-#LyX 1.4.1 created this file. For more info see http://www.lyx.org/
-\lyxformat 221
+#LyX 1.4.3 created this file. For more info see http://www.lyx.org/
+\lyxformat 245
+\begin_document
+\begin_header
\textclass book
\begin_preamble
\pdfoptionpdfminorversion=3
\paperfontsize default
\spacing single
\papersize letterpaper
-\use_geometry 1
-\use_amsmath 0
-\use_natbib 0
-\use_numerical_citations 0
+\use_geometry true
+\use_amsmath 1
+\cite_engine basic
+\use_bibtopic false
\paperorientation portrait
\leftmargin 30mm
\topmargin 20mm
\papercolumns 1
\papersides 1
\paperpagestyle fancy
+\tracking_changes false
+\output_changes true
+\end_header
-\layout Standard
-\begin_inset Note
-collapsed true
+\begin_body
-\layout Standard
+\begin_layout Standard
+\begin_inset Note Note
+status collapsed
+
+\begin_layout Standard
Please note: double dashed longoptions (e.g.
--version) are written this way: -
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
-
+\end_layout
-\layout Standard
+\begin_layout Standard
Two resp.
- three consecutive dashes simply result in a long resp.
+ three consecutive dashes would otherwise result in a long resp.
extra long dash.
+\end_layout
-\layout Standard
+\begin_layout Standard
Architecture specific stuff (like memory models, code examples) should maybe
later go
+\end_layout
-\layout Standard
+\begin_layout Standard
into seperate sections/chapters/appendices (it is hard to document PIC or
Z80 in
+\end_layout
-\layout Standard
+\begin_layout Standard
a 8051 centered document) - for now simply add.
+\end_layout
\end_inset
+\end_layout
-\layout Title
+\begin_layout Title
SDCC Compiler User Guide
+\end_layout
-\layout Date
+\begin_layout Date
\size normal
-SDCC 2.6.4
+SDCC 2.7.4
\size footnotesize
\newline
-$Date$
+$Date:: $
\newline
$Revision$
+\end_layout
-\layout Standard
-\begin_inset Note
-collapsed true
+\begin_layout Standard
+\begin_inset Note Note
+status collapsed
-\layout Standard
+\begin_layout Standard
The above strings enclosed in $ are automatically updated by Subversion
+\end_layout
\end_inset
+\end_layout
-\layout Standard
+\begin_layout Standard
\begin_inset LatexCommand \tableofcontents{}
\end_inset
+\end_layout
-\layout Chapter
+\begin_layout Chapter
Introduction
+\end_layout
-\layout Section
+\begin_layout Section
About SDCC
+\end_layout
-\layout Standard
+\begin_layout Standard
\series bold
SDCC
\emph on
C
\emph default
-ompiler) is an open source, retargettable, optimizing ANSI-C compiler by
-
+ompiler) is free open source, retargettable, optimizing ANSI-C compiler
+ by
\series bold
Sandeep Dutta
\series default
\newline
In addition to the MCU specific optimizations SDCC also does a host of
standard optimizations like:
+\end_layout
-\layout Itemize
+\begin_layout Itemize
global sub expression elimination,
+\end_layout
-\layout Itemize
+\begin_layout Itemize
loop optimizations (loop invariant, strength reduction of induction variables
and loop reversing),
+\end_layout
-\layout Itemize
+\begin_layout Itemize
constant folding & propagation,
+\end_layout
-\layout Itemize
+\begin_layout Itemize
copy propagation,
+\end_layout
-\layout Itemize
+\begin_layout Itemize
dead code elimination
+\end_layout
-\layout Itemize
+\begin_layout Itemize
jump tables for
\emph on
switch
\emph default
statements.
+\end_layout
-\layout Standard
+\begin_layout Standard
For the back-end SDCC uses a global register allocation scheme which should
be well suited for other 8 bit MCUs.
\newline
Supported data-types are:
+\end_layout
-\layout Standard
+\begin_layout Standard
\begin_inset Tabular
<lyxtabular version="3" rows="8" columns="5">
<features>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
type
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
width
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
default
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
signed range
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
unsigned range
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
bool
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
1 bit
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
unsigned
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
-
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
0, 1
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
char
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
8 bits, 1 byte
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
signed
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
-128, +127
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
0, +255
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
short
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
16 bits, 2 bytes
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
signed
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
-32.768, +32.767
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
0, +65.535
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
int
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
16 bits, 2 bytes
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
signed
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
-32.768, +32.767
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
0, +65.535
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
long
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
32 bits, 4 bytes
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
signed
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
-2.147.483.648, +2.147.483.647
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
0, +4.294.967.295
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
float
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
4 bytes IEEE 754
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
signed
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
1.175494351E-38,
\family roman
\series medium
\noun off
\color none
3.402823466E+38
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
pointer
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
1, 2, 3 or 4 bytes
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
generic
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
+\end_layout
\end_inset
</cell>
SDCC also
provides an option (-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
\newline
\newline
-SDCC also comes with a companion source level debugger SDCDB, the debugger
- currently uses ucSim a freeware simulator for 8051 and other micro-controllers.<
+SDCC also comes with a companion source level debugger SDCDB.
+ The debugger currently uses ucSim, a free open source simulator for 8051
+ and other micro-controllers.
\newline
\newline
-
-The latest version can be downloaded from
+The latest SDCC version can be downloaded from
+
\begin_inset LatexCommand \url{http://sdcc.sourceforge.net/snap.php}
\end_inset
\begin_inset Foot
-collapsed false
+status open
-\layout Standard
+\begin_layout Standard
Obviously this has pros and cons
+\end_layout
\end_inset
.
+\end_layout
-\layout Section
+\begin_layout Section
Open Source
+\end_layout
-\layout Standard
+\begin_layout Standard
All packages used in this compiler system are
\emph on
open source
freeware
\emph default
; source code for all the sub-packages (pre-processor, assemblers, linkers
- etc) is distributed with the package.
- This documentation is maintained using a freeware word processor (LyX).
+ etc.) is distributed with the package.
+ This documentation is maintained using a free open source word processor
+ (LyX).
\newline
-This
- program is free software; you can redistribute it and/or modify it under
- the terms of the GNU General Public License
+This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License
\begin_inset LatexCommand \index{GNU General Public License, GPL}
\end_inset
You are forbidden to forbid anyone else to use, share and improve what
you give them.
Help stamp out software-hoarding!
+\end_layout
-\layout Section
+\begin_layout Section
Typographic conventions
\begin_inset LatexCommand \index{Typographic conventions}
\end_inset
+\end_layout
-\layout Standard
+\begin_layout Standard
Throughout this manual, we will use the following convention.
Commands you have to type in are printed in
\family sans
Interesting items and new terms are printed in
\emph on
italic.
+\end_layout
-\layout Section
+\begin_layout Section
Compatibility
\begin_inset LatexCommand \label{sec:Compatibility-with-previous}
\end_inset
+\end_layout
-\layout Standard
-This version has numerous bug fixes compared with the previous version.
- But we also introduced some incompatibilities with older versions.
+\begin_layout Standard
+Newer versions have usually numerous bug fixes compared with the previous
+ version.
+ But we also sometimes introduce some incompatibilities with older versions.
Not just for the fun of it, but to make the compiler more stable, efficient
and ANSI compliant
\begin_inset LatexCommand \index{ANSI-compliance}
for ANSI-Compliance).
+\begin_inset Note Note
+status collapsed
+
+\begin_layout Standard
+It would be fine to add to each item, in which version was it changed.
+\end_layout
+
+\end_inset
+
+
\newline
+\end_layout
-\layout Itemize
+\begin_layout Itemize
short is now equivalent to int (16 bits), it used to be equivalent to char
(8 bits) which is not ANSI compliant.
+ To maintain compatibility, old programs may be compiled using the -
+\begin_inset ERT
+status collapsed
+
+\begin_layout Standard
+
+
+\backslash
+/
+\end_layout
+
+\end_inset
+
+-short-is-8bits commandline option (see
+\begin_inset LatexCommand \vref{lyx:--short-is-8bits}
+
+\end_inset
-\layout Itemize
+).
+\end_layout
+
+\begin_layout Itemize
the default directory for gcc-builds where include, library and documentation
files are stored is now in /usr/local/share.
+\end_layout
-\layout Itemize
+\begin_layout Itemize
char type parameters to vararg
\begin_inset LatexCommand \index{vararg, va\_arg}
functions are casted to int unless explicitly casted
\begin_inset Marginal
-collapsed true
+status collapsed
-\layout Standard
+\begin_layout Standard
\series bold
-\SpecialChar ~
+\InsetSpace ~
!
+\end_layout
\end_inset
\newline
\family typewriter
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
char a=3;
\newline
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
printf ("%d %c
\backslash
n", a, (char)a);
\newline
will push a as an int and as a char resp.
+\end_layout
-\layout Itemize
+\begin_layout Itemize
option -
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
-regextend has been removed.
+\end_layout
-\layout Itemize
+\begin_layout Itemize
option -
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
-noregparms has been removed.
+\end_layout
-\layout Itemize
+\begin_layout Itemize
option -
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
-stack-after-data has been removed.
+\end_layout
-\layout Itemize
+\begin_layout Itemize
bit
\begin_inset LatexCommand \index{bit}
\newline
\family typewriter
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
bit b;
\newline
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
b = ~
\begin_inset LatexCommand \index{\~\/ Operator}
b; /* equivalent to b=1 instead of toggling b */
\begin_inset Marginal
-collapsed true
+status collapsed
-\layout Standard
+\begin_layout Standard
\series bold
-\SpecialChar ~
+\InsetSpace ~
!
+\end_layout
\end_inset
\newline
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
b = !b; /* toggles b */
\newline
\family default
In previous versions, both forms would have toggled the bit.
+\end_layout
-\layout Standard
+\begin_layout Standard
\emph on
<pending: more incompatibilities?>
+\end_layout
-\layout Section
+\begin_layout Section
System Requirements
+\end_layout
-\layout Standard
+\begin_layout Standard
What do you need before you start installation of SDCC? A computer, and
a desire to compute.
The preferred method of installation is to compile SDCC from source using
For Windows some pre-compiled binary distributions are available for your
convenience.
You should have some experience with command line tools and compiler use.
+\end_layout
-\layout Section
+\begin_layout Section
Other Resources
+\end_layout
-\layout Standard
+\begin_layout Standard
The SDCC home page at
\begin_inset LatexCommand \url{http://sdcc.sourceforge.net/}
Some of the other tools (simulator and assembler) included with SDCC contain
their own documentation and can be found in the source distribution.
If you want the latest unreleased software, the complete source package
- is available directly from Subversion on https://svn.sourceforge.net/svnroot/sdcc
-/trunk/sdcc.
+ is available directly from Subversion on https://sdcc.svn.sourceforge.net/svnroot/
+sdcc/trunk/sdcc.
+\end_layout
-\layout Section
+\begin_layout Section
Wishes for the future
+\end_layout
-\layout Standard
+\begin_layout Standard
There are (and always will be) some things that could be done.
Here are some I can think of:
\newline
+\end_layout
-\layout Standard
+\begin_layout Standard
\family typewriter
char KernelFunction3(char p) at 0x340;
\newline
+\end_layout
-\layout Standard
+\begin_layout Standard
\family typewriter
better code banking
.
\newline
+\end_layout
-\layout Chapter
+\begin_layout Chapter
Installing SDCC
\begin_inset LatexCommand \index{Installation}
\end_inset
+\end_layout
-\layout Standard
+\begin_layout Standard
For most users it is sufficient to skip to either section
\begin_inset LatexCommand \ref{sub:Building-SDCC-on-Linux}
(Windows).
More detailed instructions follow below.
+\end_layout
-\layout Section
+\begin_layout Section
Configure Options
\begin_inset LatexCommand \index{Options SDCC configuration}
\end_inset
+\end_layout
-\layout Standard
+\begin_layout Standard
The install paths, search paths and other options are defined when running
'configure'.
The defaults can be overridden by:
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
-prefix see table below
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
-exec_prefix see table below
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
-bindir see table below
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
-datadir see table below
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
-datarootdir see table below
\newline
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
docdir environment variable, see table below
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
include_dir_suffix environment variable, see table below
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
lib_dir_suffix environment variable, see table below
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
sdccconf_h_dir_separator environment variable, either / or
\backslash
therefore a double-backslash is needed there.
\newline
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
-disable-mcs51-port Excludes the Intel mcs51 port
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
-disable-gbz80-port Excludes the Gameboy gbz80 port
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
-disable-z80-port Excludes the z80 port
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
-disable-avr-port Excludes the AVR port
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
-disable-ds390-port Excludes the DS390 port
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
-disable-hc08-port Excludes the HC08 port
+\end_layout
+
+\begin_layout List
+\labelwidthstring 00.00.0000
+-
+\begin_inset ERT
+status collapsed
+
+\begin_layout Standard
+
+
+\backslash
+/
+\end_layout
+
+\end_inset
+
+-disable-pic-port Excludes the PIC14 port
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
--disable-pic-port Excludes the PIC port
+-disable-pic16-port Excludes the PIC16 port
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
-disable-xa51-port Excludes the XA51 port
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
-disable-ucsim Disables configuring and building of ucsim
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
-disable-device-lib Disables automatically building device libraries
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
-disable-packihx Disables building packihx
\newline
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
-enable-doc Build pdf, html and txt files from the lyx sources
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
-enable-libgc Use the Bohem memory allocator.
Lower runtime footprint.
+\end_layout
-\layout Standard
+\begin_layout Standard
Furthermore the environment variables CC, CFLAGS, ...
the tools and their arguments can be influenced.
Please see `configure -
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
--help` and the man/info pages of `configure` for details.
+-help' and the man/info pages of `configure' for details.
\newline
\newline
The names of the
standard libraries STD_LIB, STD_INT_LIB, STD_LONG_LIB, STD_FP_LIB, STD_DS390_LI
B, STD_XA51_LIB and the environment variables SDCC_DIR_NAME, SDCC_INCLUDE_NAME,
- SDCC_LIB_NAME are defined by `configure` too.
+ SDCC_LIB_NAME are defined by `configure' too.
At the moment it's not possible to change the default settings (it was
simply never required).
\newline
are used by the SDCC team to build the official Win32 binaries.
The SDCC team uses Mingw32 to build the official Windows binaries, because
it's
+\end_layout
-\layout Enumerate
+\begin_layout Enumerate
open source,
+\end_layout
-\layout Enumerate
+\begin_layout Enumerate
a gcc compiler and last but not least
+\end_layout
-\layout Enumerate
-the binaries can be built by cross compiling on Sourceforge's compile farm.
+\begin_layout Enumerate
+the binaries can be built by cross compiling on SDCC Distributed Compile
+ Farm.
+\end_layout
-\layout Standard
+\begin_layout Standard
See the examples, how to pass the Win32 settings to 'configure'.
The other Win32 builds using Borland, VC or whatever don't use 'configure',
but a header file sdcc_vc_in.h is the same as sdccconf.h built by 'configure'
These defaults are:
\newline
+\end_layout
-\layout Standard
+\begin_layout Standard
\align center
\begin_inset Tabular
<lyxtabular version="3" rows="9" columns="3">
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
Variable
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
default
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
Win32 builds
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\emph on
PREFIX
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
/usr/local
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\backslash
sdcc
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\emph on
EXEC_PREFIX
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\emph on
$PREFIX
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\emph on
$PREFIX
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\emph on
BINDIR
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\emph on
$EXEC_PREFIX
\emph default
/bin
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\emph on
$EXEC_PREFIX
\backslash
bin
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\emph on
DATADIR
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\emph on
$DATAROOTDIR
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\emph on
$DATAROOTDIR
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\emph on
DATAROOTDIR
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\emph on
$PREFIX
\emph default
/share
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\emph on
$PREFIX
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\emph on
DOCDIR
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\emph on
$DATAROOTDIR
\emph default
/sdcc/doc
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\emph on
$DATAROOTDIR
\backslash
doc
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\emph on
INCLUDE_DIR_SUFFIX
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
sdcc/include
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
include
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\emph on
LIB_DIR_SUFFIX
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
sdcc/lib
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
lib
+\end_layout
\end_inset
</cell>
\newline
+\end_layout
-\layout Standard
+\begin_layout Standard
\noindent
'configure' also computes relative paths.
This is needed for full relocatability of a binary package and to complete
search paths (see section search paths below):
\newline
+\end_layout
-\layout Standard
+\begin_layout Standard
\align center
\begin_inset Tabular
<lyxtabular version="3" rows="4" columns="3">
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
Variable (computed)
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
default
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
Win32 builds
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\emph on
BIN2DATA_DIR
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
../share
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
..
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\emph on
PREFIX2BIN_DIR
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
bin
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
bin
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\emph on
PREFIX2DATA_DIR
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
share/sdcc
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
+\end_layout
\end_inset
</cell>
\newline
+\end_layout
-\layout Standard
+\begin_layout Standard
\noindent
Examples:
+\end_layout
-\layout LyX-Code
+\begin_layout LyX-Code
./configure
\newline
./configure -
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
\newline
./configure -
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
-disable-avr-port -
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
-disable-xa51-port
+\end_layout
-\layout Standard
+\begin_layout Standard
To cross compile on linux for Mingw32 (see also 'sdcc/support/scripts/sdcc_mingw
32'):
+\end_layout
-\layout LyX-Code
+\begin_layout LyX-Code
./configure
\backslash
\newline
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
\newline
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
\newline
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
\newline
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
\newline
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
-build=unknown-unknown-linux-gnu
+\end_layout
-\layout Standard
+\begin_layout Standard
To
\begin_inset Quotes sld
\end_inset
compile on Cygwin for Mingw32 (see also sdcc/support/scripts/sdcc_cygwin_mingw32
):
+\end_layout
-\layout LyX-Code
+\begin_layout LyX-Code
./configure -C
\backslash
\newline
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
\newline
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
\end_inset
+\end_layout
-\layout Standard
+\begin_layout Standard
'configure' is quite slow on Cygwin (at least on windows before Win2000/XP).
The option '-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
-C' turns on caching, which gives a little bit extra speed.
However if options are changed, it can be necessary to delete the config.cache
file.
+\end_layout
-\layout Section
+\begin_layout Section
Install paths
-\added_space_bottom medskip
\begin_inset LatexCommand \label{sub:Install-paths}
\end_inset
\end_inset
+\end_layout
+
+\begin_layout Standard
+\begin_inset VSpace medskip
+\end_inset
+
+\end_layout
-\layout Standard
+\begin_layout Standard
\align center
\begin_inset Tabular
<lyxtabular version="3" rows="5" columns="4">
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\series bold
Description
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\series bold
Path
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\series bold
Default
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\series bold
Win32 builds
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
Binary files*
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\emph on
$EXEC_PREFIX
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
/usr/local/bin
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\backslash
sdcc
\backslash
bin
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
Include files
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\emph on
$DATADIR/ $INCLUDE_DIR_SUFFIX
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
/usr/local/share/sdcc/include
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\backslash
sdcc
\backslash
include
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
Library file**
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\emph on
$DATADIR/$LIB_DIR_SUFFIX
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
/usr/local/share/sdcc/lib
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\backslash
sdcc
\backslash
lib
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
Documentation
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\emph on
$DOCDIR
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
/usr/local/share/sdcc/doc
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\backslash
sdcc
\backslash
doc
+\end_layout
\end_inset
</cell>
\end_inset
+\end_layout
-\layout Verse
+\begin_layout Verse
\size footnotesize
*compiler, preprocessor, assembler, and linker
\shape default
is auto-appended by the compiler, e.g.
small, large, z80, ds390 etc
+\end_layout
-\layout Standard
+\begin_layout Standard
\noindent
-The install paths can still be changed during `make install` with e.g.:
+The install paths can still be changed during `make install' with e.g.:
+\end_layout
-\layout LyX-Code
+\begin_layout LyX-Code
make install prefix=$(HOME)/local/sdcc
+\end_layout
-\layout Standard
+\begin_layout Standard
Of course this doesn't change the search paths compiled into the binaries.
\newline
\end_inset
:
+\end_layout
-\layout LyX-Code
+\begin_layout LyX-Code
make install DESTDIR=$(HOME)/sdcc.rpm/
+\end_layout
-\layout Standard
+\begin_layout Standard
Please note that DESTDIR must have a trailing slash!
+\end_layout
-\layout Section
+\begin_layout Section
Search Paths
\begin_inset LatexCommand \label{sub:Search-Paths}
\end_inset
+\end_layout
-\layout Standard
+\begin_layout Standard
Some search paths or parts of them are determined by configure variables
(in
\emph on
Binary files (preprocessor, assembler and linker)
\newline
+\end_layout
-\layout Standard
+\begin_layout Standard
\align center
\begin_inset Tabular
<lyxtabular version="3" rows="4" columns="3">
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
Search path
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
default
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
Win32 builds
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
$SDCC_HOME/
\emph on
$PPREFIX2BIN_DIR
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
$SDCC_HOME/bin
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
$SDCC_HOME
\backslash
bin
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
Path of argv[0] (if available)
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
Path of argv[0]
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
Path of argv[0]
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
$PATH
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
$PATH
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
$PATH
+\end_layout
\end_inset
</cell>
\newline
+\end_layout
-\layout Standard
+\begin_layout Standard
\noindent
2.
Include files
\newline
+\end_layout
-\layout Standard
+\begin_layout Standard
\align center
\begin_inset Tabular
<lyxtabular version="3" rows="6" columns="3">
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
Search path
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
default
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
Win32 builds
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
-I dir
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
-I dir
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
-I dir
+\end_layout
\end_inset
</cell>
<cell alignment="left" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
$SDCC_INCLUDE
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
$SDCC_INCLUDE
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
$SDCC_INCLUDE
+\end_layout
\end_inset
</cell>
<cell alignment="left" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
$SDCC_HOME/
\newline
$PREFIX2DATA_DIR/
\newline
$INCLUDE_DIR_SUFFIX
+\end_layout
\end_inset
</cell>
<cell alignment="left" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
$SDCC_ HOME/
\newline
share/sdcc/
\newline
include
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
$SDCC_HOME
\backslash
include
+\end_layout
\end_inset
</cell>
<cell alignment="left" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
path(argv[0])/
\newline
\emph on
$INCLUDE_DIR_SUFFIX
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
path(argv[0])/
\newline
../sdcc/include
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-
-
-\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
-\begin_inset Text
-
-\layout Standard
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Standard
path(argv[0])
\backslash
..
\backslash
include
+\end_layout
\end_inset
</cell>
<cell alignment="left" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\emph on
$DATADIR/
\emph on
$INCLUDE_DIR_SUFFIX
+\end_layout
\end_inset
</cell>
<cell alignment="left" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
/usr/local/share/sdcc/
\newline
include
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
(not on Win32)
+\end_layout
\end_inset
</cell>
\newline
+\end_layout
-\layout Standard
+\begin_layout Standard
\noindent
The option -
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
Library files
\newline
+\end_layout
-\layout Standard
+\begin_layout Standard
With the exception of
\begin_inset Quotes sld
\end_inset
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
\newline
+\end_layout
-\layout Standard
+\begin_layout Standard
\align center
\begin_inset Tabular
<lyxtabular version="3" rows="6" columns="3">
<cell alignment="left" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
Search path
+\end_layout
\end_inset
</cell>
<cell alignment="left" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
default
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
Win32 builds
+\end_layout
\end_inset
</cell>
<cell alignment="left" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
-L dir
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
-L dir
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
-L dir
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
$SDCC_LIB/
\newline
\emph on
<model>
+\end_layout
\end_inset
</cell>
<cell alignment="left" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
$SDCC_LIB/
\newline
\emph on
<model>
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
$SDCC_LIB
\backslash
\emph on
<model>
+\end_layout
\end_inset
</cell>
<cell alignment="left" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
$SDCC_HOME/
\newline
$PREFIX2DATA_DIR/
\newline
$LIB_DIR_SUFFIX/<model>
+\end_layout
\end_inset
</cell>
<cell alignment="left" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
$SDCC_HOME/
\newline
share/sdcc/
lib/
\emph on
<model>
+\end_layout
\end_inset
</cell>
<cell alignment="left" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
$SDCC_HOME
\backslash
lib
\newline
<model>
+\end_layout
\end_inset
</cell>
<cell alignment="left" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
path(argv[0])/
\newline
\emph on
$LIB_DIR_SUFFIX/<model>
+\end_layout
\end_inset
</cell>
<cell alignment="left" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
path(argv[0])/
\newline
../sdcc/lib/
\emph on
<model>
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-
-
-\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
-\begin_inset Text
-
-\layout Standard
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Standard
path(argv[0])
\backslash
\emph on
<model>
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\emph on
$DATADIR/
\newline
$LIB_DIR_SUFFIX/<model>
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
/usr/local/share/sdcc/
\newline
lib/
\emph on
<model>
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
(not on Win32)
+\end_layout
\end_inset
</cell>
\newline
+\end_layout
-\layout Standard
-\begin_inset Note
-collapsed true
+\begin_layout Standard
+\begin_inset Note Note
+status collapsed
-\layout Standard
+\begin_layout Standard
Don't delete any of the stray spaces in the table above without checking
the HTML output (last line)!
+\end_layout
\end_inset
+\end_layout
-\layout Standard
-\SpecialChar ~
+\begin_layout Standard
+\InsetSpace ~
\newline
The option -
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
-nostdlib disables the last two search paths.
+\end_layout
-\layout Section
+\begin_layout Section
Building SDCC
\begin_inset LatexCommand \index{Building SDCC}
\end_inset
+\end_layout
-\layout Subsection
+\begin_layout Subsection
Building SDCC on Linux
\begin_inset LatexCommand \label{sub:Building-SDCC-on-Linux}
\end_inset
+\end_layout
-\layout Enumerate
+\begin_layout Enumerate
\series medium
Download the source package
\series default
- either from the SDCC Subversion repository or from the nightly snapshots
+ either from the SDCC Subversion repository or from snapshot builds
\series medium
, it will be named something like sdcc
\series default
-.src
+-src
\series medium
-.t
+-yyyymmdd-rrrr.t
\series default
ar.
\series medium
-gz
+bz2
\series default
\begin_inset LatexCommand \url{http://sdcc.sourceforge.net/snap.php}
\end_inset
.
+\end_layout
-\layout Enumerate
+\begin_layout Enumerate
\series medium
Bring up a command line terminal, such as xterm.
+\end_layout
-\layout Enumerate
+\begin_layout Enumerate
\series medium
Unpack the file using a command like:
\family sans
\series bold
-"tar -xvzf sdcc.src.tar.gz
+"tar -xvzf sdcc-src-yyyymmdd-rrrr.tar.bz2
+\begin_inset Quotes srd
+\end_inset
+
+
\family default
-\series default
-"
\series medium
, this will create a sub-directory called sdcc with all of the sources.
+\end_layout
-\layout Enumerate
+\begin_layout Enumerate
Change directory into the main SDCC directory, for example type:
\family sans
\series bold
"cd sdcc
\series default
".
+\end_layout
-\layout Enumerate
+\begin_layout Enumerate
\series medium
Type
\series default
".
This configures the package for compilation on your system.
+\end_layout
-\layout Enumerate
+\begin_layout Enumerate
\series medium
Type
\series default
All of the source packages will compile, this can take a while.
+\end_layout
-\layout Enumerate
+\begin_layout Enumerate
\series medium
Type
\end_inset
.
+\end_layout
-\layout Subsection
-Building SDCC on OSX 2.x
+\begin_layout Subsection
+Building SDCC on Mac OS X
+\end_layout
-\layout Standard
+\begin_layout Standard
Follow the instruction for Linux.
\newline
\newline
-On OSX 2.x it was reported, that the default
- gcc (version 3.1 20020420 (prerelease)) fails to compile SDCC.
+On Mac OS X 10.2.x it was reported, that the
+ default gcc (version 3.1 20020420 (prerelease)) fails to compile SDCC.
Fortunately there's also gcc 2.9.x installed, which works fine.
This compiler can be selected by running 'configure' with:
+\end_layout
-\layout LyX-Code
+\begin_layout LyX-Code
./configure CC=gcc2 CXX=g++2
+\end_layout
+
+\begin_layout Standard
+Universal (ppc and i386) binaries can be produced on Mac OS X 10.4.x with
+ Xcode.
+ Run 'configure' with:
+\end_layout
+
+\begin_layout LyX-Code
+./configure
+\backslash
-\layout Subsection
+\end_layout
+
+\begin_layout LyX-Code
+LDFLAGS="-Wl,-syslibroot,/Developer/SDKs/MacOSX10.4u.sdk -arch i386 -arch
+ ppc"
+\backslash
+
+\end_layout
+
+\begin_layout LyX-Code
+CXXFLAGS = "-O2 -isysroot /Developer/SDKs/MacOSX10.4u.sdk -arch i386 -arch
+ ppc"
+\backslash
+
+\end_layout
+
+\begin_layout LyX-Code
+CFLAGS = "-O2 -isysroot /Developer/SDKs/MacOSX10.4u.sdk -arch i386 -arch ppc"
+\end_layout
+
+\begin_layout Subsection
Cross compiling SDCC on Linux for Windows
+\end_layout
-\layout Standard
+\begin_layout Standard
With the Mingw32 gcc cross compiler it's easy to compile SDCC for Win32.
See section 'Configure Options'.
+\end_layout
-\layout Subsection
+\begin_layout Subsection
Building SDCC using Cygwin and Mingw32
+\end_layout
-\layout Standard
+\begin_layout Standard
For building and installing a Cygwin executable follow the instructions
for Linux.
\newline
Some packages are selected by default, others will be automatically selected
because of dependencies with the manually selected packages.
Never deselect these packages!
+\end_layout
-\layout Itemize
+\begin_layout Itemize
flex
+\end_layout
-\layout Itemize
+\begin_layout Itemize
bison
+\end_layout
-\layout Itemize
+\begin_layout Itemize
gcc ; version 3.x is fine, no need to use the old 2.9x
+\end_layout
-\layout Itemize
+\begin_layout Itemize
binutils ; selected with gcc
+\end_layout
-\layout Itemize
+\begin_layout Itemize
make
+\end_layout
-\layout Itemize
+\begin_layout Itemize
rxvt ; a nice console, which makes life much easier under windoze (see below)
+\end_layout
-\layout Itemize
+\begin_layout Itemize
man ; not really needed for building SDCC, but you'll miss it sooner or
later
+\end_layout
-\layout Itemize
+\begin_layout Itemize
less ; not really needed for building SDCC, but you'll miss it sooner or
later
+\end_layout
-\layout Itemize
+\begin_layout Itemize
svn ; only if you use Subversion access
+\end_layout
-\layout Standard
+\begin_layout Standard
If you want to develop something you'll need:
+\end_layout
-\layout Itemize
+\begin_layout Itemize
python ; for the regression tests
+\end_layout
-\layout Itemize
+\begin_layout Itemize
gdb ; the gnu debugger, together with the nice GUI
\begin_inset Quotes sld
\end_inset
\end_inset
+\end_layout
-\layout Itemize
+\begin_layout Itemize
openssh ; to access the CF or commit changes
+\end_layout
-\layout Itemize
+\begin_layout Itemize
autoconf and autoconf-devel ; if you want to fight with 'configure', don't
use autoconf-stable!
+\end_layout
-\layout Standard
+\begin_layout Standard
rxvt is a nice console with history.
Replace in your cygwin.bat the line
+\end_layout
-\layout LyX-Code
+\begin_layout LyX-Code
bash -
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
-login -i
+\end_layout
-\layout Standard
+\begin_layout Standard
with (one line):
+\end_layout
-\layout LyX-Code
+\begin_layout LyX-Code
rxvt -sl 1000 -fn "Lucida Console-12" -sr -cr red
+\end_layout
-\layout LyX-Code
+\begin_layout LyX-Code
-bg black -fg white -geometry 100x65 -e bash -
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
-login
+\end_layout
-\layout Standard
+\begin_layout Standard
Text selected with the mouse is automatically copied to the clipboard, pasting
works with shift-insert.
\newline
\end_inset
is too long, you can change it with e.g.
+\end_layout
-\layout LyX-Code
+\begin_layout LyX-Code
mount -s -u -c /mnt
+\end_layout
-\layout Standard
+\begin_layout Standard
SDCC sources use the unix line ending LF.
Life is much easier, if you store the source tree on a drive which is mounted
in binary mode.
Although a tabulator spacing of 8 is a sensible choice for programmers
(it's a power of 2 and allows to display 8/16 bit signed variables without
loosing columns) the plan is to move towards using only spaces in the source.
+\end_layout
-\layout Subsection
+\begin_layout Subsection
Building SDCC Using Microsoft Visual C++ 6.0/NET (MSVC)
+\end_layout
-\layout Standard
+\begin_layout Standard
\series medium
Download the source package
\series default
either from the SDCC Subversion repository or from the
-\begin_inset LatexCommand \url[nightly snapshots]{http://sdcc.sourceforge.net/snap.php}
+\begin_inset LatexCommand \url[snapshot builds]{http://sdcc.sourceforge.net/snap.php}
\end_inset
\series medium
, it will be named something like sdcc
\series default
-.src
+-src
\series medium
-.tgz.
+-yyyymmdd-rrrr.tar.bz2.
\series default
SDCC is distributed with all the projects, workspaces, and files you need
Now you have to install the utilities and setup MSVC so it can locate the
required programs.
Here there are two alternatives (choose one!):
+\end_layout
-\layout Enumerate
+\begin_layout Enumerate
The easy way:
\newline
\newline
(As a side effect, you get a bunch of Unix utilities that
could be useful, such as diff and patch.)
+\end_layout
-\layout Enumerate
+\begin_layout Enumerate
A more compact way:
\newline
\backslash
' and add these lines:
\newline
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
set BISON_SIMPLE=C:
\backslash
util
\backslash
bison.simple
\newline
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
set BISON_HAIRY=C:
\backslash
util
\backslash
bison.hairy
\newline
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
_bison %1 %2 %3 %4 %5 %6 %7 %8 %9
\newline
\backslash
Tools'.
So you don't have to execute step 'e' :)
+\end_layout
-\layout Standard
+\begin_layout Standard
That is it.
Open 'sdcc.dsw' in Visual Studio, click 'build all', when it finishes copy
the executables from sdcc
bin_vc to sdcc
\backslash
bin, and you can compile using SDCC.
+\end_layout
-\layout Subsection
+\begin_layout Subsection
Building SDCC Using Borland
+\end_layout
-\layout Enumerate
+\begin_layout Enumerate
From the sdcc directory, run the command "make -f Makefile.bcc".
This should regenerate all the .exe files in the bin directory except for
SDCDB and ucSim.
+\end_layout
-\layout Enumerate
+\begin_layout Enumerate
If you modify any source files and need to rebuild, be aware that the dependenci
es may not be correctly calculated.
The safest option is to delete all .obj files and run the build again.
\family default
\series default
from the sdcc directory.
+\end_layout
-\layout Subsection
+\begin_layout Subsection
Windows Install Using a ZIP Package
+\end_layout
-\layout Enumerate
+\begin_layout Enumerate
Download the binary zip package from
\begin_inset LatexCommand \url{http://sdcc.sf.net/snap.php}
sdcc
\backslash
lib for the include and libraries.
+\end_layout
-\layout Enumerate
+\begin_layout Enumerate
Adjust your environment variable PATH to include the location of the bin
directory or start sdcc using the full path.
+\end_layout
-\layout Subsection
+\begin_layout Subsection
Windows Install Using the Setup Program
\begin_inset LatexCommand \label{sub:Windows-Install}
\end_inset
+\end_layout
-\layout Standard
+\begin_layout Standard
Download the setup program
\emph on
sdcc-x.y.z-setup.exe
and execute it.
A windows typical installer will guide you through the installation process.
+\end_layout
-\layout Subsection
+\begin_layout Subsection
VPATH
\begin_inset LatexCommand \index{VPATH}
\end_inset
feature
+\end_layout
-\layout Standard
+\begin_layout Standard
SDCC supports the VPATH feature provided by configure and make.
It allows to separate the source and build trees.
Here's an example:
+\end_layout
-\layout Standard
-
-\family typewriter
-cd ~\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\begin_layout Standard
+
+\family typewriter
+cd ~\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
# cd $HOME
+\end_layout
-\layout Standard
+\begin_layout Standard
\family typewriter
-tar -xzf sdcc.src.tar.gz\SpecialChar ~
+tar -xzf sdcc.src.tar.gz\InsetSpace ~
# extract source to directory sdcc
+\end_layout
-\layout Standard
+\begin_layout Standard
\family typewriter
-mkdir sdcc.build\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+mkdir sdcc.build\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
# put output in sdcc.build
+\end_layout
-\layout Standard
+\begin_layout Standard
\family typewriter
cd sdcc.build
+\end_layout
-\layout Standard
+\begin_layout Standard
\family typewriter
-../sdcc/configure\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+../sdcc/configure\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
# configure is doing all the magic!
+\end_layout
-\layout Standard
+\begin_layout Standard
\family typewriter
make
+\end_layout
-\layout Standard
+\begin_layout Standard
\noindent
That's it!
\series bold
generated files are not scattered between the source files.
And the best thing is: if you want to change a file you can leave the original
file untouched in the source directory.
- Simply copy it to the build directory, edit it, enter `make clean`, `rm
- Makefile.dep` and `make`.
+ Simply copy it to the build directory, edit it, enter `make clean', `rm
+ Makefile.dep' and `make'.
\series bold
make
\series default
will do the rest for you!
+\end_layout
-\layout Section
+\begin_layout Section
Building the Documentation
+\end_layout
-\layout Standard
+\begin_layout Standard
Add -
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
\end_inset
.
+\end_layout
-\layout Section
+\begin_layout Section
Reading the Documentation
\begin_inset LatexCommand \index{Documentation}
\end_inset
+\end_layout
-\layout Standard
+\begin_layout Standard
Currently reading the document in pdf format is recommended, as for unknown
reason the hyperlinks are working there whereas in the html version they
are not
\begin_inset Foot
-collapsed false
+status open
-\layout Standard
+\begin_layout Standard
If you should know why please drop us a note
+\end_layout
\end_inset
\newline
This documentation is in some aspects different from a commercial documentation:
+\end_layout
-\layout Itemize
+\begin_layout Itemize
It tries to document SDCC for several processor architectures in one document
(commercially these probably would be separate documents/products).
This document
currently matches SDCC for mcs51 and DS390 best and does give too few informati
on about f.e.
Z80, PIC14, PIC16 and HC08.
+\end_layout
-\layout Itemize
+\begin_layout Itemize
There are many references pointing away from this documentation.
Don't let this distract you.
If there f.e.
we expect you to have a quick look there and come back.
If you read this you are on the right track.
+\end_layout
-\layout Itemize
+\begin_layout Itemize
Some sections attribute more space to problems, restrictions and warnings
than to the solution.
+\end_layout
-\layout Itemize
+\begin_layout Itemize
The installation section and the section about the debugger is intimidating.
+\end_layout
-\layout Itemize
+\begin_layout Itemize
There are still lots of typos and there are more different writing styles
than pictures.
+\end_layout
-\layout Section
+\begin_layout Section
Testing the SDCC Compiler
\begin_inset LatexCommand \label{sec:Testing-the-SDCC}
\end_inset
+\end_layout
-\layout Standard
+\begin_layout Standard
The first thing you should do after installing your SDCC compiler is to
see if it runs.
Type
\series bold
"sdcc -
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
\family typewriter
SDCC : mcs51/z80/avr/ds390/pic16/pic14/ds400/hc08 2.5.6 #4169 (May 8 2006)
(UNIX)
+\end_layout
-\layout Standard
+\begin_layout Standard
If it doesn't run, or gives a message about not finding sdcc program, then
you need to check over your installation.
Make sure that the sdcc bin directory is in your executable search path
\end_inset
-\SpecialChar ~
+\InsetSpace ~
\series medium
Install trouble-shooting for suggestions
ASCII
\series medium
editor:
+\end_layout
-\layout Verse
+\begin_layout Verse
\family typewriter
char test;
\newline
void main(void) {
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
test=0;
\newline
}
+\end_layout
-\layout Standard
+\begin_layout Standard
\series medium
Compile this using the following command:
\end_inset
-\SpecialChar ~
+\InsetSpace ~
\series medium
Install trouble-shooting for suggestions).
\series medium
header files and libraries.
Edit test.c and change it to the following:
+\end_layout
-\layout Verse
+\begin_layout Verse
\family typewriter
#include <string.h>
\newline
void main(void) {
\newline
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
strcpy(str1, "testing");
\newline
}
+\end_layout
-\layout Standard
+\begin_layout Standard
\series medium
Compile this by typing
\end_inset
-\SpecialChar ~
+\InsetSpace ~
\series medium
Install trouble-shooting section for suggestions).
\series bold
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
\end_inset
to find exactly where SDCC is looking for the include and lib files.
+\end_layout
-\layout Section
+\begin_layout Section
Install Trouble-shooting
\begin_inset LatexCommand \label{sub:Install-Trouble-shooting}
\end_inset
+\end_layout
-\layout Subsection
+\begin_layout Subsection
If SDCC does not build correctly
+\end_layout
-\layout Standard
+\begin_layout Standard
A thing to try is starting from scratch by unpacking the .tgz source package
again in an empty directory.
Configure it like:
If anything goes wrong, you can review the log files to locate the problem.
Or a relevant part of this can be attached to an email that could be helpful
when requesting help from the mailing list.
+\end_layout
-\layout Subsection
+\begin_layout Subsection
What the
\begin_inset Quotes sld
\end_inset
\end_inset
does
+\end_layout
-\layout Standard
+\begin_layout Standard
The
\begin_inset Quotes sld
\end_inset
to ensure the source package compiles on your system.
It will take a few minutes to run, and will compile a few tests to determine
what compiler features are installed.
+\end_layout
-\layout Subsection
+\begin_layout Subsection
What the
\begin_inset Quotes sld
\end_inset
\end_inset
does
+\end_layout
-\layout Standard
+\begin_layout Standard
This runs the GNU make tool, which automatically compiles all the source
packages into the final installed binary executables.
+\end_layout
-\layout Subsection
+\begin_layout Subsection
What the
\begin_inset Quotes sld
\end_inset
\end_inset
command does.
+\end_layout
-\layout Standard
+\begin_layout Standard
This will install the compiler, other executables libraries and include
files into the appropriate directories.
See sections
\end_inset
-,\SpecialChar ~
+,\InsetSpace ~
\begin_inset LatexCommand \ref{sub:Search-Paths}
\end_inset
-\SpecialChar ~
+\InsetSpace ~
about install and search paths.
\newline
On most systems you will need super-user privilege
s to do this.
+\end_layout
-\layout Section
+\begin_layout Section
Components of SDCC
+\end_layout
-\layout Standard
+\begin_layout Standard
SDCC is not just a compiler, but a collection of tools by various developers.
These include linkers, assemblers, simulators and other components.
Here is a summary of some of the components.
\newline
In <installdir>/bin:
+\end_layout
-\layout Itemize
+\begin_layout Itemize
sdcc - The compiler.
+\end_layout
-\layout Itemize
+\begin_layout Itemize
sdcpp - The C preprocessor.
+\end_layout
-\layout Itemize
+\begin_layout Itemize
asx8051 - The assembler for 8051 type processors.
+\end_layout
-\layout Itemize
+\begin_layout Itemize
as-z80
\series bold
,
\series default
as-gbz80 - The Z80 and GameBoy Z80 assemblers.
+\end_layout
-\layout Itemize
+\begin_layout Itemize
aslink -The linker for 8051 type processors.
+\end_layout
-\layout Itemize
+\begin_layout Itemize
link-z80
\series bold
,
\series default
link-gbz80 - The Z80 and GameBoy Z80 linkers.
+\end_layout
-\layout Itemize
+\begin_layout Itemize
s51 - The ucSim 8051 simulator.
+\end_layout
-\layout Itemize
+\begin_layout Itemize
sdcdb - The source debugger.
+\end_layout
-\layout Itemize
+\begin_layout Itemize
packihx - A tool to pack (compress) Intel hex files.
+\end_layout
-\layout Standard
+\begin_layout Standard
In <installdir>/share/sdcc/include
+\end_layout
-\layout Itemize
+\begin_layout Itemize
the include files
+\end_layout
-\layout Standard
+\begin_layout Standard
In <installdir>/share/sdcc/lib
+\end_layout
-\layout Itemize
+\begin_layout Itemize
the subdirs src and small, large, z80, gbz80 and ds390 with the precompiled
relocatables.
+\end_layout
-\layout Standard
+\begin_layout Standard
In <installdir>/share/sdcc/doc
+\end_layout
-\layout Itemize
+\begin_layout Itemize
the documentation
+\end_layout
-\layout Standard
+\begin_layout Standard
As development for other processors proceeds, this list will expand to include
executables to support processors like AVR, PIC, etc.
+\end_layout
-\layout Subsection
+\begin_layout Subsection
sdcc - The Compiler
+\end_layout
-\layout Standard
+\begin_layout Standard
This is the actual compiler, it in turn uses the c-preprocessor and invokes
the assembler and linkage editor.
+\end_layout
-\layout Subsection
+\begin_layout Subsection
sdcpp - The C-Preprocessor
+\end_layout
-\layout Standard
+\begin_layout Standard
The preprocessor
\begin_inset LatexCommand \index{sdcpp (preprocessor)}
.
The C preprocessor is used to pull in #include sources, process #ifdef
statements, #defines and so on.
+\end_layout
-\layout Subsection
+\begin_layout Subsection
as
\emph on
xxxx
xxx
\emph default
- The Assemblers and Linkage Editors
+\end_layout
-\layout Standard
+\begin_layout Standard
This is retargettable assembler & linkage editor, it was developed by Alan
Baldwin.
John Hartman created the version for 8051, and I (Sandeep) have made some
enhancements and bug fixes for it to work properly with SDCC.
+\end_layout
-\layout Subsection
+\begin_layout Subsection
s51 - The Simulator
+\end_layout
-\layout Standard
+\begin_layout Standard
S51
\begin_inset LatexCommand \index{s51}
\end_inset
- is a freeware, opensource simulator developed by Daniel Drotos.
+ is a free open source simulator developed by Daniel Drotos.
The simulator is built as part of the build process.
For more information visit Daniel's web site at:
\begin_inset LatexCommand \url{http://mazsola.iit.uni-miskolc.hu/~drdani/embedded/s51}
.
It currently supports the core mcs51, the Dallas DS80C390 and the Phillips
XA51 family.
+\end_layout
-\layout Subsection
+\begin_layout Subsection
sdcdb - Source Level Debugger
+\end_layout
-\layout Standard
+\begin_layout Standard
SDCDB
\begin_inset LatexCommand \index{SDCDB (debugger)}
\end_inset
, but can be easily changed to use other simulators.
+\end_layout
-\layout Chapter
+\begin_layout Chapter
Using SDCC
+\end_layout
-\layout Section
+\begin_layout Section
Compiling
+\end_layout
-\layout Subsection
+\begin_layout Subsection
Single Source File Projects
+\end_layout
-\layout Standard
+\begin_layout Standard
For single source file 8051 projects the process is very simple.
Compile your programs with the following command
\family sans
\series default
This will compile, assemble and link your source file.
Output files are as follows:
+\end_layout
-\layout Itemize
+\begin_layout Itemize
sourcefile.asm
\begin_inset LatexCommand \index{<file>.asm}
\end_inset
file created by the compiler
+\end_layout
-\layout Itemize
+\begin_layout Itemize
sourcefile.lst
\begin_inset LatexCommand \index{<file>.lst}
\end_inset
file created by the Assembler
+\end_layout
-\layout Itemize
+\begin_layout Itemize
sourcefile.rst
\begin_inset LatexCommand \index{<file>.rst}
\end_inset
file updated with linkedit information, created by linkage editor
+\end_layout
-\layout Itemize
+\begin_layout Itemize
sourcefile.sym
\begin_inset LatexCommand \index{<file>.sym}
\end_inset
for the sourcefile, created by the assembler
+\end_layout
-\layout Itemize
+\begin_layout Itemize
sourcefile.rel
\begin_inset LatexCommand \index{<file>.rel}
\end_inset
created by the assembler, input to Linkage editor
+\end_layout
-\layout Itemize
+\begin_layout Itemize
sourcefile.map
\begin_inset LatexCommand \index{<file>.map}
\end_inset
for the load module, created by the Linker
+\end_layout
-\layout Itemize
+\begin_layout Itemize
sourcefile.mem
\begin_inset LatexCommand \index{<file>.mem}
\end_inset
- A file with a summary of the memory usage
+\end_layout
-\layout Itemize
+\begin_layout Itemize
sourcefile.ihx
\begin_inset LatexCommand \index{<file>.ihx}
with -
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
\end_inset
+
+\begin_inset Note Note
+status collapsed
+
+\begin_layout Standard
+hyperlinks needed
+\end_layout
+
+\end_inset
+
+ - see also section
+\begin_inset LatexCommand \vref{sub:Postprocessing-the-Intel}
+
+\end_inset
+
).
Both formats are documented in the documentation of srecord
\begin_inset LatexCommand \index{srecord (bin, hex, ... tool)}
\end_inset
+\end_layout
-\layout Itemize
+\begin_layout Itemize
sourcefile.adb
\begin_inset LatexCommand \index{<file>.adb}
- An intermediate file containing debug information needed to create the
.cdb file (with -
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
\end_inset
)
+\end_layout
-\layout Itemize
+\begin_layout Itemize
sourcefile.cdb
\begin_inset LatexCommand \index{<file>.cdb}
- An optional file (with -
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
-debug) containing debug information.
The format is documented in cdbfileformat.pdf
+\end_layout
-\layout Itemize
+\begin_layout Itemize
sourcefile.
- (no extension)
\begin_inset LatexCommand \index{<file> (no extension)}
file containing debug information (generated with option -
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
\emph on
f
\emph default
-ormat is commonly used by third party tools (debuggers
+ormat is a subformat of the OMF51 format and is commonly used by third party
+ tools (debuggers
\begin_inset LatexCommand \index{Debugger}
\end_inset
-, simulators, emulators)
+, simulators, emulators).
+\end_layout
-\layout Itemize
+\begin_layout Itemize
sourcefile.dump*
\begin_inset LatexCommand \index{<file>.dump*}
- Dump file to debug the compiler it self (generated with option -
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
\end_inset
-\SpecialChar ~
+\InsetSpace ~
and section
\begin_inset LatexCommand \ref{sub:The-anatomy-of}
\end_inset
-\SpecialChar ~
+\InsetSpace ~
\begin_inset Quotes sld
\end_inset
\end_inset
).
+\end_layout
-\layout Subsection
+\begin_layout Subsection
Postprocessing the Intel Hex
\begin_inset LatexCommand \index{Intel hex format}
\end_inset
file
+\begin_inset LatexCommand \label{sub:Postprocessing-the-Intel}
+
+\end_inset
-\layout Standard
+
+\end_layout
+
+\begin_layout Standard
In most cases this won't be needed but the Intel Hex file
\begin_inset LatexCommand \index{<file>.ihx}
\family sans
\series bold
-srec_cat\SpecialChar ~
-\SpecialChar ~
-sourcefile.ihx -intel\SpecialChar ~
-\SpecialChar ~
+srec_cat\InsetSpace ~
+\InsetSpace ~
+sourcefile.ihx -intel\InsetSpace ~
+\InsetSpace ~
-o sourcefile.hex -intel
\newline
\series default
An example for a more complex command line
\begin_inset Foot
-collapsed false
+status open
-\layout Standard
+\begin_layout Standard
the command backfills
\begin_inset LatexCommand \index{backfill unused memory}
0x1212
\family default
(where an emergency routine could sit).
+\end_layout
\end_inset
\family sans
\series bold
\size footnotesize
-srec_cat\SpecialChar ~
-sourcefile.ihx -intel\SpecialChar ~
-\SpecialChar ~
--fill 0x12 0x0000 0xfffe\SpecialChar ~
+srec_cat\InsetSpace ~
+sourcefile.ihx -intel\InsetSpace ~
+\InsetSpace ~
+-fill 0x12 0x0000 0xfffe\InsetSpace ~
-little-endian-checksum-nega
-tive 0xfffe 0x02 0x02\SpecialChar ~
-\SpecialChar ~
+tive 0xfffe 0x02 0x02\InsetSpace ~
+\InsetSpace ~
-o sourcefile.hex -intel
\size default
\end_inset
.
+\end_layout
-\layout Subsection
+\begin_layout Subsection
Projects with Multiple Source Files
+\end_layout
-\layout Standard
+\begin_layout Standard
SDCC can compile only ONE file at a time.
Let us for example assume that you have a project containing the following
files:
\family sans
\series bold
-sdcc\SpecialChar ~
--c\SpecialChar ~
+sdcc\InsetSpace ~
+-c\InsetSpace ~
foo1.c
\family default
\series default
\family sans
\series bold
\size default
-sdcc\SpecialChar ~
--c\SpecialChar ~
+sdcc\InsetSpace ~
+-c\InsetSpace ~
foo2.c
\family default
\series default
\family sans
\series bold
-sdcc\SpecialChar ~
-foomain.c\SpecialChar ~
-foo1.rel\SpecialChar ~
+sdcc\InsetSpace ~
+foomain.c\InsetSpace ~
+foo1.rel\InsetSpace ~
foo2.rel
\family default
\series default
\newline
\newline
-sdcc\SpecialChar ~
--c\SpecialChar ~
+sdcc\InsetSpace ~
+-c\InsetSpace ~
foomain.c
\newline
sdcc foomain.rel foo1.rel foo2.rel
.
You can view this file to troubleshoot linking problems such as those arising
from missing libraries.
+\end_layout
-\layout Subsection
+\begin_layout Subsection
Projects with Additional Libraries
\begin_inset LatexCommand \index{Libraries}
\end_inset
+\end_layout
-\layout Standard
+\begin_layout Standard
Some reusable routines may be compiled into a library, see the documentation
for the assembler and linkage editor (which are in <installdir>/share/sdcc/doc)
for how to create a
libsdcc.lib
\emph default
in the directory <installdir>/share/lib/small.
+\end_layout
-\layout Subsection
+\begin_layout Subsection
Using sdcclib to Create and Manage Libraries
\begin_inset LatexCommand \index{sdcclib}
\end_inset
+\end_layout
-\layout Standard
+\begin_layout Standard
Alternatively, instead of having a .rel file for each entry on the library
file as described in the preceding section, sdcclib can be used to embed
all the modules belonging to such library in the library file itself.
To display a list of options supported by sdcclib type:
\newline
+\end_layout
-\layout Standard
+\begin_layout Standard
\family sans
\series bold
For example:
\newline
+\end_layout
-\layout Standard
+\begin_layout Standard
\family sans
\series bold
sdcc -c _divsint.c
+\end_layout
-\layout Standard
+\begin_layout Standard
\family sans
\series bold
sdcc -c _divuint.c
+\end_layout
-\layout Standard
+\begin_layout Standard
\family sans
\series bold
sdcc -c _modsint.c
+\end_layout
-\layout Standard
+\begin_layout Standard
\family sans
\series bold
sdcc -c _moduint.c
+\end_layout
-\layout Standard
+\begin_layout Standard
\family sans
\series bold
sdcc -c _mulint.c
\newline
+\end_layout
-\layout Standard
+\begin_layout Standard
This will create files _divsint.rel, _divuint.rel, _modsint.rel, _moduint.rel,
and _mulint.rel.
The next step is to add the .rel files to the library file:
\newline
+\end_layout
-\layout Standard
+\begin_layout Standard
\family sans
\series bold
\end_inset
+\end_layout
-\layout Standard
+\begin_layout Standard
\family sans
\series bold
sdcclib libint.lib _divuint.rel
+\end_layout
-\layout Standard
+\begin_layout Standard
\family sans
\series bold
sdcclib libint.lib _modsint.rel
+\end_layout
-\layout Standard
+\begin_layout Standard
\family sans
\series bold
sdcclib libint.lib _moduint.rel
+\end_layout
-\layout Standard
+\begin_layout Standard
\family sans
\series bold
sdcclib libint.lib _mulint.rel
+\family default
+\series default
+
+\newline
+
+\end_layout
+
+\begin_layout Standard
+Or, if you preffer:
+\family sans
+\series bold
+
+\newline
+
+\end_layout
+
+\begin_layout Standard
+
+\family sans
+\series bold
+sdcclib libint.lib _divsint.rel _divuint.rel _modsint.rel _moduint.rel _mulint.rel
+\family default
\series default
\newline
+\end_layout
-\layout Standard
+\begin_layout Standard
If the file already exists in the library, it will be replaced.
- To see what modules and symbols are included in the library, options -s
+ If a list of .rel files is available, you can tell sdcclib to add those
+ files to a library.
+ For example, if the file 'myliblist.txt' contains
+\family sans
+\series bold
+
+\newline
+
+\end_layout
+
+\begin_layout Standard
+
+\family sans
+\series bold
+_divsint.rel
+\end_layout
+
+\begin_layout Standard
+
+\family sans
+\series bold
+_divuint.rel
+\end_layout
+
+\begin_layout Standard
+
+\family sans
+\series bold
+_modsint.rel
+\end_layout
+
+\begin_layout Standard
+
+\family sans
+\series bold
+_moduint.rel
+\end_layout
+
+\begin_layout Standard
+
+\family sans
+\series bold
+_mulint.rel
+\family default
+\series default
+
+\newline
+
+\end_layout
+
+\begin_layout Standard
+Use
+\family sans
+\series bold
+
+\newline
+
+\end_layout
+
+\begin_layout Standard
+
+\family sans
+\series bold
+sdcclib -l libint.lib myliblist.txt
+\family default
+\series default
+
+\newline
+
+\end_layout
+
+\begin_layout Standard
+Additionally, you can instruct sdcclib to compiles the files before adding
+ them to the library.
+ This is achieved using the environment variables SDCCLIB_CC and/or SDCCLIB_AS.
+ For example:
+\family sans
+\series bold
+
+\newline
+
+\end_layout
+
+\begin_layout Standard
+
+\family sans
+\series bold
+set SDCCLIB_CC=sdcc -c
+\end_layout
+
+\begin_layout Standard
+
+\family sans
+\series bold
+sdcclib -l libint.lib myliblist.txt
+\family default
+\series default
+
+\newline
+
+\end_layout
+
+\begin_layout Standard
+To see what modules and symbols are included in the library, options -s
and -m are available.
For example:
\newline
\family typewriter
\series default
_divsint.rel:
+\end_layout
-\layout Standard
+\begin_layout Standard
\family typewriter
__divsint_a_1_1
+\end_layout
-\layout Standard
+\begin_layout Standard
\family typewriter
__divsint_PARM_2
+\end_layout
-\layout Standard
+\begin_layout Standard
\family typewriter
__divsint
\newline
_divuint.rel:
+\end_layout
-\layout Standard
+\begin_layout Standard
\family typewriter
__divuint_a_1_1
+\end_layout
-\layout Standard
+\begin_layout Standard
\family typewriter
__divuint_PARM_2
+\end_layout
-\layout Standard
+\begin_layout Standard
\family typewriter
__divuint_reste_1_1
+\end_layout
-\layout Standard
+\begin_layout Standard
\family typewriter
__divuint_count_1_1
+\end_layout
-\layout Standard
+\begin_layout Standard
\family typewriter
__divuint
\newline
_modsint.rel:
+\end_layout
-\layout Standard
+\begin_layout Standard
\family typewriter
__modsint_a_1_1
+\end_layout
-\layout Standard
+\begin_layout Standard
\family typewriter
__modsint_PARM_2
+\end_layout
-\layout Standard
+\begin_layout Standard
\family typewriter
__modsint
\newline
_moduint.rel:
+\end_layout
-\layout Standard
+\begin_layout Standard
\family typewriter
__moduint_a_1_1
+\end_layout
-\layout Standard
+\begin_layout Standard
\family typewriter
__moduint_PARM_2
+\end_layout
-\layout Standard
+\begin_layout Standard
\family typewriter
__moduint_count_1_1
+\end_layout
-\layout Standard
+\begin_layout Standard
\family typewriter
__moduint
\newline
_mulint.rel:
+\end_layout
-\layout Standard
+\begin_layout Standard
\family typewriter
__mulint_PARM_2
+\end_layout
-\layout Standard
+\begin_layout Standard
\family typewriter
__mulint
\newline
+\end_layout
-\layout Standard
-\added_space_bottom bigskip
+\begin_layout Standard
If the source files are compiled using -
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
is embedded in the library file itself.
Library files created using sdcclib are used as described in the preceding
sections.
+\begin_inset VSpace bigskip
+\end_inset
+\end_layout
-\layout Section
+\begin_layout Section
Command Line Options
\begin_inset LatexCommand \index{Command Line Options}
\end_inset
+\begin_inset LatexCommand \label{sec:Command-Line-Options}
+
+\end_inset
+
+
+\end_layout
-\layout Subsection
+\begin_layout Subsection
Processor Selection Options
\begin_inset LatexCommand \index{Options processor selection}
\end_inset
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
\series bold
family of processors.
This is the default processor target.
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
\series bold
\end_inset
processor.
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
\series bold
\end_inset
processor.
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
\series bold
\end_inset
family of processors.
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
\series bold
\end_inset
family of processors.
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
\series bold
\end_inset
processor (Not actively maintained).
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
\series bold
\end_inset
-.
+, which is based on AVR-port of the gcc compiler.
+\end_layout
-\layout Standard
-\begin_inset Note
-collapsed true
+\begin_layout Standard
+\begin_inset Note Note
+status collapsed
-\layout Standard
+\begin_layout Standard
I think it is fair to direct users there for now.
Open source is also about avoiding unnecessary work .
But I didn't find the 'official' link.
+\end_layout
\end_inset
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
\series bold
-bit processors (p16f84 and variants.
In development, not complete).
+\end_layout
-\layout Standard
-\begin_inset Note
-collapsed true
+\begin_layout Standard
+\begin_inset Note Note
+status collapsed
-\layout Standard
+\begin_layout Standard
p16f627 p16f628 p16f84 p16f873 p16f877?
+\end_layout
\end_inset
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
\series bold
-bit processors (p18f452 and variants.
In development, not complete).
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
\series bold
\end_inset
processor (Not maintained, not complete).
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
-\added_space_bottom bigskip
\series bold
-mxa51
\end_inset
processor (Not maintained, not complete).
+\end_layout
+
+\begin_layout Standard
+\begin_inset VSpace bigskip
+\end_inset
-\layout Subsection
+\end_layout
+
+\begin_layout Subsection
Preprocessor Options
\begin_inset LatexCommand \index{Options preprocessor}
\end_inset
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
\series bold
\series default
- The additional location where the pre processor will look for <..h> or
+ The additional location where the preprocessor will look for <..h> or
\begin_inset Quotes eld
\end_inset
\end_inset
files.
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
\series bold
\series default
Command line definition of macros.
Passed to the preprocessor.
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
\series bold
\end_inset
'.
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
\series bold
\series default
Tell the preprocessor not to discard comments.
Used with the `-E' option.
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
\series bold
file"'.
System header files included with `#include <file>' are omitted.
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
\series bold
conditional such as `#if #question(answer)'.
`-A-' disables the standard assertions that normally describe the target
machine.
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
\series bold
Undefine macro macro.
`-U' options are evaluated after all `-D' options, but before any `-include'
and `-imacros' options.
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
\series bold
Tell the preprocessor to output only a list of the macro definitions that
are in effect at the end of preprocessing.
Used with the `-E' option.
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
\series bold
\series default
Tell the preprocessor to pass all macro definitions into the output, in
their proper sequence in the rest of the output.
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
\series bold
\bar default
Like `-dD' except that the macro arguments and contents are omitted.
Only `#define name' is included in the output.
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
\series bold
-pedantic-parse-number
+\begin_inset LatexCommand \index{pedantic}
+
+\end_inset
+
+
\begin_inset LatexCommand \index{-pedantic-parse-number}
\end_inset
\size large
\bar under
+
+\begin_inset LatexCommand \label{lyx:-pedantic-parse-number}
+
+\end_inset
+
\series default
\size default
\bar default
-Pedentic parse numbers so that situations like 0xfe-LO_B(3) are parsed properly
+Pedantic parse numbers so that situations like 0xfe-LO_B(3) are parsed properly
and the macro LO_B(3) gets expanded.
- See also #pragma pedantic_parse_number in section
+ See also #pragma pedantic_parse_number
+\begin_inset LatexCommand \vpageref{ite:pedantic_parse_number}
+
+\end_inset
+
+ in section
\begin_inset LatexCommand \ref{sec:Pragmas}
\end_inset
\emph on
-Note: this functionality is not in conformance with standard!
+Note: this functionality is not in conformance with C99 standard!
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
-\added_space_bottom bigskip
\series bold
--Wp\SpecialChar ~
+-Wp\InsetSpace ~
preprocessorOption[,preprocessorOption]
\series default
\end_inset
-), if you need more dedicated options please refer to the GCC\SpecialChar ~
-4.1.1\SpecialChar ~
-CPP\SpecialChar ~
+), if you need more dedicated options please refer to the GCC\InsetSpace ~
+4.1.1\InsetSpace ~
+CPP\InsetSpace ~
Manual
at
\begin_inset LatexCommand \htmlurl{http://www.gnu.org/software/gcc/onlinedocs/}
\end_inset
.
+\end_layout
+
+\begin_layout Standard
+\begin_inset VSpace bigskip
+\end_inset
-\layout Subsection
+\end_layout
+
+\begin_layout Subsection
Linker Options
\begin_inset LatexCommand \index{Options linker}
\end_inset
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
\series bold
--L\SpecialChar ~
+-L\InsetSpace ~
-
\series default
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
\series default
-\SpecialChar ~
+\InsetSpace ~
<absolute path to additional libraries> This option is passed to the linkage
editor's additional libraries
\begin_inset LatexCommand \index{Libraries}
The path name must be absolute.
Additional library files may be specified in the command line.
See section Compiling programs for more details.
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
\series bold
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
\end_inset
-\SpecialChar ~
+\InsetSpace ~
<Value> The start location of the external ram
\begin_inset LatexCommand \index{xdata (mcs51, ds390 storage class)}
, default value is 0.
The value entered can be in Hexadecimal or Decimal format, e.g.: -
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
-xram-loc 0x8000 or -
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
-xram-loc 32768.
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
\series bold
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
\end_inset
-\SpecialChar ~
+\InsetSpace ~
<Value> The start location of the code
\begin_inset LatexCommand \index{code}
is also relocated to the given address.
The value entered can be in Hexadecimal or Decimal format, e.g.: -
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
-code-loc 0x8000 or -
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
-code-loc 32768.
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
\series bold
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
\end_inset
-\SpecialChar ~
+\InsetSpace ~
<Value> By default the stack
\begin_inset LatexCommand \index{stack}
The value entered can be in Hexadecimal or Decimal format, e.g.
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
-stack-loc 0x20 or -
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
\series bold
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
-pack-iram
\series default
-\SpecialChar ~
+\InsetSpace ~
\begin_inset LatexCommand \index{-\/-pack-iram}
\series bold
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
-no-pack-iram
\series default
-\SpecialChar ~
+\InsetSpace ~
\begin_inset LatexCommand \index{-\/-no-pack-iram}
\end_inset
option if you need to manually place the stack.
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
\series bold
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
\end_inset
-\SpecialChar ~
+\InsetSpace ~
<Value> By default the external stack
\begin_inset LatexCommand \index{xstack}
The value entered can be in Hexadecimal or Decimal format, e.g.
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
-xstack-loc 0x8000 or -
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
-stack-loc 32768.
The provided value should not overlap any other memory areas such as the
pdata or xdata segment and with enough space for the current application.
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
\series bold
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
\end_inset
-\SpecialChar ~
+\InsetSpace ~
<Value> The start location of the internal ram data
\begin_inset LatexCommand \index{data (mcs51, ds390 storage class)}
The value entered can be in Hexadecimal or Decimal format, eg.
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
-data-loc 0x20 or -
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
For example if register banks 0 and 1 are used without bit variables, the
data segment will be set, if -
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
-data-loc is not used, to location 0x10.)
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
\series bold
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
\end_inset
-\SpecialChar ~
+\InsetSpace ~
<Value> The start location of the indirectly addressable internal ram
\begin_inset LatexCommand \index{idata (mcs51, ds390 storage class)}
The value entered can be in Hexadecimal or Decimal format, eg.
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
-idata-loc 0x88 or -
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
-idata-loc 136.
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
\series bold
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
-bit-loc
\series default
-\SpecialChar ~
+\InsetSpace ~
<Value> The start location of the bit
\begin_inset LatexCommand \index{bit}
not
\emph default
implemented yet.
- Instead an option can be passed directly to the linker: -Wl\SpecialChar ~
+ Instead an option can be passed directly to the linker: -Wl\InsetSpace ~
-bBSEG=<Value>.
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
\series bold
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
\end_inset
.
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
\series bold
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
.
The format itself is documented in the documentation of srecord.
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
\series bold
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
\end_inset
processors)
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
-\added_space_bottom bigskip
\series bold
--Wl\SpecialChar ~
+-Wl\InsetSpace ~
linkOption[,linkOption]
\series default
\begin_inset Quotes sld
\end_inset
--Wl\SpecialChar ~
+-Wl\InsetSpace ~
-bCSEG=0x1000
\begin_inset Quotes srd
\end_inset
.
File sdcc/as/doc/asxhtm.html has more on linker options.
+\end_layout
+
+\begin_layout Standard
+\begin_inset VSpace bigskip
+\end_inset
+
+\end_layout
-\layout Subsection
+\begin_layout Subsection
MCS51 Options
\begin_inset LatexCommand \index{Options MCS51}
\end_inset
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
\series bold
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
Generate code for Small Model programs, see section Memory Models for more
details.
This is the default model.
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
\series bold
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
If this option is used all source files in the project have to be compiled
with this option.
It must also be used when invoking the linker.
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
\series bold
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
If this option is used all source files in the project have to be compiled
with this option.
It must also be used when invoking the linker.
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
\series bold
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
\end_inset
-\SpecialChar ~
+\InsetSpace ~
External Stack for more details.
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
\series bold
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
-iram-size
\series default
-\SpecialChar ~
+\InsetSpace ~
<Value>
\begin_inset LatexCommand \index{-\/-iram-size <Value>}
Causes the linker to check if the internal ram usage is within limits of
the given value.
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
\series bold
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
-xram-size
\series default
-\SpecialChar ~
+\InsetSpace ~
<Value>
\begin_inset LatexCommand \index{-\/-xram-size <Value>}
Causes the linker to check if the external ram usage is within limits of
the given value.
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
\series bold
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
-code-size
\series default
-\SpecialChar ~
+\InsetSpace ~
<Value>
\begin_inset LatexCommand \index{-\/-code-size <Value>}
Causes the linker to check if the code memory usage is within limits of
the given value.
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
\series bold
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
-stack-size
\series default
-\SpecialChar ~
+\InsetSpace ~
<Value>
\begin_inset LatexCommand \index{-\/-stack-size <Value>}
\end_inset
Causes the linker to check if there is at minimum <Value> bytes for stack.
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
\series bold
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
-pack-iram
\series default
-\SpecialChar ~
+\InsetSpace ~
\begin_inset LatexCommand \index{-\/-pack-iram}
Causes the linker to use unused register banks for data variables and pack
data, idata and stack together.
This is the default now.
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
-\added_space_bottom bigskip
\series bold
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
-no-pack-iram
\series default
-\SpecialChar ~
+\InsetSpace ~
\begin_inset LatexCommand \index{-\/-no-pack-iram}
\end_inset
Causes the linker to use old style for allocating memory areas.
+\end_layout
+
+\begin_layout List
+\labelwidthstring 00.00.0000
+
+\series bold
+-
+\begin_inset ERT
+status collapsed
+
+\begin_layout Standard
+
+
+\backslash
+/
+\end_layout
+
+\end_inset
+
+-acall-ajmp
+\series default
+\InsetSpace ~
+
+\begin_inset LatexCommand \index{-\/-acall-ajmp}
+
+\end_inset
+
+ Replaces the three byte instructions lcall/ljmp with the two byte instructions
+ acall/ajmp.
+ Only use this option if your code is in the same 2k block of memory.
+ You may need to use this option for some 8051 derivatives which lack the
+ lcall/ljmp instructions..
+\end_layout
+
+\begin_layout Standard
+\begin_inset VSpace bigskip
+\end_inset
+
+\end_layout
-\layout Subsection
+\begin_layout Subsection
DS390 / DS400 Options
\begin_inset LatexCommand \index{Options DS390}
\end_inset
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
\series bold
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
\emph default
.
See section Memory Models for more details.
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
\series bold
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
\series default
disable interrupts during ESP:SP updates.
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
\series bold
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
\emph on
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
\emph on
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
\emph on
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
-model-flat24 option
\emph default
).
+\series bold
+
+\begin_inset Note Note
+status collapsed
+
+\begin_layout List
+\labelwidthstring 00.00.0000
+
+\series bold
+-
+\begin_inset ERT
+status open
-\layout List
+\begin_layout Standard
+
+
+\backslash
+/
+\end_layout
+
+\end_inset
+
+-stack-8-bit - switches off the 10-bit mode
+\end_layout
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout List
\labelwidthstring 00.00.0000
\series bold
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
\series default
insert call to function __stack_probe at each function prologue.
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
\series bold
-
\begin_inset ERT
-status Collapsed
+status open
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
\series default
<nnnn> LibraryID used in -mTININative.
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
-\added_space_bottom bigskip
\series bold
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
\series default
generate code for DS390 Arithmetic Accelerator.
+\end_layout
+
+\begin_layout Standard
+\begin_inset VSpace bigskip
+\end_inset
-\layout Subsection
+\end_layout
+
+\begin_layout Subsection
Z80 Options
\begin_inset LatexCommand \index{Options Z80}
\end_inset
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
\series bold
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
\size default
\emph default
Force a called function to always save BC.
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
-\added_space_bottom bigskip
\series bold
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
When linking, skip the standard crt0.o object file.
You must provide your own crt0.o for your system when linking.
-
+\end_layout
+\begin_layout List
+\labelwidthstring 00.00.0000
-\layout Subsection
-Optimization Options
-\begin_inset LatexCommand \index{Options optimization}
+\series bold
+-
+\begin_inset ERT
+status collapsed
-\end_inset
+\begin_layout Standard
-\begin_inset LatexCommand \index{Optimization options}
+\backslash
+/
+\end_layout
\end_inset
+-portmode=
+\series default
+<Value>
+\begin_inset LatexCommand \index{Z80!Options!-\/-portmode=<Value>}
+
+\end_inset
+ Determinate PORT I/O mode (<Value> is z80 or z180).
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
\series bold
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
--nogcse
-\begin_inset LatexCommand \index{-\/-nogcse}
+-asm=
+\series default
+<Value>
+\begin_inset LatexCommand \index{Z80!Options!-\/-asm=<Value>}
\end_inset
+ Define assembler name (<Value> is rgbds, asxxxx, isas or z80asm).
+\end_layout
-\series default
- Will not do global subexpression elimination, this option may be used when
- the compiler creates undesirably large stack/data spaces to store compiler
- temporaries (
-\emph on
-s
-\emph default
-pill
-\emph on
-loc
-\emph default
-ations, sloc
-\begin_inset LatexCommand \index{sloc (spill location)}
+\begin_layout List
+\labelwidthstring 00.00.0000
+
+\series bold
+-
+\begin_inset ERT
+status collapsed
+
+\begin_layout Standard
+
+
+\backslash
+/
+\end_layout
+
+\end_inset
+
+-codeseg
+\series default
+\InsetSpace ~
+<Value>
+\begin_inset LatexCommand \index{Z80!Options!-\/-codeseg <Value>}
+
+\end_inset
+
+ Use <Value> for the code segment name.
+\end_layout
+
+\begin_layout List
+\labelwidthstring 00.00.0000
+
+\series bold
+-
+\begin_inset ERT
+status collapsed
+
+\begin_layout Standard
+
+
+\backslash
+/
+\end_layout
+
+\end_inset
+
+-constseg
+\series default
+\InsetSpace ~
+<Value>
+\begin_inset LatexCommand \index{Z80!Options!-\/-constseg <Value>}
+
+\end_inset
+
+ Use <Value> for the const segment name.
+\end_layout
+
+\begin_layout List
+\labelwidthstring 00.00.0000
+\begin_inset VSpace bigskip
+\end_inset
+
+
+\end_layout
+
+\begin_layout Subsection
+GBZ80 Options
+\begin_inset LatexCommand \index{Options GBZ80}
+
+\end_inset
+
+
+\begin_inset LatexCommand \index{GBZ80}
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout List
+\labelwidthstring 00.00.0000
+
+\series bold
+-
+\begin_inset ERT
+status collapsed
+
+\begin_layout Standard
+
+
+\backslash
+/
+\end_layout
+
+\end_inset
+
+-callee-saves-bc
+\series default
+
+\begin_inset LatexCommand \index{GBZ80!Options!-\/-callee-saves-bc}
+
+\end_inset
+
+
+\size large
+\emph on
+
+\size default
+\emph default
+Force a called function to always save BC.
+\end_layout
+
+\begin_layout List
+\labelwidthstring 00.00.0000
+
+\series bold
+-bo
+\series default
+\InsetSpace ~
+<Num>
+\begin_inset LatexCommand \index{GBZ80!Options!-bo <Num>}
+
+\end_inset
+
+ Use code bank <Num>.
+\end_layout
+
+\begin_layout List
+\labelwidthstring 00.00.0000
+
+\series bold
+-ba
+\series default
+\InsetSpace ~
+<Num>
+\begin_inset LatexCommand \index{GBZ80!Options!-ba <Num>}
+
+\end_inset
+
+ Use data bank <Num>.
+\end_layout
+
+\begin_layout List
+\labelwidthstring 00.00.0000
+
+\series bold
+-
+\begin_inset ERT
+status collapsed
+
+\begin_layout Standard
+
+
+\backslash
+/
+\end_layout
+
+\end_inset
+
+-codeseg
+\series default
+\InsetSpace ~
+<Value>
+\begin_inset LatexCommand \index{GBZ80!Options!-\/-codeseg <Value>}
+
+\end_inset
+
+ Use <Value> for the code segment name.
+\end_layout
+
+\begin_layout List
+\labelwidthstring 00.00.0000
+
+\series bold
+-
+\begin_inset ERT
+status collapsed
+
+\begin_layout Standard
+
+
+\backslash
+/
+\end_layout
+
+\end_inset
+
+-constseg
+\series default
+\InsetSpace ~
+<Value>
+\begin_inset LatexCommand \index{GBZ80!Options!-\/-constseg <Value>}
+
+\end_inset
+
+ Use <Value> for the const segment name.
+\end_layout
+
+\begin_layout Standard
+\begin_inset VSpace bigskip
+\end_inset
+
+
+\end_layout
+
+\begin_layout Subsection
+Optimization Options
+\begin_inset LatexCommand \index{Options optimization}
+
+\end_inset
+
+
+\begin_inset LatexCommand \index{Optimization options}
+
+\end_inset
+
+
+\end_layout
+
+\begin_layout List
+\labelwidthstring 00.00.0000
+
+\series bold
+-
+\begin_inset ERT
+status collapsed
+
+\begin_layout Standard
+
+
+\backslash
+/
+\end_layout
+
+\end_inset
+
+-nogcse
+\begin_inset LatexCommand \index{-\/-nogcse}
+
+\end_inset
+
+
+\series default
+ Will not do global subexpression elimination, this option may be used when
+ the compiler creates undesirably large stack/data spaces to store compiler
+ temporaries (
+\emph on
+s
+\emph default
+pill
+\emph on
+loc
+\emph default
+ations, sloc
+\begin_inset LatexCommand \index{sloc (spill location)}
\end_inset
).
A warning message will be generated when this happens and the compiler
will indicate the number of extra bytes it allocated.
- It is recommended that this option NOT be used, #pragma\SpecialChar ~
+ It is recommended that this option NOT be used, #pragma\InsetSpace ~
nogcse
\begin_inset LatexCommand \index{\#pragma nogcse}
\end_inset
for a given function only.
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
\series bold
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
\end_inset
.
- It is recommended that this option NOT be used, #pragma\SpecialChar ~
+ It is recommended that this option NOT be used, #pragma\InsetSpace ~
noinvariant
\begin_inset LatexCommand \index{\#pragma noinvariant}
\end_inset
can be used to turn off invariant optimizations for a given function only.
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
\series bold
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
\series default
Will not do loop induction optimizations, see section strength reduction
for more details.
- It is recommended that this option is NOT used, #pragma\SpecialChar ~
+ It is recommended that this option is NOT used, #pragma\InsetSpace ~
noinduction
\begin_inset LatexCommand \index{\#pragma noinduction}
\end_inset
can be used to turn off induction optimizations for a given function only.
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
\series bold
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
\end_inset
-\SpecialChar ~
+\InsetSpace ~
Switch Statements for more details.
- It is recommended that this option is NOT used, #pragma\SpecialChar ~
+ It is recommended that this option is NOT used, #pragma\InsetSpace ~
nojtbound
\begin_inset LatexCommand \index{\#pragma nojtbound}
can be used to turn off boundary checking for jump tables for a given function
only.
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
\series bold
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
\end_inset
optimization.
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
\end_inset
Will not optimize labels (makes the dumpfiles more readable).
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
\series bold
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
\end_inset
.
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
\series bold
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
\series default
The compiler will not overlay parameters and local variables of any function,
see section Parameters and local variables for more details.
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
\series bold
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
\series default
Disable peep-hole optimization with built-in rules.
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
\series bold
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
\end_inset
-\SpecialChar ~
+\InsetSpace ~
<filename> This option can be used to use additional rules to be used by
the peep hole optimizer.
See section
\end_inset
-\SpecialChar ~
+\InsetSpace ~
Peep Hole optimizations for details on how to write these rules.
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
\series bold
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
rules defined in the source file tree '<target>/peeph.def' before using
this option.
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
\series bold
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
\series default
The compiler will optimize code generation towards fast code, possibly
at the expense of code size.
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
-\added_space_bottom bigskip
\series bold
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
\series default
The compiler will optimize code generation towards compact code, possibly
at the expense of code speed.
+\end_layout
+
+\begin_layout Standard
+\begin_inset VSpace bigskip
+\end_inset
-\layout Subsection
+\end_layout
+
+\begin_layout Subsection
Other Options
\begin_inset LatexCommand \index{Options other}
\end_inset
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
\series bold
--c\SpecialChar ~
+-c\InsetSpace ~
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
\series default
will compile and assemble the source, but will not call the linkage editor.
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
\series bold
\series default
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
\series default
reads the preprocessed source from standard input and compiles it.
The file name for the assembler output must be specified using the -o option.
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
\series bold
Run only the C preprocessor.
Preprocess all the C source files specified and output the results to standard
output.
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
\series bold
--o\SpecialChar ~
+-o\InsetSpace ~
<path/file>
\begin_inset LatexCommand \index{-o <path/file>}
\series default
-The output path resp.
- file where everything will be placed.
+The output path where everything will be placed or the file name used for
+ all generated output files.
If the parameter is a path, it must have a trailing slash (or backslash
for the Windows binaries) to be recognized as a path.
+
+\emph on
+
+\emph default
+Note for Windows users: if the path contains spaces, it should be surrounded
+ by quotes.
+ The trailing backslash should be doubled in order to prevent escaping the
+ final quote, for example:
+\emph on
+-o
+\begin_inset Quotes sld
+\end_inset
+
+F:
+\backslash
+Projects
+\backslash
+test3
+\backslash
+output 1
+\backslash
+
+\backslash
+
+\begin_inset Quotes srd
+\end_inset
+
+
+\emph default
+ or put after the final quote, for example:
+\emph on
+-o
+\begin_inset Quotes sld
+\end_inset
+
+F:
+\backslash
+Projects
+\backslash
+test3
+\backslash
+output 1
+\begin_inset Quotes srd
+\end_inset
+
+
+\backslash
+
+\emph default
+.
+ The path using slashes for directory delimiters can be used too, for example:
+\emph on
+-o
+\begin_inset Quotes sld
+\end_inset
+
+F:/Projects/test3/output 1/
+\begin_inset Quotes srd
+\end_inset
+
+
+\emph default
+.
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
\series bold
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
Parameters and Local Variables for more details.
If this option is used all source files in the project should be compiled
with this option.
- It automatically implies --int-long-reent and --float-reent.
-
-
-\layout List
-\labelwidthstring 00.00.0000
-
+ It automatically implies -
\series bold
--
+
\begin_inset ERT
-status Collapsed
+status open
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
--callee-saves
-\begin_inset LatexCommand \index{-\/-callee-saves}
-
-\end_inset
-
- function1[,function2][,function3]....
\series default
- The compiler by default uses a caller saves convention for register saving
- across function calls, however this can cause unnecessary register pushing
- & popping when calling small functions from larger functions.
- This option can be used to switch the register saving convention for the
- function names specified.
- The compiler will not save registers when calling these functions, no extra
- code will be generated at the entry & exit (function prologue
+-int-long-reent and -
\series bold
-\begin_inset LatexCommand \index{function prologue}
+\begin_inset ERT
+status open
+
+\begin_layout Standard
+
+
+\backslash
+/
+\end_layout
\end_inset
\series default
- & epilogue
-\series bold
+-float-reent.
+
+\end_layout
+
+\begin_layout List
+\labelwidthstring 00.00.0000
+
+\series bold
+-
+\begin_inset ERT
+status collapsed
+
+\begin_layout Standard
+
+
+\backslash
+/
+\end_layout
+
+\end_inset
+
+-callee-saves
+\begin_inset LatexCommand \index{-\/-callee-saves}
+
+\end_inset
+
+
+\begin_inset LatexCommand \label{lyx:--callee-saves-function1[,function2][,function3]...}
+
+\end_inset
+
+function1[,function2][,function3]....
+
+\series default
+ The compiler by default uses a caller saves convention for register saving
+ across function calls, however this can cause unnecessary register pushing
+ and popping when calling small functions from larger functions.
+ This option can be used to switch the register saving convention for the
+ function names specified.
+ The compiler will not save registers when calling these functions, no extra
+ code will be generated at the entry and exit (function prologue
+\series bold
+
+\begin_inset LatexCommand \index{function prologue}
+
+\end_inset
+
+
+\series default
+ and epilogue
+\series bold
\begin_inset LatexCommand \index{function epilogue}
\series default
-) for these functions to save & restore the registers used by these functions,
- this can SUBSTANTIALLY reduce code & improve run time performance of the
- generated code.
+) for these functions to save and restore the registers used by these functions,
+ this can SUBSTANTIALLY reduce code and improve run time performance of
+ the generated code.
In the future the compiler (with inter procedural analysis) will be able
to determine the appropriate scheme to use for each function call.
DO NOT use this option for built-in functions such as _mulint..., if this
If the project consists of multiple source files then all the source file
should be compiled with the same -
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
-callee-saves option string.
- Also see #pragma\SpecialChar ~
-callee_saves
+ Also see #pragma\InsetSpace ~
+callee_saves
\begin_inset LatexCommand \index{\#pragma callee\_saves}
\end_inset
+
+\begin_inset LatexCommand \vpageref{ite:callee_saves-function1[,function2[,function3...]]--}
+
+\end_inset
+
.
+\end_layout
+
+\begin_layout List
+\labelwidthstring 00.00.0000
+
+\series bold
+-
+\begin_inset ERT
+status collapsed
+
+\begin_layout Standard
+
+
+\backslash
+/
+\end_layout
+
+\end_inset
+
+-all-callee-saves
+\begin_inset LatexCommand \index{-\/-all-callee-saves}
+
+\end_inset
+
+
+\series default
+Function of
+\series bold
+
+\series default
+-
+\begin_inset ERT
+status collapsed
+
+\begin_layout Standard
-\layout List
+
+\backslash
+/
+\end_layout
+
+\end_inset
+
+-callee-saves will be applied to all functions by default.
+\end_layout
+
+\begin_layout List
\labelwidthstring 00.00.0000
\series bold
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
\end_inset
format which is commonly used by third party tools.
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
\series bold
\bar default
Stop after the stage of compilation proper; do not assemble.
The output is an assembler code file for the input file specified.
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
\series bold
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
Integer (16 bit) and long (32 bit) libraries have been compiled as reentrant.
Note by default these libraries are compiled as non-reentrant.
See section Installation for more details.
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
\series bold
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
\emph default
see section on Cyclomatic Complexity for more details.
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
\series bold
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
.
See section Installation for more details.
+\end_layout
+
+\begin_layout List
+\labelwidthstring 00.00.0000
+
+\series bold
+-
+\begin_inset ERT
+status collapsed
+
+\begin_layout Standard
+
+
+\backslash
+/
+\end_layout
+
+\end_inset
+
+-funsigned-char
+\begin_inset LatexCommand \index{-\/-funsigned-char}
+
+\end_inset
+
-\layout List
+\series default
+ The default signedness for every type is
+\family typewriter
+ signed
+\family default
+.
+ In some embedded environments the default signedness of
+\family typewriter
+ char
+\family default
+ is
+\family typewriter
+ unsigned
+\family default
+.
+ To set the signess for characters to unsigned, use the option -
+\series bold
+
+\begin_inset ERT
+status open
+
+\begin_layout Standard
+
+
+\backslash
+/
+\end_layout
+
+\end_inset
+
+
+\series default
+-funsigned-char.
+ If this option is set and no signedness keyword (unsigned/signed) is given,
+ a char will be signed.
+ All other types are unaffected.
+\end_layout
+
+\begin_layout List
\labelwidthstring 00.00.0000
\series bold
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
sjmp .
\family default
'.
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
\series bold
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
\series default
This will prevent the compiler from passing on the default include path
to the preprocessor.
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
\series bold
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
\end_inset
path to the linker.
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
\series bold
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
\series default
Shows the various actions the compiler is performing.
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
\series bold
\series default
Shows the actual commands the compiler is executing.
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
\series bold
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
\series default
Hides your ugly and inefficient c-code from the asm file, so you can always
blame the compiler :)
+\end_layout
+
+\begin_layout List
+\labelwidthstring 00.00.0000
+
+\series bold
+-
+\begin_inset ERT
+status collapsed
+
+\begin_layout Standard
+
+
+\backslash
+/
+\end_layout
+
+\end_inset
+
+-fverbose-asm
+\begin_inset LatexCommand \index{-\/-no-gen-comments}
+
+\end_inset
+
-\layout List
+\series default
+ Include code generator and peep-hole comments in the generated asm files.
+\end_layout
+
+\begin_layout List
\labelwidthstring 00.00.0000
\series bold
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
\series default
- Will not include peep-hole comments in the generated files.
+ Don't include peep-hole comments in the generated asm files even if -
+\series bold
+
+\begin_inset ERT
+status open
+
+\begin_layout Standard
+
+
+\backslash
+/
+\end_layout
+
+\end_inset
+
+
+\series default
+-fverbose-asm option is specified.
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
\series bold
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
\series default
Include i-codes in the asm file.
Sounds like noise but is most helpful for debugging the compiler itself.
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
\series bold
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
-less-pedantic
+\begin_inset LatexCommand \index{pedantic}
+
+\end_inset
+
+
\begin_inset LatexCommand \index{-\/-less-pedantic}
\end_inset
\series default
+
+\begin_inset LatexCommand \label{lyx:--less-pedantic}
+
+\end_inset
+
Disable some of the more pedantic warnings
\begin_inset LatexCommand \index{Warnings}
\end_inset
- (jwk burps: please be more specific here, please!).
+.
+ For more details, see the less_pedantic pragma
+\begin_inset LatexCommand \vpageref{ite:less_pedantic}
+
+\end_inset
+
+.
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
\series bold
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
--disable-warning\SpecialChar ~
+-disable-warning\InsetSpace ~
<nnnn>
\begin_inset LatexCommand \index{-\/-disable-warning}
\series default
Disable specific warning with number <nnnn>.
+\end_layout
+
+\begin_layout List
+\labelwidthstring 00.00.0000
+
+\series bold
+-
+\begin_inset ERT
+status collapsed
+
+\begin_layout Standard
+
+
+\backslash
+/
+\end_layout
+
+\end_inset
+
+-Werror
+\begin_inset LatexCommand \index{-\/-Werror}
+
+\end_inset
-\layout List
+
+\series default
+ Treat all warnings as errors.
+\end_layout
+
+\begin_layout List
\labelwidthstring 00.00.0000
\series bold
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
\series default
Display the directories in the compiler's search path
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
\series bold
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
output style, integration into most programming editors should be straightforwa
rd.
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
\series bold
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
\series default
Send errors and warnings to stdout instead of stderr.
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
\series bold
--Wa\SpecialChar ~
+-Wa\InsetSpace ~
asmOption[,asmOption]
\series default
.
See file sdcc/as/doc/asxhtm.html for assembler options.cd
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
\series bold
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
\series default
Generally follow the C89 standard, but allow SDCC features that conflict
with the standard (default).
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
\series bold
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
\series default
Follow the C89 standard and disable SDCC features that conflict with the
standard.
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
\series bold
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
\series default
Generally follow the C99 standard, but allow SDCC features that conflict
with the standard (incomplete support).
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
\series bold
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
\series default
Follow the C99 standard and disable SDCC features that conflict with the
standard (incomplete support).
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
\series bold
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
\end_inset
-\SpecialChar ~
+\InsetSpace ~
<Name> The name to be used for the code
\begin_inset LatexCommand \index{code}
place in memory.
Can be used for instance when using bank switching to put the code in a
bank.
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
\series bold
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
\end_inset
-\SpecialChar ~
+\InsetSpace ~
<Name> The name to be used for the const
-\begin_inset LatexCommand \index{code}
+\begin_inset LatexCommand \index{const}
\end_inset
in a special place in memory.
Can be used for instance when using bank switching to put the const data
in a bank.
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
\series bold
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
\series default
- Permit '$' as an identifier character
+ Permit '$' as an identifier character.
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
-\added_space_bottom bigskip
\series bold
-more-pedantic
+-
+\begin_inset ERT
+status collapsed
+
+\begin_layout Standard
+
+
+\backslash
+/
+\end_layout
+
+\end_inset
+
+-more-pedantic
\series default
+
+\begin_inset LatexCommand \index{-\/-more-pedantic}
+
+\end_inset
+
+
+\begin_inset LatexCommand \index{pedantic}
+
+\end_inset
+
Actually this is
\series bold
\emph on
\begin_inset Quotes sld
\end_inset
-__at\SpecialChar ~
+__at\InsetSpace ~
\series bold
(
\begin_inset Quotes sld
\end_inset
-__interrupt\SpecialChar ~
+__interrupt\InsetSpace ~
(2)
\begin_inset Quotes srd
\end_inset
\newline
\family sans
-splint\SpecialChar ~
--I\SpecialChar ~
-/usr/local/share/sdcc/include/mcs51/\SpecialChar ~
-\SpecialChar ~
+splint\InsetSpace ~
+-I\InsetSpace ~
+/usr/local/share/sdcc/include/mcs51/\InsetSpace ~
+\InsetSpace ~
myprogram.c
+\end_layout
+
+\begin_layout List
+\labelwidthstring 00.00.0000
+
+\series bold
+-
+\begin_inset ERT
+status collapsed
+
+\begin_layout Standard
+
+
+\backslash
+/
+\end_layout
+
+\end_inset
+
+-short-is-8bits
+\series default
+
+\begin_inset LatexCommand \index{-\/-short-is-8bits}
+
+\end_inset
+
+
+\begin_inset LatexCommand \label{lyx:--short-is-8bits}
+
+\end_inset
+
+ Treat short as 8-bit (for backward compatibility with older versions of
+ compiler - see section
+\begin_inset LatexCommand \ref{sec:Compatibility-with-previous}
+
+\end_inset
+
+)
+\end_layout
+
+\begin_layout Standard
+\begin_inset VSpace bigskip
+\end_inset
-\layout Subsection
+\end_layout
+
+\begin_layout Subsection
Intermediate Dump Options
\begin_inset LatexCommand \label{sub:Intermediate-Dump-Options}
\end_inset
+\end_layout
-\layout Standard
+\begin_layout Standard
The following options are provided for the purpose of retargetting and debugging
the compiler.
They provide a means to dump the intermediate code (iCode
\end_inset
.
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
\series bold
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
at this stage ordered in the depth first number, so they may not be in
sequence of execution.
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
\series bold
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
\series default
- Will create a dump of iCode's, after global subexpression elimination
+ Will create a dump of iCodes, after global subexpression elimination
\begin_inset LatexCommand \index{Global subexpression elimination}
\end_inset
, into a file named
\emph on
<source filename>.dumpgcse.
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
\series bold
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
\series default
- Will create a dump of iCode's, after deadcode elimination
+ Will create a dump of iCodes, after deadcode elimination
\begin_inset LatexCommand \index{Dead-code elimination}
\end_inset
, into a file named
\emph on
<source filename>.dumpdeadcode.
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
\series bold
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
\size large
\size default
-Will create a dump of iCode's, after loop optimizations
+Will create a dump of iCodes, after loop optimizations
\begin_inset LatexCommand \index{Loop optimization}
\end_inset
, into a file named
\emph on
<source filename>.dumploop.
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
\series bold
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
\size large
\size default
-Will create a dump of iCode's, after live range analysis
+Will create a dump of iCodes, after live range analysis
\begin_inset LatexCommand \index{Live range analysis}
\end_inset
, into a file named
\emph on
<source filename>.dumprange.
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
\series bold
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
\end_inset
for all symbols.
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
\series bold
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
\series default
\bar default
-Will create a dump of iCode's, after register assignment
+Will create a dump of iCodes, after register assignment
\begin_inset LatexCommand \index{Register assignment}
\end_inset
, into a file named
\emph on
<source filename>.dumprassgn.
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
\series bold
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
\series default
Will create a dump of the live ranges of iTemp's
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
-\added_space_bottom bigskip
\series bold
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
\size default
\bar default
Will cause all the above mentioned dumps to be created.
+\end_layout
+
+\begin_layout Standard
+\begin_inset VSpace bigskip
+\end_inset
+
+\end_layout
-\layout Subsection
+\begin_layout Subsection
Redirecting output on Windows Shells
+\end_layout
-\layout Standard
-\added_space_bottom bigskip
-By default SDCC writes it's error messages to
+\begin_layout Standard
+By default SDCC writes its error messages to
\begin_inset Quotes sld
\end_inset
\emph on
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
\emph on
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
\emph on
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
\emph on
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
-model-large -c $(InputPath)
\series default
+\begin_inset VSpace bigskip
+\end_inset
+\end_layout
-\layout Section
+\begin_layout Section
Environment variables
\begin_inset LatexCommand \index{Environment variables}
\end_inset
+\end_layout
-\layout Standard
+\begin_layout Standard
SDCC recognizes the following environment variables:
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
\series bold
to be able to delete temporary files after an user break (^C) or an exception.
If this environment variable is set, SDCC won't install the signal handler
in order to be able to debug SDCC.
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
\series bold
-TMP,\SpecialChar ~
-TEMP,\SpecialChar ~
+TMP,\InsetSpace ~
+TEMP,\InsetSpace ~
TMPDIR
\begin_inset LatexCommand \index{TMP, TEMP, TMPDIR}
In a standard *nix environment these variables are not set, and there's
no need to set them.
On Windows it's recommended to set one of them.
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
\series bold
\end_inset
-\SpecialChar ~
+\InsetSpace ~
\begin_inset Quotes sld
\end_inset
\end_inset
.
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
\series bold
\end_inset
-\SpecialChar ~
+\InsetSpace ~
\begin_inset Quotes sld
\end_inset
\end_inset
.
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
\series bold
\end_inset
-\SpecialChar ~
+\InsetSpace ~
\begin_inset Quotes sld
\end_inset
\end_inset
..
+\end_layout
-\layout Standard
-\added_space_bottom bigskip
+\begin_layout Standard
There are some more environment variables recognized by SDCC, but these
are solely used for debugging purposes.
They can change or disappear very quickly, and will never be documented.
+\begin_inset VSpace bigskip
+\end_inset
+\end_layout
-\layout Section
+\begin_layout Section
Storage Class Language Extensions
+\end_layout
-\layout Subsection
+\begin_layout Subsection
MCS51/DS390 Storage Class
\begin_inset LatexCommand \index{Storage class}
\end_inset
Language Extensions
+\end_layout
-\layout Standard
+\begin_layout Standard
In addition to the ANSI storage classes SDCC allows the following MCS51
specific storage classes:
+\end_layout
-\layout Subsubsection
+\begin_layout Subsubsection
data
\begin_inset LatexCommand \index{data (mcs51, ds390 storage class)}
\end_inset
+\end_layout
-\layout Standard
+\begin_layout Standard
This is the
\series bold
default
can be used synonymously).
Variables declared with this storage class will be allocated in the directly
addressable portion of the internal RAM of a 8051, e.g.:
+\end_layout
-\layout Verse
+\begin_layout Verse
\family typewriter
__data unsigned char test_data;
+\end_layout
-\layout Standard
+\begin_layout Standard
Writing 0x01 to this variable generates the assembly code:
+\end_layout
-\layout Verse
+\begin_layout Verse
\family typewriter
-75*00 01\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-mov\SpecialChar ~
-\SpecialChar ~
+75*00 01\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+mov\InsetSpace ~
+\InsetSpace ~
_test_data,#0x01
+\end_layout
-\layout Subsubsection
+\begin_layout Subsubsection
xdata
\begin_inset LatexCommand \index{xdata (mcs51, ds390 storage class)}
\end_inset
+\end_layout
-\layout Standard
+\begin_layout Standard
Variables declared with this storage class will be placed in the external
RAM.
This is the
default
\series default
storage class for the Large Memory model, e.g.:
+\end_layout
-\layout Verse
+\begin_layout Verse
\family typewriter
__xdata unsigned char test_xdata;
+\end_layout
-\layout Standard
+\begin_layout Standard
Writing 0x01 to this variable generates the assembly code:
+\end_layout
-\layout Verse
+\begin_layout Verse
\family typewriter
-90s00r00\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-mov\SpecialChar ~
-\SpecialChar ~
+90s00r00\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+mov\InsetSpace ~
+\InsetSpace ~
dptr,#_test_xdata
\newline
-74\SpecialChar ~
-01\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-mov\SpecialChar ~
-\SpecialChar ~
+74\InsetSpace ~
+01\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+mov\InsetSpace ~
+\InsetSpace ~
a,#0x01
\newline
-F0\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-movx\SpecialChar ~
+F0\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+movx\InsetSpace ~
@dptr,a
+\end_layout
-\layout Subsubsection
+\begin_layout Subsubsection
idata
\begin_inset LatexCommand \index{idata (mcs51, ds390 storage class)}
\end_inset
+\end_layout
-\layout Standard
+\begin_layout Standard
Variables declared with this storage class will be allocated into the indirectly
addressable portion of the internal ram of a 8051, e.g.:
+\end_layout
-\layout Verse
+\begin_layout Verse
\family typewriter
__idata unsigned char test_idata;
+\end_layout
-\layout Standard
+\begin_layout Standard
Writing 0x01 to this variable generates the assembly code:
+\end_layout
-\layout Verse
+\begin_layout Verse
\family typewriter
-78r00\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-mov\SpecialChar ~
-\SpecialChar ~
+78r00\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+mov\InsetSpace ~
+\InsetSpace ~
r0,#_test_idata
\newline
-76\SpecialChar ~
-01\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-mov\SpecialChar ~
-\SpecialChar ~
+76\InsetSpace ~
+01\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+mov\InsetSpace ~
+\InsetSpace ~
@r0,#0x01
+\end_layout
-\layout Standard
+\begin_layout Standard
Please note, the first 128 byte of idata physically access the same RAM
as the data memory.
The original 8051 had 128 byte idata memory, nowadays most devices have
\end_inset
is located in idata memory.
+\end_layout
-\layout Subsubsection
+\begin_layout Subsubsection
pdata
\begin_inset LatexCommand \index{pdata (mcs51, ds390 storage class)}
\end_inset
+\end_layout
-\layout Standard
+\begin_layout Standard
Paged xdata access is just as straightforward as using the other addressing
modes of a 8051.
It is typically located at the start of xdata and has a maximum size of
default
\series default
storage class for the Medium Memory model, e.g.:
+\end_layout
-\layout Verse
+\begin_layout Verse
\family typewriter
__pdata unsigned char test_pdata;
+\end_layout
-\layout Standard
+\begin_layout Standard
Writing 0x01 to this variable generates the assembly code:
+\end_layout
-\layout Verse
+\begin_layout Verse
\family typewriter
-78r00\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+78r00\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
mov r0,#_test_pdata
\newline
-74 01\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+74 01\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
mov a,#0x01
\newline
-F2\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+F2\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
movx @r0,a
+\end_layout
-\layout Standard
+\begin_layout Standard
If the -
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
option is used the pdata memory area is followed by the xstack memory area
and the sum of their sizes is limited to 256 bytes.
+\end_layout
-\layout Subsubsection
+\begin_layout Subsubsection
code
\begin_inset LatexCommand \index{code}
\end_inset
+\end_layout
-\layout Standard
+\begin_layout Standard
'Variables' declared with this storage class will be placed in the code
memory:
+\end_layout
-\layout Verse
+\begin_layout Verse
\family typewriter
__code unsigned char test_code;
+\end_layout
-\layout Standard
+\begin_layout Standard
Read access to this variable generates the assembly code:
+\end_layout
-\layout Verse
+\begin_layout Verse
\family typewriter
-90s00r6F\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+90s00r6F\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
mov dptr,#_test_code
\newline
-E4\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+E4\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
clr a
\newline
-93\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+93\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
movc a,@a+dptr
+\end_layout
-\layout Standard
+\begin_layout Standard
\family typewriter
char
\family default
indexed arrays of characters in code memory can be accessed efficiently:
+\end_layout
-\layout Verse
+\begin_layout Verse
\family typewriter
__code char test_array[] = {'c','h','e','a','p'};
+\end_layout
-\layout Standard
+\begin_layout Standard
Read access to this array using an 8-bit unsigned index generates the assembly
code:
+\end_layout
-\layout Verse
+\begin_layout Verse
\family typewriter
-E5*00\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+E5*00\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
mov a,_index
+\end_layout
-\layout Verse
+\begin_layout Verse
\family typewriter
-90s00r41\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+90s00r41\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
mov dptr,#_test_array
+\end_layout
-\layout Verse
+\begin_layout Verse
\family typewriter
-93\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+93\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
movc a,@a+dptr
+\end_layout
-\layout Subsubsection
+\begin_layout Subsubsection
bit
\begin_inset LatexCommand \index{bit}
\end_inset
+\end_layout
-\layout Standard
+\begin_layout Standard
This is a data-type and a storage class specifier.
When a variable is declared as a bit, it is allocated into the bit addressable
memory of 8051, e.g.:
+\end_layout
-\layout Verse
+\begin_layout Verse
\family typewriter
__bit test_bit;
+\end_layout
-\layout Standard
+\begin_layout Standard
Writing 1 to this variable generates the assembly code:
+\end_layout
-\layout Verse
+\begin_layout Verse
\family typewriter
-D2*00\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-setb\SpecialChar ~
+D2*00\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+setb\InsetSpace ~
_test_bit
+\end_layout
-\layout Standard
+\begin_layout Standard
The bit addressable memory consists of 128 bits which are located from 0x20
to 0x2f in data memory.
\begin_inset Foot
-collapsed false
+status open
-\layout Standard
+\begin_layout Standard
Not really meant as examples, but nevertheless showing what bitfields are
about: device/include/mc68hc908qy.h and support/regression/tests/bitfields.c
+\end_layout
\end_inset
.
In accordance with ISO/IEC 9899 bits and bitfields without an explicit
signed modifier are implemented as unsigned.
+\end_layout
-\layout Subsubsection
+\begin_layout Subsubsection
sfr
\begin_inset LatexCommand \index{sfr}
\end_inset
+\end_layout
-\layout Standard
+\begin_layout Standard
Like the bit keyword,
\emph on
sfr / sfr16 / sfr32 / sbit
bit
\emph default
variables of a 8051, eg:
+\end_layout
-\layout Verse
+\begin_layout Verse
\family typewriter
__sfr __at
\end_inset
- (0x80) P0;\SpecialChar ~
+ (0x80) P0;\InsetSpace ~
/* special function register P0 at location 0x80 */
\newline
/* 16 bit
special function register combination for timer 0
\newline
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
with the high byte at
location 0x8C and the low byte at location 0x8A */
\newline
\end_inset
- (0xd7) CY;\SpecialChar ~
+ (0xd7) CY;\InsetSpace ~
/* CY (Carry Flag
\begin_inset LatexCommand \index{Flags}
\end_inset
) */
+\end_layout
-\layout Standard
+\begin_layout Standard
Special function registers which are located on an address dividable by
8 are bit-addressable, an
\emph on
this is not guaranteed.
\newline
+\end_layout
-\layout Standard
+\begin_layout Standard
Please note, if you use a header file which was written for another compiler
then the sfr / sfr16 / sfr32 / sbit Storage Class extensions will most
likely be
compatible.
Specifically the syntax
\family typewriter
-\SpecialChar ~
-sfr P0 = 0x80;\SpecialChar ~
+\InsetSpace ~
+sfr P0 = 0x80;\InsetSpace ~
\family default
is compiled
\family typewriter
\begin_inset Marginal
-collapsed true
+status collapsed
-\layout Standard
+\begin_layout Standard
\series bold
-\SpecialChar ~
+\InsetSpace ~
!
+\end_layout
\end_inset
).
+\end_layout
-\layout Subsubsection
+\begin_layout Subsubsection
Pointers
\begin_inset LatexCommand \index{Pointer}
\end_inset
to MCS51/DS390 specific memory spaces
+\end_layout
-\layout Standard
+\begin_layout Standard
SDCC allows (via language extensions) pointers to explicitly point to any
of the memory spaces
\begin_inset LatexCommand \index{Memory model}
\newline
Pointer
declaration examples:
+\end_layout
-\layout Verse
+\begin_layout Verse
\family typewriter
/* pointer physically in internal ram pointing to object in external ram
physically located in data space */
\newline
char (* __data fp)(void);
+\end_layout
-\layout Standard
+\begin_layout Standard
Well you get the idea.
\newline
\end_inset
type will generate the most efficient code.
+\end_layout
-\layout Subsubsection
+\begin_layout Subsubsection
Notes on MCS51 memory
\begin_inset LatexCommand \index{MCS51 memory}
\end_inset
layout
+\end_layout
-\layout Standard
+\begin_layout Standard
The 8051 family of microcontrollers have a minimum of 128 bytes of internal
RAM memory which is structured as follows:
\newline
- Bytes 30-7F - 80 bytes for general purpose use.
\newline
+\end_layout
-\layout Standard
+\begin_layout Standard
Additionally some members of the MCS51 family may have up to 128 bytes of
additional, indirectly addressable, internal RAM memory (
\emph on
\end_inset
-\SpecialChar ~
+\InsetSpace ~
Startup-Code).
+\end_layout
-\layout Standard
+\begin_layout Standard
Normally SDCC will only use the first bank
\begin_inset LatexCommand \index{register bank (mcs51, ds390)}
\emph default
-) should be used in interrupt
+) should be used for example in interrupt
\begin_inset LatexCommand \index{interrupt}
\end_inset
at address 0x22.
You can also use -
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
\emph default
and -
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
\newline
+\end_layout
-\layout Standard
+\begin_layout Standard
By default the 8051 linker will place the stack after the last byte of (i)data
variables.
Option -
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
) you can place the stack on it.
You may also need to use -
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
\emph default
) and -
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
to specify its size.
Same goes for the code memory, using -
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
and -
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
.
If in doubt, don't specify any options and see if the resulting memory
layout is appropriate, then you can adjust it.
+\end_layout
-\layout Standard
-\added_space_bottom bigskip
+\begin_layout Standard
The linker generates two files with memory allocation information.
The first, with extension .map
\begin_inset LatexCommand \index{<file>.map}
allocation, take a look at either the .map or .mem files to find out what
the problem is.
The .mem file may even suggest a solution to the problem.
+\begin_inset VSpace bigskip
+\end_inset
+\end_layout
-\layout Subsection
+\begin_layout Subsection
Z80/Z180 Storage Class
\begin_inset LatexCommand \index{Z80!Storage class}
\end_inset
Language Extensions
+\end_layout
-\layout Subsubsection
+\begin_layout Subsubsection
sfr
\begin_inset LatexCommand \index{sfr}
\end_inset
(in/out to 8-bit addresses)
+\end_layout
-\layout Standard
+\begin_layout Standard
The Z80
\begin_inset LatexCommand \index{Z80}
\end_inset
is accessed with special instructions, e.g.:
+\end_layout
-\layout Verse
+\begin_layout Verse
\family typewriter
-sfr at 0x78 IoPort;\SpecialChar ~
-\SpecialChar ~
+sfr at 0x78 IoPort;\InsetSpace ~
+\InsetSpace ~
/* define a var in I/O space at 78h called IoPort */
+\end_layout
-\layout Standard
+\begin_layout Standard
Writing 0x01 to this variable generates the assembly code:
+\end_layout
-\layout Verse
+\begin_layout Verse
\family typewriter
-3E 01\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+3E 01\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
ld a,#0x01
\newline
-D3 78\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+D3 78\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
out (_IoPort),a
+\end_layout
-\layout Subsubsection
+\begin_layout Subsubsection
banked sfr
\begin_inset LatexCommand \index{sfr}
\end_inset
(in/out to 16-bit addresses)
+\end_layout
-\layout Standard
+\begin_layout Standard
The keyword
\emph on
banked
\emph default
is used to support 16 bit addresses in I/O memory e.g.:
+\end_layout
-\layout Verse
+\begin_layout Verse
\family typewriter
sfr banked at
\end_inset
0x123 IoPort;
+\end_layout
-\layout Standard
+\begin_layout Standard
Writing 0x01 to this variable generates the assembly code:
+\end_layout
-\layout Verse
+\begin_layout Verse
\family typewriter
-01 23 01\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+01 23 01\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
ld bc,#_IoPort
\newline
-3E 01\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+3E 01\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
ld a,#0x01
\newline
-ED 79\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+ED 79\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
out (c),a
+\end_layout
-\layout Subsubsection
+\begin_layout Subsubsection
sfr
\begin_inset LatexCommand \index{sfr}
\end_inset
)
+\end_layout
-\layout Standard
-\added_space_bottom bigskip
+\begin_layout Standard
The compiler option -
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
\end_inset
-=180 (80) and a compiler #pragma\SpecialChar ~
+=180 (80) and a compiler #pragma\InsetSpace ~
portmode
\begin_inset LatexCommand \index{Z180!Pragmas!\#pragma portmode}
\family default
.
If you include the file z180.h this will be set automatically.
+\begin_inset VSpace bigskip
+\end_inset
+\end_layout
-\layout Subsection
+\begin_layout Subsection
HC08 Storage Class
\begin_inset LatexCommand \index{HC08!Storage class}
\end_inset
Language Extensions
+\end_layout
-\layout Subsubsection
+\begin_layout Subsubsection
data
\begin_inset LatexCommand \index{data (hc08 storage class)}
\end_inset
+\end_layout
-\layout Standard
+\begin_layout Standard
The data storage class declares a variable that resides in the first 256
bytes of memory (the direct page).
The HC08
\end_inset
is most efficient at accessing variables (especially pointers) stored here.
+\end_layout
-\layout Subsubsection
+\begin_layout Subsubsection
xdata
\begin_inset LatexCommand \index{xdata (hc08 storage class)}
\end_inset
+\end_layout
-\layout Standard
-\added_space_bottom bigskip
+\begin_layout Standard
The xdata storage class declares a variable that can reside anywhere in
memory.
This is the default if no storage class is specified.
+\begin_inset VSpace bigskip
+\end_inset
+\end_layout
-\layout Section
+\begin_layout Section
Absolute Addressing
\begin_inset LatexCommand \index{Absolute addressing}
\end_inset
+\end_layout
-\layout Standard
+\begin_layout Standard
Data items can be assigned an absolute address with the
\emph on
at
<address>
\emph default
keyword, in addition to a storage class, e.g.:
+\end_layout
-\layout Verse
+\begin_layout Verse
\family typewriter
xdata
\end_inset
0x7ffe unsigned int chksum;
+\end_layout
-\layout Standard
+\begin_layout Standard
or, better conforming to ISO/IEC 9899 C:
+\end_layout
-\layout Verse
+\begin_layout Verse
\family typewriter
__xdata __at (0x7ffe) unsigned int chksum;
+\end_layout
-\layout Standard
+\begin_layout Standard
In the above example the variable chksum will be located at 0x7ffe and 0x7fff
of the external ram.
The compiler does
\emph default
reserve any space for variables declared in this way
\begin_inset Marginal
-collapsed true
+status collapsed
-\layout Standard
+\begin_layout Standard
\series bold
-\SpecialChar ~
+\InsetSpace ~
!
+\end_layout
\end_inset
\end_inset
) are good places to look for such overlaps.
- Variables with an absolute address are
-\emph on
-not
-\begin_inset Marginal
-collapsed true
+\end_layout
-\layout Standard
-
-\series bold
-\SpecialChar ~
-!
+\begin_layout Standard
+If however you provide an initializer
+\begin_inset LatexCommand \index{Variable initialization}
\end_inset
+ actual memory allocation will take place and overlaps will be detected
+ by the linker.
+ E.g.:
+\end_layout
-\emph default
- initialized
-\begin_inset LatexCommand \index{Variable initialization}
+\begin_layout Verse
+\family typewriter
+__code __at (0x7ff0) char Id[5] =
+\begin_inset Quotes sld
\end_inset
-.
-
-\layout Standard
-In case of memory mapped I/O devices the keyword
+SDCC
+\begin_inset Quotes srd
+\end_inset
+
+;
+\end_layout
+
+\begin_layout Standard
+In the above example the variable Id will be located from 0x7ff0 to 0x7ff4
+ in code memory.
+\end_layout
+
+\begin_layout Standard
+In case of memory mapped I/O devices the keyword
\emph on
volatile
\emph default
has to be used to tell the compiler that accesses might not be removed:
+\end_layout
-\layout Verse
+\begin_layout Verse
\family typewriter
volatile
\end_inset
(0x8000) unsigned char PORTA_8255;
+\end_layout
-\layout Standard
+\begin_layout Standard
For some architectures (mcs51) array accesses are more efficient if an (xdata/fa
r) array
\family typewriter
\newline
Absolute addresses can be specified for variables in all
storage classes, e.g.:
+\end_layout
-\layout Verse
+\begin_layout Verse
\family typewriter
__bit
\end_inset
(0x02) bvar;
+\end_layout
-\layout Standard
+\begin_layout Standard
The above example will allocate the variable at offset 0x02 in the bit-addressab
le space.
There is no real advantage to assigning absolute addresses to variables
For example, if you have a routine that uses one or more of the microcontroller
I/O pins, and such pins are different for two different hardwares, you
can declare the I/O pins in your routine using:
+\end_layout
-\layout Verse
+\begin_layout Verse
\family typewriter
extern volatile
\end_inset
- __bit MOSI;\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+ __bit MOSI;\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
/* master out, slave in */
\newline
-extern volatile __bit MISO;\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+extern volatile __bit MISO;\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
/* master
in, slave out */
\newline
-extern volatile __bit MCLK;\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+extern volatile __bit MCLK;\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
/* master clock */
\newline
/* Input and
Output of a byte on a 3-wire serial bus.
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
If needed adapt polarity of clock,
polarity of data and bit order
\newline
-\SpecialChar ~
+\InsetSpace ~
*/
\newline
unsigned char spi_io(unsigned char out_byte)
\newline
{
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
unsigned char i=8;
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
do {
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
MOSI = out_byte & 0x80;
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
out_byte <<= 1;
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
MCLK =
1;
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-/* _asm nop _endasm; */\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+/* _asm nop _endasm; */\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
/* for slow peripherals */
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
if(MISO)
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
out_byte +=
1;
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
MCLK = 0;
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
} while(--i);
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
return out_byte;
\newline
}
+\end_layout
-\layout Standard
+\begin_layout Standard
Then, someplace in the code for the first hardware you would use
+\end_layout
-\layout Verse
+\begin_layout Verse
\family typewriter
__bit __at
\end_inset
- (0x80) MOSI;\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+ (0x80) MOSI;\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
/* I/O port 0, bit 0 */
\newline
-__bit __at (0x81) MISO;\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+__bit __at (0x81) MISO;\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
/* I/O port 0,
bit 1 */
\newline
-__bit __at (0x82) MCLK;\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+__bit __at (0x82) MCLK;\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
/* I/O port 0, bit 2 */
+\end_layout
-\layout Standard
+\begin_layout Standard
Similarly, for the second hardware you would use
+\end_layout
-\layout Verse
+\begin_layout Verse
\family typewriter
-__bit __at (0x83) MOSI;\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+__bit __at (0x83) MOSI;\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
/* I/O port 0, bit 3 */
\newline
-__bit __at (0x91) MISO;\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+__bit __at (0x91) MISO;\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
/*
I/O port 1, bit 1 */
\newline
\end_inset
- __at (0x92) MCLK;\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+ __at (0x92) MCLK;\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
/* I/O port 1, bit 2 */
+\end_layout
-\layout Standard
-\added_space_bottom bigskip
+\begin_layout Standard
and you can use the same hardware dependent routine without changes, as
for example in a library.
This is somehow similar to sbit, but only one absolute address has to be
specified in the whole project.
+\begin_inset VSpace bigskip
+\end_inset
+\end_layout
-\layout Section
+\begin_layout Section
Parameters
\begin_inset LatexCommand \index{Parameters}
\end_inset
+\end_layout
-\layout Standard
+\begin_layout Standard
Automatic (local) variables and parameters to functions can either be placed
on the stack or in data-space.
The default action of the compiler is to place these variables in the internal
- RAM (for small model) or external RAM (for large model).
+ RAM (for small model) or external RAM (for medium or large model).
This in fact makes them similar to
\emph on
static
\emph on
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
\emph default
option, by using
\emph on
-#pragma\SpecialChar ~
+#pragma\InsetSpace ~
stackauto
\emph default
\emph default
keyword in the function declaration, e.g.:
+\end_layout
-\layout Verse
+\begin_layout Verse
\family typewriter
unsigned char foo(char i) __reentrant
\newline
{
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
...
\newline
}
+\end_layout
-\layout Standard
+\begin_layout Standard
Since stack space on 8051 is limited, the
\emph on
reentrant
\emph on
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
\end_inset
addresses, e.g.:
+\end_layout
-\layout Verse
+\begin_layout Verse
\family typewriter
unsigned char foo()
\newline
{
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
__xdata unsigned char i;
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
__bit bvar;
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
__data __at
\begin_inset LatexCommand \index{at}
(0x31) unsigned char j;
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
...
\newline
}
+\end_layout
-\layout Standard
+\begin_layout Standard
In the above example the variable
\emph on
i
\emph on
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
reentrant
\emph default
this should only be done for static variables.
+\end_layout
-\layout Standard
+\begin_layout Standard
Parameters
\begin_inset LatexCommand \index{function parameter}
, (storage classes for parameters will be ignored), their allocation is
governed by the memory model in use, and the reentrancy options.
+\end_layout
-\layout Standard
+\begin_layout Standard
It is however allowed to use bit parameters in reentrant functions and also
non-static local bit variables are supported.
Efficient use is limited to 8 semi-bitregisters in bit space.
\end_inset
as a single byte just like the normal registers.
+\end_layout
-\layout Section
+\begin_layout Section
Overlaying
\begin_inset LatexCommand \label{sub:Overlaying}
\end_inset
+\end_layout
-\layout Standard
+\begin_layout Standard
For non-reentrant
\begin_inset LatexCommand \index{reentrant}
\end_inset
is specified for a local variable, it will NOT be overlayed.
+\end_layout
-\layout Standard
+\begin_layout Standard
Note that the compiler (not the linkage editor) makes the decision for overlayin
g the data items.
Functions that are called from an interrupt service routine
\begin_inset Marginal
-collapsed true
+status collapsed
-\layout Standard
+\begin_layout Standard
\series bold
!
+\end_layout
\end_inset
- should be preceded by a #pragma\SpecialChar ~
+ should be preceded by a #pragma\InsetSpace ~
nooverlay
\begin_inset LatexCommand \index{\#pragma nooverlay}
\end_inset
if they are not reentrant.
+\end_layout
-\layout Standard
+\begin_layout Standard
Also note that the compiler does not do any processing of inline assembler
code, so the compiler might incorrectly assign local variables and parameters
of a function into the overlay segment if the inline assembler code calls
other c-functions that might use the overlay.
- In that case the #pragma\SpecialChar ~
+ In that case the #pragma\InsetSpace ~
nooverlay should be used.
+\end_layout
-\layout Standard
+\begin_layout Standard
Parameters and local variables of functions that contain 16 or 32 bit multiplica
tion
\begin_inset LatexCommand \index{Multiplication}
will NOT be overlayed since these are implemented using external functions,
e.g.:
+\end_layout
-\layout Verse
+\begin_layout Verse
\family typewriter
#pragma save
\newline
{
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
P3 = errcd;
\newline
}
\newline
{
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
...
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
set_error(10);
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
...
\newline
}
+\end_layout
-\layout Standard
-\added_space_bottom bigskip
+\begin_layout Standard
In the above example the parameter
\emph on
errcd
\emph on
set_error
\emph default
- would be assigned to the overlayable segment if the #pragma\SpecialChar ~
+ would be assigned to the overlayable segment if the #pragma\InsetSpace ~
nooverlay was
not present, this could cause unpredictable runtime behavior when called
from an interrupt service routine.
- The #pragma\SpecialChar ~
+ The #pragma\InsetSpace ~
nooverlay ensures that the parameters and local variables for
the function are NOT overlayed.
+\begin_inset VSpace bigskip
+\end_inset
+\end_layout
-\layout Section
+\begin_layout Section
Interrupt Service Routines
\begin_inset LatexCommand \label{sub:Interrupt-Service-Routines}
\end_inset
+\end_layout
-\layout Subsection
+\begin_layout Subsection
General Information
+\end_layout
-\layout Standard
+\begin_layout Standard
SDCC allows
\emph on
i
r
\emph default
outines to be coded in C, with some extended keywords.
+\end_layout
-\layout Verse
+\begin_layout Verse
\family typewriter
void timer_isr (void) __interrupt (1) __using (1)
\newline
{
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
...
\newline
}
+\end_layout
-\layout Standard
+\begin_layout Standard
The optional number following the
\emph on
interrupt
\newline
Interrupt service routines open the door for some very interesting bugs:
+\end_layout
-\layout Subsubsection
+\begin_layout Subsubsection
\begin_inset LatexCommand \label{sub:Common-interrupt-pitfall-volatile}
\end_inset
Common interrupt pitfall: variable not declared
\emph on
volatile
+\end_layout
-\layout Standard
+\begin_layout Standard
If an interrupt service routine changes variables which are accessed by
other functions these variables have to be declared
\emph on
\end_inset
.
+\end_layout
-\layout Subsubsection
+\begin_layout Subsubsection
\begin_inset LatexCommand \label{sub:Common-interrupt-pitfall-non-atomic}
\end_inset
Common interrupt pitfall:
\emph on
non-atomic access
+\end_layout
-\layout Standard
+\begin_layout Standard
If the access to these variables is not
\emph on
atomic
\family typewriter
-flags\SpecialChar ~
-|=\SpecialChar ~
+flags\InsetSpace ~
+|=\InsetSpace ~
0x80;
\family default
\family typewriter
-flags\SpecialChar ~
-|=\SpecialChar ~
+flags\InsetSpace ~
+|=\InsetSpace ~
0x40;
\family default
\family typewriter
-counter\SpecialChar ~
-+=\SpecialChar ~
+counter\InsetSpace ~
++=\InsetSpace ~
8;
\family default
Bugs like these are hard to reproduce and can
cause a lot of trouble.
+\end_layout
-\layout Subsubsection
+\begin_layout Subsubsection
\begin_inset LatexCommand \label{sub:Common-interrupt-pitfall-stack-overflow}
\end_inset
Common interrupt pitfall:
\emph on
stack overflow
+\end_layout
-\layout Standard
+\begin_layout Standard
The return address and the registers used in the interrupt service routine
are saved on the stack
\begin_inset LatexCommand \index{stack}
subroutine when the stack is already in use for f.e.
many return addresses.
+\end_layout
-\layout Subsubsection
+\begin_layout Subsubsection
\begin_inset LatexCommand \label{sub:Common-interrupt-pitfall-non-reentrant}
\end_inset
Common interrupt pitfall:
\emph on
use of non-reentrant functions
+\end_layout
-\layout Standard
+\begin_layout Standard
A special note here, int (16 bit) and long (32 bit) integer division
\begin_inset LatexCommand \index{Division}
\emph on
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
\emph on
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
required by ANSI C can cause 16 bit routines to be used
\begin_inset Marginal
-collapsed true
+status collapsed
-\layout Standard
+\begin_layout Standard
\series bold
-\SpecialChar ~
+\InsetSpace ~
!
+\end_layout
\end_inset
\end_inset
.
+\end_layout
-\layout Standard
-\added_space_bottom bigskip
+\begin_layout Standard
Calling other functions from an interrupt service routine is not recommended,
avoid it if possible.
Note that when some function is called from an interrupt service routine
- it should be preceded by a #pragma\SpecialChar ~
+ it should be preceded by a #pragma\InsetSpace ~
nooverlay
\begin_inset LatexCommand \index{\#pragma nooverlay}
\end_inset
-\SpecialChar ~
+\InsetSpace ~
about Overlaying and section
\begin_inset LatexCommand \ref{sub:Functions-using-private-banks}
\end_inset
-\SpecialChar ~
+\InsetSpace ~
about Functions using private register banks.
+\begin_inset VSpace bigskip
+\end_inset
+\end_layout
-\layout Subsection
+\begin_layout Subsection
MCS51/DS390 Interrupt Service Routines
+\end_layout
-\layout Standard
+\begin_layout Standard
Interrupt
\begin_inset LatexCommand \index{interrupt}
to the maximum interrupt number specified.
\newline
+\end_layout
-\layout Standard
+\begin_layout Standard
\align center
\begin_inset Tabular
<lyxtabular version="3" rows="9" columns="3">
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
Interrupt #
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
Description
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
Vector Address
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
0
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
External 0
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
0x0003
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
1
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
Timer 0
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
0x000b
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
2
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
External 1
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
0x0013
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
3
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
Timer 1
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
0x001b
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
4
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
Serial
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
0x0023
+\end_layout
\end_inset
</cell>
<cell multicolumn="1" alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
5
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
Timer 2 (8052)
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
0x002b
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
...
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
...
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
n
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
0x0003 + 8*n
+\end_layout
\end_inset
</cell>
\newline
+\end_layout
-\layout Standard
+\begin_layout Standard
If the interrupt service routine is defined without
\emph on
using
stack.
This scheme may be advantageous for small interrupt service routines which
have low register usage.
+\end_layout
-\layout Standard
-\added_space_bottom bigskip
+\begin_layout Standard
If the interrupt service routine is defined to be using a specific register
bank then only
\emph on
.
This scheme is recommended for larger interrupt service routines.
+\begin_inset VSpace bigskip
+\end_inset
+\end_layout
-\layout Subsection
+\begin_layout Subsection
HC08
\begin_inset LatexCommand \index{HC08}
\end_inset
Interrupt Service Routines
+\end_layout
-\layout Standard
-\added_space_bottom bigskip
+\begin_layout Standard
Since the number of interrupts
\begin_inset LatexCommand \index{HC08!interrupt}
\end_inset
for details on customizing startup.
+\begin_inset VSpace bigskip
+\end_inset
+\end_layout
-\layout Subsection
+\begin_layout Subsection
Z80 Interrupt Service Routines
+\end_layout
-\layout Standard
+\begin_layout Standard
The Z80
\begin_inset LatexCommand \index{Z80}
vector depending on the hardware implementation.
Therefore, SDCC ignores the optional interrupt number and does not attempt
to generate an interrupt vector table.
+\end_layout
-\layout Standard
+\begin_layout Standard
By default, SDCC generates code for a maskable interrupt, which uses a RETI
instruction to return from the interrupt.
To write an interrupt handler for the non-maskable interrupt, which needs
critical
\emph default
keyword:
+\end_layout
-\layout Verse
+\begin_layout Verse
\family typewriter
void nmi_isr (void) critical interrupt
\newline
{
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
...
\newline
}
+\end_layout
-\layout Standard
-\added_space_bottom bigskip
+\begin_layout Standard
However if you need to create a non-interruptable interrupt service routine
you would also require the
\emph on
keyword.
To distinguish between this and an nmi_isr you must provide an interrupt
number.
+\begin_inset VSpace bigskip
+\end_inset
+\end_layout
-\layout Section
+\begin_layout Section
Enabling and Disabling Interrupts
+\end_layout
-\layout Subsection
+\begin_layout Subsection
Critical Functions and Critical Statements
+\end_layout
-\layout Standard
+\begin_layout Standard
A special keyword may be associated with a block or a function declaring
it as
\emph on
\end_inset
for each call.
+\end_layout
-\layout Verse
+\begin_layout Verse
\family typewriter
int foo () __critical
\newline
{
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
...
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
...
\newline
}
+\end_layout
-\layout Standard
+\begin_layout Standard
The critical attribute maybe used with other attributes like
\emph on
reentrant.
critical
\emph default
may also be used to disable interrupts more locally:
+\end_layout
-\layout Verse
+\begin_layout Verse
\family typewriter
__critical{ i++; }
+\end_layout
-\layout Standard
+\begin_layout Standard
More than one statement could have been included in the block.
+\end_layout
-\layout Subsection
+\begin_layout Subsection
Enabling and Disabling Interrupts directly
+\end_layout
-\layout Standard
+\begin_layout Standard
Interrupts
\begin_inset LatexCommand \index{interrupt}
\end_inset
can also be disabled and enabled directly (8051):
+\end_layout
-\layout Verse
-
-\family typewriter
-EA = 0;\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-or:\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\begin_layout Verse
+
+\family typewriter
+EA = 0;\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+or:\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
EA_SAVE = EA;
+\end_layout
-\layout Verse
-
-\family typewriter
-...\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\begin_layout Verse
+
+\family typewriter
+...\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
EA = 0;
+\end_layout
-\layout Verse
-
-\family typewriter
-EA = 1;\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\begin_layout Verse
+
+\family typewriter
+EA = 1;\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
...
+\end_layout
-\layout Verse
-
-\family typewriter
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\begin_layout Verse
+
+\family typewriter
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
EA = EA_SAVE;
+\end_layout
-\layout Standard
+\begin_layout Standard
On other architectures which have seperate opcodes for enabling and disabling
interrupts you might want to make use of defines with inline assembly
\begin_inset LatexCommand \index{Assembler routines}
\end_inset
):
+\end_layout
-\layout Verse
+\begin_layout Verse
\family typewriter
#define CLI _asm
\end_inset
-\SpecialChar ~
-\SpecialChar ~
-cli\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+cli\InsetSpace ~
+\InsetSpace ~
_endasm
\begin_inset LatexCommand \index{\_endasm}
\end_inset
;
+\end_layout
-\layout Verse
+\begin_layout Verse
\family typewriter
-#define SEI _asm\SpecialChar ~
-\SpecialChar ~
-sei\SpecialChar ~
-\SpecialChar ~
+#define SEI _asm\InsetSpace ~
+\InsetSpace ~
+sei\InsetSpace ~
+\InsetSpace ~
_endasm;
+\end_layout
-\layout Verse
+\begin_layout Verse
\family typewriter
...
+\end_layout
-\layout Standard
+\begin_layout Standard
Note: it is sometimes sufficient to disable only a specific interrupt source
like f.e.
a timer or serial interrupt by manipulating an
\emph default
register.
+\end_layout
-\layout Standard
+\begin_layout Standard
Usually the time during which interrupts are disabled should be kept as
short as possible.
This minimizes both
On a loudspeaker driven via a digital to analog converter which is fed
by an interrupt a latency of a few milliseconds might be tolerable, whereas
a much smaller jitter will be very audible.
+\end_layout
-\layout Standard
+\begin_layout Standard
You can reenable interrupts within an interrupt routine and on some architecture
s you can make use of two (or more) levels of
\emph on
and don't add complexity unless you have to.
+\end_layout
-\layout Subsection
+\begin_layout Subsection
Semaphore
\begin_inset LatexCommand \index{semaphore}
\end_inset
locking (mcs51/ds390)
+\end_layout
-\layout Standard
+\begin_layout Standard
Some architectures (mcs51/ds390) have an atomic
\begin_inset LatexCommand \index{atomic}
don't have to be disabled for the locking operation.
+\end_layout
-\layout Standard
+\begin_layout Standard
SDCC generates this instruction if the source follows this pattern:
+\end_layout
-\layout Verse
+\begin_layout Verse
\family typewriter
volatile
\newline
if (resource_is_free)
\newline
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
{
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
resource_is_free=0;
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
...
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
resource_is_free=1;
\newline
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
}
+\end_layout
-\layout Standard
+\begin_layout Standard
Note, mcs51 and ds390 support only an atomic
\begin_inset LatexCommand \index{atomic}
instruction (as opposed to atomic bit test and
\emph on
set).
+\end_layout
-\layout Section
+\begin_layout Section
Functions using private register banks
\begin_inset LatexCommand \label{sub:Functions-using-private-banks}
\end_inset
(mcs51/ds390)
+\end_layout
-\layout Standard
+\begin_layout Standard
Some architectures have support for quickly changing register sets.
SDCC supports this feature with the
\emph on
functions (see footnote below).
This will in most circumstances make the generated ISR code more efficient
since it will not have to save registers on the stack.
+\end_layout
-\layout Standard
+\begin_layout Standard
The
\emph on
using
\emph default
function (but may occasionally be useful anyway
\begin_inset Foot
-collapsed false
+status open
-\layout Standard
+\begin_layout Standard
possible exception: if a function is called ONLY from 'interrupt' functions
using a particular bank, it can be declared with the same 'using' attribute
as the calling 'interrupt' functions.
call memcpy(), it might make sense to create a specialized version of memcpy()
'using 1', since this would prevent the ISR from having to save bank zero
to the stack on entry and switch to bank zero before calling the function
+\end_layout
\end_inset
.
\emph on
)
+\end_layout
-\layout Standard
+\begin_layout Standard
An
\emph on
interrupt
If you have an ISR which can change priority at runtime, you're on your
own: I suggest using the default bank zero and taking the small performance
hit.
+\end_layout
-\layout Standard
-\added_space_bottom bigskip
+\begin_layout Standard
It is most efficient if your ISR calls no other functions.
If your ISR must call other functions, it is most efficient if those functions
use the same bank as the ISR (see note 1 below); the next best is if the
It is very inefficient to call a function using a different, non-zero bank
from an ISR.
+\begin_inset VSpace bigskip
+\end_inset
+\end_layout
-\layout Section
+\begin_layout Section
Startup Code
\begin_inset LatexCommand \label{sub:Startup-Code}
\end_inset
+\end_layout
-\layout Subsection
+\begin_layout Subsection
MCS51/DS390 Startup Code
+\end_layout
+
+\begin_layout Standard
+The compiler triggers the linker to link certain initialization modules
+ from the runtime library
+\begin_inset LatexCommand \index{Runtime library}
+
+\end_inset
+
+ called crt<something>.
+ Only the necessary ones are linked, for instance crtxstack.asm (GSINIT1,
+ GSINIT5) is not linked unless the -
+\series bold
+
+\begin_inset ERT
+status open
+
+\begin_layout Standard
+
+
+\backslash
+/
+\end_layout
+
+\end_inset
+
+
+\series default
+-xstack option is used.
+ These modules are highly entangled by the use of special segments/areas,
+ but a common layout is shown below:
+\end_layout
+
+\begin_layout Verse
+
+\family typewriter
+\series bold
+\size footnotesize
+(main.asm)
+\end_layout
+
+\begin_layout Verse
+
+\family typewriter
+\size footnotesize
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+.area HOME (CODE)
+\newline
+__interrupt_vect:
+\newline
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+ljmp __sdcc_gsinit_startup
+\end_layout
+
+\begin_layout Verse
+
+\family typewriter
+\series bold
+\size footnotesize
+(crtstart.asm)
+\end_layout
+
+\begin_layout Verse
+
+\family typewriter
+\size footnotesize
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+.area GSINIT0 (CODE)
+\newline
+__sdcc_gsinit_startup::
+\newline
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+mov sp,#__start__stack - 1
+\end_layout
+
+\begin_layout Verse
+
+\family typewriter
+\series bold
+\size footnotesize
+(crtxstack.asm)
+\end_layout
+
+\begin_layout Verse
+
+\family typewriter
+\size footnotesize
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+.area GSINIT1 (CODE)
+\newline
+__sdcc_init_xstack::
+\newline
+; Need to initialize in GSINIT1 in
+ case the user's __sdcc_external_startup uses the xstack.
+\newline
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+mov __XPAGE,#(__start__x
+stack >> 8)
+\newline
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+mov _spx,#__start__xstack
+\end_layout
+
+\begin_layout Verse
+
+\family typewriter
+\series bold
+\size footnotesize
+(crtstart.asm)
+\end_layout
+
+\begin_layout Verse
+
+\family typewriter
+\size footnotesize
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+.area GSINIT2 (CODE)
+\newline
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+lcall __sdcc_external_startup
+\newline
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+mov a,dpl
+\newline
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+jz __sdcc_init_data
+\newline
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+ljmp
+ __sdcc_program_startup
+\newline
+__sdcc_init_data:
+\end_layout
+
+\begin_layout Verse
+
+\family typewriter
+\series bold
+\size footnotesize
+(crtxinit.asm)
+\end_layout
+
+\begin_layout Verse
+
+\family typewriter
+\size footnotesize
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+.area GSINIT3 (CODE)
+\newline
+__mcs51_genXINIT::
+\newline
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+mov r1,#l_XINIT
+\newline
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+mov a,r1
+\newline
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+orl a,#(l_XINIT
+ >> 8)
+\newline
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+jz 00003$
+\newline
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+mov r2,#((l_XINIT+255) >> 8)
+\newline
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+mov dptr,#s_XINIT
+\newline
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+mov r0,#s_XISEG
+\newline
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+mov
+ __XPAGE,#(s_XISEG >> 8)
+\newline
+00001$:\InsetSpace ~
+clr a
+\newline
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+movc a,@a+dptr
+\newline
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+movx @r0,a
+\newline
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+inc dptr
+\newline
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+inc
+ r0
+\newline
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+cjne r0,#0,00002$
+\newline
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+inc __XPAGE
+\newline
+00002$:\InsetSpace ~
+djnz r1,00001$
+\newline
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+djnz r2,00001$
+\newline
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+mov __XPAGE,#0
+xFF
+\newline
+00003$:
+\end_layout
+
+\begin_layout Verse
+
+\family typewriter
+\series bold
+\size footnotesize
+(crtclear.asm)
+\end_layout
+
+\begin_layout Verse
+
+\family typewriter
+\size footnotesize
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+.area GSINIT4 (CODE)
+\newline
+__mcs51_genRAMCLEAR::
+\newline
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+clr a
+\newline
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+mov r0,#(l_IRAM-1)
+\newline
+00004$:\InsetSpace ~
+mov
+ @r0,a
+\newline
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+djnz r0,00004$
+\newline
+; _mcs51_genRAMCLEAR() end
+\end_layout
+
+\begin_layout Verse
+
+\family typewriter
+\series bold
+\size footnotesize
+(crtxclear.asm)
+\end_layout
+
+\begin_layout Verse
+
+\family typewriter
+\size footnotesize
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+.area GSINIT4 (CODE)
+\newline
+__mcs51_genXRAMCLEAR::
+\newline
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+mov r0,#l_PSEG
+\newline
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+mov a,r0
+\newline
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+orl a,#(l_PSEG
+ >> 8)
+\newline
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+jz 00006$
+\newline
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+mov r1,#s_PSEG
+\newline
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+mov __XPAGE,#(s_PSEG >> 8)
+\newline
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+clr a
+\newline
+00005$:\InsetSpace ~
+movx
+ @r1,a
+\newline
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+inc r1
+\newline
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+djnz r0,00005$
+\newline
+00006$:
+\newline
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+mov r0,#l_XSEG
+\newline
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+mov a,r0
+\newline
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+orl a,#(l_XSEG >>
+ 8)
+\newline
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+jz 00008$
+\newline
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+mov r1,#((l_XSEG + 255) >> 8)
+\newline
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+mov dptr,#s_XSEG
+\newline
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+clr a
+\newline
+00007$:\InsetSpace ~
+movx
+ @dptr,a
+\newline
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+inc dptr
+\newline
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+djnz r0,00007$
+\newline
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+djnz r1,00007$
+\newline
+00008$:
+\end_layout
+
+\begin_layout Verse
+
+\family typewriter
+\series bold
+\size footnotesize
+(crtxstack.asm)
+\end_layout
+
+\begin_layout Verse
+
+\family typewriter
+\size footnotesize
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+.area GSINIT5 (CODE)
+\newline
+; Need to initialize in GSINIT5 because __mcs51_genXINIT
+ modifies __XPAGE
+\newline
+; and __mcs51_genRAMCLEAR modifies _spx.
+\newline
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+mov __XPAGE,#(__start__x
+stack >> 8)
+\newline
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+mov _spx,#__start__xstack
+\end_layout
+
+\begin_layout Verse
+
+\family typewriter
+\series bold
+\size footnotesize
+(application modules)
+\end_layout
+
+\begin_layout Verse
+
+\family typewriter
+\size footnotesize
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+.area GSINIT (CODE)
+\end_layout
+
+\begin_layout Verse
+
+\family typewriter
+\series bold
+\size footnotesize
+(main.asm)
+\end_layout
+
+\begin_layout Verse
+
+\family typewriter
+\size footnotesize
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+.area GSFINAL (CODE)
+\newline
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+ljmp __sdcc_program_startup
+\newline
+;---------------------------------
+-----------------------
+\newline
+; Home
+\newline
+;--------------------------------------------------
+------
+\newline
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+.area HOME (CODE)
+\newline
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+.area CSEG (CODE)
+\newline
+__sdcc_program_startup:
+\newline
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+lcall _main
+\newline
+;
+ return from main will lock up
+\newline
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+sjmp .
+\end_layout
-\layout Standard
-The compiler inserts a call to the C routine
+\begin_layout Standard
+One of these modules (crtstart.asm) contains a call to the C routine
\emph on
_sdcc_external_startup()
\begin_inset LatexCommand \index{\_sdcc\_external\_startup()}
\series default
at the start of the CODE area.
- This routine is in the runtime library
+ This routine is also in the runtime library
\begin_inset LatexCommand \index{Runtime library}
\end_inset
-.
- By default this routine returns 0, if this routine returns a non-zero value,
- the static & global variable initialization will be skipped and the function
- main will be invoked.
+ and returns 0 by default.
+ If this routine returns a non-zero value, the static & global variable
+ initialization will be skipped and the function main will be invoked.
Otherwise static & global variables will be initialized before the function
main is invoked.
- You could add a
+ You could add an
\emph on
_sdcc_external_startup()
\emph default
\emph on
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
\emph default
is used.
(recommended for Chipcon CC1010).
+\end_layout
-\layout Standard
-\added_space_bottom bigskip
+\begin_layout Standard
See also the compiler options
\emph on
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
\emph on
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
\end_inset
about MCS51-variants.
+\newline
+
+\end_layout
+
+\begin_layout Standard
+While these initialization modules are meant as generic startup code there
+ might be the need for customization.
+ Let's assume the return value of
+\emph on
+_sdcc_external_startup()
+\emph default
+ in
+\emph on
+crtstart.asm
+\emph default
+ should not be checked (or
+\emph on
+_sdcc_external_startup()
+\emph default
+ should not be called at all).
+ The recommended way would be to copy
+\emph on
+crtstart.asm
+\emph default
+ (f.e.
+ from
+\begin_inset LatexCommand \url{http://sdcc.svn.sourceforge.net/viewvc/*checkout*/sdcc/trunk/sdcc/device/lib/mcs51/crtstart.asm}
+
+\end_inset
+
+) into the source directory, adapt it there, then assemble it with
+\emph on
+asx8051 -plosgff
+\begin_inset Foot
+status open
+
+\begin_layout Standard
+\begin_inset Quotes sld
+\end_inset
+
+-plosgff
+\begin_inset Quotes srd
+\end_inset
+
+ are the assembler options used in
+\begin_inset LatexCommand \url{http://sdcc.svn.sourceforge.net/viewvc/sdcc/trunk/sdcc/device/lib/mcs51/Makefile.in?view=markup }
+
+\end_inset
+
+
+\end_layout
+
+\end_inset
+
+ crtstart.asm
+\emph default
+ and when linking your project explicitely specify
+\emph on
+crtstart.rel
+\emph default
+.
+ As a bonus a listing of the relocated object file
+\emph on
+crtstart.rst
+\emph default
+ is generated.
+\end_layout
+
+\begin_layout Standard
+\begin_inset VSpace bigskip
+\end_inset
+\end_layout
-\layout Subsection
+\begin_layout Subsection
HC08 Startup Code
+\end_layout
-\layout Standard
-\added_space_bottom bigskip
+\begin_layout Standard
The HC08
\begin_inset LatexCommand \index{HC08}
\end_inset
startup code follows the same scheme as the MCS51 startup code.
+\begin_inset VSpace bigskip
+\end_inset
+\end_layout
-\layout Subsection
+\begin_layout Subsection
Z80 Startup Code
+\end_layout
-\layout Standard
-\added_space_bottom bigskip
+\begin_layout Standard
On the Z80
\begin_inset LatexCommand \index{Z80}
\emph default
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
and provide your own crt0.o.
+\begin_inset VSpace bigskip
+\end_inset
+\end_layout
-\layout Section
+\begin_layout Section
Inline Assembler Code
\begin_inset LatexCommand \index{Assembler routines}
\end_inset
+\end_layout
-\layout Subsection
+\begin_layout Subsection
A Step by Step Introduction
\begin_inset LatexCommand \label{sub:A-Step-by Assembler Introduction}
\end_inset
+\end_layout
-\layout Standard
+\begin_layout Standard
Starting from a small snippet of c-code this example shows for the MCS51
how to use inline assembly, access variables, a function parameter and
an array in xdata memory.
The example uses an MCS51 here but is easily adapted for other architectures.
This is a buffer routine which should be optimized:
+\end_layout
-\layout Verse
+\begin_layout Verse
\family typewriter
\size footnotesize
\newline
-unsigned char head, tail;\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+unsigned char head, tail;\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
/* if interrupts
\begin_inset LatexCommand \index{interrupt}
are involved see
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
section
\begin_inset LatexCommand \ref{sub:Common-interrupt-pitfall-volatile}
\newline
{
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
if( head != (unsigned char)(tail-1)
- )\SpecialChar ~
+ )\InsetSpace ~
/* cast
\series bold
needed
to integer */
\begin_inset Marginal
-collapsed true
+status collapsed
-\layout Standard
+\begin_layout Standard
\series bold
-\SpecialChar ~
+\InsetSpace ~
!
-
-\end_inset
-
-
-\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-buf[ head++ ] = c;\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\end_layout
+
+\end_inset
+
+
+\newline
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+buf[ head++ ] = c;\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
/* access to a 256 byte aligned array */
\newline
}
+\end_layout
-\layout Standard
+\begin_layout Standard
If the code snippet (assume it is saved in buffer.c) is compiled with SDCC
then a corresponding buffer.asm file is generated.
We define a new function
\begin_inset Quotes sld
\end_inset
+
+\series bold
_asm
+\series default
+
\begin_inset Quotes srd
\end_inset
\begin_inset Quotes sld
\end_inset
+
+\series bold
_endasm;
+\series default
+
\begin_inset Quotes srd
+\end_inset
+
+
+\begin_inset Foot
+status open
+
+\begin_layout Standard
+Note, that the single underscore form (_asm and _endasm) are not C99-compatible,
+ and for C-99 compatibility, the double-underscore form (__asm and __endasm)
+ has to be used.
+ The latter is also used in the library functions.
+\end_layout
+
\end_inset
to the beginning and the end of the function body:
+\end_layout
-\layout Verse
+\begin_layout Verse
\family typewriter
\size footnotesize
/* With a cut and paste from the .asm file, we have something to start with.
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
The
function is not yet OK! (registers aren't saved) */
\newline
\newline
{
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
_asm
\begin_inset LatexCommand \index{\_asm}
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-mov\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+mov\InsetSpace ~
+\InsetSpace ~
r2,dpl
\newline
-;buffer.c if( head != (unsigned char)(tail-1) ) \SpecialChar ~
+;buffer.c if( head != (unsigned char)(tail-1) ) \InsetSpace ~
/* cast
\series bold
needed
to integer */
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-mov\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+mov\InsetSpace ~
+\InsetSpace ~
a,_tail
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-dec\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+dec\InsetSpace ~
+\InsetSpace ~
a
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-mov\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+mov\InsetSpace ~
+\InsetSpace ~
r3,a
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-mov\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+mov\InsetSpace ~
+\InsetSpace ~
a,_head
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
cjne a,ar3,00106$
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
ret
\newline
00106$:
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-mov\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+mov\InsetSpace ~
+\InsetSpace ~
r3,_head
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-inc\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+inc\InsetSpace ~
+\InsetSpace ~
_head
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-mov\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+mov\InsetSpace ~
+\InsetSpace ~
dpl,r3
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-mov\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+mov\InsetSpace ~
+\InsetSpace ~
dph,#(_buf >> 8)
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-mov\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+mov\InsetSpace ~
+\InsetSpace ~
a,r2
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
movx @dptr,a
\newline
00103$:
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
ret
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
_endasm
\begin_inset LatexCommand \index{\_endasm}
;
\newline
}
+\end_layout
-\layout Standard
+\begin_layout Standard
The new file buffer.c should compile with only one warning about the unreferenced
function argument 'c'.
Now we hand-optimize the assembly code and insert an #define USE_ASSEMBLY
(1) and finally have:
+\end_layout
-\layout Verse
+\begin_layout Verse
\family typewriter
\size footnotesize
\newline
{
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
if(
head != (unsigned char)(tail-1) )
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
buf[ head++ ] = c;
\newline
}
\newline
{
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
c; // to avoid warning: unreferenced function argument
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
_asm
\begin_inset LatexCommand \index{\_asm}
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
; save used registers here.
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
; If we were still using r2,r3 we would have to push them here.
\newline
; if( head != (unsigned char)(tail-1) )
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-mov\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+mov\InsetSpace ~
a,_tail
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-dec\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+dec\InsetSpace ~
a
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-xrl\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+xrl\InsetSpace ~
a,_head
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
; we
could do an ANL a,#0x0f here to use a smaller buffer (see below)
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-jz\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+jz\InsetSpace ~
+\InsetSpace ~
t_b_end$
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
;
\newline
;
buf[ head++ ] = c;
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-mov\SpecialChar ~
- a,dpl \SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+mov\InsetSpace ~
+ a,dpl \InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
; dpl holds lower byte of function argument
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-mov\SpecialChar ~
-
- dpl,_head \SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+mov\InsetSpace ~
+
+ dpl,_head \InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
; buf is 0x100 byte aligned so head can be used directly
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-mov\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+mov\InsetSpace ~
dph,#(_bu
f>>8)
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
movx @dptr,a
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-inc \SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+inc \InsetSpace ~
_head
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
; we could do an ANL _head,#0x0f here to use a
smaller buffer (see above)
\newline
t_b_end$:
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
; restore used registers here
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
_endasm
\begin_inset LatexCommand \index{\_endasm}
}
\newline
#endif
+\end_layout
-\layout Standard
+\begin_layout Standard
The inline assembler code can contain any valid code understood by the assembler
, this includes any assembler directives and comment lines.
The assembler does not like some characters like ':' or ''' in comments.
\end_inset
or online at
-\begin_inset LatexCommand \url{http://svn.sourceforge.net/viewvc/*checkout*/sdcc/trunk/sdcc/as/doc/asxhtm.html}
+\begin_inset LatexCommand \url{http://sdcc.svn.sourceforge.net/viewvc/*checkout*/sdcc/trunk/sdcc/as/doc/asxhtm.html}
\end_inset
-\SpecialChar ~
+\InsetSpace ~
.
+\end_layout
-\layout Standard
+\begin_layout Standard
The compiler does not do any validation of the code within the
\family typewriter
_asm
has to be done manually.
+\end_layout
-\layout Standard
+\begin_layout Standard
It is recommended that each assembly instruction (including labels) be placed
in a separate line (as the example shows).
When the -
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
SDCCpeeph.def
\emph default
before using this option.
+\end_layout
-\layout Subsection
+\begin_layout Subsection
Naked Functions
\begin_inset LatexCommand \label{sub:Naked-Functions}
\end_inset
+\end_layout
-\layout Standard
+\begin_layout Standard
A special keyword may be associated with a function declaring it as
\emph on
_naked
This is particularly useful for interrupt functions, which can have a large
(and often unnecessary) prologue/epilogue.
For example, compare the code generated by these two functions:
+\end_layout
-\layout Verse
+\begin_layout Verse
\family typewriter
volatile
\newline
{
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
counter++;
\newline
}
\newline
{
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
_asm
\begin_inset LatexCommand \index{\_asm}
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-inc\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+inc\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
_counter ; does not change flags, no need to save psw
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-reti\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+reti\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
; MUST explicitly
include ret or reti in _naked function.
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
_endasm
\begin_inset LatexCommand \index{\_endasm}
;
\newline
}
+\end_layout
-\layout Standard
+\begin_layout Standard
For an 8051 target, the generated simpleInterrupt looks like:
+\end_layout
-\layout Verse
+\begin_layout Verse
\family typewriter
Note, this is an
\newline
_simpleInterrupt:
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-push\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+push\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
acc
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-push\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+push\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
b
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
pu
-sh\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+sh\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
dpl
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-push\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+push\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
dph
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-push\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+push\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
psw
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-mov\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+mov\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
psw,#0x00
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-inc\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+inc\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
_counter
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-pop\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+pop\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
psw
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-pop\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+pop\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
dph
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-pop\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+pop\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
dpl
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-pop\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+pop\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
b
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-pop\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+pop\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
acc
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
reti
+\end_layout
-\layout Standard
+\begin_layout Standard
whereas nakedInterrupt looks like:
+\end_layout
-\layout Verse
+\begin_layout Verse
\family typewriter
_nakedInterrupt:
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-inc\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+inc\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
_counter ; does not change flags, no need to save psw
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-reti\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+reti\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
;
MUST explicitly include ret or reti in _naked function
+\end_layout
-\layout Standard
+\begin_layout Standard
The related directive #pragma exclude
\begin_inset LatexCommand \index{\#pragma exclude}
\end_inset
the registers.
+\end_layout
-\layout Standard
+\begin_layout Standard
While there is nothing preventing you from writing C code inside a
\family typewriter
_naked
\family default
function, there are many ways to shoot yourself in the foot doing this,
and it is recommended that you stick to inline assembler.
+\end_layout
-\layout Subsection
+\begin_layout Subsection
Use of Labels within Inline Assembler
+\end_layout
-\layout Standard
+\begin_layout Standard
SDCC allows the use of in-line assembler with a few restrictions regarding
labels.
- In older versions of the compiler all labels defined within inline assembler
- code
-\emph on
-had to be
-\emph default
- of the form
+ All labels defined within inline assembler code have to be of the form
+
\emph on
nnnnn$
\emph default
- where nnnn is a number less than 100 (which implies a limit of utmost 100
- inline assembler labels
+ where nnnnn is a number less than 100 (which implies a limit of utmost
+ 100 inline assembler labels
\emph on
per function
\emph default
)
\noun default
.
+\begin_inset Foot
+status open
+
+\begin_layout Standard
+This is a slightly more stringent rule than absolutely necessary, but stays
+ always on the safe side.
+ Labels in the form of nnnnn$ are local labels in the assembler, locality
+ of which is confined within two labels of the standard form.
+ The compiler uses the same form for labels within a function (but starting
+ from nnnnn=00100); and places always a standard label at the beginning
+ of a function, thus limiting the locality of labels within the scope of
+ the function.
+ So, if the inline assembler part would be embedded into C-code, an improperly
+ placed non-local label in the assembler would break up the reference space
+ for labels created by the compiler for the C-code, leading to an assembling
+ error.
+\end_layout
+
+\begin_layout Standard
+The numeric part of local labels does not need to have 5 digits (although
+ this is the form of labels output by the compiler), any valid integer will
+ do.
+ Please refer to the assemblers documentation for further details.
+\end_layout
+
+\end_inset
+
+\end_layout
-\layout Verse
+\begin_layout Verse
\family typewriter
_asm
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-mov\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+mov\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
b,#10
\newline
00001$:
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-djnz\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+djnz\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
b,00001$
\newline
_endasm
\end_inset
;
+\end_layout
-\layout Standard
-Inline assembler code cannot reference any C-Labels, however it can reference
+\begin_layout Standard
+Inline assembler code cannot reference any C-labels, however it can reference
labels
\begin_inset LatexCommand \index{Labels}
\end_inset
defined by the inline assembler, e.g.:
+\end_layout
-\layout Verse
+\begin_layout Verse
\family typewriter
foo() {
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
/* some c code */
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
_asm
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
; some assembler code
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-ljmp $0003
-\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+ljmp 0003$
+\newline
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
_endasm;
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
/* some more c code */
\newline
-clabel:\SpecialChar ~
-\SpecialChar ~
+clabel:\InsetSpace ~
+\InsetSpace ~
/* inline assembler cannot reference this
label */
+\begin_inset Foot
+status open
+
+\begin_layout Standard
+Here, the C-label
+\family typewriter
+clabel
+\family default
+ is translated by the compiler into a local label, so the locality of labels
+ within the function is not broken.
+\end_layout
+
+\end_inset
+
+
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
_asm
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-$0003: ;label (can be referenced by inline assembler only)
-
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+0003$: ;label (can be referenced by inline assembler only)
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
_endasm
\begin_inset LatexCommand \index{\_endasm}
;
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
/* some more c code */
\newline
}
+\end_layout
-\layout Standard
+\begin_layout Standard
In other words inline assembly code can access labels defined in inline
assembly within the scope of the function.
The same goes the other way, i.e.
labels defines in inline assembly can not be accessed by C statements.
+\end_layout
-\layout Section
+\begin_layout Section
Interfacing with Assembler Code
\begin_inset LatexCommand \index{Assembler routines}
\end_inset
+\end_layout
-\layout Subsection
+\begin_layout Subsection
Global Registers used for Parameter Passing
\begin_inset LatexCommand \index{Parameter passing}
\end_inset
+\end_layout
-\layout Standard
+\begin_layout Standard
The compiler always uses the global registers
\emph on
DPL, DPH
\emph default
- to pass the first parameter to a routine.
- The second parameter onwards is either allocated on the stack (for reentrant
- routines or if -
-\begin_inset ERT
-status Collapsed
-
-\layout Standard
-
-
-\backslash
-/
+ to pass the first (non-bit) parameter to a function, and also to pass the
+ return value
+\begin_inset LatexCommand \index{return value}
\end_inset
--stack-auto is used) or in data / xdata memory (depending on the memory
- model).
+of function; according to the following scheme: one byte return value in
-
-\layout Subsection
-Assembler Routine (non-reentrant)
-
-\layout Standard
-In the following example
-\begin_inset LatexCommand \index{reentrant}
-
-\end_inset
-
-
-\begin_inset LatexCommand \index{Assembler routines (non-reentrant)}
-
-\end_inset
-
- the function c_func calls an assembler routine asm_func, which takes two
- parameters
-\begin_inset LatexCommand \index{function parameter}
-
+\emph on
+DPL
+\emph default
+, two byte value in
+\emph on
+DPL
+\emph default
+ (LSB) and
+\emph on
+DPH
+\emph default
+ (MSB).
+ three byte values (generic pointers) in
+\emph on
+DPH
+\emph default
+,
+\emph on
+DPL
+\emph default
+ and
+\emph on
+B
+\emph default
+, and four byte values in
+\emph on
+DPH
+\emph default
+,
+\emph on
+DPL
+\emph default
+,
+\emph on
+ B
+\emph default
+ and
+\emph on
+ACC
+\emph default
+.
+ Generic pointers
+\begin_inset LatexCommand \index{generic pointer}
+
+\end_inset
+
+ contain type of accessed memory in
+\emph on
+B
+\emph default
+:
+\series bold
+0x00
+\series default
+ -- xdata/far,
+\series bold
+0x40
+\series default
+ -- idata/near -- ,
+\series bold
+0x60
+\series default
+ -- pdata,
+\series bold
+0x80
+\series default
+ -- code
+\begin_inset Note Note
+status collapsed
+
+\begin_layout Standard
+This might not be the case of certain memory models (medium???)
+\end_layout
+
+\end_inset
+
+.
+\end_layout
+
+\begin_layout Standard
+The second parameter onwards is either allocated on the stack (for reentrant
+ routines or if -
+\begin_inset ERT
+status collapsed
+
+\begin_layout Standard
+
+
+\backslash
+/
+\end_layout
+
+\end_inset
+
+-stack-auto is used) or in data/xdata memory (depending on the memory model).
+\end_layout
+
+\begin_layout Standard
+Bit parameters are passed in a virtual register called 'bits' in bit-addressable
+ space for reentrant functions or allocated directly in bit memory otherwise.
+\end_layout
+
+\begin_layout Standard
+Functions (with two or more parameters or bit parameters) that are called
+ through function pointers
+\begin_inset LatexCommand \index{function pointers}
+
+\end_inset
+
+ must therefor be reentrant so the compiler knows how to pass the parameters.
+\end_layout
+
+\begin_layout Subsection
+Registers usage
+\end_layout
+
+\begin_layout Standard
+Unless the called function is declared as
+\family typewriter
+_naked
+\family default
+
+\begin_inset LatexCommand \index{naked}
+
+\end_inset
+
+, or the -
+\begin_inset ERT
+status collapsed
+
+\begin_layout Standard
+
+
+\backslash
+/
+\end_layout
+
+\end_inset
+
+-callee-saves
+\begin_inset LatexCommand \index{-\/-callee-saves}
+
+\end_inset
+
+/-
+\begin_inset ERT
+status collapsed
+
+\begin_layout Standard
+
+
+\backslash
+/
+\end_layout
+
+\end_inset
+
+-all-callee-saves command line option or the corresponding callee_saves
+ pragma are used, the caller will save the registers (
+\emph on
+R0-R7
+\emph default
+) around the call, so the called function can destroy they content freely.
+\end_layout
+
+\begin_layout Standard
+If the called function is not declared as
+\family typewriter
+_naked
+\family default
+, the caller will swap register banks around the call, if caller and callee
+ use different register banks (having them defined by the
+\family typewriter
+_using
+\family default
+ modifier).
+
+\end_layout
+
+\begin_layout Standard
+The called function can also use
+\emph on
+DPL
+\emph default
+,
+\emph on
+DPH
+\emph default
+,
+\emph on
+B
+\emph default
+ and
+\emph on
+ACC
+\emph default
+ observing that they are used for parameter/return value passing.
+\end_layout
+
+\begin_layout Subsection
+Assembler Routine (non-reentrant)
+\end_layout
+
+\begin_layout Standard
+In the following example
+\begin_inset LatexCommand \index{reentrant}
+
+\end_inset
+
+
+\begin_inset LatexCommand \index{Assembler routines (non-reentrant)}
+
+\end_inset
+
+ the function c_func calls an assembler routine asm_func, which takes two
+ parameters
+\begin_inset LatexCommand \index{function parameter}
+
\end_inset
.
+\end_layout
-\layout Verse
+\begin_layout Verse
\family typewriter
extern int asm_func(unsigned char, unsigned char);
\newline
{
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
return asm_func(i,j);
\newline
}
\newline
{
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
return c_func(10,9);
\newline
}
+\end_layout
-\layout Standard
+\begin_layout Standard
The corresponding assembler function is:
+\end_layout
-\layout Verse
+\begin_layout Verse
\family typewriter
.globl _asm_func_PARM_2
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
.globl _asm_func
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
.area OSEG
\newline
_asm_func_PARM_2:
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
.ds
1
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
.area CSEG
\newline
_asm_func:
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-mov\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+mov\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
a,dpl
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-add\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+add\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
a,_asm_func_PARM_2
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-mov\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+mov\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
dpl,a
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-mov\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+mov\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
dph
\begin_inset LatexCommand \index{DPTR, DPH, DPL}
,#0x00
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
ret
+\end_layout
-\layout Standard
-Note here that the return values
-\begin_inset LatexCommand \index{return value}
-
-\end_inset
-
- are placed in 'dpl' - One byte return value, 'dpl' LSB & 'dph' MSB for
- two byte values.
- 'dpl', 'dph' and 'b' for three byte values (generic pointers) and 'dpl','dph','
-b' & 'acc' for four byte values.
-
-\layout Standard
+\begin_layout Standard
The parameter naming convention is _<function_name>_PARM_<n>, where n is
the parameter number starting from 1, and counting from the left.
The first parameter is passed in
-\begin_inset Quotes eld
-\end_inset
-
-dpl
-\begin_inset Quotes erd
-\end_inset
-
- for a one byte parameter,
-\begin_inset Quotes eld
-\end_inset
-
-dptr
-\begin_inset Quotes erd
-\end_inset
-
- for two bytes,
-\begin_inset Quotes eld
-\end_inset
-
-b,dptr
-\begin_inset Quotes erd
-\end_inset
-
- for three bytes and
-\begin_inset Quotes eld
-\end_inset
-
-acc,b,dptr
-\begin_inset Quotes erd
-\end_inset
-
- for a four bytes parameter.
+\emph on
+DPH
+\emph default
+,
+\emph on
+DPL
+\emph default
+,
+\emph on
+B
+\emph default
+ and
+\emph on
+ACC
+\emph default
+ according to the description above.
The variable name for the second parameter will be _<function_name>_PARM_2.
\newline
\family sans
\series bold
sdcc cfunc.c asmfunc.rel
+\end_layout
-\layout Subsection
+\begin_layout Subsection
Assembler Routine (reentrant)
+\end_layout
-\layout Standard
+\begin_layout Standard
In this case
\begin_inset LatexCommand \index{reentrant}
onwards will be passed on the stack, the parameters are pushed from right
to left i.e.
- after the call the leftmost parameter will be on the top of the stack.
+ before the call the second leftmost parameter will be on the top of the
+ stack (the leftmost parameter is passed in registers).
Here is an example:
+\end_layout
-\layout Verse
+\begin_layout Verse
\family typewriter
-extern int asm_func(unsigned char, unsigned char);
+extern int asm_func(unsigned char, unsigned char, unsigned char) reentrant;
\newline
\newline
-int c_func (unsigned char
- i, unsigned char j) reentrant
+int
+ c_func (unsigned char i, unsigned char j, unsigned char k) reentrant
\newline
-{
+{
+
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-return asm_func(i,j);
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+return asm_func(i,j,k);
\newline
}
\newline
\newline
{
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-return
- c_func(10,9);
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+return c_func(10,9,8);
\newline
}
+\end_layout
-\layout Standard
-The corresponding assembler routine is:
+\begin_layout Standard
+The corresponding (unoptimized) assembler routine is:
+\end_layout
-\layout Verse
+\begin_layout Verse
\family typewriter
.globl _asm_func
\newline
_asm_func:
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-push _bp
-\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-mov _bp,sp
-\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-mov r2,dpl
-\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-mov a,_bp
-\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-add
- a,#0xfd
-\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-mov r0,a
-\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-add a,#0xfc ;?
-\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-mov r1,a
-\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-mov a,@r0
-\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-add a,r2 ;?
-\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-mov dpl,a
-
-\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-mov dph,#0x00
-\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-mov sp,_bp
-\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-pop _bp
-\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+push\InsetSpace ~
+_bp
+\newline
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+mov\InsetSpace ~
+\InsetSpace ~
+_bp,sp\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+;stack contains: _bp, return
+ address, second parameter, third parameter
+\newline
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+mov\InsetSpace ~
+\InsetSpace ~
+r2,dpl
+\newline
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+mov\InsetSpace ~
+\InsetSpace ~
+a,_bp
+\newline
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+add\InsetSpace ~
+\InsetSpace ~
+a,#0xfd\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+;calculate
+ pointer to the second parameter
+\newline
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+mov\InsetSpace ~
+\InsetSpace ~
+r0,a
+\newline
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+mov\InsetSpace ~
+\InsetSpace ~
+a,_bp
+\newline
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+add\InsetSpace ~
+\InsetSpace ~
+a,#0xfc\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+;calculate pointer
+ to the rightmost parameter
+\newline
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+mov\InsetSpace ~
+\InsetSpace ~
+r1,a
+\newline
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+mov\InsetSpace ~
+\InsetSpace ~
+a,@r0
+\newline
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+add\InsetSpace ~
+\InsetSpace ~
+a,@r1
+\newline
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+add\InsetSpace ~
+\InsetSpace ~
+a,r2\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+;calculate the
+ result (= sum of all three parameters)
+\newline
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+mov\InsetSpace ~
+\InsetSpace ~
+dpl,a\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+;return value goes into dptr
+ (cast into int)
+\newline
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+mov\InsetSpace ~
+\InsetSpace ~
+dph,#0x00
+\newline
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+mov\InsetSpace ~
+\InsetSpace ~
+sp,_bp
+\newline
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+pop\InsetSpace ~
+\InsetSpace ~
+_bp
+\newline
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
ret
+\end_layout
-\layout Standard
-\added_space_bottom bigskip
+\begin_layout Standard
The compiling and linking procedure remains the same, however note the extra
entry & exit linkage required for the assembler code, _bp is the stack
frame pointer and is used to compute the offset into the stack for parameters
and local variables.
+\begin_inset VSpace bigskip
+\end_inset
+\end_layout
-\layout Section
+\begin_layout Section
int (16 bit)
\begin_inset LatexCommand \index{int (16 bit)}
\end_inset
Support
+\end_layout
-\layout Standard
+\begin_layout Standard
For signed & unsigned int (16 bit) and long (32 bit) variables, division,
multiplication and modulus operations are implemented by support routines.
These support routines are all developed in ANSI-C to facilitate porting
found in <installdir>/share/sdcc/lib.
\newline
+\end_layout
-\layout Standard
+\begin_layout Standard
\align center
\begin_inset Tabular
<lyxtabular version="3" rows="11" columns="2">
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\series bold
Function
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\series bold
Description
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
_mulint.c
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
16 bit multiplication
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
_divsint.c
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
signed 16 bit division (calls _divuint)
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
_divuint.c
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
unsigned 16 bit division
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
_modsint.c
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
signed 16 bit modulus (calls _moduint)
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
_moduint.c
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
unsigned 16 bit modulus
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
_mullong.c
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
32 bit multiplication
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
_divslong.c
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
signed 32 division (calls _divulong)
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
_divulong.c
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
unsigned 32 division
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
_modslong.c
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
signed 32 bit modulus (calls _modulong)
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
_modulong.c
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
unsigned 32 bit modulus
+\end_layout
\end_inset
</cell>
\newline
+\end_layout
-\layout Standard
+\begin_layout Standard
Since they are compiled as
\emph on
non-reentrant
\emph on
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
\emph on
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
Notice that you don't have to call these routines directly.
The compiler will use them automatically every time an integer operation
is required.
+\end_layout
-\layout Section
+\begin_layout Section
Floating Point Support
\begin_inset LatexCommand \index{Floating point support}
\end_inset
+\end_layout
-\layout Standard
+\begin_layout Standard
SDCC supports IEEE (single precision 4 bytes) floating point numbers.
The floating point support routines are derived from gcc's floatlib.c and
consist of the following routines:
\newline
+\end_layout
-\layout Standard
+\begin_layout Standard
\align center
\size footnotesize
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\family roman
\series medium
\noun off
\color none
Function
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
Description
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\family roman
\series medium
\noun off
\color none
_fsadd.c
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\family roman
\series medium
\noun off
\color none
add floating point numbers
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\family roman
\series medium
\noun off
\color none
_fssub.c
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\family roman
\series medium
\noun off
\color none
subtract floating point numbers
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\family roman
\series medium
\noun off
\color none
_fsdiv.c
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\family roman
\series medium
\noun off
\color none
divide floating point numbers
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\family roman
\series medium
\noun off
\color none
_fsmul.c
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\family roman
\series medium
\noun off
\color none
multiply floating point numbers
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\family roman
\series medium
\noun off
\color none
_fs2uchar.c
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\family roman
\series medium
\noun off
\color none
convert floating point to unsigned char
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\family roman
\series medium
\noun off
\color none
_fs2char.c
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\family roman
\series medium
\noun off
\color none
convert floating point to signed char
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\family roman
\series medium
\noun off
\color none
_fs2uint.c
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\family roman
\series medium
\noun off
\color none
convert floating point to unsigned int
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\family roman
\series medium
\noun off
\color none
_fs2int.c
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\family roman
\series medium
\noun off
\color none
convert floating point to signed int
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\family roman
\series medium
\bar default
\noun default
c
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\family roman
\series medium
\noun off
\color none
convert floating point to unsigned long
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\family roman
\series medium
\noun off
\color none
_fs2long.c
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\family roman
\series medium
\noun off
\color none
convert floating point to signed long
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\family roman
\series medium
\noun off
\color none
_uchar2fs.c
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\family roman
\series medium
\noun off
\color none
convert unsigned char to floating point
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\family roman
\series medium
\noun off
\color none
_char2fs.c
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\family roman
\series medium
\noun off
\color none
convert char to floating point number
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\family roman
\series medium
\noun off
\color none
_uint2fs.c
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\family roman
\series medium
\noun off
\color none
convert unsigned int to floating point
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\family roman
\series medium
\noun off
\color none
_int2fs.c
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\family roman
\series medium
\noun off
\color none
convert int to floating point numbers
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\family roman
\series medium
\noun off
\color none
_ulong2fs.c
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\family roman
\series medium
\noun off
\color none
convert unsigned long to floating point number
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\family roman
\series medium
\noun off
\color none
_long2fs.c
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\family roman
\series medium
\noun off
\color none
convert long to floating point number
+\end_layout
\end_inset
</cell>
\newline
+\end_layout
-\layout Standard
-\added_space_bottom bigskip
+\begin_layout Standard
These support routines are developed in ANSI-C so there is room for space
and speed improvement
\begin_inset Foot
-collapsed false
+status open
-\layout Standard
+\begin_layout Standard
These floating point routines (
\emph on
not
\emph default
sinf(), cosf(), ...) for the mcs51 are implemented in assembler.
+\end_layout
\end_inset
Also notice that you don't have to call this routines directly.
The compiler will use them automatically every time a floating point operation
is required.
+\begin_inset VSpace bigskip
+\end_inset
+\end_layout
-\layout Section
+\begin_layout Section
Library Routines
\begin_inset LatexCommand \index{Libraries}
\end_inset
+\end_layout
-\layout Standard
+\begin_layout Standard
\emph on
<pending: this is messy and incomplete - a little more information is in
sdcc/doc/libdoc.txt
\emph default
>
+\end_layout
-\layout Subsection
+\begin_layout Subsection
Compiler support routines (_gptrget, _mulint etc.)
+\end_layout
-\layout Subsection
+\begin_layout Subsection
Stdclib functions (puts, printf, strcat etc.)
+\end_layout
-\layout Subsubsection
+\begin_layout Subsubsection
<stdio.h>
+\end_layout
-\layout Paragraph
+\begin_layout Paragraph
getchar(), putchar()
+\end_layout
-\layout Standard
+\begin_layout Standard
\begin_inset LatexCommand \index{<stdio.h>}
\end_inset
putchar()
\family default
routine might be a start:
+\end_layout
-\layout Verse
+\begin_layout Verse
\family typewriter
void putchar (char c) {
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-while (!TI)\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+while (!TI)\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
/* assumes UART is initialized */
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
;
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
TI
= 0;
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
SBUF = c;
\newline
}
+\end_layout
-\layout Paragraph
+\begin_layout Paragraph
printf()
+\end_layout
-\layout Standard
+\begin_layout Standard
The default
\family typewriter
printf()
\emph on
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
\emph on
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
\emph default
for the mcs51 port, since this uses a lot of memory.
+\end_layout
-\layout Standard
+\begin_layout Standard
If you're short on code memory you might want to use
\family typewriter
printf_small()
not
\emph default
support long variables and field widths).
- Be sure to only use only one of these printf options within a project.
+ Be sure to use only one of these printf options within a project.
\newline
+\end_layout
-\layout Standard
+\begin_layout Standard
Feature matrix of different
\emph on
printf
\emph default
options on mcs51.
+\end_layout
-\layout Standard
+\begin_layout Standard
\begin_inset Tabular
<lyxtabular version="3" rows="14" columns="7">
<features islongtable="true">
-<column alignment="left" valignment="center" leftline="true" width="14col%">
+<column alignment="left" valignment="middle" leftline="true" width="14col%">
<column alignment="center" valignment="top" leftline="true" width="0">
<column alignment="center" valignment="top" leftline="true" width="12col%">
<column alignment="center" valignment="top" leftline="true" width="10col%">
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\series bold
\size large
mcs51
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
printf
\begin_inset LatexCommand \index{printf}
\end_inset
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
printf
\size scriptsize
USE_FLOATS=1
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
printf_small
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
printf_fast
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
printf_fast_f
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
printf_tiny
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
filename
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size scriptsize
printf_large.c
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size scriptsize
printf_large.c
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size scriptsize
printfl.c
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size scriptsize
printf_fast.c
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size scriptsize
printf_fast_f.c
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size scriptsize
printf_tiny.c
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\begin_inset Quotes sld
\end_inset
\end_inset
size
+\end_layout
-\layout Standard
+\begin_layout Standard
small / large
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
1.7k / 2.4k
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
4.3k / 5.6k
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
1.2k / 1.8k
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
1.3k / 1.3k
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
1.9k / 1.9k
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
0.44k / 0.44k
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
code size
+\end_layout
-\layout Standard
+\begin_layout Standard
small / large
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
1.4k / 2.0k
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
2.8k / 3.7k
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
0.45k / 0.47k (+ _ltoa)
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
1.2k / 1.2k
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
1.6k / 1.6k
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
0.26k / 0.26k
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
formats
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
cdi
\emph on
o
\emph default
psux
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\family roman
\series medium
\bar no
\noun off
psux
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
c
\family roman
\series medium
\bar default
\noun default
x
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
cdsux
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
cdfsux
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
cdsux
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
long (32 bit) support
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
x
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
x
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
x
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
x
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\family roman
\series medium
\noun off
\color none
x
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
-
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
byte arguments on stack
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
b
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
b
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
-
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
-
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
-
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
-
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
float format
\begin_inset LatexCommand \index{Floating point support}
\end_inset
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
-
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
%f
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
-
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
-
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
%f
\begin_inset Foot
-collapsed true
+status collapsed
-\layout Standard
+\begin_layout Standard
Range limited to +/- 4294967040, precision limited to 8 digits past decimal
+\end_layout
\end_inset
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
-
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
float formats %e %g
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
-
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
-
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
-
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
-
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
-
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
-
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
field width
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
x
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
x
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
-
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
x
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
x
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
-
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
string speed
\begin_inset Foot
-collapsed true
+status collapsed
-\layout Standard
+\begin_layout Standard
Execution time of printf("%s%c%s%c%c%c", "Hello", ' ', "World", '!', '
\backslash
r', '
\backslash
n'); standard 8051 @ 22.1184 MHz, empty putchar()
+\end_layout
\end_inset
,
+\end_layout
-\layout Standard
+\begin_layout Standard
small / large
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
1.52 / 2.59 ms
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
1.53 / 2.62 ms
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
0.92 / 0.93 ms
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
0.45 / 0.45 ms
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
0.46 / 0.46 ms
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
0.45 / 0.45 ms
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
int speed
\begin_inset Foot
-collapsed true
+status collapsed
-\layout Standard
+\begin_layout Standard
Execution time of printf("%d", -12345); standard 8051 @ 22.1184 MHz, empty
putchar()
+\end_layout
\end_inset
,
+\end_layout
-\layout Standard
+\begin_layout Standard
small / large
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
3.01 / 3.61 ms
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
3.01 / 3.61 ms
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
3.51 / 18.13 ms
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
0.22 / 0.22 ms
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
0.23 / 0.23 ms
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
0.25 / 0.25 ms
\begin_inset Foot
-collapsed true
+status collapsed
-\layout Standard
+\begin_layout Standard
printf_tiny integer speed is data dependent, worst case is 0.33 ms
+\end_layout
\end_inset
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
long speed
\begin_inset Foot
-collapsed true
+status collapsed
-\layout Standard
+\begin_layout Standard
Execution time of printf("%ld", -123456789); standard 8051 @ 22.1184 MHz,
empty putchar()
+\end_layout
\end_inset
,
+\end_layout
-\layout Standard
+\begin_layout Standard
small / large
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
5.37 / 6.31 ms
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
5.37 / 6.31 ms
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
8.71 / 40.65 ms
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
0.40 / 0.40 ms
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
0.40 / 0.40 ms
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
-
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
float speed
\begin_inset Foot
-collapsed true
+status collapsed
-\layout Standard
+\begin_layout Standard
Execution time of printf("%.3f", -12345.678); standard 8051 @ 22.1184 MHz,
empty putchar()
+\end_layout
\end_inset
,
+\end_layout
-\layout Standard
+\begin_layout Standard
small / large
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
-
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
7.49 / 22.47 ms
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
-
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
-
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
1.04 / 1.04 ms
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
-
+\end_layout
\end_inset
</cell>
\end_inset
+\end_layout
-\layout Subsubsection
+\begin_layout Subsubsection
<malloc.h>
\begin_inset LatexCommand \index{malloc.h}
\end_inset
+\end_layout
-\layout Standard
+\begin_layout Standard
As of SDCC 2.6.2 you no longer need to call an initialization routine before
using dynamic memory allocation
\begin_inset LatexCommand \index{dynamic memory allocation (malloc)}
required size defined in HEAP_SIZE.
It is recommended to make a copy of this file into your project directory
and compile it there with:
+\end_layout
-\layout Verse
+\begin_layout Verse
\family typewriter
sdcc -c _heap.c -D HEAD_SIZE=2048
+\end_layout
-\layout Standard
+\begin_layout Standard
And then link it with:
+\end_layout
-\layout Verse
+\begin_layout Verse
\family typewriter
sdcc main.rel _heap.rel
+\end_layout
-\layout Subsection
+\begin_layout Subsection
Math functions (sinf, powf, sqrtf etc.)
+\end_layout
-\layout Subsubsection
+\begin_layout Subsubsection
<math.h>
+\end_layout
-\layout Standard
+\begin_layout Standard
See definitions in file <math.h>.
+\end_layout
-\layout Subsection
+\begin_layout Subsection
Other libraries
+\end_layout
-\layout Standard
+\begin_layout Standard
Libraries
\begin_inset LatexCommand \index{Libraries}
LGPL
\emph default
.
+\end_layout
-\layout Standard
-\begin_inset Note
-collapsed true
+\begin_layout Standard
+\begin_inset Note Note
+status collapsed
-\layout Standard
+\begin_layout Standard
license statements for the libraries are missing.
sdcc/device/lib/ser_ir.c
+\end_layout
-\layout Standard
+\begin_layout Standard
or _decdptr f.e.
come with a GPL (as opposed to LGPL) License - this will not be liberal
enough for many embedded programmers.
+\end_layout
\end_inset
+\end_layout
-\layout Standard
+\begin_layout Standard
If you have ported some library or want to share experience about some code
which f.e.
falls into any of these categories Busses (I
\end_inset
-\SpecialChar ~
+\InsetSpace ~
would certainly like to hear about it.
+\end_layout
-\layout Standard
-\added_space_bottom bigskip
+\begin_layout Standard
Programmers coding for embedded systems are not especially famous for being
enthusiastic, so don't expect a big hurray but as the mailing list is searchabl
e these references are very valuable.
Let's help to create a climate where information is shared.
+\begin_inset VSpace bigskip
+\end_inset
+\end_layout
-\layout Section
+\begin_layout Section
Memory Models
+\end_layout
-\layout Subsection
+\begin_layout Subsection
MCS51 Memory Models
\begin_inset LatexCommand \index{Memory model}
\end_inset
+\end_layout
-\layout Subsubsection
+\begin_layout Subsubsection
Small, Medium and Large
+\end_layout
-\layout Standard
+\begin_layout Standard
SDCC allows three memory models for MCS51 code,
\shape slanted
small, medium
medium and large.
The compiled library modules are contained in separate directories as small,
medium and large so that you can link to the appropriate set.
+\end_layout
-\layout Standard
+\begin_layout Standard
When the medium or large model is used all variables declared without a
storage class will be allocated into the external ram, this includes all
parameters and local variables (for non-reentrant
functions).
When the small model is used variables without storage class are allocated
in the internal ram.
+\end_layout
-\layout Standard
+\begin_layout Standard
Judicious usage of the processor specific storage classes
\begin_inset LatexCommand \index{Storage class}
Several optimizations are disabled when the program is compiled using the
large model, it is therefore recommended that the small model be used unless
absolutely required.
+\end_layout
-\layout Subsubsection
+\begin_layout Subsubsection
External Stack
\begin_inset LatexCommand \label{sub:External-Stack}
\end_inset
+\end_layout
-\layout Standard
+\begin_layout Standard
The external stack (-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
256 bytes).
When -
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
This option is provided for programs with large stack space requirements.
When used with the -
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
stack (note: support libraries will need to be recompiled with the same
options.
There is a predefined target in the library makefile).
+\end_layout
-\layout Standard
+\begin_layout Standard
The compiler outputs the higher order address byte of the external ram segment
into port P2
\begin_inset LatexCommand \index{P2 (mcs51 sfr)}
may not
\emph default
be used by the application program.
+\end_layout
-\layout Subsection
+\begin_layout Subsection
DS390 Memory Model
\begin_inset LatexCommand \index{Memory model}
\end_inset
+\end_layout
-\layout Standard
+\begin_layout Standard
The only model supported is Flat 24
\begin_inset LatexCommand \index{Flat 24 (DS390 memory model)}
\emph on
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
Segments may be placed anywhere in the 4 meg address space using the usual
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
\emph default
on the SDCC command line.
However, currently the linker can not handle code segments > 64k.
+\end_layout
-\layout Section
+\begin_layout Section
Pragmas
\begin_inset LatexCommand \label{sec:Pragmas}
\end_inset
+\end_layout
+
+\begin_layout Standard
+Pragmas are used to turn on and/or off certain compiler options.
+ Some of them are closely related to corresponding command-line options
+ (see section
+\begin_inset LatexCommand \vref{sec:Command-Line-Options}
+
+\end_inset
+
+).
+\newline
+Pragmas should be placed before and/or after a function, placing pragmas
+ inside a function body could have unpredictable results.
+\newline
-\layout Standard
-SDCC supports the following #pragma directives:
+\newline
+SDCC supports the
+ following #pragma directives:
+\end_layout
-\layout Itemize
+\begin_layout Itemize
\series bold
save
\end_inset
- this will save most current options to the save/restore stack.
- See #pragma\SpecialChar ~
+ See #pragma\InsetSpace ~
restore.
+\end_layout
-\layout Itemize
+\begin_layout Itemize
\series bold
restore
saves & restores can be nested.
SDCC uses a save/restore stack: save pushes current options to the stack,
restore pulls current options from the stack.
- See #pragma\SpecialChar ~
+ See #pragma\InsetSpace ~
save.
\newline
+\end_layout
-\layout Itemize
+\begin_layout Itemize
\series bold
callee_saves
\end_inset
- function1[,function2[,function3...]] - The compiler by default uses a caller
- saves convention for register saving across function calls, however this
- can cause unnecessary register pushing & popping
+ function1[,function2[,function3...]]
+\begin_inset LatexCommand \label{ite:callee_saves-function1[,function2[,function3...]]--}
+
+\end_inset
+
+- The compiler by default uses a caller saves convention for register saving
+ across function calls, however this can cause unnecessary register pushing
+ and popping
\begin_inset LatexCommand \index{push/pop}
\end_inset
This option can be used to switch off the register saving convention for
the function names specified.
The compiler will not save registers when calling these functions, extra
- code need to be manually inserted at the entry & exit for these functions
- to save & restore the registers used by these functions, this can SUBSTANTIALLY
- reduce code & improve run time performance of the generated code.
+ code need to be manually inserted at the entry and exit for these functions
+ to save and restore the registers used by these functions, this can SUBSTANTIAL
+LY reduce code and improve run time performance of the generated code.
In the future the compiler (with inter procedural analysis) may be able
to determine the appropriate scheme to use for each function call.
If -
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
+
+\end_inset
+
+-callee-saves command line option is used (see page
+\begin_inset LatexCommand \vpageref{lyx:--callee-saves-function1[,function2][,function3]...}
\end_inset
--callee-saves command line option is used, the function names specified
- in #pragma\SpecialChar ~
+), the function names specified in #pragma\InsetSpace ~
callee_saves
\begin_inset LatexCommand \index{\#pragma callee\_saves}
\end_inset
is appended to the list of functions specified in the command line.
+\end_layout
-\layout Itemize
+\begin_layout Itemize
\series bold
exclude
outines.
The directive should be placed immediately before the ISR function definition
and it affects ALL ISR functions following it.
- To enable the normal register saving for ISR functions use #pragma\SpecialChar ~
-exclude\SpecialChar ~
+ To enable the normal register saving for ISR functions use #pragma\InsetSpace ~
+exclude\InsetSpace ~
none
\begin_inset LatexCommand \index{\#pragma exclude}
\end_inset
.
+\end_layout
-\layout Itemize
+\begin_layout Itemize
\series bold
less_pedantic
\series default
-\begin_inset LatexCommand \index{\#pragma less\_pedantic}
-
-\end_inset
-
- - the compiler will not warn you anymore for obvious mistakes, you'r on
- your own now ;-(
-
-\layout Itemize
-
-\series bold
-disable_warning
-\series default
- <nnnn>
-\begin_inset LatexCommand \index{\#pragma disable\_warning}
+\begin_inset LatexCommand \index{pedantic}
\end_inset
- - the compiler will not warn you anymore about warning number <nnnn>.
-
-\layout Itemize
-
-\series bold
-nogcse
-\series default
-\begin_inset LatexCommand \index{\#pragma nogcse}
+\begin_inset LatexCommand \index{\#pragma less\_pedantic}
\end_inset
- - will stop global common subexpression elimination.
-
-\layout Itemize
-
-\series bold
-noinduction
-\series default
-
-\begin_inset LatexCommand \index{\#pragma noinduction}
+
+\begin_inset LatexCommand \label{ite:less_pedantic}
\end_inset
- - will stop loop induction optimizations.
+- the compiler will not warn you anymore for obvious mistakes, you're on
+ your own now ;-( .
+ See also the command line option -
+\begin_inset ERT
+status collapsed
-\layout Itemize
+\begin_layout Standard
-\series bold
-noinvariant
-\series default
-\begin_inset LatexCommand \index{\#pragma noinvariant}
+\backslash
+/
+\end_layout
\end_inset
- - will not do loop invariant optimizations.
- For more details see Loop Invariants in section
-\begin_inset LatexCommand \ref{sub:Loop-Optimizations}
+-less-pedantic
+\begin_inset LatexCommand \vpageref{lyx:--less-pedantic}
\end_inset
.
+
+\newline
+More specifically, the following warnings will be disabled:
+\shape italic
+comparison is always [true/false] due to limited range of data type
+\shape default
+ (94);
+\shape italic
+overflow in implicit constant conversion
+\shape default
+ (158); [the (in)famous]
+\shape italic
+conditional flow changed by optimizer: so said EVELYN the modified DOG
+\shape default
+ (110);
+\shape italic
+function '[function name]' must return value
+\shape default
+ (59).
+
+\newline
+Furthermore, warnings of less importance (of PEDANTIC and INFO warning
+ level) are disabled, too, namely:
+\shape italic
+constant value '[
+\begin_inset Note Note
+status collapsed
-\layout Itemize
+\begin_layout Standard
+dunno what comes here - this warning appears to be unused altogether
+\end_layout
-\series bold
-noiv
-\series default
+\end_inset
+
+]', out of range
+\shape default
+ (81);
+\shape italic
+[left/right] shifting more than size of object changed to zero
+\shape default
+ (116);
+\shape italic
+unreachable code
+\shape default
+ (126);
+\shape italic
+integer overflow in expression
+\shape default
+ (165);
+\shape italic
+unmatched #pragma save and #pragma restore
+\shape default
+ (170);
+\shape italic
+comparison of 'signed char' with 'unsigned char' requires promotion to int
+\shape default
+ (185);
+\shape italic
+ISO C90 does not support flexible array members
+\shape default
+ (187);
+\shape italic
+extended stack by [number] bytes for compiler temp(s) :in function '[function\InsetSpace ~
+nam
+e]':\InsetSpace ~
+[
+\begin_inset Note Note
+status collapsed
+
+\begin_layout Standard
+appears to be always blank - what was supposed to be here?
+\end_layout
+
+\end_inset
+
+]
+\shape default
+ (114);
+\shape italic
+function '[function name]', # edges [number] , # nodes [number] , cyclomatic
+ complexity [number]
+\shape default
+ (121).
+\end_layout
+
+\begin_layout Itemize
+
+\series bold
+disable_warning
+\series default
+ <nnnn>
+\begin_inset LatexCommand \index{\#pragma disable\_warning}
+
+\end_inset
+
+ - the compiler will not warn you anymore about warning number <nnnn>.
+\end_layout
+
+\begin_layout Itemize
+
+\series bold
+nogcse
+\series default
+
+\begin_inset LatexCommand \index{\#pragma nogcse}
+
+\end_inset
+
+ - will stop global common subexpression elimination.
+\end_layout
+
+\begin_layout Itemize
+
+\series bold
+noinduction
+\series default
+
+\begin_inset LatexCommand \index{\#pragma noinduction}
+
+\end_inset
+
+ - will stop loop induction optimizations.
+\end_layout
+
+\begin_layout Itemize
+
+\series bold
+noinvariant
+\series default
+
+\begin_inset LatexCommand \index{\#pragma noinvariant}
+
+\end_inset
+
+ - will not do loop invariant optimizations.
+ For more details see Loop Invariants in section
+\begin_inset LatexCommand \ref{sub:Loop-Optimizations}
+
+\end_inset
+
+.
+\end_layout
+
+\begin_layout Itemize
+
+\series bold
+noiv
+\series default
\begin_inset LatexCommand \index{\#pragma noiv}
\end_inset
-\SpecialChar ~
+\InsetSpace ~
about interrupts.
+\end_layout
-\layout Itemize
+\begin_layout Itemize
\series bold
nojtbound
\end_inset
.
+\end_layout
-\layout Itemize
+\begin_layout Itemize
\series bold
noloopreverse
\end_inset
- Will not do loop reversal optimization
+\end_layout
-\layout Itemize
+\begin_layout Itemize
\series bold
nooverlay
- the compiler will not overlay the parameters and local variables of a
function.
+\end_layout
-\layout Itemize
+\begin_layout Itemize
\series bold
stackauto
- See option -
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
\end_inset
Parameters and Local Variables.
+\end_layout
-\layout Itemize
+\begin_layout Itemize
\series bold
opt_code_speed
- The compiler will optimize code generation towards fast code, possibly
at the expense of code size.
Currently this has little effect.
+\end_layout
-\layout Itemize
+\begin_layout Itemize
\series bold
opt_code_size
- The compiler will optimize code generation towards compact code, possibly
at the expense of code speed.
Currently this has little effect.
+\end_layout
-\layout Itemize
+\begin_layout Itemize
\series bold
opt_code_balanced
as long as meeting one goal is not a detriment to the other (this is the
default).
+\end_layout
-\layout Itemize
+\begin_layout Itemize
\series bold
std_sdcc89
- Generally follow the C89 standard, but allow SDCC features that conflict
with the standard (default).
+\end_layout
-\layout Itemize
+\begin_layout Itemize
\series bold
std_c89
- Follow the C89 standard and disable SDCC features that conflict with the
standard.
+\end_layout
-\layout Itemize
+\begin_layout Itemize
\series bold
std_sdcc99
- Generally follow the C99 standard, but allow SDCC features that conflict
with the standard (incomplete support).
+\end_layout
-\layout Itemize
+\begin_layout Itemize
\series bold
std_c99
- Follow the C99 standard and disable SDCC features that conflict with the
standard (incomplete support).
+\end_layout
-\layout Itemize
+\begin_layout Itemize
\series bold
codeseg
8 characters) for the code segment.
See option -
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
-codeseg.
+\end_layout
-\layout Itemize
+\begin_layout Itemize
\series bold
constseg
8 characters) for the const segment.
See option -
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
-constseg.
+\end_layout
-\layout Standard
+\begin_layout Standard
The preprocessor SDCPP
\begin_inset LatexCommand \index{sdcpp (preprocessor)}
\end_inset
supports the following #pragma directives:
+\end_layout
-\layout Itemize
+\begin_layout Itemize
\series bold
pedantic_parse_number
\series default
+\begin_inset LatexCommand \index{pedantic}
+
+\end_inset
+
+
\begin_inset LatexCommand \index{\#pragma pedantic\_parse\_number}
\end_inset
- (+ | -) - Pedantic parse numbers so that situations like 0xfe-LO_B(3) are
- parsed properly and the macro LO_B(3) gets expanded.
+ (+ | -)
+\begin_inset LatexCommand \label{ite:pedantic_parse_number}
+
+\end_inset
+
+- Pedantic parse numbers so that situations like 0xfe-LO_B(3) are parsed
+ properly and the macro LO_B(3) gets expanded.
Default is off.
- Below is an example on how to use this pragma.
+ See also the -
+\begin_inset ERT
+status collapsed
+
+\begin_layout Standard
+
+
+\backslash
+/
+\end_layout
+
+\end_inset
+
+-pedantic-parse-number command line option
+\begin_inset LatexCommand \vpageref{lyx:-pedantic-parse-number}
+
+\end_inset
+
+.
+
+\newline
+Below is an example on how to use this pragma.
\emph on
Note: this functionality is not in conformance with standard!
+\end_layout
-\layout Verse
+\begin_layout Verse
\family typewriter
#pragma pedantic_parse_number +
\newline
{
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
unsigned char c=0xfe-LO_B(3)
;
\newline
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
return c;
\newline
}
\newline
+\end_layout
-\layout Itemize
+\begin_layout Itemize
\series bold
preproc_asm
This will prevent the preprocessor from changing the formating required
by assembly code.
Below is an example on how to use this pragma.
+\end_layout
-\layout Verse
+\begin_layout Verse
\family typewriter
#pragma preproc_asm -
\newline
#define MYDELAY _asm
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
nop ;my assembly comment...
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
nop
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
nop
\newline
_endasm
\newline
{
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
...
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
MYDELAY;
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
...
\newline
}
\newline
+\end_layout
-\layout Itemize
+\begin_layout Itemize
\series bold
sdcc_hash
\newline
Default is off.
Below is an example on how to use this pragma.
+\end_layout
-\layout Verse
+\begin_layout Verse
\family typewriter
#pragma preproc_asm +
\backslash
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
mov R6_B3, #(x & 0xff)
\backslash
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
mov R7_B3, #((x >> 8) & 0xff)
\backslash
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
lcall __romcall
\newline
...
\newline
+\end_layout
-\layout Standard
-The pragma's are intended to be used to turn-on or off certain optimizations
- which might cause the compiler to generate extra stack / data space to
- store compiler generated temporary variables.
+\begin_layout Standard
+Some of the pragmas are intended to be used to turn-on or off certain optimizati
+ons which might cause the compiler to generate extra stack and/or data space
+ to store compiler generated temporary variables.
This usually happens in large functions.
Pragma directives should be used as shown in the following example, they
- are used to control options & optimizations for a given function; pragmas
- should be placed before and/or after a function, placing pragma's inside
- a function body could have unpredictable results.
+ are used to control options and optimizations for a given function.
+
+\end_layout
-\layout Verse
+\begin_layout Verse
\family typewriter
#pragma save
\end_inset
- \SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+ \InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
/* save the current settings */
\newline
#pragma nogcse
\end_inset
- \SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+ \InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
/* turnoff global subexpression elimination */
\newline
#pragma noinduction
\newline
{
\newline
-\SpecialChar ~
- \SpecialChar ~
+\InsetSpace ~
+ \InsetSpace ~
...
\newline
-\SpecialChar ~
- \SpecialChar ~
+\InsetSpace ~
+ \InsetSpace ~
/* large code */
\newline
-\SpecialChar ~
- \SpecialChar ~
+\InsetSpace ~
+ \InsetSpace ~
...
\newline
\end_inset
/* turn the optimizations back on */
+\end_layout
-\layout Standard
+\begin_layout Standard
The compiler will generate a warning message when extra space is allocated.
- It is strongly recommended that the save and restore pragma's be used when
+ It is strongly recommended that the save and restore pragmas be used when
changing options for a function.
\newline
\newline
+\end_layout
-\layout Section
+\begin_layout Section
Defines Created by the Compiler
+\end_layout
-\layout Standard
+\begin_layout Standard
The compiler creates the following #defines
\begin_inset LatexCommand \index{\#defines}
:
\newline
+\end_layout
-\layout Standard
+\begin_layout Standard
\begin_inset Tabular
<lyxtabular version="3" rows="11" columns="2">
<features>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\series bold
#define
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\series bold
Description
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
SDCC
\begin_inset LatexCommand \index{SDCC}
\end_inset
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
Always defined.
Since version 2.5.6 the version number as an int (ex.
256)
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
SDCC_mcs51
\begin_inset LatexCommand \index{SDCC\_mcs51}
\end_inset
, etc.
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
depending on the model used (e.g.: -mds390)
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
__mcs51
\begin_inset LatexCommand \index{\_\_mcs51}
\end_inset
, etc
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
depending on the model used (e.g.
-mz80)
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
SDCC_STACK_AUTO
\begin_inset LatexCommand \index{SDCC\_STACK\_AUTO}
\end_inset
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
when
\emph on
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
-stack-auto
\emph default
option is used
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
SDCC_MODEL_SMALL
\begin_inset LatexCommand \index{SDCC\_MODEL\_SMALL}
\end_inset
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
when
\emph on
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
-model-small
\emph default
is used
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
SDCC_MODEL_MEDIUM
\begin_inset LatexCommand \index{SDCC\_MODEL\_MEDIUM}
\end_inset
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
when
\emph on
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
-model-medium
\emph default
is used
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
SDCC_MODEL_LARGE
\begin_inset LatexCommand \index{SDCC\_MODEL\_LARGE}
\end_inset
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
when
\emph on
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
-model-large
\emph default
is used
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
SDCC_USE_XSTACK
\begin_inset LatexCommand \index{SDCC\_USE\_XSTACK}
\end_inset
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
when
\emph on
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
-xstack
\emph default
option is used
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
SDCC_STACK_TENBIT
\begin_inset LatexCommand \index{SDCC\_STACK\_TENBIT}
\end_inset
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
when
\emph on
-mds390
\emph default
is used
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
SDCC_MODEL_FLAT24
\begin_inset LatexCommand \index{SDCC\_MODEL\_FLAT24}
\end_inset
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
when
\emph on
-mds390
\emph default
is used
+\end_layout
\end_inset
</cell>
\end_inset
+\end_layout
-\layout Chapter
+\begin_layout Chapter
Notes on supported Processors
+\end_layout
-\layout Section
+\begin_layout Section
MCS51 variants
\begin_inset LatexCommand \label{sub:MCS51-variants}
\end_inset
+\end_layout
-\layout Standard
+\begin_layout Standard
MCS51 processors are available from many vendors and come in many different
flavours.
While they might differ considerably in respect to Special Function Registers
the core MCS51 is usually not modified or is kept compatible.
+\end_layout
-\layout Subsection
+\begin_layout Subsection
pdata access by SFR
+\end_layout
-\layout Standard
+\begin_layout Standard
With the upcome of devices with internal xdata and flash memory devices
using port P2
\begin_inset LatexCommand \index{P2 (mcs51 sfr)}
\family default
at the appropriate location if the default, port P2, is not used for this.
Some examples are:
+\end_layout
+
+\begin_layout Verse
+
+\family typewriter
+__sfr __at (0x85) _XPAGE; /* Ramtron VRS51 family a.k.a.
+ MPAGE */
+\end_layout
+
+\begin_layout Verse
+
+\family typewriter
+__sfr __at (0x92) _XPAGE; /* Cypress EZ-USB family, Texas Instruments (Chipcon)
+ a.k.a.
+ MPAGE */
+\end_layout
-\layout Verse
+\begin_layout Verse
\family typewriter
-__sfr __at (0x92) _XPAGE; /* Cypress EZ-USB family */
+__sfr __at (0x91) _XPAGE; /* Infineon (Siemens) C500 family a.k.a.
+ XPAGE */
+\end_layout
-\layout Verse
+\begin_layout Verse
\family typewriter
-__sfr __at (0xaf) _XPAGE; /* some Silicon Labs (Cygnal) chips */
+__sfr __at (0xaf) _XPAGE; /* some Silicon Labs (Cygnal) chips a.k.a.
+ EMI0CN */
+\end_layout
-\layout Verse
+\begin_layout Verse
\family typewriter
-__sfr __at (0xaa) _XPAGE; /* some Silicon Labs (Cygnal) chips */
+__sfr __at (0xaa) _XPAGE; /* some Silicon Labs (Cygnal) chips a.k.a.
+ EMI0CN */
+\end_layout
-\layout Standard
+\begin_layout Standard
For more exotic implementations further customizations may be needed.
See section
\begin_inset LatexCommand \ref{sub:Startup-Code}
\end_inset
for other possibilities.
+\end_layout
-\layout Subsection
+\begin_layout Subsection
Other Features available by SFR
+\end_layout
-\layout Standard
-\added_space_bottom bigskip
+\begin_layout Standard
Some MCS51 variants offer features like Double DPTR
\begin_inset LatexCommand \index{DPTR}
These are currently not used for the MCS51 port.
If you absolutely need them you can fall back to inline assembly or submit
a patch to SDCC.
+\begin_inset VSpace bigskip
+\end_inset
+\end_layout
-\layout Section
+\begin_layout Section
DS400 port
+\end_layout
-\layout Standard
-\added_space_bottom bigskip
+\begin_layout Standard
The DS80C400
\begin_inset LatexCommand \index{DS80C400}
.
+\begin_inset VSpace bigskip
+\end_inset
+\end_layout
-\layout Section
+\begin_layout Section
The Z80 and gbz80 port
+\end_layout
-\layout Standard
+\begin_layout Standard
SDCC can target both the Zilog Z80
\begin_inset LatexCommand \index{Z80}
) as the MCS51 and DS390 ports, so floating point support, support for long
variables and bitfield support is fine.
See mailing lists and forums about interrupt routines.
+\end_layout
-\layout Standard
-\added_space_bottom bigskip
+\begin_layout Standard
As always, the code is the authoritative reference - see z80/ralloc.c and
z80/gen.c.
The stack
The gbz80 port use the same set of registers for the return values, but
in a different order of significance: E (one byte), DE (two bytes), or
HLDE (four bytes).
+\begin_inset VSpace bigskip
+\end_inset
+\end_layout
-\layout Section
+\begin_layout Section
The HC08 port
+\end_layout
-\layout Standard
+\begin_layout Standard
The port to the Freescale/Motorola HC08
\begin_inset LatexCommand \index{HC08}
unoptimized.
Some of the SDCC's standard C library functions have embedded non-HC08
inline assembly and so are not yet usable.
+\end_layout
-\layout Standard
-\added_space_bottom bigskip
-\pagebreak_bottom
+\begin_layout Standard
The HC08 port passes the regression test suite (see section
\begin_inset LatexCommand \ref{sec:Quality-control}
\end_inset
).
+\begin_inset VSpace bigskip
+\end_inset
+\newpage
+\end_layout
-\layout Section
-The PIC14 port
+\begin_layout Section
+The PIC14
+\begin_inset LatexCommand \index{PIC14}
+
+\end_inset
+
+ port
+\end_layout
+
+\begin_layout Standard
+The PIC14 port adds support for Microchip
+\begin_inset LatexCommand \index{Microchip}
+
+\end_inset
+
+
+\begin_inset Formula $^{\text{TM}}$
+\end_inset
-\layout Standard
-The 14bit PIC
+ PIC
\begin_inset LatexCommand \index{PIC14}
\end_inset
- port still requires a major effort from the development community.
- However it can work for simple code.
- It passes its (smaller set of) regression tests
-\begin_inset LatexCommand \index{Regression test (PIC14)}
+\begin_inset Formula $^{\text{TM}}$
\end_inset
- in the directory
-\shape italic
-sdcc/src/regression
-\shape default
-.
+ MCUs with 14 bit wide instructions.
+ This port is not yet mature and still lacks many features.
+ However, it can work for simple code.
+\end_layout
+
+\begin_layout Standard
+Currently supported devices include:
+\end_layout
+
+\begin_layout Standard
+12F: 629, 635, 675, 683
+\end_layout
+
+\begin_layout Standard
+16C: 432, 433
+\end_layout
+
+\begin_layout Standard
+16C: 554, 557, 558
+\end_layout
+
+\begin_layout Standard
+16C: 62, 620, 620a, 621, 621a, 622, 622a, 63a, 65b
+\end_layout
+
+\begin_layout Standard
+16C: 71, 710, 711, 715, 717, 72, 73b, 745, 74b, 765, 770, 771, 773, 774,
+ 781, 782
+\end_layout
+
+\begin_layout Standard
+16C: 925, 926
+\end_layout
+
+\begin_layout Standard
+16F: 627, 627a, 628, 628a, 630, 636, 639, 648a, 676, 684, 685, 687, 688,
+ 689, 690
+\end_layout
+
+\begin_layout Standard
+16F: 716, 72, 73, 737, 74, 76, 767, 77, 777, 785
+\end_layout
+
+\begin_layout Standard
+16F: 818, 819, 84, 84a, 87, 870, 871, 872, 873, 873a, 874, 874a, 876, 876a,
+ 877, 877a, 88
+\end_layout
+
+\begin_layout Standard
+16F: 913, 914, 916, 917
+\end_layout
+
+\begin_layout Standard
+An up-to-date list of currently supported devices can be obtained via
+\family typewriter
+sdcc -mpic14 -phelp foo.c
+\family default
+ (foo.c must exist...).
+\end_layout
-\layout Subsection
-C code and 14bit PIC code page
+\begin_layout Subsection
+PIC Code Pages
\begin_inset LatexCommand \index{code page (pic14)}
\end_inset
- and RAM banks
-\begin_inset LatexCommand \index{RAM bank (pic14)}
+ and Memory Banks
+\begin_inset LatexCommand \index{Memory bank (pic14)}
\end_inset
+\end_layout
-\layout Standard
+\begin_layout Standard
The linker organizes allocation for the code page and RAM banks.
It does not have intimate knowledge of the code flow.
- It will put all the code section of a single asm file into a single code
+ It will put all the code section of a single .asm file into a single code
page.
In order to make use of multiple code pages, separate asm files must be
used.
- The compiler treats all functions of a single C file as being in the same
- code page unless it is non static.
+ The compiler assigns all
+\emph on
+static
+\emph default
+ functions of a single .c file into the same code page.
\newline
\newline
-To get the best follow these guide lines:
+To get the best results,
+ follow these guidelines:
+\end_layout
-\layout Enumerate
+\begin_layout Enumerate
Make local functions static, as non static functions require code page selection
overhead.
+\newline
+Due to the way sdcc handles functions, place called functions prior
+ to calling functions in the file wherever possible: Otherwise sdcc will
+ insert unneccessary pagesel directives around the call, believing that
+ the called function is externally defined.
+\end_layout
-\layout Enumerate
+\begin_layout Enumerate
For devices that have multiple code pages it is more efficient to use the
- same number of files as pages, i.e.
- for the 16F877 use 4 separate files and i.e.
- for the 16F874 use 2 separate files.
+ same number of files as pages: Use up to 4 separate .c files for the 16F877,
+ but only 2 files for the 16F874.
This way the linker can put the code for each file into different code
- pages and there's less page selection overhead.
+ pages and there will be less page selection overhead.
+\end_layout
+
+\begin_layout Enumerate
+And as for any 8 bit micro (especially for PIC14 as they have a very simple
+ instruction set), use `unsigned char' wherever possible instead of `int'.
+\end_layout
+
+\begin_layout Subsection
+Adding New Devices to the Port
+\end_layout
+
+\begin_layout Standard
+Adding support for a new 14
+\begin_inset ERT
+status open
-\layout Enumerate
- And as for any 8 bit micro (especially for PIC 14 as they have a very simple
- instruction set), use 'unsigned char' whereever possible instead of 'int'.
+\begin_layout Standard
-\layout Subsection
-Creating a device include file
-\layout Standard
-For generating a device include file
-\begin_inset LatexCommand \index{PIC14!Header files}
+\backslash
+,
+\end_layout
\end_inset
- use the support perl script inc2h.pl kept in directory support/script.
+bit PIC MCU requires the following steps:
+\end_layout
+
+\begin_layout Enumerate
+Create a new device description.
+\newline
+Each device is described in two files: pic16f*.h
+ and pic16f*.c.
+ These files primarily define SFRs, structs to access their bits, and symbolic
+ configuration options.
+ Both files can be generated from gputils' .inc files using the perl script
+
+\family typewriter
+support/scripts/inc2h.pl
+\family default
+.
+ This file also contains further instructions on how to proceed.
+\end_layout
+
+\begin_layout Enumerate
+Copy the .h file into SDCC's include path and either add the .c file to your
+ project or copy it to
+\family typewriter
+device/lib/pic/libdev
+\family default
+.
+ Afterwards, rebuild and install the libraries.
+\end_layout
+
+\begin_layout Enumerate
+Edit pic14devices.txt in SDCC's include path (
+\family typewriter
+device/include/pic/
+\family default
+ in the source tree or
+\family typewriter
+/usr/local/share/sdcc/include/pic
+\family default
+ after installation).
+\newline
+You need to add a device specification here to make
+ the memory layout (code banks, RAM, aliased memory regions, ...) known to
+ the compiler.
+ Probably you can copy and modify an existing entry.
+ The file format is documented at the top of the file.
+\end_layout
-\layout Subsection
-Interrupt code
+\begin_layout Subsection
+Interrupt Code
+\end_layout
-\layout Standard
-For the interrupt function, use the keyword '__interrupt'
+\begin_layout Standard
+For the interrupt function, use the keyword `__interrupt'
\begin_inset LatexCommand \index{PIC14!interrupt}
\end_inset
with level number of 0 (PIC14 only has 1 interrupt so this number is only
there to avoid a syntax error - it ought to be fixed).
E.g.:
+\end_layout
-\layout Verse
+\begin_layout Verse
\family typewriter
void Intr(void) __interrupt 0
\newline
{
\newline
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
T0IF = 0; /* Clear timer interrupt */
\newline
}
+\end_layout
-\layout Subsection
-Linking and assembling
+\begin_layout Subsection
+Linking and Assembling
+\end_layout
-\layout Standard
+\begin_layout Standard
For assembling you can use either GPUTILS'
\begin_inset LatexCommand \index{gputils (pic tools)}
\end_inset
gpasm.exe or MPLAB's mpasmwin.exe.
- GPUTILS is available from
+ GPUTILS are available from
\begin_inset LatexCommand \url{http://sourceforge.net/projects/gputils}
\end_inset
.
- For linking you can use either GPUTIL's gplink or MPLAB's mplink.exe.
+ For linking you can use either GPUTILS' gplink or MPLAB's mplink.exe.
If you use MPLAB and an interrupt function then the linker script file
vectors section will need to be enlarged to link with mplink.
\newline
Makefile
\family default
using GPUTILS:
+\end_layout
-\layout Verse
+\begin_layout Verse
\family typewriter
.c.o:
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-sdcc -S -V -mpic14 -p16F877 $<
-\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-gpasm -c $*.asm
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+sdcc -V -mpic14 -p16f877 -c $<
\newline
\newline
$(PRJ).hex: $(OBJS)
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-gplink
- -m -s $(PRJ).lkr -o $(PRJ).hex $(OBJS) libsdcc.lib
-
-\layout Standard
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+gplink -m -s $(PRJ).lkr
+ -o $(PRJ).hex $(OBJS) libsdcc.lib
+\end_layout
+
+\begin_layout Standard
Here is a
\family typewriter
Makefile
\family default
using MPLAB:
+\end_layout
-\layout Verse
+\begin_layout Verse
\family typewriter
.c.o:
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-sdcc -S -V -mpic14 -p16F877 $<
-\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+sdcc -S -V -mpic14 -p16f877 $<
+\newline
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
mpasmwin /q /o $*.asm
\newline
$(PRJ).hex: $(OBJS)
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
mplink /v $(PRJ).lkr /m $(PRJ).map /o $(PRJ).hex $(OBJS) libsdcc.lib
+\end_layout
-\layout Standard
+\begin_layout Standard
Please note that indentations within a
\family typewriter
Makefile
\family default
have to be done with a tabulator character.
+\end_layout
-\layout Subsection
-Command-line options
+\begin_layout Subsection
+Command-Line Options
+\end_layout
-\layout Standard
+\begin_layout Standard
Besides the switches common to all SDCC backends, the PIC14 port accepts
the following options (for an updated list see sdcc -
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
-help):
+\end_layout
-\layout List
-\labelwidthstring 00.00.0000
+\begin_layout Description
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
--debug-extra
+-debug-xtra
\begin_inset LatexCommand \index{PIC14!Options!-\/-debug-extra}
\end_inset
emit debug info in assembly output
+\end_layout
-\layout List
-\labelwidthstring 00.00.0000
+\begin_layout Description
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
\end_inset
disable (slightly faulty) optimization on pCode
+\end_layout
-\layout List
-\labelwidthstring 00.00.0000
+\begin_layout Description
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
sets the lowest address of the argument passing stack (defaults to a suitably
large shared databank to reduce BANKSEL overhead)
+\end_layout
-\layout List
-\labelwidthstring 00.00.0000
+\begin_layout Description
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
\end_inset
sets the size if the argument passing stack (default: 16, minimum: 4)
+\end_layout
+
+\begin_layout Subsection
+Environment Variables
+\end_layout
+
+\begin_layout Standard
+The PIC14 port recognizes the following environment variables:
+\end_layout
+
+\begin_layout Description
+SDCC_PIC14_SPLIT_LOCALS If set and not empty, sdcc will allocate each temporary
+ register (the ones called r0xNNNN) in a section of its own.
+ By default (if this variable is unset), sdcc tries to cluster registers
+ in sections in order to reduce the BANKSEL overhead when accessing them.
+\end_layout
+
+\begin_layout Subsection
+The Library
+\end_layout
+
+\begin_layout Standard
+The PIC14 library currently only contains support routines required by the
+ compiler to implement multiplication, division, and floating point support.
+ No libc-like replacement is available at the moment, though many of the
+ common sdcc library sources (in
+\family typewriter
+device/lib
+\family default
+) should also compile with the PIC14 port.
+\end_layout
-\layout Subsection
-The library
-
-\layout Subsubsection
-error: missing definition for symbol
-\begin_inset Quotes sld
-\end_inset
-
-__gptrget1
-\begin_inset Quotes srd
-\end_inset
-
-
+\begin_layout Subsubsection
+error: missing definition for symbol ``__gptrget1''
+\end_layout
-\layout Standard
+\begin_layout Standard
The PIC14 port uses library routines to provide more complex operations
like multiplication, division/modulus and (generic) pointer dereferencing.
In order to add these routines to your project, you must link with PIC14's
to the linker's arguments.
Make sure you also add an include path for the library (using the -I switch
to the linker)!
+\end_layout
-\layout Subsubsection
-Processor mismatch in file
-\begin_inset Quotes sld
-\end_inset
+\begin_layout Subsubsection
+Processor mismatch in file ``XXX''.
+\end_layout
-XXX
-\begin_inset Quotes srd
-\end_inset
+\begin_layout Standard
+This warning can usually be ignored due to the very good compatibility amongst
+ 14
+\begin_inset ERT
+status open
-.
+\begin_layout Standard
-\layout Standard
-This warning can usually be ignored due to the very good compatibility amongst
- 14 bit PIC
+
+\backslash
+,
+\end_layout
+
+\end_inset
+
+bit PIC
\begin_inset LatexCommand \index{PIC14}
\end_inset
devices.
+\end_layout
-\layout Standard
+\begin_layout Standard
You might also consider recompiling the library for your specific device
by changing the ARCH=p16f877 (default target) entry in
\family typewriter
\family default
to reflect your device.
This might even improve performance for smaller devices as unneccesary
- BANKSELs migth be removed.
+ BANKSELs might be removed.
+\end_layout
-\layout Subsection
-Known bugs
+\begin_layout Subsection
+Known Bugs
+\end_layout
-\layout Subsubsection
-initialized data
-
-\layout Standard
-Currently, data can only be initialized if it resides in the source file
-\pagebreak_bottom
- together with
-\emph on
-main()
-\emph default
-.
- Data in other source files will silently
-\series bold
-not
-\series default
- be initialized.
-\family typewriter
-\size footnotesize
+\begin_layout Subsubsection
+Function arguments
+\end_layout
-\begin_inset Marginal
-collapsed true
+\begin_layout Standard
+Functions with variable argument lists (like printf) are not yet supported.
+ Similarly, taking the argument of the first argument passed into a function
+ does not work: It is currently passed in WREG and has no address...
+\end_layout
-\layout Standard
+\begin_layout Subsubsection
+Regression tests fail
+\end_layout
-\series bold
-\SpecialChar ~
-!
+\begin_layout Standard
+Though the small subset of regression tests in src/regression passes, SDCC
+ regression test suite does not, indicating that there are still major bugs
+ in the port.
+ However, many smaller projects have successfully used SDCC in the past...
+\end_layout
-\end_inset
+\begin_layout Standard
+\size footnotesize
+\newpage
+\end_layout
-\layout Section
+\begin_layout Section
The PIC16
\begin_inset LatexCommand \index{PIC16}
\end_inset
port
+\end_layout
-\layout Standard
-The PIC16
-\begin_inset LatexCommand \index{PIC16}
+\begin_layout Standard
+The PIC16 port adds support for Microchip
+\begin_inset LatexCommand \index{Microchip}
\end_inset
- port is the portion of SDCC that is responsible to produce code for the
- Microchip
-\begin_inset LatexCommand \index{Microchip}
+\begin_inset Formula $^{\text{TM}}$
\end_inset
-(TM) microcontrollers with 16 bit core.
- Currently this family of microcontrollers contains the PIC18Fxxx and PIC18Fxxxx.
- Currently supported devices are:
+ PIC
+\begin_inset LatexCommand \index{PIC}
-\layout Standard
-\align center
-\begin_inset Tabular
-<lyxtabular version="3" rows="4" columns="6">
-<features>
-<column alignment="center" valignment="top" leftline="true" width="0">
-<column alignment="center" valignment="top" leftline="true" width="0">
-<column alignment="center" valignment="top" leftline="true" width="0">
-<column alignment="center" valignment="top" leftline="true" width="0">
-<column alignment="center" valignment="top" leftline="true" width="0">
-<column alignment="center" valignment="top" leftline="true" rightline="true" width="0">
-<row topline="true">
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
-\begin_inset Text
+\end_inset
-\layout Standard
-18F242
+\begin_inset Formula $^{\text{TM}}$
\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
-\begin_inset Text
-\layout Standard
-18F248
+ MCUs with 16 bit wide instructions.
+ Currently this family of microcontrollers contains the PIC18Fxxx and PIC18Fxxxx
+; devices supported by the port include:
+\end_layout
-\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
-\begin_inset Text
+\begin_layout Standard
+18F: 242, 248, 252, 258, 442, 448, 452, 458
+\end_layout
-\layout Standard
-18F252
+\begin_layout Standard
+18F: 1220, 1320
+\end_layout
-\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
-\begin_inset Text
+\begin_layout Standard
+18F: 2220, 2221, 2320, 2321, 2331, 2431, 2455, 24j10, 2525, 2550, 25j10,
+ 2620
+\end_layout
-\layout Standard
-18F258
+\begin_layout Standard
+18F: 4220, 4221, 4320, 4321, 4331, 4431, 4455, 44j10, 4520, 4525, 4550,
+ 45j10, 4620
+\end_layout
-\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
-\begin_inset Text
+\begin_layout Standard
+18F: 6520, 6620, 6680, 6720
+\end_layout
-\layout Standard
-18F442
+\begin_layout Standard
+18F: 8520, 8620, 8680, 8720
+\end_layout
-\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
-\begin_inset Text
+\begin_layout Subsection
+Global Options
+\end_layout
-\layout Standard
-18F448
+\begin_layout Standard
+PIC16 port supports the standard command line arguments as supposed, with
+ the exception of certain cases that will be mentioned in the following
+ list:
+\end_layout
-\end_inset
-</cell>
-</row>
-<row topline="true">
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
-\begin_inset Text
-
-\layout Standard
-18F452
-
-\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
-\begin_inset Text
-
-\layout Standard
-18F458
-
-\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
-\begin_inset Text
-
-\layout Standard
-18F1220
-
-\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
-\begin_inset Text
-
-\layout Standard
-18F2220
-
-\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
-\begin_inset Text
-
-\layout Standard
-18F2550
-
-\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
-\begin_inset Text
+\begin_layout Description
+-
+\begin_inset ERT
+status collapsed
-\layout Standard
-18F4331
+\begin_layout Standard
-\end_inset
-</cell>
-</row>
-<row topline="true">
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
-\begin_inset Text
-\layout Standard
-18F4455
+\backslash
+/
+\end_layout
\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
-\begin_inset Text
-\layout Standard
-18F6520
+-callee-saves
+\begin_inset LatexCommand \index{PIC16!Options!-\/-callee-saves}
\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
-\begin_inset Text
-
-\layout Standard
-18F6620
-\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
-\begin_inset Text
+ See -
+\begin_inset ERT
+status collapsed
-\layout Standard
-18F6680
+\begin_layout Standard
-\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
-\begin_inset Text
-\layout Standard
-18F6720
+\backslash
+/
+\end_layout
\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
-\begin_inset Text
-\layout Standard
-18F8520
+-all-callee-saves
+\end_layout
-\end_inset
-</cell>
-</row>
-<row topline="true" bottomline="true">
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
-\begin_inset Text
+\begin_layout Description
+-
+\begin_inset ERT
+status collapsed
-\layout Standard
-18F8620
+\begin_layout Standard
-\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
-\begin_inset Text
-\layout Standard
-18F8680
+\backslash
+/
+\end_layout
\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
-\begin_inset Text
-\layout Standard
-18F8720
+-fommit-frame-pointer
+\begin_inset LatexCommand \index{PIC16!Options!-\/-fommit-frame-pointer}
\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
-\begin_inset Text
-\layout Standard
+ Frame pointer will be omitted when the function uses no local variables.
+\end_layout
+\begin_layout Subsection
+Port Specific Options
+\begin_inset LatexCommand \index{Options PIC16}
\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
-\begin_inset Text
-\layout Standard
+\end_layout
-\end_inset
-</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
-\begin_inset Text
+\begin_layout Standard
+The port specific options appear after the global options in the sdcc -
+\begin_inset ERT
+status collapsed
-\layout Standard
+\begin_layout Standard
-\end_inset
-</cell>
-</row>
-</lyxtabular>
+\backslash
+/
+\end_layout
\end_inset
+-help output.
+\end_layout
+\begin_layout Subsubsection
+Code Generation Options
+\end_layout
-\layout Subsection
-Global Options
+\begin_layout Standard
+These options influence the generated assembler code.
+\end_layout
-\layout Standard
-PIC16 port supports the standard command line arguments as supposed, with
- the exception of certain cases that will be mentioned in the following
- list:
-
-\layout List
-\labelwidthstring 00.00.0000
+\begin_layout Description
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
--callee-saves
-\begin_inset LatexCommand \index{PIC16!Options!-\/-callee-saves}
-
-\end_inset
-
- See -
-\begin_inset ERT
-status Collapsed
-
-\layout Standard
+-pstack-model=[model] Used in conjuction with the command above.
+ Defines the stack model to be used, valid stack models are:
+\end_layout
+\begin_deeper
+\begin_layout List
+\labelwidthstring 00.00.0000
-\backslash
-/
+\emph on
+small
+\emph default
+ Selects small stack model.
+ 8 bit stack and frame pointers.
+ Supports 256 bytes stack size.
+\end_layout
-\end_inset
+\begin_layout List
+\labelwidthstring 00.00.0000
--all-callee-saves
+\emph on
+large
+\emph default
+ Selects large stack model.
+ 16 bit stack and frame pointers.
+ Supports 65536 bytes stack size.
+\end_layout
-\layout List
-\labelwidthstring 00.00.0000
+\end_deeper
+\begin_layout Description
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
--all-callee-saves
-\begin_inset LatexCommand \index{PIC16!Options!-\/-all-callee-saves}
-
-\end_inset
+-pno-banksel Do not generate BANKSEL assembler directives.
+\end_layout
- All function arguments are passed on stack by default.
-
-\emph on
-There is no need to specify this in the command line.
-
-\layout List
-\labelwidthstring 00.00.0000
+\begin_layout Description
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
--fommit-frame-pointer
-\begin_inset LatexCommand \index{PIC16!Options!-\/-fommit-frame-pointer}
-
-\end_inset
-
- Frame pointer will be omitted when the function uses no local variables.
-
-\layout Subsection
-Port Specific Options
-\begin_inset LatexCommand \index{Options PIC16}
-
-\end_inset
-
+-extended Enable extended instruction set/literal offset addressing mode.
+ Use with care!
+\end_layout
+\begin_layout Subsubsection
+Optimization Options
+\end_layout
-\layout Standard
-The port specific options appear after the global options in the sdcc --help
- output.
-
-\layout Subsubsection
-General Options
-
-\layout Standard
-General options enable certain port features and optimizations.
-
-\layout List
-\labelwidthstring 00.00.0000
+\begin_layout Description
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
--pstack-model=[model] Used in conjuction with the command above.
- Defines the stack model to be used, valid stack models are :
+-obanksel=n Set optimization level for inserting BANKSELs.
+\newline
+
+\end_layout
\begin_deeper
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
+0 no optimization
+\end_layout
-\emph on
-small
-\emph default
- Selects small stack model.
- 8 bit stack and frame pointers.
- Supports 256 bytes stack size.
+\begin_layout List
+\labelwidthstring 00.00.0000
+1 checks previous used register and if it is the same then does not emit
+ BANKSEL, accounts only for labels.
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
+2 tries to check the location of (even different) symbols and removes BANKSELs
+ if they are in the same bank.
+
+\newline
\emph on
-large
-\emph default
- Selects large stack model.
- 16 bit stack and frame pointers.
- Supports 65536 bytes stack size.
+Important: There might be problems if the linker script has data sections
+ across bank borders!
+\end_layout
\end_deeper
-\layout List
-\labelwidthstring 00.00.0000
+\begin_layout Description
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
--preplace-udata-with=[kword] Replaces the default udata keyword for allocating
- unitialized data variables with [kword].
- Valid keywords are: "udata_acs", "udata_shr", "udata_ovr".
+-denable-peeps Force the usage of peepholes.
+ Use with care.
+\end_layout
-\layout List
-\labelwidthstring 00.00.0000
+\begin_layout Description
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
--ivt-loc <nnnn> positions the Interrupt Vector Table at location <nnnn>.
- Useful for bootloaders.
+-optimize-goto Try to use (conditional) BRA instead of GOTO.
+\end_layout
-\layout List
-\labelwidthstring 00.00.0000
+\begin_layout Description
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
--asm= sets the full path and name of an external assembler to call.
+-optimize-cmp Try to optimize some compares.
+\end_layout
-\layout List
-\labelwidthstring 00.00.0000
+\begin_layout Description
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
--link= sets the full path and name of an external linker to call.
+-optimize-df Analyze the dataflow of the generated code and improve it.
+\end_layout
-\layout List
-\labelwidthstring 00.00.0000
+\begin_layout Subsubsection
+Assembling Options
+\end_layout
+
+\begin_layout Description
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
--mplab-comp MPLAB
-\begin_inset LatexCommand \index{PIC16!MPLAB}
-
-\end_inset
-
- compatibility option.
- Currently only suppresses special gpasm directives.
-
-\layout Subsubsection
-Optimization Options
+-asm= Sets the full path and name of an external assembler to call.
+\end_layout
-\layout List
-\labelwidthstring 00.00.0000
+\begin_layout Description
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
--optimize-goto Try to use (conditional) BRA instead of GOTO
+-mplab-comp MPLAB
+\begin_inset LatexCommand \index{PIC16!MPLAB}
-\layout List
-\labelwidthstring 00.00.0000
+\end_inset
+
+ compatibility option.
+ Currently only suppresses special gpasm directives.
+\end_layout
+
+\begin_layout Subsubsection
+Linking Options
+\end_layout
+
+\begin_layout Description
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
--optimize-cmp Try to optimize some compares.
+-link= Sets the full path and name of an external linker to call.
+\end_layout
-\layout List
-\labelwidthstring 00.00.0000
+\begin_layout Description
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
--optimize-df Analyze the dataflow of the generated code and improve it.
+-preplace-udata-with=[kword] Replaces the default udata keyword for allocating
+ unitialized data variables with [kword].
+ Valid keywords are: "udata_acs", "udata_shr", "udata_ovr".
+\end_layout
-\layout List
-\labelwidthstring 00.00.0000
+\begin_layout Description
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
--obanksel=nn Set optimization level for inserting BANKSELs.
-\newline
-
-
-\begin_deeper
-\layout List
-\labelwidthstring 00.00.0000
-0 no optimization
-
-\layout List
-\labelwidthstring 00.00.0000
-1 checks previous used register and if it is the same then does not emit
- BANKSEL, accounts only for labels.
-
-\layout List
-\labelwidthstring 00.00.0000
-2 tries to check the location of (even different) symbols and removes BANKSELs
- if they are in the same bank.
-
-\newline
-
+-ivt-loc=n Place the interrupt vector table at address
\emph on
-Important: There might be problems if the linker script has data sections
- across bank borders!
-
-\end_deeper
-\layout Subsubsection
-Linking Options
+n
+\emph default
+.
+ Useful for bootloaders.
+\end_layout
-\layout List
-\labelwidthstring 00.00.0000
+\begin_layout Description
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
--nodefaultlibs do not link default libraries when linking
+-nodefaultlibs Do not link default libraries when linking.
+\end_layout
-\layout List
-\labelwidthstring 00.00.0000
+\begin_layout Description
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
--no-crt Don't link the default run-time modules
+-use-crt= Use a custom run-time module instead of the defaults.
+\end_layout
-\layout List
-\labelwidthstring 00.00.0000
+\begin_layout Description
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
--use-crt= Use a custom run-time module instead of the defaults.
+-no-crt Don't link the default run-time modules
+\end_layout
-\layout Subsubsection
+\begin_layout Subsubsection
Debugging Options
+\end_layout
-\layout Standard
+\begin_layout Standard
Debugging options enable extra debugging information in the output files.
+\end_layout
-\layout List
-\labelwidthstring 00.00.0000
+\begin_layout Description
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
-debug-xtra Similar to -
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
\end_inset
-, but dumps more information.
-
-\layout List
-\labelwidthstring 00.00.0000
--
-\begin_inset ERT
-status Collapsed
-
-\layout Standard
-
-
-\backslash
-/
-
-\end_inset
-
--debug-ralloc Force register allocator to dump <source>.d file with debugging
- information.
- <source> is the name of the file compiled.
-
-\layout List
-\labelwidthstring 00.00.0000
+, but dumps more information.
+\end_layout
+
+\begin_layout Description
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
--pcode-verbose Enable pcode debugging information in translation.
+-debug-ralloc Force register allocator to dump <source>.d file with debugging
+ information.
+ <source> is the name of the file being compiled.
+\end_layout
-\layout List
-\labelwidthstring 00.00.0000
+\begin_layout Description
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
--denable-peeps Force the usage of peepholes.
- Use with care.
+-pcode-verbose Enable pcode debugging information in translation.
+\end_layout
-\layout List
-\labelwidthstring 00.00.0000
+\begin_layout Description
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
--gstack Trace push/pops for stack pointer overflow
+-calltree Dump call tree in .calltree file.
+\end_layout
-\layout List
-\labelwidthstring 00.00.0000
+\begin_layout Description
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
--call-tree dump call tree in .calltree file
+-gstack Trace push/pops for stack pointer overflow.
+\end_layout
-\layout Subsection
-Enviromental Variables
+\begin_layout Subsection
+Enviroment Variables
+\end_layout
-\layout Standard
+\begin_layout Standard
There is a number of enviromental variables that can be used when running
SDCC to enable certain optimizations or force a specific program behaviour.
these variables are primarily for debugging purposes so they can be enabled/dis
abled at will.
+\end_layout
-\layout Standard
+\begin_layout Standard
Currently there is only two such variables available:
+\end_layout
-\layout List
-\labelwidthstring 00.00.0000
-OPTIMIZE_BITFIELD_POINTER_GET when this variable exists reading of structure
+\begin_layout Description
+OPTIMIZE_BITFIELD_POINTER_GET When this variable exists, reading of structure
bitfields is optimized by directly loading FSR0 with the address of the
bitfield structure.
Normally SDCC will cast the bitfield structure to a bitfield pointer and
then load FSR0.
- This step saves data ram and code space for functions that perform heavy
- use of bitfields.
- (ie.
- 80 bytes of code space are saved when compiling malloc.c with this option).
+ This step saves data ram and code space for functions that make heavy use
+ of bitfields.
+ (i.e., 80 bytes of code space are saved when compiling malloc.c with this
+ option).
+\end_layout
-\layout List
-\labelwidthstring 00.00.0000
-NO_REG_OPT do not perform pCode registers optimization.
+\begin_layout Description
+NO_REG_OPT Do not perform pCode registers optimization.
This should be used for debugging purposes.
- In some where bugs in the pcode optimizer are found, users can benefit
- from temporarily disabling the optimizer until the bug is fixed.
+ If bugs in the pcode optimizer are found, users can benefit from temporarily
+ disabling the optimizer until the bug is fixed.
+\end_layout
-\layout Subsection
+\begin_layout Subsection
Preprocessor Macros
+\end_layout
-\layout Standard
+\begin_layout Standard
PIC16
\begin_inset LatexCommand \index{PIC16}
\end_inset
port defines the following preprocessor macros while translating a source.
+\end_layout
-\layout Standard
+\begin_layout Standard
\align center
\begin_inset Tabular
<lyxtabular version="3" rows="6" columns="2">
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
Macro
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
Description
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
SDCC_pic16
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
Port identification
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
_
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
_pic16
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
Port identification (same as above)
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
pic18fxxxx
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
MCU Identification.
\emph on
\emph default
is the microcontrol identification number, i.e.
452, 6620, etc
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
_
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
_18Fxxxx
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
MCU Identification (same as above)
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
STACK_MODEL_nnn
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
nnn = SMALL or LARGE respectively according to the stack model used
+\end_layout
\end_inset
</cell>
\end_inset
+\end_layout
-\layout Standard
+\begin_layout Standard
In addition the following macros are defined when calling assembler:
+\end_layout
-\layout Standard
+\begin_layout Standard
\align center
\begin_inset Tabular
<lyxtabular version="3" rows="4" columns="2">
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
Macro
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
Description
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
__18Fxxxx
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
MCU Identification.
\emph on
\emph default
is the microcontrol identification number, i.e.
452, 6620, etc
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
SDCC_MODEL_nnn
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
nnn = SMALL or LARGE respectively according to the memory model used for
SDCC
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
STACK_MODEL_nnn
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
nnn = SMALL or LARGE respectively according to the stack model used
+\end_layout
\end_inset
</cell>
\end_inset
+\end_layout
-\layout Subsection
+\begin_layout Subsection
Directories
+\end_layout
-\layout Standard
+\begin_layout Standard
PIC16
\begin_inset LatexCommand \index{PIC16}
\end_inset
port uses the following directories for searching header files and libraries.
+\end_layout
-\layout Standard
+\begin_layout Standard
\align center
\begin_inset Tabular
<lyxtabular version="3" rows="3" columns="4">
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
Directory
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
Description
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
Target
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
Command prefix
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
PREFIX/sdcc/include/pic16
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
PIC16 specific headers
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
Compiler
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
-I
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
PREFIX/sdcc/lib/pic16
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
PIC16 specific libraries
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
Linker
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
-L
+\end_layout
\end_inset
</cell>
\end_inset
+\end_layout
-\layout Subsection
+\begin_layout Subsection
Pragmas
\begin_inset LatexCommand \label{sub:PIC16_Pragmas}
\end_inset
+\end_layout
-\layout Standard
-PIC16
+\begin_layout Standard
+The PIC16
\begin_inset LatexCommand \index{PIC16}
\end_inset
port currently supports the following pragmas:
+\end_layout
-\layout List
-\labelwidthstring 00.00.0000
+\begin_layout Description
stack
\begin_inset LatexCommand \index{PIC16!Pragmas!\#pragma stack}
\end_inset
- pragma stack
-\begin_inset LatexCommand \index{PIC16!stack}
-
-\end_inset
-
- forces the code generator to initialize the stack & frame pointers at a
- specific address.
- This is an adhoc solution for cases where no STACK directive is available
+ This forces the code generator to initialize the stack & frame pointers
+ at a specific address.
+ This is an ad hoc solution for cases where no STACK directive is available
in the linker script or gplink is not instructed to create a stack section.
\newline
The
stack pragma should be used only once in a project.
Multiple pragmas may result in indeterminate behaviour of the program.
\begin_inset Foot
-collapsed false
+status open
-\layout Standard
+\begin_layout Standard
The old format (ie.
#pragma stack 0x5ff) is deprecated and will cause the stack pointer to
cross page boundaries (or even exceed the available data RAM) and crash
the program.
Make sure that stack does not cross page boundaries when using the SMALL
stack model.
+\end_layout
\end_inset
\newline
The format is as follows:
+\newline
-\layout LyX-Code
+\end_layout
+
+\begin_layout LyX-Code
#pragma stack bottom_address [stack_size]
+\newline
-\layout Standard
+\end_layout
+
+\begin_layout Standard
\emph on
bottom_address
\emph default
is the lower bound of the stack section.
The stack pointer initially will point at address (bottom_address+stack_size-1).
+\end_layout
-\layout LyX-Code
+\begin_layout LyX-Code
Example:
+\end_layout
-\layout LyX-Code
+\begin_layout LyX-Code
+\end_layout
-\layout LyX-Code
+\begin_layout LyX-Code
/* initializes stack of 100 bytes at RAM address 0x200 */
+\end_layout
-\layout LyX-Code
+\begin_layout LyX-Code
#pragma stack 0x200 100
+\end_layout
-\layout Standard
+\begin_layout Standard
If the stack_size field is omitted then a stack is created with the default
size of 64.
This size might be enough for most programs, but its not enough for operations
with deep function nesting or excessive stack usage.
+\end_layout
-\layout List
-\labelwidthstring 00.00.0000
+\begin_layout Description
code
\begin_inset LatexCommand \index{PIC16!Pragmas!\#pragma code}
\end_inset
- place a function symbol at static FLASH address
+ Force a function to a static FLASH address.
+\end_layout
-\layout LyX-Code
+\begin_layout LyX-Code
Example:
+\end_layout
-\layout LyX-Code
+\begin_layout LyX-Code
+\end_layout
-\layout LyX-Code
+\begin_layout LyX-Code
/* place function test_func at 0x4000 */
+\end_layout
-\layout LyX-Code
+\begin_layout LyX-Code
#pragma code test_func 0x4000
+\end_layout
-\layout LyX-Code
+\begin_layout LyX-Code
+\end_layout
-\layout List
-\labelwidthstring 00.00.0000
+\begin_layout Description
library instructs the linker to use a library module.
\newline
Usage:
+\end_layout
-\layout LyX-Code
+\begin_layout LyX-Code
#pragma library module_name
+\end_layout
-\layout Standard
+\begin_layout Standard
\emph on
module_name
can be any library or object file (including its path).
Note that there are four reserved keywords which have special meaning.
These are:
+\end_layout
-\layout Standard
+\begin_layout Standard
\align center
\begin_inset Tabular
<lyxtabular version="3" rows="6" columns="3">
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
Keyword
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
Description
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
Module to link
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\series bold
ignore
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
ignore all library pragmas
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\emph on
(none)
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\series bold
c
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
link the C library
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\emph on
libc18f
\emph default
.lib
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\series bold
math
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
link the Math libarary
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\emph on
libm18f
\emph default
.lib
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\series bold
io
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
link the I/O library
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\emph on
libio18f*
\emph default
.lib
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\series bold
debug
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
link the debug library
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\emph on
libdebug
\emph default
.lib
+\end_layout
\end_inset
</cell>
\newline
* is the device number, i.e.
452 for PIC18F452 MCU.
+\end_layout
-\layout Standard
+\begin_layout Standard
This feature allows for linking with specific libraries withoug having to
explicit name them in the command line.
Note that the
ignore
\noun default
keyword will reject all modules specified by the library pragma.
+\end_layout
-\layout List
-\labelwidthstring 00.00.0000
-udata pragma udata instructs the compiler to emit code so that linker will
- place a variable at a specific memory bank
+\begin_layout Description
+udata The pragma udata instructs the compiler to emit code so that linker
+ will place a variable at a specific memory bank.
+\end_layout
-\layout LyX-Code
+\begin_layout LyX-Code
Example:
+\end_layout
-\layout LyX-Code
+\begin_layout LyX-Code
+\end_layout
-\layout LyX-Code
+\begin_layout LyX-Code
/* places variable foo at bank2 */
+\end_layout
-\layout LyX-Code
+\begin_layout LyX-Code
#pragma udata bank2 foo
+\end_layout
-\layout LyX-Code
+\begin_layout LyX-Code
char foo;
+\end_layout
-\layout Standard
+\begin_layout Standard
In order for this pragma to work extra SECTION directives should be added
in the .lkr script.
In the following example a sample .lkr file is shown:
+\end_layout
-\layout LyX-Code
+\begin_layout LyX-Code
+\end_layout
-\layout LyX-Code
+\begin_layout LyX-Code
// Sample linker script for the PIC18F452 processor
+\end_layout
-\layout LyX-Code
+\begin_layout LyX-Code
LIBPATH .
+\end_layout
-\layout LyX-Code
+\begin_layout LyX-Code
CODEPAGE NAME=vectors START=0x0 END=0x29 PROTECTED
+\end_layout
-\layout LyX-Code
+\begin_layout LyX-Code
CODEPAGE NAME=page START=0x2A END=0x7FFF
+\end_layout
-\layout LyX-Code
+\begin_layout LyX-Code
CODEPAGE NAME=idlocs START=0x200000 END=0x200007 PROTECTED
+\end_layout
-\layout LyX-Code
+\begin_layout LyX-Code
CODEPAGE NAME=config START=0x300000 END=0x30000D PROTECTED
+\end_layout
-\layout LyX-Code
+\begin_layout LyX-Code
CODEPAGE NAME=devid START=0x3FFFFE END=0x3FFFFF PROTECTED
+\end_layout
-\layout LyX-Code
+\begin_layout LyX-Code
CODEPAGE NAME=eedata START=0xF00000 END=0xF000FF PROTECTED
+\end_layout
-\layout LyX-Code
+\begin_layout LyX-Code
ACCESSBANK NAME=accessram START=0x0 END=0x7F
+\end_layout
-\layout LyX-Code
+\begin_layout LyX-Code
+\end_layout
-\layout LyX-Code
+\begin_layout LyX-Code
DATABANK NAME=gpr0 START=0x80 END=0xFF
+\end_layout
-\layout LyX-Code
+\begin_layout LyX-Code
DATABANK NAME=gpr1 START=0x100 END=0x1FF
+\end_layout
-\layout LyX-Code
+\begin_layout LyX-Code
DATABANK NAME=gpr2 START=0x200 END=0x2FF
+\end_layout
-\layout LyX-Code
+\begin_layout LyX-Code
DATABANK NAME=gpr3 START=0x300 END=0x3FF
+\end_layout
-\layout LyX-Code
+\begin_layout LyX-Code
DATABANK NAME=gpr4 START=0x400 END=0x4FF
+\end_layout
-\layout LyX-Code
+\begin_layout LyX-Code
DATABANK NAME=gpr5 START=0x500 END=0x5FF
+\end_layout
-\layout LyX-Code
+\begin_layout LyX-Code
ACCESSBANK NAME=accesssfr START=0xF80 END=0xFFF PROTECTED
+\end_layout
-\layout LyX-Code
+\begin_layout LyX-Code
+\end_layout
-\layout LyX-Code
+\begin_layout LyX-Code
SECTION NAME=CONFIG ROM=config
+\end_layout
-\layout LyX-Code
+\begin_layout LyX-Code
+\end_layout
-\layout LyX-Code
+\begin_layout LyX-Code
SECTION NAME=bank0 RAM=gpr0 # these SECTION directives
+\end_layout
-\layout LyX-Code
+\begin_layout LyX-Code
SECTION NAME=bank1 RAM=gpr1 # should be added to link
+\end_layout
-\layout LyX-Code
+\begin_layout LyX-Code
SECTION NAME=bank2 RAM=gpr2 # section name 'bank?' with
+\end_layout
-\layout LyX-Code
+\begin_layout LyX-Code
SECTION NAME=bank3 RAM=gpr3 # a specific DATABANK name
+\end_layout
-\layout LyX-Code
+\begin_layout LyX-Code
SECTION NAME=bank4 RAM=gpr4
+\end_layout
-\layout LyX-Code
+\begin_layout LyX-Code
SECTION NAME=bank5 RAM=gpr5
+\end_layout
-\layout Standard
+\begin_layout Standard
The linker will recognise the section name set in the pragma statement and
will position the variable at the memory bank set with the RAM field at
the SECTION line in the linker script file.
+\end_layout
-\layout Subsection
+\begin_layout Subsection
Header Files
\begin_inset LatexCommand \label{sub:PIC16_Header-Files}
\end_inset
+\end_layout
-\layout Standard
+\begin_layout Standard
There is one main header file
\begin_inset LatexCommand \index{PIC16!Header files}
so it is necessary if the source accesses them.
It can be included by adding the following line in the beginning of the
file:
+\end_layout
-\layout LyX-Code
+\begin_layout LyX-Code
#include <pic18fregs.h>
+\end_layout
-\layout Standard
+\begin_layout Standard
The specific microcontroller is selected within the pic18fregs.h automatically,
so the same source can be used with a variety of devices.
+\end_layout
-\layout Subsection
+\begin_layout Subsection
Libraries
+\end_layout
-\layout Standard
+\begin_layout Standard
The libraries
\begin_inset LatexCommand \index{PIC16!Libraries}
is the microcontroller identification number.
The specific library is selected automatically by the compiler at link
stage according to the selected device.
+\end_layout
-\layout Standard
+\begin_layout Standard
Libraries are created with gplib which is part of the gputils package
\begin_inset LatexCommand \url{http://sourceforge.net/projects/gputils}
\end_inset
.
+\end_layout
-\layout Subsubsection*
+\begin_layout Subsubsection*
Building the libraries
+\end_layout
-\layout Standard
+\begin_layout Standard
Before using SDCC/pic16 there are some libraries that need to be compiled.
This process is not done automatically by SDCC since not all users use
SDCC for pic16 projects.
So each user should compile the libraries separately.
+\end_layout
-\layout Standard
-The steps to compile the pic16 libraries under Linux are:
+\begin_layout Standard
+The steps to compile the pic16 libraries under Linux and Mac OS X are:
+\end_layout
-\layout LyX-Code
+\begin_layout LyX-Code
cd device/lib/pic16
+\end_layout
-\layout LyX-Code
+\begin_layout LyX-Code
./configure
+\end_layout
-\layout LyX-Code
+\begin_layout LyX-Code
make
+\end_layout
-\layout LyX-Code
+\begin_layout LyX-Code
cd ..
+\end_layout
-\layout LyX-Code
+\begin_layout LyX-Code
make model-pic16
+\end_layout
-\layout LyX-Code
+\begin_layout LyX-Code
su -c 'make install' # install the libraries, you need the root password
+\end_layout
-\layout Standard
+\begin_layout Standard
If you need to install the headers too, do:
+\end_layout
-\layout LyX-Code
+\begin_layout LyX-Code
cd device/include
+\end_layout
-\layout LyX-Code
+\begin_layout LyX-Code
su -c 'make install' # install the headers, you need the root password
+\end_layout
-\layout Standard
+\begin_layout Standard
There exist a special target to build the I/O libraries.
This target is not automatically build because it will build the I/O library
for
device/lib/pic16/pics.build
\series default
file and then execute:
+\end_layout
-\layout LyX-Code
+\begin_layout LyX-Code
make lib-io
+\end_layout
+
+\begin_layout Subsection
+Adding New Devices to the Port
+\end_layout
+
+\begin_layout Standard
+Adding support for a new 16
+\begin_inset ERT
+status open
+
+\begin_layout Standard
+
+
+\backslash
+,
+\end_layout
+
+\end_inset
+
+bit PIC MCU requires the following steps:
+\end_layout
+
+\begin_layout Enumerate
+Create picDEVICE.c and picDEVICE.h from pDEVICE.inc using
+\newline
+
+\family typewriter
+perl /path/to/sdcc/support/scripts/inc2h-pic16.pl /path/to/gputils/header/pDEVICE.
+inc
+\end_layout
+
+\begin_layout Enumerate
+
+\family typewriter
+mv picDEVICE.h /path/to/sdcc/device/include/pic16
+\end_layout
+
+\begin_layout Enumerate
+
+\family typewriter
+mv picDEVICE.c /path/to/sdcc/device/lib/pic16/libdev
+\end_layout
+
+\begin_layout Enumerate
+Add DEVICE to
+\family typewriter
+/path/to/sdcc/device/lib/pics.all
+\family default
+ (and
+\family typewriter
+.build
+\family default
+).
+\newline
+Note: No 18f prefix here!
+\end_layout
+
+\begin_layout Enumerate
+Adjust
+\family typewriter
+/path/to/sdcc/device/lib/pic16/libio/*.ignore
+\family default
+
+\newline
+Add your DEVICE if it does not compile in
+\family typewriter
+adc
+\family default
+,
+\family typewriter
+i2c
+\family default
+, or
+\family typewriter
+usart
+\family default
+.
+\end_layout
+
+\begin_layout Enumerate
+Edit
+\family typewriter
+/path/to/sdcc/device/include/pic16/pic18fregs.h
+\family default
+.
+ The file format is self-explanatory, just add
+\newline
+
+\family typewriter
+#elif defined(picDEVICE)
+\newline
+# include <picDEVICE.h>
+\family default
+
+\newline
+at the right place (keep it sorted).
+\end_layout
-\layout Subsection
+\begin_layout Enumerate
+Edit
+\family typewriter
+/path/to/sdcc/src/pic16/devices.inc
+\family default
+.
+ Copy and modify an existing entry and insert it at the correct place (keep
+ the file sorted).
+ The file is hardly documented, look at the entries for the 18f2221...
+\end_layout
+
+\begin_layout Enumerate
+Recompile SDCC, including the pic16 libraries.
+\end_layout
+
+\begin_layout Subsection
Memory Models
+\end_layout
-\layout Standard
+\begin_layout Standard
The following memory models are supported by the PIC16 port:
+\end_layout
-\layout Itemize
+\begin_layout Itemize
small model
+\end_layout
-\layout Itemize
+\begin_layout Itemize
large model
+\end_layout
-\layout Standard
+\begin_layout Standard
Memory model affects the default size of pointers within the source.
The sizes are shown in the next table:
+\end_layout
-\layout Standard
+\begin_layout Standard
\align center
\begin_inset Tabular
<lyxtabular version="3" rows="3" columns="3">
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
Pointer sizes according to memory model
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
small model
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
large model
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
code pointers
+\end_layout
\end_inset
</cell>
<cell multicolumn="1" alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
16-bits
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
24-bits
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
data pointers
+\end_layout
\end_inset
</cell>
<cell multicolumn="1" alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
16-bits
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
16-bits
+\end_layout
\end_inset
</cell>
\end_inset
+\end_layout
-\layout Standard
+\begin_layout Standard
It is advisable that all sources within a project are compiled with the
same memory model.
If one wants to override the default memory model, this can be done by
.
Far selects large memory model's pointers, while near selects small memory
model's pointers.
+\end_layout
-\layout Standard
+\begin_layout Standard
The standard device libraries (see
\begin_inset LatexCommand \ref{sub:PIC16_Header-Files}
) contain no reference to pointers, so they can be used with both memory
models.
+\end_layout
-\layout Subsection
+\begin_layout Subsection
Stack
+\end_layout
-\layout Standard
+\begin_layout Standard
The stack
\begin_inset LatexCommand \index{PIC16!stack}
implementation for the PIC16 port uses two indirect registers, FSR1 and
FSR2.
+\end_layout
-\layout List
-\labelwidthstring 00.00.0000
+\begin_layout Description
FSR1 is assigned as stack pointer
+\end_layout
-\layout List
-\labelwidthstring 00.00.0000
+\begin_layout Description
FSR2 is assigned as frame pointer
+\end_layout
-\layout Standard
+\begin_layout Standard
The following stack models are supported by the PIC16 port
+\end_layout
-\layout Itemize
+\begin_layout Itemize
\noun on
small
\noun default
model
+\end_layout
-\layout Itemize
+\begin_layout Itemize
\noun on
large
\noun default
model
+\end_layout
-\layout Standard
+\begin_layout Standard
\noun on
Small
uses both FSRxL and FSRxH registers.
The following table shows the stack/frame pointers sizes according to stack
model and the maximum space they can address:
+\end_layout
-\layout Standard
+\begin_layout Standard
\align center
\begin_inset Tabular
<lyxtabular version="3" rows="3" columns="3">
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
Stack & Frame pointer sizes according to stack model
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
small
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
large
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
Stack pointer FSR1
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
8-bits
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
16-bits
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
Frame pointer FSR2
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
8-bits
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
16-bits
+\end_layout
\end_inset
</cell>
\end_inset
+\end_layout
-\layout Standard
+\begin_layout Standard
\noun on
Large
Also there are some other points that need special care:
\newline
+\end_layout
-\layout Enumerate
+\begin_layout Enumerate
Do not create stack sections with size more than one physical bank (that
is 256 bytes)
+\end_layout
-\layout Enumerate
+\begin_layout Enumerate
Stack sections should no cross physical bank limits (i.e.
#pragma stack 0x50 0x100)
+\end_layout
-\layout Standard
+\begin_layout Standard
These limitations are caused by the fact that only FSRxL is modified when
using SMALL stack model, so no more than 256 bytes of stack can be used.
This problem will disappear after LARGE model is fully implemented.
+\end_layout
-\layout Subsection
+\begin_layout Subsection
Functions
+\end_layout
-\layout Standard
+\begin_layout Standard
In addition to the standard SDCC function keywords, PIC16
\begin_inset LatexCommand \index{PIC16}
\end_inset
port makes available two more:
+\end_layout
-\layout List
-\labelwidthstring 00.00.0000
+\begin_layout Description
wparam
\begin_inset LatexCommand \index{PIC16!wparam}
that are called via function pointers, otherwise the first byte of the
first parameter will get lost.
Usage:
+\end_layout
-\layout LyX-Code
+\begin_layout LyX-Code
void func_wparam(int a) wparam
+\end_layout
-\layout LyX-Code
+\begin_layout LyX-Code
{
+\end_layout
-\layout LyX-Code
+\begin_layout LyX-Code
/* WREG hold the lower part of a */
+\end_layout
-\layout LyX-Code
+\begin_layout LyX-Code
/* the high part of a is stored in FSR2+2 (or +3 for large stack model)
*/
+\end_layout
-\layout LyX-Code
+\begin_layout LyX-Code
...
+\end_layout
-\layout LyX-Code
+\begin_layout LyX-Code
}
+\end_layout
-\layout List
-\labelwidthstring 00.00.0000
+\begin_layout Description
shadowregs
\begin_inset LatexCommand \index{PIC16!shadowregs}
interrupt
\emph default
keyword in the function's header.
+\end_layout
-\layout LyX-Code
+\begin_layout LyX-Code
void isr_shadow(void) shadowregs interrupt 1
+\end_layout
-\layout LyX-Code
+\begin_layout LyX-Code
{
+\end_layout
-\layout LyX-Code
+\begin_layout LyX-Code
...
+\end_layout
-\layout LyX-Code
+\begin_layout LyX-Code
}
+\end_layout
-\layout Standard
+\begin_layout Standard
\emph on
shadowregs
\emph default
instructs the code generator not to store/restore WREG, STATUS, BSR when
entering/exiting the ISR.
+\end_layout
-\layout Subsection
+\begin_layout Subsection
Function return values
+\end_layout
-\layout Standard
+\begin_layout Standard
Return values from functions are placed to the appropriate registers following
a modified Microchip policy optimized for SDCC.
The following table shows these registers:
+\end_layout
-\layout Standard
+\begin_layout Standard
\align center
\begin_inset Tabular
<lyxtabular version="3" rows="6" columns="2">
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
size
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
destination register
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
8 bits
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
WREG
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
16 bits
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
PRODL:WREG
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
24 bits
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
PRODH:PRODL:WREG
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
32 bits
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
FSR0L:PRODH:PRODL:WREG
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
>32 bits
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
on stack, FSR0 points to the beginning
+\end_layout
\end_inset
</cell>
\end_inset
+\end_layout
-\layout Subsection
+\begin_layout Subsection
Interrupts
+\end_layout
-\layout Standard
+\begin_layout Standard
An interrupt
\begin_inset LatexCommand \index{PIC16!interrupt}
interrupt
\emph default
keyword.
+\end_layout
-\layout LyX-Code
+\begin_layout LyX-Code
void isr(void) interrupt
\emph on
n
+\end_layout
-\layout LyX-Code
+\begin_layout LyX-Code
{
+\end_layout
-\layout LyX-Code
+\begin_layout LyX-Code
...
+\end_layout
-\layout LyX-Code
+\begin_layout LyX-Code
}
+\end_layout
-\layout Standard
+\begin_layout Standard
\emph on
n
\emph default
is the interrupt number, which for PIC18F devices can be:
+\end_layout
-\layout Standard
+\begin_layout Standard
\align center
\begin_inset Tabular
<lyxtabular version="3" rows="4" columns="3">
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\emph on
n
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
Interrupt Vector
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
Interrupt Vector Address
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
0
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
RESET vector
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
0x000000
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\family roman
\series medium
\noun off
\color none
1
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\family roman
\series medium
\noun off
\color none
HIGH priority interrupts
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
0x000008
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
2
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
LOW priority interrupts
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
0x000018
+\end_layout
\end_inset
</cell>
\end_inset
+\end_layout
-\layout Standard
+\begin_layout Standard
When generating assembly code for ISR the code generator places a
\noun on
goto
Address of the specific interrupt.
This is not a problem for the LOW priority interrupts, but it is a problem
for the RESET and the HIGH priority interrupts because code may be written
- at the next interrupt´s vector address and cause undeterminate program
+ at the next interrupt's vector address and cause undeterminate program
behaviour if that interrupt is raised.
\begin_inset Foot
-collapsed false
+status open
-\layout Standard
+\begin_layout Standard
This is not a problem when
+\end_layout
-\layout Enumerate
+\begin_layout Enumerate
this is a HIGH interrupt ISR and LOW interrupts are
\emph on
disabled
\emph default
or not used.
+\end_layout
-\layout Enumerate
-when the ISR is small enough not to reach the next interrupt´s vector address.
+\begin_layout Enumerate
+when the ISR is small enough not to reach the next interrupt's vector address.
+\end_layout
\end_inset
+\end_layout
-\layout Standard
+\begin_layout Standard
\emph on
n
\emph default
- is possible to be omitted.
+ may be omitted.
This way a function is generated similar to an ISR, but it is not assigned
to any interrupt.
+\end_layout
-\layout Standard
+\begin_layout Standard
When entering an interrupt, currently the PIC16
\begin_inset LatexCommand \index{PIC16}
\end_inset
port automatically saves the following registers:
+\end_layout
-\layout Itemize
+\begin_layout Itemize
WREG
+\end_layout
-\layout Itemize
+\begin_layout Itemize
STATUS
+\end_layout
-\layout Itemize
+\begin_layout Itemize
BSR
+\end_layout
-\layout Itemize
+\begin_layout Itemize
PROD (PRODL and PRODH)
+\end_layout
-\layout Itemize
+\begin_layout Itemize
FSR0 (FSR0L and FSR0H)
+\end_layout
-\layout Standard
+\begin_layout Standard
These registers are restored upon return from the interrupt routine.
\begin_inset Foot
-collapsed false
+status open
-\layout Standard
+\begin_layout Standard
NOTE that when the _naked attribute is specified for an interrupt routine,
then NO registers are stored or restored.
+\end_layout
\end_inset
+\end_layout
-\layout Subsection
+\begin_layout Subsection
Generic Pointers
+\end_layout
-\layout Standard
+\begin_layout Standard
Generic pointers are implemented in PIC16 port as 3-byte (24-bit) types.
There are 3 types of generic pointers currently implemented data, code
and eeprom pointers.
They are differentiated by the value of the 7th and 6th bits of the upper
byte:
+\end_layout
-\layout Standard
+\begin_layout Standard
\align center
\begin_inset Tabular
<lyxtabular version="3" rows="5" columns="5">
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
pointer type
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
7th bit
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
6th bit
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
rest of the pointer
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
description
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
data
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
1
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
0
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\family typewriter
\shape slanted
\emph on
uuuuuu uuuuxxxx xxxxxxxx
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
a 12-bit data pointer in data RAM memory
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
code
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
0
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
0
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\family typewriter
\shape slanted
\emph on
uxxxxx xxxxxxxx xxxxxxxx
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
a 21-bit code pointer in FLASH memory
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
eeprom
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
0
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
1
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\family typewriter
\shape slanted
\emph on
uuuuuu uuuuuuxx xxxxxxxx
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
a 10-bit eeprom pointer in EEPROM memory
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
(unimplemented)
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
1
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
1
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\family typewriter
\shape slanted
\emph on
xxxxxx xxxxxxxx xxxxxxxx
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
unimplemented pointer type
+\end_layout
\end_inset
</cell>
\end_inset
+\end_layout
-\layout Standard
+\begin_layout Standard
Generic pointer are read and written with a set of library functions which
read/write 1, 2, 3, 4 bytes.
+\end_layout
-\layout Subsection
+\begin_layout Subsection
PIC16 C Libraries
+\end_layout
-\layout Subsubsection
+\begin_layout Subsubsection
Standard I/O Streams
+\end_layout
-\layout Standard
+\begin_layout Standard
In the
\emph on
stdio.h
\emph default
the type FILE is defined as:
+\end_layout
-\layout LyX-Code
+\begin_layout LyX-Code
typedef char * FILE;
+\end_layout
-\layout Standard
+\begin_layout Standard
This type is the stream type implemented I/O in the PIC18F devices.
Also the standard input and output streams are declared in stdio.h:
+\end_layout
-\layout LyX-Code
+\begin_layout LyX-Code
extern FILE * stdin;
+\end_layout
-\layout LyX-Code
+\begin_layout LyX-Code
extern FILE * stdout;
+\end_layout
-\layout Standard
+\begin_layout Standard
The FILE type is actually a generic pointer which defines one more type
of generic pointers, the
\emph on
\emph default
pointer.
This new type has the format:
+\end_layout
-\layout Standard
+\begin_layout Standard
\align center
\begin_inset Tabular
<lyxtabular version="3" rows="2" columns="7">
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
pointer type
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
<7:6>
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
<5>
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
<4>
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
<3:0>
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
rest of the pointer
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
descrption
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
stream
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
00
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
1
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
0
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
nnnn
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\family typewriter
\shape slanted
\emph on
uuuuuuuu uuuuuuuu
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
upper byte high nubble is 0x2n, the rest are zeroes
+\end_layout
\end_inset
</cell>
\end_inset
+\end_layout
-\layout Standard
+\begin_layout Standard
Currently implemented there are 3 types of streams defined:
+\end_layout
-\layout Standard
+\begin_layout Standard
\align center
\begin_inset Tabular
<lyxtabular version="3" rows="4" columns="4">
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
stream type
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
value
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
module
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
description
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
STREAM_USART
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\family typewriter
0x200000UL
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
USART
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
Writes/Reads characters via the USART peripheral
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
STREAM_MSSP
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\family typewriter
0x210000UL
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
MSSP
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
Writes/Reads characters via the MSSP peripheral
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
STREAM_USER
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\family typewriter
0x2f0000UL
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
(none)
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
Writes/Reads characters via used defined functions
+\end_layout
\end_inset
</cell>
\end_inset
+\end_layout
-\layout Standard
+\begin_layout Standard
The stream identifiers are declared as macros in the stdio.h header.
+\end_layout
-\layout Standard
+\begin_layout Standard
In the libc library there exist the functions that are used to write to
each of the above streams.
These are
+\end_layout
-\layout List
-\labelwidthstring 00.00.0000
+\begin_layout Description
_
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
_stream_usart_putchar writes a character at the USART stream
+\end_layout
-\layout List
-\labelwidthstring 00.00.0000
+\begin_layout Description
_
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
_stream_mssp_putchar writes a character at the MSSP stream
+\end_layout
-\layout List
-\labelwidthstring 00.00.0000
+\begin_layout Description
putchar dummy function.
This writes a character to a user specified manner.
+\end_layout
-\layout Standard
+\begin_layout Standard
In order to increase performance
\emph on
putchar
\emph default
is the name of the variable that holds the character to print.
An example follows:
+\end_layout
-\layout LyX-Code
+\begin_layout LyX-Code
#include <pic18fregs.h>
\newline
#include <stdio.h>
\newline
PUTCHAR( c )
+\end_layout
-\layout LyX-Code
+\begin_layout LyX-Code
{
+\end_layout
-\layout LyX-Code
+\begin_layout LyX-Code
PORTA = c; /* dump character c to PORTA */
+\end_layout
-\layout LyX-Code
+\begin_layout LyX-Code
}
\newline
\newline
void main(void)
+\end_layout
-\layout LyX-Code
+\begin_layout LyX-Code
{
+\end_layout
-\layout LyX-Code
+\begin_layout LyX-Code
stdout = STREAM_USER; /* this is not necessary, since stdout points
+\end_layout
-\layout LyX-Code
+\begin_layout LyX-Code
* by default to STREAM_USER */
+\end_layout
-\layout LyX-Code
- printf (¨This is a printf test
+\begin_layout LyX-Code
+ printf (
+\begin_inset Quotes sld
+\end_inset
+
+This is a printf test
\backslash
-n¨);
+n
+\begin_inset Quotes srd
+\end_inset
-\layout LyX-Code
+);
+\end_layout
+
+\begin_layout LyX-Code
}
+\end_layout
-\layout LyX-Code
+\begin_layout LyX-Code
+\end_layout
-\layout Subsubsection
+\begin_layout Subsubsection
Printing functions
+\end_layout
-\layout Standard
+\begin_layout Standard
PIC16 contains an implementation of the printf-family of functions.
There exist the following functions:
+\end_layout
-\layout LyX-Code
+\begin_layout LyX-Code
extern unsigned int sprintf(char *buf, char *fmt, ...);
+\end_layout
-\layout LyX-Code
+\begin_layout LyX-Code
extern unsigned int vsprintf(char *buf, char *fmt, va_list ap);
+\end_layout
-\layout LyX-Code
+\begin_layout LyX-Code
+\end_layout
-\layout LyX-Code
+\begin_layout LyX-Code
extern unsigned int printf(char *fmt, ...);
+\end_layout
-\layout LyX-Code
+\begin_layout LyX-Code
extern unsigned int vprintf(char *fmt, va_lista ap);
+\end_layout
-\layout LyX-Code
+\begin_layout LyX-Code
+\end_layout
-\layout LyX-Code
+\begin_layout LyX-Code
extern unsigned int fprintf(FILE *fp, char *fmt, ...);
+\end_layout
-\layout LyX-Code
+\begin_layout LyX-Code
extern unsigned int vfprintf(FILE *fp, char *fmt, va_list ap);
+\end_layout
-\layout Standard
+\begin_layout Standard
For sprintf and vsprintf
\emph on
buf
\emph default
should be a stream pointer (i.e.
stdout, STREAM_MSSP, etc...).
+\end_layout
-\layout Subsubsection
+\begin_layout Subsubsection
Signals
+\end_layout
-\layout Standard
+\begin_layout Standard
The PIC18F family of microcontrollers supports a number of interrupt sources.
A list of these interrupts is shown in the following table:
+\end_layout
-\layout Standard
+\begin_layout Standard
\align center
\begin_inset Tabular
<lyxtabular version="3" rows="11" columns="4">
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
signal name
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
description
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
signal name
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
descritpion
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
SIG_RB
+\end_layout
\end_inset
</cell>
<cell multicolumn="1" alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
PORTB change interrupt
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
SIG_EE
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
EEPROM/FLASH write complete interrupt
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
SIG_INT0
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
INT0 external interrupt
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
SIG_BCOL
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
Bus collision interrupt
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
SIG_INT1
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
INT1 external interrupt
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
SIG_LVD
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
Low voltage detect interrupt
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
SIG_INT2
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
INT2 external interrupt
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
SIG_PSP
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
Parallel slave port interrupt
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
SIG_CCP1
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
CCP1 module interrupt
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
SIG_AD
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
AD convertion complete interrupt
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
SIG_CCP2
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
CCP2 module interrupt
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
SIG_RC
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
USART receive interrupt
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
SIG_TMR0
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
TMR0 overflow interrupt
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
SIG_TX
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
USART transmit interrupt
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
SIG_TMR1
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
TMR1 overflow interrupt
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
SIG_MSSP
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
SSP receive/transmit interrupt
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
SIG_TMR2
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
TMR2 matches PR2 interrupt
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
SIG_TMR3
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
TMR3 overflow interrupt
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
+\end_layout
\end_inset
</cell>
\end_inset
+\end_layout
-\layout Standard
+\begin_layout Standard
The prototypes for these names are defined in the header file
\emph on
signal.h
\emph default
.
+\end_layout
-\layout Standard
+\begin_layout Standard
In order to simplify signal handling, a number of macros is provided:
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
DEF_INTHIGH(name) begin the definition of the interrupt dispatch table for
high priority interrupts.
name
\emph default
is the function name to use.
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
DEF_INTLOW(name) begin the definition of the interrupt dispatch table fo
low priority interrupt.
name
\emph default
is the function name to use.
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
DEF_HANDLER(sig,handler) define a handler for signal
\emph on
sig.
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
END_DEF end the declaration of the dispatch table.
+\end_layout
-\layout Standard
+\begin_layout Standard
Additionally there are two more macros to simplify the declaration of the
signal handler:
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
\series medium
handler
\emph default
function.
+\end_layout
-\layout List
+\begin_layout List
\labelwidthstring 00.00.0000
SIGHANDLERNAKED(handler) same as SIGHANDLER() but declares a naked function.
+\end_layout
-\layout Standard
+\begin_layout Standard
An example of using the macros above is shown below:
+\end_layout
-\layout LyX-Code
+\begin_layout LyX-Code
#include <pic18fregs.h>
+\end_layout
-\layout LyX-Code
+\begin_layout LyX-Code
#include <signal.h>
\newline
\newline
DEF_INTHIGH(high_int)
+\end_layout
-\layout LyX-Code
+\begin_layout LyX-Code
DEF_HANDLER(SIG_TMR0, _tmr0_handler)
+\end_layout
-\layout LyX-Code
+\begin_layout LyX-Code
DEF_HANDLER(SIG_BCOL, _bcol_handler)
+\end_layout
-\layout LyX-Code
+\begin_layout LyX-Code
END_DEF
\newline
\newline
SIGHANDLER(_tmr0_handler)
+\end_layout
-\layout LyX-Code
+\begin_layout LyX-Code
{
+\end_layout
-\layout LyX-Code
+\begin_layout LyX-Code
/* action to be taken when timer 0 overflows */
+\end_layout
-\layout LyX-Code
+\begin_layout LyX-Code
}
\newline
\newline
SIGHANDLERNAKED(_bcol_handler)
+\end_layout
-\layout LyX-Code
+\begin_layout LyX-Code
{
+\end_layout
-\layout LyX-Code
+\begin_layout LyX-Code
_asm
+\end_layout
-\layout LyX-Code
+\begin_layout LyX-Code
/* action to be taken when bus collision occurs */
+\end_layout
-\layout LyX-Code
+\begin_layout LyX-Code
retfie
+\end_layout
-\layout LyX-Code
+\begin_layout LyX-Code
_endasm;
+\end_layout
-\layout LyX-Code
+\begin_layout LyX-Code
}
+\end_layout
-\layout Standard
+\begin_layout Standard
\series bold
NOTES:
\series default
Special care should be taken when using the above scheme:
+\end_layout
-\layout Itemize
+\begin_layout Itemize
do not place a colon (;) at the end of the DEF_* and END_DEF macros.
+\end_layout
-\layout Itemize
+\begin_layout Itemize
when declaring SIGHANDLERNAKED handler never forget to use
\emph on
retfie
\emph default
for proper returning.
+\end_layout
-\layout Subsection
+\begin_layout Subsection
PIC16 Port -- Tips
+\end_layout
-\layout Standard
+\begin_layout Standard
Here you can find some general tips for compiling programs with SDCC/pic16.
+\end_layout
-\layout Subsubsection
+\begin_layout Subsubsection
Stack size
+\end_layout
-\layout Standard
+\begin_layout Standard
The default stack
\begin_inset LatexCommand \index{PIC16!stack}
need to set the stack size around the maximum (256 for small stack model).
The following diagram shows what happens when calling printf to print an
integer:
+\end_layout
-\layout LyX-Code
+\begin_layout LyX-Code
printf () --> ltoa () --> ultoa () --> divschar ()
+\end_layout
-\layout Standard
+\begin_layout Standard
It is should be understood that stack is easily consumed when calling complicate
d functions.
Using command line arguments like -
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
-fommit-frame-pointer might reduce stack usage by not creating unnecessery
stack frames.
Other ways to reduce stack usage may exist.
+\end_layout
-\layout Subsection
-Known bugs
+\begin_layout Subsection
+Known Bugs
+\end_layout
-\layout Standard
+\begin_layout Standard
The PIC16 Port currently does not pass SDCC's regression test
\begin_inset LatexCommand \index{Regression test (PIC16)}
\end_inset
-) and thus the nightly regression tests for the PIC16 target are currently
- disabled for all hosts except for
+) and thus the snapshot build regression tests for the PIC16 target are
+ currently disabled for all hosts
\emph on
-Linux on Opteron.
-
-\emph default
- This means you can see the result of the PIC16 regression tests f.e.
- by checking the log files in
-\begin_inset LatexCommand \url{http://sdcc.sourceforge.net/regression_test_results/amd64-unknown-linux2.3/}
-
-\end_inset
-
- (pick the most up to date file there, scroll down, lend a hand).
+.
+\end_layout
-\layout Chapter
+\begin_layout Chapter
Debugging
+\end_layout
-\layout Standard
+\begin_layout Standard
There are several approaches to debugging your code.
This chapter is meant to show your options and to give detail on some of
them:
\newline
When writing your code:
+\end_layout
-\layout Itemize
+\begin_layout Itemize
write your code with debugging in mind (avoid duplicating code, put conceptually
similar variables into structs, use structured code, have strategic points
within your code where all variables are consistent, ...)
+\end_layout
-\layout Itemize
+\begin_layout Itemize
run a syntax-checking tool like splint
\begin_inset LatexCommand \index{splint (syntax checking tool)}
(see -
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
\end_inset
) over the code.
+\end_layout
-\layout Itemize
+\begin_layout Itemize
for the high level code use a C-compiler (like f.e.
GCC) to compile run and debug the code on your host.
See (see -
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
\end_inset
- ) on howto handle syntax extensions like __xdata, __at(), ...
+) on how to handle syntax extensions like __xdata, __at(), ...
+\end_layout
-\layout Itemize
+\begin_layout Itemize
use another C-compiler to compile code for your target.
Always an option but not recommended:) And not very likely to help you.
If you seriously consider walking this path you should at least occasionally
check portability of your code.
Most commercial compiler vendors will offer an evaluation version so you
can test compile your code or snippets of your code.
+\end_layout
-\layout Standard
+\begin_layout Standard
Debugging on a simulator:
+\end_layout
-\layout Itemize
+\begin_layout Itemize
there is a separate section about SDCDB (section
\begin_inset LatexCommand \ref{cha:Debugging-with-SDCDB}
\end_inset
) below.
+\end_layout
-\layout Itemize
+\begin_layout Itemize
or (8051 specific) use a freeware/commercial simulator which interfaces
to the AOMF
\begin_inset LatexCommand \index{AOMF, AOMF51}
\end_inset
) optionally generated by SDCC.
+\end_layout
-\layout Standard
+\begin_layout Standard
Debugging On-target:
+\end_layout
-\layout Itemize
+\begin_layout Itemize
use a MCU port pin to serially output debug data to the RS232 port of your
host.
You'll probably want some level shifting device typically involving a MAX232
or similar IC.
If the hardware serial port of the MCU is not available search for 'Software
UART' in your favourite search machine.
+\end_layout
-\layout Itemize
+\begin_layout Itemize
use an on-target monitor.
In this context a monitor is a small program which usually accepts commands
via a serial line and allows to set program counter, to single step through
\end_inset
).
+\end_layout
-\layout Itemize
+\begin_layout Itemize
toggle MCU port pins at strategic points within your code and use an oscilloscop
e.
A
If you need to monitor more pins than your oscilloscope provides you can
sometimes get away with a small R-2R network.
On a single channel oscilloscope you could f.e.
- monitor 2 push-pull driven pins by connecting one via a 10\SpecialChar ~
+ monitor 2 push-pull driven pins by connecting one via a 10\InsetSpace ~
k
\begin_inset Formula $\Omega$
\end_inset
- resistor and the other one by a 5\SpecialChar ~
+ resistor and the other one by a 5\InsetSpace ~
k
\begin_inset Formula $\Omega$
\end_inset
logic analyzer
\emph default
will be handy.
+\end_layout
-\layout Itemize
+\begin_layout Itemize
use an ICE (
\emph on
i
And very nice to have too.
And usually locks you (for years...) to the devices the ICE can emulate.
+\end_layout
-\layout Itemize
+\begin_layout Itemize
use a remote debugger.
In most 8-bit systems the symbol information is not available on the target,
and a complete debugger is too bulky for the target system.
Terms to enter into your favourite search engine could be 'remote debugging',
'gdb stub' or 'inferior debugger'.
(is there one?)
+\end_layout
-\layout Itemize
+\begin_layout Itemize
use an on target hardware debugger.
Some of the more modern MCUs include hardware support for setting break
points and monitoring/changing variables by using dedicated hardware pins.
) as input file.
+\end_layout
-\layout Standard
+\begin_layout Standard
Last not least:
+\end_layout
-\layout Itemize
+\begin_layout Itemize
if you are not familiar with any of the following terms you're likely to
run into problems rather sooner than later:
\emph on
before
\emph default
you have problems?)
+\end_layout
-\layout Itemize
+\begin_layout Itemize
tell someone else about your problem (actually this is a surprisingly effective
means to hunt down the bug even if the listener is not familiar with your
environment).
As 'failure to communicate' is probably one of the job-induced deformations
of an embedded programmer this is highly encouraged.
+\end_layout
-\layout Section
+\begin_layout Section
Debugging with SDCDB
\begin_inset LatexCommand \label{cha:Debugging-with-SDCDB}
\end_inset
+\end_layout
-\layout Standard
+\begin_layout Standard
SDCC is distributed with a source level debugger
\begin_inset LatexCommand \index{Debugger}
specified during configuration.
The debugger allows you debug BOTH at the C source and at the ASM source
level.
+\end_layout
-\layout Subsection
+\begin_layout Subsection
Compiling for Debugging
+\end_layout
-\layout Standard
+\begin_layout Standard
The -
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
files and the address information.
This .cdb is used by the debugger.
+\end_layout
-\layout Subsection
+\begin_layout Subsection
How the Debugger Works
+\end_layout
-\layout Standard
+\begin_layout Standard
When the -
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
\end_inset
is an effort to connect directly to the hardware.)
+\end_layout
-\layout Subsection
+\begin_layout Subsection
Starting the Debugger SDCDB
+\end_layout
-\layout Standard
+\begin_layout Standard
The debugger can be started using the following command line.
(Assume the file you are debugging has the file name foo).
\newline
\newline
The debugger will look for the following files.
+\end_layout
-\layout Itemize
+\begin_layout Itemize
foo.c - the source file.
+\end_layout
-\layout Itemize
+\begin_layout Itemize
foo.cdb - the debugger symbol information file.
+\end_layout
-\layout Itemize
+\begin_layout Itemize
foo.ihx - the Intel hex format
\begin_inset LatexCommand \index{Intel hex format}
\end_inset
object file.
+\end_layout
-\layout Subsection
+\begin_layout Subsection
SDCDB Command Line Options
+\end_layout
-\layout Itemize
+\begin_layout Itemize
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
if the source files can be in the directories /home/src1 and /home/src2,
the -
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
-directory option should be -
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
-directory=/home/src1:/home/src2.
Note there can be no spaces in the option.
+\end_layout
-\layout Itemize
+\begin_layout Itemize
-cd <directory> - change to the <directory>.
+\end_layout
-\layout Itemize
+\begin_layout Itemize
-fullname - used by GUI front ends.
+\end_layout
-\layout Itemize
+\begin_layout Itemize
-cpu <cpu-type> - this argument is passed to the simulator please see the
simulator docs for details.
+\end_layout
-\layout Itemize
+\begin_layout Itemize
-X <Clock frequency > this options is passed to the simulator please see
the simulator docs for details.
+\end_layout
-\layout Itemize
+\begin_layout Itemize
-s <serial port file> passed to simulator see the simulator docs for details.
+\end_layout
-\layout Itemize
+\begin_layout Itemize
-S <serial in,out> passed to simulator see the simulator docs for details.
+\end_layout
-\layout Itemize
+\begin_layout Itemize
-k <port number> passed to simulator see the simulator docs for details.
+\end_layout
-\layout Subsection
+\begin_layout Subsection
SDCDB Debugger Commands
+\end_layout
-\layout Standard
+\begin_layout Standard
As mentioned earlier the command interface for the debugger has been deliberatel
y kept as close the GNU debugger gdb, as possible.
This will help the integration with existing graphical user interfaces
(like ddd, xxgdb or xemacs) existing for the GNU debugger.
If you use a graphical user interface for the debugger you can skip this
section.
+\end_layout
-\layout Subsubsection*
+\begin_layout Subsubsection*
break [line | file:line | function | file:function]
+\end_layout
-\layout Standard
+\begin_layout Standard
Set breakpoint at specified line or function:
\newline
sdcdb>break funcfoo
\newline
sdcdb>break foo.c:funcfoo
+\end_layout
-\layout Subsubsection*
+\begin_layout Subsubsection*
clear [line | file:line | function | file:function ]
+\end_layout
-\layout Standard
+\begin_layout Standard
Clear breakpoint at specified line or function:
\newline
sdcdb>clear funcfoo
\newline
sdcdb>clear foo.c:funcfoo
+\end_layout
-\layout Subsubsection*
+\begin_layout Subsubsection*
continue
+\end_layout
-\layout Standard
+\begin_layout Standard
Continue program being debugged, after breakpoint.
+\end_layout
-\layout Subsubsection*
+\begin_layout Subsubsection*
finish
+\end_layout
-\layout Standard
+\begin_layout Standard
Execute till the end of the current function.
+\end_layout
-\layout Subsubsection*
+\begin_layout Subsubsection*
delete [n]
+\end_layout
-\layout Standard
+\begin_layout Standard
Delete breakpoint number 'n'.
If used without any option clear ALL user defined break points.
+\end_layout
-\layout Subsubsection*
+\begin_layout Subsubsection*
info [break | stack | frame | registers ]
+\end_layout
-\layout Itemize
+\begin_layout Itemize
info break - list all breakpoints
+\end_layout
-\layout Itemize
+\begin_layout Itemize
info stack - show the function call stack.
+\end_layout
-\layout Itemize
+\begin_layout Itemize
info frame - show information about the current execution frame.
+\end_layout
-\layout Itemize
+\begin_layout Itemize
info registers - show content of all registers.
+\end_layout
-\layout Subsubsection*
+\begin_layout Subsubsection*
step
+\end_layout
-\layout Standard
+\begin_layout Standard
Step program until it reaches a different source line.
Note: pressing <return> repeats the last command.
+\end_layout
-\layout Subsubsection*
+\begin_layout Subsubsection*
next
+\end_layout
-\layout Standard
+\begin_layout Standard
Step program, proceeding through subroutine calls.
+\end_layout
-\layout Subsubsection*
+\begin_layout Subsubsection*
run
+\end_layout
-\layout Standard
+\begin_layout Standard
Start debugged program.
+\end_layout
-\layout Subsubsection*
+\begin_layout Subsubsection*
ptype variable
+\end_layout
-\layout Standard
+\begin_layout Standard
Print type information of the variable.
+\end_layout
-\layout Subsubsection*
+\begin_layout Subsubsection*
print variable
+\end_layout
-\layout Standard
+\begin_layout Standard
print value of variable.
+\end_layout
-\layout Subsubsection*
+\begin_layout Subsubsection*
file filename
+\end_layout
-\layout Standard
+\begin_layout Standard
load the given file name.
Note this is an alternate method of loading file for debugging.
+\end_layout
-\layout Subsubsection*
+\begin_layout Subsubsection*
frame
+\end_layout
-\layout Standard
+\begin_layout Standard
print information about current frame.
+\end_layout
-\layout Subsubsection*
+\begin_layout Subsubsection*
set srcmode
+\end_layout
-\layout Standard
+\begin_layout Standard
Toggle between C source & assembly source.
+\end_layout
-\layout Subsubsection*
+\begin_layout Subsubsection*
! simulator command
+\end_layout
-\layout Standard
+\begin_layout Standard
Send the string following '!' to the simulator, the simulator response is
displayed.
Note the debugger does not interpret the command being sent to the simulator,
so if a command like 'go' is sent the debugger can loose its execution
context and may display incorrect values.
+\end_layout
-\layout Subsubsection*
+\begin_layout Subsubsection*
quit
+\end_layout
-\layout Standard
+\begin_layout Standard
"Watch me now.
Iam going Down.
My name is Bobby Brown"
+\end_layout
-\layout Subsection
+\begin_layout Subsection
Interfacing SDCDB with DDD
+\end_layout
-\layout Standard
-\begin_inset Note
-collapsed true
+\begin_layout Standard
+\begin_inset Note Note
+status collapsed
-\layout Standard
+\begin_layout Standard
The screenshot was converted from png to eps with:
\begin_inset Quotes sld
\end_inset
which produces a pretty compact eps file which is free from compression
artifacts.
+\end_layout
-\layout Standard
+\begin_layout Standard
The screenshot was included in sdccman.lyx cvs version 1.120 but later removed
as this broke the build system on Sourceforge (pdf-file was broken.
pdflatex does not accept eps files).
+\end_layout
\end_inset
+\end_layout
-\layout Standard
+\begin_layout Standard
The
\emph on
p
raphics File
\size footnotesize
-\begin_inset LatexCommand \url{http://svn.sourceforge.net/viewcvs.cgi/*checkout*/sdcc/trunk/sdcc/doc/figures/ddd_example.png}
+\begin_inset LatexCommand \url{http://sdcc.svn.sourceforge.net/viewvc/*checkout*/sdcc/trunk/sdcc/doc/figures/ddd_example.png}
\end_inset
\series default
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
\newline
ddd -debugger "sdcdb -cpu 8032 ddd_example"
+\end_layout
-\layout Standard
-\begin_inset Note
-collapsed false
+\begin_layout Standard
+\begin_inset Note Note
+status open
-\layout Standard
+\begin_layout Standard
Check that the double quotes or an apostroph within the command line survive
the LyX tool chain.
Previously the apostrophs got slanted in the PDF output so a cut and paste
did not work.
+\end_layout
\end_inset
+\end_layout
-\layout Subsection
+\begin_layout Subsection
Interfacing SDCDB with XEmacs
\begin_inset LatexCommand \index{XEmacs}
\end_inset
+\end_layout
-\layout Standard
+\begin_layout Standard
Two files (in emacs lisp) are provided for the interfacing with XEmacs,
sdcdb.el and sdcdbsrc.el.
These two files can be found in the $(prefix)/bin directory after the installat
The command line options that are passed to the simulator directly are
bound to default values in the file sdcdbsrc.el.
The variables are listed below, these values maybe changed as required.
+\end_layout
-\layout Itemize
+\begin_layout Itemize
sdcdbsrc-cpu-type '51
+\end_layout
-\layout Itemize
+\begin_layout Itemize
sdcdbsrc-frequency '11059200
+\end_layout
-\layout Itemize
+\begin_layout Itemize
sdcdbsrc-serial nil
+\end_layout
-\layout Standard
+\begin_layout Standard
The following is a list of key mapping for the debugger interface.
+\end_layout
-\layout Standard
-\SpecialChar ~
-\pagebreak_bottom
+\begin_layout Standard
+\InsetSpace ~
\family typewriter
\newline
-;;\SpecialChar ~
+;;\InsetSpace ~
Current Listing ::
\newline
-;;key\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-binding\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+;;key\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+binding\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
Comment
\newline
-;;---\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
--------\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+;;---\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+-------\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
-------
\newline
;;
\newline
-;;\SpecialChar ~
-n\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+;;\InsetSpace ~
+n\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
sdcdb-next-fro
-m-src\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+m-src\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
SDCDB next command
\newline
-;;\SpecialChar ~
-b\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-sdcdb-back-from-src\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+;;\InsetSpace ~
+b\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+sdcdb-back-from-src\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
SDCDB back command
\newline
-;;\SpecialChar ~
-c\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+;;\InsetSpace ~
+c\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
sdcdb-cont-f
-rom-src\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+rom-src\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
SDCDB continue command
\newline
-;;\SpecialChar ~
-s\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-sdcdb-step-from-src\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+;;\InsetSpace ~
+s\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+sdcdb-step-from-src\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
SDCDB step command
\newline
-;;\SpecialChar ~
-?\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+;;\InsetSpace ~
+?\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
sdcdb-w
-hatis-c-sexp\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+hatis-c-sexp\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
SDCDB ptypecommand for data at
\newline
-;;\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+;;\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
buffer point
\newline
-;;\SpecialChar ~
-x\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-sdcdbsrc-delete\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+;;\InsetSpace ~
+x\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+sdcdbsrc-delete\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
SDCD
B Delete all breakpoints if no arg
\newline
-;;\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+;;\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
given or delete arg (C-u arg x)
\newline
-;;\SpecialChar ~
-m\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+;;\InsetSpace ~
+m\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
sdcdbsrc
--frame\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+-frame\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
SDCDB Display current frame if no arg,
\newline
-;;\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+;;\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
given or display frame arg
\newline
-;;\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+;;\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
buffer point
\newline
-;;\SpecialChar ~
-!\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-sdcdbsrc-goto-sdcdb\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+;;\InsetSpace ~
+!\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+sdcdbsrc-goto-sdcdb\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
Goto the SDCDB output buffer
\newline
-;;\SpecialChar ~
-p\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+;;\InsetSpace ~
+p\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
sdcdb-prin
-t-c-sexp\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+t-c-sexp\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
SDCDB print command for data at
\newline
-;;\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+;;\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
buffer point
\newline
-;;\SpecialChar ~
-g\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-sdcdbsrc-goto-sdcdb\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+;;\InsetSpace ~
+g\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+sdcdbsrc-goto-sdcdb\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
Got
o the SDCDB output buffer
\newline
-;;\SpecialChar ~
-t\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-sdcdbsrc-mode\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+;;\InsetSpace ~
+t\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+sdcdbsrc-mode\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
Toggles Sdcdbsrc mode (turns it
off)
\newline
;;
\newline
-;;\SpecialChar ~
-C-c\SpecialChar ~
-C-f\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-sdcdb-finish-from-src\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+;;\InsetSpace ~
+C-c\InsetSpace ~
+C-f\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+sdcdb-finish-from-src\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
SDCDB finish command
\newline
;;
\newline
-;;\SpecialChar ~
-C-x\SpecialChar ~
-SPC\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+;;\InsetSpace ~
+C-x\InsetSpace ~
+SPC\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
sdcdb-brea
-k\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+k\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
Set break for line with point
\newline
-;;\SpecialChar ~
-ESC\SpecialChar ~
-t\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-sdcdbsrc-mode\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+;;\InsetSpace ~
+ESC\InsetSpace ~
+t\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+sdcdbsrc-mode\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
Toggle Sdcdbsrc mode
\newline
-;;\SpecialChar ~
-ESC\SpecialChar ~
-m\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+;;\InsetSpace ~
+ESC\InsetSpace ~
+m\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
sdc
-dbsrc-srcmode\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+dbsrc-srcmode\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
Toggle list mode
\newline
;;
\newline
+\family default
+
+\newpage
+\end_layout
-\layout Chapter
+\begin_layout Chapter
TIPS
+\end_layout
-\layout Standard
+\begin_layout Standard
Here are a few guidelines that will help the compiler generate more efficient
code, some of the tips are specific to this compiler others are generally
good programming practice.
+\end_layout
-\layout Itemize
+\begin_layout Itemize
Use the smallest data type to represent your data-value.
If it is known in advance that the value is going to be less than 256 then
use an 'unsigned char' instead of a 'short' or 'int'.
\begin_inset Marginal
-collapsed true
+status collapsed
-\layout Standard
+\begin_layout Standard
\series bold
-\SpecialChar ~
+\InsetSpace ~
!
+\end_layout
\end_inset
can be omitted, if the result is the same.
The effect of the promotion rules together with the sign-extension is often
surprising:
+\end_layout
\begin_deeper
-\layout Verse
+\begin_layout Verse
\family typewriter
unsigned char uc = 0xfe;
\newline
{
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
....
\newline
}
+\end_layout
-\layout Standard
+\begin_layout Standard
\family typewriter
uc * uc
\newline
Another one:
+\end_layout
-\layout Verse
+\begin_layout Verse
\family typewriter
(unsigned char) -12 / (signed char) -3 = ...
+\end_layout
-\layout Standard
+\begin_layout Standard
No, the result is not 4:
+\end_layout
-\layout Verse
+\begin_layout Verse
\family typewriter
(int) (unsigned char) -12 / (int) (signed char) -3 =
(int) 244 / (int) -3 =
\newline
(int) -81 = (int) 0xffaf;
+\end_layout
-\layout Standard
+\begin_layout Standard
Don't complain, that gcc gives you a different result.
gcc uses 32 bit ints, while SDCC uses 16 bit ints.
Therefore the results are different.
\end_inset
:
+\end_layout
-\layout Quote
+\begin_layout Quote
\emph on
If well-defined overflow characteristics are important and negative values
character types (especially unsigned char) can be used as "tiny" integers,
doing so is sometimes more trouble than it's worth, due to unpredictable
sign extension and increased code size.
+\end_layout
\end_deeper
-\layout Itemize
+\begin_layout Itemize
Use unsigned when it is known in advance that the value is not going to
be negative.
This helps especially if you are doing division or multiplication, bit-shifting
or are using an array index.
+\end_layout
-\layout Itemize
+\begin_layout Itemize
NEVER jump into a LOOP.
+\end_layout
-\layout Itemize
+\begin_layout Itemize
Declare the variables to be local
\begin_inset LatexCommand \index{local variables}
\end_inset
whenever possible, especially loop control variables (induction).
+\end_layout
-\layout Itemize
+\begin_layout Itemize
Have a look at the assembly listing to get a
\begin_inset Quotes sld
\end_inset
\end_inset
for the code generation.
+\end_layout
-\layout Section
+\begin_layout Section
Porting code from or to other compilers
\begin_inset LatexCommand \label{sec:Porting-code-to-other-compilers}
\end_inset
+\end_layout
-\layout Itemize
+\begin_layout Itemize
check whether endianness of the compilers differs and adapt where needed.
+\end_layout
-\layout Itemize
+\begin_layout Itemize
check the device specific header files
\begin_inset LatexCommand \index{Header files}
\end_inset
>
-\begin_inset LatexCommand \url{http://svn.sourceforge.net/viewvc/sdcc/trunk/sdcc/device/include/mcs51/compiler.h?view=markup}
+\begin_inset LatexCommand \url{http://sdcc.svn.sourceforge.net/viewvc/sdcc/trunk/sdcc/device/include/mcs51/compiler.h?view=markup}
\end_inset
to allow using common header files.
(see f.e.
cc2510fx.h
-\begin_inset LatexCommand \url{http://svn.sourceforge.net/viewvc/sdcc/trunk/sdcc/device/include/mcs51/cc2510fx.h?view=markup}
+\begin_inset LatexCommand \url{http://sdcc.svn.sourceforge.net/viewvc/sdcc/trunk/sdcc/device/include/mcs51/cc2510fx.h?view=markup}
\end_inset
).
+\end_layout
-\layout Itemize
+\begin_layout Itemize
check whether the startup code contains the correct initialization (watchdog,
peripherals).
+\end_layout
-\layout Itemize
+\begin_layout Itemize
check whether the sizes of short, int, long match.
+\end_layout
-\layout Itemize
+\begin_layout Itemize
check if some 16 or 32 bit hardware registers require a specific addressing
order (least significant or most significant byte first) and adapt if needed
(
not
\emph default
the same as endianness).
+\end_layout
-\layout Itemize
+\begin_layout Itemize
check whether the keyword
\emph on
volatile
\end_inset
.
+\end_layout
-\layout Itemize
+\begin_layout Itemize
check that the compilers are not told to supress warnings.
+\end_layout
-\layout Itemize
+\begin_layout Itemize
check and convert compiler specific extensions (interrupts, memory areas,
pragmas etc.).
+\end_layout
-\layout Itemize
+\begin_layout Itemize
check for differences in type promotion.
Especially check for math operations on
\family typewriter
(unsigned char)
\family default
.
- Also check that the ~\SpecialChar ~
+ Also check that the ~\InsetSpace ~
operator
\begin_inset LatexCommand \index{\~\/ Operator}
\family default
- variables, use the !\SpecialChar ~
+ variables, use the !\InsetSpace ~
operator instead.
See sections
\begin_inset LatexCommand \ref{type promotion}
\end_inset
.
+\end_layout
-\layout Itemize
+\begin_layout Itemize
check the assembly code generated for interrupt routines (f.e.
for calls to possibly non-reentrant library functions).
+\end_layout
-\layout Itemize
+\begin_layout Itemize
check whether timing loops result in proper timing (or preferably consider
a rewrite of the code with timer based delays instead).
+\end_layout
-\layout Itemize
+\begin_layout Itemize
check for differences in printf parameters (some compilers push (va_arg
\begin_inset LatexCommand \index{vararg, va\_arg}
\end_inset
).
+\end_layout
-\layout Itemize
+\begin_layout Itemize
check the resulting memory map
\begin_inset LatexCommand \index{Memory map}
Usage of different memory spaces: code, stack, data (for mcs51/ds390 additional
ly idata, pdata, xdata).
Eventually check if unexpected library functions are included.
+\end_layout
-\layout Section
+\begin_layout Section
Tools
\begin_inset LatexCommand \index{Tools}
\end_inset
included in the distribution
+\end_layout
-\layout Standard
+\begin_layout Standard
\align left
\begin_inset Tabular
<lyxtabular version="3" rows="12" columns="3">
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\series bold
Name
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\series bold
Purpose
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\series bold
Directory
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
uCsim
\begin_inset LatexCommand \index{uCsim}
\end_inset
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
Simulator for various architectures
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
sdcc/sim/ucsim
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
keil2sdcc.pl
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
header file
\begin_inset LatexCommand \index{Header files}
\end_inset
conversion
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
sdcc/support/scripts
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
mh2h.c
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
header file conversion
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
sdcc/support/scripts
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
as-gbz80
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
Assembler
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\family roman
\series medium
\noun off
\color none
sdcc/bin
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
as-z80
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
Assembler
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\family roman
\series medium
\noun off
\color none
sdcc/bin
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
asx8051
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
Assembler
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\family roman
\series medium
\noun off
\color none
sdcc/bin
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
SDCDB
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
Simulator
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\family roman
\series medium
\noun off
\color none
sdcc/bin
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
aslink
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
Linker
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\family roman
\series medium
\noun off
\color none
sdcc/bin
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
link-z80
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
Linker
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\family roman
\series medium
\noun off
\color none
sdcc/bin
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
link-gbz80
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
Linker
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\family roman
\series medium
\noun off
\color none
sdcc/bin
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
packihx
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
Intel Hex packer
\begin_inset LatexCommand \index{packihx (tool)}
\end_inset
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\family roman
\series medium
\noun off
\color none
sdcc/bin
+\end_layout
\end_inset
</cell>
\newline
+\end_layout
-\layout Section
+\begin_layout Section
Documentation
\begin_inset LatexCommand \index{Documentation}
\end_inset
included in the distribution
+\end_layout
-\layout Standard
+\begin_layout Standard
\align left
\begin_inset Tabular
<lyxtabular version="3" rows="10" columns="2">
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\series bold
Subject / Title
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\series bold
Filename / Where to get
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
SDCC Compiler User Guide
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
You're reading it right now
\emph on
- \SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+ \InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
\hfill
online at:
\end_inset
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
Changelog of SDCC
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
sdcc/Changelog
\emph on
- \SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+ \InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
\hfill
online at:
\newline
-\begin_inset LatexCommand \url{http://svn.sourceforge.net/viewvc/*checkout*/sdcc/trunk/sdcc/ChangeLog}
+\begin_inset LatexCommand \url{http://sdcc.svn.sourceforge.net/viewvc/*checkout*/sdcc/trunk/sdcc/ChangeLog}
\end_inset
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
ASXXXX
\begin_inset LatexCommand \index{asXXXX (as-gbz80, as-hc08, asx8051, as-z80)}
\end_inset
Relocating Linker
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
sdcc/as/doc/asxhtm.html
\emph on
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
\hfill
online at:
\newline
-\begin_inset LatexCommand \url{http://svn.sourceforge.net/viewvc/*checkout*/sdcc/trunk/sdcc/as/doc/asxhtm.html}
+\begin_inset LatexCommand \url{http://sdcc.svn.sourceforge.net/viewvc/*checkout*/sdcc/trunk/sdcc/as/doc/asxhtm.html}
\end_inset
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
SDCC regression test
\begin_inset LatexCommand \index{Regression test}
\end_inset
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
sdcc/doc/test_suite_spec.pdf
\emph on
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
\hfill
online at:
\end_inset
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
Various notes
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
sdcc/doc/*
\emph on
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
\hfill
online at:
\newline
-\begin_inset LatexCommand \url{http://svn.sourceforge.net/viewvc/sdcc/trunk/sdcc/doc/}
+\begin_inset LatexCommand \url{http://sdcc.svn.sourceforge.net/viewvc/sdcc/trunk/sdcc/doc/}
\end_inset
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
Notes on debugging with SDCDB
\begin_inset LatexCommand \index{SDCDB (debugger)}
\end_inset
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
sdcc/debugger/README
\emph on
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
\hfill
online at
:
\newline
-\begin_inset LatexCommand \url{http://svn.sourceforge.net/viewvc/*checkout*/sdcc/trunk/sdcc/debugger/README}
+\begin_inset LatexCommand \url{http://sdcc.svn.sourceforge.net/viewvc/*checkout*/sdcc/trunk/sdcc/debugger/README}
\end_inset
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
uCsim
\begin_inset LatexCommand \index{uCsim}
\end_inset
Software simulator for microcontrollers
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\family roman
\series medium
\noun default
/index.html
\emph on
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
\hfill
online at:
\newline
-\begin_inset LatexCommand \url{http://svn.sourceforge.net/viewvc/*checkout*/sdcc/trunk/sdcc/sim/ucsim/doc/index.html}
+\begin_inset LatexCommand \url{http://sdcc.svn.sourceforge.net/viewvc/*checkout*/sdcc/trunk/sdcc/sim/ucsim/doc/index.html}
\end_inset
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
Temporary notes on the pic16
\begin_inset LatexCommand \index{PIC16}
\end_inset
port
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
sdcc/src/pic16/NOTES
\emph on
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
\hfill
online at:
\emph default
-\begin_inset LatexCommand \url{http://svn.sourceforge.net/viewvc/*checkout*/sdcc/trunk/sdcc/src/pic16/NOTES}
+\begin_inset LatexCommand \url{http://sdcc.svn.sourceforge.net/viewvc/*checkout*/sdcc/trunk/sdcc/src/pic16/NOTES}
\end_inset
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
SDCC internal documentation (debugging file format)
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
sdcc/doc/
\family roman
\series medium
\noun default
f
\emph on
- \SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+ \InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
\hfill
online at:
\end_inset
+\end_layout
\end_inset
</cell>
\newline
+\end_layout
-\layout Section
+\begin_layout Section
Related open source tools
\begin_inset LatexCommand \label{sec:Related-open-source-tools}
\end_inset
+\end_layout
-\layout Standard
+\begin_layout Standard
\align left
\begin_inset Tabular
-<lyxtabular version="3" rows="14" columns="3">
+<lyxtabular version="3" rows="16" columns="3">
<features>
<column alignment="left" valignment="top" leftline="true" width="0pt">
<column alignment="block" valignment="top" leftline="true" width="30line%">
-<column alignment="left" valignment="top" leftline="true" rightline="true" width="0pt">
+<column alignment="left" valignment="top" leftline="true" rightline="true" width="40col%">
<row topline="true" bottomline="true">
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\series bold
Name
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\series bold
Purpose
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\series bold
Where to get
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
gpsim
\begin_inset LatexCommand \index{gpsim (pic simulator)}
\end_inset
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
PIC simulator
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\begin_inset LatexCommand \url{http://www.dattalo.com/gnupic/gpsim.html}
\end_inset
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
gputils
\begin_inset LatexCommand \index{gputils (pic tools)}
\end_inset
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
GNU PIC utilities
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\begin_inset LatexCommand \url{http://sourceforge.net/projects/gputils}
\end_inset
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
flP5
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
PIC programmer
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\begin_inset LatexCommand \url{http://freshmeat.net/projects/flp5/}
\end_inset
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
ec2drv/newcdb
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
Tools for Silicon Laboratories JTAG debug adapter, partly based on SDCDB
(Unix only)
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\begin_inset LatexCommand \url{http://sourceforge.net/projects/ec2drv}
\end_inset
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
indent
\begin_inset LatexCommand \index{indent (source formatting tool)}
\end_inset
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
Formats C source - Master of the white spaces
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\begin_inset LatexCommand \url{http://directory.fsf.org/GNU/indent.html}
\end_inset
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
srecord
\begin_inset LatexCommand \index{srecord (bin, hex, ... tool)}
\end_inset
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
Object file conversion, checksumming, ...
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\begin_inset LatexCommand \url{http://sourceforge.net/projects/srecord}
\end_inset
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
objdump
\begin_inset LatexCommand \index{objdump (tool)}
\end_inset
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
Object file conversion, ...
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
Part of binutils (should be there anyway)
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
cmon51
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
8051 monitor (hex up-/download, single step, disassemble)
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\begin_inset LatexCommand \url{http://sourceforge.net/projects/cmon51}
\end_inset
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
doxygen
\begin_inset LatexCommand \index{doxygen (source documentation tool)}
\end_inset
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
Source code documentation system
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\begin_inset LatexCommand \url{http://www.doxygen.org}
\end_inset
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
kdevelop
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
IDE (has anyone tried integrating SDCC & SDCDB? Unix only)
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\begin_inset LatexCommand \url{http://www.kdevelop.org}
\end_inset
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
paulmon
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
8051 monitor (hex up-/download, single step, disassemble)
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\begin_inset LatexCommand \url{http://www.pjrc.com/tech/8051/paulmon2.html}
\end_inset
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
splint
\begin_inset LatexCommand \index{splint (syntax checking tool)}
\end_inset
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
Statically checks c sources (see
\begin_inset LatexCommand \ref{lyx:more-pedantic-SPLINT}
\end_inset
)
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\begin_inset LatexCommand \url{http://www.splint.org}
\end_inset
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
ddd
\begin_inset LatexCommand \index{DDD (debugger)}
\end_inset
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
Debugger, serves nicely as GUI to SDCDB
\begin_inset LatexCommand \index{SDCDB (debugger)}
\end_inset
(Unix only)
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\begin_inset LatexCommand \url{http://www.gnu.org/software/ddd/}
\end_inset
+\end_layout
+
+\end_inset
+</cell>
+</row>
+<row bottomline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Standard
+d52
+\begin_inset LatexCommand \index{d52}
+
+\end_inset
+
+
+\begin_inset LatexCommand \index{d52 (disassembler)}
+
+\end_inset
+
+
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Standard
+Disassembler, can count instruction cycles
+\begin_inset LatexCommand \index{instruction cycles (count)}
+
+\end_inset
+
+, use with options -pnd
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Standard
+\begin_inset LatexCommand \url{http://www.8052.com/users/disasm/}
+
+\end_inset
+
+
+\end_layout
+
+\end_inset
+</cell>
+</row>
+<row bottomline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Standard
+cmake
+\begin_inset LatexCommand \index{cmake}
+
+\end_inset
+
+
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Standard
+Cross platform build system, generates Makefiles
+\begin_inset LatexCommand \index{Makefile}
+
+\end_inset
+
+ and project workspaces
+\begin_inset LatexCommand \index{project workspace}
+
+\end_inset
+
+
+\end_layout
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\begin_layout Standard
+\begin_inset LatexCommand \url{http://www.cmake.org}
+
+\end_inset
+
+ \InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+and a dedicated wiki entry:
+\begin_inset LatexCommand \url{http://www.cmake.org/Wiki/CmakeSdcc}
+
+\end_inset
+
+
+\end_layout
\end_inset
</cell>
\newline
+\end_layout
-\layout Section
+\begin_layout Section
Related documentation / recommended reading
+\end_layout
-\layout Standard
+\begin_layout Standard
\align left
\begin_inset Tabular
<lyxtabular version="3" rows="7" columns="3">
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\series bold
Name
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\series bold
Subject / Title
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\series bold
Where to get
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\family roman
\series medium
\noun off
\color none
c-refcard.pdf
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
C Reference Card
\begin_inset LatexCommand \index{C Reference card}
\end_inset
, 2 pages
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\begin_inset LatexCommand \url{http://refcards.com/refcards/c/index.html}
\end_inset
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
c-faq
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
C-FAQ
\begin_inset LatexCommand \index{C FAQ}
\end_inset
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\begin_inset LatexCommand \url{http://www.c-faq.com}
\end_inset
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
ISO/IEC 9899:TC2
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\begin_inset Quotes sld
\end_inset
\end_inset
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
\begin_inset LatexCommand \url{http://www.open-std.org/jtc1/sc22/wg14/www/standards.html#9899}
\end_inset
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
ISO/IEC DTR 18037
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\begin_inset Quotes sld
\end_inset
\end_inset
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
\begin_inset LatexCommand \url{http://www.open-std.org/jtc1/sc22/wg14/www/docs/n1021.pdf}
\end_inset
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
Latest datasheet of target CPU
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
vendor
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
Revision history of datasheet
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
vendor
+\end_layout
\end_inset
</cell>
\newline
+\end_layout
-\layout Section
+\begin_layout Section
Application notes specifically for SDCC
+\end_layout
-\layout Standard
+\begin_layout Standard
SDCC makes no claims about the completeness of this list and about up-to-datenes
s or correctness of the application notes
\begin_inset LatexCommand \index{Application notes}
\end_inset
.
+\end_layout
-\layout Standard
+\begin_layout Standard
\align left
\size footnotesize
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\series bold
\size footnotesize
Vendor
+\end_layout
\end_inset
</cell>
<cell alignment="left" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\series bold
\size footnotesize
Subject / Title
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\series bold
\size footnotesize
Where to get
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
Maxim / Dallas
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
Using the SDCC Compiler for the DS80C400
\end_inset
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
\begin_inset LatexCommand \url{http://pdfserv.maxim-ic.com/en/an/AN3346.pdf}
\end_inset
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
Maxim / Dallas
+\end_layout
\end_inset
</cell>
<cell multicolumn="1" alignment="left" valignment="top" topline="true" leftline="true" usebox="none" width="30line%">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
Using the Free SDCC C Compiler to Develop Firmware for the DS89C420/430/440/450
\end_inset
Family of Microcontrollers
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
\begin_inset LatexCommand \url{http://pdfserv.maxim-ic.com/en/an/AN3477.pdf}
\end_inset
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
Silicon Laboratories / Cygnal
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
Integrating SDCC 8051 Tools Into The Silicon Labs IDE
\end_inset
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
\begin_inset LatexCommand \url{http://www.silabs.com/public/documents/tpub_doc/anote/Microcontrollers/en/an198.pdf}
\end_inset
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
Ramtron / Goal Semiconductor
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
Interfacing SDCC to Syn and Textpad
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
\begin_inset LatexCommand \url{http://www.ramtron.com/doc/Products/Microcontroller/Support_Tools.asp}
\end_inset
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
Ramtron / Goal Semiconductor
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
Installing and Configuring SDCC and Crimson Editor
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
\begin_inset LatexCommand \url{http://www.ramtron.com/doc/Products/Microcontroller/Support_Tools.asp}
\end_inset
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
Texas Instruments
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
MSC12xx Programming with SDCC
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
\begin_inset LatexCommand \url{http://focus.ti.com/general/docs/lit/getliterature.tsp?literatureNumber=sbaa109&fileType=pdf}
\end_inset
+\end_layout
\end_inset
</cell>
\end_inset
+\end_layout
-\layout Section
+\begin_layout Section
Some Questions
+\end_layout
-\layout Standard
+\begin_layout Standard
Some questions answered, some pointers given - it might be time to in turn
ask
\emph on
you
\emph default
some questions:
+\end_layout
-\layout Itemize
+\begin_layout Itemize
can you solve your project with the selected microcontroller? Would you
find out early or rather late that your target is too small/slow/whatever?
Can you switch to a slightly better device if it doesn't fit?
+\end_layout
-\layout Itemize
+\begin_layout Itemize
should you solve the problem with an 8 bit CPU? Or would a 16/32 bit CPU
and/or another programming language be more adequate? Would an operating
system on the target device help?
+\end_layout
-\layout Itemize
+\begin_layout Itemize
if you solved the problem, will the marketing department be happy?
+\end_layout
-\layout Itemize
+\begin_layout Itemize
if the marketing department is happy, will customers be happy?
+\end_layout
-\layout Itemize
+\begin_layout Itemize
if you're the project manager, marketing department and maybe even the customer
in one person, have you tried to see the project from the outside?
+\end_layout
-\layout Itemize
+\begin_layout Itemize
is the project done if you think it is done? Or is just that other interface/pro
tocol/feature/configuration/option missing? How about website, manual(s),
internationali(z|s)ation, packaging, labels, 2nd source for components,
electromagnetic compatability/interference, documentation for production,
production test software, update mechanism, patent issues?
+\end_layout
-\layout Itemize
+\begin_layout Itemize
is your project adequately positioned in that magic triangle: fame, fortune,
fun?
+\end_layout
-\layout Standard
+\begin_layout Standard
Maybe not all answers to these questions are known and some answers may
even be
\emph on
\emph default
, nevertheless knowing these questions may help you to avoid burnout
\begin_inset Foot
-collapsed false
+status open
-\layout Standard
+\begin_layout Standard
burnout is bad for electronic devices, programmers and motorcycle tyres
+\end_layout
\end_inset
.
Chances are you didn't want to hear some of them...
+\end_layout
-\layout Chapter
+\begin_layout Chapter
Support
\begin_inset LatexCommand \index{Support}
\end_inset
+\end_layout
-\layout Standard
+\begin_layout Standard
SDCC has grown to be a large project.
The compiler alone (without the preprocessor, assembler and linker) is
well over 150,000 lines of code (blank stripped).
There are lots of ways to contribute, and we encourage you to take part
in making SDCC a great software package.
+\end_layout
-\layout Standard
+\begin_layout Standard
The SDCC project is hosted on the SDCC sourceforge site at
\begin_inset LatexCommand \htmlurl{http://sourceforge.net/projects/sdcc}
\end_inset
there.
+\end_layout
-\layout Section
+\begin_layout Section
Reporting Bugs
\begin_inset LatexCommand \index{Bug reporting}
\end_inset
+\end_layout
-\layout Standard
+\begin_layout Standard
The recommended way of reporting bugs is using the infrastructure of the
sourceforge site.
You can follow the status of bug reports there and have an overview about
the known bugs.
+\end_layout
-\layout Standard
+\begin_layout Standard
Bug reports are automatically forwarded to the developer mailing list and
will be fixed ASAP.
When reporting a bug, it is very useful to include a small test program
this can be very helpful.
Compiling your program with the -
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
option can sometimes be useful in locating optimization problems.
When reporting a bug please make sure you:
+\end_layout
-\layout Enumerate
+\begin_layout Enumerate
Attach the code you are compiling with SDCC.
+\end_layout
-\layout Enumerate
+\begin_layout Enumerate
Specify the exact command you use to run SDCC, or attach your Makefile.
+\end_layout
-\layout Enumerate
+\begin_layout Enumerate
Specify the SDCC version (type "
\family sans
\series bold
\series default
"), your platform, and operating system.
+\end_layout
-\layout Enumerate
+\begin_layout Enumerate
Provide an exact copy of any error message or incorrect output.
+\end_layout
-\layout Enumerate
+\begin_layout Enumerate
Put something meaningful in the subject of your message.
+\end_layout
-\layout Standard
+\begin_layout Standard
Please attempt to include these 5 important parts, as applicable, in all
requests for support or when reporting any problems or bugs with SDCC.
Though this will make your message lengthy, it will greatly improve your
Some SDCC developers are frustrated by bug reports without code provided
that they can use to reproduce and ultimately fix the problem, so please
be sure to provide sample code if you are reporting a bug!
+\end_layout
-\layout Standard
+\begin_layout Standard
Please have a short check that you are using a recent version of SDCC and
the bug is not yet known.
This is the link for reporting bugs:
on sourceforge per day
\begin_inset Foot
-collapsed false
+status open
-\layout Standard
+\begin_layout Standard
220 daily downloads on average Jan-Sept 2006 and about 150 daily downloads
between 2002 and 2005.
This does not include other methods of distribution.
+\end_layout
\end_inset
reporting bugs is good
\emph default
.
+\end_layout
-\layout Section
+\begin_layout Section
Requesting Features
\begin_inset LatexCommand \label{sub:Requesting-Features}
\end_inset
+\end_layout
-\layout Standard
+\begin_layout Standard
Like bug reports feature requests are forwarded to the developer mailing
list.
This is the link for requesting features:
\end_inset
.
+\end_layout
-\layout Section
+\begin_layout Section
Submitting patches
+\end_layout
-\layout Standard
+\begin_layout Standard
Like bug reports contributed patches are forwarded to the developer mailing
list.
This is the link for submitting patches
\end_inset
.
+\end_layout
-\layout Standard
+\begin_layout Standard
You need to specify some parameters to the
\family typewriter
diff
\family default
will do.
+\end_layout
-\layout Section
+\begin_layout Section
Getting Help
+\end_layout
-\layout Standard
+\begin_layout Standard
These links should take you directly to the
\begin_inset LatexCommand \url[Mailing lists]{http://sourceforge.net/mail/?group_id=599}
\begin_inset Foot
-collapsed false
+status open
-\layout Standard
+\begin_layout Standard
Traffic on sdcc-devel and sdcc-user is about 100 mails/month each not counting
automated messages (mid 2003)
+\end_layout
\end_inset
While mails to the lists themselves are delivered promptly their web front
end on sourceforge sometimes shows a severe time lag (up to several weeks),
if you're seriously using SDCC please consider subscribing to the lists.
+\end_layout
-\layout Section
+\begin_layout Section
ChangeLog
+\end_layout
-\layout Standard
+\begin_layout Standard
You can follow the status of the Subversion version
\begin_inset LatexCommand \index{version}
in the Subversion repository
\size footnotesize
-\begin_inset LatexCommand \htmlurl{http://svn.sourceforge.net/viewcvs.cgi/*checkout*/sdcc/trunk/sdcc/ChangeLog}
+\begin_inset LatexCommand \htmlurl{http://sdcc.svn.sourceforge.net/viewcvs.cgi/*checkout*/sdcc/trunk/sdcc/ChangeLog}
\end_inset
.
+\end_layout
-\layout Section
+\begin_layout Section
Subversion Source Code Repository
+\end_layout
-\layout Standard
+\begin_layout Standard
The output of
\family sans
\series bold
-sdcc --version
+sdcc -
+\family default
+
+\begin_inset ERT
+status open
+
+\begin_layout Standard
+
+
+\backslash
+/
+\end_layout
+
+\end_inset
+
+
+\family sans
+-version
\family default
\series default
or the filenames of the snapshot versions of SDCC include date and its
to Subversion (April 2006) are either by accessible by Subversion or by
cvs).
+\end_layout
-\layout Section
+\begin_layout Section
Release policy
\begin_inset LatexCommand \index{Release policy}
\end_inset
+\end_layout
-\layout Standard
+\begin_layout Standard
Historically there often were long delays between official releases and
the sourceforge download area tends to get not updated at all.
Excuses in the past might have referred to problems with live range analysis,
\end_inset
.
- A release wiki
+ The SDCC Wiki
\begin_inset LatexCommand \index{wiki}
\end_inset
-\begin_inset LatexCommand \index{Release wiki}
+\begin_inset LatexCommand \index{SDCC Wiki}
\end_inset
at
-\begin_inset LatexCommand \url{http://sdcc.sf.net/release_wiki/}
+\begin_inset LatexCommand \url{http://sdcc.wiki.sourceforge.net/}
\end_inset
also holds some information about past and future releases.
+\end_layout
-\layout Section
+\begin_layout Section
Examples
\begin_inset LatexCommand \index{Examples}
\end_inset
+\end_layout
-\layout Standard
+\begin_layout Standard
You'll find some small examples in the directory
\emph on
sdcc/device/examples/.
\end_inset
.
+\end_layout
-\layout Standard
-\begin_inset Note
-collapsed true
+\begin_layout Standard
+\begin_inset Note Note
+status collapsed
-\layout Standard
+\begin_layout Standard
I did insert a reference to Paul's web site here although it seems rather
dedicated to a specific 8032 board (I think it's okay because it f.e.
shows LCD/Harddisc interface and has a free 8051 monitor.
Independent 8032 board vendors face hard competition of heavily subsidized
development boards anyway).
+\end_layout
-\layout Standard
+\begin_layout Standard
Maybe we should include some links to real world applications.
Preferably pointer to pointers (one for each architecture) so this stays
manageable here?
+\end_layout
\end_inset
+\end_layout
-\layout Section
+\begin_layout Section
Quality control
\begin_inset LatexCommand \label{sec:Quality-control}
\end_inset
+\end_layout
-\layout Standard
-The compiler is passed through nightly compile and build checks.
+\begin_layout Standard
+The compiler is passed through snaphot build compile and build checks.
The so called
\shape italic
regression tests
\end_inset
check that SDCC itself compiles flawlessly on several host platforms (i386,
- Opteron, 64 bit Alpha, ppc64, MacOS X on PPC, Solaris on Sparc) and checks
- the quality of the code generated by SDCC by running the code for several
- target platforms through simulators.
+ Opteron, 64 bit Alpha, ppc64, Mac OS X on ppc and i386, Solaris on Sparc)
+ and checks the quality of the code generated by SDCC by running the code
+ for several target platforms through simulators.
The regression test suite comprises more than 100 files which expand to
more than 500 test cases which include more than 4500 tests.
The results of these tests are published daily on SDCC's snapshot page
\end_inset
).
+\end_layout
-\layout Standard
+\begin_layout Standard
There is a separate document
\shape italic
test_suite.pdf
\end_inset
about the regression test suite.
+\end_layout
-\layout Standard
+\begin_layout Standard
You'll find the test code in the directory
\shape italic
sdcc/support/regression
\end_inset
.
+\end_layout
-\layout Standard
-The 14bit pic port uses a different set of regression tests
+\begin_layout Standard
+The PIC14 port uses a different set of regression tests
\begin_inset LatexCommand \index{Regression test (PIC14)}
\end_inset
sdcc/src/regression
\shape default
.
+\end_layout
-\layout Section
+\begin_layout Section
Use of SDCC in Education
+\end_layout
-\layout Standard
+\begin_layout Standard
In short:
\emph on
highly
\emph default
encouraged
\begin_inset Foot
-collapsed false
+status open
-\layout Standard
+\begin_layout Standard
the phrase "use in education" might evoke the association "
\emph on
only
fit for use in education".
This connotation is not intended but nevertheless risked as the licensing
of SDCC makes it difficult to offer educational discounts
+\end_layout
\end_inset
.
If your rationales are to:
+\end_layout
-\layout Enumerate
+\begin_layout Enumerate
give students a chance to understand the
\emph on
complete
\emph default
steps of code generation
+\end_layout
-\layout Enumerate
+\begin_layout Enumerate
have a curriculum that can be extended for years.
Then you could use an fpga board as target and your curriculum will seamlessly
extend from logic synthesis (
\end_inset
) and to C.
+\end_layout
-\layout Enumerate
+\begin_layout Enumerate
be able to insert excursions about skills like using a revision control
system, submitting/applying patches, using a type-setting (as opposed to
word-processing) engine LyX/LaTeX, using
\end_inset
.
+\end_layout
-\layout Enumerate
+\begin_layout Enumerate
not tie students to a specific host platform and instead allow them to use
a host platform of
\emph on
their
\emph default
- choice (among them Alpha, i386, i386_64, MacOs, Mips, Sparc, Windows and
- eventually
+ choice (among them Alpha, i386, i386_64, Mac OS X, Mips, Sparc, Windows
+ and eventually
\begin_inset LatexCommand \url[OLPC]{http://www.laptop.org}
\end_inset
)
+\end_layout
-\layout Enumerate
+\begin_layout Enumerate
not encourage students to use illegal copies of educational software
+\end_layout
-\layout Enumerate
+\begin_layout Enumerate
be immune to licensing/availability/price changes of the chosen tool chain
+\end_layout
-\layout Enumerate
+\begin_layout Enumerate
be able to change to a new target platform without having to adopt a new
tool chain
+\end_layout
-\layout Enumerate
+\begin_layout Enumerate
have complete control over and insight into the tool chain
+\end_layout
-\layout Enumerate
+\begin_layout Enumerate
make your students aware about the pros and cons of open source software
development
+\end_layout
-\layout Enumerate
+\begin_layout Enumerate
give back to the public as you are probably at least partially publically
funded
+\end_layout
-\layout Enumerate
+\begin_layout Enumerate
give students a chance to publically prove their skills and to possibly
see a world wide impact
+\end_layout
-\layout Standard
+\begin_layout Standard
then SDCC is probably among the first choices.
-\pagebreak_bottom
Well, probably SDCC might be the only choice.
+\newpage
+\end_layout
-\layout Chapter
+\begin_layout Chapter
SDCC Technical Data
+\end_layout
-\layout Section
+\begin_layout Section
Optimizations
\begin_inset LatexCommand \index{Optimizations}
\end_inset
+\end_layout
-\layout Standard
+\begin_layout Standard
SDCC performs a host of standard optimizations in addition to some MCU specific
optimizations.
+\end_layout
-\layout Subsection
+\begin_layout Subsection
Sub-expression Elimination
\begin_inset LatexCommand \index{Subexpression elimination}
\end_inset
+\end_layout
-\layout Standard
+\begin_layout Standard
The compiler does local and
\emph on
g
e
\emph default
limination, e.g.:
+\end_layout
-\layout Verse
+\begin_layout Verse
\family typewriter
i = x + y + 1;
\newline
j = x + y;
+\end_layout
-\layout Standard
+\begin_layout Standard
will be translated to
+\end_layout
-\layout Verse
+\begin_layout Verse
\family typewriter
iTemp = x + y;
i = iTemp + 1;
\newline
j = iTemp;
+\end_layout
-\layout Standard
+\begin_layout Standard
Some subexpressions are not as obvious as the above example, e.g.:
+\end_layout
-\layout Verse
+\begin_layout Verse
\family typewriter
a->b[i].c = 10;
\newline
a->b[i].d = 11;
+\end_layout
-\layout Standard
+\begin_layout Standard
In this case the address arithmetic a->b[i] will be computed only once;
the equivalent code in C would be.
+\end_layout
-\layout Verse
+\begin_layout Verse
\family typewriter
iTemp = a->b[i];
iTemp.c = 10;
\newline
iTemp.d = 11;
+\end_layout
-\layout Standard
+\begin_layout Standard
The compiler will try to keep these temporary variables in registers.
+\end_layout
-\layout Subsection
+\begin_layout Subsection
Dead-Code Elimination
\begin_inset LatexCommand \index{Dead-code elimination}
\end_inset
+\end_layout
-\layout Verse
+\begin_layout Verse
\family typewriter
int global;
\newline
void f () {
\newline
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
int i;
\newline
-\SpecialChar ~
-\SpecialChar ~
-i = 1; \SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+i = 1; \InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
/* dead store */
\newline
-\SpecialChar ~
-\SpecialChar ~
-global = 1;\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+global = 1;\InsetSpace ~
/* dead
store */
\newline
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
global = 2;
\newline
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
return;
\newline
-\SpecialChar ~
-\SpecialChar ~
-global = 3;\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+global = 3;\InsetSpace ~
/* unreachable */
\newline
}
+\end_layout
-\layout Standard
+\begin_layout Standard
will be changed to
+\end_layout
-\layout Verse
+\begin_layout Verse
\family typewriter
int global;
\newline
void f () {
\newline
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
global = 2;
\newline
}
+\end_layout
-\layout Subsection
+\begin_layout Subsection
Copy-Propagation
\begin_inset LatexCommand \index{Copy propagation}
\end_inset
+\end_layout
-\layout Verse
+\begin_layout Verse
\family typewriter
int f() {
\newline
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
int i, j;
\newline
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
i = 10;
\newline
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
j = i;
\newline
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
return j;
\newline
}
+\end_layout
-\layout Standard
+\begin_layout Standard
will be changed to
+\end_layout
-\layout Verse
+\begin_layout Verse
\family typewriter
int f() {
\newline
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
int i, j;
\newline
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
i = 10;
\newline
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
j = 10;
\newline
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
return 10;
\newline
}
+\end_layout
-\layout Standard
+\begin_layout Standard
Note: the dead stores created by this copy propagation will be eliminated
by dead-code elimination.
+\end_layout
-\layout Subsection
+\begin_layout Subsection
Loop Optimizations
\begin_inset LatexCommand \index{Loop optimization}
\end_inset
+\end_layout
-\layout Standard
+\begin_layout Standard
Two types of loop optimizations are done by SDCC
\emph on
loop invariant
If this extra space allocation is undesirable then induction optimization
can be eliminated either for the entire source file (with -
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
--noinduction option) or for a given function only using #pragma\SpecialChar ~
+-noinduction option) or for a given function only using #pragma\InsetSpace ~
noinduction
\begin_inset LatexCommand \index{\#pragma noinduction}
\newline
Loop Invariant:
+\end_layout
-\layout Verse
+\begin_layout Verse
\family typewriter
for (i = 0 ; i < 100 ; i ++)
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
f += k + l;
+\end_layout
-\layout Standard
+\begin_layout Standard
changed to
+\end_layout
-\layout Verse
+\begin_layout Verse
\family typewriter
itemp = k + l;
\newline
for (i = 0; i < 100; i++)
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
f += itemp;
+\end_layout
-\layout Standard
+\begin_layout Standard
As mentioned previously some loop invariants are not as apparent, all static
address computations are also moved out of the loop.
\newline
\end_inset
, this optimization substitutes an expression by a cheaper expression:
+\end_layout
-\layout Verse
+\begin_layout Verse
\family typewriter
for (i=0;i < 100; i++)
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
ar[i*5] = i*3;
+\end_layout
-\layout Standard
+\begin_layout Standard
changed to
+\end_layout
-\layout Verse
+\begin_layout Verse
\family typewriter
itemp1 = 0;
\newline
for (i=0;i< 100;i++) {
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
ar[itemp1] = itemp2;
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
itemp1
+= 5;
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
itemp2 += 3;
\newline
}
+\end_layout
-\layout Standard
+\begin_layout Standard
The more expensive multiplication
\begin_inset LatexCommand \index{Multiplication}
\end_inset
is changed to a less expensive addition.
+\end_layout
-\layout Subsection
+\begin_layout Subsection
Loop Reversing
\begin_inset LatexCommand \index{Loop reversing}
\end_inset
+\end_layout
-\layout Standard
+\begin_layout Standard
This optimization is done to reduce the overhead of checking loop boundaries
for every iteration.
Some simple loops can be reversed and implemented using a
SDCC checks for the following criterion to determine if a loop is reversible
(note: more sophisticated compilers use data-dependency analysis to make
this determination, SDCC uses a more simple minded analysis).
+\end_layout
-\layout Itemize
+\begin_layout Itemize
The 'for' loop is of the form
\newline
for(<symbol> = <expression>; <sym> [< | <=] <expression>; [<sym>++ | <sym>
+= 1])
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
<for body>
+\end_layout
-\layout Itemize
+\begin_layout Itemize
The <for body> does not contain
\begin_inset Quotes eld
\end_inset
\end_inset
.
+\end_layout
-\layout Itemize
+\begin_layout Itemize
All goto's are contained within the loop.
+\end_layout
-\layout Itemize
+\begin_layout Itemize
No function calls within the loop.
+\end_layout
-\layout Itemize
+\begin_layout Itemize
The loop control variable <sym> is not assigned any value within the loop
+\end_layout
-\layout Itemize
+\begin_layout Itemize
The loop control variable does NOT participate in any arithmetic operation
within the loop.
+\end_layout
-\layout Itemize
+\begin_layout Itemize
There are NO switch statements in the loop.
+\end_layout
-\layout Subsection
+\begin_layout Subsection
Algebraic Simplifications
+\end_layout
-\layout Standard
+\begin_layout Standard
SDCC does numerous algebraic simplifications, the following is a small sub-set
of these optimizations.
+\end_layout
-\layout Verse
+\begin_layout Verse
\family typewriter
-i = j + 0;\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
- /* changed to: */\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+i = j + 0;\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+ /* changed to: */\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
i = j;
\newline
-i /= 2;\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
- /* changed to: */\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+i /= 2;\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+ /* changed to: */\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
i >>= 1;
\newline
i
- = j - j;\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
- /* changed to: */\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+ = j - j;\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+ /* changed to: */\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
i = 0;
\newline
-i = j / 1;\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
- /* changed to: */\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+i = j / 1;\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+ /* changed to: */\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
i = j;
+\end_layout
-\layout Standard
+\begin_layout Standard
Note the subexpressions
\begin_inset LatexCommand \index{Subexpression}
given above are generally introduced by macro expansions or as a result
of copy/constant propagation.
+\end_layout
-\layout Subsection
+\begin_layout Subsection
'switch' Statements
\begin_inset LatexCommand \label{sub:'switch'-Statements}
\end_inset
+\end_layout
-\layout Standard
+\begin_layout Standard
SDCC can optimize switch statements to jump tables
\begin_inset LatexCommand \index{jump tables}
.
It makes the decision based on an estimate of the generated code size.
SDCC is quite liberal in the requirements for jump table generation:
+\end_layout
-\layout Itemize
+\begin_layout Itemize
The labels need not be in order, and the starting number need not be one
or zero, the case labels are in numerical sequence or not too many case
labels are missing.
+\end_layout
\begin_deeper
-\layout Verse
-
-\family typewriter
-switch(i) {\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\begin_layout Verse
+
+\family typewriter
+switch(i) {\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
switch (i) {
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-case 4: ...\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+case 4: ...\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
case 0: ...
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-case 5: ...\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+case 5: ...\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
case 1: ...
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-case 3: ...\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-
-\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-case 6: ...\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+case 3: ...\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+
+\newline
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+case 6: ...\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
case 3: ...
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-case 7: ...\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+case 7: ...\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
case 4: ...
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-case 8: ...\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+case 8: ...\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
case 5: ...
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-case 9: ...\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+case 9: ...\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
case 6: ...
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-case 10: ...\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+case 10: ...\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
case 7: ...
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-case 11: ...\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+case 11: ...\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
case 8: ...
\newline
-}\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+}\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
}
+\end_layout
-\layout Standard
+\begin_layout Standard
Both the above switch statements will be implemented using a jump-table.
The example to the right side is slightly more efficient as the check for
the lower boundary of the jump-table is not needed.
+\end_layout
\end_deeper
-\layout Itemize
+\begin_layout Itemize
The number of case labels is not larger than supported by the target architectur
e.
+\end_layout
-\layout Itemize
+\begin_layout Itemize
If the case labels are not in numerical sequence ('gaps' between cases)
SDCC checks whether a jump table with additionally inserted dummy cases
is still attractive.
+\end_layout
-\layout Itemize
+\begin_layout Itemize
If the starting number is not zero and a check for the lower boundary of
the jump-table can thus be eliminated SDCC might insert dummy cases 0,
...
.
+\end_layout
-\layout Standard
+\begin_layout Standard
Switch statements which have large gaps in the numeric sequence or those
that have too many case labels can be split into more than one switch statement
for efficient code generation, e.g.:
+\end_layout
-\layout Verse
+\begin_layout Verse
\family typewriter
switch (i) {
\newline
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
case 1: ...
\newline
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
case 2: ...
\newline
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
case 3: ...
\newline
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
case 4: ...
\newline
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
case 5: ...
\newline
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
case 6: ...
\newline
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
case 7: ...
\newline
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
case 101: ...
\newline
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
case 102: ...
\newline
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
case 103: ...
\newline
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
case 104: ...
\newline
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
case 105: ...
\newline
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
case 106: ...
\newline
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
case 107: ...
\newline
}
+\end_layout
-\layout Standard
+\begin_layout Standard
If the above switch statement is broken down into two switch statements
+\end_layout
-\layout Verse
+\begin_layout Verse
\family typewriter
switch (i) {
\newline
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
case 1: ...
\newline
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
case 2: ...
\newline
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
case 3: ...
\newline
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
case 4: ...
\newline
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
case 5: ...
\newline
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
case 6: ...
\newline
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
case 7: ...
\newline
}
+\end_layout
-\layout Standard
+\begin_layout Standard
and
+\end_layout
-\layout Verse
+\begin_layout Verse
\family typewriter
switch (i) {
\newline
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
case 101: ...
\newline
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
case 102: ...
\newline
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
case 103: ...
\newline
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
case 104: ...
\newline
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
case 105: ...
\newline
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
case 106: ...
\newline
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
case 107: ...
\newline
}
+\end_layout
-\layout Standard
+\begin_layout Standard
then both the switch statements will be implemented using jump-tables whereas
the unmodified switch statement will not be.
+\end_layout
-\layout Standard
-\begin_inset Note
-collapsed true
+\begin_layout Standard
+\begin_inset Note Note
+status collapsed
-\layout Standard
+\begin_layout Standard
There might be reasons which SDCC cannot know about to either favour or
not favour jump tables.
If the target system has to be as quick for the last switch case as for
the first (pro jump table), or if the switch argument is known to be zero
in the majority of the cases (contra jump table).
+\end_layout
\end_inset
+\end_layout
-\layout Standard
+\begin_layout Standard
The pragma nojtbound
\begin_inset LatexCommand \index{\#pragma nojtbound}
argument is not matched by a case statement the processor will happily
jump into Nirvana.
+\end_layout
-\layout Subsection
+\begin_layout Subsection
Bit-shifting Operations
\begin_inset LatexCommand \index{Bit shifting}
\end_inset
.
+\end_layout
-\layout Standard
+\begin_layout Standard
Bit shifting is one of the most frequently used operation in embedded programmin
g.
SDCC tries to implement bit-shift operations in the most efficient way
possible, e.g.:
+\end_layout
-\layout Verse
+\begin_layout Verse
\family typewriter
unsigned char i;
i >>= 4;
\newline
...
+\end_layout
-\layout Standard
+\begin_layout Standard
generates the following code:
+\end_layout
-\layout Verse
+\begin_layout Verse
\family typewriter
-mov\SpecialChar ~
+mov\InsetSpace ~
a,_i
\newline
swap a
\newline
-anl\SpecialChar ~
+anl\InsetSpace ~
a,#0x0f
\newline
-mov\SpecialChar ~
+mov\InsetSpace ~
_i,a
+\end_layout
-\layout Standard
+\begin_layout Standard
In general SDCC will never setup a loop if the shift count is known.
Another example:
+\end_layout
-\layout Verse
+\begin_layout Verse
\family typewriter
unsigned int i;
i >>= 9;
\newline
...
+\end_layout
-\layout Standard
+\begin_layout Standard
will generate:
+\end_layout
-\layout Verse
+\begin_layout Verse
\family typewriter
-mov\SpecialChar ~
-\SpecialChar ~
+mov\InsetSpace ~
+\InsetSpace ~
a,(_i + 1)
\newline
-mov\SpecialChar ~
-\SpecialChar ~
+mov\InsetSpace ~
+\InsetSpace ~
(_i + 1),#0x00
\newline
-clr\SpecialChar ~
-\SpecialChar ~
+clr\InsetSpace ~
+\InsetSpace ~
c
\newline
-rrc\SpecialChar ~
-\SpecialChar ~
+rrc\InsetSpace ~
+\InsetSpace ~
a
\newline
-mov\SpecialChar ~
-\SpecialChar ~
+mov\InsetSpace ~
+\InsetSpace ~
_i,a
+\end_layout
-\layout Subsection
+\begin_layout Subsection
Bit-rotation
\begin_inset LatexCommand \index{Bit rotation}
\end_inset
+\end_layout
-\layout Standard
+\begin_layout Standard
A special case of the bit-shift operation is bit rotation
\begin_inset LatexCommand \index{rotating bits}
\end_inset
, SDCC recognizes the following expression to be a left bit-rotation:
+\end_layout
-\layout Verse
+\begin_layout Verse
\family typewriter
\series bold
unsigned
\series default
-\SpecialChar ~
-\SpecialChar ~
-char i;\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+char i;\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
/* unsigned is needed for rotation */
\newline
...
\family typewriter
...
+\end_layout
-\layout Standard
+\begin_layout Standard
will generate the following code:
+\end_layout
-\layout Verse
+\begin_layout Verse
\family typewriter
-mov\SpecialChar ~
-\SpecialChar ~
+mov\InsetSpace ~
+\InsetSpace ~
a,_i
\newline
-rl\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+rl\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
a
\newline
-mov\SpecialChar ~
-\SpecialChar ~
+mov\InsetSpace ~
+\InsetSpace ~
_i,a
+\end_layout
-\layout Standard
+\begin_layout Standard
SDCC uses pattern matching on the parse tree to determine this operation.Variatio
ns of this case will also be recognized as bit-rotation, i.e.:
+\end_layout
-\layout Verse
+\begin_layout Verse
\family typewriter
i = ((i >> 7) | (i << 1)); /* left-bit rotation */
+\end_layout
-\layout Subsection
+\begin_layout Subsection
Nibble and Byte Swapping
+\end_layout
-\layout Standard
+\begin_layout Standard
Other special cases of the bit-shift operations are nibble or byte swapping
\begin_inset LatexCommand \index{swapping nibbles/bytes}
\end_inset
, SDCC recognizes the following expressions:
+\end_layout
-\layout Verse
+\begin_layout Verse
\family typewriter
\series bold
unsigned
\series default
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
char i;
\newline
\series bold
unsigned
\series default
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
int j;
\newline
...
\family typewriter
j = ((j << 8) | (j >> 8));
+\end_layout
-\layout Standard
+\begin_layout Standard
and generates a swap instruction for the nibble swapping
\begin_inset LatexCommand \index{Nibble swapping}
(unsigned int)
\family default
first.
+\end_layout
-\layout Standard
+\begin_layout Standard
Note that SDCC stores numbers in little-endian
\begin_inset Foot
-collapsed false
+status open
-\layout Standard
+\begin_layout Standard
Usually 8-bit processors don't care much about endianness.
This is not the case for the standard 8051 which only has an instruction
to increment its
\emph default
so little-endian is the more efficient byte order.
+\end_layout
\end_inset
format (i.e.
lowest order first).
+\end_layout
-\layout Subsection
+\begin_layout Subsection
Highest Order Bit
\begin_inset LatexCommand \index{Highest Order Bit}
\end_inset
+\end_layout
-\layout Standard
+\begin_layout Standard
It is frequently required to obtain the highest order bit of an integral
type (long, int, short or char types).
Also obtaining any other order bit is not uncommon.
SDCC recognizes the following expressions to yield the highest order bit
and generates optimized code for it, e.g.:
+\end_layout
-\layout Verse
+\begin_layout Verse
\family typewriter
unsigned int gint;
\newline
foo () {
\newline
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
unsigned char hob1, aob1;
\newline
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
bit hob2, hob3, aob2,
aob3;
\newline
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
...
\newline
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
hob1 = (gint >> 15) & 1;
\newline
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
hob2 = (gint >> 15) & 1;
\newline
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
hob3 = gint & 0x8000;
\newline
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
aob1 = (gint >> 9) & 1;
\newline
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
aob2 = (gint >> 8) & 1;
\newline
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
aob3 = gint & 0x0800;
\newline
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
..
\newline
}
+\end_layout
-\layout Standard
+\begin_layout Standard
will generate the following code:
+\end_layout
+
+\begin_layout Verse
-\layout Verse
-
-\family typewriter
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
- 61 ;\SpecialChar ~
+\family typewriter
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+ 61 ;\InsetSpace ~
hob.c 7
\newline
-000A E5*01\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
- 62\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
- mov\SpecialChar ~
-\SpecialChar ~
+000A E5*01\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+ 62\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+ mov\InsetSpace ~
+\InsetSpace ~
a,(_gint + 1)
\newline
-000C 23\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
- 63\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
- rl\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+000C 23\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+ 63\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+ rl\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
a
\newline
-000D 54 01\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-
- 64\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
- anl\SpecialChar ~
-\SpecialChar ~
+000D 54 01\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+
+ 64\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+ anl\InsetSpace ~
+\InsetSpace ~
a,#0x01
\newline
-000F F5*02\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
- 65\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
- mov\SpecialChar ~
-\SpecialChar ~
+000F F5*02\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+ 65\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+ mov\InsetSpace ~
+\InsetSpace ~
_foo_hob1_1_1,a
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
- 66 ;\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+ 66 ;\InsetSpace ~
hob.c 8
\newline
-0011 E5*01\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-
- 67\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
- mov\SpecialChar ~
-\SpecialChar ~
+0011 E5*01\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+
+ 67\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+ mov\InsetSpace ~
+\InsetSpace ~
a,(_gint + 1)
\newline
-0013 33\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
- 68\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
- rlc\SpecialChar ~
-\SpecialChar ~
+0013 33\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+ 68\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+ rlc\InsetSpace ~
+\InsetSpace ~
a
\newline
-0014 92*00\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
- 69\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
- mov\SpecialChar ~
-\SpecialChar ~
+0014 92*00\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+ 69\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+ mov\InsetSpace ~
+\InsetSpace ~
_foo_hob2_1_1,c
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
- 66 ;\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+ 66 ;\InsetSpace ~
hob.c 9
\newline
-0016 E5*01\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
- 67\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
- mov\SpecialChar ~
-\SpecialChar ~
+0016 E5*01\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+ 67\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+ mov\InsetSpace ~
+\InsetSpace ~
a,(_gint + 1)
\newline
-0018 33\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
- 68\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
- rlc\SpecialChar ~
-\SpecialChar ~
+0018 33\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+ 68\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+ rlc\InsetSpace ~
+\InsetSpace ~
a
\newline
-0019 92*01\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-
- 69\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
- mov\SpecialChar ~
-\SpecialChar ~
+0019 92*01\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+
+ 69\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+ mov\InsetSpace ~
+\InsetSpace ~
_foo_hob3_1_1,c
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
- 70 ;\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+ 70 ;\InsetSpace ~
hob.c 10
\newline
-001B E5*01\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
- 71\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
- mov\SpecialChar ~
-\SpecialChar ~
+001B E5*01\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+ 71\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+ mov\InsetSpace ~
+\InsetSpace ~
a,(_gint + 1)
\newline
001D
- 03\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
- 72\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
- rr\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+ 03\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+ 72\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+ rr\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
a
\newline
-001E 54 01\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
- 73\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
- anl\SpecialChar ~
-\SpecialChar ~
+001E 54 01\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+ 73\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+ anl\InsetSpace ~
+\InsetSpace ~
a,#0x01
\newline
-0020 F5*03\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
- 74\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
- mov\SpecialChar ~
-\SpecialChar ~
+0020 F5*03\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+ 74\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+ mov\InsetSpace ~
+\InsetSpace ~
_foo_aob1_1_1,a
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
- 75 ;\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+ 75 ;\InsetSpace ~
hob.c 11
\newline
-0022 E5*01\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
- 76\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
- mov\SpecialChar ~
-\SpecialChar ~
+0022 E5*01\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+ 76\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+ mov\InsetSpace ~
+\InsetSpace ~
a,(_gint + 1)
\newline
-0024 13\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
- 77\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
- rrc\SpecialChar ~
-\SpecialChar ~
+0024 13\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+ 77\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+ rrc\InsetSpace ~
+\InsetSpace ~
a
\newline
-0025 92*02\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-
- 78\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
- mov\SpecialChar ~
-\SpecialChar ~
+0025 92*02\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+
+ 78\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+ mov\InsetSpace ~
+\InsetSpace ~
_foo_aob2_1_1,c
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
- 79 ;\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+ 79 ;\InsetSpace ~
hob.c 12
\newline
-0027 E5*01\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
- 80\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
- mov\SpecialChar ~
-\SpecialChar ~
+0027 E5*01\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+ 80\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+ mov\InsetSpace ~
+\InsetSpace ~
a,(_gint + 1)
\newline
0029
- A2 E3\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
- 81\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
- mov\SpecialChar ~
-\SpecialChar ~
+ A2 E3\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+ 81\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+ mov\InsetSpace ~
+\InsetSpace ~
c,acc[3]
\newline
-002B 92*03\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
- 82\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
- mov\SpecialChar ~
-\SpecialChar ~
+002B 92*03\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+ 82\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+ mov\InsetSpace ~
+\InsetSpace ~
_foo_aob3_1_1,c
+\end_layout
-\layout Standard
+\begin_layout Standard
Other variations of these cases however will
\emph on
not
way to get the highest order bit, (it is portable).
Of course it will be recognized even if it is embedded in other expressions,
e.g.:
+\end_layout
-\layout Verse
+\begin_layout Verse
\family typewriter
xyz = gint + ((gint >> 15) & 1);
+\end_layout
-\layout Standard
+\begin_layout Standard
will still be recognized.
+\end_layout
-\layout Subsection
+\begin_layout Subsection
Higher Order Byte
\begin_inset LatexCommand \index{Higher Order Byte}
\end_inset
+\end_layout
-\layout Standard
+\begin_layout Standard
It is also frequently required to obtain a higher order byte or word of
a larger integral type (long, int or short types).
SDCC recognizes the following expressions to yield the higher order byte
or word and generates optimized code for it, e.g.:
+\end_layout
-\layout Verse
+\begin_layout Verse
\family typewriter
unsigned int gint;
\newline
foo () {
\newline
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
unsigned char hob1,
hob2;
\newline
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
unsigned int how1, how2;
\newline
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
...
\newline
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
hob1 = (gint >> 8) & 0xFF;
\newline
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
hob2 = glong >> 24;
\newline
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
how1 = (glong >> 16) & 0xFFFF;
\newline
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
how2 = glong >> 8;
\newline
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
..
\newline
}
+\end_layout
-\layout Standard
+\begin_layout Standard
will generate the following code:
+\end_layout
+
+\begin_layout Verse
-\layout Verse
-
-\family typewriter
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
- 91 ;\SpecialChar ~
+\family typewriter
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+ 91 ;\InsetSpace ~
hob.c 15
\newline
-0037 85*01*06\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
- 92\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
- mov\SpecialChar ~
-\SpecialChar ~
+0037 85*01*06\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+ 92\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+ mov\InsetSpace ~
+\InsetSpace ~
_foo_hob1_1_1,(_gint + 1)
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
- 93 ;\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+ 93 ;\InsetSpace ~
hob.c
16
\newline
-003A 85*05*07\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
- 94\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
- mov\SpecialChar ~
-\SpecialChar ~
+003A 85*05*07\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+ 94\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+ mov\InsetSpace ~
+\InsetSpace ~
_foo_hob2_1_1,(_glong + 3)
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
- 95 ;\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+ 95 ;\InsetSpace ~
hob.c 17
\newline
-003D 85*04*08\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-
- 96\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
- mov\SpecialChar ~
-\SpecialChar ~
+003D 85*04*08\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+
+ 96\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+ mov\InsetSpace ~
+\InsetSpace ~
_foo_how1_1_1,(_glong + 2)
\newline
-0040 85*05*09\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
- 97\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
- mov\SpecialChar ~
-\SpecialChar ~
+0040 85*05*09\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+ 97\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+ mov\InsetSpace ~
+\InsetSpace ~
(_foo_how1_1_1 +
1),(_glong + 3)
\newline
-0043 85*03*0A\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
- 98\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
- mov\SpecialChar ~
-\SpecialChar ~
+0043 85*03*0A\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+ 98\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+ mov\InsetSpace ~
+\InsetSpace ~
_foo_how2_1_1,(_glong + 1)
\newline
-0046 85*04*0B\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-
- 99\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
- mov\SpecialChar ~
-\SpecialChar ~
+0046 85*04*0B\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+
+ 99\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+ mov\InsetSpace ~
+\InsetSpace ~
(_foo_how2_1_1 + 1),(_glong + 2)
+\end_layout
-\layout Standard
+\begin_layout Standard
Again, variations of these cases may
\emph on
not
way to get the higher order byte/word, (it is portable).
Of course it will be recognized even if it is embedded in other expressions,
e.g.:
+\end_layout
-\layout Verse
+\begin_layout Verse
\family typewriter
xyz = gint + ((gint >> 8) & 0xFF);
+\end_layout
-\layout Standard
+\begin_layout Standard
will still be recognized.
+\end_layout
-\layout Subsection
+\begin_layout Subsection
Peephole Optimizer
\begin_inset LatexCommand \label{sub:Peephole-Optimizer}
\end_inset
+\end_layout
-\layout Standard
+\begin_layout Standard
The compiler uses a rule based, pattern matching and re-writing mechanism
for peep-hole optimization.
It is inspired by
copt
\emph default
a peep-hole optimizer by Christopher W.
- Fraser (cwfraser\SpecialChar ~
-@\SpecialChar ~
+ Fraser (cwfraser\InsetSpace ~
+@\InsetSpace ~
microsoft.com).
A default set of rules are compiled into the compiler, additional rules
may be added with the
\emph on
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
\emph default
option.
The rule language is best illustrated with examples.
+\end_layout
-\layout Verse
+\begin_layout Verse
\family typewriter
replace {
\newline
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
mov %1,a
\newline
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
mov a,%1
\newline
} by {
\newline
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
mov %1,a
\newline
}
+\end_layout
-\layout Standard
+\begin_layout Standard
The above rule will change the following assembly
\begin_inset LatexCommand \index{Assembler routines}
\end_inset
sequence:
+\end_layout
-\layout Verse
+\begin_layout Verse
\family typewriter
mov r1,a
\newline
mov a,r1
+\end_layout
-\layout Standard
+\begin_layout Standard
to
+\end_layout
-\layout Verse
+\begin_layout Verse
\family typewriter
mov r1,a
+\end_layout
-\layout Standard
+\begin_layout Standard
Note: All occurrences of a
\emph on
%n
\emph default
(pattern variable) must denote the same string.
With the above rule, the assembly sequence:
+\end_layout
-\layout Verse
+\begin_layout Verse
\family typewriter
mov r1,a
\newline
mov a,r2
+\end_layout
-\layout Standard
+\begin_layout Standard
will remain unmodified.
\newline
\emph on
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
and
\family typewriter
acall
+\end_layout
-\layout Verse
+\begin_layout Verse
\family typewriter
replace { lcall %1 } by { acall %1 }
\newline
replace { ljmp %1 } by { ajmp %1 }
+\end_layout
+
+\begin_layout Standard
+(NOTE: from version 2.7.3 on, you can use option -
+\emph on
+
+\begin_inset ERT
+status collapsed
+
+\begin_layout Standard
+
+
+\backslash
+/
+\end_layout
+
+\end_inset
+
+
+\emph default
+-acall-ajmp
+\begin_inset LatexCommand \index{-\/-acall-ajmp}
+
+\end_inset
+
+, which also takes care of aligning the interrupt vectors properly.)
+\newline
+
+\end_layout
-\layout Standard
+\begin_layout Standard
The
\emph on
inline-assembler code
\newline
The syntax for a rule is as follows:
+\end_layout
-\layout Verse
+\begin_layout Verse
\family typewriter
rule := replace [ restart ] '{' <assembly sequence> '
\backslash
n'
\newline
-\SpecialChar ~
- \SpecialChar ~
- \SpecialChar ~
- \SpecialChar ~
- \SpecialChar ~
- \SpecialChar ~
- \SpecialChar ~
- \SpecialChar ~
- \SpecialChar ~
- \SpecialChar ~
- \SpecialChar ~
- \SpecialChar ~
- \SpecialChar ~
- \SpecialChar ~
+\InsetSpace ~
+ \InsetSpace ~
+ \InsetSpace ~
+ \InsetSpace ~
+ \InsetSpace ~
+ \InsetSpace ~
+ \InsetSpace ~
+ \InsetSpace ~
+ \InsetSpace ~
+ \InsetSpace ~
+ \InsetSpace ~
+ \InsetSpace ~
+ \InsetSpace ~
+ \InsetSpace ~
'}' by '{' '
\backslash
n'
\newline
-\SpecialChar ~
- \SpecialChar ~
- \SpecialChar ~
- \SpecialChar ~
- \SpecialChar ~
- \SpecialChar ~
- \SpecialChar ~
- \SpecialChar ~
- \SpecialChar ~
- \SpecialChar ~
- \SpecialChar ~
- \SpecialChar ~
- \SpecialChar ~
- \SpecialChar ~
- \SpecialChar ~
- \SpecialChar ~
+\InsetSpace ~
+ \InsetSpace ~
+ \InsetSpace ~
+ \InsetSpace ~
+ \InsetSpace ~
+ \InsetSpace ~
+ \InsetSpace ~
+ \InsetSpace ~
+ \InsetSpace ~
+ \InsetSpace ~
+ \InsetSpace ~
+ \InsetSpace ~
+ \InsetSpace ~
+ \InsetSpace ~
+ \InsetSpace ~
+ \InsetSpace ~
<assembly sequence> '
\backslash
n'
\newline
-\SpecialChar ~
- \SpecialChar ~
- \SpecialChar ~
- \SpecialChar ~
- \SpecialChar ~
- \SpecialChar ~
- \SpecialChar ~
- \SpecialChar ~
- \SpecialChar ~
- \SpecialChar ~
- \SpecialChar ~
- \SpecialChar ~
- \SpecialChar ~
- \SpecialChar ~
+\InsetSpace ~
+ \InsetSpace ~
+ \InsetSpace ~
+ \InsetSpace ~
+ \InsetSpace ~
+ \InsetSpace ~
+ \InsetSpace ~
+ \InsetSpace ~
+ \InsetSpace ~
+ \InsetSpace ~
+ \InsetSpace ~
+ \InsetSpace ~
+ \InsetSpace ~
+ \InsetSpace ~
'}' [if <functionName> ] '
\backslash
n'
+\end_layout
-\layout Standard
+\begin_layout Standard
<assembly sequence> := assembly instruction (each instruction including
labels must be on a separate line).
\newline
the same rule again.
An example of this (not a good one, it has side effects) is the following
rule:
+\end_layout
-\layout Verse
+\begin_layout Verse
\family typewriter
replace restart {
\newline
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
pop %1
\newline
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
push %1 } by {
\newline
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
; nop
\newline
}
+\end_layout
-\layout Standard
+\begin_layout Standard
Note that the replace pattern cannot be a blank, but can be a comment line.
Without the 'restart' option only the innermost 'pop' 'push' pair would
be eliminated, i.e.:
+\end_layout
-\layout Verse
+\begin_layout Verse
\family typewriter
pop ar1
push ar2
\newline
push ar1
+\end_layout
-\layout Standard
+\begin_layout Standard
would result in:
+\end_layout
-\layout Verse
+\begin_layout Verse
\family typewriter
pop ar1
; nop
\newline
push ar1
+\end_layout
-\layout Standard
+\begin_layout Standard
\emph on
with
\emph default
the restart option the rule will be applied again to the resulting code
and then all the pop-push pairs will be eliminated to yield:
+\end_layout
-\layout Verse
+\begin_layout Verse
\family typewriter
; nop
\newline
; nop
+\end_layout
-\layout Standard
+\begin_layout Standard
A conditional function can be attached to a rule.
Attaching rules are somewhat more involved, let me illustrate this with
an example.
+\end_layout
-\layout Verse
+\begin_layout Verse
\family typewriter
replace {
\newline
-\SpecialChar ~
- \SpecialChar ~
- \SpecialChar ~
+\InsetSpace ~
+ \InsetSpace ~
+ \InsetSpace ~
ljmp %5
\newline
%2:
\newline
} by {
\newline
-\SpecialChar ~
- \SpecialChar ~
- \SpecialChar ~
+\InsetSpace ~
+ \InsetSpace ~
+ \InsetSpace ~
sjmp %5
\newline
%2:
\newline
} if labelInRange
+\end_layout
-\layout Standard
+\begin_layout Standard
The optimizer does a look-up of a function name table defined in function
\emph on
notVolatile
\emph default
.
+\end_layout
-\layout Standard
+\begin_layout Standard
I know this whole thing is a little kludgey, but maybe some day we will
have some better means.
If you are looking at this file, you will see the default rules that are
compiled into the compiler, you can add your own rules in the default set
there if you get tired of specifying the -
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
-peep-file option.
+\end_layout
-\layout Section
+\begin_layout Section
ANSI-Compliance
\begin_inset LatexCommand \index{ANSI-compliance}
\end_inset
+\end_layout
-\layout Standard
+\begin_layout Standard
The latest publically available version of the standard
\emph on
ISO/IEC 9899 - Programming languages - C
.
\newline
+\end_layout
-\layout Standard
+\begin_layout Standard
Deviations from the compliance:
+\end_layout
-\layout Itemize
+\begin_layout Itemize
functions are not reentrant
\begin_inset LatexCommand \index{reentrant}
\series bold
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
\series default
command line option is specified.
+\end_layout
-\layout Itemize
+\begin_layout Itemize
structures
\begin_inset LatexCommand \index{struct}
\end_inset
from a function, e.g.:
+\end_layout
\begin_deeper
-\layout Verse
+\begin_layout Verse
\family typewriter
struct s { ...
\newline
{
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
...
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
s1 = s2 ; /* is invalid in SDCC although allowed in ANSI */
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
...
\newline
\newline
{
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
struct s rets;
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
...
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
return rets; /* is invalid in SDCC although allowed in ANSI */
\newline
}
+\end_layout
\end_deeper
-\layout Itemize
+\begin_layout Itemize
initialization of structure arrays must be fully braced.
+\end_layout
\begin_deeper
-\layout Verse
+\begin_layout Verse
\family typewriter
-struct s { char x } a[] = {1, 2};\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+struct s { char x } a[] = {1, 2};\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
/* invalid in SDCC */
\newline
struct s { char x
} a[] = {{1}, {2}}; /* OK */
+\end_layout
\end_deeper
-\layout Itemize
+\begin_layout Itemize
'long long
\begin_inset LatexCommand \index{long long (not supported)}
\end_inset
) not supported.
+\end_layout
-\layout Itemize
+\begin_layout Itemize
'double
\begin_inset LatexCommand \index{double (not supported)}
\end_inset
not supported.
+\end_layout
-\layout Itemize
+\begin_layout Itemize
Old K&R style
\begin_inset LatexCommand \index{K\&R style}
\end_inset
function declarations are NOT allowed.
+\end_layout
\begin_deeper
-\layout Verse
+\begin_layout Verse
\family typewriter
foo(i,j) /* this old style of function declarations */
\newline
-int i,j; /* are valid
+int i,j; /* is valid
in ANSI but not valid in SDCC */
\newline
{
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
...
\newline
}
+\end_layout
+
+\end_deeper
+\begin_layout Itemize
+Most enhancements in C99 are not supported, e.g.:
+\end_layout
+
+\begin_deeper
+\begin_layout Verse
+
+\family typewriter
+for (
+\series bold
+int
+\series default
+ i=0; i<10; i++) /* is invalid in SDCC although allowed in C99 */
+\end_layout
\end_deeper
-\layout Itemize
-Most enhancements in C99 are not supported, f.e.:
+\begin_layout Itemize
+But some have been added recently in SDCC 2.7.0.
+ They must be considered alpha quality however.
+\end_layout
\begin_deeper
-\layout Verse
+\begin_layout Verse
\family typewriter
\series bold
\series default
- int increment (int a) { return a+1; } /* is invalid in SDCC although allowed
- in C99.
- An empty define
-\emph on
-#define inline
-\emph default
- can be used as a work around */
-\newline
-
+ int increment (int a) { return a+1; } /* inlines the increment without
+ function call overhead */
\newline
-for (
+int *
\series bold
-int
+restrict
+\begin_inset LatexCommand \index{inline (not supported)}
+
+\end_inset
+
+
\series default
- i=0; i<10; i++) /* is invalid in SDCC although allowed in C99 */
+ p; /* accepted but ignored */
+\end_layout
\end_deeper
-\layout Itemize
+\begin_layout Itemize
Certain words that are valid identifiers in the standard may be reserved
words in SDCC unless the
\series bold
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
or -
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
, f.e.
'__data' instead of 'data'.
+\end_layout
-\layout Section
+\begin_layout Section
Cyclomatic Complexity
\begin_inset LatexCommand \index{Cyclomatic complexity}
\end_inset
+\end_layout
-\layout Standard
+\begin_layout Standard
Cyclomatic complexity of a function is defined as the number of independent
paths the program can take during execution of the function.
This is an important number since it defines the number test cases you
SDCC uses the following formula to compute the complexity:
\newline
+\end_layout
-\layout Standard
+\begin_layout Standard
complexity = (number of edges in control flow graph) - (number of nodes
in control flow graph) + 2;
\newline
The complexity level is by no means an absolute measure of the algorithmic
complexity of the function, it does however provide a good starting point
for which functions you might look at for further optimization.
+\end_layout
-\layout Section
+\begin_layout Section
Retargetting for other Processors
+\end_layout
-\layout Standard
+\begin_layout Standard
The issues for retargetting the compiler are far too numerous to be covered
by this document.
What follows is a brief description of each of the seven phases of the
compiler and its MCU dependency.
+\end_layout
-\layout Itemize
+\begin_layout Itemize
Parsing the source and building the annotated parse tree.
This phase is largely MCU independent (except for the language extensions).
Syntax & semantic checks are also done in this phase, along with some initial
optimizations like back patching labels and the pattern matching optimizations
like bit-rotation etc.
+\end_layout
-\layout Itemize
+\begin_layout Itemize
The second phase involves generating an intermediate code which can be easy
manipulated during the later phases.
This phase is entirely MCU independent.
The compiler can be made to dump a human readable form of the code generated
by using the -
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
-dumpraw option.
+\end_layout
-\layout Itemize
+\begin_layout Itemize
This phase does the bulk of the standard optimizations and is also MCU independe
nt.
This phase can be broken down into several sub-phases:
If loop optimizations
caused any changes then do 'global subexpression elimination' and 'dead
code elimination' again.
+\end_layout
-\layout Itemize
+\begin_layout Itemize
This phase determines the live-ranges; by live range I mean those iTemp
variables defined by the compiler that still survive after all the optimization
s.
is essential for register allocation, since these computation determines
which of these iTemps will be assigned to registers, and for how long.
+\end_layout
-\layout Itemize
+\begin_layout Itemize
Phase five is register allocation.
There are two parts to this process.
\newline
allocating registers to the remaining live ranges.
A lot of MCU specific code does creep into this phase because of the limited
number of index registers available in the 8051.
+\end_layout
-\layout Itemize
+\begin_layout Itemize
The Code generation phase is (unhappily), entirely MCU dependent and very
little (if any at all) of this code can be reused for other MCU.
However the scheme for allocating a homogenized assembler operand for each
iCode operand may be reused.
+\end_layout
-\layout Itemize
+\begin_layout Itemize
As mentioned in the optimization section the peep-hole optimizer is rule
based system, which can reprogrammed for other MCUs.
+\end_layout
-\layout Standard
-More information is available in a wiki
+\begin_layout Standard
+More information is available on SDCC Wiki
\begin_inset LatexCommand \index{wiki}
\end_inset
(preliminary link
-\begin_inset LatexCommand \url{http://sdcc.sourceforge.net/release_wiki/index.php?page=SDCC+internals+and+porting}
+\begin_inset LatexCommand \url{http://sdcc.wiki.sourceforge.net/SDCC+internals+and+porting}
\end_inset
\end_inset
.
+\end_layout
-\layout Chapter
+\begin_layout Chapter
Compiler internals
\begin_inset LatexCommand \index{Compiler internals}
\end_inset
+\end_layout
-\layout Section
+\begin_layout Section
The anatomy of the compiler
\begin_inset LatexCommand \label{sub:The-anatomy-of}
\end_inset
+\end_layout
-\layout Standard
+\begin_layout Standard
\shape italic
This is an excerpt from an article published in Circuit Cellar Magazine
It is fairly easy to retarget for other 8-bit MCU.
Here we take a look at some of the internals of the compiler.
+\end_layout
-\layout Paragraph*
+\begin_layout Paragraph*
Parsing
\begin_inset LatexCommand \index{Parsing}
\end_inset
+\end_layout
-\layout Standard
+\begin_layout Standard
Parsing the input source file and creating an AST (Annotated Syntax Tree
\begin_inset LatexCommand \index{Annotated syntax tree}
xdata will be treated as a storage class specifier when parsing 8051 C
code but will be treated as a C identifier when parsing z80 or ATMEL AVR
C code.
+\end_layout
-\layout Paragraph*
+\begin_layout Paragraph*
Generating iCode
\begin_inset LatexCommand \index{iCode}
\end_inset
+\end_layout
-\layout Standard
+\begin_layout Standard
Intermediate code generation.
In this phase the AST is broken down into three-operand form (iCode).
These three operand forms are represented as doubly linked lists.
ICode is the term given to the intermediate form generated by the compiler.
ICode example section shows some examples of iCode generated for some simple
C source functions.
+\end_layout
-\layout Paragraph*
+\begin_layout Paragraph*
Optimizations
\begin_inset LatexCommand \index{Optimizations}
\end_inset
.
+\end_layout
-\layout Standard
+\begin_layout Standard
Bulk of the target independent optimizations is performed in this phase.
The optimizations include constant propagation, common sub-expression eliminati
on, loop invariant code movement, strength reduction of loop induction variables
and dead-code elimination.
+\end_layout
-\layout Paragraph*
+\begin_layout Paragraph*
Live range analysis
\begin_inset LatexCommand \index{Live range analysis}
\end_inset
+\end_layout
-\layout Standard
+\begin_layout Standard
During intermediate code generation phase, the compiler assumes the target
machine has infinite number of registers and generates a lot of temporary
variables.
The live ranges are computed in terms of these numbers.
The from number is the number of the iCode which first defines the operand
and the to number signifies the iCode which uses this operand last.
+\end_layout
-\layout Paragraph*
+\begin_layout Paragraph*
Register Allocation
\begin_inset LatexCommand \index{Register allocation}
\end_inset
+\end_layout
-\layout Standard
+\begin_layout Standard
The register allocation determines the type and number of registers needed
by each operand.
In most MCUs only a few registers can be used for indirect addressing.
operand and use the registers in this block, the operand will then be popped
at the end of the basic block.
+\end_layout
-\layout Standard
+\begin_layout Standard
There are other MCU specific considerations in this phase.
Some MCUs have an accumulator; very short-lived operands could be assigned
to the accumulator instead of a general-purpose register.
+\end_layout
-\layout Paragraph*
+\begin_layout Paragraph*
Code generation
+\end_layout
-\layout Standard
+\begin_layout Standard
Figure II gives a table of iCode
\begin_inset LatexCommand \index{iCode}
\newline
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
Figure II
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\series bold
iCode
\end_inset
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\series bold
Operands
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\series bold
Description
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\series bold
C Equivalent
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
'!'
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
IC_LEFT() IC_RESULT()
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
NOT operation
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
IC_RESULT = ! IC_LEFT;
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
'~'
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
IC_LEFT() IC_RESULT()
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
Bitwise complement of
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
IC_RESULT = ~IC_LEFT;
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
RRC
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
IC_LEFT() IC_RESULT()
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
Rotate right with carry
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
IC_RESULT = (IC_LEFT << 1) | (IC_LEFT >> (sizeof(IC_LEFT)*8-1));
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
RLC
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
IC_LEFT() IC_RESULT()
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
Rotate left with carry
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
IC_RESULT = (IC_LEFT << (sizeof(LC_LEFT)*8-1) ) | (IC_LEFT >> 1);
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
GETHBIT
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
IC_LEFT() IC_RESULT()
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
Get the highest order bit of IC_LEFT
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
IC_RESULT = (IC_LEFT >> (sizeof(IC_LEFT)*8 -1));
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
UNARYMINUS
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
IC_LEFT() IC_RESULT()
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
Unary minus
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
IC_RESULT = - IC_LEFT;
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
IPUSH
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
IC_LEFT()
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
Push the operand into stack
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
NONE
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
IPOP
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
IC_LEFT()
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
Pop the operand from the stack
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
NONE
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
CALL
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
IC_LEFT() IC_RESULT()
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
Call the function represented by IC_LEFT
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
IC_RESULT = IC_LEFT();
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
PCALL
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
IC_LEFT() IC_RESULT()
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
Call via function pointer
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
IC_RESULT = (*IC_LEFT)();
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
RETURN
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
IC_LEFT()
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
Return the value in operand IC_LEFT
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
return IC_LEFT;
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
LABEL
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
IC_LABEL()
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
Label
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
IC_LABEL:
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
GOTO
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
IC_LABEL()
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
Goto label
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
goto IC_LABEL();
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
'+'
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
IC_LEFT() IC_RIGHT() IC_RESULT()
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
Addition
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
IC_RESULT = IC_LEFT + IC_RIGHT
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
'-'
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
IC_LEFT() IC_RIGHT() IC_RESULT()
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
Subtraction
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
IC_RESULT = IC_LEFT - IC_RIGHT
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
'*'
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
IC_LEFT() IC_RIGHT() IC_RESULT()
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
Multiplication
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
IC_RESULT = IC_LEFT * IC_RIGHT;
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
'/'
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
IC_LEFT() IC_RIGHT() IC_RESULT()
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
Division
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
IC_RESULT = IC_LEFT / IC_RIGHT;
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
'%'
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
IC_LEFT() IC_RIGHT() IC_RESULT()
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
Modulus
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
IC_RESULT = IC_LEFT % IC_RIGHT;
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
'<'
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
IC_LEFT() IC_RIGHT() IC_RESULT()
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
Less than
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
IC_RESULT = IC_LEFT < IC_RIGHT;
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
'>'
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
IC_LEFT() IC_RIGHT() IC_RESULT()
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
Greater than
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
IC_RESULT = IC_LEFT > IC_RIGHT;
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
EQ_OP
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
IC_LEFT() IC_RIGHT() IC_RESULT()
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
Equal to
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
IC_RESULT = IC_LEFT == IC_RIGHT;
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
AND_OP
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
IC_LEFT() IC_RIGHT() IC_RESULT()
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
Logical and operation
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
IC_RESULT = IC_LEFT && IC_RIGHT;
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
OR_OP
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
IC_LEFT() IC_RIGHT() IC_RESULT()
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
Logical or operation
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
IC_RESULT = IC_LEFT || IC_RIGHT;
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
'^'
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
IC_LEFT() IC_RIGHT() IC_RESULT()
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
Exclusive OR
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
IC_RESULT = IC_LEFT ^ IC_RIGHT;
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
'|'
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
IC_LEFT() IC_RIGHT() IC_RESULT()
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
Bitwise OR
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
IC_RESULT = IC_LEFT | IC_RIGHT;
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
BITWISEAND
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
IC_LEFT() IC_RIGHT() IC_RESULT()
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
Bitwise AND
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
IC_RESULT = IC_LEFT & IC_RIGHT;
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
LEFT_OP
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
IC_LEFT() IC_RIGHT() IC_RESULT()
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
Left shift
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
IC_RESULT = IC_LEFT << IC_RIGHT
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
RIGHT_OP
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
IC_LEFT() IC_RIGHT() IC_RESULT()
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
Right shift
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
IC_RESULT = IC_LEFT >> IC_RIGHT
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
GET_VALUE_
\newline
AT_ ADDRESS
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
IC_LEFT() IC_RESULT()
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
Indirect fetch
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
IC_RESULT = (*IC_LEFT);
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
POINTER_SET
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
IC_RIGHT() IC_RESULT()
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
Indirect set
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
(*IC_RESULT) = IC_RIGHT;
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
'='
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
IC_RIGHT() IC_RESULT()
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
Assignment
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
IC_RESULT = IC_RIGHT;
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
IFX
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
IC_COND IC_TRUE IC_LABEL
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
Conditional jump.
If true label is present then jump to true label if condition is true else
jump to false label if condition is false
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
if (IC_COND) goto IC_TRUE;
\newline
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
Or
\newline
If (!IC_COND) goto IC_FALSE;
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
ADDRESS_OF
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
IC_LEFT() IC_RESULT()
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
Address of
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
IC_RESULT = &IC_LEFT();
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
JUMPTABLE
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
IC_JTCOND IC_JTLABELS
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
Jump to list of labels depending on the value of JTCOND
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
Switch statement
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
CAST
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
IC_RIGHT() IC_LEFT() IC_RESULT()
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
Cast types
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
IC_RESULT = (typeof IC_LEFT) IC_RIGHT;
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
SEND
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
IC_LEFT()
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
This is used for passing parameters in registers;
\newline
move IC_LEFT to the next
available parameter register.
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
None
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
RECV
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
IC_RESULT()
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
This is used for receiving parameters passed in registers;
\newline
Move the values
in the next parameter register to IC_RESULT
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\size footnotesize
None
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\shape slanted
\size footnotesize
(some more have been added)
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
+\end_layout
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
-\layout Standard
+\begin_layout Standard
\shape slanted
\size footnotesize
in
\family typewriter
src/mcs51/gen.c
+\end_layout
\end_inset
</cell>
\end_inset
+\end_layout
-\layout Standard
-\begin_inset Note
-collapsed true
+\begin_layout Standard
+\begin_inset Note Note
+status collapsed
-\layout Standard
+\begin_layout Standard
In the original article Figure II was announced to be downloadable on
\shape italic
Circuit Cellar
\shape default
's web site.
ftp://ftp.circuitcellar.com/pub/Circuit_Cellar/2000/121/dutta.ZIP
+\end_layout
\end_inset
+\end_layout
-\layout Paragraph*
+\begin_layout Paragraph*
ICode Example
\begin_inset LatexCommand \index{iCode}
\end_inset
+\end_layout
-\layout Standard
+\begin_layout Standard
This section shows some details of iCode.
The example C code does not do anything useful; it is used as an example
to illustrate the intermediate code generated by the compiler.
+\end_layout
-\layout Verse
+\begin_layout Verse
\family typewriter
-1.\SpecialChar ~
+1.\InsetSpace ~
xdata int * p;
\newline
-2.\SpecialChar ~
+2.\InsetSpace ~
int gint;
\newline
-3.\SpecialChar ~
+3.\InsetSpace ~
/* This function does nothing useful.
It is used
\newline
-4.\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+4.\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
for the purpose of explaining iCode */
\newline
-5.\SpecialChar ~
+5.\InsetSpace ~
short function (data
int *x)
\newline
-6.\SpecialChar ~
+6.\InsetSpace ~
{
\newline
-7.\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-short i=10; \SpecialChar ~
-\SpecialChar ~
+7.\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+short i=10; \InsetSpace ~
+\InsetSpace ~
/* dead initialization eliminated */
\newline
-8.\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+8.\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
short sum=10;
/* dead initialization eliminated */
\newline
-9.\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+9.\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
short mul;
\newline
-10.\SpecialChar ~
-\SpecialChar ~
+10.\InsetSpace ~
+\InsetSpace ~
int j ;
\newline
-11.\SpecialChar ~
-\SpecialChar ~
+11.\InsetSpace ~
+\InsetSpace ~
while (*x) *x++
= *p++;
\newline
-12.\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+12.\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
sum = 0 ;
\newline
-13.\SpecialChar ~
-\SpecialChar ~
+13.\InsetSpace ~
+\InsetSpace ~
mul = 0;
\newline
-14.\SpecialChar ~
-\SpecialChar ~
+14.\InsetSpace ~
+\InsetSpace ~
/* compiler detects i,j to be induction
variables */
\newline
-15.\SpecialChar ~
-\SpecialChar ~
+15.\InsetSpace ~
+\InsetSpace ~
for (i = 0, j = 10 ; i < 10 ; i++, j
\family default
-
\begin_inset ERT
-status Collapsed
+status collapsed
-\layout Standard
+\begin_layout Standard
\backslash
/
+\end_layout
\end_inset
\family typewriter
) {
\newline
-16.\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+16.\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
sum += i;
\newline
-17.\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-mul += i * 3; \SpecialChar ~
-\SpecialChar ~
+17.\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+mul += i * 3; \InsetSpace ~
+\InsetSpace ~
/* this multiplication remains */
\newline
-18.\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+18.\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
gint +=
- j * 3;\SpecialChar ~
-\SpecialChar ~
+ j * 3;\InsetSpace ~
+\InsetSpace ~
/* this multiplication changed to addition */
\newline
-19.\SpecialChar ~
-\SpecialChar ~
+19.\InsetSpace ~
+\InsetSpace ~
}
\newline
-20.\SpecialChar ~
-\SpecialChar ~
+20.\InsetSpace ~
+\InsetSpace ~
return sum+mul;
\newline
-21.\SpecialChar ~
+21.\InsetSpace ~
}
+\end_layout
-\layout Standard
+\begin_layout Standard
In addition to the operands each iCode contains information about the filename
and line it corresponds to in the source file.
The first field in the listing should be interpreted as follows:
respectively.
\newline
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
Sample.c (5:1:0:0) _entry($9) :
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
Sample.c(5:2:1:0) proc _function [lr0:0]{function short}
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
Sample.c(11:3:2:0) iTemp0 [lr3:5]{_near * int}[r2] = recv
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
Sample.c(11:4:53:0) preHeaderLbl0($11) :
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
Sample.c(11:5:55:0) iTemp6 [lr5:16]{_near * int}[r0] := iTemp0 [lr3:5]{_near
* int}[r2]
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
Sample.c(11:6:5:1) _whilecontinue_0($1) :
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
Sample.c(11:7:7:1) iTemp4 [lr7:8]{int}[r2 r3] = @[iTemp6 [lr5:16]{_near *
int}[r0]]
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
Sample.c(11:8:8:1) if iTemp4 [lr7:8]{int}[r2 r3] == 0 goto _whilebreak_0($3)
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
Sample.c(11:9:14:1) iTemp7 [lr9:13]{_far * int}[DPTR] := _p [lr0:0]{_far
* int}
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
Sample.c(11:10:15:1) _p [lr0:0]{_far * int} = _p [lr0:0]{_far * int} + 0x2
{short}
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
Sample.c(11:13:18:1) iTemp10 [lr13:14]{int}[r2 r3] = @[iTemp7 [lr9:13]{_far
* int}[DPTR]]
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
Sample.c(11:14:19:1) *(iTemp6 [lr5:16]{_near * int}[r0]) := iTemp10 [lr13:14]{int
}[r2 r3]
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
Sample.c(11:15:12:1) iTemp6 [lr5:16]{_near * int}[r0] = iTemp6 [lr5:16]{_near
* int}[r0] + 0x2 {short}
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
Sample.c(11:16:20:1) goto _whilecontinue_0($1)
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
Sample.c(11:17:21:0)_whilebreak_0($3) :
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
Sample.c(12:18:22:0) iTemp2 [lr18:40]{short}[r2] := 0x0 {short}
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
Sample.c(13:19:23:0) iTemp11 [lr19:40]{short}[r3] := 0x0 {short}
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
Sample.c(15:20:54:0)preHeaderLbl1($13) :
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
Sample.c(15:21:56:0) iTemp21 [lr21:38]{short}[r4] := 0x0 {short}
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
Sample.c(15:22:57:0) iTemp23 [lr22:38]{int}[r5 r6] := 0xa {int}
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
Sample.c(15:23:58:0) iTemp17 [lr23:38]{int}[r7 r0] := 0x1e {int}
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
Sample.c(15:24:26:1)_forcond_0($4) :
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
Sample.c(15:25:27:1) iTemp13 [lr25:26]{char}[CC] = iTemp21 [lr21:38]{short}[r4]
< 0xa {short}
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
Sample.c(15:26:28:1) if iTemp13 [lr25:26]{char}[CC] == 0 goto _forbreak_0($7)
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
Sample.c(16:27:31:1) iTemp2 [lr18:40]{short}[r2] = iTemp2 [lr18:40]{short}[r2]
+ ITemp21 [lr21:38]{short}[r4]
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
Sample.c(17:29:33:1) iTemp15 [lr29:30]{short}[r1] = iTemp21 [lr21:38]{short}[r4]
* 0x3 {short}
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
Sample.c(17:30:34:1) iTemp11 [lr19:40]{short}[r3] = iTemp11 [lr19:40]{short}[r3]
+ iTemp15 [lr29:30]{short}[r1]
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
Sample.c(18:32:36:1:1) iTemp17 [lr23:38]{int}[r7 r0]= iTemp17 [lr23:38]{int}[r7
r0]- 0x3 {short}
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
Sample.c(18:33:37:1) _gint [lr0:0]{int} = _gint [lr0:0]{int} + iTemp17 [lr23:38]{
int}[r7 r0]
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
Sample.c(15:36:42:1) iTemp21 [lr21:38]{short}[r4] = iTemp21 [lr21:38]{short}[r4]
+ 0x1 {short}
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
Sample.c(15:37:45:1) iTemp23 [lr22:38]{int}[r5 r6]= iTemp23 [lr22:38]{int}[r5
r6]- 0x1 {short}
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
Sample.c(19:38:47:1) goto _forcond_0($4)
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
Sample.c(19:39:48:0)_forbreak_0($7) :
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
Sample.c(20:40:49:0) iTemp24 [lr40:41]{short}[DPTR] = iTemp2 [lr18:40]{short}[r2]
+ ITemp11 [lr19:40]{short}[r3]
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
Sample.c(20:41:50:0) ret iTemp24 [lr40:41]{short}
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
Sample.c(20:42:51:0)_return($8) :
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
Sample.c(20:43:52:0) eproc _function [lr0:0]{ ia0 re0 rm0}{function short}
Finally the code generated for this function:
\newline
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
.area DSEG (DATA)
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
_p::
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
.ds 2
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
_gint::
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
.ds 2
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
; sample.c 5
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
; ----------------------------------------------
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
; function function
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
; ----------------------------------------------
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
_function:
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
; iTemp0 [lr3:5]{_near * int}[r2] = recv
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
mov r2,dpl
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
; iTemp6 [lr5:16]{_near * int}[r0] := iTemp0 [lr3:5]{_near * int}[r2]
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
mov ar0,r2
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
;_whilecontinue_0($1) :
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
00101$:
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
; iTemp4 [lr7:8]{int}[r2 r3] = @[iTemp6 [lr5:16]{_near * int}[r0]]
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
; if iTemp4 [lr7:8]{int}[r2 r3] == 0 goto _whilebreak_0($3)
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
mov ar2,@r0
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
inc r0
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
mov ar3,@r0
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
dec r0
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
mov a,r2
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
orl a,r3
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
jz 00103$
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
00114$:
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
; iTemp7 [lr9:13]{_far * int}[DPTR] := _p [lr0:0]{_far * int}
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
mov dpl,_p
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
mov dph,(_p + 1)
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
; _p [lr0:0]{_far * int} = _p [lr0:0]{_far * int} + 0x2 {short}
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
mov a,#0x02
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
add a,_p
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
mov _p,a
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
clr a
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
addc a,(_p + 1)
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
mov (_p + 1),a
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
; iTemp10 [lr13:14]{int}[r2 r3] = @[iTemp7 [lr9:13]{_far * int}[DPTR]]
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
movx a,@dptr
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
mov r2,a
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
inc dptr
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
movx a,@dptr
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
mov r3,a
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
; *(iTemp6 [lr5:16]{_near * int}[r0]) := iTemp10 [lr13:14]{int}[r2 r3]
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
mov @r0,ar2
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
inc r0
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
mov @r0,ar3
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
; iTemp6 [lr5:16]{_near * int}[r0] =
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
; iTemp6 [lr5:16]{_near * int}[r0] +
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
; 0x2 {short}
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
inc r0
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
; goto _whilecontinue_0($1)
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
sjmp 00101$
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
; _whilebreak_0($3) :
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
00103$:
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
; iTemp2 [lr18:40]{short}[r2] := 0x0 {short}
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
mov r2,#0x00
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
; iTemp11 [lr19:40]{short}[r3] := 0x0 {short}
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
mov r3,#0x00
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
; iTemp21 [lr21:38]{short}[r4] := 0x0 {short}
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
mov r4,#0x00
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
; iTemp23 [lr22:38]{int}[r5 r6] := 0xa {int}
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
mov r5,#0x0A
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
mov r6,#0x00
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
; iTemp17 [lr23:38]{int}[r7 r0] := 0x1e {int}
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
mov r7,#0x1E
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
mov r0,#0x00
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
; _forcond_0($4) :
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
00104$:
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
; iTemp13 [lr25:26]{char}[CC] = iTemp21 [lr21:38]{short}[r4] < 0xa {short}
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
; if iTemp13 [lr25:26]{char}[CC] == 0 goto _forbreak_0($7)
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
clr c
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
mov a,r4
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
xrl a,#0x80
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
subb a,#0x8a
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
jnc 00107$
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
00115$:
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
; iTemp2 [lr18:40]{short}[r2] = iTemp2 [lr18:40]{short}[r2] +
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
; iTemp21 [lr21:38]{short}[r4]
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
mov a,r4
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
add a,r2
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
mov r2,a
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
; iTemp15 [lr29:30]{short}[r1] = iTemp21 [lr21:38]{short}[r4] * 0x3 {short}
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
mov b,#0x03
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
mov a,r4
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
mul ab
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
mov r1,a
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
; iTemp11 [lr19:40]{short}[r3] = iTemp11 [lr19:40]{short}[r3] +
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
; iTemp15 [lr29:30]{short}[r1]
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
add a,r3
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
mov r3,a
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
; iTemp17 [lr23:38]{int}[r7 r0]= iTemp17 [lr23:38]{int}[r7 r0]- 0x3 {short}
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
mov a,r7
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
add a,#0xfd
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
mov r7,a
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
mov a,r0
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
addc a,#0xff
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
mov r0,a
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
; _gint [lr0:0]{int} = _gint [lr0:0]{int} + iTemp17 [lr23:38]{int}[r7 r0]
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
mov a,r7
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
add a,_gint
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
mov _gint,a
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
mov a,r0
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
addc a,(_gint + 1)
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
mov (_gint + 1),a
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
; iTemp21 [lr21:38]{short}[r4] = iTemp21 [lr21:38]{short}[r4] + 0x1 {short}
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
inc r4
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
; iTemp23 [lr22:38]{int}[r5 r6]= iTemp23 [lr22:38]{int}[r5 r6]- 0x1 {short}
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
dec r5
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
cjne r5,#0xff,00104$
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
dec r6
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
; goto _forcond_0($4)
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
sjmp 00104$
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
; _forbreak_0($7) :
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
00107$:
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
; ret iTemp24 [lr40:41]{short}
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
mov a,r3
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
add a,r2
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
mov dpl,a
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
; _return($8) :
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
00108$:
+\end_layout
-\layout Standard
+\begin_layout Standard
\size footnotesize
-\SpecialChar ~
-\SpecialChar ~
+\InsetSpace ~
+\InsetSpace ~
ret
\newline
+\end_layout
-\layout Section
+\begin_layout Section
A few words about basic block successors, predecessors and dominators
+\end_layout
-\layout Standard
+\begin_layout Standard
Successors are basic blocks
\begin_inset LatexCommand \index{Basic blocks}
blocks that WILL execute before reaching this basic block.
\newline
+\end_layout
-\layout Standard
+\begin_layout Standard
[basic block 1]
+\end_layout
-\layout Standard
+\begin_layout Standard
if (something)
+\end_layout
-\layout Standard
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\begin_layout Standard
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
[basic block 2]
+\end_layout
-\layout Standard
+\begin_layout Standard
else
+\end_layout
-\layout Standard
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+\begin_layout Standard
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
+\InsetSpace ~
[basic block 3]
+\end_layout
-\layout Standard
+\begin_layout Standard
[basic block 4]
\newline
+\end_layout
-\layout Standard
+\begin_layout Standard
a) succList of [BB2] = [BB4], of [BB3] = [BB4], of [BB1] = [BB2,BB3]
+\end_layout
-\layout Standard
+\begin_layout Standard
b) predList of [BB2] = [BB1], of [BB3] = [BB1], of [BB4] = [BB2,BB3]
+\end_layout
-\layout Standard
+\begin_layout Standard
c) domVect of [BB4] = BB1 ...
here we are not sure if BB2 or BB3 was executed but we are SURE that BB1
was executed.
+\end_layout
-\layout Chapter
+\begin_layout Chapter
Acknowledgments
+\end_layout
-\layout Standard
+\begin_layout Standard
\begin_inset LatexCommand \url{http://sdcc.sourceforge.net#Who}
\end_inset
\newline
\emph on
-Also thanks to Sourceforge
+Thanks to Sourceforge
\begin_inset LatexCommand \url{http://www.sf.net}
\end_inset
which has hosted the project since 1999 and donates significant download
- bandwidth and probably more than
-\begin_inset ERT
-status Collapsed
-
-\layout Standard
-
-$10^{13}$
-
-\end_inset
+ bandwidth.
+\emph default
-CPU cycles per day.
\newline
-
-\begin_inset Note
-collapsed false
-
-\layout Standard
-more than 10^13 is an estimate: on my Athlon 2800+ it takes about (0.5+6.5+20)
- minutes for (configure+make+regression test), and there is (i386, amd64,
- alpha, ppc64, (mingw32), sparc, macosx).
-
-\end_inset
+\newline
+\emph on
+Also thanks to all SDCC Distributed Compile Farm members for donating CPU
+ cycles and bandwidth for snapshot builds.
+\newline
+\end_layout
-\layout Standard
+\begin_layout Standard
This document was initially written by Sandeep Dutta
+\end_layout
-\layout Standard
+\begin_layout Standard
All product names mentioned herein may be trademarks
\begin_inset LatexCommand \index{Trademarks}
of their respective companies.
+\end_layout
-\layout Section*
+\begin_layout Section*
Alphabetical index
+\end_layout
-\layout Standard
+\begin_layout Standard
To avoid confusion, the installation and building options for SDCC itself
(chapter 2) are not part of the index.
+\end_layout
-\layout Standard
+\begin_layout Standard
\begin_inset LatexCommand \printindex{}
\end_inset
+\end_layout
-\the_end
+\end_body
+\end_document