--- /dev/null
+/**\r
+ ******************************************************************************\r
+ * @file stm32l_discovery_lcd.c\r
+ * @author Microcontroller Division\r
+ * @version V1.0.0\r
+ * @date Apri-2011\r
+ * @brief This file includes driver for the glass LCD Module mounted on \r
+ * STM32l discovery board MB963\r
+ ******************************************************************************\r
+ * @copy\r
+ *\r
+ * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS\r
+ * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE\r
+ * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY\r
+ * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING\r
+ * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE\r
+ * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.\r
+ *\r
+ * <h2><center>© COPYRIGHT 2011 STMicroelectronics</center></h2>\r
+ */ \r
+\r
+/* Includes ------------------------------------------------------------------*/\r
+#include "stm32l_discovery_lcd.h"\r
+#include "discover_board.h"\r
+#include "stm32l1xx_lcd.h"\r
+#include "stm32l1xx_gpio.h"\r
+#include "stm32l1xx_rcc.h"\r
+/* #include "main.h" */\r
+\r
+/* this variable can be used for accelerate the scrolling exit when push user button */\r
+volatile bool KeyPressed = FALSE; \r
+ \r
+/* LCD BAR status: We don't write directly in LCD RAM for save the bar setting */\r
+uint8_t t_bar[2]={0x0,0X0};\r
+ \r
+/* =========================================================================\r
+ LCD MAPPING\r
+ =========================================================================\r
+ A\r
+ _ ----------\r
+COL |_| |\ |J /|\r
+ F| H | K |B\r
+ _ | \ | / |\r
+COL |_| --G-- --M--\r
+ | /| \ |\r
+ E| Q | N |C\r
+ _ | / |P \| \r
+DP |_| ----------- \r
+ D \r
+\r
+ An LCD character coding is based on the following matrix:\r
+ { E , D , P , N }\r
+ { M , C , COL , DP}\r
+ { B , A , K , J }\r
+ { G , F , Q , H }\r
+\r
+ The character 'A' for example is:\r
+ -------------------------------\r
+LSB { 1 , 0 , 0 , 0 }\r
+ { 1 , 1 , 0 , 0 }\r
+ { 1 , 1 , 0 , 0 }\r
+MSB { 1 , 1 , 0 , 0 }\r
+ -------------------\r
+ 'A' = F E 0 0 hexa\r
+\r
+*/\r
+\r
+/* Constant table for cap characters 'A' --> 'Z' */\r
+const uint16_t CapLetterMap[26]=\r
+ {\r
+ /* A B C D E F G H I */\r
+ 0xFE00,0x6714,0x1d00,0x4714,0x9d00,0x9c00,0x3f00,0xfa00,0x0014,\r
+ /* J K L M N O P Q R */\r
+ 0x5300,0x9841,0x1900,0x5a48,0x5a09,0x5f00,0xFC00,0x5F01,0xFC01,\r
+ /* S T U V W X Y Z */\r
+ 0xAF00,0x0414,0x5b00,0x18c0,0x5a81,0x00c9,0x0058,0x05c0\r
+ };\r
+\r
+/* Constant table for number '0' --> '9' */\r
+const uint16_t NumberMap[10]=\r
+ {\r
+ /* 0 1 2 3 4 5 6 7 8 9 */\r
+ 0x5F00,0x4200,0xF500,0x6700,0xEa00,0xAF00,0xBF00,0x04600,0xFF00,0xEF00\r
+ };\r
+\r
+static void LCD_Conv_Char_Seg(uint8_t* c,bool point,bool column,uint8_t* digit);\r
+\r
+/**\r
+ * @brief Configures the LCD GLASS relative GPIO port IOs and LCD peripheral.\r
+ * @param None\r
+ * @retval None\r
+ */\r
+void LCD_GLASS_Init(void)\r
+{\r
+ LCD_InitTypeDef LCD_InitStruct;\r
+\r
+ \r
+ LCD_InitStruct.LCD_Prescaler = LCD_Prescaler_1;\r
+ LCD_InitStruct.LCD_Divider = LCD_Divider_31;\r
+ LCD_InitStruct.LCD_Duty = LCD_Duty_1_4;\r
+ LCD_InitStruct.LCD_Bias = LCD_Bias_1_3;\r
+ LCD_InitStruct.LCD_VoltageSource = LCD_VoltageSource_Internal;\r
+\r
+ \r
+ /* Initialize the LCD */\r
+ LCD_Init(&LCD_InitStruct);\r
+ \r
+ LCD_MuxSegmentCmd(ENABLE);\r
+ \r
+ /* To set contrast to mean value */\r
+ LCD_ContrastConfig(LCD_Contrast_Level_4);\r
+ \r
+ LCD_DeadTimeConfig(LCD_DeadTime_0);\r
+ LCD_PulseOnDurationConfig(LCD_PulseOnDuration_4);\r
+\r
+ /* Wait Until the LCD FCR register is synchronized */\r
+ LCD_WaitForSynchro();\r
+ \r
+ /* Enable LCD peripheral */\r
+ LCD_Cmd(ENABLE);\r
+ \r
+ /* Wait Until the LCD is enabled */\r
+ while(LCD_GetFlagStatus(LCD_FLAG_ENS) == RESET)\r
+ {\r
+ }\r
+ /*!< Wait Until the LCD Booster is ready */ \r
+ while(LCD_GetFlagStatus(LCD_FLAG_RDY) == RESET)\r
+ {\r
+ } \r
+\r
+ LCD_BlinkConfig(LCD_BlinkMode_Off,LCD_BlinkFrequency_Div32); \r
+ LCD_GLASS_Clear();\r
+}\r
+\r
+/**\r
+ * @brief To initialize the LCD pins\r
+ * @caller main\r
+ * @param None\r
+ * @retval None\r
+ */\r
+\r
+void LCD_GLASS_Configure_GPIO(void)\r
+{\r
+ GPIO_InitTypeDef GPIO_InitStructure;\r
+ \r
+/* Enable GPIOs clock */ \r
+ RCC_AHBPeriphClockCmd(RCC_AHBPeriph_GPIOA | RCC_AHBPeriph_GPIOB | RCC_AHBPeriph_GPIOC |\r
+ RCC_AHBPeriph_GPIOD | RCC_AHBPeriph_GPIOE | RCC_AHBPeriph_GPIOH, ENABLE);\r
+\r
+ \r
+/* Configure Output for LCD */\r
+/* Port A */\r
+ GPIO_StructInit(&GPIO_InitStructure);\r
+ GPIO_InitStructure.GPIO_Pin = GPIO_Pin_1 | GPIO_Pin_2 | GPIO_Pin_3 | GPIO_Pin_8 | GPIO_Pin_9 |GPIO_Pin_10 |GPIO_Pin_15;\r
+ GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF;\r
+ GPIO_Init( GPIOA, &GPIO_InitStructure);\r
+\r
+ GPIO_PinAFConfig(GPIOA, GPIO_PinSource1,GPIO_AF_LCD) ;\r
+ GPIO_PinAFConfig(GPIOA, GPIO_PinSource2,GPIO_AF_LCD) ;\r
+ GPIO_PinAFConfig(GPIOA, GPIO_PinSource3,GPIO_AF_LCD) ;\r
+ GPIO_PinAFConfig(GPIOA, GPIO_PinSource8,GPIO_AF_LCD) ;\r
+ GPIO_PinAFConfig(GPIOA, GPIO_PinSource9,GPIO_AF_LCD) ;\r
+ GPIO_PinAFConfig(GPIOA, GPIO_PinSource10,GPIO_AF_LCD) ;\r
+ GPIO_PinAFConfig(GPIOA, GPIO_PinSource15,GPIO_AF_LCD) ; \r
+ \r
+/* Configure Output for LCD */\r
+/* Port B */ \r
+ GPIO_InitStructure.GPIO_Pin = GPIO_Pin_3 | GPIO_Pin_4 | GPIO_Pin_5 | GPIO_Pin_8 | GPIO_Pin_9 \\r
+ | GPIO_Pin_10 | GPIO_Pin_11 | GPIO_Pin_12 | GPIO_Pin_13 | GPIO_Pin_14 | GPIO_Pin_15; \r
+ GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF;\r
+ GPIO_Init( GPIOB, &GPIO_InitStructure);\r
+ \r
+ GPIO_PinAFConfig(GPIOB, GPIO_PinSource3,GPIO_AF_LCD) ;\r
+ GPIO_PinAFConfig(GPIOB, GPIO_PinSource4,GPIO_AF_LCD) ;\r
+ GPIO_PinAFConfig(GPIOB, GPIO_PinSource5,GPIO_AF_LCD) ;\r
+ GPIO_PinAFConfig(GPIOB, GPIO_PinSource8,GPIO_AF_LCD) ;\r
+ GPIO_PinAFConfig(GPIOB, GPIO_PinSource9,GPIO_AF_LCD) ;\r
+ GPIO_PinAFConfig(GPIOB, GPIO_PinSource10,GPIO_AF_LCD) ;\r
+ GPIO_PinAFConfig(GPIOB, GPIO_PinSource11,GPIO_AF_LCD) ; \r
+ GPIO_PinAFConfig(GPIOB, GPIO_PinSource12,GPIO_AF_LCD) ;\r
+ GPIO_PinAFConfig(GPIOB, GPIO_PinSource13,GPIO_AF_LCD) ; \r
+ GPIO_PinAFConfig(GPIOB, GPIO_PinSource14,GPIO_AF_LCD) ;\r
+ GPIO_PinAFConfig(GPIOB, GPIO_PinSource15,GPIO_AF_LCD) ; \r
+ \r
+/* Configure Output for LCD */\r
+/* Port C*/ \r
+ GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0 | GPIO_Pin_1 | GPIO_Pin_2 | GPIO_Pin_3 | GPIO_Pin_6 \\r
+ | GPIO_Pin_7 | GPIO_Pin_8 | GPIO_Pin_9 | GPIO_Pin_10 |GPIO_Pin_11 ; \r
+ GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF;\r
+ GPIO_Init( GPIOC, &GPIO_InitStructure); \r
+ \r
+\r
+ GPIO_PinAFConfig(GPIOC, GPIO_PinSource0,GPIO_AF_LCD) ;\r
+ GPIO_PinAFConfig(GPIOC, GPIO_PinSource1,GPIO_AF_LCD) ; \r
+ GPIO_PinAFConfig(GPIOC, GPIO_PinSource2,GPIO_AF_LCD) ;\r
+ GPIO_PinAFConfig(GPIOC, GPIO_PinSource3,GPIO_AF_LCD) ;\r
+ GPIO_PinAFConfig(GPIOC, GPIO_PinSource6,GPIO_AF_LCD) ;\r
+ GPIO_PinAFConfig(GPIOC, GPIO_PinSource7,GPIO_AF_LCD) ;\r
+ GPIO_PinAFConfig(GPIOC, GPIO_PinSource8,GPIO_AF_LCD) ;\r
+ GPIO_PinAFConfig(GPIOC, GPIO_PinSource9,GPIO_AF_LCD) ;\r
+ GPIO_PinAFConfig(GPIOC, GPIO_PinSource10,GPIO_AF_LCD) ; \r
+ GPIO_PinAFConfig(GPIOC, GPIO_PinSource11,GPIO_AF_LCD) ; \r
+\r
+/* Disable GPIOs clock */ \r
+ RCC_AHBPeriphClockCmd(RCC_AHBPeriph_GPIOA | RCC_AHBPeriph_GPIOB | RCC_AHBPeriph_GPIOC |\r
+ RCC_AHBPeriph_GPIOD | RCC_AHBPeriph_GPIOE | RCC_AHBPeriph_GPIOH, DISABLE);\r
+ \r
+}\r
+\r
+/**\r
+ * @brief LCD contrast setting min-->max-->min by pressing user button\r
+ * @param None\r
+ * @retval None\r
+ */\r
+\r
+static void Delay(uint32_t nTime)\r
+{\r
+ while((nTime--) != 0); \r
+}\r
+\r
+void LCD_contrast()\r
+{\r
+ uint32_t contrast ;\r
+ \r
+ /* To get the actual contrast value in register */\r
+ contrast = LCD->FCR & LCD_Contrast_Level_7;\r
+ \r
+ while ((GPIOC->IDR & USERBUTTON_GPIO_PIN) == 0x0)\r
+ {\r
+ contrast += LCD_Contrast_Level_1; \r
+ \r
+ if (contrast > LCD_Contrast_Level_7)\r
+ contrast=LCD_Contrast_Level_0;\r
+ \r
+ LCD_ContrastConfig(contrast);\r
+ Delay(100);\r
+ }\r
+}\r
+\r
+/**\r
+ * @brief Setting bar on LCD, writes bar value in LCD frame buffer \r
+ * @param None\r
+ * @retval None\r
+ */\r
+void LCD_bar()\r
+{\r
+ \r
+ LCD->RAM[LCD_RAMRegister_4] &= 0xffff5fff;\r
+ LCD->RAM[LCD_RAMRegister_6] &= 0xffff5fff;\r
+/* bar1 bar3 */\r
+ LCD->RAM[LCD_RAMRegister_4] |= (uint32_t)(t_bar[0]<<12);\r
+ \r
+/*bar0 bar2 */\r
+ LCD->RAM[LCD_RAMRegister_6] |= (uint32_t)(t_bar[1]<<12);\r
+ \r
+}\r
+\r
+/**\r
+ * @brief Converts an ascii char to the a LCD digit.\r
+ * @param c: a char to display.\r
+ * @param point: a point to add in front of char\r
+ * This parameter can be: POINT_OFF or POINT_ON\r
+ * @param column : flag indicating if a column has to be add in front\r
+ * of displayed character.\r
+ * This parameter can be: COLUMN_OFF or COLUMN_ON.\r
+ * @param digit array with segment \r
+ * @retval None\r
+ */\r
+static void LCD_Conv_Char_Seg(uint8_t* c,bool point,bool column, uint8_t* digit)\r
+{\r
+ uint16_t ch = 0 ;\r
+ uint8_t i,j;\r
+ \r
+ switch (*c)\r
+ {\r
+ case ' ' : \r
+ ch = 0x00;\r
+ break;\r
+ \r
+ case '*':\r
+ ch = star;\r
+ break;\r
+ \r
+ case 'µ' :\r
+ ch = C_UMAP;\r
+ break;\r
+ \r
+ case 'm' :\r
+ ch = C_mMap;\r
+ break;\r
+ \r
+ case 'n' :\r
+ ch = C_nMap;\r
+ break; \r
+ \r
+ case '-' :\r
+ ch = C_minus;\r
+ break;\r
+ \r
+ case '/' :\r
+ ch = C_slatch;\r
+ break; \r
+ \r
+ case '°' :\r
+ ch = C_percent_1;\r
+ break; \r
+ case '%' :\r
+ ch = C_percent_2; \r
+ break;\r
+ case 255 :\r
+ ch = C_full;\r
+ break ;\r
+ \r
+ case '0':\r
+ case '1':\r
+ case '2':\r
+ case '3':\r
+ case '4':\r
+ case '5':\r
+ case '6':\r
+ case '7':\r
+ case '8':\r
+ case '9': \r
+ ch = NumberMap[*c-0x30]; \r
+ break;\r
+ \r
+ default:\r
+ /* The character c is one letter in upper case*/\r
+ if ( (*c < 0x5b) && (*c > 0x40) )\r
+ {\r
+ ch = CapLetterMap[*c-'A'];\r
+ }\r
+ /* The character c is one letter in lower case*/\r
+ if ( (*c <0x7b) && ( *c> 0x60) )\r
+ {\r
+ ch = CapLetterMap[*c-'a'];\r
+ }\r
+ break;\r
+ }\r
+ \r
+ /* Set the digital point can be displayed if the point is on */\r
+ if (point)\r
+ {\r
+ ch |= 0x0002;\r
+ }\r
+\r
+ /* Set the "COL" segment in the character that can be displayed if the column is on */\r
+ if (column)\r
+ {\r
+ ch |= 0x0020;\r
+ } \r
+\r
+ for (i = 12,j=0 ;j<4; i-=4,j++)\r
+ {\r
+ digit[j] = (ch >> i) & 0x0f; //To isolate the less signifiant dibit\r
+ }\r
+}\r
+\r
+/**\r
+ * @brief This function writes a char in the LCD frame buffer.\r
+ * @param ch: the character to display.\r
+ * @param point: a point to add in front of char\r
+ * This parameter can be: POINT_OFF or POINT_ON\r
+ * @param column: flag indicating if a column has to be add in front\r
+ * of displayed character.\r
+ * This parameter can be: COLUMN_OFF or COLUMN_ON. \r
+ * @param position: position in the LCD of the caracter to write [0:7]\r
+ * @retval None\r
+ * @par Required preconditions: The LCD should be cleared before to start the\r
+ * write operation. \r
+ */\r
+void LCD_GLASS_WriteChar(uint8_t* ch, bool point, bool column, uint8_t position)\r
+{\r
+ uint8_t digit[4]; /* Digit frame buffer */\r
+ \r
+/* To convert displayed character in segment in array digit */\r
+ LCD_Conv_Char_Seg(ch,point,column,digit);\r
+\r
+/* TO wait LCD Ready */ \r
+ while( LCD_GetFlagStatus (LCD_FLAG_UDR) != RESET) ;\r
+ \r
+ switch (position)\r
+ {\r
+ /* Position 1 on LCD (Digit1)*/\r
+ case 1:\r
+ LCD->RAM[LCD_RAMRegister_0] &= 0xcffffffc;\r
+ LCD->RAM[LCD_RAMRegister_2] &= 0xcffffffc;\r
+ LCD->RAM[LCD_RAMRegister_4] &= 0xcffffffc;\r
+ LCD->RAM[LCD_RAMRegister_6] &= 0xcffffffc;\r
+\r
+ LCD->RAM[LCD_RAMRegister_0] |= ((digit[0]& 0x0c) << 26 ) | (digit[0]& 0x03) ; // 1G 1B 1M 1E \r
+ LCD->RAM[LCD_RAMRegister_2] |= ((digit[1]& 0x0c) << 26 ) | (digit[1]& 0x03) ; // 1F 1A 1C 1D \r
+ LCD->RAM[LCD_RAMRegister_4] |= ((digit[2]& 0x0c) << 26 ) | (digit[2]& 0x03) ; // 1Q 1K 1Col 1P \r
+ LCD->RAM[LCD_RAMRegister_6] |= ((digit[3]& 0x0c) << 26 ) | (digit[3]& 0x03) ; // 1H 1J 1DP 1N\r
+\r
+ break;\r
+ \r
+ /* Position 2 on LCD (Digit2)*/\r
+ case 2:\r
+ LCD->RAM[LCD_RAMRegister_0] &= 0xf3ffff03;\r
+ LCD->RAM[LCD_RAMRegister_2] &= 0xf3ffff03; \r
+ LCD->RAM[LCD_RAMRegister_4] &= 0xf3ffff03;\r
+ LCD->RAM[LCD_RAMRegister_6] &= 0xf3ffff03;\r
+ \r
+ LCD->RAM[LCD_RAMRegister_0] |= ((digit[0]& 0x0c) << 24 )|((digit[0]& 0x02) << 6 )|((digit[0]& 0x01) << 2 ) ; // 2G 2B 2M 2E \r
+ LCD->RAM[LCD_RAMRegister_2] |= ((digit[1]& 0x0c) << 24 )|((digit[1]& 0x02) << 6 )|((digit[1]& 0x01) << 2 ) ; // 2F 2A 2C 2D\r
+ LCD->RAM[LCD_RAMRegister_4] |= ((digit[2]& 0x0c) << 24 )|((digit[2]& 0x02) << 6 )|((digit[2]& 0x01) << 2 ) ; // 2Q 2K 2Col 2P\r
+ LCD->RAM[LCD_RAMRegister_6] |= ((digit[3]& 0x0c) << 24 )|((digit[3]& 0x02) << 6 )|((digit[3]& 0x01) << 2 ) ; // 2H 2J 2DP 2N\r
+ \r
+ break;\r
+ \r
+ /* Position 3 on LCD (Digit3)*/\r
+ case 3:\r
+ LCD->RAM[LCD_RAMRegister_0] &= 0xfcfffcff;\r
+ LCD->RAM[LCD_RAMRegister_2] &= 0xfcfffcff;\r
+ LCD->RAM[LCD_RAMRegister_4] &= 0xfcfffcff;\r
+ LCD->RAM[LCD_RAMRegister_6] &= 0xfcfffcff;\r
+\r
+ LCD->RAM[LCD_RAMRegister_0] |= ((digit[0]& 0x0c) << 22 ) | ((digit[0]& 0x03) << 8 ) ; // 3G 3B 3M 3E \r
+ LCD->RAM[LCD_RAMRegister_2] |= ((digit[1]& 0x0c) << 22 ) | ((digit[1]& 0x03) << 8 ) ; // 3F 3A 3C 3D\r
+ LCD->RAM[LCD_RAMRegister_4] |= ((digit[2]& 0x0c) << 22 ) | ((digit[2]& 0x03) << 8 ) ; // 3Q 3K 3Col 3P\r
+ LCD->RAM[LCD_RAMRegister_6] |= ((digit[3]& 0x0c) << 22 ) | ((digit[3]& 0x03) << 8 ) ; // 3H 3J 3DP 3N\r
+ \r
+ break;\r
+ \r
+ /* Position 4 on LCD (Digit4)*/\r
+ case 4:\r
+ LCD->RAM[LCD_RAMRegister_0] &= 0xffcff3ff;\r
+ LCD->RAM[LCD_RAMRegister_2] &= 0xffcff3ff;\r
+ LCD->RAM[LCD_RAMRegister_4] &= 0xffcff3ff;\r
+ LCD->RAM[LCD_RAMRegister_6] &= 0xffcff3ff;\r
+ \r
+ LCD->RAM[LCD_RAMRegister_0] |= ((digit[0]& 0x0c) << 18 ) | ((digit[0]& 0x03) << 10 ) ; // 4G 4B 4M 4E \r
+ LCD->RAM[LCD_RAMRegister_2] |= ((digit[1]& 0x0c) << 18 ) | ((digit[1]& 0x03) << 10 ) ; // 4F 4A 4C 4D\r
+ LCD->RAM[LCD_RAMRegister_4] |= ((digit[2]& 0x0c) << 18 ) | ((digit[2]& 0x03) << 10 ) ; // 4Q 4K 4Col 4P\r
+ LCD->RAM[LCD_RAMRegister_6] |= ((digit[3]& 0x0c) << 18 ) | ((digit[3]& 0x03) << 10 ) ; // 4H 4J 4DP 4N\r
+ \r
+ break;\r
+ \r
+ /* Position 5 on LCD (Digit5)*/\r
+ case 5:\r
+ LCD->RAM[LCD_RAMRegister_0] &= 0xfff3cfff;\r
+ LCD->RAM[LCD_RAMRegister_2] &= 0xfff3cfff;\r
+ LCD->RAM[LCD_RAMRegister_4] &= 0xfff3efff;\r
+ LCD->RAM[LCD_RAMRegister_6] &= 0xfff3efff;\r
+\r
+ LCD->RAM[LCD_RAMRegister_0] |= ((digit[0]& 0x0c) << 16 ) | ((digit[0]& 0x03) << 12 ) ; // 5G 5B 5M 5E \r
+ LCD->RAM[LCD_RAMRegister_2] |= ((digit[1]& 0x0c) << 16 ) | ((digit[1]& 0x03) << 12 ) ; // 5F 5A 5C 5D\r
+ LCD->RAM[LCD_RAMRegister_4] |= ((digit[2]& 0x0c) << 16 ) | ((digit[2]& 0x01) << 12 ) ; // 5Q 5K 5P \r
+ LCD->RAM[LCD_RAMRegister_6] |= ((digit[3]& 0x0c) << 16 ) | ((digit[3]& 0x01) << 12 ) ; // 5H 5J 5N\r
+ \r
+ break;\r
+ \r
+ /* Position 6 on LCD (Digit6)*/\r
+ case 6:\r
+ LCD->RAM[LCD_RAMRegister_0] &= 0xfffc3fff;\r
+ LCD->RAM[LCD_RAMRegister_2] &= 0xfffc3fff;\r
+ LCD->RAM[LCD_RAMRegister_4] &= 0xfffc3fff;\r
+ LCD->RAM[LCD_RAMRegister_6] &= 0xfffc3fff;\r
+\r
+ LCD->RAM[LCD_RAMRegister_0] |= ((digit[0]& 0x04) << 15 ) | ((digit[0]& 0x08) << 13 ) | ((digit[0]& 0x03) << 14 ) ; // 6B 6G 6M 6E \r
+ LCD->RAM[LCD_RAMRegister_2] |= ((digit[1]& 0x04) << 15 ) | ((digit[1]& 0x08) << 13 ) | ((digit[1]& 0x03) << 14 ) ; // 6A 6F 6C 6D\r
+ LCD->RAM[LCD_RAMRegister_4] |= ((digit[2]& 0x04) << 15 ) | ((digit[2]& 0x08) << 13 ) | ((digit[2]& 0x01) << 14 ) ; // 6K 6Q 6P \r
+ LCD->RAM[LCD_RAMRegister_6] |= ((digit[3]& 0x04) << 15 ) | ((digit[3]& 0x08) << 13 ) | ((digit[3]& 0x01) << 14 ) ; // 6J 6H 6N\r
+ \r
+ break;\r
+ \r
+ default:\r
+ break;\r
+ }\r
+\r
+/* Refresh LCD bar */\r
+ LCD_bar();\r
+\r
+/* Update the LCD display */\r
+ LCD_UpdateDisplayRequest();\r
+ \r
+}\r
+\r
+/**\r
+ * @brief This function writes a char in the LCD RAM.\r
+ * @param ptr: Pointer to string to display on the LCD Glass.\r
+ * @retval None\r
+ */\r
+void LCD_GLASS_DisplayString(uint8_t* ptr)\r
+{\r
+ uint8_t i = 0x01;\r
+\r
+ /* Send the string character by character on lCD */\r
+ while ((*ptr != 0) & (i < 8))\r
+ {\r
+ /* Display one character on LCD */\r
+ LCD_GLASS_WriteChar(ptr, FALSE, FALSE, i);\r
+\r
+ /* Point on the next character */\r
+ ptr++;\r
+\r
+ /* Increment the character counter */\r
+ i++;\r
+ }\r
+}\r
+\r
+/**\r
+ * @brief This function writes a char in the LCD RAM.\r
+ * @param ptr: Pointer to string to display on the LCD Glass.\r
+ * @retval None\r
+ * @par Required preconditions: Char is ASCCI value "Ored" with decimal point or Column flag\r
+ */\r
+void LCD_GLASS_DisplayStrDeci(uint16_t* ptr)\r
+{\r
+ uint8_t i = 0x01;\r
+ uint8_t char_tmp;\r
+ \r
+// LCD_GLASS_Clear();\r
+ /* Send the string character by character on lCD */\r
+ while ((*ptr != 0) & (i < 8))\r
+ { \r
+ char_tmp = (*ptr) & 0x00ff;\r
+ \r
+ switch ((*ptr) & 0xf000)\r
+ {\r
+ case DOT:\r
+ /* Display one character on LCD with decimal point */\r
+ LCD_GLASS_WriteChar(&char_tmp, POINT_ON, COLUMN_OFF, i);\r
+ break;\r
+ case DOUBLE_DOT:\r
+ /* Display one character on LCD with decimal point */\r
+ LCD_GLASS_WriteChar(&char_tmp, POINT_OFF, COLUMN_ON, i);\r
+ break;\r
+ default:\r
+ LCD_GLASS_WriteChar(&char_tmp, POINT_OFF, COLUMN_OFF, i); \r
+ break;\r
+ }/* Point on the next character */\r
+ ptr++;\r
+ \r
+ /* Increment the character counter */\r
+ i++;\r
+ }\r
+}\r
+\r
+/**\r
+ * @brief This function Clear the whole LCD RAM.\r
+ * @param None\r
+ * @retval None\r
+ */\r
+void LCD_GLASS_Clear(void)\r
+{\r
+ uint8_t counter = 0;\r
+\r
+ /* TO wait LCD Ready */ \r
+ while( LCD_GetFlagStatus (LCD_FLAG_UDR) != RESET) ;\r
+ \r
+ for (counter = LCD_RAMRegister_0; counter <= LCD_RAMRegister_15; counter++)\r
+ {\r
+ LCD->RAM[counter] = 0;\r
+ }\r
+\r
+ /* Update the LCD display */\r
+ LCD_UpdateDisplayRequest();\r
+ \r
+}\r
+\r
+/**\r
+ * @brief Display a string in scrolling mode\r
+ * @param ptr: Pointer to string to display on the LCD Glass.\r
+ * @param nScroll: Specifies how many time the message will be scrolled\r
+ * @param ScrollSpeed : Speciifes the speed of the scroll, low value gives\r
+ * higher speed \r
+ * @retval None\r
+ * @par Required preconditions: The LCD should be cleared before to start the\r
+ * write operation.\r
+ */\r
+void LCD_GLASS_ScrollSentence(uint8_t* ptr, uint16_t nScroll, uint16_t ScrollSpeed)\r
+{\r
+ uint8_t Repetition;\r
+ uint8_t Char_Nb;\r
+ uint8_t* ptr1;\r
+ uint8_t str[7]="";\r
+ uint8_t Str_size;\r
+ \r
+ if (ptr == 0) return;\r
+\r
+/* To calculate end of string */\r
+ for (ptr1=ptr,Str_size = 0 ; *ptr1 != 0; Str_size++,ptr1++) ;\r
+ \r
+ ptr1 = ptr;\r
+ \r
+ LCD_GLASS_DisplayString(ptr);\r
+ Delay(ScrollSpeed);\r
+ \r
+/* To shift the string for scrolling display*/\r
+ for (Repetition=0; Repetition<nScroll; Repetition++)\r
+ {\r
+ for (Char_Nb=0; Char_Nb<Str_size; Char_Nb++)\r
+ {\r
+ *(str) =* (ptr1+((Char_Nb+1)%Str_size));\r
+ *(str+1) =* (ptr1+((Char_Nb+2)%Str_size));\r
+ *(str+2) =* (ptr1+((Char_Nb+3)%Str_size));\r
+ *(str+3) =* (ptr1+((Char_Nb+4)%Str_size));\r
+ *(str+4) =* (ptr1+((Char_Nb+5)%Str_size));\r
+ *(str+5) =* (ptr1+((Char_Nb+6)%Str_size));\r
+ LCD_GLASS_Clear();\r
+ LCD_GLASS_DisplayString(str);\r
+ \r
+ /* user button pressed stop the scrolling sentence */\r
+ if (KeyPressed)\r
+ return; \r
+ Delay(ScrollSpeed);\r
+ } \r
+ }\r
+\r
+}\r
+\r
+/******************* (C) COPYRIGHT 2011 STMicroelectronics *****END OF FILE****/\r
projects / fw / stlink / blobdiff