--- /dev/null
+/**\r
+ ******************************************************************************\r
+ * @file stm32f10x_sdio.h\r
+ * @author MCD Application Team\r
+ * @version V3.3.0\r
+ * @date 04/16/2010\r
+ * @brief This file contains all the functions prototypes for the SDIO firmware\r
+ * library.\r
+ ******************************************************************************\r
+ * @copy\r
+ *\r
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS\r
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE\r
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY\r
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING\r
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE\r
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.\r
+ *\r
+ * <h2><center>© COPYRIGHT 2010 STMicroelectronics</center></h2>\r
+ */ \r
+\r
+/* Define to prevent recursive inclusion -------------------------------------*/\r
+#ifndef __STM32F10x_SDIO_H\r
+#define __STM32F10x_SDIO_H\r
+\r
+#ifdef __cplusplus\r
+ extern "C" {\r
+#endif\r
+\r
+/* Includes ------------------------------------------------------------------*/\r
+#include "stm32f10x.h"\r
+\r
+/** @addtogroup STM32F10x_StdPeriph_Driver\r
+ * @{\r
+ */\r
+\r
+/** @addtogroup SDIO\r
+ * @{\r
+ */\r
+\r
+/** @defgroup SDIO_Exported_Types\r
+ * @{\r
+ */\r
+\r
+typedef struct\r
+{\r
+ uint32_t SDIO_ClockEdge; /*!< Specifies the clock transition on which the bit capture is made.\r
+ This parameter can be a value of @ref SDIO_Clock_Edge */\r
+\r
+ uint32_t SDIO_ClockBypass; /*!< Specifies whether the SDIO Clock divider bypass is\r
+ enabled or disabled.\r
+ This parameter can be a value of @ref SDIO_Clock_Bypass */\r
+\r
+ uint32_t SDIO_ClockPowerSave; /*!< Specifies whether SDIO Clock output is enabled or\r
+ disabled when the bus is idle.\r
+ This parameter can be a value of @ref SDIO_Clock_Power_Save */\r
+\r
+ uint32_t SDIO_BusWide; /*!< Specifies the SDIO bus width.\r
+ This parameter can be a value of @ref SDIO_Bus_Wide */\r
+\r
+ uint32_t SDIO_HardwareFlowControl; /*!< Specifies whether the SDIO hardware flow control is enabled or disabled.\r
+ This parameter can be a value of @ref SDIO_Hardware_Flow_Control */\r
+\r
+ uint8_t SDIO_ClockDiv; /*!< Specifies the clock frequency of the SDIO controller.\r
+ This parameter can be a value between 0x00 and 0xFF. */\r
+ \r
+} SDIO_InitTypeDef;\r
+\r
+typedef struct\r
+{\r
+ uint32_t SDIO_Argument; /*!< Specifies the SDIO command argument which is sent\r
+ to a card as part of a command message. If a command\r
+ contains an argument, it must be loaded into this register\r
+ before writing the command to the command register */\r
+\r
+ uint32_t SDIO_CmdIndex; /*!< Specifies the SDIO command index. It must be lower than 0x40. */\r
+\r
+ uint32_t SDIO_Response; /*!< Specifies the SDIO response type.\r
+ This parameter can be a value of @ref SDIO_Response_Type */\r
+\r
+ uint32_t SDIO_Wait; /*!< Specifies whether SDIO wait-for-interrupt request is enabled or disabled.\r
+ This parameter can be a value of @ref SDIO_Wait_Interrupt_State */\r
+\r
+ uint32_t SDIO_CPSM; /*!< Specifies whether SDIO Command path state machine (CPSM)\r
+ is enabled or disabled.\r
+ This parameter can be a value of @ref SDIO_CPSM_State */\r
+} SDIO_CmdInitTypeDef;\r
+\r
+typedef struct\r
+{\r
+ uint32_t SDIO_DataTimeOut; /*!< Specifies the data timeout period in card bus clock periods. */\r
+\r
+ uint32_t SDIO_DataLength; /*!< Specifies the number of data bytes to be transferred. */\r
+ \r
+ uint32_t SDIO_DataBlockSize; /*!< Specifies the data block size for block transfer.\r
+ This parameter can be a value of @ref SDIO_Data_Block_Size */\r
+ \r
+ uint32_t SDIO_TransferDir; /*!< Specifies the data transfer direction, whether the transfer\r
+ is a read or write.\r
+ This parameter can be a value of @ref SDIO_Transfer_Direction */\r
+ \r
+ uint32_t SDIO_TransferMode; /*!< Specifies whether data transfer is in stream or block mode.\r
+ This parameter can be a value of @ref SDIO_Transfer_Type */\r
+ \r
+ uint32_t SDIO_DPSM; /*!< Specifies whether SDIO Data path state machine (DPSM)\r
+ is enabled or disabled.\r
+ This parameter can be a value of @ref SDIO_DPSM_State */\r
+} SDIO_DataInitTypeDef;\r
+\r
+/**\r
+ * @}\r
+ */ \r
+\r
+/** @defgroup SDIO_Exported_Constants\r
+ * @{\r
+ */\r
+\r
+/** @defgroup SDIO_Clock_Edge \r
+ * @{\r
+ */\r
+\r
+#define SDIO_ClockEdge_Rising ((uint32_t)0x00000000)\r
+#define SDIO_ClockEdge_Falling ((uint32_t)0x00002000)\r
+#define IS_SDIO_CLOCK_EDGE(EDGE) (((EDGE) == SDIO_ClockEdge_Rising) || \\r
+ ((EDGE) == SDIO_ClockEdge_Falling))\r
+/**\r
+ * @}\r
+ */\r
+\r
+/** @defgroup SDIO_Clock_Bypass \r
+ * @{\r
+ */\r
+\r
+#define SDIO_ClockBypass_Disable ((uint32_t)0x00000000)\r
+#define SDIO_ClockBypass_Enable ((uint32_t)0x00000400) \r
+#define IS_SDIO_CLOCK_BYPASS(BYPASS) (((BYPASS) == SDIO_ClockBypass_Disable) || \\r
+ ((BYPASS) == SDIO_ClockBypass_Enable))\r
+/**\r
+ * @}\r
+ */ \r
+\r
+/** @defgroup SDIO_Clock_Power_Save \r
+ * @{\r
+ */\r
+\r
+#define SDIO_ClockPowerSave_Disable ((uint32_t)0x00000000)\r
+#define SDIO_ClockPowerSave_Enable ((uint32_t)0x00000200) \r
+#define IS_SDIO_CLOCK_POWER_SAVE(SAVE) (((SAVE) == SDIO_ClockPowerSave_Disable) || \\r
+ ((SAVE) == SDIO_ClockPowerSave_Enable))\r
+/**\r
+ * @}\r
+ */\r
+\r
+/** @defgroup SDIO_Bus_Wide \r
+ * @{\r
+ */\r
+\r
+#define SDIO_BusWide_1b ((uint32_t)0x00000000)\r
+#define SDIO_BusWide_4b ((uint32_t)0x00000800)\r
+#define SDIO_BusWide_8b ((uint32_t)0x00001000)\r
+#define IS_SDIO_BUS_WIDE(WIDE) (((WIDE) == SDIO_BusWide_1b) || ((WIDE) == SDIO_BusWide_4b) || \\r
+ ((WIDE) == SDIO_BusWide_8b))\r
+\r
+/**\r
+ * @}\r
+ */\r
+\r
+/** @defgroup SDIO_Hardware_Flow_Control \r
+ * @{\r
+ */\r
+\r
+#define SDIO_HardwareFlowControl_Disable ((uint32_t)0x00000000)\r
+#define SDIO_HardwareFlowControl_Enable ((uint32_t)0x00004000)\r
+#define IS_SDIO_HARDWARE_FLOW_CONTROL(CONTROL) (((CONTROL) == SDIO_HardwareFlowControl_Disable) || \\r
+ ((CONTROL) == SDIO_HardwareFlowControl_Enable))\r
+/**\r
+ * @}\r
+ */\r
+\r
+/** @defgroup SDIO_Power_State \r
+ * @{\r
+ */\r
+\r
+#define SDIO_PowerState_OFF ((uint32_t)0x00000000)\r
+#define SDIO_PowerState_ON ((uint32_t)0x00000003)\r
+#define IS_SDIO_POWER_STATE(STATE) (((STATE) == SDIO_PowerState_OFF) || ((STATE) == SDIO_PowerState_ON)) \r
+/**\r
+ * @}\r
+ */ \r
+\r
+\r
+/** @defgroup SDIO_Interrupt_soucres \r
+ * @{\r
+ */\r
+\r
+#define SDIO_IT_CCRCFAIL ((uint32_t)0x00000001)\r
+#define SDIO_IT_DCRCFAIL ((uint32_t)0x00000002)\r
+#define SDIO_IT_CTIMEOUT ((uint32_t)0x00000004)\r
+#define SDIO_IT_DTIMEOUT ((uint32_t)0x00000008)\r
+#define SDIO_IT_TXUNDERR ((uint32_t)0x00000010)\r
+#define SDIO_IT_RXOVERR ((uint32_t)0x00000020)\r
+#define SDIO_IT_CMDREND ((uint32_t)0x00000040)\r
+#define SDIO_IT_CMDSENT ((uint32_t)0x00000080)\r
+#define SDIO_IT_DATAEND ((uint32_t)0x00000100)\r
+#define SDIO_IT_STBITERR ((uint32_t)0x00000200)\r
+#define SDIO_IT_DBCKEND ((uint32_t)0x00000400)\r
+#define SDIO_IT_CMDACT ((uint32_t)0x00000800)\r
+#define SDIO_IT_TXACT ((uint32_t)0x00001000)\r
+#define SDIO_IT_RXACT ((uint32_t)0x00002000)\r
+#define SDIO_IT_TXFIFOHE ((uint32_t)0x00004000)\r
+#define SDIO_IT_RXFIFOHF ((uint32_t)0x00008000)\r
+#define SDIO_IT_TXFIFOF ((uint32_t)0x00010000)\r
+#define SDIO_IT_RXFIFOF ((uint32_t)0x00020000)\r
+#define SDIO_IT_TXFIFOE ((uint32_t)0x00040000)\r
+#define SDIO_IT_RXFIFOE ((uint32_t)0x00080000)\r
+#define SDIO_IT_TXDAVL ((uint32_t)0x00100000)\r
+#define SDIO_IT_RXDAVL ((uint32_t)0x00200000)\r
+#define SDIO_IT_SDIOIT ((uint32_t)0x00400000)\r
+#define SDIO_IT_CEATAEND ((uint32_t)0x00800000)\r
+#define IS_SDIO_IT(IT) ((((IT) & (uint32_t)0xFF000000) == 0x00) && ((IT) != (uint32_t)0x00))\r
+/**\r
+ * @}\r
+ */ \r
+\r
+/** @defgroup SDIO_Command_Index\r
+ * @{\r
+ */\r
+\r
+#define IS_SDIO_CMD_INDEX(INDEX) ((INDEX) < 0x40)\r
+/**\r
+ * @}\r
+ */\r
+\r
+/** @defgroup SDIO_Response_Type \r
+ * @{\r
+ */\r
+\r
+#define SDIO_Response_No ((uint32_t)0x00000000)\r
+#define SDIO_Response_Short ((uint32_t)0x00000040)\r
+#define SDIO_Response_Long ((uint32_t)0x000000C0)\r
+#define IS_SDIO_RESPONSE(RESPONSE) (((RESPONSE) == SDIO_Response_No) || \\r
+ ((RESPONSE) == SDIO_Response_Short) || \\r
+ ((RESPONSE) == SDIO_Response_Long))\r
+/**\r
+ * @}\r
+ */\r
+\r
+/** @defgroup SDIO_Wait_Interrupt_State \r
+ * @{\r
+ */\r
+\r
+#define SDIO_Wait_No ((uint32_t)0x00000000) /*!< SDIO No Wait, TimeOut is enabled */\r
+#define SDIO_Wait_IT ((uint32_t)0x00000100) /*!< SDIO Wait Interrupt Request */\r
+#define SDIO_Wait_Pend ((uint32_t)0x00000200) /*!< SDIO Wait End of transfer */\r
+#define IS_SDIO_WAIT(WAIT) (((WAIT) == SDIO_Wait_No) || ((WAIT) == SDIO_Wait_IT) || \\r
+ ((WAIT) == SDIO_Wait_Pend))\r
+/**\r
+ * @}\r
+ */\r
+\r
+/** @defgroup SDIO_CPSM_State \r
+ * @{\r
+ */\r
+\r
+#define SDIO_CPSM_Disable ((uint32_t)0x00000000)\r
+#define SDIO_CPSM_Enable ((uint32_t)0x00000400)\r
+#define IS_SDIO_CPSM(CPSM) (((CPSM) == SDIO_CPSM_Enable) || ((CPSM) == SDIO_CPSM_Disable))\r
+/**\r
+ * @}\r
+ */ \r
+\r
+/** @defgroup SDIO_Response_Registers \r
+ * @{\r
+ */\r
+\r
+#define SDIO_RESP1 ((uint32_t)0x00000000)\r
+#define SDIO_RESP2 ((uint32_t)0x00000004)\r
+#define SDIO_RESP3 ((uint32_t)0x00000008)\r
+#define SDIO_RESP4 ((uint32_t)0x0000000C)\r
+#define IS_SDIO_RESP(RESP) (((RESP) == SDIO_RESP1) || ((RESP) == SDIO_RESP2) || \\r
+ ((RESP) == SDIO_RESP3) || ((RESP) == SDIO_RESP4))\r
+/**\r
+ * @}\r
+ */\r
+\r
+/** @defgroup SDIO_Data_Length \r
+ * @{\r
+ */\r
+\r
+#define IS_SDIO_DATA_LENGTH(LENGTH) ((LENGTH) <= 0x01FFFFFF)\r
+/**\r
+ * @}\r
+ */\r
+\r
+/** @defgroup SDIO_Data_Block_Size \r
+ * @{\r
+ */\r
+\r
+#define SDIO_DataBlockSize_1b ((uint32_t)0x00000000)\r
+#define SDIO_DataBlockSize_2b ((uint32_t)0x00000010)\r
+#define SDIO_DataBlockSize_4b ((uint32_t)0x00000020)\r
+#define SDIO_DataBlockSize_8b ((uint32_t)0x00000030)\r
+#define SDIO_DataBlockSize_16b ((uint32_t)0x00000040)\r
+#define SDIO_DataBlockSize_32b ((uint32_t)0x00000050)\r
+#define SDIO_DataBlockSize_64b ((uint32_t)0x00000060)\r
+#define SDIO_DataBlockSize_128b ((uint32_t)0x00000070)\r
+#define SDIO_DataBlockSize_256b ((uint32_t)0x00000080)\r
+#define SDIO_DataBlockSize_512b ((uint32_t)0x00000090)\r
+#define SDIO_DataBlockSize_1024b ((uint32_t)0x000000A0)\r
+#define SDIO_DataBlockSize_2048b ((uint32_t)0x000000B0)\r
+#define SDIO_DataBlockSize_4096b ((uint32_t)0x000000C0)\r
+#define SDIO_DataBlockSize_8192b ((uint32_t)0x000000D0)\r
+#define SDIO_DataBlockSize_16384b ((uint32_t)0x000000E0)\r
+#define IS_SDIO_BLOCK_SIZE(SIZE) (((SIZE) == SDIO_DataBlockSize_1b) || \\r
+ ((SIZE) == SDIO_DataBlockSize_2b) || \\r
+ ((SIZE) == SDIO_DataBlockSize_4b) || \\r
+ ((SIZE) == SDIO_DataBlockSize_8b) || \\r
+ ((SIZE) == SDIO_DataBlockSize_16b) || \\r
+ ((SIZE) == SDIO_DataBlockSize_32b) || \\r
+ ((SIZE) == SDIO_DataBlockSize_64b) || \\r
+ ((SIZE) == SDIO_DataBlockSize_128b) || \\r
+ ((SIZE) == SDIO_DataBlockSize_256b) || \\r
+ ((SIZE) == SDIO_DataBlockSize_512b) || \\r
+ ((SIZE) == SDIO_DataBlockSize_1024b) || \\r
+ ((SIZE) == SDIO_DataBlockSize_2048b) || \\r
+ ((SIZE) == SDIO_DataBlockSize_4096b) || \\r
+ ((SIZE) == SDIO_DataBlockSize_8192b) || \\r
+ ((SIZE) == SDIO_DataBlockSize_16384b)) \r
+/**\r
+ * @}\r
+ */\r
+\r
+/** @defgroup SDIO_Transfer_Direction \r
+ * @{\r
+ */\r
+\r
+#define SDIO_TransferDir_ToCard ((uint32_t)0x00000000)\r
+#define SDIO_TransferDir_ToSDIO ((uint32_t)0x00000002)\r
+#define IS_SDIO_TRANSFER_DIR(DIR) (((DIR) == SDIO_TransferDir_ToCard) || \\r
+ ((DIR) == SDIO_TransferDir_ToSDIO))\r
+/**\r
+ * @}\r
+ */\r
+\r
+/** @defgroup SDIO_Transfer_Type \r
+ * @{\r
+ */\r
+\r
+#define SDIO_TransferMode_Block ((uint32_t)0x00000000)\r
+#define SDIO_TransferMode_Stream ((uint32_t)0x00000004)\r
+#define IS_SDIO_TRANSFER_MODE(MODE) (((MODE) == SDIO_TransferMode_Stream) || \\r
+ ((MODE) == SDIO_TransferMode_Block))\r
+/**\r
+ * @}\r
+ */\r
+\r
+/** @defgroup SDIO_DPSM_State \r
+ * @{\r
+ */\r
+\r
+#define SDIO_DPSM_Disable ((uint32_t)0x00000000)\r
+#define SDIO_DPSM_Enable ((uint32_t)0x00000001)\r
+#define IS_SDIO_DPSM(DPSM) (((DPSM) == SDIO_DPSM_Enable) || ((DPSM) == SDIO_DPSM_Disable))\r
+/**\r
+ * @}\r
+ */\r
+\r
+/** @defgroup SDIO_Flags \r
+ * @{\r
+ */\r
+\r
+#define SDIO_FLAG_CCRCFAIL ((uint32_t)0x00000001)\r
+#define SDIO_FLAG_DCRCFAIL ((uint32_t)0x00000002)\r
+#define SDIO_FLAG_CTIMEOUT ((uint32_t)0x00000004)\r
+#define SDIO_FLAG_DTIMEOUT ((uint32_t)0x00000008)\r
+#define SDIO_FLAG_TXUNDERR ((uint32_t)0x00000010)\r
+#define SDIO_FLAG_RXOVERR ((uint32_t)0x00000020)\r
+#define SDIO_FLAG_CMDREND ((uint32_t)0x00000040)\r
+#define SDIO_FLAG_CMDSENT ((uint32_t)0x00000080)\r
+#define SDIO_FLAG_DATAEND ((uint32_t)0x00000100)\r
+#define SDIO_FLAG_STBITERR ((uint32_t)0x00000200)\r
+#define SDIO_FLAG_DBCKEND ((uint32_t)0x00000400)\r
+#define SDIO_FLAG_CMDACT ((uint32_t)0x00000800)\r
+#define SDIO_FLAG_TXACT ((uint32_t)0x00001000)\r
+#define SDIO_FLAG_RXACT ((uint32_t)0x00002000)\r
+#define SDIO_FLAG_TXFIFOHE ((uint32_t)0x00004000)\r
+#define SDIO_FLAG_RXFIFOHF ((uint32_t)0x00008000)\r
+#define SDIO_FLAG_TXFIFOF ((uint32_t)0x00010000)\r
+#define SDIO_FLAG_RXFIFOF ((uint32_t)0x00020000)\r
+#define SDIO_FLAG_TXFIFOE ((uint32_t)0x00040000)\r
+#define SDIO_FLAG_RXFIFOE ((uint32_t)0x00080000)\r
+#define SDIO_FLAG_TXDAVL ((uint32_t)0x00100000)\r
+#define SDIO_FLAG_RXDAVL ((uint32_t)0x00200000)\r
+#define SDIO_FLAG_SDIOIT ((uint32_t)0x00400000)\r
+#define SDIO_FLAG_CEATAEND ((uint32_t)0x00800000)\r
+#define IS_SDIO_FLAG(FLAG) (((FLAG) == SDIO_FLAG_CCRCFAIL) || \\r
+ ((FLAG) == SDIO_FLAG_DCRCFAIL) || \\r
+ ((FLAG) == SDIO_FLAG_CTIMEOUT) || \\r
+ ((FLAG) == SDIO_FLAG_DTIMEOUT) || \\r
+ ((FLAG) == SDIO_FLAG_TXUNDERR) || \\r
+ ((FLAG) == SDIO_FLAG_RXOVERR) || \\r
+ ((FLAG) == SDIO_FLAG_CMDREND) || \\r
+ ((FLAG) == SDIO_FLAG_CMDSENT) || \\r
+ ((FLAG) == SDIO_FLAG_DATAEND) || \\r
+ ((FLAG) == SDIO_FLAG_STBITERR) || \\r
+ ((FLAG) == SDIO_FLAG_DBCKEND) || \\r
+ ((FLAG) == SDIO_FLAG_CMDACT) || \\r
+ ((FLAG) == SDIO_FLAG_TXACT) || \\r
+ ((FLAG) == SDIO_FLAG_RXACT) || \\r
+ ((FLAG) == SDIO_FLAG_TXFIFOHE) || \\r
+ ((FLAG) == SDIO_FLAG_RXFIFOHF) || \\r
+ ((FLAG) == SDIO_FLAG_TXFIFOF) || \\r
+ ((FLAG) == SDIO_FLAG_RXFIFOF) || \\r
+ ((FLAG) == SDIO_FLAG_TXFIFOE) || \\r
+ ((FLAG) == SDIO_FLAG_RXFIFOE) || \\r
+ ((FLAG) == SDIO_FLAG_TXDAVL) || \\r
+ ((FLAG) == SDIO_FLAG_RXDAVL) || \\r
+ ((FLAG) == SDIO_FLAG_SDIOIT) || \\r
+ ((FLAG) == SDIO_FLAG_CEATAEND))\r
+\r
+#define IS_SDIO_CLEAR_FLAG(FLAG) ((((FLAG) & (uint32_t)0xFF3FF800) == 0x00) && ((FLAG) != (uint32_t)0x00))\r
+\r
+#define IS_SDIO_GET_IT(IT) (((IT) == SDIO_IT_CCRCFAIL) || \\r
+ ((IT) == SDIO_IT_DCRCFAIL) || \\r
+ ((IT) == SDIO_IT_CTIMEOUT) || \\r
+ ((IT) == SDIO_IT_DTIMEOUT) || \\r
+ ((IT) == SDIO_IT_TXUNDERR) || \\r
+ ((IT) == SDIO_IT_RXOVERR) || \\r
+ ((IT) == SDIO_IT_CMDREND) || \\r
+ ((IT) == SDIO_IT_CMDSENT) || \\r
+ ((IT) == SDIO_IT_DATAEND) || \\r
+ ((IT) == SDIO_IT_STBITERR) || \\r
+ ((IT) == SDIO_IT_DBCKEND) || \\r
+ ((IT) == SDIO_IT_CMDACT) || \\r
+ ((IT) == SDIO_IT_TXACT) || \\r
+ ((IT) == SDIO_IT_RXACT) || \\r
+ ((IT) == SDIO_IT_TXFIFOHE) || \\r
+ ((IT) == SDIO_IT_RXFIFOHF) || \\r
+ ((IT) == SDIO_IT_TXFIFOF) || \\r
+ ((IT) == SDIO_IT_RXFIFOF) || \\r
+ ((IT) == SDIO_IT_TXFIFOE) || \\r
+ ((IT) == SDIO_IT_RXFIFOE) || \\r
+ ((IT) == SDIO_IT_TXDAVL) || \\r
+ ((IT) == SDIO_IT_RXDAVL) || \\r
+ ((IT) == SDIO_IT_SDIOIT) || \\r
+ ((IT) == SDIO_IT_CEATAEND))\r
+\r
+#define IS_SDIO_CLEAR_IT(IT) ((((IT) & (uint32_t)0xFF3FF800) == 0x00) && ((IT) != (uint32_t)0x00))\r
+\r
+/**\r
+ * @}\r
+ */\r
+\r
+/** @defgroup SDIO_Read_Wait_Mode \r
+ * @{\r
+ */\r
+\r
+#define SDIO_ReadWaitMode_CLK ((uint32_t)0x00000001)\r
+#define SDIO_ReadWaitMode_DATA2 ((uint32_t)0x00000000)\r
+#define IS_SDIO_READWAIT_MODE(MODE) (((MODE) == SDIO_ReadWaitMode_CLK) || \\r
+ ((MODE) == SDIO_ReadWaitMode_DATA2))\r
+/**\r
+ * @}\r
+ */\r
+\r
+/**\r
+ * @}\r
+ */\r
+\r
+/** @defgroup SDIO_Exported_Macros\r
+ * @{\r
+ */\r
+\r
+/**\r
+ * @}\r
+ */\r
+\r
+/** @defgroup SDIO_Exported_Functions\r
+ * @{\r
+ */\r
+\r
+void SDIO_DeInit(void);\r
+void SDIO_Init(SDIO_InitTypeDef* SDIO_InitStruct);\r
+void SDIO_StructInit(SDIO_InitTypeDef* SDIO_InitStruct);\r
+void SDIO_ClockCmd(FunctionalState NewState);\r
+void SDIO_SetPowerState(uint32_t SDIO_PowerState);\r
+uint32_t SDIO_GetPowerState(void);\r
+void SDIO_ITConfig(uint32_t SDIO_IT, FunctionalState NewState);\r
+void SDIO_DMACmd(FunctionalState NewState);\r
+void SDIO_SendCommand(SDIO_CmdInitTypeDef *SDIO_CmdInitStruct);\r
+void SDIO_CmdStructInit(SDIO_CmdInitTypeDef* SDIO_CmdInitStruct);\r
+uint8_t SDIO_GetCommandResponse(void);\r
+uint32_t SDIO_GetResponse(uint32_t SDIO_RESP);\r
+void SDIO_DataConfig(SDIO_DataInitTypeDef* SDIO_DataInitStruct);\r
+void SDIO_DataStructInit(SDIO_DataInitTypeDef* SDIO_DataInitStruct);\r
+uint32_t SDIO_GetDataCounter(void);\r
+uint32_t SDIO_ReadData(void);\r
+void SDIO_WriteData(uint32_t Data);\r
+uint32_t SDIO_GetFIFOCount(void);\r
+void SDIO_StartSDIOReadWait(FunctionalState NewState);\r
+void SDIO_StopSDIOReadWait(FunctionalState NewState);\r
+void SDIO_SetSDIOReadWaitMode(uint32_t SDIO_ReadWaitMode);\r
+void SDIO_SetSDIOOperation(FunctionalState NewState);\r
+void SDIO_SendSDIOSuspendCmd(FunctionalState NewState);\r
+void SDIO_CommandCompletionCmd(FunctionalState NewState);\r
+void SDIO_CEATAITCmd(FunctionalState NewState);\r
+void SDIO_SendCEATACmd(FunctionalState NewState);\r
+FlagStatus SDIO_GetFlagStatus(uint32_t SDIO_FLAG);\r
+void SDIO_ClearFlag(uint32_t SDIO_FLAG);\r
+ITStatus SDIO_GetITStatus(uint32_t SDIO_IT);\r
+void SDIO_ClearITPendingBit(uint32_t SDIO_IT);\r
+\r
+#ifdef __cplusplus\r
+}\r
+#endif\r
+\r
+#endif /* __STM32F10x_SDIO_H */\r
+/**\r
+ * @}\r
+ */\r
+\r
+/**\r
+ * @}\r
+ */\r
+\r
+/**\r
+ * @}\r
+ */\r
+\r
+/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/\r
projects / fw / stlink / blobdiff