Imported Upstream version 3.1.0

[debian/amanda] / installcheck / amlabel.pl

diff --git a/installcheck/amlabel.pl b/installcheck/amlabel.pl
new file mode 100644 (file)
index 0000000..fd5be1d
--- /dev/null
+++ b/installcheck/amlabel.pl
@@ -0,0 +1,133 @@
+# Copyright (c) 2009, 2010 Zmanda, Inc.  All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License version 2 as published
+# by the Free Software Foundation.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+# or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
+# for more details.
+#
+# You should have received a copy of the GNU General Public License along
+# with this program; if not, write to the Free Software Foundation, Inc.,
+# 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+#
+# Contact information: Zmanda Inc, 465 S. Mathilda Ave., Suite 300
+# Sunnyvale, CA 94086, USA, or: http://www.zmanda.com
+
+use Test::More tests => 19;
+
+use lib "@amperldir@";
+use Installcheck::Config;
+use Installcheck::Run qw(run run_err run_get load_vtape vtape_dir);
+use Amanda::Device qw( :constants );
+use Amanda::Config qw( :init :getconf );
+use Amanda::Paths;
+use Amanda::Debug;
+use Amanda::Constants;
+use Amanda::Tapelist;
+
+my $testconf;
+
+Amanda::Debug::dbopen("installcheck");
+Installcheck::log_test_output();
+
+$testconf = Installcheck::Run::setup();
+$testconf->write();
+
+config_init($CONFIG_INIT_EXPLICIT_NAME, "TESTCONF");
+my ($cfgerr_level, @cfgerr_errors) = config_errors();
+if ($cfgerr_level >= $CFGERR_WARNINGS) {
+    config_print_errors();
+    BAIL_OUT("config errors");
+}
+
+# label slot 2 with "MyTape", slot 3 with "TESTCONF13", and add
+# the latter to the tapelist
+my ($devdir, $dev);
+
+$devdir = load_vtape(2);
+$dev = Amanda::Device->new("file:$devdir");
+($dev && $dev->status == $DEVICE_STATUS_SUCCESS)
+    or BAIL_OUT("device error");
+
+$dev->start($ACCESS_WRITE, "MyTape", undef)
+    or BAIL_OUT("device error");
+$dev->finish()
+    or BAIL_OUT("device error");
+
+my $tlf = Amanda::Config::config_dir_relative(getconf($CNF_TAPELIST));
+my $tl = Amanda::Tapelist::read_tapelist($tlf);
+$tl->add_tapelabel("0", "TESTCONF13", "test tape");
+$tl->write($tlf);
+
+like(run_err('amlabel'),
+    qr/^Usage:/,
+    "bare 'amlabel' gives usage message");
+
+like(run_get('amlabel', '--version'),
+    qr/^amlabel-\Q$Amanda::Constants::VERSION\E/,
+    "'amlabel --version' gives version");
+
+like(run_get('amlabel', 'TESTCONF', 'TESTCONF92'),
+    qr/Writing label 'TESTCONF92'/,
+    "amlabel labels the current slot by default");
+
+$tl = Amanda::Tapelist::read_tapelist($tlf);
+is_deeply($tl->[0], {
+       'reuse' => 1,
+       'comment' => undef,
+       'position' => 1,
+       'label' => 'TESTCONF92',
+       'datestamp' => '0'
+     },
+    "tapelist correctly updated");
+
+$devdir = load_vtape(1);
+$dev = Amanda::Device->new("file:$devdir");
+die "read_label failed" unless $dev->read_label() == $DEVICE_STATUS_SUCCESS;
+is($dev->volume_label, "TESTCONF92", "volume is actually labeled");
+
+ok(!run('amlabel', 'TESTCONF', 'TESTCONF93'),
+    "amlabel refuses to re-label a labeled volume");
+like($Installcheck::Run::stdout,
+    qr/Volume with label 'TESTCONF92' is active and contains data from this configuration/,
+    "with correct message");
+
+ok(!run('amlabel', 'TESTCONF', 'SomeTape'),
+    "amlabel refuses to write a non-matching label");
+like($Installcheck::Run::stderr,
+    qr/Label 'SomeTape' doesn't match labelstr '.*'/,
+    "with correct message on stderr");
+
+ok(!run('amlabel', '-f', 'TESTCONF', 'SomeTape'),
+    "amlabel will not write a non-matching label even with -f");
+
+ok(!run('amlabel', 'TESTCONF', 'TESTCONF13', 'slot', '3'),
+    "amlabel refuses to write a label already in the tapelist (and recognizes 'slot xx')");
+like($Installcheck::Run::stderr,
+    qr/Label 'TESTCONF13' already on a volume/,
+    "with correct message on stderr");
+
+ok(run('amlabel', '-f', 'TESTCONF', 'TESTCONF13', 'slot', '3'),
+    "amlabel will write a label already in the tapelist with -f");
+like($Installcheck::Run::stdout,
+    qr/Writing label 'TESTCONF13'/,
+    "with correct message on stdout");
+
+ok(!run('amlabel', 'TESTCONF', 'TESTCONF88', 'slot', '2'),
+    "amlabel refuses to overwrite a non-matching label");
+like($Installcheck::Run::stdout,
+    qr/Found label 'MyTape', but it is not from configuration 'TESTCONF'\./,
+    "with correct message on stdout");
+
+ok(run('amlabel', '-f', 'TESTCONF', 'TESTCONF88', 'slot', '2'),
+    "amlabel will overwrite a non-matching label with -f");
+like($Installcheck::Run::stdout,
+    qr/Found label 'MyTape', but it is not from configuration 'TESTCONF'\.
+Writing label 'TESTCONF88'/,
+    "with correct message on stdout");
+
+ok(run('amlabel', 'TESTCONF', 'TESTCONF88', '-f', 'slot', '2'),
+    "-f option doesn't have to follow 'amlabel'");