Imported Upstream version 3.2.2

[debian/gnuradio] / gr-gpio / src / fpga / lib / rx_chain.v

diff --git a/gr-gpio/src/fpga/lib/rx_chain.v b/gr-gpio/src/fpga/lib/rx_chain.v
new file mode 100644 (file)
index 0000000..172e978
--- /dev/null
+++ b/gr-gpio/src/fpga/lib/rx_chain.v
@@ -0,0 +1,121 @@
+// -*- verilog -*-
+//
+//  USRP - Universal Software Radio Peripheral
+//
+//  Copyright (C) 2003 Matt Ettus
+//
+//  This program is free software; you can redistribute it and/or modify
+//  it under the terms of the GNU General Public License as published by
+//  the Free Software Foundation; either version 2 of the License, or
+//  (at your option) any later version.
+//
+//  This program is distributed in the hope that it will be useful,
+//  but WITHOUT ANY WARRANTY; without even the implied warranty of
+//  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+//  GNU General Public License for more details.
+//
+//  You should have received a copy of the GNU General Public License
+//  along with this program; if not, write to the Free Software
+//  Foundation, Inc., 51 Franklin Street, Boston, MA  02110-1301  USA
+//
+
+// Following defines conditionally include RX path circuitry
+
+`include "config.vh"   // resolved relative to project root
+
+module rx_chain
+  (input clock,
+   input reset,
+   input enable,
+   input wire [7:0] decim_rate,
+   input sample_strobe,
+   input decimator_strobe,
+   output wire hb_strobe,
+   input [6:0] serial_addr, input [31:0] serial_data, input serial_strobe,
+   input wire [15:0] i_in,
+   input wire [15:0] q_in,
+   output wire [15:0] i_out,
+   output wire [15:0] q_out,
+   output wire [15:0] debugdata,output wire [15:0] debugctrl
+   );
+
+   parameter FREQADDR = 0;
+   parameter PHASEADDR = 0;
+   
+   wire [31:0] phase;
+   wire [15:0] bb_i, bb_q;
+   wire [15:0] hb_in_i, hb_in_q;
+   
+   assign      debugdata = hb_in_i;
+
+`ifdef RX_NCO_ON
+    phase_acc #(FREQADDR,PHASEADDR,32) rx_phase_acc
+     (.clk(clock),.reset(reset),.enable(enable),
+      .serial_addr(serial_addr),.serial_data(serial_data),.serial_strobe(serial_strobe),
+      .strobe(sample_strobe),.phase(phase) );
+
+   cordic rx_cordic
+     ( .clock(clock),.reset(reset),.enable(enable), 
+       .xi(i_in),.yi(q_in),.zi(phase[31:16]),
+       .xo(bb_i),.yo(bb_q),.zo() );
+`else
+   assign bb_i = i_in;
+   assign bb_q = q_in;
+   assign sample_strobe = 1;
+`endif // !`ifdef RX_NCO_ON
+
+`ifdef RX_INTEG_ON
+   integrator integ_decim_i_0
+     ( .clock(clock),.reset(reset),.enable(enable),
+       .rate(decim_rate),.strobe_in(sample_strobe),.strobe_out(decimator_strobe),
+       .signal_in(bb_i),.signal_out(i_out) );
+
+   assign hb_strobe = decimator_strobe;
+`else
+`ifdef RX_CIC_ON
+   cic_decim cic_decim_i_0
+     ( .clock(clock),.reset(reset),.enable(enable),
+       .rate(decim_rate),.strobe_in(sample_strobe),.strobe_out(decimator_strobe),
+       .signal_in(bb_i),.signal_out(hb_in_i) );
+`else
+   assign hb_in_i = bb_i;
+   assign decimator_strobe = sample_strobe;
+`endif
+   
+`ifdef RX_HB_ON
+   halfband_decim hbd_i_0
+     ( .clock(clock),.reset(reset),.enable(enable),
+       .strobe_in(decimator_strobe),.strobe_out(hb_strobe),
+       .data_in(hb_in_i),.data_out(i_out),.debugctrl(debugctrl) );
+`else
+   assign i_out = hb_in_i;
+   assign hb_strobe = decimator_strobe;
+`endif
+`endif // RX_INTEG_ON
+
+`ifdef RX_INTEG_ON
+   integrator integ_decim_q_0
+     ( .clock(clock),.reset(reset),.enable(enable),
+       .rate(decim_rate),.strobe_in(sample_strobe),.strobe_out(decimator_strobe),
+       .signal_in(bb_q),.signal_out(q_out) );
+`else   
+`ifdef RX_CIC_ON
+   cic_decim cic_decim_q_0
+     ( .clock(clock),.reset(reset),.enable(enable),
+       .rate(decim_rate),.strobe_in(sample_strobe),.strobe_out(decimator_strobe),
+       .signal_in(bb_q),.signal_out(hb_in_q) );
+`else
+   assign hb_in_q = bb_q;
+`endif
+
+`ifdef RX_HB_ON
+   halfband_decim hbd_q_0
+     ( .clock(clock),.reset(reset),.enable(enable),
+       .strobe_in(decimator_strobe),.strobe_out(),
+       .data_in(hb_in_q),.data_out(q_out) );   
+`else
+   assign q_out = hb_in_q;
+`endif
+`endif // RX_INTEG_ON
+
+endmodule // rx_chain