply, qr/^REQUEST-NEW-TAPE $handle$/,
- "got REQUEST-NEW-TAPE") or die;
-taper_cmd("NO-NEW-TAPE sorry");
-like(taper_reply, qr/^FAILED $handle INPUT-GOOD TAPE-ERROR "" "CONFIG:sorry"?.*$/,
+ "got REQUEST-NEW-TAPE worker0 $handle") or die;
+taper_cmd("NO-NEW-TAPE worker0 $handle sorry");
+like(taper_reply, qr/^FAILED $handle INPUT-GOOD TAPE-ERROR "" "?sorry"?.*$/,
"got FAILED") or die;
taper_cmd("QUIT");
wait_for_exit();
check_logs([
- qr(^INFO taper Will write new label `TESTCONF01' to new tape$),
- qr(^ERROR taper no-tape \[CONFIG:sorry\]$),
- qr(^FAIL taper localhost /home $datestamp 0 "CONFIG:sorry"$),
+ qr(^INFO taper Slot 1 without label can be labeled$),
+ qr(^ERROR taper no-tape config \[sorry\]$),
+ qr(^FAIL taper localhost /home $datestamp 0 config sorry$),
], "NO-NEW-TAPE logged correctly");
##
$handle = "11-55555";
$datestamp = "19750711095836";
run_taper(1024, "PORT-WRITE retry on EOT (mem cache)");
-like(taper_reply, qr/^TAPER-OK$/,
+like(taper_reply, qr/^TAPER-OK worker0$/,
"got TAPER-OK") or die;
-taper_cmd("PORT-WRITE $handle localhost /usr/local 0 $datestamp 786432 NULL 786432");
-like(taper_reply, qr/^PORT (\d+) "?(\d+\.\d+\.\d+\.\d+:\d+;?)+"?$/,
+taper_cmd("PORT-WRITE worker0 $handle localhost /usr/local 0 $datestamp 786432 \"\" 786432 1 0 \"\" \"\" 0 AMANDA");
+like(taper_reply, qr/^PORT worker0 $handle (\d+) "?(\d+\.\d+\.\d+\.\d+:\d+;?)+"?$/,
"got PORT with data address");
write_to_port($last_taper_reply, 1575936, "localhost", "/usr/local", 0);
like(taper_reply, qr/^REQUEST-NEW-TAPE $handle$/,
- "got REQUEST-NEW-TAPE") or die;
-taper_cmd("NEW-TAPE");
+ "got REQUEST-NEW-TAPE worker0 $handle") or die;
+taper_cmd("START-SCAN worker0 $handle");
+taper_cmd("NEW-TAPE worker0 $handle");
like(taper_reply, qr/^NEW-TAPE $handle TESTCONF01$/,
- "got proper NEW-TAPE") or die;
-like(taper_reply, qr/^PARTDONE $handle TESTCONF01 1 768 "\[sec [\d.]+ kb 768 kps [\d.]+\]"$/,
+ "got proper NEW-TAPE worker0 $handle") or die;
+like(taper_reply, qr/^PARTDONE $handle TESTCONF01 1 768 "\[sec [\d.]+ bytes 786432 kps [\d.]+\]"$/,
"got PARTDONE for filenum 1") or die;
like(taper_reply, qr/^REQUEST-NEW-TAPE $handle$/,
- "got REQUEST-NEW-TAPE") or die;
-taper_cmd("NEW-TAPE");
+ "got REQUEST-NEW-TAPE worker0 $handle") or die;
+taper_cmd("START-SCAN worker0 $handle");
+taper_cmd("NEW-TAPE worker0 $handle");
like(taper_reply, qr/^NEW-TAPE $handle TESTCONF02$/,
- "got proper NEW-TAPE") or die;
-like(taper_reply, qr/^PARTDONE $handle TESTCONF02 1 768 "\[sec [\d.]+ kb 768 kps [\d.]+\]"$/,
+ "got proper NEW-TAPE worker0 $handle") or die;
+like(taper_reply, qr/^PARTDONE $handle TESTCONF02 1 768 "\[sec [\d.]+ bytes 786432 kps [\d.]+\]"$/,
"got PARTDONE for filenum 1 on second tape") or die;
-like(taper_reply, qr/^PARTDONE $handle TESTCONF02 2 3 "\[sec [\d.]+ kb 3 kps [\d.]+\]"$/,
+like(taper_reply, qr/^PARTDONE $handle TESTCONF02 2 3 "\[sec [\d.]+ bytes 3072 kps [\d.]+\]"$/,
"got PARTDONE for filenum 2 on second tape") or die;
like(taper_reply, qr/^DUMPER-STATUS $handle$/,
"got DUMPER-STATUS request") or die;
-taper_cmd("DONE $handle 1012");
-like(taper_reply, qr/^DONE $handle INPUT-GOOD TAPE-GOOD "\[sec [\d.]+ kb 1539 kps [\d.]+ orig-kb 1012\]" "" ""$/,
+taper_cmd("DONE worker0 $handle 1012");
+like(taper_reply, qr/^DONE $handle INPUT-GOOD TAPE-GOOD "\[sec [\d.]+ bytes 1575936 kps [\d.]+ orig-kb 1012\]" "" ""$/,
"got DONE") or die;
taper_cmd("QUIT");
wait_for_exit();
check_logs([
- qr(^INFO taper Will write new label `TESTCONF01' to new tape$),
+ qr(^INFO taper Slot 1 without label can be labeled$),
qr(^START taper datestamp $datestamp label TESTCONF01 tape 1$),
- qr(^PART taper TESTCONF01 1 localhost /usr/local $datestamp 1/-1 0 \[sec [\d.]+ kb 768 kps [\d.]+\]$),
- qr(^PARTPARTIAL taper TESTCONF01 2 localhost /usr/local $datestamp 2/-1 0 \[sec [\d.]+ kb 160 kps [\d.]+\] "No space left on device"$),
+ qr(^PART taper TESTCONF01 1 localhost /usr/local $datestamp 1/-1 0 \[sec [\d.]+ bytes 786432 kps [\d.]+\]$),
+ qr(^PARTPARTIAL taper TESTCONF01 2 localhost /usr/local $datestamp 2/-1 0 \[sec [\d.]+ bytes 163840 kps [\d.]+\] "No space left on device"$),
qr(^INFO taper Will request retry of failed split part\.$),
qr(^INFO taper tape TESTCONF01 kb 768 fm 2 \[OK\]$),
- qr(^INFO taper Will write new label `TESTCONF02' to new tape$),
+ qr(^INFO taper Slot 2 without label can be labeled$),
qr(^START taper datestamp $datestamp label TESTCONF02 tape 2$),
- qr(^PART taper TESTCONF02 1 localhost /usr/local $datestamp 2/-1 0 \[sec [\d.]+ kb 768 kps [\d.]+\]$),
- qr(^PART taper TESTCONF02 2 localhost /usr/local $datestamp 3/-1 0 \[sec [\d.]+ kb 3 kps [\d.]+\]$),
- qr(^DONE taper localhost /usr/local $datestamp 3 0 \[sec [\d.]+ kb 1539 kps [\d.]+ orig-kb 1012\]$),
+ qr(^PART taper TESTCONF02 1 localhost /usr/local $datestamp 2/-1 0 \[sec [\d.]+ bytes 786432 kps [\d.]+\]$),
+ qr(^PART taper TESTCONF02 2 localhost /usr/local $datestamp 3/-1 0 \[sec [\d.]+ bytes 3072 kps [\d.]+\]$),
+ qr(^DONE taper localhost /usr/local $datestamp 3 0 \[sec [\d.]+ bytes 1575936 kps [\d.]+ orig-kb 1012\]$),
qr(^INFO taper tape TESTCONF02 kb 771 fm 2 \[OK\]$),
], "multivolume PORT-WRITE logged correctly");
$handle = "11-66666";
$datestamp = "19470815000000";
run_taper(1024, "FILE-WRITE retry on EOT");
-like(taper_reply, qr/^TAPER-OK$/,
+like(taper_reply, qr/^TAPER-OK worker0$/,
"got TAPER-OK") or die;
make_holding_file(1575936, "localhost", "/usr");
-taper_cmd("FILE-WRITE $handle \"$test_filename\" localhost /usr 0 $datestamp 786432 1112");
+taper_cmd("FILE-WRITE worker0 $handle \"$test_filename\" localhost /usr 0 $datestamp \"\" \"\" \"\" 1 786432 \"\" \"\" \"\" 1112");
like(taper_reply, qr/^REQUEST-NEW-TAPE $handle$/,
- "got REQUEST-NEW-TAPE") or die;
-taper_cmd("NEW-TAPE");
+ "got REQUEST-NEW-TAPE worker0 $handle") or die;
+taper_cmd("START-SCAN worker0 $handle");
+taper_cmd("NEW-TAPE worker0 $handle");
like(taper_reply, qr/^NEW-TAPE $handle TESTCONF01$/,
- "got proper NEW-TAPE") or die;
-like(taper_reply, qr/^PARTDONE $handle TESTCONF01 1 768 "\[sec [\d.]+ kb 768 kps [\d.]+ orig-kb 1112\]"$/,
+ "got proper NEW-TAPE worker0 $handle") or die;
+like(taper_reply, qr/^PARTDONE $handle TESTCONF01 1 768 "\[sec [\d.]+ bytes 786432 kps [\d.]+ orig-kb 1112\]"$/,
"got PARTDONE for filenum 1") or die;
like(taper_reply, qr/^REQUEST-NEW-TAPE $handle$/,
- "got REQUEST-NEW-TAPE") or die;
-taper_cmd("NEW-TAPE");
+ "got REQUEST-NEW-TAPE worker0 $handle") or die;
+taper_cmd("START-SCAN worker0 $handle");
+taper_cmd("NEW-TAPE worker0 $handle");
like(taper_reply, qr/^NEW-TAPE $handle TESTCONF02$/,
- "got proper NEW-TAPE") or die;
-like(taper_reply, qr/^PARTDONE $handle TESTCONF02 1 768 "\[sec [\d.]+ kb 768 kps [\d.]+ orig-kb 1112\]"$/,
+ "got proper NEW-TAPE worker0 $handle") or die;
+like(taper_reply, qr/^PARTDONE $handle TESTCONF02 1 768 "\[sec [\d.]+ bytes 786432 kps [\d.]+ orig-kb 1112\]"$/,
"got PARTDONE for filenum 1 on second tape") or die;
-like(taper_reply, qr/^PARTDONE $handle TESTCONF02 2 3 "\[sec [\d.]+ kb 3 kps [\d.]+ orig-kb 1112\]"$/,
+like(taper_reply, qr/^PARTDONE $handle TESTCONF02 2 3 "\[sec [\d.]+ bytes 3072 kps [\d.]+ orig-kb 1112\]"$/,
"got PARTDONE for filenum 2 on second tape") or die;
-like(taper_reply, qr/^DONE $handle INPUT-GOOD TAPE-GOOD "\[sec [\d.]+ kb 1539 kps [\d.]+ orig-kb 1112\]" "" ""$/,
+like(taper_reply, qr/^DONE $handle INPUT-GOOD TAPE-GOOD "\[sec [\d.]+ bytes 1575936 kps [\d.]+ orig-kb 1112\]" "" ""$/,
"got DONE") or die;
taper_cmd("QUIT");
wait_for_exit();
check_logs([
- qr(^INFO taper Will write new label `TESTCONF01' to new tape$),
+ qr(^INFO taper Slot 1 without label can be labeled$),
qr(^START taper datestamp $datestamp label TESTCONF01 tape 1$),
- qr(^PART taper TESTCONF01 1 localhost /usr $datestamp 1/-1 0 \[sec [\d.]+ kb 768 kps [\d.]+ orig-kb 1112\]$),
- qr(^PARTPARTIAL taper TESTCONF01 2 localhost /usr $datestamp 2/-1 0 \[sec [\d.]+ kb 160 kps [\d.]+ orig-kb 1112\] "No space left on device"$),
+ qr(^PART taper TESTCONF01 1 localhost /usr $datestamp 1/-1 0 \[sec [\d.]+ bytes 786432 kps [\d.]+ orig-kb 1112\]$),
+ qr(^PARTPARTIAL taper TESTCONF01 2 localhost /usr $datestamp 2/-1 0 \[sec [\d.]+ bytes 163840 kps [\d.]+ orig-kb 1112\] "No space left on device"$),
qr(^INFO taper Will request retry of failed split part\.$),
qr(^INFO taper tape TESTCONF01 kb 768 fm 2 \[OK\]$),
- qr(^INFO taper Will write new label `TESTCONF02' to new tape$),
+ qr(^INFO taper Slot 2 without label can be labeled$),
qr(^START taper datestamp $datestamp label TESTCONF02 tape 2$),
- qr(^PART taper TESTCONF02 1 localhost /usr $datestamp 2/-1 0 \[sec [\d.]+ kb 768 kps [\d.]+ orig-kb 1112\]$),
- qr(^PART taper TESTCONF02 2 localhost /usr $datestamp 3/-1 0 \[sec [\d.]+ kb 3 kps [\d.]+ orig-kb 1112\]$),
- qr(^DONE taper localhost /usr $datestamp 3 0 \[sec [\d.]+ kb 1539 kps [\d.]+ orig-kb 1112\]$),
+ qr(^PART taper TESTCONF02 1 localhost /usr $datestamp 2/-1 0 \[sec [\d.]+ bytes 786432 kps [\d.]+ orig-kb 1112\]$),
+ qr(^PART taper TESTCONF02 2 localhost /usr $datestamp 3/-1 0 \[sec [\d.]+ bytes 3072 kps [\d.]+ orig-kb 1112\]$),
+ qr(^DONE taper localhost /usr $datestamp 3 0 \[sec [\d.]+ bytes 1575936 kps [\d.]+ orig-kb 1112\]$),
qr(^INFO taper tape TESTCONF02 kb 771 fm 2 \[OK\]$),
], "multivolume FILE-WRITE logged correctly");
$handle = "11-77777";
$datestamp = "20090427212500";
run_taper(1024, "PORT-WRITE retry on EOT (disk cache)");
-like(taper_reply, qr/^TAPER-OK$/,
+like(taper_reply, qr/^TAPER-OK worker0$/,
"got TAPER-OK") or die;
-taper_cmd("PORT-WRITE $handle localhost /usr/local 0 $datestamp 786432 \"$Installcheck::TMP\" 786432");
-like(taper_reply, qr/^PORT (\d+) "?(\d+\.\d+\.\d+\.\d+:\d+;?)+"?$/,
+taper_cmd("PORT-WRITE worker0 $handle localhost /usr/local 0 $datestamp 786432 \"$Installcheck::TMP\" 786432 1 0 \"\" \"\" 0 AMANDA");
+like(taper_reply, qr/^PORT worker0 $handle (\d+) "?(\d+\.\d+\.\d+\.\d+:\d+;?)+"?$/,
"got PORT with data address");
write_to_port($last_taper_reply, 1575936, "localhost", "/usr/local", 0);
like(taper_reply, qr/^REQUEST-NEW-TAPE $handle$/,
- "got REQUEST-NEW-TAPE") or die;
-taper_cmd("NEW-TAPE");
+ "got REQUEST-NEW-TAPE worker0 $handle") or die;
+taper_cmd("START-SCAN worker0 $handle");
+taper_cmd("NEW-TAPE worker0 $handle");
like(taper_reply, qr/^NEW-TAPE $handle TESTCONF01$/,
- "got proper NEW-TAPE") or die;
-like(taper_reply, qr/^PARTDONE $handle TESTCONF01 1 768 "\[sec [\d.]+ kb 768 kps [\d.]+\]"$/,
+ "got proper NEW-TAPE worker0 $handle") or die;
+like(taper_reply, qr/^PARTDONE $handle TESTCONF01 1 768 "\[sec [\d.]+ bytes 786432 kps [\d.]+\]"$/,
"got PARTDONE for filenum 1") or die;
like(taper_reply, qr/^REQUEST-NEW-TAPE $handle$/,
- "got REQUEST-NEW-TAPE") or die;
-taper_cmd("NEW-TAPE");
+ "got REQUEST-NEW-TAPE worker0 $handle") or die;
+taper_cmd("START-SCAN worker0 $handle");
+taper_cmd("NEW-TAPE worker0 $handle");
like(taper_reply, qr/^NEW-TAPE $handle TESTCONF02$/,
- "got proper NEW-TAPE") or die;
-like(taper_reply, qr/^PARTDONE $handle TESTCONF02 1 768 "\[sec [\d.]+ kb 768 kps [\d.]+\]"$/,
+ "got proper NEW-TAPE worker0 $handle") or die;
+like(taper_reply, qr/^PARTDONE $handle TESTCONF02 1 768 "\[sec [\d.]+ bytes 786432 kps [\d.]+\]"$/,
"got PARTDONE for filenum 1 on second tape") or die;
-like(taper_reply, qr/^PARTDONE $handle TESTCONF02 2 3 "\[sec [\d.]+ kb 3 kps [\d.]+\]"$/,
+like(taper_reply, qr/^PARTDONE $handle TESTCONF02 2 3 "\[sec [\d.]+ bytes 3072 kps [\d.]+\]"$/,
"got PARTDONE for filenum 2 on second tape") or die;
like(taper_reply, qr/^DUMPER-STATUS $handle$/,
"got DUMPER-STATUS request") or die;
-taper_cmd("DONE $handle 1212");
-like(taper_reply, qr/^DONE $handle INPUT-GOOD TAPE-GOOD "\[sec [\d.]+ kb 1539 kps [\d.]+ orig-kb 1212\]" "" ""$/,
+taper_cmd("DONE worker0 $handle 1212");
+like(taper_reply, qr/^DONE $handle INPUT-GOOD TAPE-GOOD "\[sec [\d.]+ bytes 1575936 kps [\d.]+ orig-kb 1212\]" "" ""$/,
"got DONE") or die;
taper_cmd("QUIT");
wait_for_exit();
check_logs([
- qr(^INFO taper Will write new label `TESTCONF01' to new tape$),
+ qr(^INFO taper Slot 1 without label can be labeled$),
qr(^START taper datestamp $datestamp label TESTCONF01 tape 1$),
- qr(^PART taper TESTCONF01 1 localhost /usr/local $datestamp 1/-1 0 \[sec [\d.]+ kb 768 kps [\d.]+\]$),
- qr(^PARTPARTIAL taper TESTCONF01 2 localhost /usr/local $datestamp 2/-1 0 \[sec [\d.]+ kb 160 kps [\d.]+\] "No space left on device"$),
+ qr(^PART taper TESTCONF01 1 localhost /usr/local $datestamp 1/-1 0 \[sec [\d.]+ bytes 786432 kps [\d.]+\]$),
+ qr(^PARTPARTIAL taper TESTCONF01 2 localhost /usr/local $datestamp 2/-1 0 \[sec [\d.]+ bytes 163840 kps [\d.]+\] "No space left on device"$),
qr(^INFO taper Will request retry of failed split part\.$),
qr(^INFO taper tape TESTCONF01 kb 768 fm 2 \[OK\]$),
- qr(^INFO taper Will write new label `TESTCONF02' to new tape$),
+ qr(^INFO taper Slot 2 without label can be labeled$),
qr(^START taper datestamp $datestamp label TESTCONF02 tape 2$),
- qr(^PART taper TESTCONF02 1 localhost /usr/local $datestamp 2/-1 0 \[sec [\d.]+ kb 768 kps [\d.]+\]$),
- qr(^PART taper TESTCONF02 2 localhost /usr/local $datestamp 3/-1 0 \[sec [\d.]+ kb 3 kps [\d.]+\]$),
- qr(^DONE taper localhost /usr/local $datestamp 3 0 \[sec [\d.]+ kb 1539 kps [\d.]+ orig-kb 1212\]$),
+ qr(^PART taper TESTCONF02 1 localhost /usr/local $datestamp 2/-1 0 \[sec [\d.]+ bytes 786432 kps [\d.]+\]$),
+ qr(^PART taper TESTCONF02 2 localhost /usr/local $datestamp 3/-1 0 \[sec [\d.]+ bytes 3072 kps [\d.]+\]$),
+ qr(^DONE taper localhost /usr/local $datestamp 3 0 \[sec [\d.]+ bytes 1575936 kps [\d.]+ orig-kb 1212\]$),
qr(^INFO taper tape TESTCONF02 kb 771 fm 2 \[OK\]$),
], "multivolume PORT-WRITE (disk cache) logged correctly");
$handle = "11-88888";
$datestamp = "20090424173000";
run_taper(1024, "PORT-WRITE failure on EOT (no cache)");
-like(taper_reply, qr/^TAPER-OK$/,
+like(taper_reply, qr/^TAPER-OK worker0$/,
"got TAPER-OK") or die;
-taper_cmd("PORT-WRITE $handle localhost /var/log 0 $datestamp 0 NULL 0");
-like(taper_reply, qr/^PORT (\d+) "?(\d+\.\d+\.\d+\.\d+:\d+;?)+"?$/,
+taper_cmd("PORT-WRITE worker0 $handle localhost /var/log 0 $datestamp 0 \"\" 0 0 0 \"\" \"\" 0 AMANDA");
+like(taper_reply, qr/^PORT worker0 $handle (\d+) "?(\d+\.\d+\.\d+\.\d+:\d+;?)+"?$/,
"got PORT with data address");
write_to_port($last_taper_reply, 1575936, "localhost", "/var/log", 1);
like(taper_reply, qr/^REQUEST-NEW-TAPE $handle$/,
- "got REQUEST-NEW-TAPE") or die;
-taper_cmd("NEW-TAPE");
+ "got REQUEST-NEW-TAPE worker0 $handle") or die;
+taper_cmd("START-SCAN worker0 $handle");
+taper_cmd("NEW-TAPE worker0 $handle");
like(taper_reply, qr/^NEW-TAPE $handle TESTCONF01$/,
- "got proper NEW-TAPE") or die;
-like(taper_reply, qr/^PARTIAL $handle INPUT-GOOD TAPE-ERROR "\[sec [\d.]+ kb 0 kps [\d.]+\]" "" "No space left on device"$/,
+ "got proper NEW-TAPE worker0 $handle") or die;
+like(taper_reply, qr/^PARTIAL $handle INPUT-GOOD TAPE-ERROR "\[sec [\d.]+ bytes 0 kps [\d.]+\]" "" "No space left on device, splitting not enabled"$/,
"got PARTIAL") or die;
# retry on the next tape
$handle = "11-88899";
-taper_cmd("PORT-WRITE $handle localhost /boot 0 $datestamp 0 NULL 0");
-like(taper_reply, qr/^PORT (\d+) "?(\d+\.\d+\.\d+\.\d+:\d+;?)+"?$/,
+taper_cmd("PORT-WRITE worker0 $handle localhost /boot 0 $datestamp 0 \"\" 0 0 0 \"\" \"\" 0 AMANDA");
+like(taper_reply, qr/^PORT worker0 $handle (\d+) "?(\d+\.\d+\.\d+\.\d+:\d+;?)+"?$/,
"got PORT with data address");
write_to_port($last_taper_reply, 65536, "localhost", "/boot", 0);
like(taper_reply, qr/^REQUEST-NEW-TAPE $handle$/,
- "got REQUEST-NEW-TAPE") or die;
-taper_cmd("NEW-TAPE");
+ "got REQUEST-NEW-TAPE worker0 $handle") or die;
+taper_cmd("START-SCAN worker0 $handle");
+taper_cmd("NEW-TAPE worker0 $handle");
like(taper_reply, qr/^NEW-TAPE $handle TESTCONF02$/,
- "got proper NEW-TAPE") or die;
-like(taper_reply, qr/^PARTDONE $handle TESTCONF02 1 64 "\[sec [\d.]+ kb 64 kps [\d.]+\]"$/,
+ "got proper NEW-TAPE worker0 $handle") or die;
+like(taper_reply, qr/^PARTDONE $handle TESTCONF02 1 64 "\[sec [\d.]+ bytes 65536 kps [\d.]+\]"$/,
"got PARTDONE for filenum 1 on second tape") or die;
like(taper_reply, qr/^DUMPER-STATUS $handle$/,
"got DUMPER-STATUS request") or die;
-taper_cmd("DONE $handle 64");
-like(taper_reply, qr/^DONE $handle INPUT-GOOD TAPE-GOOD "\[sec [\d.]+ kb 64 kps [\d.]+ orig-kb 64\]" "" ""$/,
+taper_cmd("DONE worker0 $handle 64");
+like(taper_reply, qr/^DONE $handle INPUT-GOOD TAPE-GOOD "\[sec [\d.]+ bytes 65536 kps [\d.]+ orig-kb 64\]" "" ""$/,
"got DONE") or die;
taper_cmd("QUIT");
wait_for_exit();
check_logs([
- qr(^INFO taper Will write new label `TESTCONF01' to new tape$),
+ qr(^INFO taper Slot 1 without label can be labeled$),
qr(^START taper datestamp $datestamp label TESTCONF01 tape 1$),
- qr(^PARTPARTIAL taper TESTCONF01 1 localhost /var/log $datestamp 1/-1 0 \[sec [\d.]+ kb 960 kps [\d.]+\] "No space left on device"$),
- qr(^PARTIAL taper localhost /var/log $datestamp 1 0 \[sec [\d.]+ kb 0 kps [\d.]+\] "No space left on device"$),
+ qr(^PARTPARTIAL taper TESTCONF01 1 localhost /var/log $datestamp 1/-1 0 \[sec [\d.]+ bytes 983040 kps [\d.]+\] "No space left on device"$),
+ qr(^PARTIAL taper localhost /var/log $datestamp 1 0 \[sec [\d.]+ bytes 0 kps [\d.]+\] "No space left on device, splitting not enabled"$),
qr(^INFO taper tape TESTCONF01 kb 0 fm 1 \[OK\]$),
- qr(^INFO taper Will write new label `TESTCONF02' to new tape$),
+ qr(^INFO taper Slot 2 without label can be labeled$),
qr(^START taper datestamp $datestamp label TESTCONF02 tape 2$),
- qr(^PART taper TESTCONF02 1 localhost /boot $datestamp 1/-1 0 \[sec [\d.]+ kb 64 kps [\d.]+\]$),
- qr(^DONE taper localhost /boot $datestamp 1 0 \[sec [\d.]+ kb 64 kps [\d.]+ orig-kb 64\]$),
+ qr(^PART taper TESTCONF02 1 localhost /boot $datestamp 1/-1 0 \[sec [\d.]+ bytes 65536 kps [\d.]+\]$),
+ qr(^DONE taper localhost /boot $datestamp 1 0 \[sec [\d.]+ bytes 65536 kps [\d.]+ orig-kb 64\]$),
qr(^INFO taper tape TESTCONF02 kb 64 fm 1 \[OK\]$),
], "failure on EOT (no cache) with subsequent dump logged correctly");
$handle = "11-99999";
$datestamp = "20100101000000";
run_taper(512, "FILE-WRITE runs out of tapes");
-like(taper_reply, qr/^TAPER-OK$/,
+like(taper_reply, qr/^TAPER-OK worker0$/,
"got TAPER-OK") or die;
make_holding_file(512*1024, "localhost", "/music");
-taper_cmd("FILE-WRITE $handle \"$test_filename\" localhost /music 0 $datestamp 262144 1312");
+taper_cmd("FILE-WRITE worker0 $handle \"$test_filename\" localhost /music 0 $datestamp \"\" \"\" \"\" 1 262144 \"none\" \"\" 10240 1312");
like(taper_reply, qr/^REQUEST-NEW-TAPE $handle$/,
- "got REQUEST-NEW-TAPE") or die;
-taper_cmd("NEW-TAPE");
+ "got REQUEST-NEW-TAPE worker0 $handle") or die;
+taper_cmd("START-SCAN worker0 $handle");
+taper_cmd("NEW-TAPE worker0 $handle");
like(taper_reply, qr/^NEW-TAPE $handle TESTCONF01$/,
- "got proper NEW-TAPE") or die;
-like(taper_reply, qr/^PARTDONE $handle TESTCONF01 1 256 "\[sec [\d.]+ kb 256 kps [\d.]+ orig-kb 1312\]"$/,
+ "got proper NEW-TAPE worker0 $handle") or die;
+like(taper_reply, qr/^PARTDONE $handle TESTCONF01 1 256 "\[sec [\d.]+ bytes 262144 kps [\d.]+ orig-kb 1312\]"$/,
"got PARTDONE for filenum 1 on first tape") or die;
like(taper_reply, qr/^REQUEST-NEW-TAPE $handle$/,
- "got REQUEST-NEW-TAPE") or die;
-taper_cmd("NO-NEW-TAPE \"that's enough\"");
-like(taper_reply, qr/^PARTIAL $handle INPUT-GOOD TAPE-ERROR "\[sec [\d.]+ kb 256 kps [\d.]+ orig-kb 1312\]" "" "CONFIG:that's enough"$/,
+ "got REQUEST-NEW-TAPE worker0 $handle") or die;
+taper_cmd("NO-NEW-TAPE worker0 $handle \"that's enough\"");
+like(taper_reply, qr/^PARTIAL $handle INPUT-GOOD TAPE-ERROR "\[sec [\d.]+ bytes 262144 kps [\d.]+ orig-kb 1312\]" "" "that's enough"$/,
"got PARTIAL") or die;
taper_cmd("QUIT");
wait_for_exit();
check_logs([
- qr(^INFO taper Will write new label `TESTCONF01' to new tape$),
+ qr(^INFO taper Slot 1 without label can be labeled$),
qr(^START taper datestamp $datestamp label TESTCONF01 tape 1$),
- qr(^PART taper TESTCONF01 1 localhost /music $datestamp 1/-1 0 \[sec [\d.]+ kb 256 kps [\d.]+ orig-kb 1312\]$),
- qr(^PARTPARTIAL taper TESTCONF01 2 localhost /music $datestamp 2/-1 0 \[sec [\d.]+ kb 160 kps [\d.]+ orig-kb 1312\] "No space left on device"$),
+ qr(^PART taper TESTCONF01 1 localhost /music $datestamp 1/-1 0 \[sec [\d.]+ bytes 262144 kps [\d.]+ orig-kb 1312\]$),
+ qr(^PARTPARTIAL taper TESTCONF01 2 localhost /music $datestamp 2/-1 0 \[sec [\d.]+ bytes 163840 kps [\d.]+ orig-kb 1312\] "No space left on device"$),
qr(^INFO taper Will request retry of failed split part\.$),
qr(^INFO taper tape TESTCONF01 kb 256 fm 2 \[OK\]$),
- qr(^ERROR taper no-tape \[CONFIG:that's enough\]$),
- qr(^INFO taper Will write new label `TESTCONF02' to new tape$),
- qr(^PARTIAL taper localhost /music $datestamp 2 0 \[sec [\d.]+ kb 256 kps [\d.]+ orig-kb 1312\] "CONFIG:that's enough"$),
+ qr(^ERROR taper no-tape config \[that's enough\]$),
+ qr(^PARTIAL taper localhost /music $datestamp 2 0 \[sec [\d.]+ bytes 262144 kps [\d.]+ orig-kb 1312\] "that's enough"$),
], "running out of tapes (simulating runtapes=1) logged correctly");
##
$handle = "22-00000";
$datestamp = "20200202222222";
run_taper(4096, "multipart PORT-WRITE");
-like(taper_reply, qr/^TAPER-OK$/,
+like(taper_reply, qr/^TAPER-OK worker0$/,
"got TAPER-OK") or die;
-taper_cmd("PORT-WRITE $handle localhost /sbin 0 $datestamp 10 NULL 655360");
-like(taper_reply, qr/^PORT (\d+) "?(\d+\.\d+\.\d+\.\d+:\d+;?)+"?$/,
+taper_cmd("PORT-WRITE worker0 $handle localhost /sbin 0 $datestamp 999999 \"\" 655360 1 \"\" \"\" \"\" \"\" AMANDA");
+like(taper_reply, qr/^PORT worker0 $handle (\d+) "?(\d+\.\d+\.\d+\.\d+:\d+;?)+"?$/,
"got PORT with data address");
write_to_port($last_taper_reply, 63*32768, "localhost", "/sbin", 0);
like(taper_reply, qr/^REQUEST-NEW-TAPE $handle$/,
- "got REQUEST-NEW-TAPE") or die;
-taper_cmd("NEW-TAPE");
+ "got REQUEST-NEW-TAPE worker0 $handle") or die;
+taper_cmd("START-SCAN worker0 $handle");
+taper_cmd("NEW-TAPE worker0 $handle");
like(taper_reply, qr/^NEW-TAPE $handle TESTCONF01$/,
- "got proper NEW-TAPE") or die;
-like(taper_reply, qr/^PARTDONE $handle TESTCONF01 1 640 "\[sec [\d.]+ kb 640 kps [\d.]+\]"$/,
+ "got proper NEW-TAPE worker0 $handle") or die;
+like(taper_reply, qr/^PARTDONE $handle TESTCONF01 1 640 "\[sec [\d.]+ bytes 655360 kps [\d.]+\]"$/,
"got PARTDONE for filenum 1") or die;
-like(taper_reply, qr/^PARTDONE $handle TESTCONF01 2 640 "\[sec [\d.]+ kb 640 kps [\d.]+\]"$/,
+like(taper_reply, qr/^PARTDONE $handle TESTCONF01 2 640 "\[sec [\d.]+ bytes 655360 kps [\d.]+\]"$/,
"got PARTDONE for filenum 2") or die;
-like(taper_reply, qr/^PARTDONE $handle TESTCONF01 3 640 "\[sec [\d.]+ kb 640 kps [\d.]+\]"$/,
+like(taper_reply, qr/^PARTDONE $handle TESTCONF01 3 640 "\[sec [\d.]+ bytes 655360 kps [\d.]+\]"$/,
"got PARTDONE for filenum 3") or die;
-like(taper_reply, qr/^PARTDONE $handle TESTCONF01 4 96 "\[sec [\d.]+ kb 96 kps [\d.]+\]"$/,
+like(taper_reply, qr/^PARTDONE $handle TESTCONF01 4 96 "\[sec [\d.]+ bytes 98304 kps [\d.]+\]"$/,
"got PARTDONE for filenum 4") or die;
like(taper_reply, qr/^DUMPER-STATUS $handle$/,
"got DUMPER-STATUS request") or die;
-taper_cmd("FAILED $handle");
-like(taper_reply, qr/^DONE $handle INPUT-GOOD TAPE-GOOD "\[sec [\d.]+ kb 2016 kps [\d.]+\]" "" ""$/,
+taper_cmd("FAILED worker0 $handle");
+like(taper_reply, qr/^DONE $handle INPUT-GOOD TAPE-GOOD "\[sec [\d.]+ bytes 2064384 kps [\d.]+\]" "" ""$/,
"got DONE") or die;
taper_cmd("QUIT");
wait_for_exit();
check_logs([
- qr(^INFO taper Will write new label `TESTCONF01' to new tape$),
+ qr(^INFO taper Slot 1 without label can be labeled$),
qr(^START taper datestamp $datestamp label TESTCONF01 tape 1$),
- qr(^PART taper TESTCONF01 1 localhost /sbin $datestamp 1/-1 0 \[sec [\d.]+ kb 640 kps [\d.]+\]$),
- qr(^PART taper TESTCONF01 2 localhost /sbin $datestamp 2/-1 0 \[sec [\d.]+ kb 640 kps [\d.]+\]$),
- qr(^PART taper TESTCONF01 3 localhost /sbin $datestamp 3/-1 0 \[sec [\d.]+ kb 640 kps [\d.]+\]$),
- qr(^PART taper TESTCONF01 4 localhost /sbin $datestamp 4/-1 0 \[sec [\d.]+ kb 96 kps [\d.]+\]$),
- qr(^PARTIAL taper localhost /sbin $datestamp 4 0 \[sec [\d.]+ kb 2016 kps [\d.]+\]$), # note no error message
+ qr(^PART taper TESTCONF01 1 localhost /sbin $datestamp 1/-1 0 \[sec [\d.]+ bytes 655360 kps [\d.]+\]$),
+ qr(^PART taper TESTCONF01 2 localhost /sbin $datestamp 2/-1 0 \[sec [\d.]+ bytes 655360 kps [\d.]+\]$),
+ qr(^PART taper TESTCONF01 3 localhost /sbin $datestamp 3/-1 0 \[sec [\d.]+ bytes 655360 kps [\d.]+\]$),
+ qr(^PART taper TESTCONF01 4 localhost /sbin $datestamp 4/-1 0 \[sec [\d.]+ bytes 98304 kps [\d.]+\]$),
+ qr(^PARTIAL taper localhost /sbin $datestamp 4 0 \[sec [\d.]+ bytes 2064384 kps [\d.]+\]$), # note no error message
qr(^INFO taper tape TESTCONF01 kb 2016 fm 4 \[OK\]$),
], "DUMPER_STATUS => FAILED logged correctly");
$handle = "33-11111";
$datestamp = "20090101010000";
run_taper(1024, "first in a sequence");
-like(taper_reply, qr/^TAPER-OK$/,
+like(taper_reply, qr/^TAPER-OK worker0$/,
"got TAPER-OK") or die;
make_holding_file(500000, "localhost", "/u01");
-taper_cmd("FILE-WRITE $handle \"$test_filename\" localhost /u01 0 $datestamp 262144 1412");
+taper_cmd("FILE-WRITE worker0 $handle \"$test_filename\" localhost /u01 0 $datestamp 262144 \"\" \"\" \"\" \"\" \"\" \"\" \"\" 1412");
like(taper_reply, qr/^REQUEST-NEW-TAPE $handle$/,
- "got REQUEST-NEW-TAPE") or die;
-taper_cmd("NEW-TAPE");
+ "got REQUEST-NEW-TAPE worker0 $handle") or die;
+taper_cmd("START-SCAN worker0 $handle");
+taper_cmd("NEW-TAPE worker0 $handle");
like(taper_reply, qr/^NEW-TAPE $handle TESTCONF01$/,
- "got proper NEW-TAPE") or die;
-like(taper_reply, qr/^PARTDONE $handle TESTCONF01 1 256 "\[sec [\d.]+ kb 256 kps [\d.]+ orig-kb 1412\]"$/,
+ "got proper NEW-TAPE worker0 $handle") or die;
+like(taper_reply, qr/^PARTDONE $handle TESTCONF01 1 256 "\[sec [\d.]+ bytes 262144 kps [\d.]+ orig-kb 1412\]"$/,
"got PARTDONE for filenum 1") or die;
-like(taper_reply, qr/^PARTDONE $handle TESTCONF01 2 232 "\[sec [\d.]+ kb 232 kps [\d.]+ orig-kb 1412\]"$/,
+like(taper_reply, qr/^PARTDONE $handle TESTCONF01 2 232 "\[sec [\d.]+ bytes 237856 kps [\d.]+ orig-kb 1412\]"$/,
"got PARTDONE for filenum 2") or die;
-like(taper_reply, qr/^DONE $handle INPUT-GOOD TAPE-GOOD "\[sec [\d.]+ kb 488 kps [\d.]+ orig-kb 1412\]" "" ""$/,
+like(taper_reply, qr/^DONE $handle INPUT-GOOD TAPE-GOOD "\[sec [\d.]+ bytes 500000 kps [\d.]+ orig-kb 1412\]" "" ""$/,
"got DONE") or die;
$handle = "33-22222";
make_holding_file(614400, "localhost", "/u02");
-taper_cmd("FILE-WRITE $handle \"$test_filename\" localhost /u02 0 $datestamp 262144 1512");
-like(taper_reply, qr/^PARTDONE $handle TESTCONF01 3 256 "\[sec [\d.]+ kb 256 kps [\d.]+ orig-kb 1512\]"$/,
+taper_cmd("FILE-WRITE worker0 $handle \"$test_filename\" localhost /u02 0 $datestamp 262144 \"\" \"\" \"\" \"\" \"\" \"\" \"\" 1512");
+like(taper_reply, qr/^PARTDONE $handle TESTCONF01 3 256 "\[sec [\d.]+ bytes 262144 kps [\d.]+ orig-kb 1512\]"$/,
"got PARTDONE for filenum 3") or die;
like(taper_reply, qr/^REQUEST-NEW-TAPE $handle$/,
- "got REQUEST-NEW-TAPE") or die;
-taper_cmd("NEW-TAPE");
+ "got REQUEST-NEW-TAPE worker0 $handle") or die;
+taper_cmd("START-SCAN worker0 $handle");
+taper_cmd("NEW-TAPE worker0 $handle");
like(taper_reply, qr/^NEW-TAPE $handle TESTCONF02$/,
- "got proper NEW-TAPE") or die;
-like(taper_reply, qr/^PARTDONE $handle TESTCONF02 1 256 "\[sec [\d.]+ kb 256 kps [\d.]+ orig-kb 1512\]"$/,
+ "got proper NEW-TAPE worker0 $handle") or die;
+like(taper_reply, qr/^PARTDONE $handle TESTCONF02 1 256 "\[sec [\d.]+ bytes 262144 kps [\d.]+ orig-kb 1512\]"$/,
"got PARTDONE for filenum 1 on second tape") or die;
-like(taper_reply, qr/^PARTDONE $handle TESTCONF02 2 88 "\[sec [\d.]+ kb 88 kps [\d.]+ orig-kb 1512\]"$/,
+like(taper_reply, qr/^PARTDONE $handle TESTCONF02 2 88 "\[sec [\d.]+ bytes 90112 kps [\d.]+ orig-kb 1512\]"$/,
"got PARTDONE for filenum 2 on second tape") or die;
-like(taper_reply, qr/^DONE $handle INPUT-GOOD TAPE-GOOD "\[sec [\d.]+ kb 600 kps [\d.]+ orig-kb 1512\]" "" ""$/,
+like(taper_reply, qr/^DONE $handle INPUT-GOOD TAPE-GOOD "\[sec [\d.]+ bytes 614400 kps [\d.]+ orig-kb 1512\]" "" ""$/,
"got DONE") or die;
taper_cmd("QUIT");
wait_for_exit();
check_logs([
- qr(^INFO taper Will write new label `TESTCONF01' to new tape$),
+ qr(^INFO taper Slot 1 without label can be labeled$),
qr(^START taper datestamp $datestamp label TESTCONF01 tape 1$),
- qr(^PART taper TESTCONF01 1 localhost /u01 $datestamp 1/-1 0 \[sec [\d.]+ kb 256 kps [\d.]+ orig-kb 1412\]$),
- qr(^PART taper TESTCONF01 2 localhost /u01 $datestamp 2/-1 0 \[sec [\d.]+ kb 232 kps [\d.]+ orig-kb 1412\]$),
- qr(^DONE taper localhost /u01 $datestamp 2 0 \[sec [\d.]+ kb 488 kps [\d.]+ orig-kb 1412\]$),
- qr(^PART taper TESTCONF01 3 localhost /u02 $datestamp 1/-1 0 \[sec [\d.]+ kb 256 kps [\d.]+ orig-kb 1512\]$),
- qr(^PARTPARTIAL taper TESTCONF01 4 localhost /u02 $datestamp 2/-1 0 \[sec [\d.]+ kb 96 kps [\d.]+ orig-kb 1512\] "No space left on device"$),
+ qr(^PART taper TESTCONF01 1 localhost /u01 $datestamp 1/-1 0 \[sec [\d.]+ bytes 262144 kps [\d.]+ orig-kb 1412\]$),
+ qr(^PART taper TESTCONF01 2 localhost /u01 $datestamp 2/-1 0 \[sec [\d.]+ bytes 237856 kps [\d.]+ orig-kb 1412\]$),
+ qr(^DONE taper localhost /u01 $datestamp 2 0 \[sec [\d.]+ bytes 500000 kps [\d.]+ orig-kb 1412\]$),
+ qr(^PART taper TESTCONF01 3 localhost /u02 $datestamp 1/-1 0 \[sec [\d.]+ bytes 262144 kps [\d.]+ orig-kb 1512\]$),
+ qr(^PARTPARTIAL taper TESTCONF01 4 localhost /u02 $datestamp 2/-1 0 \[sec [\d.]+ bytes 98304 kps [\d.]+ orig-kb 1512\] "No space left on device"$),
qr(^INFO taper Will request retry of failed split part\.$),
qr(^INFO taper tape TESTCONF01 kb 744 fm 4 \[OK\]$),
- qr(^INFO taper Will write new label `TESTCONF02' to new tape$),
+ qr(^INFO taper Slot 2 without label can be labeled$),
qr(^START taper datestamp $datestamp label TESTCONF02 tape 2$),
- qr(^PART taper TESTCONF02 1 localhost /u02 $datestamp 2/-1 0 \[sec [\d.]+ kb 256 kps [\d.]+ orig-kb 1512\]$),
- qr(^PART taper TESTCONF02 2 localhost /u02 $datestamp 3/-1 0 \[sec [\d.]+ kb 88 kps [\d.]+ orig-kb 1512\]$),
- qr(^DONE taper localhost /u02 $datestamp 3 0 \[sec [\d.]+ kb 600 kps [\d.]+ orig-kb 1512\]$),
+ qr(^PART taper TESTCONF02 1 localhost /u02 $datestamp 2/-1 0 \[sec [\d.]+ bytes 262144 kps [\d.]+ orig-kb 1512\]$),
+ qr(^PART taper TESTCONF02 2 localhost /u02 $datestamp 3/-1 0 \[sec [\d.]+ bytes 90112 kps [\d.]+ orig-kb 1512\]$),
+ qr(^DONE taper localhost /u02 $datestamp 3 0 \[sec [\d.]+ bytes 614400 kps [\d.]+ orig-kb 1512\]$),
qr(^INFO taper tape TESTCONF02 kb 344 fm 2 \[OK\]$),
], "first taper invocation in sequence logged correctly");
cleanup_log();
$handle = "33-33333";
$datestamp = "20090202020000";
run_taper(1024, "second in a sequence", keep_config => 1);
-like(taper_reply, qr/^TAPER-OK$/,
+like(taper_reply, qr/^TAPER-OK worker0$/,
"got TAPER-OK") or die;
make_holding_file(300000, "localhost", "/u01");
-taper_cmd("FILE-WRITE $handle \"$test_filename\" localhost /u01 0 $datestamp 262144 1612");
+taper_cmd("FILE-WRITE worker0 $handle \"$test_filename\" localhost /u01 0 $datestamp 262144 \"\" \"\" \"\" \"\" \"\" \"\" \"\" 1612");
like(taper_reply, qr/^REQUEST-NEW-TAPE $handle$/,
- "got REQUEST-NEW-TAPE") or die;
-taper_cmd("NEW-TAPE");
+ "got REQUEST-NEW-TAPE worker0 $handle") or die;
+taper_cmd("START-SCAN worker0 $handle");
+taper_cmd("NEW-TAPE worker0 $handle");
like(taper_reply, qr/^NEW-TAPE $handle TESTCONF03$/,
- "got proper NEW-TAPE") or die;
-like(taper_reply, qr/^PARTDONE $handle TESTCONF03 1 256 "\[sec [\d.]+ kb 256 kps [\d.]+ orig-kb 1612\]"$/,
+ "got proper NEW-TAPE worker0 $handle") or die;
+like(taper_reply, qr/^PARTDONE $handle TESTCONF03 1 256 "\[sec [\d.]+ bytes 262144 kps [\d.]+ orig-kb 1612\]"$/,
"got PARTDONE for filenum 1") or die;
-like(taper_reply, qr/^PARTDONE $handle TESTCONF03 2 36 "\[sec [\d.]+ kb 36 kps [\d.]+ orig-kb 1612\]"$/,
+like(taper_reply, qr/^PARTDONE $handle TESTCONF03 2 36 "\[sec [\d.]+ bytes 37856 kps [\d.]+ orig-kb 1612\]"$/,
"got PARTDONE for filenum 2") or die;
-like(taper_reply, qr/^DONE $handle INPUT-GOOD TAPE-GOOD "\[sec [\d.]+ kb 292 kps [\d.]+ orig-kb 1612\]" "" ""$/,
+like(taper_reply, qr/^DONE $handle INPUT-GOOD TAPE-GOOD "\[sec [\d.]+ bytes 300000 kps [\d.]+ orig-kb 1612\]" "" ""$/,
"got DONE") or die;
$handle = "33-44444";
make_holding_file(614400, "localhost", "/u02");
-taper_cmd("FILE-WRITE $handle \"$test_filename\" localhost /u02 0 $datestamp 262144 1712");
-like(taper_reply, qr/^PARTDONE $handle TESTCONF03 3 256 "\[sec [\d.]+ kb 256 kps [\d.]+ orig-kb 1712\]"$/,
+taper_cmd("FILE-WRITE worker0 $handle \"$test_filename\" localhost /u02 0 $datestamp 262144 \"\" \"\" \"\" \"\" \"\" \"\" \"\" 1712");
+like(taper_reply, qr/^PARTDONE $handle TESTCONF03 3 256 "\[sec [\d.]+ bytes 262144 kps [\d.]+ orig-kb 1712\]"$/,
"got PARTDONE for filenum 3") or die;
-like(taper_reply, qr/^PARTDONE $handle TESTCONF03 4 256 "\[sec [\d.]+ kb 256 kps [\d.]+ orig-kb 1712\]"$/,
+like(taper_reply, qr/^PARTDONE $handle TESTCONF03 4 256 "\[sec [\d.]+ bytes 262144 kps [\d.]+ orig-kb 1712\]"$/,
"got PARTDONE for filenum 4") or die;
like(taper_reply, qr/^REQUEST-NEW-TAPE $handle$/,
- "got REQUEST-NEW-TAPE") or die;
-taper_cmd("NEW-TAPE");
+ "got REQUEST-NEW-TAPE worker0 $handle") or die;
+taper_cmd("START-SCAN worker0 $handle");
+taper_cmd("NEW-TAPE worker0 $handle");
like(taper_reply, qr/^NEW-TAPE $handle TESTCONF01$/,
- "got proper NEW-TAPE") or die;
-like(taper_reply, qr/^PARTDONE $handle TESTCONF01 1 88 "\[sec [\d.]+ kb 88 kps [\d.]+ orig-kb 1712\]"$/,
+ "got proper NEW-TAPE worker0 $handle") or die;
+like(taper_reply, qr/^PARTDONE $handle TESTCONF01 1 88 "\[sec [\d.]+ bytes 90112 kps [\d.]+ orig-kb 1712\]"$/,
"got PARTDONE for filenum 1 on second tape") or die;
-like(taper_reply, qr/^DONE $handle INPUT-GOOD TAPE-GOOD "\[sec [\d.]+ kb 600 kps [\d.]+ orig-kb 1712\]" "" ""$/,
+like(taper_reply, qr/^DONE $handle INPUT-GOOD TAPE-GOOD "\[sec [\d.]+ bytes 614400 kps [\d.]+ orig-kb 1712\]" "" ""$/,
"got DONE") or die;
taper_cmd("QUIT");
wait_for_exit();
check_logs([
- qr(^INFO taper Will write new label `TESTCONF03' to new tape$),
+ qr(^INFO taper Slot 2 with label TESTCONF02 is not reusable$),
+ qr(^INFO taper Slot 3 without label can be labeled$),
qr(^START taper datestamp $datestamp label TESTCONF03 tape 1$),
- qr(^PART taper TESTCONF03 1 localhost /u01 $datestamp 1/-1 0 \[sec [\d.]+ kb 256 kps [\d.]+ orig-kb 1612\]$),
- qr(^PART taper TESTCONF03 2 localhost /u01 $datestamp 2/-1 0 \[sec [\d.]+ kb 36 kps [\d.]+ orig-kb 1612\]$),
- qr(^DONE taper localhost /u01 $datestamp 2 0 \[sec [\d.]+ kb 292 kps [\d.]+ orig-kb 1612\]$),
- qr(^PART taper TESTCONF03 3 localhost /u02 $datestamp 1/-1 0 \[sec [\d.]+ kb 256 kps [\d.]+ orig-kb 1712\]$),
- qr(^PART taper TESTCONF03 4 localhost /u02 $datestamp 2/-1 0 \[sec [\d.]+ kb 256 kps [\d.]+ orig-kb 1712\]$),
- qr(^PARTPARTIAL taper TESTCONF03 5 localhost /u02 $datestamp 3/-1 0 \[sec [\d.]+ kb 0 kps [\d.]+ orig-kb 1712\] "No space left on device"$),
+ qr(^PART taper TESTCONF03 1 localhost /u01 $datestamp 1/-1 0 \[sec [\d.]+ bytes 262144 kps [\d.]+ orig-kb 1612\]$),
+ qr(^PART taper TESTCONF03 2 localhost /u01 $datestamp 2/-1 0 \[sec [\d.]+ bytes 37856 kps [\d.]+ orig-kb 1612\]$),
+ qr(^DONE taper localhost /u01 $datestamp 2 0 \[sec [\d.]+ bytes 300000 kps [\d.]+ orig-kb 1612\]$),
+ qr(^PART taper TESTCONF03 3 localhost /u02 $datestamp 1/-1 0 \[sec [\d.]+ bytes 262144 kps [\d.]+ orig-kb 1712\]$),
+ qr(^PART taper TESTCONF03 4 localhost /u02 $datestamp 2/-1 0 \[sec [\d.]+ bytes 262144 kps [\d.]+ orig-kb 1712\]$),
+ qr(^PARTPARTIAL taper TESTCONF03 5 localhost /u02 $datestamp 3/-1 0 \[sec [\d.]+ bytes 0 kps [\d.]+ orig-kb 1712\] "No space left on device"$),
qr(^INFO taper Will request retry of failed split part\.$),
qr(^INFO taper tape TESTCONF03 kb 804 fm 5 \[OK\]$),
- # note no "Will write new label.."
+ qr(^INFO taper Slot 1 with label TESTCONF01 is usable$),
qr(^START taper datestamp $datestamp label TESTCONF01 tape 2$),
- qr(^PART taper TESTCONF01 1 localhost /u02 $datestamp 3/-1 0 \[sec [\d.]+ kb 88 kps [\d.]+ orig-kb 1712\]$),
- qr(^DONE taper localhost /u02 $datestamp 3 0 \[sec [\d.]+ kb 600 kps [\d.]+ orig-kb 1712\]$),
+ qr(^PART taper TESTCONF01 1 localhost /u02 $datestamp 3/-1 0 \[sec [\d.]+ bytes 90112 kps [\d.]+ orig-kb 1712\]$),
+ qr(^DONE taper localhost /u02 $datestamp 3 0 \[sec [\d.]+ bytes 614400 kps [\d.]+ orig-kb 1712\]$),
qr(^INFO taper tape TESTCONF01 kb 88 fm 1 \[OK\]$),
], "second taper invocation in sequence logged correctly");
cleanup_log();
$handle = "33-55555";
$datestamp = "20090303030000";
run_taper(1024, "failure to overwrite a volume", keep_config => 1);
-like(taper_reply, qr/^TAPER-OK$/,
+like(taper_reply, qr/^TAPER-OK worker0$/,
"got TAPER-OK") or die;
make_holding_file(32768, "localhost", "/u03");
-taper_cmd("FILE-WRITE $handle \"$test_filename\" localhost /u03 0 $datestamp 262144 1812");
+taper_cmd("FILE-WRITE worker0 $handle \"$test_filename\" localhost /u03 0 $datestamp 262144 \"\" \"\" \"\" \"\" \"\" \"\" \"\" 1812");
like(taper_reply, qr/^REQUEST-NEW-TAPE $handle$/,
- "got REQUEST-NEW-TAPE") or die;
+ "got REQUEST-NEW-TAPE worker0 $handle") or die;
# we've secretly replaced the tape in slot 1 with a read-only tape.. let's see
# if anyone can tell the difference!
chmod(0555, Installcheck::Run::vtape_dir(2));
-taper_cmd("NEW-TAPE");
+taper_cmd("START-SCAN worker0 $handle");
+taper_cmd("NEW-TAPE worker0 $handle");
# NO-NEW-TAPE indicates it did *not* overwrite the tape
like(taper_reply, qr/^NO-NEW-TAPE $handle$/,
- "got proper NO-NEW-TAPE"); # no "die" here, so we can restore perms
+ "got proper NO-NEW-TAPE worker0 $handle"); # no "die" here, so we can restore perms
chmod(0755, Installcheck::Run::vtape_dir(2));
like(taper_reply, qr/^REQUEST-NEW-TAPE $handle$/,
- "got REQUEST-NEW-TAPE") or die;
-taper_cmd("NO-NEW-TAPE \"sorry\"");
-like(taper_reply, qr/^FAILED $handle INPUT-GOOD TAPE-ERROR "" "CONFIG:sorry"?.*$/,
+ "got REQUEST-NEW-TAPE worker0 $handle") or die;
+taper_cmd("NO-NEW-TAPE worker0 $handle \"sorry\"");
+like(taper_reply, qr/^FAILED $handle INPUT-GOOD TAPE-ERROR "" "?sorry"?.*$/,
"got FAILED") or die;
taper_cmd("QUIT");
wait_for_exit();
# (logs aren't that interesting here - filled with VFS-specific error messages)
-# TODO: simulate an "erased" tape, to which taper should reply with "NEW-TAPE" and
+# TODO: simulate an "erased" tape, to which taper should reply with "NEW-TAPE worker0 $handle" and
# immediately REQUEST-NEW-TAPE. I can't see a way to make the VFS device erase a
# volume without start_device succeeding.
$handle = "44-11111";
$datestamp = "20070102030405";
run_taper(4096, "no tapedev", notapedev => 1);
-like(taper_reply, qr/^TAPE-ERROR 99-9999 "You must specify one of 'tapedev' or 'tpchanger'"$/,
+like(taper_reply, qr/^TAPE-ERROR SETUP "You must specify one of 'tapedev' or 'tpchanger'"$/,
"got TAPE-ERROR") or die;
wait_for_exit();
+##
+# A run with 2 workers
+my $handle0 = "66-00000";
+my $handle1 = "66-11111";
+$datestamp = "20090202020000";
+run_taper(1024, "with 2 workers", new_vtapes => 1);
+like(taper_reply, qr/^TAPER-OK worker0$/,
+ "got TAPER-OK") or die;
+taper_cmd("START-TAPER worker1 $datestamp");
+like(taper_reply, qr/^TAPER-OK worker1$/,
+ "got TAPER-OK") or die;
+make_holding_file(300000, "localhost", "/u01");
+taper_cmd("FILE-WRITE worker0 $handle0 \"$test_filename\" localhost /u01 0 $datestamp 262144 \"\" \"\" \"\" \"\" \"\" \"\" \"\" 1612");
+like(taper_reply, qr/^REQUEST-NEW-TAPE $handle0$/,
+ "got REQUEST-NEW-TAPE worker0 $handle0") or die;
+taper_cmd("START-SCAN worker0 $handle0");
+taper_cmd("NEW-TAPE worker0 $handle0");
+like(taper_reply, qr/^NEW-TAPE $handle0 TESTCONF01$/,
+ "got proper NEW-TAPE worker0 $handle0") or die;
+like(taper_reply, qr/^PARTDONE $handle0 TESTCONF01 1 256 "\[sec [\d.]+ bytes 262144 kps [\d.]+ orig-kb 1612\]"$/,
+ "got PARTDONE for filenum 1") or die;
+like(taper_reply, qr/^PARTDONE $handle0 TESTCONF01 2 36 "\[sec [\d.]+ bytes 37856 kps [\d.]+ orig-kb 1612\]"$/,
+ "got PARTDONE for filenum 2") or die;
+like(taper_reply, qr/^DONE $handle0 INPUT-GOOD TAPE-GOOD "\[sec [\d.]+ bytes 300000 kps [\d.]+ orig-kb 1612\]" "" ""$/,
+ "got DONE") or die;
+make_holding_file(614400, "localhost", "/u02");
+taper_cmd("FILE-WRITE worker1 $handle1 \"$test_filename\" localhost /u02 0 $datestamp 262144 \"\" \"\" \"\" \"\" \"\" \"\" \"\" 1712");
+like(taper_reply, qr/^REQUEST-NEW-TAPE $handle1$/,
+ "got REQUEST-NEW-TAPE worker1 $handle1") or die;
+taper_cmd("START-SCAN worker1 $handle1");
+taper_cmd("NEW-TAPE worker1 $handle1");
+like(taper_reply, qr/^NEW-TAPE $handle1 TESTCONF02$/,
+ "got proper NEW-TAPE worker1 $handle1") or die;
+like(taper_reply, qr/^PARTDONE $handle1 TESTCONF02 1 256 "\[sec [\d.]+ bytes 262144 kps [\d.]+ orig-kb 1712\]"$/,
+ "got PARTDONE for filenum 1 on second tape") or die;
+like(taper_reply, qr/^PARTDONE $handle1 TESTCONF02 2 256 "\[sec [\d.]+ bytes 262144 kps [\d.]+ orig-kb 1712\]"$/,
+ "got PARTDONE for filenum 2 on second tape") or die;
+like(taper_reply, qr/^PARTDONE $handle1 TESTCONF02 3 88 "\[sec [\d.]+ bytes 90112 kps [\d.]+ orig-kb 1712\]"$/,
+ "got PARTDONE for filenum 3 on second tape") or die;
+like(taper_reply, qr/^DONE $handle1 INPUT-GOOD TAPE-GOOD "\[sec [\d.]+ bytes 614400 kps [\d.]+ orig-kb 1712\]" "" ""$/,
+ "got DONE") or die;
+taper_cmd("QUIT");
+wait_for_exit();
+
+check_logs([
+ qr(^INFO taper Slot 1 without label can be labeled$),
+ qr(^INFO taper Slot 2 without label can be labeled$),
+ qr(^START taper datestamp $datestamp label TESTCONF01 tape 1$),
+ qr(^PART taper TESTCONF01 1 localhost /u01 $datestamp 1/-1 0 \[sec [\d.]+ bytes 262144 kps [\d.]+ orig-kb 1612\]$),
+ qr(^PART taper TESTCONF01 2 localhost /u01 $datestamp 2/-1 0 \[sec [\d.]+ bytes 37856 kps [\d.]+ orig-kb 1612\]$),
+ qr(^DONE taper localhost /u01 $datestamp 2 0 \[sec [\d.]+ bytes 300000 kps [\d.]+ orig-kb 1612\]$),
+ qr(^START taper datestamp $datestamp label TESTCONF02 tape 2$),
+ qr(^PART taper TESTCONF02 1 localhost /u02 $datestamp 1/-1 0 \[sec [\d.]+ bytes 262144 kps [\d.]+ orig-kb 1712\]$),
+ qr(^PART taper TESTCONF02 2 localhost /u02 $datestamp 2/-1 0 \[sec [\d.]+ bytes 262144 kps [\d.]+ orig-kb 1712\]$),
+ qr(^PART taper TESTCONF02 3 localhost /u02 $datestamp 3/-1 0 \[sec [\d.]+ bytes 90112 kps [\d.]+ orig-kb 1712\]$),
+ qr(^DONE taper localhost /u02 $datestamp 3 0 \[sec [\d.]+ bytes 614400 kps [\d.]+ orig-kb 1712\]$),
+ qr(^INFO taper tape TESTCONF01 kb 292 fm 2 \[OK\]$),
+ qr(^INFO taper tape TESTCONF02 kb 600 fm 3 \[OK\]$),
+], "two workers logged correctly");
+cleanup_log();
+
+##
+# A run with 2 workers and a take_scribe
+$handle = "66-22222";
+$datestamp = "20090202020000";
+run_taper(1024, "with 2 workers and a take_scribe", new_vtapes => 1);
+like(taper_reply, qr/^TAPER-OK worker0$/,
+ "got TAPER-OK") or die;
+taper_cmd("START-TAPER worker1 $datestamp");
+like(taper_reply, qr/^TAPER-OK worker1$/,
+ "got TAPER-OK") or die;
+make_holding_file(1000000, "localhost", "/u01");
+taper_cmd("FILE-WRITE worker0 $handle \"$test_filename\" localhost /u01 0 $datestamp 262144 \"\" \"\" \"\" \"\" \"\" \"\" \"\" 1612");
+like(taper_reply, qr/^REQUEST-NEW-TAPE $handle$/,
+ "got REQUEST-NEW-TAPE worker0 $handle") or die;
+taper_cmd("START-SCAN worker0 $handle");
+taper_cmd("NEW-TAPE worker0 $handle");
+like(taper_reply, qr/^NEW-TAPE $handle TESTCONF01$/,
+ "got proper NEW-TAPE worker0 $handle") or die;
+like(taper_reply, qr/^PARTDONE $handle TESTCONF01 1 256 "\[sec [\d.]+ bytes 262144 kps [\d.]+ orig-kb 1612\]"$/,
+ "got PARTDONE for filenum 1") or die;
+like(taper_reply, qr/^PARTDONE $handle TESTCONF01 2 256 "\[sec [\d.]+ bytes 262144 kps [\d.]+ orig-kb 1612\]"$/,
+ "got PARTDONE for filenum 2") or die;
+like(taper_reply, qr/^PARTDONE $handle TESTCONF01 3 256 "\[sec [\d.]+ bytes 262144 kps [\d.]+ orig-kb 1612\]"$/,
+ "got PARTDONE for filenum 3") or die;
+like(taper_reply, qr/^REQUEST-NEW-TAPE $handle$/,
+ "got REQUEST-NEW-TAPE worker0 $handle") or die;
+taper_cmd("TAKE-SCRIBE-FROM worker0 $handle worker1");
+like(taper_reply, qr/^REQUEST-NEW-TAPE $handle$/,
+ "got REQUEST-NEW-TAPE worker0 $handle") or die;
+taper_cmd("START-SCAN worker0 $handle");
+taper_cmd("NEW-TAPE worker0 $handle");
+like(taper_reply, qr/^NEW-TAPE $handle TESTCONF02$/,
+ "got proper NEW-TAPE worker0 $handle") or die;
+like(taper_reply, qr/^PARTDONE $handle TESTCONF02 1 208 "\[sec [\d.]+ bytes 213568 kps [\d.]+ orig-kb 1612\]"$/,
+ "got PARTDONE for filenum 4") or die;
+like(taper_reply, qr/^DONE $handle INPUT-GOOD TAPE-GOOD "\[sec [\d.]+ bytes 1000000 kps [\d.]+ orig-kb 1612\]" "" ""$/,
+ "got DONE") or die;
+taper_cmd("QUIT");
+wait_for_exit();
+
+check_logs([
+ qr(^INFO taper Slot 1 without label can be labeled$),
+ qr(^INFO taper Slot 2 without label can be labeled$),
+ qr(^START taper datestamp $datestamp label TESTCONF01 tape 1$),
+ qr(^PART taper TESTCONF01 1 localhost /u01 $datestamp 1/-1 0 \[sec [\d.]+ bytes 262144 kps [\d.]+ orig-kb 1612\]$),
+ qr(^PART taper TESTCONF01 2 localhost /u01 $datestamp 2/-1 0 \[sec [\d.]+ bytes 262144 kps [\d.]+ orig-kb 1612\]$),
+ qr(^PART taper TESTCONF01 3 localhost /u01 $datestamp 3/-1 0 \[sec [\d.]+ bytes 262144 kps [\d.]+ orig-kb 1612\]$),
+ qr(^PARTPARTIAL taper TESTCONF01 4 localhost /u01 $datestamp 4/-1 0 \[sec [\d.]+ bytes 98304 kps [\d.]+ orig-kb 1612\] \"No space left on device\"$),
+ qr(^INFO taper Will request retry of failed split part.$),
+ qr(^INFO taper tape TESTCONF01 kb 768 fm 4 \[OK\]$),
+ qr(^START taper datestamp $datestamp label TESTCONF02 tape 2$),
+ qr(^PART taper TESTCONF02 1 localhost /u01 $datestamp 4/-1 0 \[sec [\d.]+ bytes 213568 kps [\d.]+ orig-kb 1612\]$),
+ qr(^DONE taper localhost /u01 $datestamp 4 0 \[sec [\d.]+ bytes 1000000 kps [\d.]+ orig-kb 1612\]$),
+ qr(^INFO taper tape TESTCONF02 kb 208 fm 1 \[OK\]$),
+], "TAKE-SCRIBE logged correctly");
+cleanup_log();
+
##
# Test with NDMP device (DirectTCP)
$datestamp = "19780615010305";
run_taper(4096, "multipart directtcp PORT-WRITE",
ndmp_server => $ndmp);
- like(taper_reply, qr/^TAPER-OK$/,
+ like(taper_reply, qr/^TAPER-OK worker0$/,
"got TAPER-OK") or die;
- # note that Amanda uses the fallback splitsize here, even though it doesn't
- # need a disk_splitbuffer
- taper_cmd("PORT-WRITE $handle localhost /var 0 $datestamp 524288 NULL 393216");
- like(taper_reply, qr/^PORT (\d+) "?(\d+\.\d+\.\d+\.\d+:\d+;?)+"?$/,
+ # note that, with the addition of the new splitting params, this does the "sensible"
+ # thing and uses the tape_splitsize, not the fallback_splitsize (this is a change from
+ # Amanda-3.1)
+ taper_cmd("PORT-WRITE worker0 $handle localhost /var 0 $datestamp 393216 \"\" 327680 \"\" \"\" \"\" \"\" \"\" DIRECTTCP");
+ like(taper_reply, qr/^PORT worker0 $handle (\d+) "?(\d+\.\d+\.\d+\.\d+:\d+;?)+"?$/,
"got PORT with data address");
write_to_port($last_taper_reply, 1230*1024, "localhost", "/var", 0);
like(taper_reply, qr/^REQUEST-NEW-TAPE $handle$/,
- "got REQUEST-NEW-TAPE") or die;
- taper_cmd("NEW-TAPE");
+ "got REQUEST-NEW-TAPE worker0 $handle") or die;
+ taper_cmd("START-SCAN worker0 $handle");
+ taper_cmd("NEW-TAPE worker0 $handle");
like(taper_reply, qr/^NEW-TAPE $handle TESTCONF01$/,
- "got proper NEW-TAPE") or die;
- like(taper_reply, qr/^PARTDONE $handle TESTCONF01 1 384 "\[sec [\d.]+ kb 384 kps [\d.]+\]"$/,
+ "got proper NEW-TAPE worker0 $handle") or die;
+ like(taper_reply, qr/^PARTDONE $handle TESTCONF01 1 384 "\[sec [\d.]+ bytes 393216 kps [\d.]+\]"$/,
"got PARTDONE for part 1") or die;
- like(taper_reply, qr/^PARTDONE $handle TESTCONF01 2 384 "\[sec [\d.]+ kb 384 kps [\d.]+\]"$/,
+ like(taper_reply, qr/^PARTDONE $handle TESTCONF01 2 384 "\[sec [\d.]+ bytes 393216 kps [\d.]+\]"$/,
"got PARTDONE for part 2") or die;
- like(taper_reply, qr/^PARTDONE $handle TESTCONF01 3 64 "\[sec [\d.]+ kb 64 kps [\d.]+\]"$/,
+ like(taper_reply, qr/^PARTDONE $handle TESTCONF01 3 64 "\[sec [\d.]+ bytes 65536 kps [\d.]+\]"$/,
"got PARTDONE for part 3 (short part)") or die;
like(taper_reply, qr/^REQUEST-NEW-TAPE $handle$/,
- "got REQUEST-NEW-TAPE") or die;
- taper_cmd("NEW-TAPE");
+ "got REQUEST-NEW-TAPE worker0 $handle") or die;
+ taper_cmd("START-SCAN worker0 $handle");
+ taper_cmd("NEW-TAPE worker0 $handle");
like(taper_reply, qr/^NEW-TAPE $handle TESTCONF02$/,
- "got proper NEW-TAPE") or die;
- like(taper_reply, qr/^PARTDONE $handle TESTCONF02 1 384 "\[sec [\d.]+ kb 384 kps [\d.]+\]"$/,
+ "got proper NEW-TAPE worker0 $handle") or die;
+ like(taper_reply, qr/^PARTDONE $handle TESTCONF02 1 384 "\[sec [\d.]+ bytes 393216 kps [\d.]+\]"$/,
"got PARTDONE for part 4") or die;
- like(taper_reply, qr/^PARTDONE $handle TESTCONF02 2 32 "\[sec [\d.]+ kb 32 kps [\d.]+\]"$/,
+ like(taper_reply, qr/^PARTDONE $handle TESTCONF02 2 32 "\[sec [\d.]+ bytes 32768 kps [\d.]+\]"$/,
"got PARTDONE for part 5") or die;
like(taper_reply, qr/^DUMPER-STATUS $handle$/,
"got DUMPER-STATUS request") or die;
- taper_cmd("DONE $handle 1912");
- like(taper_reply, qr/^DONE $handle INPUT-GOOD TAPE-GOOD "\[sec [\d.]+ kb 1248 kps [\d.]+ orig-kb 1912\]" "" ""$/,
+ taper_cmd("DONE worker0 $handle 1912");
+ like(taper_reply, qr/^DONE $handle INPUT-GOOD TAPE-GOOD "\[sec [\d.]+ bytes 1277952 kps [\d.]+ orig-kb 1912\]" "" ""$/,
"got DONE") or die;
$handle = "55-22222";
- taper_cmd("PORT-WRITE $handle localhost /etc 0 $datestamp 524288 NULL 393216");
- like(taper_reply, qr/^PORT (\d+) "?(\d+\.\d+\.\d+\.\d+:\d+;?)+"?$/,
+ taper_cmd("PORT-WRITE worker0 $handle localhost /etc 0 $datestamp 524288 \"\" 393216 \"\" \"\" \"\" \"\" \"\" DIRECTTCP");
+ like(taper_reply, qr/^PORT worker0 $handle (\d+) "?(\d+\.\d+\.\d+\.\d+:\d+;?)+"?$/,
"got PORT with data address");
write_to_port($last_taper_reply, 300*1024, "localhost", "/etc", 0);
- like(taper_reply, qr/^PARTDONE $handle TESTCONF02 3 320 "\[sec [\d.]+ kb 320 kps [\d.]+\]"$/,
+ like(taper_reply, qr/^PARTDONE $handle TESTCONF02 3 320 "\[sec [\d.]+ bytes 327680 kps [\d.]+\]"$/,
"got PARTDONE for part 1") or die;
like(taper_reply, qr/^DUMPER-STATUS $handle$/,
"got DUMPER-STATUS request") or die;
- taper_cmd("DONE $handle 2012");
- like(taper_reply, qr/^DONE $handle INPUT-GOOD TAPE-GOOD "\[sec [\d.]+ kb 320 kps [\d.]+ orig-kb 2012\]" "" ""$/,
+ taper_cmd("DONE worker0 $handle 2012");
+ like(taper_reply, qr/^DONE $handle INPUT-GOOD TAPE-GOOD "\[sec [\d.]+ bytes 327680 kps [\d.]+ orig-kb 2012\]" "" ""$/,
"got DONE") or die;
taper_cmd("QUIT");
wait_for_exit();
check_logs([
- qr(^INFO taper Will write new label `TESTCONF01' to new tape$),
+ qr(^INFO taper Slot 3 without label can be labeled$),
qr(^START taper datestamp $datestamp label TESTCONF01 tape 1$),
- qr(^PART taper TESTCONF01 1 localhost /var $datestamp 1/-1 0 \[sec [\d.]+ kb 384 kps [\d.]+\]$),
- qr(^PART taper TESTCONF01 2 localhost /var $datestamp 2/-1 0 \[sec [\d.]+ kb 384 kps [\d.]+\]$),
- qr(^PART taper TESTCONF01 3 localhost /var $datestamp 3/-1 0 \[sec [\d.]+ kb 64 kps [\d.]+\]$),
+ qr(^PART taper TESTCONF01 1 localhost /var $datestamp 1/-1 0 \[sec [\d.]+ bytes 393216 kps [\d.]+\]$),
+ qr(^PART taper TESTCONF01 2 localhost /var $datestamp 2/-1 0 \[sec [\d.]+ bytes 393216 kps [\d.]+\]$),
+ qr(^PART taper TESTCONF01 3 localhost /var $datestamp 3/-1 0 \[sec [\d.]+ bytes 65536 kps [\d.]+\]$),
# note no "Will retry.."
qr(^INFO taper tape TESTCONF01 kb 832 fm 3 \[OK\]$),
- qr(^INFO taper Will write new label `TESTCONF02' to new tape$),
+ qr(^INFO taper Slot 4 without label can be labeled$),
qr(^START taper datestamp $datestamp label TESTCONF02 tape 2$),
- qr(^PART taper TESTCONF02 1 localhost /var $datestamp 4/-1 0 \[sec [\d.]+ kb 384 kps [\d.]+\]$),
- qr(^PART taper TESTCONF02 2 localhost /var $datestamp 5/-1 0 \[sec [\d.]+ kb 32 kps [\d.]+\]$),
- qr(^DONE taper localhost /var $datestamp 5 0 \[sec [\d.]+ kb 1248 kps [\d.]+ orig-kb 1912\]$),
- qr(^PART taper TESTCONF02 3 localhost /etc $datestamp 1/-1 0 \[sec [\d.]+ kb 320 kps [\d.]+\]$),
- qr(^DONE taper localhost /etc $datestamp 1 0 \[sec [\d.]+ kb 320 kps [\d.]+ orig-kb 2012\]$),
+ qr(^PART taper TESTCONF02 1 localhost /var $datestamp 4/-1 0 \[sec [\d.]+ bytes 393216 kps [\d.]+\]$),
+ qr(^PART taper TESTCONF02 2 localhost /var $datestamp 5/-1 0 \[sec [\d.]+ bytes 32768 kps [\d.]+\]$),
+ qr(^DONE taper localhost /var $datestamp 5 0 \[sec [\d.]+ bytes 1277952 kps [\d.]+ orig-kb 1912\]$),
+ qr(^PART taper TESTCONF02 3 localhost /etc $datestamp 1/-1 0 \[sec [\d.]+ bytes 327680 kps [\d.]+\]$),
+ qr(^DONE taper localhost /etc $datestamp 1 0 \[sec [\d.]+ bytes 327680 kps [\d.]+ orig-kb 2012\]$),
qr(^INFO taper tape TESTCONF02 kb 736 fm 3 \[OK\]$),
], "multipart directtcp PORT-WRITE logged correctly");
$datestamp = "19780615010305";
run_taper(4096, "multipart directtcp PORT-WRITE, with a zero-byte part",
ndmp_server => $ndmp);
- like(taper_reply, qr/^TAPER-OK$/,
+ like(taper_reply, qr/^TAPER-OK worker0$/,
"got TAPER-OK") or die;
# use a different part size this time, to hit EOM "on the head"
- taper_cmd("PORT-WRITE $handle localhost /var 0 $datestamp 524288 NULL 425984");
- like(taper_reply, qr/^PORT (\d+) "?(\d+\.\d+\.\d+\.\d+:\d+;?)+"?$/,
+ taper_cmd("PORT-WRITE worker0 $handle localhost /var 0 $datestamp 425984 \"\" 327680 \"\" \"\" \"\" \"\" \"\" DIRECTTCP");
+ like(taper_reply, qr/^PORT worker0 $handle (\d+) "?(\d+\.\d+\.\d+\.\d+:\d+;?)+"?$/,
"got PORT with data address");
write_to_port($last_taper_reply, 1632*1024, "localhost", "/var", 0);
like(taper_reply, qr/^REQUEST-NEW-TAPE $handle$/,
- "got REQUEST-NEW-TAPE") or die;
- taper_cmd("NEW-TAPE");
+ "got REQUEST-NEW-TAPE worker0 $handle") or die;
+ taper_cmd("START-SCAN worker0 $handle");
+ taper_cmd("NEW-TAPE worker0 $handle");
like(taper_reply, qr/^NEW-TAPE $handle TESTCONF01$/,
- "got proper NEW-TAPE") or die;
- like(taper_reply, qr/^PARTDONE $handle TESTCONF01 1 416 "\[sec [\d.]+ kb 416 kps [\d.]+\]"$/,
+ "got proper NEW-TAPE worker0 $handle") or die;
+ like(taper_reply, qr/^PARTDONE $handle TESTCONF01 1 416 "\[sec [\d.]+ bytes 425984 kps [\d.]+\]"$/,
"got PARTDONE for part 1") or die;
- like(taper_reply, qr/^PARTDONE $handle TESTCONF01 2 416 "\[sec [\d.]+ kb 416 kps [\d.]+\]"$/,
+ like(taper_reply, qr/^PARTDONE $handle TESTCONF01 2 416 "\[sec [\d.]+ bytes 425984 kps [\d.]+\]"$/,
"got PARTDONE for part 2") or die;
# note: zero-byte part is not reported as PARTDONE
like(taper_reply, qr/^REQUEST-NEW-TAPE $handle$/,
- "got REQUEST-NEW-TAPE") or die;
- taper_cmd("NEW-TAPE");
+ "got REQUEST-NEW-TAPE worker0 $handle") or die;
+ taper_cmd("START-SCAN worker0 $handle");
+ taper_cmd("NEW-TAPE worker0 $handle");
like(taper_reply, qr/^NEW-TAPE $handle TESTCONF02$/,
- "got proper NEW-TAPE") or die;
- like(taper_reply, qr/^PARTDONE $handle TESTCONF02 1 416 "\[sec [\d.]+ kb 416 kps [\d.]+\]"$/,
+ "got proper NEW-TAPE worker0 $handle") or die;
+ like(taper_reply, qr/^PARTDONE $handle TESTCONF02 1 416 "\[sec [\d.]+ bytes 425984 kps [\d.]+\]"$/,
"got PARTDONE for part 3") or die;
- like(taper_reply, qr/^PARTDONE $handle TESTCONF02 2 384 "\[sec [\d.]+ kb 384 kps [\d.]+\]"$/,
+ like(taper_reply, qr/^PARTDONE $handle TESTCONF02 2 384 "\[sec [\d.]+ bytes 393216 kps [\d.]+\]"$/,
"got PARTDONE for part 4") or die;
like(taper_reply, qr/^DUMPER-STATUS $handle$/,
"got DUMPER-STATUS request") or die;
- taper_cmd("DONE $handle 2112");
- like(taper_reply, qr/^DONE $handle INPUT-GOOD TAPE-GOOD "\[sec [\d.]+ kb 1632 kps [\d.]+ orig-kb 2112\]" "" ""$/,
+ taper_cmd("DONE worker0 $handle 2112");
+ like(taper_reply, qr/^DONE $handle INPUT-GOOD TAPE-GOOD "\[sec [\d.]+ bytes 1671168 kps [\d.]+ orig-kb 2112\]" "" ""$/,
"got DONE") or die;
taper_cmd("QUIT");
wait_for_exit();
check_logs([
- qr(^INFO taper Will write new label `TESTCONF01' to new tape$),
+ qr(^INFO taper Slot 3 without label can be labeled$),
qr(^START taper datestamp $datestamp label TESTCONF01 tape 1$),
- qr(^PART taper TESTCONF01 1 localhost /var $datestamp 1/-1 0 \[sec [\d.]+ kb 416 kps [\d.]+\]$),
- qr(^PART taper TESTCONF01 2 localhost /var $datestamp 2/-1 0 \[sec [\d.]+ kb 416 kps [\d.]+\]$),
+ qr(^PART taper TESTCONF01 1 localhost /var $datestamp 1/-1 0 \[sec [\d.]+ bytes 425984 kps [\d.]+\]$),
+ qr(^PART taper TESTCONF01 2 localhost /var $datestamp 2/-1 0 \[sec [\d.]+ bytes 425984 kps [\d.]+\]$),
# Note: zero-byte part is not logged, but is counted in this INFO line's 'fm' field
qr(^INFO taper tape TESTCONF01 kb 832 fm 3 \[OK\]$),
- qr(^INFO taper Will write new label `TESTCONF02' to new tape$),
+ qr(^INFO taper Slot 4 without label can be labeled$),
qr(^START taper datestamp $datestamp label TESTCONF02 tape 2$),
- qr(^PART taper TESTCONF02 1 localhost /var $datestamp 3/-1 0 \[sec [\d.]+ kb 416 kps [\d.]+\]$),
- qr(^PART taper TESTCONF02 2 localhost /var $datestamp 4/-1 0 \[sec [\d.]+ kb 384 kps [\d.]+\]$),
- qr(^DONE taper localhost /var $datestamp 4 0 \[sec [\d.]+ kb 1632 kps [\d.]+ orig-kb 2112\]$),
+ qr(^PART taper TESTCONF02 1 localhost /var $datestamp 3/-1 0 \[sec [\d.]+ bytes 425984 kps [\d.]+\]$),
+ qr(^PART taper TESTCONF02 2 localhost /var $datestamp 4/-1 0 \[sec [\d.]+ bytes 393216 kps [\d.]+\]$),
+ qr(^DONE taper localhost /var $datestamp 4 0 \[sec [\d.]+ bytes 1671168 kps [\d.]+ orig-kb 2112\]$),
qr(^INFO taper tape TESTCONF02 kb 800 fm 2 \[OK\]$),
], "multipart directtcp PORT-WRITE with a zero-byte part logged correctly");
+ cleanup_log();
$ndmp->cleanup();
} # end of ndmp SKIP
+##
+# A run without LEOM and without allow-split
+$handle = "77-11111";
+$datestamp = "20090302020000";
+run_taper(1024, "without LEOM and without allow-split", new_vtapes => 1);
+make_holding_file(1024*1024, "localhost", "/usr");
+like(taper_reply, qr/^TAPER-OK worker0$/,
+ "got TAPER-OK") or die;
+taper_cmd("FILE-WRITE worker0 $handle \"$test_filename\" localhost /usr 0 $datestamp 262144 \"\" \"\" \"0\" \"\" \"\" \"\" \"\" 1612");
+like(taper_reply, qr/^REQUEST-NEW-TAPE $handle$/,
+ "got REQUEST-NEW-TAPE worker0 $handle") or die;
+taper_cmd("START-SCAN worker0 $handle");
+taper_cmd("NEW-TAPE worker0 $handle");
+like(taper_reply, qr/^NEW-TAPE $handle TESTCONF01$/,
+ "got proper NEW-TAPE worker0 $handle") or die;
+like(taper_reply, qr/^PARTIAL $handle INPUT-GOOD TAPE-ERROR "\[sec [\d.]+ bytes \d* kps [\d.]+ orig-kb 1612\]" "" "No space left on device, splitting not enabled"$/,
+ "got PARTIAL for filenum 1") or die;
+taper_cmd("QUIT");
+wait_for_exit();
+
+check_logs([
+ qr(^INFO taper Slot 1 without label can be labeled$),
+ qr(^START taper datestamp $datestamp label TESTCONF01 tape 1$),
+ qr(^PARTPARTIAL taper TESTCONF01 1 localhost /usr $datestamp 1/-1 0 \[sec [\d.]+ bytes 983040 kps [\d.]+ orig-kb 1612\] \"No space left on device\"$),
+ qr(^PARTIAL taper localhost /usr $datestamp 1 0 \[sec [\d.]+ bytes 0 kps [\d.]+ orig-kb 1612\] "No space left on device, splitting not enabled"$),
+ qr(^INFO taper tape TESTCONF01 kb 0 fm 1 \[OK\]$),
+], "without LEOM and without allow-split logged correctly");
+cleanup_log();
+
+##
+# A run with LEOM and without allow-split
+$handle = "77-11112";
+$datestamp = "20090303020000";
+run_taper(1024, "with LEOM and without allow-split", new_vtapes => 1, leom => 1);
+make_holding_file(1024*1024, "localhost", "/usr");
+like(taper_reply, qr/^TAPER-OK worker0$/,
+ "got TAPER-OK") or die;
+taper_cmd("FILE-WRITE worker0 $handle \"$test_filename\" localhost /usr 0 $datestamp 262144 \"\" \"\" \"0\" \"\" \"\" \"\" \"\" 1612");
+like(taper_reply, qr/^REQUEST-NEW-TAPE $handle$/,
+ "got REQUEST-NEW-TAPE worker0 $handle") or die;
+taper_cmd("START-SCAN worker0 $handle");
+taper_cmd("NEW-TAPE worker0 $handle");
+like(taper_reply, qr/^NEW-TAPE $handle TESTCONF01$/,
+ "got proper NEW-TAPE worker0 $handle") or die;
+like(taper_reply, qr/^PARTDONE $handle TESTCONF01 1 864 "\[sec [\d.]+ bytes 884736 kps [\d.]+ orig-kb 1612\]"$/,
+ "got PARTDONE for filenum 1") or die;
+like(taper_reply, qr/^PARTIAL $handle INPUT-GOOD TAPE-ERROR "\[sec [\d.]+ bytes 884736 kps [\d.]+ orig-kb 1612\]" "" "No space left on device, splitting not enabled"$/,
+ "got PARTIAL") or die;
+taper_cmd("QUIT");
+wait_for_exit();
+
+check_logs([
+ qr(^INFO taper Slot 1 without label can be labeled$),
+ qr(^START taper datestamp $datestamp label TESTCONF01 tape 1$),
+ qr(^PART taper TESTCONF01 1 localhost /usr $datestamp 1/-1 0 \[sec [\d.]+ bytes 884736 kps [\d.]+ orig-kb 1612\]$),
+ qr(^PARTIAL taper localhost /usr $datestamp 1 0 \[sec [\d.]+ bytes 884736 kps [\d.]+ orig-kb 1612\] "No space left on device, splitting not enabled"$),
+ qr(^INFO taper tape TESTCONF01 kb 864 fm 1 \[OK\]$),
+], "with LEOM and without allow-split logged correctly");
+cleanup_log();
+
+## test lexical with new changer
+
+##
+# A simple, one-part FILE-WRITE
+$handle = "11-11111";
+$datestamp = "20070102030405";
+run_taper(4096, "single-part and multipart FILE-WRITE", taperscan => "lexical", new_vtapes => 1);
+like(taper_reply, qr/^TAPER-OK worker0$/,
+ "got TAPER-OK") or die;
+make_holding_file(1024*1024, "localhost", "/home");
+taper_cmd("FILE-WRITE worker0 $handle \"$test_filename\" localhost /home 0 $datestamp \"\" \"\" \"\" \"\" \"\" \"\" \"\" \"\" 12");
+like(taper_reply, qr/^REQUEST-NEW-TAPE $handle$/,
+ "got REQUEST-NEW-TAPE worker0 $handle") or die;
+taper_cmd("START-SCAN worker0 $handle");
+taper_cmd("NEW-TAPE worker0 $handle");
+like(taper_reply, qr/^NEW-TAPE $handle TESTCONF01$/,
+ "got proper NEW-TAPE worker0 $handle") or die;
+like(taper_reply, qr/^PARTDONE $handle TESTCONF01 1 1024 "\[sec [\d.]+ bytes 1048576 kps [\d.]+ orig-kb 12\]"$/,
+ "got PARTDONE") or die;
+like(taper_reply, qr/^DONE $handle INPUT-GOOD TAPE-GOOD "\[sec [\d.]+ bytes 1048576 kps [\d.]+ orig-kb 12\]" "" ""$/,
+ "got DONE") or die;
+
+##
+# A multipart FILE-WRITE, using the same taper instance
+# (note that the third part is of length 0, and is not logged)
+
+$handle = '11-22222';
+make_holding_file(1024*1024, "localhost", "/usr");
+taper_cmd("FILE-WRITE worker0 $handle \"$test_filename\" localhost /usr 0 $datestamp 524288 \"\" \"\" 1 \"\" \"\" \"\" \"\" 512");
+like(taper_reply, qr/^PARTDONE $handle TESTCONF01 2 512 "\[sec [\d.]+ bytes 524288 kps [\d.]+ orig-kb 512\]"$/,
+ "got PARTDONE for filenum 2") or die;
+like(taper_reply, qr/^PARTDONE $handle TESTCONF01 3 512 "\[sec [\d.]+ bytes 524288 kps [\d.]+ orig-kb 512\]"$/,
+ "got PARTDONE for filenum 3") or die;
+like(taper_reply, qr/^DONE $handle INPUT-GOOD TAPE-GOOD "\[sec [\d.]+ bytes 1048576 kps [\d.]+ orig-kb 512\]" "" ""$/,
+ "got DONE") or die;
+taper_cmd("QUIT");
+wait_for_exit();
+
+check_logs([
+ qr(^INFO taper Slot 1 without label can be labeled$),
+ qr(^START taper datestamp $datestamp label TESTCONF01 tape 1$),
+ qr(^PART taper TESTCONF01 1 localhost /home $datestamp 1/-1 0 \[sec [\d.]+ bytes 1048576 kps [\d.]+ orig-kb 12\]$),
+ qr(^DONE taper localhost /home $datestamp 1 0 \[sec [\d.]+ bytes 1048576 kps [\d.]+ orig-kb 12\]$),
+ qr(^PART taper TESTCONF01 2 localhost /usr $datestamp 1/-1 0 \[sec [\d.]+ bytes 524288 kps [\d.]+ orig-kb 512\]$),
+ qr(^PART taper TESTCONF01 3 localhost /usr $datestamp 2/-1 0 \[sec [\d.]+ bytes 524288 kps [\d.]+ orig-kb 512\]$),
+ qr(^DONE taper localhost /usr $datestamp 2 0 \[sec [\d.]+ bytes 1048576 kps [\d.]+ orig-kb 512\]$),
+ qr(^INFO taper tape TESTCONF01 kb 2048 fm 4 \[OK\]$),
+], "single-part and multi-part dump logged correctly");
+
+##
+# Test a sequence of writes to the same set of tapes
+
+$handle = "33-11111";
+$datestamp = "20090101010000";
+run_taper(1024, "first in a sequence", taperscan => "lexical", new_vtapes => 1);
+like(taper_reply, qr/^TAPER-OK worker0$/,
+ "got TAPER-OK") or die;
+make_holding_file(500000, "localhost", "/u01");
+taper_cmd("FILE-WRITE worker0 $handle \"$test_filename\" localhost /u01 0 $datestamp 262144 \"\" \"\" \"\" \"\" \"\" \"\" \"\" 1412");
+like(taper_reply, qr/^REQUEST-NEW-TAPE $handle$/,
+ "got REQUEST-NEW-TAPE worker0 $handle") or die;
+taper_cmd("START-SCAN worker0 $handle");
+taper_cmd("NEW-TAPE worker0 $handle");
+like(taper_reply, qr/^NEW-TAPE $handle TESTCONF01$/,
+ "got proper NEW-TAPE worker0 $handle") or die;
+like(taper_reply, qr/^PARTDONE $handle TESTCONF01 1 256 "\[sec [\d.]+ bytes 262144 kps [\d.]+ orig-kb 1412\]"$/,
+ "got PARTDONE for filenum 1") or die;
+like(taper_reply, qr/^PARTDONE $handle TESTCONF01 2 232 "\[sec [\d.]+ bytes 237856 kps [\d.]+ orig-kb 1412\]"$/,
+ "got PARTDONE for filenum 2") or die;
+like(taper_reply, qr/^DONE $handle INPUT-GOOD TAPE-GOOD "\[sec [\d.]+ bytes 500000 kps [\d.]+ orig-kb 1412\]" "" ""$/,
+ "got DONE") or die;
+$handle = "33-22222";
+make_holding_file(614400, "localhost", "/u02");
+taper_cmd("FILE-WRITE worker0 $handle \"$test_filename\" localhost /u02 0 $datestamp 262144 \"\" \"\" \"\" \"\" \"\" \"\" \"\" 1512");
+like(taper_reply, qr/^PARTDONE $handle TESTCONF01 3 256 "\[sec [\d.]+ bytes 262144 kps [\d.]+ orig-kb 1512\]"$/,
+ "got PARTDONE for filenum 3") or die;
+like(taper_reply, qr/^REQUEST-NEW-TAPE $handle$/,
+ "got REQUEST-NEW-TAPE worker0 $handle") or die;
+taper_cmd("START-SCAN worker0 $handle");
+taper_cmd("NEW-TAPE worker0 $handle");
+like(taper_reply, qr/^NEW-TAPE $handle TESTCONF02$/,
+ "got proper NEW-TAPE worker0 $handle") or die;
+like(taper_reply, qr/^PARTDONE $handle TESTCONF02 1 256 "\[sec [\d.]+ bytes 262144 kps [\d.]+ orig-kb 1512\]"$/,
+ "got PARTDONE for filenum 1 on second tape") or die;
+like(taper_reply, qr/^PARTDONE $handle TESTCONF02 2 88 "\[sec [\d.]+ bytes 90112 kps [\d.]+ orig-kb 1512\]"$/,
+ "got PARTDONE for filenum 2 on second tape") or die;
+like(taper_reply, qr/^DONE $handle INPUT-GOOD TAPE-GOOD "\[sec [\d.]+ bytes 614400 kps [\d.]+ orig-kb 1512\]" "" ""$/,
+ "got DONE") or die;
+taper_cmd("QUIT");
+wait_for_exit();
+
+check_logs([
+ qr(^INFO taper Slot 1 without label can be labeled$),
+ qr(^START taper datestamp $datestamp label TESTCONF01 tape 1$),
+ qr(^PART taper TESTCONF01 1 localhost /u01 $datestamp 1/-1 0 \[sec [\d.]+ bytes 262144 kps [\d.]+ orig-kb 1412\]$),
+ qr(^PART taper TESTCONF01 2 localhost /u01 $datestamp 2/-1 0 \[sec [\d.]+ bytes 237856 kps [\d.]+ orig-kb 1412\]$),
+ qr(^DONE taper localhost /u01 $datestamp 2 0 \[sec [\d.]+ bytes 500000 kps [\d.]+ orig-kb 1412\]$),
+ qr(^PART taper TESTCONF01 3 localhost /u02 $datestamp 1/-1 0 \[sec [\d.]+ bytes 262144 kps [\d.]+ orig-kb 1512\]$),
+ qr(^PARTPARTIAL taper TESTCONF01 4 localhost /u02 $datestamp 2/-1 0 \[sec [\d.]+ bytes 98304 kps [\d.]+ orig-kb 1512\] "No space left on device"$),
+ qr(^INFO taper Will request retry of failed split part\.$),
+ qr(^INFO taper tape TESTCONF01 kb 744 fm 4 \[OK\]$),
+ qr(^INFO taper Slot 2 without label can be labeled$),
+ qr(^START taper datestamp $datestamp label TESTCONF02 tape 2$),
+ qr(^PART taper TESTCONF02 1 localhost /u02 $datestamp 2/-1 0 \[sec [\d.]+ bytes 262144 kps [\d.]+ orig-kb 1512\]$),
+ qr(^PART taper TESTCONF02 2 localhost /u02 $datestamp 3/-1 0 \[sec [\d.]+ bytes 90112 kps [\d.]+ orig-kb 1512\]$),
+ qr(^DONE taper localhost /u02 $datestamp 3 0 \[sec [\d.]+ bytes 614400 kps [\d.]+ orig-kb 1512\]$),
+ qr(^INFO taper tape TESTCONF02 kb 344 fm 2 \[OK\]$),
+], "first taper invocation in sequence logged correctly");
+cleanup_log();
+
+$handle = "33-33333";
+$datestamp = "20090202020000";
+run_taper(1024, "second in a sequence", keep_config => 1);
+like(taper_reply, qr/^TAPER-OK worker0$/,
+ "got TAPER-OK") or die;
+make_holding_file(300000, "localhost", "/u01");
+taper_cmd("FILE-WRITE worker0 $handle \"$test_filename\" localhost /u01 0 $datestamp 262144 \"\" \"\" \"\" \"\" \"\" \"\" \"\" 1612");
+like(taper_reply, qr/^REQUEST-NEW-TAPE $handle$/,
+ "got REQUEST-NEW-TAPE worker0 $handle") or die;
+taper_cmd("START-SCAN worker0 $handle");
+taper_cmd("NEW-TAPE worker0 $handle");
+like(taper_reply, qr/^NEW-TAPE $handle TESTCONF03$/,
+ "got proper NEW-TAPE worker0 $handle") or die;
+like(taper_reply, qr/^PARTDONE $handle TESTCONF03 1 256 "\[sec [\d.]+ bytes 262144 kps [\d.]+ orig-kb 1612\]"$/,
+ "got PARTDONE for filenum 1") or die;
+like(taper_reply, qr/^PARTDONE $handle TESTCONF03 2 36 "\[sec [\d.]+ bytes 37856 kps [\d.]+ orig-kb 1612\]"$/,
+ "got PARTDONE for filenum 2") or die;
+like(taper_reply, qr/^DONE $handle INPUT-GOOD TAPE-GOOD "\[sec [\d.]+ bytes 300000 kps [\d.]+ orig-kb 1612\]" "" ""$/,
+ "got DONE") or die;
+$handle = "33-44444";
+make_holding_file(614400, "localhost", "/u02");
+taper_cmd("FILE-WRITE worker0 $handle \"$test_filename\" localhost /u02 0 $datestamp 262144 \"\" \"\" \"\" \"\" \"\" \"\" \"\" 1712");
+like(taper_reply, qr/^PARTDONE $handle TESTCONF03 3 256 "\[sec [\d.]+ bytes 262144 kps [\d.]+ orig-kb 1712\]"$/,
+ "got PARTDONE for filenum 3") or die;
+like(taper_reply, qr/^PARTDONE $handle TESTCONF03 4 256 "\[sec [\d.]+ bytes 262144 kps [\d.]+ orig-kb 1712\]"$/,
+ "got PARTDONE for filenum 4") or die;
+like(taper_reply, qr/^REQUEST-NEW-TAPE $handle$/,
+ "got REQUEST-NEW-TAPE worker0 $handle") or die;
+taper_cmd("START-SCAN worker0 $handle");
+taper_cmd("NEW-TAPE worker0 $handle");
+like(taper_reply, qr/^NEW-TAPE $handle TESTCONF01$/,
+ "got proper NEW-TAPE worker0 $handle") or die;
+like(taper_reply, qr/^PARTDONE $handle TESTCONF01 1 88 "\[sec [\d.]+ bytes 90112 kps [\d.]+ orig-kb 1712\]"$/,
+ "got PARTDONE for filenum 1 on second tape") or die;
+like(taper_reply, qr/^DONE $handle INPUT-GOOD TAPE-GOOD "\[sec [\d.]+ bytes 614400 kps [\d.]+ orig-kb 1712\]" "" ""$/,
+ "got DONE") or die;
+taper_cmd("QUIT");
+wait_for_exit();
+
+check_logs([
+ qr(^INFO taper Slot 3 without label can be labeled$),
+ qr(^START taper datestamp $datestamp label TESTCONF03 tape 1$),
+ qr(^PART taper TESTCONF03 1 localhost /u01 $datestamp 1/-1 0 \[sec [\d.]+ bytes 262144 kps [\d.]+ orig-kb 1612\]$),
+ qr(^PART taper TESTCONF03 2 localhost /u01 $datestamp 2/-1 0 \[sec [\d.]+ bytes 37856 kps [\d.]+ orig-kb 1612\]$),
+ qr(^DONE taper localhost /u01 $datestamp 2 0 \[sec [\d.]+ bytes 300000 kps [\d.]+ orig-kb 1612\]$),
+ qr(^PART taper TESTCONF03 3 localhost /u02 $datestamp 1/-1 0 \[sec [\d.]+ bytes 262144 kps [\d.]+ orig-kb 1712\]$),
+ qr(^PART taper TESTCONF03 4 localhost /u02 $datestamp 2/-1 0 \[sec [\d.]+ bytes 262144 kps [\d.]+ orig-kb 1712\]$),
+ qr(^PARTPARTIAL taper TESTCONF03 5 localhost /u02 $datestamp 3/-1 0 \[sec [\d.]+ bytes 0 kps [\d.]+ orig-kb 1712\] "No space left on device"$),
+ qr(^INFO taper Will request retry of failed split part\.$),
+ qr(^INFO taper tape TESTCONF03 kb 804 fm 5 \[OK\]$),
+ qr(^INFO taper Slot 1 with label TESTCONF01 is usable$),
+ qr(^START taper datestamp $datestamp label TESTCONF01 tape 2$),
+ qr(^PART taper TESTCONF01 1 localhost /u02 $datestamp 3/-1 0 \[sec [\d.]+ bytes 90112 kps [\d.]+ orig-kb 1712\]$),
+ qr(^DONE taper localhost /u02 $datestamp 3 0 \[sec [\d.]+ bytes 614400 kps [\d.]+ orig-kb 1712\]$),
+ qr(^INFO taper tape TESTCONF01 kb 88 fm 1 \[OK\]$),
+], "second taper invocation in sequence logged correctly");
+cleanup_log();
+
+##
+# A run with a bogus tapedev/tpchanger
+$handle = "44-11111";
+$datestamp = "20070102030405";
+run_taper(4096, "no tapedev", notapedev => 1, taperscan => "lexical", new_vtapes => 1);
+like(taper_reply, qr/^TAPE-ERROR SETUP "You must specify one of 'tapedev' or 'tpchanger'"$/,
+ "got TAPE-ERROR") or die;
+wait_for_exit();
+
+##
+# A run with 2 workers
+$handle0 = "66-00000";
+$handle1 = "66-11111";
+$datestamp = "20090202020000";
+run_taper(1024, "with 2 workers", new_vtapes => 1, taperscan => "lexical", new_vtapes => 1);
+like(taper_reply, qr/^TAPER-OK worker0$/,
+ "got TAPER-OK") or die;
+taper_cmd("START-TAPER worker1 $datestamp");
+like(taper_reply, qr/^TAPER-OK worker1$/,
+ "got TAPER-OK") or die;
+make_holding_file(300000, "localhost", "/u01");
+taper_cmd("FILE-WRITE worker0 $handle0 \"$test_filename\" localhost /u01 0 $datestamp 262144 \"\" \"\" \"\" \"\" \"\" \"\" \"\" 1612");
+like(taper_reply, qr/^REQUEST-NEW-TAPE $handle0$/,
+ "got REQUEST-NEW-TAPE worker0 $handle0") or die;
+taper_cmd("START-SCAN worker0 $handle0");
+taper_cmd("NEW-TAPE worker0 $handle0");
+like(taper_reply, qr/^NEW-TAPE $handle0 TESTCONF01$/,
+ "got proper NEW-TAPE worker0 $handle0") or die;
+like(taper_reply, qr/^PARTDONE $handle0 TESTCONF01 1 256 "\[sec [\d.]+ bytes 262144 kps [\d.]+ orig-kb 1612\]"$/,
+ "got PARTDONE for filenum 1") or die;
+like(taper_reply, qr/^PARTDONE $handle0 TESTCONF01 2 36 "\[sec [\d.]+ bytes 37856 kps [\d.]+ orig-kb 1612\]"$/,
+ "got PARTDONE for filenum 2") or die;
+like(taper_reply, qr/^DONE $handle0 INPUT-GOOD TAPE-GOOD "\[sec [\d.]+ bytes 300000 kps [\d.]+ orig-kb 1612\]" "" ""$/,
+ "got DONE") or die;
+make_holding_file(614400, "localhost", "/u02");
+taper_cmd("FILE-WRITE worker1 $handle1 \"$test_filename\" localhost /u02 0 $datestamp 262144 \"\" \"\" \"\" \"\" \"\" \"\" \"\" 1712");
+like(taper_reply, qr/^REQUEST-NEW-TAPE $handle1$/,
+ "got REQUEST-NEW-TAPE worker1 $handle1") or die;
+taper_cmd("START-SCAN worker1 $handle1");
+taper_cmd("NEW-TAPE worker1 $handle1");
+like(taper_reply, qr/^NEW-TAPE $handle1 TESTCONF02$/,
+ "got proper NEW-TAPE worker1 $handle1") or die;
+like(taper_reply, qr/^PARTDONE $handle1 TESTCONF02 1 256 "\[sec [\d.]+ bytes 262144 kps [\d.]+ orig-kb 1712\]"$/,
+ "got PARTDONE for filenum 1 on second tape") or die;
+like(taper_reply, qr/^PARTDONE $handle1 TESTCONF02 2 256 "\[sec [\d.]+ bytes 262144 kps [\d.]+ orig-kb 1712\]"$/,
+ "got PARTDONE for filenum 2 on second tape") or die;
+like(taper_reply, qr/^PARTDONE $handle1 TESTCONF02 3 88 "\[sec [\d.]+ bytes 90112 kps [\d.]+ orig-kb 1712\]"$/,
+ "got PARTDONE for filenum 3 on second tape") or die;
+like(taper_reply, qr/^DONE $handle1 INPUT-GOOD TAPE-GOOD "\[sec [\d.]+ bytes 614400 kps [\d.]+ orig-kb 1712\]" "" ""$/,
+ "got DONE") or die;
+taper_cmd("QUIT");
+wait_for_exit();
+
+check_logs([
+ qr(^INFO taper Slot 1 without label can be labeled$),
+ qr(^INFO taper Slot 1 is already in use by drive.*$),
+ qr(^INFO taper Slot 2 without label can be labeled$),
+ qr(^START taper datestamp $datestamp label TESTCONF01 tape 1$),
+ qr(^PART taper TESTCONF01 1 localhost /u01 $datestamp 1/-1 0 \[sec [\d.]+ bytes 262144 kps [\d.]+ orig-kb 1612\]$),
+ qr(^PART taper TESTCONF01 2 localhost /u01 $datestamp 2/-1 0 \[sec [\d.]+ bytes 37856 kps [\d.]+ orig-kb 1612\]$),
+ qr(^DONE taper localhost /u01 $datestamp 2 0 \[sec [\d.]+ bytes 300000 kps [\d.]+ orig-kb 1612\]$),
+ qr(^START taper datestamp $datestamp label TESTCONF02 tape 2$),
+ qr(^PART taper TESTCONF02 1 localhost /u02 $datestamp 1/-1 0 \[sec [\d.]+ bytes 262144 kps [\d.]+ orig-kb 1712\]$),
+ qr(^PART taper TESTCONF02 2 localhost /u02 $datestamp 2/-1 0 \[sec [\d.]+ bytes 262144 kps [\d.]+ orig-kb 1712\]$),
+ qr(^PART taper TESTCONF02 3 localhost /u02 $datestamp 3/-1 0 \[sec [\d.]+ bytes 90112 kps [\d.]+ orig-kb 1712\]$),
+ qr(^DONE taper localhost /u02 $datestamp 3 0 \[sec [\d.]+ bytes 614400 kps [\d.]+ orig-kb 1712\]$),
+ qr(^INFO taper tape TESTCONF01 kb 292 fm 2 \[OK\]$),
+ qr(^INFO taper tape TESTCONF02 kb 600 fm 3 \[OK\]$),
+], "two workers logged correctly");
+cleanup_log();
+
cleanup_taper();
projects / debian / amanda / blobdiff