--- /dev/null
+# Copyright (c) 2009, 2010 Zmanda Inc. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or modify it
+# under the terms of the GNU General Public License version 2 as published
+# by the Free Software Foundation.
+#
+# This program is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+# or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+# for more details.
+#
+# You should have received a copy of the GNU General Public License along
+# with this program; if not, write to the Free Software Foundation, Inc.,
+# 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+#
+# Contact information: Zmanda Inc, 465 S. Mathilda Ave., Suite 300
+# Sunnyvale, CA 94086, USA, or: http://www.zmanda.com
+
+use Test::More tests => 321;
+use File::Path;
+use Data::Dumper;
+use strict;
+
+use lib "@amperldir@";
+use Installcheck;
+use Installcheck::Config;
+use Installcheck::Changer;
+use Installcheck::Mock qw( setup_mock_mtx $mock_mtx_path );
+use Amanda::Device qw( :constants );
+use Amanda::Debug;
+use Amanda::Paths;
+use Amanda::MainLoop;
+use Amanda::Config qw( :init :getconf config_dir_relative );
+use Amanda::Changer;
+
+# set up debugging so debug output doesn't interfere with test results
+Amanda::Debug::dbopen("installcheck");
+
+# and disable Debug's die() and warn() overrides
+Amanda::Debug::disable_die_override();
+Installcheck::log_test_output();
+
+my $chg_state_file = "$Installcheck::TMP/chg-robot-state";
+unlink($chg_state_file) if -f $chg_state_file;
+
+my $mtx_state_file = setup_mock_mtx (
+ num_slots => 5,
+ num_ie => 1,
+ barcodes => 1,
+ track_orig => 1,
+ num_drives => 2,
+ loaded_slots => {
+ 1 => '11111',
+ 2 => '22222',
+ 3 => '33333',
+ 4 => '44444',
+ # slot 5 is empty
+ },
+ first_slot => 1,
+ first_drive => 0,
+ first_ie => 6,
+ );
+
+sub check_inventory {
+ my ($chg, $barcodes, $next_step, $expected, $msg) = @_;
+
+ $chg->inventory(inventory_cb => make_cb(sub {
+ my ($err, $inv) = @_;
+ die $err if $err;
+
+ # strip barcodes from both $expected and $inv
+ if (!$barcodes) {
+ for (@$expected, @$inv) {
+ delete $_->{'barcode'};
+ }
+ }
+
+ is_deeply($inv, $expected, $msg)
+ or diag("Got:\n" . Dumper($inv));
+
+ $next_step->();
+ }));
+}
+
+##
+# test the "interface" package
+
+sub test_interface {
+ my ($finished_cb) = @_;
+ my ($interface, $chg);
+
+ my $steps = define_steps
+ cb_ref => \$finished_cb;
+
+ step start => sub {
+ my $testconf = Installcheck::Config->new();
+ $testconf->add_changer('robo', [
+ tpchanger => "\"chg-robot:$mtx_state_file\"",
+ changerfile => "\"$chg_state_file\"",
+
+ # point to the two vtape "drives" that mock/mtx will set up
+ property => "\"tape-device\" \"0=null:drive0\"",
+
+ # an point to the mock mtx
+ property => "\"mtx\" \"$mock_mtx_path\"",
+ ]);
+ $testconf->write();
+
+ my $cfg_result = config_init($CONFIG_INIT_EXPLICIT_NAME, 'TESTCONF');
+ if ($cfg_result != $CFGERR_OK) {
+ my ($level, @errors) = Amanda::Config::config_errors();
+ die(join "\n", @errors);
+ }
+
+ $chg = Amanda::Changer->new("robo");
+ die "$chg" if $chg->isa("Amanda::Changer::Error");
+ $interface = $chg->{'interface'};
+
+ $interface->inquiry($steps->{'inquiry_cb'});
+ };
+
+ step inquiry_cb => sub {
+ my ($error, $info) = @_;
+
+ die $error if $error;
+
+ is_deeply($info, {
+ 'revision' => '0416',
+ 'product id' => 'SSL2000 Series',
+ 'attached changer' => 'No',
+ 'vendor id' => 'COMPAQ',
+ 'product type' => 'Medium Changer'
+ }, "robot::Interface inquiry() info is correct");
+
+ $steps->{'status1'}->();
+ };
+
+ step status1 => sub {
+ $interface->status(sub {
+ my ($error, $status) = @_;
+
+ die $error if $error;
+
+ is_deeply($status, {
+ drives => {
+ 0 => undef,
+ 1 => undef,
+ },
+ slots => {
+ 1 => { 'barcode' => '11111', ie => 0 },
+ 2 => { 'barcode' => '22222', ie => 0 },
+ 3 => { 'barcode' => '33333', ie => 0 },
+ 4 => { 'barcode' => '44444', ie => 0 },
+ 5 => { empty => 1, ie => 0 },
+ 6 => { empty => 1, ie => 1 },
+ },
+ }, "robot::Interface status() output is correct (no drives loaded)");
+ $steps->{'load0'}->();
+ });
+ };
+
+ step load0 => sub {
+ $interface->load(2, 0, sub {
+ my ($error) = @_;
+
+ die $error if $error;
+
+ pass("load");
+ $steps->{'status2'}->();
+ });
+ };
+
+ step status2 => sub {
+ $interface->status(sub {
+ my ($error, $status) = @_;
+
+ die $error if $error;
+
+ is_deeply($status, {
+ drives => {
+ 0 => { barcode => '22222', 'orig_slot' => 2 },
+ 1 => undef,
+ },
+ slots => {
+ 1 => { 'barcode' => '11111', ie => 0 },
+ 2 => { empty => 1, ie => 0 },
+ 3 => { 'barcode' => '33333', ie => 0 },
+ 4 => { 'barcode' => '44444', ie => 0 },
+ 5 => { empty => 1, ie => 0 },
+ 6 => { empty => 1, ie => 1 },
+ },
+ }, "robot::Interface status() output is correct (one drive loaded)");
+
+ $steps->{'load1'}->();
+ });
+ };
+
+ step load1 => sub {
+ $interface->load(4, 1, sub {
+ my ($error) = @_;
+
+ die $error if $error;
+
+ pass("load");
+ $steps->{'status3'}->();
+ });
+ };
+
+ step status3 => sub {
+ $interface->status(sub {
+ my ($error, $status) = @_;
+
+ die $error if $error;
+
+ is_deeply($status, {
+ drives => {
+ 0 => { barcode => '22222', 'orig_slot' => 2 },
+ 1 => { barcode => '44444', 'orig_slot' => 4 },
+ },
+ slots => {
+ 1 => { 'barcode' => '11111', ie => 0 },
+ 2 => { empty => 1, ie => 0 },
+ 3 => { 'barcode' => '33333', ie => 0 },
+ 4 => { empty => 1, ie => 0 },
+ 5 => { empty => 1, ie => 0 },
+ 6 => { empty => 1, ie => 1 },
+ },
+ }, "robot::Interface status() output is correct (two drives loaded)");
+
+ $steps->{'transfer'}->();
+ });
+ };
+
+ step transfer => sub {
+ $interface->transfer(3, 6, sub {
+ my ($error) = @_;
+
+ die $error if $error;
+
+ pass("transfer");
+ $steps->{'status4'}->();
+ });
+ };
+
+ step status4 => sub {
+ $interface->status(sub {
+ my ($error, $status) = @_;
+
+ die $error if $error;
+
+ is_deeply($status, {
+ drives => {
+ 0 => { barcode => '22222', 'orig_slot' => 2 },
+ 1 => { barcode => '44444', 'orig_slot' => 4 },
+ },
+ slots => {
+ 1 => { 'barcode' => '11111', ie => 0 },
+ 2 => { empty => 1, ie => 0 },
+ 3 => { empty => 1, ie => 0 },
+ 4 => { empty => 1, ie => 0 },
+ 5 => { empty => 1, ie => 0 },
+ 6 => { 'barcode' => '33333', ie => 1 },
+ },
+ }, "robot::Interface status() output is correct after transfer");
+
+ $finished_cb->();
+ });
+ };
+}
+test_interface(\&Amanda::MainLoop::quit);
+Amanda::MainLoop::run();
+
+{
+ my $testconf = Installcheck::Config->new();
+ $testconf->add_changer('bum-scsi-dev', [
+ tpchanger => "\"chg-robot:does/not/exist\"",
+ property => "\"tape-device\" \"0=null:foo\"",
+ changerfile => "\"$chg_state_file\"",
+ ]);
+ $testconf->add_changer('no-tape-device', [
+ tpchanger => "\"chg-robot:$mtx_state_file\"",
+ changerfile => "\"$chg_state_file\"",
+ ]);
+ $testconf->add_changer('bad-property', [
+ tpchanger => "\"chg-robot:$mtx_state_file\"",
+ changerfile => "\"$chg_state_file\"",
+ property => "\"fast-search\" \"maybe\"",
+ property => "\"tape-device\" \"0=null:foo\"",
+ ]);
+ $testconf->add_changer('no-fast-search', [
+ tpchanger => "\"chg-robot:$mtx_state_file\"",
+ changerfile => "\"$chg_state_file\"",
+ property => "\"use-slots\" \"1-3,9\"",
+ property => "append \"use-slots\" \"8,5-6\"",
+ property => "\"fast-search\" \"no\"",
+ property => "\"tape-device\" \"0=null:foo\"",
+ ]);
+ $testconf->add_changer('delays', [
+ tpchanger => "\"chg-robot:$mtx_state_file\"",
+ # no changerfile property
+ property => "\"tape-device\" \"0=null:foo\"",
+ property => "\"status-interval\" \"1m\"",
+ property => "\"eject-delay\" \"1s\"",
+ property => "\"unload-delay\" \"2M\"",
+ property => "\"load-poll\" \"2s POLl 3s uNtil 1m\"",
+ ]);
+ $testconf->write();
+
+ config_uninit();
+ my $cfg_result = config_init($CONFIG_INIT_EXPLICIT_NAME, 'TESTCONF');
+ if ($cfg_result != $CFGERR_OK) {
+ my ($level, @errors) = Amanda::Config::config_errors();
+ die(join "\n", @errors);
+ }
+
+ # test the changer constructor and properties
+ my $err = Amanda::Changer->new("bum-scsi-dev");
+ chg_err_like($err,
+ { message => "'does/not/exist' not found",
+ type => 'fatal' },
+ "check for device existence works");
+
+ $err = Amanda::Changer->new("no-tape-device");
+ chg_err_like($err,
+ { message => "no 'tape-device' property specified",
+ type => 'fatal' },
+ "tape-device property is required");
+
+ $err = Amanda::Changer->new("bad-property");
+ chg_err_like($err,
+ { message => "invalid 'fast-search' value",
+ type => 'fatal' },
+ "invalid boolean value handled correctly");
+
+ my $chg = Amanda::Changer->new("delays");
+ die "$chg" if $chg->isa("Amanda::Changer::Error");
+ is($chg->{'status_interval'}, 60, "status-interval parsed");
+ is($chg->{'eject_delay'}, 1, "eject-delay parsed");
+ is($chg->{'unload_delay'}, 120, "unload-delay parsed");
+ is_deeply($chg->{'load_poll'}, [ 2, 3, 60 ], "load-poll parsed");
+
+ # check out the statefile filename generation
+ my $dashed_mtx_state_file = $mtx_state_file;
+ $dashed_mtx_state_file =~ tr/a-zA-Z0-9/-/cs;
+ $dashed_mtx_state_file =~ s/^-*//;
+ is($chg->{'statefile'}, "$localstatedir/amanda/chg-robot-$dashed_mtx_state_file",
+ "statefile calculated correctly");
+
+ # test no-fast-search
+ $chg = Amanda::Changer->new("no-fast-search");
+ die "$chg" if $chg->isa("Amanda::Changer::Error");
+ $chg->info(
+ info => ['fast_search'],
+ info_cb => make_cb(info_cb => sub {
+ my ($err, %info) = @_;
+ ok(!$info{'fast_search'}, "fast-search property works");
+ Amanda::MainLoop::quit();
+ }));
+ Amanda::MainLoop::run();
+
+ # test use-slots
+ my @allowed = map { $chg->_is_slot_allowed($_) } (0 .. 10);
+ is_deeply([ @allowed ], [ 0, 1, 1, 1, 0, 1, 1, 0, 1, 1, 0 ],
+ "_is_slot_allowed parses multiple properties and behaves as expected");
+}
+
+##
+# Test the real deal
+
+sub test_changer {
+ my ($mtx_config, $finished_cb) = @_;
+ my $chg;
+ my ($res1, $res2, $mtx_state_file);
+ my $pfx = "BC=$mtx_config->{barcodes}; TORIG=$mtx_config->{track_orig}";
+ my $vtape_root = "$Installcheck::TMP/chg-robot-vtapes";
+
+ my $steps = define_steps
+ cb_ref => \$finished_cb;
+
+ step setup => sub {
+ # clean up
+ unlink($chg_state_file) if -f $chg_state_file;
+ %Amanda::Changer::changers_by_uri_cc = ();
+
+ # set up some vtapes
+ rmtree($vtape_root);
+ mkpath($vtape_root);
+
+ # reset the mock mtx
+ $mtx_state_file = setup_mock_mtx (
+ %$mtx_config,
+ num_slots => 6,
+ num_ie => 1,
+ num_drives => 2,
+ loaded_slots => {
+ 1 => '11111',
+ 2 => '22222',
+ 3 => '33333',
+ 4 => '44444',
+ # slot 5 is empty
+ 6 => '66666', # slot 6 is full, but not in use-slots
+ },
+ first_slot => 1,
+ first_drive => 0,
+ first_ie => 6,
+ vtape_root => $vtape_root,
+ );
+
+ my @ignore_barcodes = ( property => "\"ignore-barcodes\" \"y\"")
+ if ($mtx_config->{'barcodes'} == -1);
+
+ my $testconf = Installcheck::Config->new();
+ $testconf->add_changer('robo', [
+ tpchanger => "\"chg-robot:$mtx_state_file\"",
+ changerfile => "\"$chg_state_file\"",
+
+ # point to the two vtape "drives" that mock/mtx will set up
+ property => "\"tape-device\" \"0=file:$vtape_root/drive0\"",
+ property => "append \"tape-device\" \"1=file:$vtape_root/drive1\"",
+ property => "\"use-slots\" \"1-5\"",
+ property => "\"mtx\" \"$mock_mtx_path\"",
+ @ignore_barcodes,
+ ]);
+ $testconf->write();
+
+ config_uninit();
+ my $cfg_result = config_init($CONFIG_INIT_EXPLICIT_NAME, 'TESTCONF');
+ if ($cfg_result != $CFGERR_OK) {
+ my ($level, @errors) = Amanda::Config::config_errors();
+ die(join "\n", @errors);
+ }
+
+ $steps->{'start'}->();
+ };
+
+ step start => sub {
+ $chg = Amanda::Changer->new("robo");
+ ok(!$chg->isa("Amanda::Changer::Error"),
+ "$pfx: Create working chg-robot instance")
+ or die("no sense going on: $chg");
+
+ $chg->info(info => [qw(vendor_string num_slots fast_search)], info_cb => $steps->{'info_cb'});
+ };
+
+ step info_cb => sub {
+ my ($err, %info) = @_;
+ die $err if $err;
+
+ is_deeply({ %info }, {
+ num_slots => 5,
+ fast_search => 1,
+ vendor_string => "COMPAQ SSL2000 Series",
+ }, "$pfx: info keys num_slots, fast_search, vendor_string are correct");
+
+ $steps->{'inventory1'}->();
+ };
+
+ step inventory1 => sub {
+ check_inventory($chg, $mtx_config->{'barcodes'} > 0, $steps->{'load_slot_1'}, [
+ { slot => 1, state => Amanda::Changer::SLOT_FULL,
+ barcode => '11111', current => 1,
+ device_status => undef, f_type => undef, label => undef },
+ { slot => 2, state => Amanda::Changer::SLOT_FULL,
+ barcode => '22222',
+ device_status => undef, f_type => undef, label => undef },
+ { slot => 3, state => Amanda::Changer::SLOT_FULL,
+ barcode => '33333',
+ device_status => undef, f_type => undef, label => undef },
+ { slot => 4, state => Amanda::Changer::SLOT_FULL,
+ barcode => '44444',
+ device_status => undef, f_type => undef, label => undef },
+ { slot => 5, state => Amanda::Changer::SLOT_EMPTY,
+ device_status => undef, f_type => undef, label => undef },
+ ], "$pfx: inventory is correct on start-up");
+ };
+
+ step load_slot_1 => sub {
+ $chg->load(slot => 1, res_cb => $steps->{'loaded_slot_1'});
+ };
+
+ step loaded_slot_1 => sub {
+ (my $err, $res1) = @_;
+ die $err if $err;
+
+ is($res1->{'device'}->device_name, "file:$vtape_root/drive0",
+ "$pfx: first load returns drive-0 device");
+
+ is_deeply({
+ loaded_in => $chg->{'__last_state'}->{'slots'}->{1}->{'loaded_in'},
+ orig_slot => $chg->{'__last_state'}->{'drives'}->{0}->{'orig_slot'},
+ }, {
+ loaded_in => 0,
+ orig_slot => 1,
+ }, "$pfx: slot 1 'loaded_in' and drive 0 'orig_slot' are correct");
+
+ $steps->{'load_slot_2'}->();
+ };
+
+ step load_slot_2 => sub {
+ $chg->load(slot => 2, res_cb => $steps->{'loaded_slot_2'});
+ };
+
+ step loaded_slot_2 => sub {
+ (my $err, $res2) = @_;
+ die $err if $err;
+
+ is($res2->{'device'}->device_name, "file:$vtape_root/drive1",
+ "$pfx: second load returns drive-1 device");
+
+ is_deeply({
+ loaded_in => $chg->{'__last_state'}->{'slots'}->{1}->{'loaded_in'},
+ orig_slot => $chg->{'__last_state'}->{'drives'}->{0}->{'orig_slot'},
+ }, {
+ loaded_in => 0,
+ orig_slot => 1,
+ }, "$pfx: slot 1 'loaded_in' and drive 0 'orig_slot' are still correct");
+
+ is_deeply({
+ loaded_in => $chg->{'__last_state'}->{'slots'}->{2}->{'loaded_in'},
+ orig_slot => $chg->{'__last_state'}->{'drives'}->{1}->{'orig_slot'},
+ }, {
+ loaded_in => 1,
+ orig_slot => 2,
+ }, "$pfx: slot 2 'loaded_in' and drive 1 'orig_slot' are correct");
+
+ $steps->{'check_loads'}->();
+ };
+
+ step check_loads => sub {
+ # peek into the interface to check that things are loaded correctly
+ $chg->{'interface'}->status(sub {
+ my ($error, $status) = @_;
+
+ die $error if $error;
+
+ # only perform these checks when barcodes are enabled
+ if ($mtx_config->{'barcodes'} > 0) {
+ is_deeply($status->{'drives'}, {
+ 0 => { barcode => '11111', 'orig_slot' => 1 },
+ 1 => { barcode => '22222', 'orig_slot' => 2 },
+ }, "$pfx: double-check: loading drives with the changer gets the right drives loaded");
+ }
+
+ $steps->{'inventory2'}->();
+ });
+ };
+
+ step inventory2 => sub {
+ check_inventory($chg, $mtx_config->{'barcodes'} > 0, $steps->{'load_slot_3'}, [
+ { slot => 1, state => Amanda::Changer::SLOT_FULL,
+ barcode => '11111', reserved => 1, loaded_in => 0, current => 1,
+ device_status => undef, f_type => undef, label => undef },
+ { slot => 2, state => Amanda::Changer::SLOT_FULL,
+ barcode => '22222', reserved => 1, loaded_in => 1,
+ device_status => undef, f_type => undef, label => undef },
+ { slot => 3, state => Amanda::Changer::SLOT_FULL,
+ barcode => '33333',
+ device_status => undef, f_type => undef, label => undef },
+ { slot => 4, state => Amanda::Changer::SLOT_FULL,
+ barcode => '44444',
+ device_status => undef, f_type => undef, label => undef },
+ { slot => 5, state => Amanda::Changer::SLOT_EMPTY,
+ device_status => undef, f_type => undef, label => undef },
+ ], "$pfx: inventory is updated when slots are loaded");
+ };
+
+ step load_slot_3 => sub {
+ $chg->load(slot => 3, res_cb => $steps->{'loaded_slot_3'});
+ };
+
+ step loaded_slot_3 => sub {
+ my ($err, $no_res) = @_;
+
+ chg_err_like($err,
+ { message => "no drives available",
+ reason => 'driveinuse',
+ type => 'failed' },
+ "$pfx: trying to load a third slot fails with 'no drives available'");
+
+ $steps->{'label_tape_1'}->();
+ };
+
+ step label_tape_1 => sub {
+ $res1->{'device'}->start($Amanda::Device::ACCESS_WRITE, "TAPE-1", undef);
+ $res1->{'device'}->finish();
+
+ $res1->set_label(label => "TAPE-1", finished_cb => $steps->{'label_tape_2'});
+ };
+
+ step label_tape_2 => sub {
+ my ($err) = @_;
+ die $err if $err;
+
+ pass("$pfx: labeled TAPE-1 in drive 0");
+
+ is_deeply({
+ loaded_in => $chg->{'__last_state'}->{'slots'}->{1}->{'loaded_in'},
+ orig_slot => $chg->{'__last_state'}->{'drives'}->{0}->{'orig_slot'},
+ slot_label => $chg->{'__last_state'}->{'slots'}->{1}->{'label'},
+ drive_label => $chg->{'__last_state'}->{'drives'}->{0}->{'label'},
+ }, {
+ loaded_in => 0,
+ orig_slot => 1,
+ slot_label => 'TAPE-1',
+ drive_label => 'TAPE-1',
+ }, "$pfx: label is correctly reflected in changer state");
+
+ is_deeply({
+ slot_2_loaded_in => $chg->{'__last_state'}->{'slots'}->{2}->{'loaded_in'},
+ slot_1_loaded_in => $chg->{'__last_state'}->{'drives'}->{1}->{'orig_slot'},
+ }, {
+ slot_2_loaded_in => 1,
+ slot_1_loaded_in => 2,
+ },
+ "$pfx: slot 2 'loaded_in' and drive 1 'orig_slot' are correct");
+
+ $res2->{'device'}->start($Amanda::Device::ACCESS_WRITE, "TAPE-2", undef);
+ $res2->{'device'}->finish();
+
+ $res2->set_label(label => "TAPE-2", finished_cb => $steps->{'release1'});
+ };
+
+ step release1 => sub {
+ my ($err) = @_;
+ die $err if $err;
+
+ pass("$pfx: labeled TAPE-2 in drive 1");
+
+ is_deeply({
+ loaded_in => $chg->{'__last_state'}->{'slots'}->{2}->{'loaded_in'},
+ orig_slot => $chg->{'__last_state'}->{'drives'}->{1}->{'orig_slot'},
+ slot_label => $chg->{'__last_state'}->{'slots'}->{2}->{'label'},
+ drive_label => $chg->{'__last_state'}->{'drives'}->{1}->{'label'},
+ }, {
+ loaded_in => 1,
+ orig_slot => 2,
+ slot_label => 'TAPE-2',
+ drive_label => 'TAPE-2',
+ }, "$pfx: label is correctly reflected in changer state");
+
+ $res2->release(finished_cb => $steps->{'inventory3'});
+ };
+
+ step inventory3 => sub {
+ my ($err) = @_;
+ die "$err" if $err;
+ pass("$pfx: slot 2/drive 1 released");
+
+ check_inventory($chg, $mtx_config->{'barcodes'} > 0, $steps->{'check_state_after_release1'}, [
+ { slot => 1, state => Amanda::Changer::SLOT_FULL,
+ barcode => '11111', reserved => 1, loaded_in => 0, current => 1,
+ device_status => $DEVICE_STATUS_SUCCESS,
+ f_type => $Amanda::Header::F_TAPESTART, label => 'TAPE-1' },
+ { slot => 2, state => Amanda::Changer::SLOT_FULL,
+ barcode => '22222', loaded_in => 1,
+ device_status => $DEVICE_STATUS_SUCCESS,
+ f_type => $Amanda::Header::F_TAPESTART, label => 'TAPE-2' },
+ { slot => 3, state => Amanda::Changer::SLOT_FULL,
+ barcode => '33333',
+ device_status => undef, f_type => undef, label => undef },
+ { slot => 4, state => Amanda::Changer::SLOT_FULL,
+ barcode => '44444',
+ device_status => undef, f_type => undef, label => undef },
+ { slot => 5, state => Amanda::Changer::SLOT_EMPTY,
+ device_status => undef, f_type => undef, label => undef },
+ ], "$pfx: inventory is still up to date");
+ };
+
+ step check_state_after_release1 => sub {
+ is($chg->{'__last_state'}->{'drives'}->{1}->{'res_info'}, undef,
+ "$pfx: drive is not reserved");
+ is($chg->{'__last_state'}->{'drives'}->{1}->{'label'}, 'TAPE-2',
+ "$pfx: tape is still in drive");
+
+ $steps->{'load_current_1'}->();
+ };
+
+ step load_current_1 => sub {
+ $chg->load(relative_slot => "current", res_cb => $steps->{'loaded_current_1'});
+ };
+
+ step loaded_current_1 => sub {
+ my ($err, $res) = @_;
+
+ chg_err_like($err,
+ { message => "the requested volume is in use (drive 0)",
+ reason => 'volinuse',
+ type => 'failed' },
+ "$pfx: loading 'current' when set_current hasn't been used yet gets slot 1 (which is in use)");
+
+ $steps->{'load_slot_4'}->();
+ };
+
+ # this should unload what's in drive 1 and load the empty volume in slot 4
+ step load_slot_4 => sub {
+ $chg->load(slot => 4, set_current => 1, res_cb => $steps->{'loaded_slot_4'});
+ };
+
+ step loaded_slot_4 => sub {
+ (my $err, $res2) = @_;
+ die "$err" if $err;
+
+ is($res2->{'device'}->device_name, "file:$vtape_root/drive1",
+ "$pfx: loaded slot 4 into drive 1 (and set current to slot 4)");
+
+ is_deeply({
+ loaded_in => $chg->{'__last_state'}->{'slots'}->{2}->{'loaded_in'},
+ slot_label => $chg->{'__last_state'}->{'slots'}->{2}->{'label'},
+ }, {
+ loaded_in => undef,
+ slot_label => 'TAPE-2',
+ }, "$pfx: slot 2 (which was just unloaded) still tracked correctly");
+
+ is_deeply({
+ loaded_in => $chg->{'__last_state'}->{'slots'}->{1}->{'loaded_in'},
+ orig_slot => $chg->{'__last_state'}->{'drives'}->{0}->{'orig_slot'},
+ }, {
+ loaded_in => 0,
+ orig_slot => 1,
+ }, "$pfx: slot 1 'loaded_in' and drive 0 'orig_slot' are *still* correct");
+
+ is_deeply({
+ loaded_in => $chg->{'__last_state'}->{'slots'}->{4}->{'loaded_in'},
+ orig_slot => $chg->{'__last_state'}->{'drives'}->{1}->{'orig_slot'},
+ }, {
+ loaded_in => 1,
+ orig_slot => 4,
+ }, "$pfx: slot 4 'loaded_in' and drive 1 'orig_slot' are correct");
+
+ $steps->{'label_tape_4'}->();
+ };
+
+ step label_tape_4 => sub {
+ $res2->{'device'}->start($Amanda::Device::ACCESS_WRITE, "TAPE-4", undef);
+ $res2->{'device'}->finish();
+
+ $res2->set_label(label => "TAPE-4", finished_cb => $steps->{'inventory4'});
+ };
+
+ step inventory4 => sub {
+ my ($err) = @_;
+ die "$err" if $err;
+ pass("$pfx: labeled TAPE-4 in drive 1");
+
+ check_inventory($chg, $mtx_config->{'barcodes'} > 0, $steps->{'release2'}, [
+ { slot => 1, state => Amanda::Changer::SLOT_FULL,
+ barcode => '11111',
+ device_status => $DEVICE_STATUS_SUCCESS,
+ f_type => $Amanda::Header::F_TAPESTART, label => 'TAPE-1',
+ reserved => 1, loaded_in => 0 },
+ { slot => 2, state => Amanda::Changer::SLOT_FULL,
+ barcode => '22222',
+ device_status => $DEVICE_STATUS_SUCCESS,
+ f_type => $Amanda::Header::F_TAPESTART, label => 'TAPE-2' },
+ { slot => 3, state => Amanda::Changer::SLOT_FULL,
+ barcode => '33333',
+ device_status => undef, f_type => undef, label => undef },
+ { slot => 4, state => Amanda::Changer::SLOT_FULL,
+ barcode => '44444', reserved => 1, loaded_in => 1, current => 1,
+ device_status => $DEVICE_STATUS_SUCCESS,
+ f_type => $Amanda::Header::F_TAPESTART, label => 'TAPE-4' },
+ { slot => 5, state => Amanda::Changer::SLOT_EMPTY,
+ device_status => undef, f_type => undef, label => undef },
+ ], "$pfx: inventory is up to date after more labelings");
+ };
+
+ step release2 => sub {
+ is_deeply({
+ loaded_in => $chg->{'__last_state'}->{'slots'}->{4}->{'loaded_in'},
+ orig_slot => $chg->{'__last_state'}->{'drives'}->{1}->{'orig_slot'},
+ slot_label => $chg->{'__last_state'}->{'slots'}->{4}->{'label'},
+ drive_label => $chg->{'__last_state'}->{'drives'}->{1}->{'label'},
+ }, {
+ loaded_in => 1,
+ orig_slot => 4,
+ slot_label => 'TAPE-4',
+ drive_label => 'TAPE-4',
+ }, "$pfx: label is correctly reflected in changer state");
+
+ $res1->release(finished_cb => $steps->{'release2_done'});
+ };
+
+ step release2_done => sub {
+ my ($err) = @_;
+ die $err if $err;
+
+ pass("$pfx: slot 1/drive 0 released");
+
+ is($chg->{'__last_state'}->{'drives'}->{0}->{'label'}, 'TAPE-1',
+ "$pfx: tape is still in drive");
+
+ $steps->{'release3'}->();
+ };
+
+ step release3 => sub {
+ my ($err) = @_;
+ die $err if $err;
+
+ $res2->release(finished_cb => $steps->{'release3_done'});
+ };
+
+ step release3_done => sub {
+ my ($err) = @_;
+ die $err if $err;
+
+ pass("$pfx: slot 4/drive 0 released");
+
+ is($chg->{'__last_state'}->{'drives'}->{1}->{'label'},
+ 'TAPE-4', "$pfx: tape is still in drive");
+
+ $steps->{'load_preloaded_by_slot'}->();
+ };
+
+ # try loading a slot that's already in a drive
+ step load_preloaded_by_slot => sub {
+ $chg->load(slot => 1, res_cb => $steps->{'loaded_preloaded_by_slot'});
+ };
+
+ step loaded_preloaded_by_slot => sub {
+ (my $err, $res1) = @_;
+ die $err if $err;
+
+ is($res1->{'device'}->device_name, "file:$vtape_root/drive0",
+ "$pfx: loading a tape (by slot) that's already in a drive returns that drive");
+
+ $res1->release(finished_cb => $steps->{'load_preloaded_by_label'});
+ };
+
+ # try again, this time by label
+ step load_preloaded_by_label => sub {
+ pass("$pfx: slot 1/drive 0 released");
+
+ $chg->load(label => 'TAPE-4', res_cb => $steps->{'loaded_preloaded_by_label'});
+ };
+
+ step loaded_preloaded_by_label => sub {
+ (my $err, $res1) = @_;
+ die $err if $err;
+
+ is($res1->{'device'}->device_name, "file:$vtape_root/drive1",
+ "$pfx: loading a tape (by label) that's already in a drive returns that drive");
+
+ $res1->release(finished_cb => $steps->{'load_unloaded_by_label'});
+ };
+
+ # test out searching by label
+ step load_unloaded_by_label => sub {
+ my ($err) = @_;
+ die $err if $err;
+
+ pass("$pfx: slot 4/drive 1 released");
+
+ $chg->load(label => 'TAPE-2', res_cb => $steps->{'loaded_unloaded_by_label'});
+ };
+
+ step loaded_unloaded_by_label => sub {
+ (my $err, $res1) = @_;
+ die $err if $err;
+
+ $res1->{'device'}->read_label();
+ is($res1->{'device'}->volume_label, "TAPE-2",
+ "$pfx: loading a tape (by label) that's *not* already in a drive returns " .
+ "the correct device");
+
+ $steps->{'release4'}->();
+ };
+
+ step release4 => sub {
+ $res1->release(finished_cb => $steps->{'release4_done'}, eject => 1);
+ };
+
+ step release4_done => sub {
+ my ($err) = @_;
+ die $err if $err;
+
+ pass("$pfx: slot 2/drive 0 released");
+
+ is_deeply({
+ loaded_in => $chg->{'__last_state'}->{'slots'}->{2}->{'loaded_in'},
+ slot_label => $chg->{'__last_state'}->{'slots'}->{2}->{'label'},
+ drive_label => $chg->{'__last_state'}->{'drives'}->{0}->{'label'},
+ }, {
+ loaded_in => undef,
+ slot_label => 'TAPE-2',
+ drive_label => undef,
+ }, "$pfx: and TAPE-2 ejected");
+
+ $steps->{'load_current_2'}->();
+ };
+
+ step load_current_2 => sub {
+ $chg->load(relative_slot => "current", res_cb => $steps->{'loaded_current_2'});
+ };
+
+ step loaded_current_2 => sub {
+ (my $err, $res1) = @_;
+ die $err if $err;
+
+ $res1->{'device'}->read_label();
+ is($res1->{'device'}->volume_label, "TAPE-4",
+ "$pfx: loading 'current' returns the correct device");
+
+ $steps->{'release5'}->();
+ };
+
+ step release5 => sub {
+ $res1->release(finished_cb => $steps->{'load_slot_next'});
+ };
+
+ step load_slot_next => sub {
+ my ($err) = @_;
+ die $err if $err;
+
+ pass("$pfx: slot 4/drive 1 released");
+
+ $chg->load(relative_slot => "next", res_cb => $steps->{'loaded_slot_next'});
+ };
+
+ step loaded_slot_next => sub {
+ (my $err, $res1) = @_;
+ die $err if $err;
+
+ $res1->{'device'}->read_label();
+ is($res1->{'device'}->volume_label, "TAPE-1",
+ "$pfx: loading 'next' returns the correct slot, skipping slot 5 and " .
+ "looping around to the beginning");
+
+ $steps->{'load_res1_next_slot'}->();
+ };
+
+ step load_res1_next_slot => sub {
+ $chg->load(relative_slot => "next", slot => $res1->{'this_slot'},
+ res_cb => $steps->{'loaded_res1_next_slot'});
+ };
+
+ step loaded_res1_next_slot => sub {
+ (my $err, $res2) = @_;
+ die $err if $err;
+
+ $res2->{'device'}->read_label();
+ is($res2->{'device'}->volume_label, "TAPE-2",
+ "$pfx: \$res->{this_slot} + 'next' returns the correct slot, too");
+ if ($mtx_config->{'barcodes'} == 1) {
+ is($res2->{'barcode'}, '22222',
+ "$pfx: result has a barcode");
+ }
+
+ $steps->{'release6'}->();
+ };
+
+ step release6 => sub {
+ $res1->release(finished_cb => $steps->{'release7'});
+ };
+
+ step release7 => sub {
+ my ($err) = @_;
+ die "$err" if $err;
+
+ pass("$pfx: slot 1 released");
+
+ $res2->release(finished_cb => $steps->{'load_disallowed_slot'});
+ };
+
+ step load_disallowed_slot => sub {
+ my ($err) = @_;
+ die $err if $err;
+
+ pass("$pfx: slot 2 released");
+
+ $chg->load(slot => 6, res_cb => $steps->{'loaded_disallowed_slot'});
+ };
+
+ step loaded_disallowed_slot => sub {
+ (my $err, $res1) = @_;
+
+ chg_err_like($err,
+ { message => "slot 6 not in use-slots (1-5)",
+ reason => 'invalid',
+ type => 'failed' },
+ "$pfx: loading a disallowed slot fails propertly");
+
+ $steps->{'inventory5'}->();
+ };
+
+ step inventory5 => sub {
+ check_inventory($chg, $mtx_config->{'barcodes'} > 0, $steps->{'try_update'}, [
+ { slot => 1, state => Amanda::Changer::SLOT_FULL,
+ barcode => '11111', loaded_in => 1,
+ device_status => $DEVICE_STATUS_SUCCESS,
+ f_type => $Amanda::Header::F_TAPESTART, label => 'TAPE-1' },
+ { slot => 2, state => Amanda::Changer::SLOT_FULL,
+ barcode => '22222', loaded_in => 0,
+ device_status => $DEVICE_STATUS_SUCCESS,
+ f_type => $Amanda::Header::F_TAPESTART, label => 'TAPE-2' },
+ { slot => 3, state => Amanda::Changer::SLOT_FULL,
+ barcode => '33333',
+ device_status => undef, f_type => undef, label => undef },
+ { slot => 4, state => Amanda::Changer::SLOT_FULL,
+ barcode => '44444', current => 1,
+ device_status => $DEVICE_STATUS_SUCCESS,
+ f_type => $Amanda::Header::F_TAPESTART, label => 'TAPE-4' },
+ { slot => 5, state => Amanda::Changer::SLOT_EMPTY,
+ device_status => undef, f_type => undef, label => undef },
+ ], "$pfx: inventory still accurate");
+ };
+
+ step try_update => sub {
+ # first, add a label in slot 3, which hasn't been written
+ # to yet
+ my $dev = Amanda::Device->new("file:$vtape_root/slot3");
+ die $dev->error_or_status()
+ unless $dev->status == 0;
+ die "error writing label"
+ unless $dev->start($Amanda::Device::ACCESS_WRITE, "TAPE-3", undef);
+ $dev->finish();
+
+ # now update that slot
+ $chg->update(changed => "2-4", finished_cb => $steps->{'update_finished'});
+ };
+
+ step update_finished => sub {
+ my ($err) = @_;
+ die "$err" if $err;
+
+ # verify that slots 2, 3, and 4 have correct info now
+ is_deeply({
+ slot_2 => $chg->{'__last_state'}->{'slots'}->{2}->{'label'},
+ slot_3 => $chg->{'__last_state'}->{'slots'}->{3}->{'label'},
+ slot_4 => $chg->{'__last_state'}->{'slots'}->{4}->{'label'},
+ }, {
+ slot_2 => 'TAPE-2',
+ slot_3 => 'TAPE-3',
+ slot_4 => 'TAPE-4',
+ }, "$pfx: update correctly finds new label in slot 3");
+
+ # and check barcodes otherwise
+ if ($mtx_config->{'barcodes'} > 0) {
+ is_deeply({
+ barcode_2 => $chg->{'__last_state'}->{'bc2lb'}->{'22222'},
+ barcode_3 => $chg->{'__last_state'}->{'bc2lb'}->{'33333'},
+ barcode_4 => $chg->{'__last_state'}->{'bc2lb'}->{'44444'},
+ }, {
+ barcode_2 => 'TAPE-2',
+ barcode_3 => 'TAPE-3',
+ barcode_4 => 'TAPE-4',
+ }, "$pfx: bc2lb is correct, too");
+ }
+
+ $steps->{'try_update2'}->();
+ };
+
+ step try_update2 => sub {
+ # lie about slot 2
+ $chg->update(changed => "2=SURPRISE!", finished_cb => $steps->{'update_finished2'});
+ };
+
+ step update_finished2 => sub {
+ my ($err) = @_;
+ die "$err" if $err;
+
+ # verify the new slot info
+ is_deeply({
+ slot_2 => $chg->{'__last_state'}->{'slots'}->{2}->{'label'},
+ }, {
+ slot_2 => 'SURPRISE!',
+ }, "$pfx: assignment-style update correctly sets new label in slot 2");
+
+ # and check barcodes otherwise
+ if ($mtx_config->{'barcodes'} > 0) {
+ is_deeply({
+ barcode_2 => $chg->{'__last_state'}->{'bc2lb'}->{'22222'},
+ }, {
+ barcode_2 => 'SURPRISE!',
+ }, "$pfx: bc2lb is correct, too");
+ }
+
+ $steps->{'try_update3'}->();
+ };
+
+ step try_update3 => sub {
+ # lie about slot 2
+ $chg->update(changed => "5=NO!", finished_cb => $steps->{'update_finished3'});
+ };
+
+ step update_finished3 => sub {
+ my ($err) = @_;
+ chg_err_like($err,
+ { message => "slot 5 is empty",
+ reason => 'unknown',
+ type => 'failed' },
+ "$pfx: assignment-style update of an empty slot gives error");
+
+ $steps->{'inventory6'}->();
+ };
+
+ step inventory6 => sub {
+ # note that the loading behavior of update() is not required, so the loaded_in
+ # keys here may change if update() gets smarter
+ check_inventory($chg, $mtx_config->{'barcodes'} > 0, $steps->{'move1'}, [
+ { slot => 1, state => Amanda::Changer::SLOT_FULL,
+ barcode => '11111',
+ device_status => $DEVICE_STATUS_SUCCESS,
+ f_type => $Amanda::Header::F_TAPESTART, label => 'TAPE-1' },
+ { slot => 2, state => Amanda::Changer::SLOT_FULL,
+ barcode => '22222',
+ device_status => $DEVICE_STATUS_SUCCESS,
+ f_type => $Amanda::Header::F_TAPESTART, label => 'SURPRISE!' },
+ { slot => 3, state => Amanda::Changer::SLOT_FULL,
+ barcode => '33333', loaded_in => 1,
+ device_status => undef, f_type => undef, label => 'TAPE-3' },
+ { slot => 4, state => Amanda::Changer::SLOT_FULL,
+ barcode => '44444', loaded_in => 0, current => 1,
+ device_status => $DEVICE_STATUS_SUCCESS,
+ f_type => $Amanda::Header::F_TAPESTART, label => 'TAPE-4' },
+ { slot => 5, state => Amanda::Changer::SLOT_EMPTY,
+ device_status => undef, f_type => undef, label => undef },
+ ], "$pfx: inventory reflects updates");
+ };
+
+ step move1 => sub {
+ # move to a full slot
+ $chg->move(from_slot => 2, to_slot => 1, finished_cb => $steps->{'moved1'});
+ };
+
+ step moved1 => sub {
+ my ($err) = @_;
+
+ chg_err_like($err,
+ { message => "slot 1 is not empty",
+ reason => 'invalid',
+ type => 'failed' },
+ "$pfx: moving to a full slot is an error");
+
+ $steps->{'move2'}->();
+ };
+
+ step move2 => sub {
+ # move to a full slot that's loaded (so there's not *actually* a tape
+ # in the slot)
+ $chg->move(from_slot => 2, to_slot => 3, finished_cb => $steps->{'moved2'});
+ };
+
+ step moved2 => sub {
+ my ($err) = @_;
+
+ chg_err_like($err,
+ { message => "slot 3 is not empty",
+ reason => 'invalid',
+ type => 'failed' },
+ "$pfx: moving to a full slot is an error even if that slot is loaded");
+
+ $steps->{'move3'}->();
+ };
+
+ step move3 => sub {
+ # move from an empty slot
+ $chg->move(from_slot => 5, to_slot => 3, finished_cb => $steps->{'moved3'});
+ };
+
+ step moved3 => sub {
+ my ($err) = @_;
+
+ chg_err_like($err,
+ { message => "slot 5 is empty", # note that this depends on the order of checks..
+ reason => 'invalid',
+ type => 'failed' },
+ "$pfx: moving from an empty slot is an error");
+
+ $steps->{'move4'}->();
+ };
+
+ step move4 => sub {
+ # move from a loaded slot to an empty slot
+ $chg->move(from_slot => 4, to_slot => 5, finished_cb => $steps->{'moved4'});
+ };
+
+ step moved4 => sub {
+ my ($err) = @_;
+
+ chg_err_like($err,
+ { message => "slot 4 is currently loaded",
+ reason => 'invalid',
+ type => 'failed' },
+ "$pfx: moving from a loaded slot is an error");
+
+ $steps->{'move5'}->();
+ };
+
+ step move5 => sub {
+ $chg->move(from_slot => 2, to_slot => 5, finished_cb => $steps->{'inventory7'});
+ };
+
+
+ step inventory7 => sub {
+ my ($err) = @_;
+ die $err if $err;
+
+ pass("$pfx: move succeeds");
+
+ # note that the loading behavior of update() is not required, so the loaded_in
+ # keys here may change if update() gets smarter
+ check_inventory($chg, $mtx_config->{'barcodes'} > 0, $steps->{'start_scan'}, [
+ { slot => 1, state => Amanda::Changer::SLOT_FULL,
+ barcode => '11111',
+ device_status => $DEVICE_STATUS_SUCCESS,
+ f_type => $Amanda::Header::F_TAPESTART, label => 'TAPE-1' },
+ { slot => 2, state => Amanda::Changer::SLOT_EMPTY,
+ device_status => undef, f_type => undef, label => undef },
+ { slot => 3, state => Amanda::Changer::SLOT_FULL,
+ barcode => '33333', loaded_in => 1,
+ device_status => undef, f_type => undef, label => 'TAPE-3' },
+ { slot => 4, state => Amanda::Changer::SLOT_FULL,
+ barcode => '44444', loaded_in => 0, current => 1,
+ device_status => $DEVICE_STATUS_SUCCESS,
+ f_type => $Amanda::Header::F_TAPESTART, label => 'TAPE-4' },
+ { slot => 5, state => Amanda::Changer::SLOT_FULL,
+ barcode => '22222',
+ device_status => $DEVICE_STATUS_SUCCESS,
+ f_type => $Amanda::Header::F_TAPESTART, label => 'SURPRISE!' },
+ ], "$pfx: inventory reflects the move");
+ };
+
+ # test a scan, using except_slots
+ my %except_slots;
+
+ step start_scan => sub {
+ $chg->load(relative_slot => "current", except_slots => { %except_slots },
+ res_cb => $steps->{'loaded_for_scan'});
+ };
+
+ step loaded_for_scan => sub {
+ (my $err, $res1) = @_;
+ my $slot;
+ if ($err) {
+ if ($err->notfound) {
+ return $steps->{'scan_done'}->();
+ } elsif ($err->volinuse and defined $err->{'slot'}) {
+ $slot = $err->{'slot'};
+ } else {
+ die $err;
+ }
+ } else {
+ $slot = $res1->{'this_slot'};
+ }
+
+ $except_slots{$slot} = 1;
+
+ $res1->release(finished_cb => $steps->{'released_for_scan'});
+ };
+
+ step released_for_scan => sub {
+ my ($err) = @_;
+ die $err if $err;
+
+ $chg->load(relative_slot => 'next', slot => $res1->{'this_slot'},
+ except_slots => { %except_slots },
+ res_cb => $steps->{'loaded_for_scan'});
+ };
+
+ step scan_done => sub {
+ is_deeply({ %except_slots }, { 4=>1, 5=>1, 1=>1, 3=>1 },
+ "$pfx: scanning with except_slots works");
+ check_inventory($chg, $mtx_config->{'barcodes'} > 0, $steps->{'update_unknown'}, [
+ { slot => 1, state => Amanda::Changer::SLOT_FULL,
+ barcode => '11111', loaded_in => 0,
+ device_status => $DEVICE_STATUS_SUCCESS,
+ f_type => $Amanda::Header::F_TAPESTART, label => 'TAPE-1' },
+ { slot => 2, state => Amanda::Changer::SLOT_EMPTY,
+ device_status => undef, f_type => undef, label => undef },
+ { slot => 3, state => Amanda::Changer::SLOT_FULL,
+ barcode => '33333', loaded_in => 1,
+ device_status => undef, f_type => undef, label => 'TAPE-3' },
+ { slot => 4, state => Amanda::Changer::SLOT_FULL,
+ barcode => '44444', current => 1,
+ device_status => $DEVICE_STATUS_SUCCESS,
+ f_type => $Amanda::Header::F_TAPESTART, label => 'TAPE-4' },
+ { slot => 5, state => Amanda::Changer::SLOT_FULL,
+ barcode => '22222',
+ device_status => $DEVICE_STATUS_SUCCESS,
+ f_type => $Amanda::Header::F_TAPESTART, label => 'TAPE-2' },
+ ], "$pfx: inventory before updates with unknown state");
+ };
+
+ step update_unknown => sub {
+ $chg->update(changed => "3-4=", finished_cb => $steps->{'update_unknown_finished'});
+ };
+
+ step update_unknown_finished => sub {
+ my ($err) = @_;
+ die "$err" if $err;
+
+ if ($mtx_config->{'barcodes'} > 0) {
+ check_inventory($chg, $mtx_config->{'barcodes'} > 0, $steps->{'quit'}, [
+ { slot => 1, state => Amanda::Changer::SLOT_FULL,
+ barcode => '11111', loaded_in => 0,
+ device_status => $DEVICE_STATUS_SUCCESS,
+ f_type => $Amanda::Header::F_TAPESTART, label => 'TAPE-1' },
+ { slot => 2, state => Amanda::Changer::SLOT_EMPTY,
+ device_status => undef, f_type => undef, label => undef },
+ { slot => 3, state => Amanda::Changer::SLOT_FULL,
+ barcode => '33333', loaded_in => 1,
+ device_status => undef, f_type => undef, label => 'TAPE-3' },
+ { slot => 4, state => Amanda::Changer::SLOT_FULL,
+ barcode => '44444', current => 1,
+ device_status => $DEVICE_STATUS_SUCCESS,
+ f_type => $Amanda::Header::F_TAPESTART, label => 'TAPE-4' },
+ { slot => 5, state => Amanda::Changer::SLOT_FULL,
+ barcode => '22222',
+ device_status => $DEVICE_STATUS_SUCCESS,
+ f_type => $Amanda::Header::F_TAPESTART, label => 'TAPE-2' },
+ ], "$pfx: inventory reflects updates with unknown state with barcodes");
+ } else {
+ check_inventory($chg, $mtx_config->{'barcodes'} > 0, $steps->{'quit'}, [
+ { slot => 1, state => Amanda::Changer::SLOT_FULL,
+ barcode => '11111', loaded_in => 0,
+ device_status => $DEVICE_STATUS_SUCCESS,
+ f_type => $Amanda::Header::F_TAPESTART, label => 'TAPE-1' },
+ { slot => 2, state => Amanda::Changer::SLOT_EMPTY,
+ device_status => undef, f_type => undef, label => undef },
+ { slot => 3, state => Amanda::Changer::SLOT_FULL,
+ barcode => '33333', loaded_in => 1,
+ device_status => undef, f_type => undef, label => undef },
+ { slot => 4, state => Amanda::Changer::SLOT_FULL,
+ barcode => '44444', current => 1,
+ device_status => undef, f_type => undef, label => undef },
+ { slot => 5, state => Amanda::Changer::SLOT_FULL,
+ barcode => '22222',
+ device_status => $DEVICE_STATUS_SUCCESS,
+ f_type => $Amanda::Header::F_TAPESTART, label => 'TAPE-2' },
+ ], "$pfx: inventory reflects updates with unknown state without barcodes");
+ }
+ };
+
+ step quit => sub {
+ unlink($chg_state_file) if -f $chg_state_file;
+ unlink($mtx_state_file) if -f $mtx_state_file;
+ rmtree($vtape_root);
+
+ $finished_cb->();
+ };
+}
+
+# These tests are run over a number of different mtx configurations, to ensure
+# that the behavior is identical regardless of the changer/mtx characteristics
+for my $mtx_config (
+ { barcodes => 1, track_orig => 1, },
+ { barcodes => 0, track_orig => 1, },
+ { barcodes => 1, track_orig => -1, },
+ { barcodes => 0, track_orig => 0, },
+ { barcodes => -1, track_orig => 0, },
+ ) {
+ test_changer($mtx_config, \&Amanda::MainLoop::quit);
+ Amanda::MainLoop::run();
+}