# Contact information: Zmanda Inc, 465 S. Mathilda Ave., Suite 300
# Sunnyvale, CA 94086, USA, or: http://www.zmanda.com
-use Test::More tests => 2;
+use Test::More tests => 11;
+use strict;
+use warnings;
use lib "@amperldir@";
use File::Path;
+use Data::Dumper;
use Installcheck;
use Installcheck::Dumpcache;
use Installcheck::Config;
-use Installcheck::Run qw(run run_err $diskname amdump_diag);
-use Amanda::Config qw( :init );
+use Installcheck::Mock;
+use Installcheck::Run qw(run run_err run_get $diskname);
+use Amanda::DB::Catalog;
use Amanda::Paths;
+use Amanda::Config qw( :init );
+use Amanda::Changer;
+use Amanda::Debug;
+
+Amanda::Debug::dbopen("installcheck");
my $vtape_root = "$Installcheck::TMP/tertiary";
sub setup_chg_disk {
# set up a basic dump
Installcheck::Dumpcache::load("basic");
+config_init($CONFIG_INIT_EXPLICIT_NAME, "TESTCONF");
+my ($cfgerr_level, @cfgerr_errors) = config_errors();
+if ($cfgerr_level >= $CFGERR_WARNINGS) {
+ config_print_errors();
+ die "config errors";
+}
+
# and then set up a new vtape to vault onto
my $tertiary_chg = setup_chg_disk();
-ok(run("$sbindir/amvault", 'TESTCONF', 'latest', $tertiary_chg, "TESTCONF%%"),
- "amvault runs!")
+# try a few failures first
+like(run_err("$sbindir/amvault",
+ '--autolabel=any',
+ '--label-template', "TESTCONF%%",
+ '--src-timestamp', 'latest',
+ '--dst-changer', $tertiary_chg,
+ 'TESTCONF', 'someotherhost'),
+ qr/No dumps to vault/,
+ "amvault with a non-matching dumpspec dumps nothing")
or diag($Installcheck::Run::stderr);
+like(run_err("$sbindir/amvault",
+ '--autolabel=any',
+ '--label-template', "TESTCONF%%",
+ '--src-timestamp', 'latest',
+ '--fulls-only',
+ '--dst-changer', $tertiary_chg,
+ 'TESTCONF', '*', '*', '*', '1-3'),
+ qr/No dumps to vault/,
+ "amvault with --fulls-only but specifying non-full dumpspecs dumps nothing")
+ or diag($Installcheck::Run::stderr);
+
+like(run_err("$sbindir/amvault",
+ '--autolabel=any',
+ '--label-template', "TESTCONF%%",
+ '--dst-changer', $tertiary_chg,
+ 'TESTCONF'),
+ qr/specify something to select/,
+ "amvault without any limiting factors is an error"),
+ or diag($Installcheck::Run::stderr);
+
+# now a successful vaulting
+ok(run("$sbindir/amvault",
+ '--autolabel=any',
+ '--label-template', "TESTCONF%%",
+ '--src-timestamp', 'latest',
+ '--dst-changer', $tertiary_chg,
+ 'TESTCONF'),
+ "amvault runs!")
+ or diag($Installcheck::Run::stderr);
my @tert_files = glob("$vtape_root/slot1/0*");
ok(@tert_files > 0,
"..and files appear on the tertiary volume!");
+my @dumps = Amanda::DB::Catalog::sort_dumps([ 'write_timestamp' ],
+ Amanda::DB::Catalog::get_dumps());
+
+is(scalar @dumps, 2,
+ "now there are two dumps in the catalog");
+
+sub summarize {
+ my ($dump) = @_;
+ return {
+ map { $_ => $dump->{$_} }
+ qw(diskname hostname level dump_timestamp kb orig_kb)
+ };
+}
+is_deeply(summarize($dumps[1]), summarize($dumps[0]),
+ "and they match in all the right ways")
+ or diag(Dumper(@dumps));
+
+# clean up the tertiary vtapes before moving on
rmtree $vtape_root;
Installcheck::Run::cleanup();
+
+# try the multi dump, to get a better idea of the filtering possibilities
+Installcheck::Dumpcache::load("multi");
+config_init($CONFIG_INIT_EXPLICIT_NAME, "TESTCONF");
+($cfgerr_level, @cfgerr_errors) = config_errors();
+if ($cfgerr_level >= $CFGERR_WARNINGS) {
+ config_print_errors();
+ die "config errors";
+}
+
+sub get_dry_run {
+ my $stdout = run_get(@_);
+ if (!$stdout) {
+ diag($Installcheck::Run::stderr);
+ return 'run-failed';
+ }
+
+ my @rv;
+ for my $line (split /\n/, $stdout) {
+ next if ($line =~ /^Total Size:/);
+ my ($tape, $file, $host, $disk, $datestamp, $level) =
+ ($line =~ /^(\S+) (\d*) (\S+) (.+) (\d+) (\d+)$/);
+ $tape = 'holding' if $file eq '';
+ push @rv, [$tape, $file, $host, $disk, $level]; # note: no datestamp
+ }
+ return @rv;
+}
+
+is_deeply([ get_dry_run("$sbindir/amvault",
+ '--dry-run',
+ '--autolabel=any',
+ '--label-template', "TESTCONF%%",
+ '--fulls-only',
+ '--dst-changer', $tertiary_chg,
+ 'TESTCONF') ], [
+ [ "TESTCONF01", "1", "localhost", "$diskname/dir", "0" ],
+ [ "TESTCONF01", "2", "localhost", "$diskname", "0" ],
+ [ "TESTCONF02", "2", "localhost", "$diskname", "0" ]
+ ], "amvault with --fulls-only only dumps fulls");
+
+is_deeply([ get_dry_run("$sbindir/amvault",
+ '--dry-run',
+ '--autolabel=any',
+ '--label-template', "TESTCONF%%",
+ '--dst-changer', $tertiary_chg,
+ 'TESTCONF', "localhost", "$diskname/dir") ], [
+ [ "holding", "", "localhost", "$diskname/dir", "1" ],
+ [ "TESTCONF01", "1", "localhost", "$diskname/dir", "0" ],
+ [ "TESTCONF02", "1", "localhost", "$diskname/dir", "1" ]
+ ], "amvault with a disk expression dumps only that disk");
+
+# Test NDMP-to-NDMP vaulting. This will test all manner of goodness:
+# - specifying a named changer on the amvault command line
+# - exporting
+# - directtcp vaulting (well, not really, since we don't support connecting yet)
+SKIP: {
+ skip "not built with ndmp and server", 2 unless
+ Amanda::Util::built_with_component("ndmp") and Amanda::Util::built_with_component("server");
+
+ Installcheck::Dumpcache::load("ndmp");
+
+ my $ndmp = Installcheck::Mock::NdmpServer->new(no_reset => 1);
+ $ndmp->edit_config();
+
+ # append a tertiary changer to the config file - it's just too hard to
+ # specify a full ndmp changer on the command line
+
+ my $ndmp_port = $ndmp->{'port'};
+ my $chg_dir = "$Installcheck::TMP/vtapes/ndmjob-tert";
+ my $chg_spec = "chg-ndmp:127.0.0.1:$ndmp_port\@$chg_dir";
+ my $drive_root = "ndmp:127.0.0.1:$ndmp_port\@$chg_dir";
+
+ -d $chg_dir && rmtree($chg_dir);
+ mkpath($chg_dir);
+
+ my $amanda_conf_filename = "$CONFIG_DIR/TESTCONF/amanda.conf";
+ open(my $fh, ">>", $amanda_conf_filename);
+ print $fh <<EOF;
+define changer "tertiary" {
+ tpchanger "$chg_spec"
+ property "tape-device" "0=$drive_root/drive0"
+ property append "tape-device" "1=$drive_root/drive1"
+ changerfile "$chg_dir-changerfile"
+}
+EOF
+
+ $tertiary_chg = "tertiary";
+ ok(run("$sbindir/amvault",
+ '--export',
+ '--autolabel=any',
+ '--label-template', "TESTCONF%%",
+ '--src-timestamp', 'latest',
+ '--dst-changer', $tertiary_chg,
+ 'TESTCONF'),
+ "amvault runs with an NDMP device as secondary and tertiary, with --export")
+ or diag($Installcheck::Run::stderr);
+
+ config_init($CONFIG_INIT_EXPLICIT_NAME, "TESTCONF");
+ ($cfgerr_level, @cfgerr_errors) = config_errors();
+ if ($cfgerr_level >= $CFGERR_WARNINGS) {
+ config_print_errors();
+ die "config errors";
+ }
+
+ # query the tertiary changer to see where that dump ended up
+ my $chg = Amanda::Changer->new($tertiary_chg);
+ my $inventory;
+ my $inventory_cb = sub {
+ my ($err, $inv) = @_;
+ die "$err" if $err;
+
+ $inventory = $inv;
+ Amanda::MainLoop::quit();
+ };
+ Amanda::MainLoop::call_later(sub { $chg->inventory(inventory_cb => $inventory_cb); });
+ Amanda::MainLoop::run();
+ $chg->quit();
+
+ # find TESTCONF02 in the inventory, and check that it is in an i/e slot
+ my $notfound = "tertiary volume not found";
+ for my $i (@$inventory) {
+ if ($i->{'label'} && $i->{'label'} eq 'TESTCONF02') {
+ if ($i->{'import_export'}) {
+ $notfound = undef;
+ } else {
+ $notfound = "tertiary volume not properly exported";
+ }
+ #last;
+ }
+ }
+
+ ok(!$notfound, "tertiary volume exists and was properly exported");
+ if ($notfound) {
+ diag($notfound);
+ diag("amvault stderr:");
+ diag($Installcheck::Run::stderr);
+ }
+
+}
+
+# clean up
+Installcheck::Run::cleanup();