-# Makefile.in generated by automake 1.10 from Makefile.am.
+# Makefile.in generated by automake 1.11 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006 Free Software Foundation, Inc.
+# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation,
+# Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# Makefile for sample configuration files
+# vim:ft=automake
+# Copyright (c) 2005-2008 Zmanda Inc. All Rights Reserved.
+#
+# This library is free software; you can redistribute it and/or modify it
+# under the terms of the GNU Lesser General Public License version 2.1 as
+# published by the Free Software Foundation.
+#
+# This library is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+# or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public
+# License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public License
+# along with this library; if not, write to the Free Software Foundation,
+# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+#
+# Contact information: Zmanda Inc., 465 S Mathlida Ave, Suite 300
+# Sunnyvale, CA 94086, USA, or: http://www.zmanda.com
+
+# simple include file to pre-define variables which are then +='d by other
+# scripts in this directory.
+
# vim:ft=automake
#
# Adjust post-install permissions settings. This rule works off two
# INSTALLPERMS_exec = \
# dest=$(sbindir) chown=amanda chmod= \
# foo bar \
-# chmod=u+s,o-rwx \
+# chmod=07450 \
# bing
# dest=$(libexecdir) chmod= \
# $(libexec_PROGRAMS)
#
# This whole operation is not required when making builds for packaging,
# and can be disabled with --disable-installperms, via the WANT_INSTALLPERMS
-# AM_CONDITIONAL.
+# AM_CONDITIONAL. When disabled, the file 'installperms.sh' in the top-level
+# build directory is populated with a format suitable for shell interpretation,
+# with lines like this:
+# installperm "amanda:disk" "04750" "/usr/local/sbin/bing"
+# the arguments being, respectively, owner:group, mode, and filename. There will
+# be exactly one line for each file which has specific permissions. The intention
+# is that this file be used by packaging scripts to set correct permissions at install
+# time. Note that files which have no special permissions requirements do not appear
+# in this file at all, due to limitations of Automake.
VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
$(dist_template_DATA) $(srcdir)/Makefile.am \
$(srcdir)/Makefile.in $(srcdir)/amanda-client.conf.in \
$(srcdir)/amanda.conf.in $(srcdir)/chg-mcutil.conf.in \
- $(top_srcdir)/config/automake/installperms.am
+ $(srcdir)/inetd.conf.amandaclient.in \
+ $(srcdir)/inetd.conf.amandaserver.in \
+ $(srcdir)/xinetd.amandaclient.in \
+ $(srcdir)/xinetd.amandaserver.in \
+ $(top_srcdir)/config/automake/installperms.am \
+ $(top_srcdir)/config/automake/vars.am
+@WANT_INSTALLPERMS_FALSE@am__append_1 = $(installperms_sh)
subdir = example
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = \
$(top_srcdir)/config/macro-archive/ac_define_dir.m4 \
+ $(top_srcdir)/config/macro-archive/ac_perl_module_version.m4 \
$(top_srcdir)/config/macro-archive/ac_prog_perl_version.m4 \
$(top_srcdir)/config/macro-archive/ac_prog_swig.m4 \
$(top_srcdir)/config/macro-archive/ax_compare_version.m4 \
$(top_srcdir)/config/amanda/libs.m4 \
$(top_srcdir)/config/amanda/net.m4 \
$(top_srcdir)/config/amanda/progs.m4 \
+ $(top_srcdir)/config/amanda/ps.m4 \
$(top_srcdir)/config/amanda/readdir.m4 \
$(top_srcdir)/config/amanda/readline.m4 \
$(top_srcdir)/config/amanda/rsh-security.m4 \
$(top_srcdir)/config/amanda/s3-device.m4 \
$(top_srcdir)/config/amanda/shmem.m4 \
+ $(top_srcdir)/config/amanda/socklen_t_equiv.m4 \
$(top_srcdir)/config/amanda/ssh-security.m4 \
$(top_srcdir)/config/amanda/summary.m4 \
$(top_srcdir)/config/amanda/swig.m4 \
$(top_srcdir)/config/gnulib/float_h.m4 \
$(top_srcdir)/config/gnulib/fsusage.m4 \
$(top_srcdir)/config/gnulib/getaddrinfo.m4 \
+ $(top_srcdir)/config/gnulib/getopt.m4 \
$(top_srcdir)/config/gnulib/gettimeofday.m4 \
+ $(top_srcdir)/config/gnulib/gnulib-common.m4 \
$(top_srcdir)/config/gnulib/gnulib-comp.m4 \
$(top_srcdir)/config/gnulib/include_next.m4 \
$(top_srcdir)/config/gnulib/inet_ntop.m4 \
$(top_srcdir)/config/gnulib/sys_stat_h.m4 \
$(top_srcdir)/config/gnulib/sys_time_h.m4 \
$(top_srcdir)/config/gnulib/tempname.m4 \
- $(top_srcdir)/config/gnulib/ulonglong.m4 \
$(top_srcdir)/config/gnulib/unistd_h.m4 \
$(top_srcdir)/config/gnulib/vasnprintf.m4 \
$(top_srcdir)/config/gnulib/visibility.m4 \
$(top_srcdir)/config/gettext-macros/lib-ld.m4 \
$(top_srcdir)/config/gettext-macros/lib-link.m4 \
$(top_srcdir)/config/gettext-macros/lib-prefix.m4 \
- $(top_srcdir)/config/gettext-macros/longlong.m4 \
$(top_srcdir)/config/gettext-macros/nls.m4 \
$(top_srcdir)/config/gettext-macros/po.m4 \
$(top_srcdir)/config/gettext-macros/progtest.m4 \
$(ACLOCAL_M4)
mkinstalldirs = $(SHELL) $(top_srcdir)/config/mkinstalldirs
CONFIG_HEADER = $(top_builddir)/config/config.h
-CONFIG_CLEAN_FILES = amanda-client.conf amanda.conf chg-mcutil.conf
+CONFIG_CLEAN_FILES = amanda-client.conf amanda.conf \
+ xinetd.amandaclient xinetd.amandaserver \
+ inetd.conf.amandaclient inetd.conf.amandaserver \
+ chg-mcutil.conf
+CONFIG_CLEAN_VPATH_FILES =
SOURCES =
DIST_SOURCES =
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
$(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
*) f=$$p;; \
esac;
-am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+ srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+ for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+ for p in $$list; do echo "$$p $$p"; done | \
+ sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+ $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+ if (++n[$$2] == $(am__install_max)) \
+ { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+ END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+ sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+ sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
am__installdirs = "$(DESTDIR)$(exampledir)" "$(DESTDIR)$(lbltempldir)" \
"$(DESTDIR)$(templatedir)"
-dist_exampleDATA_INSTALL = $(INSTALL_DATA)
-dist_lbltemplDATA_INSTALL = $(INSTALL_DATA)
-dist_templateDATA_INSTALL = $(INSTALL_DATA)
DATA = $(dist_example_DATA) $(dist_lbltempl_DATA) \
$(dist_template_DATA)
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = @ACLOCAL@
+AIX_BACKUP = @AIX_BACKUP@
ALLOCA = @ALLOCA@
ALLOCA_H = @ALLOCA_H@
AMANDA_DBGDIR = @AMANDA_DBGDIR@
AMPLOT_CAT_PACK = @AMPLOT_CAT_PACK@
AMPLOT_COMPRESS = @AMPLOT_COMPRESS@
AMTAR = @AMTAR@
+APPLICATION_DIR = @APPLICATION_DIR@
AR = @AR@
ARPA_INET_H = @ARPA_INET_H@
+ASSERTIONS = @ASSERTIONS@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
BITSIZEOF_SIZE_T = @BITSIZEOF_SIZE_T@
BITSIZEOF_WCHAR_T = @BITSIZEOF_WCHAR_T@
BITSIZEOF_WINT_T = @BITSIZEOF_WINT_T@
+BSDTCP_SECURITY = @BSDTCP_SECURITY@
+BSDUDP_SECURITY = @BSDUDP_SECURITY@
+BSD_SECURITY = @BSD_SECURITY@
CAT = @CAT@
CC = @CC@
CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CFLAG_VISIBILITY = @CFLAG_VISIBILITY@
+CHECK_USERID = @CHECK_USERID@
CHIO = @CHIO@
CHS = @CHS@
+CLIENT_HOST_INSTANCE = @CLIENT_HOST_INSTANCE@
+CLIENT_HOST_KEY_FILE = @CLIENT_HOST_KEY_FILE@
+CLIENT_HOST_PRINCIPAL = @CLIENT_HOST_PRINCIPAL@
CLIENT_LOGIN = @CLIENT_LOGIN@
CLIENT_SCRIPTS_OPT = @CLIENT_SCRIPTS_OPT@
COMPRESS = @COMPRESS@
+COMPRESS_BEST_OPT = @COMPRESS_BEST_OPT@
+COMPRESS_FAST_OPT = @COMPRESS_FAST_OPT@
+COMPRESS_PATH = @COMPRESS_PATH@
+COMPRESS_SUFFIX = @COMPRESS_SUFFIX@
+CONFIG_CLOBBER_MY_CONFIG = @CONFIG_CLOBBER_MY_CONFIG@
CONFIG_DIR = @CONFIG_DIR@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
DEFAULT_AMANDATES_FILE = @DEFAULT_AMANDATES_FILE@
DEFAULT_CHANGER_DEVICE = @DEFAULT_CHANGER_DEVICE@
DEFAULT_CONFIG = @DEFAULT_CONFIG@
+DEFAULT_MAILER = @DEFAULT_MAILER@
DEFAULT_SERVER = @DEFAULT_SERVER@
DEFAULT_TAPE_DEVICE = @DEFAULT_TAPE_DEVICE@
DEFAULT_TAPE_SERVER = @DEFAULT_TAPE_SERVER@
DEPDIR = @DEPDIR@
DOC_BUILD_DATE = @DOC_BUILD_DATE@
DUMP = @DUMP@
-DUMPER_DIR = @DUMPER_DIR@
+DUMP_RETURNS_1 = @DUMP_RETURNS_1@
ECHO = @ECHO@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
FFLAGS = @FFLAGS@
FLOAT_H = @FLOAT_H@
GETCONF = @GETCONF@
+GETOPT_H = @GETOPT_H@
GETTEXT = @GETTEXT@
GLIB_CFLAGS = @GLIB_CFLAGS@
GLIB_GENMARSHAL = @GLIB_GENMARSHAL@
GNULIB_CALLOC_POSIX = @GNULIB_CALLOC_POSIX@
GNULIB_CHOWN = @GNULIB_CHOWN@
GNULIB_DUP2 = @GNULIB_DUP2@
+GNULIB_ENVIRON = @GNULIB_ENVIRON@
GNULIB_FCHDIR = @GNULIB_FCHDIR@
GNULIB_FFLUSH = @GNULIB_FFLUSH@
+GNULIB_FOPEN = @GNULIB_FOPEN@
GNULIB_FPRINTF_POSIX = @GNULIB_FPRINTF_POSIX@
+GNULIB_FREOPEN = @GNULIB_FREOPEN@
GNULIB_FSEEK = @GNULIB_FSEEK@
GNULIB_FSEEKO = @GNULIB_FSEEKO@
GNULIB_FTELL = @GNULIB_FTELL@
GNULIB_GETDELIM = @GNULIB_GETDELIM@
GNULIB_GETLINE = @GNULIB_GETLINE@
GNULIB_GETLOGIN_R = @GNULIB_GETLOGIN_R@
+GNULIB_GETPAGESIZE = @GNULIB_GETPAGESIZE@
GNULIB_GETSUBOPT = @GNULIB_GETSUBOPT@
GNULIB_LCHOWN = @GNULIB_LCHOWN@
GNULIB_LSEEK = @GNULIB_LSEEK@
GNULIB_MKDTEMP = @GNULIB_MKDTEMP@
GNULIB_MKSTEMP = @GNULIB_MKSTEMP@
GNULIB_PRINTF_POSIX = @GNULIB_PRINTF_POSIX@
+GNULIB_PUTENV = @GNULIB_PUTENV@
GNULIB_READLINK = @GNULIB_READLINK@
GNULIB_REALLOC_POSIX = @GNULIB_REALLOC_POSIX@
+GNULIB_SETENV = @GNULIB_SETENV@
GNULIB_SLEEP = @GNULIB_SLEEP@
GNULIB_SNPRINTF = @GNULIB_SNPRINTF@
GNULIB_SPRINTF_POSIX = @GNULIB_SPRINTF_POSIX@
GNULIB_STRCASESTR = @GNULIB_STRCASESTR@
GNULIB_STRCHRNUL = @GNULIB_STRCHRNUL@
GNULIB_STRDUP = @GNULIB_STRDUP@
+GNULIB_STRERROR = @GNULIB_STRERROR@
GNULIB_STRNDUP = @GNULIB_STRNDUP@
GNULIB_STRNLEN = @GNULIB_STRNLEN@
GNULIB_STRPBRK = @GNULIB_STRPBRK@
GNULIB_STRSEP = @GNULIB_STRSEP@
+GNULIB_STRSIGNAL = @GNULIB_STRSIGNAL@
+GNULIB_STRSTR = @GNULIB_STRSTR@
GNULIB_STRTOK_R = @GNULIB_STRTOK_R@
+GNULIB_UNSETENV = @GNULIB_UNSETENV@
GNULIB_VASPRINTF = @GNULIB_VASPRINTF@
GNULIB_VFPRINTF_POSIX = @GNULIB_VFPRINTF_POSIX@
GNULIB_VPRINTF_POSIX = @GNULIB_VPRINTF_POSIX@
GREP = @GREP@
GZIP = @GZIP@
HAVE_CALLOC_POSIX = @HAVE_CALLOC_POSIX@
+HAVE_DECL_ENVIRON = @HAVE_DECL_ENVIRON@
HAVE_DECL_GETDELIM = @HAVE_DECL_GETDELIM@
HAVE_DECL_GETLINE = @HAVE_DECL_GETLINE@
HAVE_DECL_GETLOGIN_R = @HAVE_DECL_GETLOGIN_R@
HAVE_DECL_MKDIR = @HAVE_DECL_MKDIR@
HAVE_DECL_SNPRINTF = @HAVE_DECL_SNPRINTF@
HAVE_DECL_STRDUP = @HAVE_DECL_STRDUP@
-HAVE_DECL_STRNCASECMP = @HAVE_DECL_STRNCASECMP@
+HAVE_DECL_STRERROR = @HAVE_DECL_STRERROR@
HAVE_DECL_STRNDUP = @HAVE_DECL_STRNDUP@
HAVE_DECL_STRNLEN = @HAVE_DECL_STRNLEN@
+HAVE_DECL_STRSIGNAL = @HAVE_DECL_STRSIGNAL@
HAVE_DECL_STRTOK_R = @HAVE_DECL_STRTOK_R@
HAVE_DECL_VSNPRINTF = @HAVE_DECL_VSNPRINTF@
HAVE_DECL_WCWIDTH = @HAVE_DECL_WCWIDTH@
HAVE_FSEEKO = @HAVE_FSEEKO@
HAVE_FTELLO = @HAVE_FTELLO@
HAVE_FTRUNCATE = @HAVE_FTRUNCATE@
+HAVE_GETPAGESIZE = @HAVE_GETPAGESIZE@
HAVE_GETSUBOPT = @HAVE_GETSUBOPT@
+HAVE_GZIP = @HAVE_GZIP@
HAVE_INTTYPES_H = @HAVE_INTTYPES_H@
HAVE_IO_H = @HAVE_IO_H@
HAVE_LONG_LONG_INT = @HAVE_LONG_LONG_INT@
HAVE_MEMPCPY = @HAVE_MEMPCPY@
HAVE_MKDTEMP = @HAVE_MKDTEMP@
HAVE_NETINET_IN_H = @HAVE_NETINET_IN_H@
+HAVE_OS_H = @HAVE_OS_H@
HAVE_READLINK = @HAVE_READLINK@
HAVE_REALLOC_POSIX = @HAVE_REALLOC_POSIX@
+HAVE_SETENV = @HAVE_SETENV@
HAVE_SIGNED_SIG_ATOMIC_T = @HAVE_SIGNED_SIG_ATOMIC_T@
HAVE_SIGNED_WCHAR_T = @HAVE_SIGNED_WCHAR_T@
HAVE_SIGNED_WINT_T = @HAVE_SIGNED_WINT_T@
HAVE_STDINT_H = @HAVE_STDINT_H@
HAVE_STPCPY = @HAVE_STPCPY@
HAVE_STPNCPY = @HAVE_STPNCPY@
-HAVE_STRCASECMP = @HAVE_STRCASECMP@
HAVE_STRCASESTR = @HAVE_STRCASESTR@
HAVE_STRCHRNUL = @HAVE_STRCHRNUL@
HAVE_STRNDUP = @HAVE_STRNDUP@
HAVE_STRUCT_TIMEVAL = @HAVE_STRUCT_TIMEVAL@
HAVE_SYS_BITYPES_H = @HAVE_SYS_BITYPES_H@
HAVE_SYS_INTTYPES_H = @HAVE_SYS_INTTYPES_H@
+HAVE_SYS_PARAM_H = @HAVE_SYS_PARAM_H@
HAVE_SYS_SOCKET_H = @HAVE_SYS_SOCKET_H@
HAVE_SYS_TIME_H = @HAVE_SYS_TIME_H@
HAVE_SYS_TYPES_H = @HAVE_SYS_TYPES_H@
HAVE_UNISTD_H = @HAVE_UNISTD_H@
+HAVE_UNSETENV = @HAVE_UNSETENV@
HAVE_UNSIGNED_LONG_LONG_INT = @HAVE_UNSIGNED_LONG_LONG_INT@
HAVE_VASPRINTF = @HAVE_VASPRINTF@
HAVE_VISIBILITY = @HAVE_VISIBILITY@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
INTLLIBS = @INTLLIBS@
INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
+KRB4_SECURITY = @KRB4_SECURITY@
+KRB5_SECURITY = @KRB5_SECURITY@
LDFLAGS = @LDFLAGS@
LEX = @LEX@
LEXLIB = @LEXLIB@
LIBTOOL = @LIBTOOL@
LIBTOOL_DEPS = @LIBTOOL_DEPS@
LN_S = @LN_S@
+LOCKING = @LOCKING@
+LOW_TCPPORTRANGE = @LOW_TCPPORTRANGE@
LTLIBICONV = @LTLIBICONV@
LTLIBINTL = @LTLIBINTL@
LTLIBMULTITHREAD = @LTLIBMULTITHREAD@
LTLIBTHREAD = @LTLIBTHREAD@
MAILER = @MAILER@
MAKEINFO = @MAKEINFO@
-MAXTAPEBLOCKSIZE = @MAXTAPEBLOCKSIZE@
MCUTIL = @MCUTIL@
MKDIR_P = @MKDIR_P@
MSGFMT = @MSGFMT@
PKG_CONFIG = @PKG_CONFIG@
POSUB = @POSUB@
PRINT = @PRINT@
+PS = @PS@
+PS_ARGUMENT = @PS_ARGUMENT@
PTRDIFF_T_SUFFIX = @PTRDIFF_T_SUFFIX@
RANLIB = @RANLIB@
READLINE_LIBS = @READLINE_LIBS@
REPLACE_CHOWN = @REPLACE_CHOWN@
REPLACE_FCHDIR = @REPLACE_FCHDIR@
REPLACE_FFLUSH = @REPLACE_FFLUSH@
+REPLACE_FOPEN = @REPLACE_FOPEN@
REPLACE_FPRINTF = @REPLACE_FPRINTF@
+REPLACE_FREOPEN = @REPLACE_FREOPEN@
REPLACE_FSEEK = @REPLACE_FSEEK@
REPLACE_FSEEKO = @REPLACE_FSEEKO@
REPLACE_FTELL = @REPLACE_FTELL@
REPLACE_FTELLO = @REPLACE_FTELLO@
REPLACE_GETCWD = @REPLACE_GETCWD@
REPLACE_GETLINE = @REPLACE_GETLINE@
+REPLACE_GETPAGESIZE = @REPLACE_GETPAGESIZE@
REPLACE_GETTIMEOFDAY = @REPLACE_GETTIMEOFDAY@
REPLACE_LCHOWN = @REPLACE_LCHOWN@
REPLACE_LSEEK = @REPLACE_LSEEK@
+REPLACE_MEMMEM = @REPLACE_MEMMEM@
REPLACE_MKSTEMP = @REPLACE_MKSTEMP@
REPLACE_PRINTF = @REPLACE_PRINTF@
+REPLACE_PUTENV = @REPLACE_PUTENV@
REPLACE_SNPRINTF = @REPLACE_SNPRINTF@
REPLACE_SPRINTF = @REPLACE_SPRINTF@
+REPLACE_STRCASESTR = @REPLACE_STRCASESTR@
+REPLACE_STRERROR = @REPLACE_STRERROR@
+REPLACE_STRSIGNAL = @REPLACE_STRSIGNAL@
+REPLACE_STRSTR = @REPLACE_STRSTR@
REPLACE_VASPRINTF = @REPLACE_VASPRINTF@
REPLACE_VFPRINTF = @REPLACE_VFPRINTF@
REPLACE_VPRINTF = @REPLACE_VPRINTF@
REPLACE_VSPRINTF = @REPLACE_VSPRINTF@
REPLACE_WCWIDTH = @REPLACE_WCWIDTH@
RESTORE = @RESTORE@
+RSH_SECURITY = @RSH_SECURITY@
SAMBA_CLIENT = @SAMBA_CLIENT@
+SERVER_HOST_INSTANCE = @SERVER_HOST_INSTANCE@
+SERVER_HOST_KEY_FILE = @SERVER_HOST_KEY_FILE@
+SERVER_HOST_PRINCIPAL = @SERVER_HOST_PRINCIPAL@
SERVICE_SUFFIX = @SERVICE_SUFFIX@
SETUID_GROUP = @SETUID_GROUP@
SET_MAKE = @SET_MAKE@
SNAPSHOT_STAMP = @SNAPSHOT_STAMP@
SORT = @SORT@
SSH = @SSH@
+SSH_SECURITY = @SSH_SECURITY@
STDBOOL_H = @STDBOOL_H@
STDINT_H = @STDINT_H@
STRIP = @STRIP@
SYS_SOCKET_H = @SYS_SOCKET_H@
SYS_STAT_H = @SYS_STAT_H@
SYS_TIME_H = @SYS_TIME_H@
+TCPPORTRANGE = @TCPPORTRANGE@
+TICKET_LIFETIME = @TICKET_LIFETIME@
+UDPPORTRANGE = @UDPPORTRANGE@
+UNCOMPRESS_OPT = @UNCOMPRESS_OPT@
+UNCOMPRESS_PATH = @UNCOMPRESS_PATH@
+USE_AMANDAHOSTS = @USE_AMANDAHOSTS@
USE_NLS = @USE_NLS@
+USE_RUNDUMP = @USE_RUNDUMP@
USE_VERSION_SUFFIXES = @USE_VERSION_SUFFIXES@
VDUMP = @VDUMP@
VERSION = @VERSION@
VERSION_MINOR = @VERSION_MINOR@
VERSION_PATCH = @VERSION_PATCH@
VERSION_SUFFIX = @VERSION_SUFFIX@
+VOID_UNSETENV = @VOID_UNSETENV@
VRESTORE = @VRESTORE@
VXDUMP = @VXDUMP@
VXRESTORE = @VXRESTORE@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
+amdatadir = @amdatadir@
amincludedir = @amincludedir@
amlibdir = @amlibdir@
amlibexecdir = @amlibexecdir@
exec_prefix = @exec_prefix@
gl_LIBOBJS = @gl_LIBOBJS@
gl_LTLIBOBJS = @gl_LTLIBOBJS@
+gltests_LIBOBJS = @gltests_LIBOBJS@
+gltests_LTLIBOBJS = @gltests_LTLIBOBJS@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
target_cpu = @target_cpu@
target_os = @target_os@
target_vendor = @target_vendor@
+top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
+SUFFIXES =
+EXTRA_DIST = chg-multi.conf chg-scsi.conf config.site disklist \
+ chg-mcutil.conf
+BUILT_SOURCES =
+MOSTLYCLEANFILES =
+CLEANFILES =
+DISTCLEANFILES = $(am__append_1)
+MAINTAINERCLEANFILES =
# sed expression to strip leading directories from a filename; this converts e.g.,
# src/foo/bar.so to bar.so.
strip_leading_dirs = s|^.*/||
-amanda_dir = $(localstatedir)/lib/amanda
+@WANT_INSTALLPERMS_FALSE@do_file = pa="$$dest"/`echo "$$cmd"|sed '$(strip_leading_dirs)'|sed '$(transform)'`; \
+@WANT_INSTALLPERMS_FALSE@ echo "installperm \"$$chown\" \"$$chmod\" \"$$pa\"" >> "$(installperms_sh)"
+
+
+# define a snippet of the scripts below to either perform a chown/chmod operation,
+# or record that operation in the logfile. On entry to the snippet, $$dest is the
+# destination directory, $$cmd is the srcdir-relative pathname of the target file,
+# $$chown is the ownership, and $$chmod is the permission pattern.
+@WANT_INSTALLPERMS_TRUE@do_file = pa="$(DESTDIR)$$dest"/`echo "$$cmd"|sed '$(strip_leading_dirs)'|sed '$(transform)'`; \
+@WANT_INSTALLPERMS_TRUE@ if test -n "$$chown"; then \
+@WANT_INSTALLPERMS_TRUE@ echo chown "$$chown" "$$pa"; \
+@WANT_INSTALLPERMS_TRUE@ chown "$$chown" "$$pa" || exit 1; \
+@WANT_INSTALLPERMS_TRUE@ fi; \
+@WANT_INSTALLPERMS_TRUE@ if test -n "$$chmod"; then \
+@WANT_INSTALLPERMS_TRUE@ echo chmod "$$chmod" "$$pa"; \
+@WANT_INSTALLPERMS_TRUE@ chmod "$$chmod" "$$pa" || exit 1; \
+@WANT_INSTALLPERMS_TRUE@ fi
+
+@WANT_INSTALLPERMS_FALSE@installperms_sh = "$(top_builddir)/installperms.sh"
+amanda_dir = $(amdatadir)
templatedir = $(amanda_dir)/template.d
exampledir = $(amanda_dir)/example
lbltempldir = $(amanda_dir)/example/label-templates
-EXTRA_DIST = chg-multi.conf \
- chg-scsi.conf \
- config.site \
- disklist \
- chg-mcutil.conf
-
dist_template_DATA = template.d/advanced.conf \
template.d/amanda-harddisk.conf \
template.d/amanda-single-tape.conf \
dist_example_DATA = amanda.conf \
amanda-client.conf \
inetd.conf.amandaclient \
+ inetd.conf.amandaserver \
xinetd.amandaclient \
xinetd.amandaserver
dest=$(exampledir) $(dist_example_DATA) \
dest=$(libtempldir) $(dist_libtempl_DATA)
-all: all-am
+all: $(BUILT_SOURCES)
+ $(MAKE) $(AM_MAKEFLAGS) all-am
.SUFFIXES:
-$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(top_srcdir)/config/automake/installperms.am $(am__configure_deps)
+.SUFFIXES:
+$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(top_srcdir)/config/automake/vars.am $(top_srcdir)/config/automake/installperms.am $(am__configure_deps)
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
- cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
- && exit 0; \
+ ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+ && { if test -f $@; then exit 0; else break; fi; }; \
exit 1;; \
esac; \
done; \
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu example/Makefile'; \
- cd $(top_srcdir) && \
- $(AUTOMAKE) --gnu example/Makefile
+ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu example/Makefile'; \
+ $(am__cd) $(top_srcdir) && \
+ $(AUTOMAKE) --gnu example/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): $(am__aclocal_m4_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
amanda-client.conf: $(top_builddir)/config.status $(srcdir)/amanda-client.conf.in
cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
amanda.conf: $(top_builddir)/config.status $(srcdir)/amanda.conf.in
cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
+xinetd.amandaclient: $(top_builddir)/config.status $(srcdir)/xinetd.amandaclient.in
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
+xinetd.amandaserver: $(top_builddir)/config.status $(srcdir)/xinetd.amandaserver.in
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
+inetd.conf.amandaclient: $(top_builddir)/config.status $(srcdir)/inetd.conf.amandaclient.in
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
+inetd.conf.amandaserver: $(top_builddir)/config.status $(srcdir)/inetd.conf.amandaserver.in
+ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
chg-mcutil.conf: $(top_builddir)/config.status $(srcdir)/chg-mcutil.conf.in
cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@
install-dist_exampleDATA: $(dist_example_DATA)
@$(NORMAL_INSTALL)
test -z "$(exampledir)" || $(MKDIR_P) "$(DESTDIR)$(exampledir)"
- @list='$(dist_example_DATA)'; for p in $$list; do \
+ @list='$(dist_example_DATA)'; test -n "$(exampledir)" || list=; \
+ for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- f=$(am__strip_dir) \
- echo " $(dist_exampleDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(exampledir)/$$f'"; \
- $(dist_exampleDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(exampledir)/$$f"; \
+ echo "$$d$$p"; \
+ done | $(am__base_list) | \
+ while read files; do \
+ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(exampledir)'"; \
+ $(INSTALL_DATA) $$files "$(DESTDIR)$(exampledir)" || exit $$?; \
done
uninstall-dist_exampleDATA:
@$(NORMAL_UNINSTALL)
- @list='$(dist_example_DATA)'; for p in $$list; do \
- f=$(am__strip_dir) \
- echo " rm -f '$(DESTDIR)$(exampledir)/$$f'"; \
- rm -f "$(DESTDIR)$(exampledir)/$$f"; \
- done
+ @list='$(dist_example_DATA)'; test -n "$(exampledir)" || list=; \
+ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+ test -n "$$files" || exit 0; \
+ echo " ( cd '$(DESTDIR)$(exampledir)' && rm -f" $$files ")"; \
+ cd "$(DESTDIR)$(exampledir)" && rm -f $$files
install-dist_lbltemplDATA: $(dist_lbltempl_DATA)
@$(NORMAL_INSTALL)
test -z "$(lbltempldir)" || $(MKDIR_P) "$(DESTDIR)$(lbltempldir)"
- @list='$(dist_lbltempl_DATA)'; for p in $$list; do \
+ @list='$(dist_lbltempl_DATA)'; test -n "$(lbltempldir)" || list=; \
+ for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- f=$(am__strip_dir) \
- echo " $(dist_lbltemplDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(lbltempldir)/$$f'"; \
- $(dist_lbltemplDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(lbltempldir)/$$f"; \
+ echo "$$d$$p"; \
+ done | $(am__base_list) | \
+ while read files; do \
+ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(lbltempldir)'"; \
+ $(INSTALL_DATA) $$files "$(DESTDIR)$(lbltempldir)" || exit $$?; \
done
uninstall-dist_lbltemplDATA:
@$(NORMAL_UNINSTALL)
- @list='$(dist_lbltempl_DATA)'; for p in $$list; do \
- f=$(am__strip_dir) \
- echo " rm -f '$(DESTDIR)$(lbltempldir)/$$f'"; \
- rm -f "$(DESTDIR)$(lbltempldir)/$$f"; \
- done
+ @list='$(dist_lbltempl_DATA)'; test -n "$(lbltempldir)" || list=; \
+ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+ test -n "$$files" || exit 0; \
+ echo " ( cd '$(DESTDIR)$(lbltempldir)' && rm -f" $$files ")"; \
+ cd "$(DESTDIR)$(lbltempldir)" && rm -f $$files
install-dist_templateDATA: $(dist_template_DATA)
@$(NORMAL_INSTALL)
test -z "$(templatedir)" || $(MKDIR_P) "$(DESTDIR)$(templatedir)"
- @list='$(dist_template_DATA)'; for p in $$list; do \
+ @list='$(dist_template_DATA)'; test -n "$(templatedir)" || list=; \
+ for p in $$list; do \
if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
- f=$(am__strip_dir) \
- echo " $(dist_templateDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(templatedir)/$$f'"; \
- $(dist_templateDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(templatedir)/$$f"; \
+ echo "$$d$$p"; \
+ done | $(am__base_list) | \
+ while read files; do \
+ echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(templatedir)'"; \
+ $(INSTALL_DATA) $$files "$(DESTDIR)$(templatedir)" || exit $$?; \
done
uninstall-dist_templateDATA:
@$(NORMAL_UNINSTALL)
- @list='$(dist_template_DATA)'; for p in $$list; do \
- f=$(am__strip_dir) \
- echo " rm -f '$(DESTDIR)$(templatedir)/$$f'"; \
- rm -f "$(DESTDIR)$(templatedir)/$$f"; \
- done
+ @list='$(dist_template_DATA)'; test -n "$(templatedir)" || list=; \
+ files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+ test -n "$$files" || exit 0; \
+ echo " ( cd '$(DESTDIR)$(templatedir)' && rm -f" $$files ")"; \
+ cd "$(DESTDIR)$(templatedir)" && rm -f $$files
tags: TAGS
TAGS:
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
if test -d $$d/$$file; then \
dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+ if test -d "$(distdir)/$$file"; then \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+ fi; \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
+ cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+ find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
- cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
+ cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
else \
- test -f $(distdir)/$$file \
- || cp -p $$d/$$file $(distdir)/$$file \
+ test -f "$(distdir)/$$file" \
+ || cp -p $$d/$$file "$(distdir)/$$file" \
|| exit 1; \
fi; \
done
check-am: all-am
-check: check-am
+check: $(BUILT_SOURCES)
+ $(MAKE) $(AM_MAKEFLAGS) check-am
all-am: Makefile $(DATA)
installdirs:
for dir in "$(DESTDIR)$(exampledir)" "$(DESTDIR)$(lbltempldir)" "$(DESTDIR)$(templatedir)"; do \
test -z "$$dir" || $(MKDIR_P) "$$dir"; \
done
-install: install-am
+install: $(BUILT_SOURCES)
+ $(MAKE) $(AM_MAKEFLAGS) install-am
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am
`test -z '$(STRIP)' || \
echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:
+ -test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES)
clean-generic:
+ -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
distclean-generic:
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+ -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+ -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@echo "it deletes files that may require special tools to rebuild."
-@WANT_INSTALLPERMS_FALSE@install-exec-hook:
-@WANT_INSTALLPERMS_FALSE@install-data-hook:
+ -test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
+ -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
clean: clean-am
clean-am: clean-generic clean-libtool mostlyclean-am
html: html-am
+html-am:
+
info: info-am
info-am:
install-dist_templateDATA
@$(NORMAL_INSTALL)
$(MAKE) $(AM_MAKEFLAGS) install-data-hook
-
install-dvi: install-dvi-am
+install-dvi-am:
+
install-exec-am:
@$(NORMAL_INSTALL)
$(MAKE) $(AM_MAKEFLAGS) install-exec-hook
-
install-html: install-html-am
+install-html-am:
+
install-info: install-info-am
+install-info-am:
+
install-man:
install-pdf: install-pdf-am
+install-pdf-am:
+
install-ps: install-ps-am
+install-ps-am:
+
installcheck-am:
maintainer-clean: maintainer-clean-am
uninstall-am: uninstall-dist_exampleDATA uninstall-dist_lbltemplDATA \
uninstall-dist_templateDATA
-.MAKE: install-am install-data-am install-exec-am install-strip
+.MAKE: all check install install-am install-data-am install-exec-am \
+ install-strip
.PHONY: all all-am check check-am clean clean-generic clean-libtool \
distclean distclean-generic distclean-libtool distdir dvi \
uninstall-dist_lbltemplDATA uninstall-dist_templateDATA
-@WANT_INSTALLPERMS_TRUE@installperms-exec:
-@WANT_INSTALLPERMS_TRUE@ @installperms="$(INSTALLPERMS_exec)"; \
-@WANT_INSTALLPERMS_TRUE@ test -n "$$installperms" && echo "Setting installation permissions on executables"; \
-@WANT_INSTALLPERMS_TRUE@ dest=; chown=; chmod=; \
-@WANT_INSTALLPERMS_TRUE@ for cmd in $$installperms; do \
-@WANT_INSTALLPERMS_TRUE@ case "$$cmd" in \
-@WANT_INSTALLPERMS_TRUE@ chown=amanda) \
-@WANT_INSTALLPERMS_TRUE@ echo " ($$cmd)"; chown="$(BINARY_OWNER):$(SETUID_GROUP)";; \
-@WANT_INSTALLPERMS_TRUE@ dest=*|chown=*|chmod=*) \
-@WANT_INSTALLPERMS_TRUE@ echo " ($$cmd)"; eval $$cmd;; \
-@WANT_INSTALLPERMS_TRUE@ *) pa="$(DESTDIR)$$dest"/`echo "$$cmd"|sed '$(strip_leading_dirs)'|sed '$(transform)'`; \
-@WANT_INSTALLPERMS_TRUE@ if test -n "$$chown"; then \
-@WANT_INSTALLPERMS_TRUE@ echo chown "$$chown" "$$pa"; \
-@WANT_INSTALLPERMS_TRUE@ chown "$$chown" "$$pa" || exit 1; \
-@WANT_INSTALLPERMS_TRUE@ fi; \
-@WANT_INSTALLPERMS_TRUE@ if test -n "$$chmod"; then \
-@WANT_INSTALLPERMS_TRUE@ echo chmod "$$chmod" "$$pa"; \
-@WANT_INSTALLPERMS_TRUE@ chmod "$$chmod" "$$pa" || exit 1; \
-@WANT_INSTALLPERMS_TRUE@ fi; \
-@WANT_INSTALLPERMS_TRUE@ esac; \
-@WANT_INSTALLPERMS_TRUE@ done
-
-@WANT_INSTALLPERMS_TRUE@installperms-data:
-@WANT_INSTALLPERMS_TRUE@ @installperms="$(INSTALLPERMS_data)"; \
-@WANT_INSTALLPERMS_TRUE@ test -n "$$installperms" && echo "Setting installation permissions on data"; \
-@WANT_INSTALLPERMS_TRUE@ dest=; chown=; chmod=; \
-@WANT_INSTALLPERMS_TRUE@ for cmd in $$installperms; do \
-@WANT_INSTALLPERMS_TRUE@ case "$$cmd" in \
-@WANT_INSTALLPERMS_TRUE@ chown=amanda) \
-@WANT_INSTALLPERMS_TRUE@ echo " ($$cmd)"; chown="$(BINARY_OWNER):$(SETUID_GROUP)";; \
-@WANT_INSTALLPERMS_TRUE@ dest=*|chown=*|chmod=*) \
-@WANT_INSTALLPERMS_TRUE@ echo " ($$cmd)"; eval $$cmd;; \
-@WANT_INSTALLPERMS_TRUE@ *) pa="$(DESTDIR)$$dest"/`echo "$$cmd"|sed '$(strip_leading_dirs)'|sed '$(transform)'`; \
-@WANT_INSTALLPERMS_TRUE@ if test -n "$$chown"; then \
-@WANT_INSTALLPERMS_TRUE@ echo chown "$$chown" "$$pa"; \
-@WANT_INSTALLPERMS_TRUE@ chown "$$chown" "$$pa" || exit 1; \
-@WANT_INSTALLPERMS_TRUE@ fi; \
-@WANT_INSTALLPERMS_TRUE@ if test -n "$$chmod"; then \
-@WANT_INSTALLPERMS_TRUE@ echo chmod "$$chmod" "$$pa"; \
-@WANT_INSTALLPERMS_TRUE@ chmod "$$chmod" "$$pa" || exit 1; \
-@WANT_INSTALLPERMS_TRUE@ fi; \
-@WANT_INSTALLPERMS_TRUE@ esac; \
-@WANT_INSTALLPERMS_TRUE@ done
-
-@WANT_INSTALLPERMS_TRUE@install-exec-hook: installperms-exec
-@WANT_INSTALLPERMS_TRUE@install-data-hook: installperms-data
+installperms-exec:
+ @installperms="$(INSTALLPERMS_exec)"; \
+ test -n "$$installperms" && echo "Setting installation permissions on executables"; \
+ dest=; chown=; chmod=; \
+ for cmd in $$installperms; do \
+ case "$$cmd" in \
+ chown=amanda) \
+ echo " ($$cmd)"; chown="$(BINARY_OWNER):$(SETUID_GROUP)";; \
+ dest=*|chown=*|chmod=*) \
+ echo " ($$cmd)"; eval $$cmd;; \
+ *) $(do_file) ;; \
+ esac; \
+ done
+
+installperms-data:
+ @installperms="$(INSTALLPERMS_data)"; \
+ dest=; chown=; chmod=; \
+ for cmd in $$installperms; do \
+ case "$$cmd" in \
+ chown=amanda) \
+ echo " ($$cmd)"; chown="$(BINARY_OWNER):$(SETUID_GROUP)";; \
+ dest=*|chown=*|chmod=*) \
+ echo " ($$cmd)"; eval $$cmd;; \
+ *) $(do_file) ;; \
+ esac; \
+ done
+
+install-exec-hook: installperms-exec
+install-data-hook: installperms-data
+
+# define a rule to initialize the installperms manifest file
+@WANT_INSTALLPERMS_TRUE@installperms-init:
+@WANT_INSTALLPERMS_FALSE@installperms-init:
+@WANT_INSTALLPERMS_FALSE@ rm -f "$(installperms_sh)"
+
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
projects / debian / amanda / blobdiff