== Updating Device Firmware
ifdef::telemega[]
- TeleMega, TeleMetrum v2, EasyMega, EasyMini and TeleDongle v3
+ TeleMega, TeleMetrum v2 and newer, EasyMega, EasyMini and TeleDongle v3
are all
endif::telemega[]
ifndef::telemega[]
ifdef::telemega[]
- === Updating TeleMega, TeleMetrum v2, EasyMega, EasyMini or TeleDongle v3 Firmware
+ === Updating TeleMega, TeleMetrum v2 or newer, EasyMega, EasyMini, TeleDongle v3 or TeleBT v3 Firmware
endif::telemega[]
ifndef::telemega[]
endif::easymega[]
ifdef::telemetrum[]
- TeleMetrum v2::
+ TeleMetrum v2 and newer::
Connect pin 6 and pin 1 of the companion
connector. Pin 1 can be identified by the square pad
the one on the other end of the row.
endif::easymini[]
+ TeleGPS v1::
+
+ Connect pin 32 on the CPU to ground. Pin 32 is the
+ right-most pin on the bottom edge of the CPU when the
+ board is oriented with the USB and battery connectors
+ to the right.
+
+ TeleGPS v2::
+
+ Connect together pins 1 and 5 of the Debug connector.
+ Pin 1 is the pin with the square pad around the hole.
+
ifdef::telemetrum[]
TeleDongle v3::