uint32_t bootrom_base, bootrom_size;
} const devices[] = {
{ 0x412, "Low-density device",
- 0x8000, 0x400, 0x2800, 0x1ffff000, 0x800 },
+ 0x8000, 0x400, 0x2800, 0x1ffff000, 0x800 }, // table 1, pm0063
{ 0x410, "Medium-density device",
- 0x20000, 0x400, 0x5000, 0x1ffff000, 0x800 },
+ 0x20000, 0x400, 0x5000, 0x1ffff000, 0x800 }, // table 2, pm0063
{ 0x414, "High-density device",
- 0x80000, 0x800, 0x10000, 0x1ffff000, 0x800 },
+ 0x80000, 0x800, 0x10000, 0x1ffff000, 0x800 }, // table 3 pm0063
+ // This ignores the EEPROM! (and uses the page erase size,
+ // not the sector write protection...)
+ { 0x416, "EnergyLite device",
+ 0x2000, 0x100, 0x4000, 0x1ff00000, 0x1000 },
{ 0x418, "Connectivity line device",
0x40000, 0x800, 0x10000, 0x1fffb000, 0x4800 },
{ 0x420, "Medium-density value line device",
0x20000, 0x400, 0x2000, 0x1ffff000, 0x800 },
{ 0x428, "High-density value line device",
0x80000, 0x800, 0x8000, 0x1ffff000, 0x800 },
- { 0x430, "XL-density device",
+ { 0x430, "XL-density device", // pm0068
0x100000, 0x800, 0x18000, 0x1fffe000, 0x1800 },
{ 0 }
};
if(stlink_current_mode(sl) != STLINK_DEV_DEBUG_MODE)
stlink_enter_swd_mode(sl);
- uint32_t chip_id;
-
- stlink_read_mem32(sl, 0xE0042000, 4);
- chip_id = sl->q_buf[0] | (sl->q_buf[1] << 8) | (sl->q_buf[2] << 16) |
- (sl->q_buf[3] << 24);
-
+ uint32_t chip_id = stlink_chip_id(sl);
printf("Chip ID is %08x.\n", chip_id);
const struct chip_params* params = NULL;
uint32_t flash_size;
- stlink_read_mem32(sl, 0x1FFFF7E0, 4);
+ stlink_read_mem32(sl, 0x1FFFF7E0, 4); // FIXME - that's never going to work!
flash_size = sl->q_buf[0] | (sl->q_buf[1] << 8);
printf("Flash size is %d KiB.\n", flash_size);