static const char* current_memory_map = NULL;
+/*
+ * Chip IDs are explained in the appropriate programming manual for the
+ * DBGMCU_IDCODE register (0xE0042000)
+ */
struct chip_params {
uint32_t chip_id;
char* description;
+ uint32_t flash_size_reg;
uint32_t max_flash_size, flash_pagesize;
uint32_t sram_size;
uint32_t bootrom_base, bootrom_size;
} const devices[] = {
- { 0x412, "Low-density device",
- 0x8000, 0x400, 0x2800, 0x1ffff000, 0x800 }, // table 1, pm0063
- { 0x410, "Medium-density device",
+ { 0x410, "F1 Medium-density device", 0x1ffff7e0,
0x20000, 0x400, 0x5000, 0x1ffff000, 0x800 }, // table 2, pm0063
- { 0x414, "High-density device",
+ { 0x411, "F2 device", 0, /* No flash size register found in the docs*/
+ 0x100000, 0x20000, 0x20000, 0x1ff00000, 0x7800 }, // table 1, pm0059
+ { 0x412, "F1 Low-density device", 0x1ffff7e0,
+ 0x8000, 0x400, 0x2800, 0x1ffff000, 0x800 }, // table 1, pm0063
+ { 0x413, "F4 device", 0x1FFF7A10,
+ 0x100000, 0x20000, 0x20000, 0x1ff00000, 0x7800 }, // table 1, pm0081
+ { 0x414, "F1 High-density device", 0x1ffff7e0,
0x80000, 0x800, 0x10000, 0x1ffff000, 0x800 }, // table 3 pm0063
// This ignores the EEPROM! (and uses the page erase size,
// not the sector write protection...)
- { 0x416, "EnergyLite device",
- 0x2000, 0x100, 0x4000, 0x1ff00000, 0x1000 },
- { 0x418, "Connectivity line device",
+ { 0x416, "L1 Med-density device", 0x1FF8004C, // table 1, pm0062
+ 0x20000, 0x100, 0x4000, 0x1ff00000, 0x1000 },
+ { 0x418, "F1 Connectivity line device", 0x1ffff7e0,
0x40000, 0x800, 0x10000, 0x1fffb000, 0x4800 },
- { 0x420, "Medium-density value line device",
+ { 0x420, "F1 Medium-density value line device", 0x1ffff7e0,
0x20000, 0x400, 0x2000, 0x1ffff000, 0x800 },
- { 0x428, "High-density value line device",
+ { 0x428, "F1 High-density value line device", 0x1ffff7e0,
0x80000, 0x800, 0x8000, 0x1ffff000, 0x800 },
- { 0x430, "XL-density device", // pm0068
+ { 0x430, "F1 XL-density device", 0x1ffff7e0, // pm0068
0x100000, 0x800, 0x18000, 0x1fffe000, 0x1800 },
{ 0 }
};
uint32_t flash_size;
- stlink_read_mem32(sl, 0x1FFFF7E0, 4); // FIXME - that's never going to work!
+ stlink_read_mem32(sl, params->flash_size_reg, 4);
flash_size = sl->q_buf[0] | (sl->q_buf[1] << 8);
printf("Flash size is %d KiB.\n", flash_size);