-# Note that this architecture assumes a full install -- not just server
-# or just client. Neither is sufficiently test-able on its own.
-
include $(top_srcdir)/config/automake/vars.am
include $(top_srcdir)/config/automake/scripts.am
-
-# Add your tests here.
+all_tests =
common_tests = \
+ Amanda_Archive \
Amanda_Config \
- Amanda_Types
+ Amanda_Config_FoldingHash \
+ Amanda_ClientService \
+ Amanda_Debug \
+ Amanda_Feature \
+ Amanda_IPC_Binary \
+ Amanda_IPC_LineProtocol \
+ Amanda_MainLoop \
+ Amanda_Header \
+ Amanda_Util \
+ Amanda_Xfer \
+ amarchiver \
+ gnutar
+all_tests += $(common_tests)
+
+client_tests = \
+ noop \
+ amgtar \
+ ampgsql \
+ amraw
+all_tests += $(client_tests)
server_tests = \
Amanda_Changer \
+ Amanda_Changer_compat \
+ Amanda_Changer_disk \
+ Amanda_Changer_multi \
+ Amanda_Changer_null \
+ Amanda_Changer_rait \
+ Amanda_Changer_robot \
+ Amanda_Changer_single \
Amanda_Cmdline \
+ Amanda_Curinfo \
+ Amanda_Disklist \
+ Amanda_DB_Catalog \
+ Amanda_Device \
+ Amanda_Holding \
Amanda_Logfile \
+ Amanda_Process \
+ Amanda_Recovery_Clerk \
+ Amanda_Recovery_Planner \
+ Amanda_Recovery_Scan \
+ Amanda_Report \
+ Amanda_Tapelist \
+ Amanda_Taper_Scan \
+ Amanda_Taper_Scan_lexical \
+ Amanda_Taper_Scan_oldest \
+ Amanda_Taper_Scan_traditional \
+ Amanda_Taper_Scribe \
+ bigint \
+ taper \
+ amcheck-device \
+ amgetconf \
+ amtape \
+ amlabel \
+ amtapetype \
+ chunker
+all_tests += $(server_tests)
+
+full_tests = \
+ =setupcache \
+ amadmin \
+ amcheck \
amcheckdump \
amdevcheck \
- amgetconf
+ amdump \
+ amdump_client \
+ amflush \
+ amoverview \
+ amreport \
+ amrmtape \
+ amserverconfig \
+ amservice \
+ amstatus \
+ amvault \
+ example \
+ pp-scripts
+all_tests += $(full_tests)
+
+restore_tests = \
+ amfetchdump \
+ amidxtaped \
+ amrestore
+all_tests += $(restore_tests)
+
+restore_tests_no_check_userid = \
+ amrecover
+all_tests += $(restore_tests_no_check_userid)
+
+ndmp_tests = \
+ Amanda_Changer_ndmp \
+ Amanda_NDMP
+all_tests += $(ndmp_tests)
+
+mock_tests = \
+ mock_mtx
+all_tests += $(mock_tests)
-tests = $(common_tests)
+# mock scripts
+mocks = \
+ mock/mail \
+ mock/mtx \
+ mock/lpr
+
+# data for test scripts
+test_data = \
+ data/aws-bundle.crt
+EXTRA_DIST += $(test_data)
+
+tests =
+
+# tests requiring neither client nor server
+tests += $(common_tests)
+tests += $(mock_tests)
+
+# tests requiring server
if WANT_SERVER
tests += $(server_tests)
endif
-# Add any common files (that should not be run as tests) here:
-test_utils = Amconfig.pm
+# tests requiring client
+if WANT_CLIENT
+tests += $(client_tests)
+endif
-SCRIPTS_PERL = $(common_tests) $(server_tests) $(test_utils)
+# tests requiring a client and a server AND restore facilities (any tests that run amdump)
+if WANT_SERVER
+if WANT_CLIENT
+# tests requiring a client and a server (any tests that run amdump)
+tests += $(full_tests)
-# we don't need to syntax check the test scripts..
-CHECK_PERL =
+# tests requiring a client, a server, *and* restore code
+if WANT_RESTORE
+tests += $(restore_tests)
+
+# and tests requiring all that *and* requiring CHECK_USERID is not set
+if !CHECK_USERID
+tests += $(restore_tests_no_check_userid)
+endif
+endif
+endif
+endif
+
+# tests that need a server with NDMP support
+if WANT_NDMP
+if WANT_SERVER
+tests += $(ndmp_tests)
+endif
+endif
+
+# Add any common files (that should not be run as tests, and that do not
+# require configure-variable substitution) here:
+test_utils = \
+ Installcheck.pm \
+ Installcheck/Catalogs.pm \
+ Installcheck/Config.pm \
+ Installcheck/ClientService.pm \
+ Installcheck/Mock.pm \
+ Installcheck/Run.pm \
+ Installcheck/Dumpcache.pm \
+ Installcheck/Application.pm \
+ Installcheck/Changer.pm
+EXTRA_DIST += $(test_utils)
+
+# the catalogs themselves
+catalogs = \
+ catalogs/amflush.cat \
+ catalogs/bigdb.cat \
+ catalogs/bigestimate.cat \
+ catalogs/chunker-partial.cat \
+ catalogs/doublefailure.cat \
+ catalogs/fatal.cat \
+ catalogs/filesystemstaped.cat \
+ catalogs/flush-noorigsize.cat \
+ catalogs/flush-origsize.cat \
+ catalogs/longstrange.cat \
+ catalogs/multi-taper.cat \
+ catalogs/normal.cat \
+ catalogs/plannerfail.cat \
+ catalogs/quoted.cat \
+ catalogs/resultsmissing.cat \
+ catalogs/retried.cat \
+ catalogs/retried-nofinish.cat \
+ catalogs/retried-strange.cat \
+ catalogs/shortstrange.cat \
+ catalogs/skipped.cat \
+ catalogs/spanned.cat \
+ catalogs/strontium.cat \
+ catalogs/taperr.cat
+EXTRA_DIST += $(catalogs)
+
+
+# and finally some development utilities
+noinst_SCRIPTS = \
+ run-ndmp
+
+CHECK_PERL_FLAGS=-I$(top_srcdir)/installcheck
+
+SCRIPTS_PERL = $(tests) $(mocks) $(noinst_SCRIPTS)
+SCRIPTS_EXTRA_DIST = $(all_tests)
+
+# skip syntax checks on these files, since we're about to run all of them
+SKIP_CHECKS = yes
.PHONY: clobber_my_config_is_ok
clobber_my_config_is_ok:
- @if test "$(CLOBBER_MY_CONFIG)" != "OK"; then \
+ @if test "$(CONFIG_CLOBBER_MY_CONFIG)" != "OK" -a \
+ "$(CLOBBER_MY_CONFIG)" != "OK"; then \
echo ""; \
echo "'make installcheck' is a dangerous tool. It will overwrite your"; \
- echo "amanda-client.conf and amandates, and (if it"; \
- echo "triggers an as-yet undetected bug) may do other unexpected things. You are"; \
- echo "strongly encouraged"; \
+ echo "amanda-client.conf and amandates, and (if it triggers an as-yet undetected"; \
+ echo "bug) may do other unexpected things. You are strongly encouraged"; \
echo " - not to run installchecks on a production install"; \
echo " - not to run installchecks as root"; \
echo "See http://wiki.zmanda.com/index.php/Testing for instructions on setting up a"; \
- echo "test environment in which"; \
- echo "potential damage is limited by your filesystem's permissions. To actually run"; \
- echo "the installchecks, invoke make"; \
- echo "as follows:"; \
+ echo "test environment in which potential damage is limited by your filesystem's"; \
+ echo "permissions. To actually run the installchecks, invoke make as follows:"; \
echo " $(MAKE) CLOBBER_MY_CONFIG=OK installcheck"; \
exit 1; \
fi
+# newer Test::Harness (v3.18-3.21) implementations get confused by executable
+# test scripts, so this rule chmod a-x's them first
installcheck-local: clobber_my_config_is_ok $(SCRIPTS_PERL)
- $(mkdir_p) $(AMANDA_TMPDIR)
- $(PERL) -I$(srcdir) -I$(builddir) -e 'use Test::Harness qw(&runtests); runtests(@ARGV);' $(tests)
+ rm -rf "$(AMANDA_TMPDIR)/installchecks"
+ $(mkdir_p) "$(AMANDA_TMPDIR)/installchecks"
+ @if test -f "$(CONFIG_DIR)/amanda-client.conf" -a ! -f "$(CONFIG_DIR)/amanda-client.conf.install-backup"; then \
+ cp "$(CONFIG_DIR)/amanda-client.conf" "$(CONFIG_DIR)/amanda-client.conf.install-backup"; \
+ fi
+ for f in $(tests); do chmod a-x $$f; done
+ srcdir="$(srcdir)" $(PERL) -I$(srcdir) -I. -e 'use Test::Harness qw(&runtests); runtests(sort @ARGV);' $(tests)
rm -rf "$(CONFIG_DIR)/TESTCONF"
- rm -rf "$(CONFIG_DIR)/amanda-client.conf"
- rm -rf "$(DEFAULT_AMANDATES_FILE)"
- rm -rf "$(GNUTAR_LISTED_INCREMENTAL_DIR)"
+ @if test -f "$(CONFIG_DIR)/amanda-client.conf.install-backup"; then \
+ mv -f "$(CONFIG_DIR)/amanda-client.conf.install-backup" "$(CONFIG_DIR)/amanda-client.conf"; \
+ fi
+ rm -rf "$(AMANDA_TMPDIR)/installchecks"