--- /dev/null
+# Copyright (c) 2009, 2010 Zmanda, Inc. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License version 2 as published
+# by the Free Software Foundation.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+# or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+# for more details.
+#
+# You should have received a copy of the GNU General Public License along
+# with this program; if not, write to the Free Software Foundation, Inc.,
+# 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+#
+# Contact information: Zmanda Inc, 465 S. Mathilda Ave., Suite 300
+# Sunnyvale, CA 94086, USA, or: http://www.zmanda.com
+
+use Test::More tests => 46;
+use strict;
+use warnings;
+
+use lib "@amperldir@";
+use Installcheck::Config;
+use Installcheck::Run qw(run run_err run_get load_vtape vtape_dir);
+use Amanda::Device qw( :constants );
+use Amanda::Config qw( :init :getconf );
+use Amanda::Paths;
+use Amanda::Debug;
+use Amanda::Tapelist;
+
+my $testconf;
+
+Amanda::Debug::dbopen("installcheck");
+Installcheck::log_test_output();
+
+$testconf = Installcheck::Run::setup();
+$testconf->write();
+
+config_init($CONFIG_INIT_EXPLICIT_NAME, "TESTCONF");
+my ($cfgerr_level, @cfgerr_errors) = config_errors();
+if ($cfgerr_level >= $CFGERR_WARNINGS) {
+ config_print_errors();
+ BAIL_OUT("config errors");
+}
+
+# label slot 2 with "MyTape", slot 3 with "TESTCONF13", and add
+# the latter to the tapelist
+sub setup_vtapes {
+ my ($devdir, $dev);
+
+ $devdir = load_vtape(2);
+ $dev = Amanda::Device->new("file:$devdir");
+ ($dev && $dev->status == $DEVICE_STATUS_SUCCESS)
+ or BAIL_OUT("device error");
+
+ $dev->start($ACCESS_WRITE, "MyTape", undef)
+ or BAIL_OUT("device error");
+ $dev->finish()
+ or BAIL_OUT("device error");
+
+
+ $devdir = load_vtape(3);
+ $dev = Amanda::Device->new("file:$devdir");
+ ($dev && $dev->status == $DEVICE_STATUS_SUCCESS)
+ or BAIL_OUT("device error");
+
+ $dev->start($ACCESS_WRITE, "TESTCONF13", undef)
+ or BAIL_OUT("device error");
+ $dev->finish()
+ or BAIL_OUT("device error");
+
+ my $tlf = Amanda::Config::config_dir_relative(getconf($CNF_TAPELIST));
+ my $tl = Amanda::Tapelist->new($tlf, 1);
+ $tl->add_tapelabel("0", "TESTCONF13", "test tape");
+ $tl->write($tlf);
+}
+
+like(run_err('amtape'),
+ qr/^Usage:/,
+ "bare 'amtape' gives usage message");
+
+# in general, output goes to stderr, so we can't use run_get. These checks
+# accomplish two things: ensure that amtape can invoke the changer functions
+# correctly (and not generate an error), and ensure that it gives the
+# appropriate responses. It does not exercise the changer itself -- most
+# of these operations are meaningless for vtapes, anyway.
+
+setup_vtapes();
+
+ok(run('amtape', 'TESTCONF', 'reset'),
+ "'amtape TESTCONF reset'");
+like($Installcheck::Run::stderr,
+ qr/changer is reset/,
+ "..result correct");
+
+ok(run('amtape', 'TESTCONF', 'eject'),
+ "'amtape TESTCONF eject'");
+like($Installcheck::Run::stderr,
+ qr/drive ejected/,
+ "..result correct");
+
+# TODO: chg-disk doesn't support "clean"
+
+ok(run('amtape', 'TESTCONF', 'slot', '2'),
+ "'amtape TESTCONF slot 2'");
+like($Installcheck::Run::stderr,
+ qr/changed to slot 2/,
+ "..result correct");
+
+ok(run('amtape', 'TESTCONF', 'slot', 'current'),
+ "'amtape TESTCONF slot current'");
+like($Installcheck::Run::stderr,
+ qr/changed to slot 2/,
+ "..result correct");
+
+ok(run('amtape', 'TESTCONF', 'slot', 'next'),
+ "'amtape TESTCONF slot next'");
+like($Installcheck::Run::stderr,
+ qr/changed to slot 3/,
+ "..result correct");
+
+ok(run('amtape', 'TESTCONF', 'slot', 'next'),
+ "'amtape TESTCONF slot next'");
+like($Installcheck::Run::stderr,
+ qr/changed to slot 1/, # loop around to slot 1
+ "..result correct");
+
+ok(run('amtape', 'TESTCONF', 'label', 'MyTape'),
+ "'amtape TESTCONF label MyTape'");
+like($Installcheck::Run::stderr,
+ qr/slot +2:.*label MyTape/,
+ "..result correct");
+
+ok(run('amtape', 'TESTCONF', 'current'),
+ "'amtape TESTCONF current'");
+like($Installcheck::Run::stderr,
+ qr/slot +2:.*label MyTape/,
+ "..result correct");
+
+ok(run('amtape', 'TESTCONF', 'update'),
+ "'amtape TESTCONF update'");
+like($Installcheck::Run::stderr,
+ qr/update complete/,
+ "..result correct");
+
+ok(run('amtape', 'TESTCONF', 'show'),
+ "'amtape TESTCONF show'");
+like($Installcheck::Run::stderr,
+ qr/slot +2:.*label MyTape\nslot +3/,
+ "'amtape TESTCONF show' ..result correct");
+
+ok(run('amtape', 'TESTCONF', 'show', '2'),
+ "'amtape TESTCONF show'");
+like($Installcheck::Run::stderr,
+ qr/^slot +2:.*label MyTape$/,
+ "'amtape TESTCONF show 2' ..result correct");
+
+ok(run('amtape', 'TESTCONF', 'show', '1,3'),
+ "'amtape TESTCONF show'");
+like($Installcheck::Run::stderr,
+ qr/^slot +1: unlabeled volume\nslot +3: date \d{14} label TESTCONF13$/,
+# qr/slot +1: unlabeled volume\nslot +3: date 20111121133419 label TESTCONF13/,
+ "'amtape TESTCONF show 1,3' ..result correct");
+
+ok(run('amtape', 'TESTCONF', 'taper'),
+ "'amtape TESTCONF taper'");
+like($Installcheck::Run::stderr,
+ qr/Will write to volume 'TESTCONF13' in slot 3/,
+ "'amtape TESTCONF taper' ..result correct");
+
+###
+## shift to using the new Amanda::Changer::disk
+
+$testconf->remove_param("tapedev");
+$testconf->remove_param("tpchanger");
+$testconf->add_param("tpchanger", "\"chg-disk:" . vtape_dir(). "\"");
+$testconf->write();
+
+setup_vtapes();
+
+ok(run('amtape', 'TESTCONF', 'reset'),
+ "'amtape TESTCONF reset'");
+like($Installcheck::Run::stderr,
+ qr/changer is reset/,
+ "..result correct");
+
+ok(run('amtape', 'TESTCONF', 'slot', '2'),
+ "'amtape TESTCONF slot 2'");
+like($Installcheck::Run::stderr,
+ qr/changed to slot 2/,
+ "..result correct");
+
+ok(run('amtape', 'TESTCONF', 'slot', 'current'),
+ "'amtape TESTCONF slot current'");
+like($Installcheck::Run::stderr,
+ qr/changed to slot 2/,
+ "..result correct");
+
+ok(run('amtape', 'TESTCONF', 'slot', 'next'),
+ "'amtape TESTCONF slot next'");
+like($Installcheck::Run::stderr,
+ qr/changed to slot 3/,
+ "..result correct");
+
+ok(run('amtape', 'TESTCONF', 'label', 'MyTape'),
+ "'amtape TESTCONF label MyTape'");
+like($Installcheck::Run::stderr,
+ qr/label MyTape is now loaded from slot 2/,
+ "..result correct");
+
+ok(run('amtape', 'TESTCONF', 'current'),
+ "'amtape TESTCONF current'");
+like($Installcheck::Run::stderr,
+ qr/slot +2:.*label MyTape/,
+ "..result correct");
+
+like(run_err('amtape', 'TESTCONF', 'update'),
+ qr/does not support update/,
+ "'amtape TESTCONF update' fails gracefully");
+
+ok(run('amtape', 'TESTCONF', 'show'),
+ "'amtape TESTCONF show'");
+like($Installcheck::Run::stderr,
+ qr/slot +2:.*label MyTape\nslot +3/,
+ "..result correct");
+
+ok(run('amtape', 'TESTCONF', 'inventory'),
+ "'amtape TESTCONF inventory'");
+like($Installcheck::Run::stdout,
+ qr/slot +1: blank\nslot +2: label MyTape \(current\)\nslot +3/,
+ "..result correct");
+
+ok(run('amtape', 'TESTCONF', 'taper'),
+ "'amtape TESTCONF taper'");
+like($Installcheck::Run::stderr,
+ qr/Will write to volume 'TESTCONF13' in slot 3/,
+ "'amtape TESTCONF taper' ..result correct");
+
+Installcheck::Run::cleanup();