Merge branch 'tmaster' into future

[fw/stlink] / example / blink / main.c

diff --git a/example/blink/main.c b/example/blink/main.c
index 929e3b9c1279762da8bbdd5e703c2ac1a2f0d825..0a38069be301c930f6751a393cf60196f0587237 100644 (file)
--- a/example/blink/main.c
+++ b/example/blink/main.c
@@ -5,62 +5,73 @@ typedef unsigned int uint32_t;
 
 /* hardware configuration */
 
-#define CONFIG_STM32L_DISCOVERY 1
-#define CONFIG_STM32VL_DISCOVERY 0
-
-
 #if CONFIG_STM32VL_DISCOVERY
 
-# define GPIOC 0x40011000 /* port C */
-# define GPIOC_CRH (GPIOC + 0x04) /* port configuration register high */
-# define GPIOC_ODR (GPIOC + 0x0c) /* port output data register */
+#define GPIOC 0x40011000 /* port C */
+#define GPIOC_CRH (GPIOC + 0x04) /* port configuration register high */
+#define LED_PORT_ODR (GPIOC + 0x0c) /* port output data register */
 
-# define LED_BLUE (1 << 8) /* port C, pin 8 */
-# define LED_GREEN (1 << 9) /* port C, pin 9 */
+#define LED_BLUE (1 << 8) /* port C, pin 8 */
+#define LED_GREEN (1 << 9) /* port C, pin 9 */
+#define LED_ORANGE 0
+#define LED_RED 0
 
 static inline void setup_leds(void)
 {
   *(volatile uint32_t*)GPIOC_CRH = 0x44444411;
 }
 
-static inline void switch_leds_on(void)
-{
-  *(volatile uint32_t*)GPIOC_ODR = LED_BLUE | LED_GREEN;
-}
+#elif CONFIG_STM32L_DISCOVERY
 
-static inline void switch_leds_off(void)
+#define GPIOB 0x40020400 /* port B */
+#define GPIOB_MODER (GPIOB + 0x00) /* port mode register */
+#define LED_PORT_ODR (GPIOB + 0x14) /* port output data register */
+
+#define LED_BLUE (1 << 6) /* port B, pin 6 */
+#define LED_GREEN (1 << 7) /* port B, pin 7 */
+#define LED_ORANGE 0
+#define LED_RED 0
+
+static inline void setup_leds(void)
 {
-  *(volatile uint32_t*)GPIOC_ODR = 0;
+  /* configure port 6 and 7 as output */
+  *(volatile uint32_t*)GPIOB_MODER |= (1 << (7 * 2)) | (1 << (6 * 2));
 }
 
-#elif CONFIG_STM32L_DISCOVERY
+#elif CONFIG_STM32F4_DISCOVERY
 
-# define GPIOB 0x40020400 /* port B */
-# define GPIOB_MODER (GPIOB + 0x00) /* port mode register */
-# define GPIOB_ODR (GPIOB + 0x14) /* port output data register */
+#define GPIOD 0x40020C00 /* port D */
+#define GPIOD_MODER (GPIOD + 0x00) /* port mode register */
+#define LED_PORT_ODR (GPIOD + 0x14) /* port output data register */
 
-# define LED_BLUE (1 << 6) /* port B, pin 6 */
-# define LED_GREEN (1 << 7) /* port B, pin 7 */
+#define LED_GREEN (1 << 12) /* port D, pin 12 */
+#define LED_ORANGE (1 << 13) /* port D, pin 13 */
+#define LED_RED (1 << 14) /* port D, pin 14 */
+#define LED_BLUE (1 << 15) /* port D, pin 15 */
 
+void _tmain(void) {
+       main();
+}
 static inline void setup_leds(void)
 {
-  /* configure port 6 and 7 as output */
-  *(volatile uint32_t*)GPIOB_MODER |= (1 << (7 * 2)) | (1 << (6 * 2));
+  *(volatile uint32_t*)GPIOD_MODER |= (1 << (12 * 2)) | (1 << (13 * 2)) |
+       (1 << (13 * 2)) | (1 << (14 * 2)) | (1 << (15 * 2));
 }
 
+#else
+#error "Architecture must be defined!"
+#endif /* otherwise, error */
+
 static inline void switch_leds_on(void)
 {
-  *(volatile uint32_t*)GPIOB_ODR = LED_BLUE | LED_GREEN;
+  *(volatile uint32_t*)LED_PORT_ODR = LED_BLUE | LED_GREEN | LED_ORANGE | LED_RED;
 }
 
 static inline void switch_leds_off(void)
 {
-  *(volatile uint32_t*)GPIOB_ODR = 0;
+  *(volatile uint32_t*)LED_PORT_ODR = 0;
 }
 
-#endif /* otherwise, error */
-
-
 #define delay()                                                \
 do {                                                   \
   register unsigned int i;                             \
@@ -68,7 +79,8 @@ do {                                                  \
     __asm__ __volatile__ ("nop\n\t":::"memory");       \
 } while (0)
 
-static void __attribute__((naked)) __attribute__((used)) main(void)
+/* static void __attribute__((naked)) __attribute__((used)) main(void) */
+void main(void)
 {
   setup_leds();