--- /dev/null
+DEFAULT_DESIGN_ASSISTANT_SETTINGS
+{
+ HCPY_ALOAD_SIGNALS = OFF;
+ HCPY_VREF_PINS = OFF;
+ HCPY_CAT = OFF;
+ HCPY_ILLEGAL_HC_DEV_PKG = OFF;
+ ACLK_RULE_IMSZER_ADOMAIN = OFF;
+ ACLK_RULE_SZER_BTW_ACLK_DOMAIN = OFF;
+ ACLK_RULE_NO_SZER_ACLK_DOMAIN = OFF;
+ ACLK_CAT = OFF;
+ SIGNALRACE_RULE_ASYNCHPIN_SYNCH_CLKPIN = OFF;
+ SIGNALRACE_CAT = OFF;
+ NONSYNCHSTRUCT_RULE_LATCH_UNIDENTIFIED = OFF;
+ NONSYNCHSTRUCT_RULE_SRLATCH = OFF;
+ NONSYNCHSTRUCT_RULE_DLATCH = OFF;
+ NONSYNCHSTRUCT_RULE_MULTI_VIBRATOR = OFF;
+ NONSYNCHSTRUCT_RULE_ILLEGAL_PULSE_GEN = OFF;
+ NONSYNCHSTRUCT_RULE_RIPPLE_CLK = OFF;
+ NONSYNCHSTRUCT_RULE_DELAY_CHAIN = OFF;
+ NONSYNCHSTRUCT_RULE_REG_LOOP = OFF;
+ NONSYNCHSTRUCT_RULE_COMBLOOP = OFF;
+ NONSYNCHSTRUCT_CAT = OFF;
+ NONSYNCHSTRUCT_RULE_COMB_DRIVES_RAM_WE = OFF;
+ TIMING_RULE_COIN_CLKEDGE = OFF;
+ TIMING_RULE_SHIFT_REG = OFF;
+ TIMING_RULE_HIGH_FANOUTS = OFF;
+ TIMING_CAT = OFF;
+ RESET_RULE_ALL = OFF;
+ RESET_RULE_IMSYNCH_ASYNCH_DOMAIN = OFF;
+ RESET_RULE_UNSYNCH_ASYNCH_DOMAIN = OFF;
+ RESET_RULE_REG_ASNYCH = OFF;
+ RESET_RULE_COMB_ASYNCH_RESET = OFF;
+ RESET_RULE_IMSYNCH_EXRESET = OFF;
+ RESET_RULE_UNSYNCH_EXRESET = OFF;
+ RESET_RULE_INPINS_RESETNET = OFF;
+ RESET_CAT = OFF;
+ CLK_RULE_ALL = OFF;
+ CLK_RULE_MIX_EDGES = OFF;
+ CLK_RULE_CLKNET_CLKSPINES = OFF;
+ CLK_RULE_INPINS_CLKNET = OFF;
+ CLK_RULE_GATING_SCHEME = OFF;
+ CLK_RULE_INV_CLOCK = OFF;
+ CLK_RULE_COMB_CLOCK = OFF;
+ CLK_CAT = OFF;
+ HCPY_EXCEED_USER_IO_USAGE = OFF;
+ HCPY_EXCEED_RAM_USAGE = OFF;
+ NONSYNCHSTRUCT_RULE_ASYN_RAM = OFF;
+ SIGNALRACE_RULE_TRISTATE = OFF;
+ ASSG_RULE_MISSING_TIMING = OFF;
+ ASSG_RULE_MISSING_FMAX = OFF;
+ ASSG_CAT = OFF;
+}
+SYNTHESIS_FITTING_SETTINGS
+{
+ AUTO_SHIFT_REGISTER_RECOGNITION = ON;
+ AUTO_DSP_RECOGNITION = ON;
+ AUTO_RAM_RECOGNITION = ON;
+ REMOVE_DUPLICATE_LOGIC = ON;
+ AUTO_TURBO_BIT = ON;
+ AUTO_MERGE_PLLS = ON;
+ AUTO_OPEN_DRAIN_PINS = ON;
+ AUTO_PARALLEL_EXPANDERS = ON;
+ AUTO_FAST_OUTPUT_ENABLE_REGISTERS = OFF;
+ AUTO_FAST_OUTPUT_REGISTERS = OFF;
+ AUTO_FAST_INPUT_REGISTERS = OFF;
+ AUTO_CASCADE_CHAINS = ON;
+ AUTO_CARRY_CHAINS = ON;
+ AUTO_DELAY_CHAINS = ON;
+ MAX7000_PARALLEL_EXPANDER_CHAIN_LENGTH = 4;
+ PARALLEL_EXPANDER_CHAIN_LENGTH = 16;
+ CASCADE_CHAIN_LENGTH = 2;
+ STRATIX_CARRY_CHAIN_LENGTH = 70;
+ MERCURY_CARRY_CHAIN_LENGTH = 48;
+ FLEX10K_CARRY_CHAIN_LENGTH = 32;
+ FLEX6K_CARRY_CHAIN_LENGTH = 32;
+ CARRY_CHAIN_LENGTH = 48;
+ CARRY_OUT_PINS_LCELL_INSERT = ON;
+ NORMAL_LCELL_INSERT = ON;
+ AUTO_LCELL_INSERTION = ON;
+ ALLOW_XOR_GATE_USAGE = ON;
+ AUTO_PACKED_REGISTERS_STRATIX = NORMAL;
+ AUTO_PACKED_REGISTERS = OFF;
+ AUTO_PACKED_REG_CYCLONE = NORMAL;
+ FLEX10K_OPTIMIZATION_TECHNIQUE = AREA;
+ FLEX6K_OPTIMIZATION_TECHNIQUE = AREA;
+ MERCURY_OPTIMIZATION_TECHNIQUE = AREA;
+ APEX20K_OPTIMIZATION_TECHNIQUE = SPEED;
+ MAX7000_OPTIMIZATION_TECHNIQUE = SPEED;
+ STRATIX_OPTIMIZATION_TECHNIQUE = SPEED;
+ CYCLONE_OPTIMIZATION_TECHNIQUE = AREA;
+ FLEX10K_TECHNOLOGY_MAPPER = LUT;
+ FLEX6K_TECHNOLOGY_MAPPER = LUT;
+ MERCURY_TECHNOLOGY_MAPPER = LUT;
+ APEX20K_TECHNOLOGY_MAPPER = LUT;
+ MAX7000_TECHNOLOGY_MAPPER = "PRODUCT TERM";
+ STRATIX_TECHNOLOGY_MAPPER = LUT;
+ AUTO_IMPLEMENT_IN_ROM = OFF;
+ AUTO_GLOBAL_MEMORY_CONTROLS = OFF;
+ AUTO_GLOBAL_REGISTER_CONTROLS = ON;
+ AUTO_GLOBAL_OE = ON;
+ AUTO_GLOBAL_CLOCK = ON;
+ USE_LPM_FOR_AHDL_OPERATORS = ON;
+ LIMIT_AHDL_INTEGERS_TO_32_BITS = OFF;
+ ENABLE_BUS_HOLD_CIRCUITRY = OFF;
+ WEAK_PULL_UP_RESISTOR = OFF;
+ TURBO_BIT = ON;
+ MAX7000_IGNORE_SOFT_BUFFERS = OFF;
+ IGNORE_SOFT_BUFFERS = ON;
+ MAX7000_IGNORE_LCELL_BUFFERS = AUTO;
+ IGNORE_LCELL_BUFFERS = OFF;
+ IGNORE_ROW_GLOBAL_BUFFERS = OFF;
+ IGNORE_GLOBAL_BUFFERS = OFF;
+ IGNORE_CASCADE_BUFFERS = OFF;
+ IGNORE_CARRY_BUFFERS = OFF;
+ REMOVE_DUPLICATE_REGISTERS = ON;
+ REMOVE_REDUNDANT_LOGIC_CELLS = OFF;
+ ALLOW_POWER_UP_DONT_CARE = ON;
+ PCI_IO = OFF;
+ NOT_GATE_PUSH_BACK = ON;
+ SLOW_SLEW_RATE = OFF;
+ DSP_BLOCK_BALANCING = AUTO;
+ STATE_MACHINE_PROCESSING = AUTO;
+}
+DEFAULT_HARDCOPY_SETTINGS
+{
+ HARDCOPY_EXTERNAL_CLOCK_JITTER = "0.0 NS";
+}
+DEFAULT_TIMING_REQUIREMENTS
+{
+ INCLUDE_EXTERNAL_PIN_DELAYS_IN_FMAX_CALCULATIONS = OFF;
+ RUN_ALL_TIMING_ANALYSES = ON;
+ IGNORE_CLOCK_SETTINGS = OFF;
+ DEFAULT_HOLD_MULTICYCLE = "SAME AS MULTICYCLE";
+ CUT_OFF_IO_PIN_FEEDBACK = ON;
+ CUT_OFF_CLEAR_AND_PRESET_PATHS = ON;
+ CUT_OFF_READ_DURING_WRITE_PATHS = ON;
+ CUT_OFF_PATHS_BETWEEN_CLOCK_DOMAINS = ON;
+ DO_MIN_ANALYSIS = ON;
+ DO_MIN_TIMING = OFF;
+ NUMBER_OF_PATHS_TO_REPORT = 200;
+ NUMBER_OF_DESTINATION_TO_REPORT = 10;
+ NUMBER_OF_SOURCES_PER_DESTINATION_TO_REPORT = 10;
+ MAX_SCC_SIZE = 50;
+}
+HDL_SETTINGS
+{
+ VERILOG_INPUT_VERSION = VERILOG_2001;
+ ENABLE_IP_DEBUG = OFF;
+ VHDL_INPUT_VERSION = VHDL93;
+ VHDL_SHOW_LMF_MAPPING_MESSAGES = OFF;
+}
+PROJECT_INFO(usrp_radar_mono)
+{
+ ORIGINAL_QUARTUS_VERSION = 3.0;
+ PROJECT_CREATION_TIME_DATE = "00:14:04 JULY 13, 2003";
+ LAST_QUARTUS_VERSION = 3.0;
+ SHOW_REGISTRATION_MESSAGE = ON;
+ USER_LIBRARIES = "h:\\gnuradio\\trunk\\usrp\\fpga\\megacells";
+}
+THIRD_PARTY_EDA_TOOLS(usrp_radar_mono)
+{
+ EDA_DESIGN_ENTRY_SYNTHESIS_TOOL = "<NONE>";
+ EDA_SIMULATION_TOOL = "<NONE>";
+ EDA_TIMING_ANALYSIS_TOOL = "<NONE>";
+ EDA_BOARD_DESIGN_TOOL = "<NONE>";
+ EDA_FORMAL_VERIFICATION_TOOL = "<NONE>";
+ EDA_RESYNTHESIS_TOOL = "<NONE>";
+}
+EDA_TOOL_SETTINGS(eda_design_synthesis)
+{
+ EDA_INPUT_GND_NAME = GND;
+ EDA_INPUT_VCC_NAME = VCC;
+ EDA_SHOW_LMF_MAPPING_MESSAGES = OFF;
+ EDA_RUN_TOOL_AUTOMATICALLY = OFF;
+ EDA_INPUT_DATA_FORMAT = EDIF;
+ EDA_OUTPUT_DATA_FORMAT = NONE;
+ USE_GENERATED_PHYSICAL_CONSTRAINTS = ON;
+ RESYNTHESIS_PHYSICAL_SYNTHESIS = NORMAL;
+ RESYNTHESIS_OPTIMIZATION_EFFORT = NORMAL;
+ RESYNTHESIS_RETIMING = FULL;
+}
+EDA_TOOL_SETTINGS(eda_simulation)
+{
+ EDA_INCLUDE_VHDL_CONFIGURATION_DECLARATION = OFF;
+ EDA_TRUNCATE_LONG_HIERARCHY_PATHS = OFF;
+ EDA_MAINTAIN_DESIGN_HIERARCHY = OFF;
+ EDA_WRITE_DEVICE_CONTROL_PORTS = OFF;
+ EDA_GENERATE_FUNCTIONAL_NETLIST = OFF;
+ EDA_FLATTEN_BUSES = OFF;
+ EDA_MAP_ILLEGAL_CHARACTERS = OFF;
+ EDA_EXCALIBUR_ATOMS_AS_SINGLE_STRIPE = OFF;
+ EDA_RUN_TOOL_AUTOMATICALLY = OFF;
+ EDA_OUTPUT_DATA_FORMAT = NONE;
+ USE_GENERATED_PHYSICAL_CONSTRAINTS = ON;
+ RESYNTHESIS_PHYSICAL_SYNTHESIS = NORMAL;
+ RESYNTHESIS_OPTIMIZATION_EFFORT = NORMAL;
+ RESYNTHESIS_RETIMING = FULL;
+}
+EDA_TOOL_SETTINGS(eda_timing_analysis)
+{
+ EDA_INCLUDE_VHDL_CONFIGURATION_DECLARATION = OFF;
+ EDA_TRUNCATE_LONG_HIERARCHY_PATHS = OFF;
+ EDA_MAINTAIN_DESIGN_HIERARCHY = OFF;
+ EDA_WRITE_DEVICE_CONTROL_PORTS = OFF;
+ EDA_GENERATE_FUNCTIONAL_NETLIST = OFF;
+ EDA_FLATTEN_BUSES = OFF;
+ EDA_MAP_ILLEGAL_CHARACTERS = OFF;
+ EDA_EXCALIBUR_ATOMS_AS_SINGLE_STRIPE = OFF;
+ EDA_RUN_TOOL_AUTOMATICALLY = OFF;
+ EDA_OUTPUT_DATA_FORMAT = NONE;
+ EDA_LAUNCH_CMD_LINE_TOOL = OFF;
+ USE_GENERATED_PHYSICAL_CONSTRAINTS = ON;
+ RESYNTHESIS_PHYSICAL_SYNTHESIS = NORMAL;
+ RESYNTHESIS_OPTIMIZATION_EFFORT = NORMAL;
+ RESYNTHESIS_RETIMING = FULL;
+}
+EDA_TOOL_SETTINGS(eda_board_design)
+{
+ EDA_INCLUDE_VHDL_CONFIGURATION_DECLARATION = OFF;
+ EDA_TRUNCATE_LONG_HIERARCHY_PATHS = OFF;
+ EDA_MAINTAIN_DESIGN_HIERARCHY = OFF;
+ EDA_WRITE_DEVICE_CONTROL_PORTS = OFF;
+ EDA_GENERATE_FUNCTIONAL_NETLIST = OFF;
+ EDA_FLATTEN_BUSES = OFF;
+ EDA_MAP_ILLEGAL_CHARACTERS = OFF;
+ EDA_EXCALIBUR_ATOMS_AS_SINGLE_STRIPE = OFF;
+ EDA_RUN_TOOL_AUTOMATICALLY = OFF;
+ EDA_OUTPUT_DATA_FORMAT = NONE;
+ USE_GENERATED_PHYSICAL_CONSTRAINTS = ON;
+ RESYNTHESIS_PHYSICAL_SYNTHESIS = NORMAL;
+ RESYNTHESIS_OPTIMIZATION_EFFORT = NORMAL;
+ RESYNTHESIS_RETIMING = FULL;
+}
+EDA_TOOL_SETTINGS(eda_formal_verification)
+{
+ EDA_INCLUDE_VHDL_CONFIGURATION_DECLARATION = OFF;
+ EDA_TRUNCATE_LONG_HIERARCHY_PATHS = OFF;
+ EDA_MAINTAIN_DESIGN_HIERARCHY = OFF;
+ EDA_WRITE_DEVICE_CONTROL_PORTS = OFF;
+ EDA_GENERATE_FUNCTIONAL_NETLIST = OFF;
+ EDA_FLATTEN_BUSES = OFF;
+ EDA_MAP_ILLEGAL_CHARACTERS = OFF;
+ EDA_EXCALIBUR_ATOMS_AS_SINGLE_STRIPE = OFF;
+ EDA_RUN_TOOL_AUTOMATICALLY = OFF;
+ EDA_OUTPUT_DATA_FORMAT = NONE;
+ USE_GENERATED_PHYSICAL_CONSTRAINTS = ON;
+ RESYNTHESIS_PHYSICAL_SYNTHESIS = NORMAL;
+ RESYNTHESIS_OPTIMIZATION_EFFORT = NORMAL;
+ RESYNTHESIS_RETIMING = FULL;
+}
+EDA_TOOL_SETTINGS(eda_palace)
+{
+ EDA_INCLUDE_VHDL_CONFIGURATION_DECLARATION = OFF;
+ EDA_TRUNCATE_LONG_HIERARCHY_PATHS = OFF;
+ EDA_MAINTAIN_DESIGN_HIERARCHY = OFF;
+ EDA_WRITE_DEVICE_CONTROL_PORTS = OFF;
+ EDA_GENERATE_FUNCTIONAL_NETLIST = OFF;
+ EDA_FLATTEN_BUSES = OFF;
+ EDA_MAP_ILLEGAL_CHARACTERS = OFF;
+ EDA_EXCALIBUR_ATOMS_AS_SINGLE_STRIPE = OFF;
+ EDA_RUN_TOOL_AUTOMATICALLY = OFF;
+ EDA_OUTPUT_DATA_FORMAT = NONE;
+ RESYNTHESIS_RETIMING = FULL;
+ RESYNTHESIS_PHYSICAL_SYNTHESIS = NORMAL;
+ RESYNTHESIS_OPTIMIZATION_EFFORT = NORMAL;
+ USE_GENERATED_PHYSICAL_CONSTRAINTS = ON;
+}
+CLOCK(clk_120mhz)
+{
+ FMAX_REQUIREMENT = "120.0 MHz";
+ INCLUDE_EXTERNAL_PIN_DELAYS_IN_FMAX_CALCULATIONS = OFF;
+ DUTY_CYCLE = 50;
+ DIVIDE_BASE_CLOCK_PERIOD_BY = 1;
+ MULTIPLY_BASE_CLOCK_PERIOD_BY = 1;
+ INVERT_BASE_CLOCK = OFF;
+}
+CLOCK(usbclk)
+{
+ FMAX_REQUIREMENT = "48.0 MHz";
+ INCLUDE_EXTERNAL_PIN_DELAYS_IN_FMAX_CALCULATIONS = OFF;
+ DUTY_CYCLE = 50;
+ DIVIDE_BASE_CLOCK_PERIOD_BY = 1;
+ MULTIPLY_BASE_CLOCK_PERIOD_BY = 1;
+ INVERT_BASE_CLOCK = OFF;
+}
+CLOCK(SCLK)
+{
+ FMAX_REQUIREMENT = "1.0 MHz";
+ INCLUDE_EXTERNAL_PIN_DELAYS_IN_FMAX_CALCULATIONS = OFF;
+ DUTY_CYCLE = 50;
+ DIVIDE_BASE_CLOCK_PERIOD_BY = 1;
+ MULTIPLY_BASE_CLOCK_PERIOD_BY = 1;
+ INVERT_BASE_CLOCK = OFF;
+}
+CLOCK(adclk0)
+{
+ FMAX_REQUIREMENT = "60.0 MHz";
+ INCLUDE_EXTERNAL_PIN_DELAYS_IN_FMAX_CALCULATIONS = OFF;
+ DUTY_CYCLE = 50;
+ DIVIDE_BASE_CLOCK_PERIOD_BY = 1;
+ MULTIPLY_BASE_CLOCK_PERIOD_BY = 1;
+ INVERT_BASE_CLOCK = OFF;
+}
+CLOCK(adclk1)
+{
+ FMAX_REQUIREMENT = "60.0 MHz";
+ INCLUDE_EXTERNAL_PIN_DELAYS_IN_FMAX_CALCULATIONS = OFF;
+ DUTY_CYCLE = 50;
+ DIVIDE_BASE_CLOCK_PERIOD_BY = 1;
+ MULTIPLY_BASE_CLOCK_PERIOD_BY = 1;
+ INVERT_BASE_CLOCK = OFF;
+}
projects / debian / gnuradio / blobdiff