\lyxformat 221
\textclass book
\begin_preamble
+\pdfoptionpdfminorversion=3
\usepackage[
pdftitle={SDCC Compiler User Guide},
pdfauthor={SDCC development team},
pdfsubject={installation, user manual},
- pdfkeywords={8032, 8051, ansi, c, compiler, CPU, DS390,
- embedded, GPL, HC08, manual, mcs51, PIC, Z80},
+ pdfkeywords={8032 8051 ansi c compiler CPU DS390
+ embedded GPL HC08 manual mcs51 microcontroller PIC Z80},
colorlinks=true,
linkcolor=blue] {hyperref}
%
\size normal
-SDCC 2.3.7
+SDCC 2.5.1
\size footnotesize
\newline
\emph on
C
\emph default
-ompiler) is a Freeware, retargettable, optimizing ANSI-C compiler by
+ompiler) is an open source, retargettable, optimizing ANSI-C compiler by
+
\series bold
Sandeep Dutta
\series default
\end_inset
-, etc.), Dallas DS80C390 variants, Motorola HC08 and Zilog Z80 based MCUs.
+, etc.), Dallas DS80C390 variants, Freescale (formerly Motorola) HC08 and
+ Zilog Z80 based MCUs.
It can be retargetted for other microprocessors, support for Microchip
PIC, Atmel AVR is under development.
The entire source code for the compiler is distributed under GPL.
- SDCC uses ASXXXX & ASLINK, a Freeware, retargettable assembler & linker.
+ SDCC uses ASXXXX
+\begin_inset LatexCommand \index{asXXXX (as-gbz80, as-hc08, asx8051, as-z80)}
+
+\end_inset
+
+ & ASLINK
+\begin_inset LatexCommand \index{aslink}
+
+\end_inset
+
+, an open source retargettable assembler & linker.
SDCC has extensive language extensions suitable for utilizing various microcont
rollers and underlying hardware effectively.
All packages used in this compiler system are
\emph on
-opensource
+open source
\emph default
and
\emph on
\layout Section
Compatibility with previous versions
+\begin_inset LatexCommand \index{Compatibility with previous versions}
+
+\end_inset
+
+
\layout Standard
This version has numerous bug fixes compared with the previous version.
\layout Itemize
short is now equivalent to int (16 bits), it used to be equivalent to char
- (8 bits) which is not ANSI compliant
+ (8 bits) which is not ANSI compliant.
\layout Itemize
the default directory for gcc-builds where include, library and documentation
- files are stored is now in /usr/local/share
+ files are stored is now in /usr/local/share.
\layout Itemize
char type parameters to vararg functions are casted to int unless explicitly
/
\end_inset
--regextend has been removed
+-regextend has been removed.
\layout Itemize
option -
/
\end_inset
--noregparms has been removed
+-noregparms has been removed.
\layout Itemize
option -
/
\end_inset
--stack-after-data has been removed
+-stack-after-data has been removed.
+\layout Itemize
+
+bit
+\begin_inset LatexCommand \index{bit}
+
+\end_inset
+
+ and sbit
+\begin_inset LatexCommand \index{sbit}
+
+\end_inset
+
+
+\begin_inset LatexCommand \index{\_\_sbit}
+
+\end_inset
+
+ types now consistently behave like the C99 _Bool type with respect to type
+ conversion
+\begin_inset LatexCommand \index{type conversion}
+
+\end_inset
+
+
+\begin_inset LatexCommand \index{type promotion}
+
+\end_inset
+
+.
+ The most common incompatibility resulting from this change is related to
+ bit toggling
+\begin_inset LatexCommand \index{Bit toggling}
+
+\end_inset
+
+ idioms, e.g.:
+\newline
+
+\family typewriter
+\SpecialChar ~
+\SpecialChar ~
+bit b;
+\newline
+\SpecialChar ~
+\SpecialChar ~
+b = ~b; /* equivalent to b=1 instead of toggling b */
+\newline
+\SpecialChar ~
+\SpecialChar ~
+b = !b; /* toggles b */
+\newline
+
+\family default
+In previous versions, both forms would have toggled the bit.
\layout Standard
Web links to other SDCC related sites can also be found here.
This document can be found in the DOC directory of the source package as
a text or HTML file.
+ A pdf version of this document is available at
+\begin_inset LatexCommand \url{http://sdcc.sourceforge.net/doc/sdccman.pdf}
+
+\end_inset
+
+.
Some of the other tools (simulator and assembler) included with SDCC contain
their own documentation and can be found in the source distribution.
If you want the latest unreleased software, the complete source package
\newline
\family default
-If you can think of some more, please see the chapter
+If you can think of some more, please see the section
\begin_inset LatexCommand \ref{sub:Requesting-Features}
\end_inset
\layout Standard
Of course this doesn't change the search paths compiled into the binaries.
+\newline
+
+\newline
+Moreover the install path can be changed by defining DESTDIR
+\begin_inset LatexCommand \index{DESTDIR}
+
+\end_inset
+
+:
+\layout LyX-Code
+
+make install DESTDIR=$(HOME)/sdcc.rpm/
+\layout Standard
+
+Please note that DESTDIR must have a trailing slash!
\layout Section
Search Paths
And use an editor which can handle LF-only line endings.
Make sure not to commit files with windows line endings.
The tabulator spacing
-\begin_inset LatexCommand \index{tabulator spacing (8)}
+\begin_inset LatexCommand \index{tabulator spacing (8 columns)}
\end_inset
used in the project is 8.
+ Although a tabulator spacing of 8 is a sensible choice for programmers
+ (it's a power of 2 and allows to display 8/16 bit signed variables without
+ loosing columns) the plan is to move towards using only spaces in the source.
\layout Subsection
Building SDCC Using Microsoft Visual C++ 6.0/NET (MSVC)
\newline
+\newline
+WARNING: Visual studio is very picky with line terminations; it expects
+ the 0x0d, 0x0a DOS style line endings, not the 0x0a Unix style line endings.
+ If you are getting a message such as "This makefile was not generated by
+ Developer Studio etc.
+ etc.
+\begin_inset Quotes srd
+\end_inset
+
+ when opening the sdcc.dsw workspace or any of the *.dsp projects, then you
+ need to convert the Unix style line endings to DOS style line endings.
+ To do so you can use the
+\begin_inset Quotes sld
+\end_inset
+
+unix2dos
+\begin_inset Quotes srd
+\end_inset
+
+ utility freely available on the internet.
+ Doug Hawkins reported in the sdcc-user list that this works:
+\newline
+
+\newline
+C:
+\backslash
+Programming
+\backslash
+SDCC> unix2dos sdcc.dsw
+\newline
+C:
+\backslash
+Programming
+\backslash
+SDCC> for /R %I in (*.dsp) do @unix2dos "%I"
+\newline
+
\newline
In order to build SDCC with MSVC you need win32 executables of bison.exe,
flex.exe, and gawk.exe.
from the sdcc directory.
\layout Subsection
-Windows Install Using a Binary Package
-\begin_inset LatexCommand \label{sub:Windows-Install}
-
-\end_inset
-
-
+Windows Install Using a ZIP Package
\layout Enumerate
-Download the binary package from
-\begin_inset LatexCommand \url{http://sdcc.sourceforge.net/snap.php}
+Download the binary zip package from
+\begin_inset LatexCommand \url{http://sdcc.sf.net/snap.php}
\end_inset
Adjust your environment variable PATH to include the location of the bin
directory or start sdcc using the full path.
+\layout Subsection
+
+Windows Install Using the Setup Program
+\begin_inset LatexCommand \label{sub:Windows-Install}
+
+\end_inset
+
+
+\layout Standard
+
+Download the setup program
+\emph on
+sdcc-x.y.z-setup.exe
+\emph default
+ for an official release from
+\newline
+
+\begin_inset LatexCommand \url{http://sf.net/project/showfiles.php?group_id=599}
+
+\end_inset
+
+ or a setup program for one of the snapshots
+\emph on
+sdcc_yyyymmdd_setup.exe
+\emph default
+ from
+\begin_inset LatexCommand \url{http://sdcc.sf.net/snap.php}
+
+\end_inset
+
+ and execute it.
+ A windows typical installer will guide you through the installation process.
\layout Section
Building the Documentation
\layout Standard
-If the necessary tools (LyX, LaTeX, latex2html) are installed it is as easy
+If the necessary tools (LyX, LaTeX, LaTeX2HTML) are installed it is as easy
as changing into the doc directory and typing
\family sans
\series bold
\family default
\series default
there.
- You're invited to make changes and additions to this manual.
+ You're invited to make changes and additions to this manual (sdcc/doc/sdccman.ly
+x).
Using LyX
-\begin_inset LatexCommand \url{www.lyx.org}
+\begin_inset LatexCommand \url{http://www.lyx.org}
\end_inset
as editor this is straightforward.
- If you want to avoid installing the tools you will have some success with
- a bootable Knoppix CD
-\begin_inset LatexCommand \url{http://www.knoppix.net}
-
-\end_inset
-
-.
Prebuilt documentation in html and pdf format is available from
-\begin_inset LatexCommand \url{http://sdcc.sourceforge.net/snap.php}
+\begin_inset LatexCommand \url{http://sdcc.sf.net/snap.php}
\end_inset
Currently reading the document in pdf format is recommended, as for unknown
reason the hyperlinks are working there whereas in the html version they
- are not.
+ are not
+\begin_inset Foot
+collapsed false
+
+\layout Standard
+
+If you should know why please drop us a note
+\end_inset
+
+.
+
+\newline
+You'll find the pdf version
+\begin_inset LatexCommand \index{PDF version of this document}
+
+\end_inset
+
+ at
+\begin_inset LatexCommand \url{http://sdcc.sf.net/doc/sdccman.pdf}
+
+\end_inset
+
+.
+
+\newline
+A html version
+\begin_inset LatexCommand \index{HTML version of this document}
+
+\end_inset
+
+ should be online at
+\begin_inset LatexCommand \url{http://sdcc.sf.net/doc/sdccman.html/index.html}
+
+\end_inset
+
+.
\newline
This documentation is in some aspects different from a commercial documentation:
currently matches SDCC for mcs51 and DS390 best and does give too few informati
on about f.e.
- Z80, PIC and HC08.
+ Z80, PIC14, PIC16 and HC08.
\layout Itemize
There are many references pointing away from this documentation.
Don't let this distract you.
If there f.e.
was a reference like
-\begin_inset LatexCommand \url{www.opencores.org}
+\begin_inset LatexCommand \url{http://www.opencores.org}
\end_inset
\end_inset
- is a freeware, opensource simulator developed by Daniel Drotos (
-\begin_inset LatexCommand \url{mailto:drdani@mazsola.iit.uni-miskolc.hu}
-
-\end_inset
-
-).
+ is a freeware, opensource simulator developed by Daniel Drotos.
The simulator is built as part of the build process.
For more information visit Daniel's web site at:
\begin_inset LatexCommand \url{http://mazsola.iit.uni-miskolc.hu/~drdani/embedded/s51}
\family default
\shape default
-\begin_inset LatexCommand \index{srecord (tool)}
+\begin_inset LatexCommand \index{srecord (bin, hex, ... tool)}
\end_inset
).
- Both formats are documented in the the documentation of srecord
-\begin_inset LatexCommand \index{srecord (tool)}
+ Both formats are documented in the documentation of srecord
+\begin_inset LatexCommand \index{srecord (bin, hex, ... tool)}
\end_inset
\layout Itemize
sourcefile.adb
-\begin_inset LatexCommand \index{.adb}
+\begin_inset LatexCommand \index{<file>.adb}
\end_inset
- An intermediate file containing debug information needed to create the
.cdb file (with -
\begin_inset ERT
-status Collapsed
+status Open
\layout Standard
\end_inset
-debug) containing debug information.
- The format is documented in cdbfileformat.pdf.
+ The format is documented in cdbfileformat.pdf
\layout Itemize
sourcefile.
file specified in the command line, since the linkage editor processes
file in the order they are presented to it.
The linker is invoked from SDCC using a script file with extension .lnk
-\begin_inset LatexCommand \index{.lnk}
+\begin_inset LatexCommand \index{<file>.lnk}
\end_inset
for how to create a
\emph on
.lib
-\begin_inset LatexCommand \index{.lib}
+\begin_inset LatexCommand \index{<file>.lib}
\end_inset
libsdcc.lib
\emph default
in the directory <installdir>/share/lib/small.
-\layout Section
+\layout Subsection
-Command Line Options
-\begin_inset LatexCommand \index{Command Line Options}
+Using sdcclib to Create and Manage Libraries
+\begin_inset LatexCommand \index{sdcclib}
\end_inset
-\layout Subsection
+\layout Standard
-Processor Selection Options
-\begin_inset LatexCommand \index{Options processor selection}
+Alternatively, instead of having a .rel file for each entry on the library
+ file as described in the preceding section, sdcclib can be used to embed
+ all the modules belonging to such library in the library file itself.
+ This results in a larger library file, but it greatly reduces the number
+ of disk files accessed by the linker.
+ Additionally, the packed library file contains an index of all include
+ modules and symbols that significantly speeds up the linking process.
+ To display a list of options supported by sdcclib type:
+\newline
-\end_inset
+\layout Standard
-\begin_inset LatexCommand \index{Processor selection options}
+\family sans
+\series bold
+sdcclib -?
+\begin_inset LatexCommand \index{sdcclib}
\end_inset
-\layout List
-\labelwidthstring 00.00.0000
+\newline
+\newline
-\series bold
--mmcs51
-\begin_inset LatexCommand \index{-mmcs51}
+\family default
+\series default
+To create a new library file, start by compiling all the required modules.
+ For example:
+\newline
-\end_inset
+\layout Standard
-\series default
- Generate code for the Intel MCS51
-\begin_inset LatexCommand \index{MCS51}
+\family sans
+\series bold
+sdcc -c _divsint.c
+\layout Standard
-\end_inset
- family of processors.
- This is the default processor target.
-\layout List
-\labelwidthstring 00.00.0000
+\family sans
+\series bold
+sdcc -c _divuint.c
+\layout Standard
+\family sans
\series bold
--mds390
-\begin_inset LatexCommand \index{-mds390}
+sdcc -c _modsint.c
+\layout Standard
-\end_inset
+\family sans
+\series bold
+sdcc -c _moduint.c
+\layout Standard
-\series default
- Generate code for the Dallas DS80C390
-\begin_inset LatexCommand \index{DS80C390}
-\end_inset
+\family sans
+\series bold
+sdcc -c _mulint.c
+\newline
- processor.
-\layout List
-\labelwidthstring 00.00.0000
+\layout Standard
+
+This will create files _divsint.rel, _divuint.rel, _modsint.rel, _moduint.rel,
+ and _mulint.rel.
+ The next step is to add the .rel files to the library file:
+\newline
+
+\layout Standard
+\family sans
\series bold
--mds400
-\begin_inset LatexCommand \index{-mds400}
+sdcclib libint.lib _divsint.rel
+\family default
+
+\begin_inset LatexCommand \index{sdcclib}
\end_inset
-\series default
- Generate code for the Dallas DS80C400
-\begin_inset LatexCommand \index{DS80C400}
+\layout Standard
-\end_inset
- processor.
-\layout List
-\labelwidthstring 00.00.0000
+\family sans
+\series bold
+sdcclib libint.lib _divuint.rel
+\layout Standard
+\family sans
\series bold
--mhc08
-\begin_inset LatexCommand \index{-mhc08}
+sdcclib libint.lib _modsint.rel
+\layout Standard
-\end_inset
+
+\family sans
+\series bold
+sdcclib libint.lib _moduint.rel
+\layout Standard
+\family sans
+\series bold
+sdcclib libint.lib _mulint.rel
\series default
- Generate code for the Motorola HC08
-\begin_inset LatexCommand \index{HC08}
-\end_inset
+\newline
- family of processors (added Oct 2003).
-\layout List
-\labelwidthstring 00.00.0000
+\layout Standard
+
+If the file already exists in the library, it will be replaced.
+ To see what modules and symbols are included in the library, options -s
+ and -m are available.
+ For example:
+\newline
+\newline
+\family sans
\series bold
--mz80
-\begin_inset LatexCommand \index{-mz80}
+sdcclib -s libint.lib
+\family default
+
+\begin_inset LatexCommand \index{sdcclib}
+
+\end_inset
+
+
+\newline
+
+\family typewriter
+\series default
+_divsint.rel:
+\layout Standard
+
+
+\family typewriter
+__divsint_a_1_1
+\layout Standard
+
+
+\family typewriter
+__divsint_PARM_2
+\layout Standard
+
+
+\family typewriter
+__divsint
+\newline
+_divuint.rel:
+\layout Standard
+
+
+\family typewriter
+__divuint_a_1_1
+\layout Standard
+
+
+\family typewriter
+__divuint_PARM_2
+\layout Standard
+
+
+\family typewriter
+__divuint_reste_1_1
+\layout Standard
+
+
+\family typewriter
+__divuint_count_1_1
+\layout Standard
+
+
+\family typewriter
+__divuint
+\newline
+_modsint.rel:
+\layout Standard
+
+
+\family typewriter
+__modsint_a_1_1
+\layout Standard
+
+
+\family typewriter
+__modsint_PARM_2
+\layout Standard
+
+
+\family typewriter
+__modsint
+\newline
+_moduint.rel:
+\layout Standard
+
+
+\family typewriter
+__moduint_a_1_1
+\layout Standard
+
+
+\family typewriter
+__moduint_PARM_2
+\layout Standard
+
+
+\family typewriter
+__moduint_count_1_1
+\layout Standard
+
+
+\family typewriter
+__moduint
+\newline
+_mulint.rel:
+\layout Standard
+
+
+\family typewriter
+__mulint_PARM_2
+\layout Standard
+
+
+\family typewriter
+__mulint
+\family default
+\series bold
+
+\newline
+
+\layout Standard
+
+If the source files are compiled using -
+\begin_inset ERT
+status Open
+
+\layout Standard
+
+\backslash
+/
+\end_inset
+
+-debug
+\begin_inset LatexCommand \index{-\/-debug}
+
+\end_inset
+
+, the corresponding debug information file .adb will be include in the library
+ file as well.
+ The library files created with sdcclib are plain text files, so they can
+ be viewed with a text editor.
+ It is not recomended to modify a library file created with sdcclib using
+ a text editor, as there are file indexes numbers located accross the file
+ used by the linker to quickly locate the required module to link.
+ Once a .rel file (as well as a .adb file) is added to a library using sdcclib,
+ it can be safely deleted, since all the information required for linking
+ is embedded in the library file itself.
+ Library files created using sdcclib are used as described in the preceding
+ sections.
+\layout Section
+
+Command Line Options
+\begin_inset LatexCommand \index{Command Line Options}
+
+\end_inset
+
+
+\layout Subsection
+
+Processor Selection Options
+\begin_inset LatexCommand \index{Options processor selection}
+
+\end_inset
+
+
+\begin_inset LatexCommand \index{Processor selection options}
+
+\end_inset
+
+
+\layout List
+\labelwidthstring 00.00.0000
+
+
+\series bold
+-mmcs51
+\begin_inset LatexCommand \index{-mmcs51}
+
+\end_inset
+
+
+\series default
+ Generate code for the Intel MCS51
+\begin_inset LatexCommand \index{MCS51}
+
+\end_inset
+
+ family of processors.
+ This is the default processor target.
+\layout List
+\labelwidthstring 00.00.0000
+
+
+\series bold
+-mds390
+\begin_inset LatexCommand \index{-mds390}
+
+\end_inset
+
+
+\series default
+ Generate code for the Dallas DS80C390
+\begin_inset LatexCommand \index{DS80C390}
+
+\end_inset
+
+ processor.
+\layout List
+\labelwidthstring 00.00.0000
+
+
+\series bold
+-mds400
+\begin_inset LatexCommand \index{-mds400}
+
+\end_inset
+
+
+\series default
+ Generate code for the Dallas DS80C400
+\begin_inset LatexCommand \index{DS80C400}
+
+\end_inset
+
+ processor.
+\layout List
+\labelwidthstring 00.00.0000
+
+
+\series bold
+-mhc08
+\begin_inset LatexCommand \index{-mhc08}
+
+\end_inset
+
+
+\series default
+ Generate code for the Freescale/Motorola HC08
+\begin_inset LatexCommand \index{HC08}
+
+\end_inset
+
+ family of processors.
+\layout List
+\labelwidthstring 00.00.0000
+
+
+\series bold
+-mz80
+\begin_inset LatexCommand \index{-mz80}
\end_inset
\end_inset
processor (In development, not complete).
- AVR users should probably have a look at avr-gcc
-\begin_inset LatexCommand \url{ http://savannah.nongnu.org/download/avr-libc/snapshots/}
+ AVR users should probably have a look at winavr
+\begin_inset LatexCommand \url{http://sourceforge.net/projects/winavr}
+
+\end_inset
+
+ or
+\begin_inset LatexCommand \url{http://www.avrfreaks.net/index.php?name=PNphpBB2&file=index}
\end_inset
\end_inset
+\begin_inset LatexCommand \index{sdcpp (preprocessor)}
+
+\end_inset
+
+
\layout List
\labelwidthstring 00.00.0000
\end_inset
...
- Pass the preprocessorOption to the preprocessor.
+ Pass the preprocessorOption to the preprocessor
+\family typewriter
+sdcpp
+\family default
+
+\begin_inset LatexCommand \index{sdcpp (preprocessor)}
+
+\end_inset
+
+.
+ SDCC uses an adapted version of the preprocessor cpp of the GNU Compiler
+ Collection (gcc), if you need more dedicated options please refer to the
+ documentation at
+\begin_inset LatexCommand \htmlurl{http://www.gnu.org/software/gcc/onlinedocs/}
+
+\end_inset
+
+.
\layout Subsection
Linker Options
The provided value should not overlap any other memory areas such as used
register banks or the data segment and with enough space for the current
application.
+ The
+\series bold
+-
+\begin_inset ERT
+status Collapsed
+
+\layout Standard
+
+\backslash
+/
+\end_inset
+
+-pack-iram
+\series default
+\SpecialChar ~
+
+\begin_inset LatexCommand \index{-\/-pack-iram}
+
+\end_inset
+
+ option (which is now a default setting) will override this setting, so
+ you should also specify the
+\series bold
+-
+\begin_inset ERT
+status Collapsed
+
+\layout Standard
+
+\backslash
+/
+\end_inset
+
+-no-pack-iram
+\series default
+\SpecialChar ~
+
+\begin_inset LatexCommand \index{-\/-no-pack-iram}
+
+\end_inset
+
+ option if you need to manually place the stack.
\layout List
\labelwidthstring 00.00.0000
This is the default option.
The format itself is documented in the documentation of srecord
-\begin_inset LatexCommand \index{srecord (tool)}
+\begin_inset LatexCommand \index{srecord (bin, hex, ... tool)}
\end_inset
\series bold
--Wl\SpecialChar ~
-linkOption[,linkOption]
-\series default
-
+-
+\begin_inset ERT
+status Collapsed
+
+\layout Standard
+
+\backslash
+/
+\end_inset
+
+-out-fmt-elf
+\begin_inset LatexCommand \index{-\/-out-fmt-s19}
+
+\end_inset
+
+
+\bar under
+
+\series default
+\bar default
+The linker output (final object code) is in ELF format
+\begin_inset LatexCommand \index{ELF format}
+
+\end_inset
+
+.
+ (Currently only supported for the HC08 processors)
+\layout List
+\labelwidthstring 00.00.0000
+
+
+\series bold
+-Wl\SpecialChar ~
+linkOption[,linkOption]
+\series default
+
\begin_inset LatexCommand \index{-Wl linkOption[,linkOption]}
\end_inset
Causes the linker to check if the code memory usage is within limits of
the given value.
+\layout List
+\labelwidthstring 00.00.0000
+
+
+\series bold
+-
+\begin_inset ERT
+status Collapsed
+
+\layout Standard
+
+\backslash
+/
+\end_inset
+
+-stack-size
+\series default
+\SpecialChar ~
+<Value>
+\begin_inset LatexCommand \index{-\/-stack-size <Value>}
+
+\end_inset
+
+ Causes the linker to check if there is at minimum <Value> bytes for stack.
+\layout List
+\labelwidthstring 00.00.0000
+
+
+\series bold
+-
+\begin_inset ERT
+status Collapsed
+
+\layout Standard
+
+\backslash
+/
+\end_inset
+
+-pack-iram
+\series default
+\SpecialChar ~
+
+\begin_inset LatexCommand \index{-\/-pack-iram}
+
+\end_inset
+
+ Causes the linker to use unused register banks for data variables and pack
+ data, idata and stack together.
+ This is the default now.
+\layout List
+\labelwidthstring 00.00.0000
+
+
+\series bold
+-
+\begin_inset ERT
+status Collapsed
+
+\layout Standard
+
+\backslash
+/
+\end_inset
+
+-no-pack-iram
+\series default
+\SpecialChar ~
+
+\begin_inset LatexCommand \index{-\/-no-pack-iram}
+
+\end_inset
+
+ Causes the linker to use old style for allocating memory areas.
\layout Subsection
DS390 / DS400 Options
\layout Subsection
-PIC Options
-\begin_inset LatexCommand \index{Options PIC}
-
-\end_inset
-
-
-\begin_inset LatexCommand \index{PIC options}
-
-\end_inset
-
-
-\layout List
-\labelwidthstring 00.00.0000
-
-
-\series bold
--
-\begin_inset ERT
-status Collapsed
-
-\layout Standard
-
-\backslash
-/
-\end_inset
-
--gen-banksel
-\begin_inset LatexCommand \index{-\/-gen-banksel}
-
-\end_inset
-
-
-\series default
- enable the generation of banksel assembler directives in the PIC16 port.
-\layout Subsection
-
Z80 Options
\begin_inset LatexCommand \index{Options Z80}
\series default
Will not do global subexpression elimination, this option may be used when
the compiler creates undesirably large stack/data spaces to store compiler
- temporaries.
+ temporaries (
+\emph on
+s
+\emph default
+pill
+\emph on
+loc
+\emph default
+ations, sloc
+\begin_inset LatexCommand \index{sloc (spill location)}
+
+\end_inset
+
+).
A warning message will be generated when this happens and the compiler
will indicate the number of extra bytes it allocated.
It is recommended that this option NOT be used, #pragma\SpecialChar ~
\series default
Will not do loop invariant optimizations, this may be turned off for reasons
explained for the previous option.
- For more details of loop optimizations performed see section Loop Invariants.
+ For more details of loop optimizations performed see Loop Invariants in
+ section
+\begin_inset LatexCommand \ref{sub:Loop-Optimizations}
+
+\end_inset
+
+.
It is recommended that this option NOT be used, #pragma\SpecialChar ~
noinvariant
\begin_inset LatexCommand \index{\#pragma noinvariant}
\series default
Will not memcpy initialized data from code space into xdata space.
- This saves a few bytes in code space if you don't have initialized data.
+ This saves a few bytes in code space if you don't have initialized data
+\begin_inset LatexCommand \index{Variable initialization}
+
+\end_inset
+
+.
\layout List
\labelwidthstring 00.00.0000
\series default
- Pass the inline assembler code through the peep hole optimizer.
+ Pass the inline assembler code through the peep hole optimizer.
This can cause unexpected changes to inline assembler code, please go through
the peephole optimizer
\begin_inset LatexCommand \index{Peephole optimizer}
rules defined in the source file tree '<target>/peeph.def' before using
this option.
+\layout List
+\labelwidthstring 00.00.0000
+
+
+\series bold
+-
+\begin_inset ERT
+status Collapsed
+
+\layout Standard
+
+\backslash
+/
+\end_inset
+
+-opt-code-speed
+\begin_inset LatexCommand \index{-\/-opt-code-speed}
+
+\end_inset
+
+
+\series default
+ The compiler will optimize code generation towards fast code, possibly
+ at the expense of code size.
+\layout List
+\labelwidthstring 00.00.0000
+
+
+\series bold
+-
+\begin_inset ERT
+status Collapsed
+
+\layout Standard
+
+\backslash
+/
+\end_inset
+
+-opt-code-size
+\begin_inset LatexCommand \index{-\/-opt-code-size}
+
+\end_inset
+
+
+\series default
+ The compiler will optimize code generation towards compact code, possibly
+ at the expense of code speed.
\layout Subsection
Other Options
\end_inset
.
- see section Parameters and Local Variables for more details.
+ See section
+\begin_inset LatexCommand \ref{sec:Parameters-and-Local-Variables}
+
+\end_inset
+
+ Parameters and Local Variables for more details.
If this option is used all source files in the project should be compiled
with this option.
+ It automatically implies --int-long-reent and --float-reent.
\layout List
\labelwidthstring 00.00.0000
\series default
- This option can be used when the code generated is called by a monitor
- program.
- The compiler will generate a 'ret' upon return from the 'main'
+ This option can be used if the code generated is called by a monitor program
+ or if the main routine includes an endless loop.
+ This option might result in slightly smaller code and save two bytes of
+ stack space.
+ The return from the 'main'
\begin_inset LatexCommand \index{main return}
\end_inset
- function.
+ function will return to the function calling main.
The default setting is to lock up i.e.
generate a '
\family typewriter
/
\end_inset
--nostdincl
-\begin_inset LatexCommand \index{-\/-nostdincl}
+-nostdinc
+\begin_inset LatexCommand \index{-\/-nostdinc}
\end_inset
\series default
Hides your ugly and inefficient c-code from the asm file, so you can always
- blame the compiler :).
+ blame the compiler :)
+\layout List
+\labelwidthstring 00.00.0000
+
+
+\series bold
+-
+\begin_inset ERT
+status Collapsed
+
+\layout Standard
+
+\backslash
+/
+\end_inset
+
+-no-peep-comments
+\begin_inset LatexCommand \index{-\/-no-peep-comments}
+
+\end_inset
+
+
+\series default
+ Will not include peep-hole comments in the generated files.
\layout List
\labelwidthstring 00.00.0000
\end_inset
(jwk burps: please be more specific here, please!).
- If you want rather more than less warnings you should consider using a
- separate tool dedicated to syntax checking like splint
-\begin_inset LatexCommand \url{www.splint.org}
+\layout List
+\labelwidthstring 00.00.0000
+
+
+\series bold
+-
+\begin_inset ERT
+status Collapsed
+
+\layout Standard
+\backslash
+/
\end_inset
-.
+-disable-warning\SpecialChar ~
+<nnnn>
+\begin_inset LatexCommand \index{-\/-disable-warning}
+
+\end_inset
+
+
+\series default
+ Disable specific warning with number <nnnn>.
\layout List
\labelwidthstring 00.00.0000
\end_inset
.
- See file sdcc/as/doc/asxhtm.html for assembler options.
-\layout Subsection
-
-Intermediate Dump Options
-\begin_inset LatexCommand \label{sub:Intermediate-Dump-Options}
+ See file sdcc/as/doc/asxhtm.html for assembler options.cd
+\layout List
+\labelwidthstring 00.00.0000
-\end_inset
+\series bold
+-
+\begin_inset ERT
+status Collapsed
-\begin_inset LatexCommand \index{Options intermediate dump}
+\layout Standard
+\backslash
+/
\end_inset
-
-\begin_inset LatexCommand \index{Intermediate dump options}
+-std-sdcc89
+\begin_inset LatexCommand \index{-\/-std-sdcc89}
\end_inset
-\layout Standard
+\series default
+ Generally follow the C89 standard, but allow SDCC features that conflict
+ with the standard (default).
+\layout List
+\labelwidthstring 00.00.0000
-The following options are provided for the purpose of retargetting and debugging
- the compiler.
- These provided a means to dump the intermediate code (iCode
-\begin_inset LatexCommand \index{iCode}
-\end_inset
+\series bold
+-
+\begin_inset ERT
+status Collapsed
+
+\layout Standard
+
+\backslash
+/
+\end_inset
+
+-std-c89
+\begin_inset LatexCommand \index{-\/-std-c89}
+
+\end_inset
+
+
+\series default
+ Follow the C89 standard and disable SDCC features that conflict with the
+ standard.
+\layout List
+\labelwidthstring 00.00.0000
+
+
+\series bold
+-
+\begin_inset ERT
+status Collapsed
+
+\layout Standard
+
+\backslash
+/
+\end_inset
+
+-std-sdcc99
+\begin_inset LatexCommand \index{-\/-std-sdcc99}
+
+\end_inset
+
+
+\series default
+ Generally follow the C99 standard, but allow SDCC features that conflict
+ with the standard (incomplete support).
+\layout List
+\labelwidthstring 00.00.0000
+
+
+\series bold
+-
+\begin_inset ERT
+status Collapsed
+
+\layout Standard
+
+\backslash
+/
+\end_inset
+
+-std-c99
+\begin_inset LatexCommand \index{-\/-std-sdcc99}
+
+\end_inset
+
+
+\series default
+ Follow the C99 standard and disable SDCC features that conflict with the
+ standard (incomplete support).
+\layout List
+\labelwidthstring 00.00.0000
+
+
+\series bold
+more-pedantic
+\series default
+ Actually this is
+\series bold
+\emph on
+not
+\series default
+\emph default
+ a SDCC compiler option but if you want
+\emph on
+more
+\emph default
+ warnings you can use a separate tool dedicated to syntax checking like
+ splint
+\begin_inset LatexCommand \label{lyx:more-pedantic-SPLINT}
+
+\end_inset
+
+
+\begin_inset LatexCommand \index{lint (syntax checking tool)}
+
+\end_inset
+
+
+\begin_inset LatexCommand \url{http://www.splint.org}
+
+\end_inset
+
+.
+ To make your source files parseable by splint you will have to include
+
+\family sans
+lint.h
+\family default
+
+\begin_inset LatexCommand \index{splint (syntax checking tool)}
+
+\end_inset
+
+ in your source file and add brackets around extended keywords (like
+\family sans
+
+\begin_inset Quotes sld
+\end_inset
+
+__at\SpecialChar ~
+
+\series bold
+(
+\series default
+0xab
+\series bold
+)
+\series default
+
+\begin_inset Quotes srd
+\end_inset
+
+
+\family default
+ and
+\family sans
+
+\begin_inset Quotes sld
+\end_inset
+
+__interrupt\SpecialChar ~
+(2)
+\begin_inset Quotes srd
+\end_inset
+
+
+\family default
+).
+
+\newline
+Splint has an excellent on line manual at
+\begin_inset LatexCommand \url{http://www.splint.org/manual/}
+
+\end_inset
+
+ and it's capabilities go beyond pure syntax checking.
+ You'll need to tell splint the location of SDCC's include files so a typical
+ command line could look like this:
+\newline
+
+\family sans
+splint\SpecialChar ~
+-I\SpecialChar ~
+/usr/local/share/sdcc/include/mcs51/\SpecialChar ~
+\SpecialChar ~
+myprogram.c
+\layout Subsection
+
+Intermediate Dump Options
+\begin_inset LatexCommand \label{sub:Intermediate-Dump-Options}
+
+\end_inset
+
+
+\begin_inset LatexCommand \index{Options intermediate dump}
+
+\end_inset
+
+
+\begin_inset LatexCommand \index{Intermediate dump options}
+
+\end_inset
+
+
+\layout Standard
+
+The following options are provided for the purpose of retargetting and debugging
+ the compiler.
+ They provide a means to dump the intermediate code (iCode
+\begin_inset LatexCommand \index{iCode}
+
+\end_inset
) generated by the compiler in human readable form at various stages of
the compilation process.
data
\begin_inset LatexCommand \index{data (mcs51, ds390 storage class)}
+\end_inset
+
+
+\begin_inset LatexCommand \index{\_\_data (mcs51, ds390 storage class)}
+
\end_inset
/ near
\end_inset
+\begin_inset LatexCommand \index{\_\_near (storage class)}
+
+\end_inset
+
+
\layout Standard
This is the
xdata
\begin_inset LatexCommand \index{xdata (mcs51, ds390 storage class)}
+\end_inset
+
+
+\begin_inset LatexCommand \index{\_\_xdata (mcs51, ds390 storage class)}
+
\end_inset
/ far
\end_inset
+\begin_inset LatexCommand \index{\_\_far (storage class)}
+
+\end_inset
+
+
\layout Standard
Variables declared with this storage class will be placed in the external
\end_inset
+\begin_inset LatexCommand \index{\_\_idata (mcs51, ds390 storage class)}
+
+\end_inset
+
+
\layout Standard
Variables declared with this storage class will be allocated into the indirectly
\end_inset
+\begin_inset LatexCommand \index{\_\_pdata (mcs51, ds390 storage class)}
+
+\end_inset
+
+
\layout Standard
-Paged xdata access is currently not as straightforward as using the other
- addressing modes of a 8051.
- The following example writes 0x01 to the address pointed to.
+Paged xdata access is just as straightforward as using the other addressing
+ modes of a 8051.
+ It is typically located at the start of xdata and has a maximum size of
+ 256 bytes.
+ The following example writes 0x01 to the pdata variable.
Please note, pdata access physically accesses xdata memory.
The high byte of the address is determined by port P2
\begin_inset LatexCommand \index{P2 (mcs51 sfr)}
\end_inset
(or in case of some 8051 variants by a separate Special Function Register,
- see section
+ see section
\begin_inset LatexCommand \ref{sub:MCS51-variants}
\end_inset
\family typewriter
-pdata unsigned char *test_pdata_ptr;
-\newline
-
-\newline
-void main()
-\newline
-{
-\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-test_pdata_ptr = (pdata *)0xfe;
-\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-*test_pdata_ptr = 1;
-\newline
-}
+pdata unsigned char test_pdata;
\layout Standard
-Generates the assembly code:
+Writing 0x01 to this variable generates the assembly code:
\layout Verse
\family typewriter
-75*01 FE\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-mov\SpecialChar ~
- _test_pdata_ptr,#0xFE
-\newline
-78 FE\SpecialChar ~
+78r00\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
-mov\SpecialChar ~
- r0,#0xFE
+mov r0,#_test_pdata
\newline
74 01\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
-mov\SpecialChar ~
- a,#0x01
+mov a,#0x01
\newline
F2\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
-movx @r0,a
+movx @r0,a
\layout Standard
-Be extremely carefull if you use pdata together with the -
+If the -
\begin_inset ERT
status Collapsed
\end_inset
- option.
+ option is used the pdata memory area is followed by the xstack memory area
+ and the sum of their sizes is limited to 256 bytes.
\layout Subsubsection
code
\end_inset
+\begin_inset LatexCommand \index{\_\_code}
+
+\end_inset
+
+
\layout Standard
'Variables' declared with this storage class will be placed in the code
\end_inset
+\begin_inset LatexCommand \index{\_\_bit}
+
+\end_inset
+
+
\layout Standard
This is a data-type and a storage class specifier.
The bit addressable memory consists of 128 bits which are located from 0x20
to 0x2f in data memory.
-\layout Standard
-
+\newline
Apart from this 8051 specific storage class most architectures support ANSI-C
bitfields
\begin_inset LatexCommand \index{bitfields}
\end_inset
-
+
\begin_inset Foot
collapsed false
\end_inset
.
+ In accordance with ISO/IEC 9899 bits and bitfields without an explicit
+ signed modifier are implemented as unsigned.
\layout Subsubsection
sfr
\begin_inset LatexCommand \index{sfr}
+\end_inset
+
+
+\begin_inset LatexCommand \index{\_\_sfr}
+
+\end_inset
+
+ / sfr16
+\begin_inset LatexCommand \index{sfr16}
+
+\end_inset
+
+
+\begin_inset LatexCommand \index{\_\_sfr16}
+
+\end_inset
+
+ / sfr32
+\begin_inset LatexCommand \index{sfr32}
+
+\end_inset
+
+
+\begin_inset LatexCommand \index{\_\_sfr32}
+
\end_inset
/ sbit
-\begin_inset LatexCommand \index{sbit}
+\begin_inset LatexCommand \index{\_\_sbit}
\end_inset
Like the bit keyword,
\emph on
-sfr / sbit
+sfr / sfr16 / sfr32 / sbit
\emph default
-signifies both a data-type and storage class, they are used to describe
- the
+signify both a data-type and storage class, they are used to describe the
+
\emph on
s
\emph default
sfr at
\begin_inset LatexCommand \index{at}
+\end_inset
+
+
+\begin_inset LatexCommand \index{\_\_at}
+
\end_inset
0x80 P0;\SpecialChar ~
/* special function register P0 at location 0x80 */
\newline
+/* 16 bit special function register combination for timer 0 */
+\newline
+/* with the high byte at location 0x8C and the low byte at location 0x8A
+ */
+\newline
+sfr16 at
+\begin_inset LatexCommand \index{at}
+
+\end_inset
+
+
+\begin_inset LatexCommand \index{\_\_at}
+
+\end_inset
+
+ 0x8C8A TMR0;
+\newline
sbit at 0xd7 CY; /* CY (Carry Flag
\begin_inset LatexCommand \index{Flags}
sbit
\emph default
addresses a specific bit within these sfr.
+\newline
+16 Bit and 32 bit special function register combinations which require a
+ certain access order are better not declared using
+\emph on
+sfr16
+\emph default
+ or
+\emph on
+sfr32.
+
+\emph default
+ Allthough SDCC usually accesses them Least Significant Byte (LSB) first,
+ this is not guaranteed.
\layout Subsubsection
Pointers
*/
\newline
char * xdata p;
-\layout Standard
+\newline
+
+\newline
+/* the following is a function pointer physically located in data space
+ */
+\newline
+char (* data fp)(void);
+\layout Standard
Well you get the idea.
\end_inset
+
+\begin_inset LatexCommand \index{\_\_idata (mcs51, ds390 storage class)}
+
+\end_inset
+
).
Furthermore, some chips may have some built in external memory (
\emph on
\end_inset
+
+\begin_inset LatexCommand \index{\_\_xdata (mcs51, ds390 storage class)}
+
+\end_inset
+
) which should not be confused with the internal, directly addressable RAM
memory (
\emph on
\end_inset
+
+\begin_inset LatexCommand \index{\_\_data (mcs51, ds390 storage class)}
+
+\end_inset
+
).
Sometimes this built in
\emph on
\end_inset
of registers (register bank 0), but it is possible to specify that other
- banks of registers should be used in interrupt
+ banks of registers (keyword
+\emph on
+using
+\emph default
+
+\emph on
+
+\begin_inset LatexCommand \index{using (mcs51, ds390 register bank)}
+
+\end_inset
+
+
+\begin_inset LatexCommand \index{\_\_using (mcs51, ds390 register bank)}
+
+\end_inset
+
+
+\emph default
+) should be used in interrupt
\begin_inset LatexCommand \index{interrupt}
+\end_inset
+
+
+\begin_inset LatexCommand \index{\_\_interrupt}
+
\end_inset
routines.
grows, it will use up the remaining register banks, and the 16 bytes used
by the 128 bit variables, and 80 bytes for general purpose use.
- If any bit variables are used, the data variables will be placed after
- the byte holding the last bit variable.
+ If any bit variables are used, the data variables will be placed in unused
+ register banks and after the byte holding the last bit variable.
For example, if register banks 0 and 1 are used, and there are 9 bit variables
(two bytes used),
\emph on
data
\emph default
- variables will be placed starting at address 0x22.
+ variables will be placed starting from address 0x10 to 0x20 and continue
+ at address 0x22.
You can also use -
\begin_inset ERT
status Collapsed
\end_inset
-data-loc
-\begin_inset LatexCommand \index{-\/-data-loc<Value>}
+\begin_inset LatexCommand \index{-\/-data-loc <Value>}
\end_inset
/
\end_inset
--iram-size to specify the size of the total internal RAM (
+-iram-size
+\begin_inset LatexCommand \index{-\/-iram-size <Value>}
+
+\end_inset
+
+ to specify the size of the total internal RAM (
\emph on
data
\emph default
\layout Standard
-By default the 8051 linker will place the stack after the last byte of data
+By default the 8051 linker will place the stack after the last byte of (i)data
variables.
Option -
\begin_inset ERT
\end_inset
-stack-loc
-\begin_inset LatexCommand \index{-\/-stack-loc<Value>}
+\begin_inset LatexCommand \index{-\/-stack-loc <Value>}
\end_inset
\end_inset
-xram-size
-\begin_inset LatexCommand \index{-\/-data-loc}
+\begin_inset LatexCommand \index{-\/-xram-size <Value>}
\end_inset
\end_inset
-code-loc
-\begin_inset LatexCommand \index{-\/-data-loc}
+\begin_inset LatexCommand \index{-\/-code-loc <Value>}
\end_inset
\end_inset
-code-size
-\begin_inset LatexCommand \index{-\/-data-loc}
+\begin_inset LatexCommand \index{-\/-code-size <Value>}
\end_inset
sfr
\begin_inset LatexCommand \index{sfr}
+\end_inset
+
+
+\begin_inset LatexCommand \index{\_\_sfr}
+
\end_inset
(in/out to 8-bit addresses)
banked sfr
\begin_inset LatexCommand \index{sfr}
+\end_inset
+
+
+\begin_inset LatexCommand \index{\_\_sfr}
+
\end_inset
(in/out to 16-bit addresses)
\family typewriter
-sfr banked at 0x123 IoPort;
+sfr banked at
+\begin_inset LatexCommand \index{at}
+
+\end_inset
+
+
+\begin_inset LatexCommand \index{\_\_at}
+
+\end_inset
+
+ 0x123 IoPort;
\layout Standard
Writing 0x01 to this variable generates the assembly code:
sfr
\begin_inset LatexCommand \index{sfr}
+\end_inset
+
+
+\begin_inset LatexCommand \index{\_\_sfr}
+
\end_inset
(in0/out0 to 8 bit addresses on Z180
\family default
.
If you include the file z180.h this will be set automatically.
+\layout Subsection
+
+HC08 Storage Class
+\begin_inset LatexCommand \index{Storage class}
+
+\end_inset
+
+ Language Extensions
+\layout Subsubsection
+
+data
+\begin_inset LatexCommand \index{data (hc08 storage class)}
+
+\end_inset
+
+
+\begin_inset LatexCommand \index{\_\_data (hc08 storage class)}
+
+\end_inset
+
+
+\layout Standard
+
+The data storage class declares a variable that resides in the first 256
+ bytes of memory (the direct page).
+ The HC08 is most efficient at accessing variables (especially pointers)
+ stored here.
+\layout Subsubsection
+
+xdata
+\begin_inset LatexCommand \index{xdata (hc08 storage class)}
+
+\end_inset
+
+
+\begin_inset LatexCommand \index{\_\_xdata (hc08 storage class)}
+
+\end_inset
+
+
+\layout Standard
+
+The xdata storage class declares a variable that can reside anywhere in
+ memory.
+ This is the default if no storage class is specified.
+
\layout Section
Absolute Addressing
at
\begin_inset LatexCommand \index{at}
+\end_inset
+
+
+\begin_inset LatexCommand \index{\_\_at}
+
\end_inset
<address>
xdata
\begin_inset LatexCommand \index{xdata (mcs51, ds390 storage class)}
+\end_inset
+
+
+\begin_inset LatexCommand \index{\_\_xdata (mcs51, ds390 storage class)}
+
\end_inset
at
\begin_inset LatexCommand \index{at}
+\end_inset
+
+
+\begin_inset LatexCommand \index{\_\_at}
+
\end_inset
0x7ffe unsigned int chksum;
\layout Standard
-In the above example the variable chksum will located at 0x7ffe and 0x7fff
+In the above example the variable chksum will be located at 0x7ffe and 0x7fff
of the external ram.
The compiler does
\emph on
\emph on
volatile
\emph default
- should be used to tell the compiler that accesses might not be optimized
- away:
+ has to be used to tell the compiler that accesses might not be removed:
\layout Verse
\layout Standard
For some architectures (mcs51) array accesses are more efficient if an (xdata/fa
-r) array starts at a block (256 byte) boundary
+r) array
+\family typewriter
+\size footnotesize
+
+\begin_inset LatexCommand \index{Aligned array}
+
+\end_inset
+
+
+\family default
+\size default
+ starts at a block (256 byte) boundary
\begin_inset LatexCommand \index{block boundary}
\end_inset
-.
+ (section
+\begin_inset LatexCommand \ref{sub:A-Step-by Assembler Introduction}
+
+\end_inset
+
+ has an example).
\newline
Absolute addresses can be specified for variables in all storage classes,
e.g.:
\family typewriter
-extern volatile bit SDI;
+extern volatile
+\begin_inset LatexCommand \index{volatile}
+
+\end_inset
+
+ bit MOSI;\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+/* master out, slave in */
\newline
-extern volatile bit SCLK;
+extern volatile bit MISO;\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+/* master in, slave out */
\newline
-extern volatile bit CPOL;
+extern volatile bit MCLK;\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+/* master clock */
\newline
\newline
-void DS1306_put(unsigned char value)
+/* Input and Output of a byte on a 3-wire serial bus.
\newline
-{
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+If needed adapt polarity of clock, polarity of data and bit order
\newline
\SpecialChar ~
+*/
+\newline
+unsigned char spi_io(unsigned char out_byte)
+\newline
+{
+\newline
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
-unsigned char mask=0x80;
+\SpecialChar ~
+unsigned char i=8;
\newline
-
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+do {
\newline
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
-while(mask)
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+MOSI = out_byte & 0x80;
\newline
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
-{
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+out_byte <<= 1;
\newline
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
-SDI=(value & mask)?1:0;
+MCLK = 1;
\newline
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
-SCLK=!CPOL;
+/* _asm nop _endasm; */\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+/* for slow peripherals */
\newline
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
-SCLK=CPOL;
+if(MISO)
\newline
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
-mask/=2;
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+out_byte += 1;
\newline
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
-}
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+MCLK = 0;
+\newline
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+} while(--i);
+\newline
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+return out_byte;
\newline
}
\layout Standard
\family typewriter
-bit at 0x80 SDI;\SpecialChar ~
+bit at
+\begin_inset LatexCommand \index{at}
+
+\end_inset
+
+
+\begin_inset LatexCommand \index{\_\_at}
+
+\end_inset
+
+ 0x80 MOSI;\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
/* I/O port 0, bit 0 */
\newline
-bit at 0x81 SCLK;\SpecialChar ~
+bit at 0x81 MISO;\SpecialChar ~
+\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
/* I/O port 0, bit 1 */
\newline
-bit CPOL;\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+bit at 0x82 MCLK;\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-/* This is a variable, let the linker allocate this one */
+/* I/O port 0, bit 2 */
\layout Standard
Similarly, for the second hardware you would use
\family typewriter
-bit at 0x83 SDI;\SpecialChar ~
+bit at 0x83 MOSI;\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
/* I/O port 0, bit 3 */
\newline
-bit at 0x91 SCLK;\SpecialChar ~
+bit at 0x91 MISO;\SpecialChar ~
+\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
/* I/O port 1, bit 1 */
\end_inset
- CPOL;\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
+ at 0x92 MCLK;\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-/* This is a variable, let the linker allocate this one */
+/* I/O port 1, bit 2 */
\layout Standard
and you can use the same hardware dependent routine without changes, as
\end_inset
+\begin_inset LatexCommand \label{sec:Parameters-and-Local-Variables}
+
+\end_inset
+
+
\layout Standard
Automatic (local) variables and parameters to functions can either be placed
\end_inset
- either by using the
+ by using the
\emph on
-
\begin_inset ERT
\emph default
- option or by using the
+ option, by using
+\emph on
+#pragma\SpecialChar ~
+stackauto
+\emph default
+
+\begin_inset LatexCommand \index{\#pragma stackauto}
+
+\end_inset
+
+ or by using the
\emph on
reentrant
\begin_inset LatexCommand \index{reentrant}
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
-data at 0x31 unsigned char j;
+data at
+\begin_inset LatexCommand \index{at}
+
+\end_inset
+
+ 0x31 unsigned char j;
\newline
\SpecialChar ~
\SpecialChar ~
\end_inset
+\layout Subsection
+
+General Information
\layout Standard
SDCC allows
\end_inset
+\begin_inset LatexCommand \index{\_\_interrupt}
+
+\end_inset
+
+
\emph default
keyword is the interrupt number this routine will service.
When present, the compiler will insert a call to this routine in the interrupt
main
\emph default
.
- The
+ The optional
\emph on
using
+\begin_inset LatexCommand \index{using (mcs51, ds390 register bank)}
+
+\end_inset
+
+
+\begin_inset LatexCommand \index{\_\_using (mcs51, ds390 register bank)}
+
+\end_inset
+
+
\emph default
keyword can be used to tell the compiler to use the specified register
bank (8051 specific) when generating code for this function.
\layout Standard
-Interrupt numbers and the corresponding address & descriptions for the Standard
- 8051/8052 are listed below.
- SDCC will automatically adjust the interrupt vector table to the maximum
- interrupt number specified.
+Interrupt service routines open the door for some very interesting bugs:
\newline
+If an interrupt service routine changes variables which are accessed by
+ other functions these variables have to be declared
+\emph on
+volatile
+\emph default
-\layout Standard
-\align center
+\begin_inset LatexCommand \index{volatile}
-\begin_inset Tabular
-<lyxtabular version="3" rows="7" columns="3">
+\end_inset
+
+.
+
+\layout Standard
+
+If the access to these variables is not
+\emph on
+atomic
+\begin_inset LatexCommand \index{atomic}
+
+\end_inset
+
+
+\emph default
+ (i.e.
+ the processor needs more than one instruction for the access and could
+ be interrupted while accessing the variable) the interrupt must be disabled
+ during the access to avoid inconsistent data.
+ Access to 16 or 32 bit variables is obviously not atomic on 8 bit CPUs
+ and should be protected by disabling interrupts.
+ You're not automatically on the safe side if you use 8 bit variables though.
+ We need an example here: f.e.
+ on the 8051 the harmless looking
+\begin_inset Quotes srd
+\end_inset
+
+
+\family typewriter
+flags\SpecialChar ~
+|=\SpecialChar ~
+0x80;
+\family default
+
+\begin_inset Quotes sld
+\end_inset
+
+ is not atomic if
+\family typewriter
+flags
+\family default
+ resides in xdata.
+ Setting
+\begin_inset Quotes srd
+\end_inset
+
+
+\family typewriter
+flags\SpecialChar ~
+|=\SpecialChar ~
+0x40;
+\family default
+
+\begin_inset Quotes sld
+\end_inset
+
+ from within an interrupt routine might get lost if the interrupt occurs
+ at the wrong time.
+
+\begin_inset Quotes sld
+\end_inset
+
+
+\family typewriter
+counter\SpecialChar ~
++=\SpecialChar ~
+8;
+\family default
+
+\begin_inset Quotes srd
+\end_inset
+
+ is not atomic on the 8051 even if
+\family typewriter
+counter
+\family default
+ is located in data memory.
+ Bugs like these are hard to reproduce and can cause a lot of trouble.
+
+\layout Standard
+
+The return address and the registers used in the interrupt service routine
+ are saved on the stack
+\begin_inset LatexCommand \index{stack}
+
+\end_inset
+
+ so there must be sufficient stack space.
+ If there isn't variables or registers (or even the return address itself)
+ will be corrupted.
+ This
+\emph on
+stack overflow
+\emph default
+
+\begin_inset LatexCommand \index{stack overflow}
+
+\end_inset
+
+ is most likely to happen if the interrupt occurs during the
+\begin_inset Quotes sld
+\end_inset
+
+deepest
+\begin_inset Quotes srd
+\end_inset
+
+ subroutine when the stack is already in use for f.e.
+ many return addresses.
+\layout Standard
+
+A special note here, int (16 bit) and long (32 bit) integer division
+\begin_inset LatexCommand \index{Division}
+
+\end_inset
+
+, multiplication
+\begin_inset LatexCommand \index{Multiplication}
+
+\end_inset
+
+ & modulus
+\begin_inset LatexCommand \index{Modulus}
+
+\end_inset
+
+ and floating-point
+\begin_inset LatexCommand \index{Floating point support}
+
+\end_inset
+
+ operations are implemented using external support routines developed in
+ ANSI-C.
+ If an interrupt service routine needs to do any of these operations then
+ the support routines (as mentioned in a following section) will have to
+ be recompiled using the
+\emph on
+ -
+\begin_inset ERT
+status Collapsed
+
+\layout Standard
+
+\backslash
+/
+\end_inset
+
+-stack-auto
+\begin_inset LatexCommand \index{-\/-stack-auto}
+
+\end_inset
+
+
+\emph default
+ option and the source file will need to be compiled using the
+\emph on
+-
+\begin_inset ERT
+status Collapsed
+
+\layout Standard
+
+\backslash
+/
+\end_inset
+
+-int-long-reent
+\emph default
+
+\begin_inset LatexCommand \index{-\/-int-long-reent}
+
+\end_inset
+
+ compiler option.
+\layout Standard
+
+Calling other functions from an interrupt service routine is not recommended,
+ avoid it if possible.
+ Note that when some function is called from an interrupt service routine
+ it should be preceded by a #pragma\SpecialChar ~
+nooverlay
+\begin_inset LatexCommand \index{\#pragma nooverlay}
+
+\end_inset
+
+ if it is not reentrant.
+ Furthermore nonreentrant functions should not be called from the main program
+ while the interrupt service routine might be active.
+
+\newline
+
+\newline
+Also see section
+\begin_inset LatexCommand \ref{sub:Overlaying}
+
+\end_inset
+
+\SpecialChar ~
+about Overlaying and section
+\begin_inset LatexCommand \ref{sub:Functions-using-private-banks}
+
+\end_inset
+
+\SpecialChar ~
+about Functions using private register banks.
+\layout Subsection
+
+MCS51/DS390 Interrupt Service Routines
+\layout Standard
+
+Interrupt numbers and the corresponding address & descriptions for the Standard
+ 8051/8052 are listed below.
+ SDCC will automatically adjust the interrupt vector table to the maximum
+ interrupt number specified.
+\newline
+
+\layout Standard
+\align center
+
+\begin_inset Tabular
+<lyxtabular version="3" rows="7" columns="3">
<features>
<column alignment="center" valignment="top" leftline="true" width="0in">
<column alignment="center" valignment="top" leftline="true" width="0in">
\end_inset
+\begin_inset LatexCommand \index{\_\_using (mcs51, ds390 register bank)}
+
+\end_inset
+
+
\emph default
a register bank or with register bank 0 (
\emph on
\emph on
a, b, dptr
\emph default
- & psw are save and restored, if such an interrupt service routine calls
+ & psw are saved and restored, if such an interrupt service routine calls
another function (using another register bank) then the entire register
bank of the called function will be saved on the stack.
This scheme is recommended for larger interrupt service routines.
+\layout Subsection
+
+HC08 Interrupt Service Routines
\layout Standard
-Interrupt service routines open the door for some very interesting bugs:
-
+Since the number of interrupts available is chip specific and the interrupt
+ vector table always ends at the last byte of memory, the interrupt numbers
+ corresponds to the interrupt vectors in reverse order of address.
+ For example, interrupt 1 will use the interrupt vector at 0xfffc, interrupt
+ 2 will use the interrupt vector at 0xfffa, and so on.
+ However, interrupt 0 (the reset vector at 0xfffe) is not redefinable in
+ this way; instead see section
+\begin_inset LatexCommand \ref{sub:Startup-Code}
+
+\end_inset
+
+ for details on customizing startup.
+\layout Subsection
+
+Z80 Interrupt Service Routines
\layout Standard
-If the interrupt service routines changes variables which are accessed by
- other functions these variables should be declared
+The Z80 uses several different methods for determining the correct interrupt
+ vector depending on the hardware implementation.
+ Therefore, SDCC ignores the optional interrupt number and does not attempt
+ to generate an interrupt vector table.
+\layout Standard
+
+By default, SDCC generates code for a maskable interrupt, which uses an
+ RETI instruction to return from the interrupt.
+ To write an interrupt handler for the non-maskable interrupt, which needs
+ an RETN instruction instead, add the
\emph on
-volatile
+critical
\emph default
+ keyword:
+\layout Verse
-\begin_inset LatexCommand \index{volatile}
-
-\end_inset
-.
+\family typewriter
+void nmi_isr (void) critical interrupt
+\newline
+{
+\newline
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+...
+\newline
+}
+\layout Section
+
+Enabling and Disabling Interrupts
+\layout Subsection
+
+Critical Functions and Critical Statements
\layout Standard
-If the access to these variables is not
+A special keyword may be associated with a block or a function declaring
+ it as
\emph on
-atomic
-\begin_inset LatexCommand \index{atomic access}
-
-\end_inset
-
-
-\emph default
- (i.e.
- the processor needs more than one instruction for the access and could
- be interrupted while accessing the variable) the interrupt must disabled
- during the access to avoid inconsistent data.
- Access to 16 or 32 bit variables is obviously not atomic on 8 bit CPUs
- and should be protected by disabling interrupts.
- You're not automatically on the safe side if you use 8 bit variables though.
- We need an example here: f.e.
- on the 8051 the harmless looking
-\begin_inset Quotes srd
-\end_inset
-
-
-\family typewriter
-flags\SpecialChar ~
-|=\SpecialChar ~
-0x80;
-\family default
-
-\begin_inset Quotes sld
-\end_inset
-
- is not atomic if
-\family typewriter
-flags
-\family default
- resides in xdata.
- Setting
-\begin_inset Quotes srd
-\end_inset
-
-
-\family typewriter
-flags\SpecialChar ~
-|=\SpecialChar ~
-0x40;
-\family default
-
-\begin_inset Quotes sld
-\end_inset
-
- from within an interrupt routine might get lost if the interrupt occurs
- at the wrong time.
-
-\begin_inset Quotes sld
-\end_inset
-
-
-\family typewriter
-counter\SpecialChar ~
-+=\SpecialChar ~
-8;
-\family default
-
-\begin_inset Quotes srd
-\end_inset
-
- is not atomic on the 8051 even if
-\family typewriter
-counter
-\family default
- is located in data memory.
- Bugs like these are hard to reproduce and can cause a lot of trouble.
-
-\layout Standard
-
-A special note here, int (16 bit) and long (32 bit) integer division
-\begin_inset LatexCommand \index{Division}
-
-\end_inset
-
-, multiplication
-\begin_inset LatexCommand \index{Multiplication}
-
-\end_inset
-
- & modulus
-\begin_inset LatexCommand \index{Modulus}
-
-\end_inset
-
- and floating-point
-\begin_inset LatexCommand \index{Floating point support}
-
-\end_inset
-
- operations are implemented using external support routines developed in
- ANSI-C.
- If an interrupt service routine needs to do any of these operations then
- the support routines (as mentioned in a following section) will have to
- be recompiled using the
-\emph on
- -
-\begin_inset ERT
-status Collapsed
-
-\layout Standard
-
-\backslash
-/
-\end_inset
-
--stack-auto
-\begin_inset LatexCommand \index{-\/-stack-auto}
-
-\end_inset
-
-
-\emph default
- option and the source file will need to be compiled using the
-\emph on
--
-\begin_inset ERT
-status Collapsed
-
-\layout Standard
-
-\backslash
-/
-\end_inset
-
--int-long-reent
-\emph default
-
-\begin_inset LatexCommand \index{-\/-int-long-reent}
-
-\end_inset
-
- compiler option.
-\layout Standard
-
-Calling other functions from an interrupt service routine is not recommended,
- avoid it if possible.
- Note that when some function is called from an interrupt service routine
- it should be preceded by a #pragma\SpecialChar ~
-nooverlay
-\begin_inset LatexCommand \index{\#pragma nooverlay}
-
-\end_inset
-
- if it is not reentrant.
- Furthermore nonreentrant functions should not be called from the main program
- while the interrupt service routine might be active.
-
-\newline
-
-\newline
-Also see section
-\begin_inset LatexCommand \ref{sub:Overlaying}
-
-\end_inset
-
-\SpecialChar ~
-about Overlaying and section
-\begin_inset LatexCommand \ref{sub:Functions-using-private-banks}
-
-\end_inset
-
-\SpecialChar ~
-about Functions using private register banks.
-\layout Section
-
-Enabling and Disabling Interrupts
-\layout Subsection
-
-Critical Functions and Critical Statements
-\layout Standard
-
-A special keyword may be associated with a function declaring it as
-\emph on
-critical
-\emph default
-.
- SDCC will generate code to disable all interrupts
-\begin_inset LatexCommand \index{interrupt}
+critical
+\emph default
+.
+ SDCC will generate code to disable all interrupts
+\begin_inset LatexCommand \index{interrupt}
\end_inset
\end_inset
+
+\begin_inset LatexCommand \index{\_\_critical}
+
+\end_inset
+
\newline
{
On some architectures which don't support interrupt priorities these can
be implemented by manipulating the interrupt mask and reenabling interrupts
within the interrupt routine.
- Don't add complexity unless you have to.
+ Check there is sufficient space on the stack
+\begin_inset LatexCommand \index{stack}
+
+\end_inset
+
+ and don't add complexity unless you have to.
-\layout Section
+\layout Subsection
-Functions using private register banks
-\begin_inset LatexCommand \label{sub:Functions-using-private-banks}
+Semaphore
+\begin_inset LatexCommand \index{semaphore}
\end_inset
- (mcs51/ds390)
+ locking (mcs51/ds390)
\layout Standard
-Some architectures have support for quickly changing register sets.
- SDCC supports this feature with the
-\emph on
-using
-\begin_inset LatexCommand \index{using (mcs51, ds390 register bank)}
+Some architectures (mcs51/ds390) have an atomic
+\begin_inset LatexCommand \index{atomic}
\end_inset
-
+ bit test and
+\emph on
+
\emph default
- attribute (which tells the compiler to use a register bank
-\begin_inset LatexCommand \index{register bank (mcs51, ds390)}
+clear
+\emph on
+
+\emph default
+instruction.
+ These type of instructions are typically used in preemptive multitasking
+ systems, where a routine f.e.
+ claims the use of a data structure ('acquires a lock
+\begin_inset LatexCommand \index{lock}
\end_inset
- other than the default bank zero).
- It should only be applied to
-\emph on
-interrupt
+ on it'), makes some modifications and then releases the lock when the data
+ structure is consistent again.
+ The instruction may also be used if interrupt and non-interrupt code have
+ to compete for a resource.
+ With the atomic bit test and clear instruction interrupts
\begin_inset LatexCommand \index{interrupt}
\end_inset
-
-\emph default
- functions (see footnote below).
- This will in most circumstances make the generated ISR code more efficient
- since it will not have to save registers on the stack.
+ don't have to be disabled for the locking operation.
+
\layout Standard
-The
-\emph on
-using
-\emph default
- attribute will have no effect on the generated code for a
-\emph on
-non-interrupt
-\emph default
- function (but may occasionally be useful anyway
-\begin_inset Foot
-collapsed false
+SDCC generates this instruction if the source follows this pattern:
+\layout Verse
-\layout Standard
-possible exception: if a function is called ONLY from 'interrupt' functions
- using a particular bank, it can be declared with the same 'using' attribute
- as the calling 'interrupt' functions.
- For instance, if you have several ISRs using bank one, and all of them
- call memcpy(), it might make sense to create a specialized version of memcpy()
- 'using 1', since this would prevent the ISR from having to save bank zero
- to the stack on entry and switch to bank zero before calling the function
+\family typewriter
+volatile
+\begin_inset LatexCommand \index{volatile}
+
\end_inset
-).
+ bit resource_is_free;
\newline
-\emph on
-(pending: I don't think this has been done yet)
-\layout Standard
-
-An
-\emph on
-interrupt
-\emph default
- function using a non-zero bank will assume that it can trash that register
- bank, and will not save it.
- Since high-priority interrupts
-\begin_inset LatexCommand \index{interrupt priority}
-
-\end_inset
-
- can interrupt low-priority ones on the 8051 and friends, this means that
- if a high-priority ISR
-\emph on
-using
+\newline
+if (resource_is_free)
+\newline
+\SpecialChar ~
+\SpecialChar ~
+{
+\newline
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+resource_is_free=0;
+\newline
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+...
+
+\newline
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+resource_is_free=1;
+\newline
+\SpecialChar ~
+\SpecialChar ~
+}
+\layout Standard
+
+Note, mcs51 and ds390 support only an atomic
+\begin_inset LatexCommand \index{atomic}
+
+\end_inset
+
+ bit test and
+\emph on
+clear
+\emph default
+ instruction (as opposed to atomic bit test and
+\emph on
+set).
+\layout Section
+
+Functions using private register banks
+\begin_inset LatexCommand \label{sub:Functions-using-private-banks}
+
+\end_inset
+
+ (mcs51/ds390)
+\layout Standard
+
+Some architectures have support for quickly changing register sets.
+ SDCC supports this feature with the
+\emph on
+using
+\begin_inset LatexCommand \index{using (mcs51, ds390 register bank)}
+
+\end_inset
+
+
+\begin_inset LatexCommand \index{\_\_using (mcs51, ds390 register bank)}
+
+\end_inset
+
+
+\emph default
+ attribute (which tells the compiler to use a register bank
+\begin_inset LatexCommand \index{register bank (mcs51, ds390)}
+
+\end_inset
+
+ other than the default bank zero).
+ It should only be applied to
+\emph on
+interrupt
+\begin_inset LatexCommand \index{interrupt}
+
+\end_inset
+
+
+\emph default
+ functions (see footnote below).
+ This will in most circumstances make the generated ISR code more efficient
+ since it will not have to save registers on the stack.
+\layout Standard
+
+The
+\emph on
+using
+\emph default
+ attribute will have no effect on the generated code for a
+\emph on
+non-interrupt
+\emph default
+ function (but may occasionally be useful anyway
+\begin_inset Foot
+collapsed false
+
+\layout Standard
+
+possible exception: if a function is called ONLY from 'interrupt' functions
+ using a particular bank, it can be declared with the same 'using' attribute
+ as the calling 'interrupt' functions.
+ For instance, if you have several ISRs using bank one, and all of them
+ call memcpy(), it might make sense to create a specialized version of memcpy()
+ 'using 1', since this would prevent the ISR from having to save bank zero
+ to the stack on entry and switch to bank zero before calling the function
+\end_inset
+
+).
+\newline
+
+\emph on
+(pending: I don't think this has been done yet)
+\layout Standard
+
+An
+\emph on
+interrupt
+\emph default
+ function using a non-zero bank will assume that it can trash that register
+ bank, and will not save it.
+ Since high-priority interrupts
+\begin_inset LatexCommand \index{interrupts}
+
+\end_inset
+
+
+\begin_inset LatexCommand \index{interrupt priority}
+
+\end_inset
+
+ can interrupt low-priority ones on the 8051 and friends, this means that
+ if a high-priority ISR
+\emph on
+using
\emph default
a particular bank occurs while processing a low-priority ISR
\emph on
\emph default
routine to your program to override the default if you need to setup hardware
or perform some other critical operation prior to static & global variable
- initialization.
- On some mcs51 variants xdata has to be explicitly enabled before it can
- be accessed, this is the place to do it.
- See also the compiler option
+ initialization
+\begin_inset LatexCommand \index{Variable initialization}
+
+\end_inset
+
+.
+ On some mcs51 variants xdata
+\begin_inset LatexCommand \index{xdata (mcs51, ds390 storage class)}
+
+\end_inset
+
+ memory has to be explicitly enabled before it can be accessed or if the
+ watchdog needs to be disabled, this is the place to do it.
+ The startup code clears all internal data memory, 256 bytes by default,
+ but from 0 to n-1 if
+\emph on
+-
+\begin_inset ERT
+status Collapsed
+
+\layout Standard
+
+\backslash
+/
+\end_inset
+
+-iram-size
+\begin_inset LatexCommand \index{-\/-iram-size <Value>}
+
+\end_inset
+
+n
+\emph default
+ is used.
+ (recommended for Chipcon CC1010).
+\layout Standard
+
+See also the compiler option
\emph on
-
\begin_inset ERT
\layout Subsection
A Step by Step Introduction
+\begin_inset LatexCommand \label{sub:A-Step-by Assembler Introduction}
+
+\end_inset
+
+
\layout Standard
Starting from a small snippet of c-code this example shows for the MCS51
\family typewriter
\size footnotesize
-unsigned char xdata at 0x7f00 buf[0x100];
+unsigned char far
+\begin_inset LatexCommand \index{far (storage class)}
+
+\end_inset
+
+
+\begin_inset LatexCommand \index{\_\_far (storage class)}
+
+\end_inset
+
+ at
+\begin_inset LatexCommand \index{at}
+
+\end_inset
+
+
+\begin_inset LatexCommand \index{\_\_at}
+
+\end_inset
+
+ 0x7f00 buf[0x100];
+\begin_inset LatexCommand \index{Aligned array}
+
+\end_inset
+
+
\newline
unsigned char head,tail;
\newline
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
-buf[ head++ ] = c;
+buf[ head++ ] = c;\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+/* access to a 256 byte aligned array */
\newline
}
\layout Standard
\end_inset
+\begin_inset LatexCommand \index{\_\_asm}
+
+\end_inset
+
+
\newline
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
cjne a,ar3,00106$
\newline
-ret 00106$:
-\newline
-;buffer.c buf[ head++ ] = c;
-\newline
-\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
-mov\SpecialChar ~
\SpecialChar ~
-r3,_head
+ret
\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-inc\SpecialChar ~
-\SpecialChar ~
-_head
+00106$:
+\newline
+;buffer.c buf[ head++ ] = c; /* access to a 256 byte aligned array */
+\begin_inset LatexCommand \index{Aligned array}
+
+\end_inset
+
+
\newline
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
mov\SpecialChar ~
\SpecialChar ~
-a,r3
+r3,_head
\newline
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
-add\SpecialChar ~
+inc\SpecialChar ~
\SpecialChar ~
-a,#_buf
+_head
\newline
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
mov\SpecialChar ~
\SpecialChar ~
-dpl,a
-\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-clr\SpecialChar ~
-\SpecialChar ~
-a
-\newline
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-\SpecialChar ~
-addc\SpecialChar ~
-a,#(_buf >> 8)
+dpl,r3
\newline
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
mov\SpecialChar ~
\SpecialChar ~
-dph,a
+dph,#(_buf >> 8)
\newline
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
-_endasm;
+_endasm
+\begin_inset LatexCommand \index{\_endasm}
+
+\end_inset
+
+
+\begin_inset LatexCommand \index{\_\_endasm}
+
+\end_inset
+
+;
\newline
}
\layout Standard
The new file buffer.c should compile with only one warning about the unreferenced
function argument 'c'.
Now we hand-optimize the assembly code and insert an #define USE_ASSEMBLY
- and finally have:
+ (1) and finally have:
\layout Verse
\family typewriter
\size footnotesize
-unsigned char xdata at 0x7f00 buf[0x100];
+unsigned char far at 0x7f00 buf[0x100];
\newline
unsigned char head,tail;
\newline
-#define USE_ASSEMBLY
+#define USE_ASSEMBLY (1)
\newline
\newline
-#ifndef USE_ASSEMBLY
+#if !USE_ASSEMBLY
+\newline
+
\newline
void to_buffer( unsigned char c )
\newline
\end_inset
+\begin_inset LatexCommand \index{\_\_asm}
+
+\end_inset
+
+
\newline
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
-_endasm;
+_endasm
+\begin_inset LatexCommand \index{\_endasm}
+
+\end_inset
+
+
+\begin_inset LatexCommand \index{\_\_endasm}
+
+\end_inset
+
+;
\newline
}
\newline
The assembler does not like some characters like ':' or ''' in comments.
You'll find an 100+ pages assembler manual in sdcc/as/doc/asxhtm.html
+\begin_inset LatexCommand \index{asXXXX (as-gbz80, as-hc08, asx8051, as-z80)}
+
\end_inset
-.
- The compiler does not do any validation of the code within the
-\family typewriter
-_asm
+
+\begin_inset LatexCommand \index{Assembler documentation}
+
+\end_inset
+
+
+\end_inset
+
+.
+ The compiler does not do any validation of the code within the
+\family typewriter
+_asm
\begin_inset LatexCommand \index{\_asm}
+\end_inset
+
+
+\begin_inset LatexCommand \index{\_\_asm}
+
\end_inset
...
- _endasm;
+ _endasm
+\size footnotesize
+
+\begin_inset LatexCommand \index{\_endasm}
+
+\end_inset
+
+
+\begin_inset LatexCommand \index{\_\_endasm}
+
+\end_inset
+
+
+\size default
+;
\family default
keyword pair.
Specifically it will not know which registers are used and thus register
\end_inset
+
+\begin_inset LatexCommand \index{\_\_naked}
+
+\end_inset
+
.
\emph default
void simpleInterrupt(void) interrupt
\begin_inset LatexCommand \index{interrupt}
+\end_inset
+
+
+\begin_inset LatexCommand \index{\_\_interrupt}
+
\end_inset
1
\end_inset
+\begin_inset LatexCommand \index{\_\_asm}
+
+\end_inset
+
+
\newline
\SpecialChar ~
\SpecialChar ~
\end_inset
+
+\begin_inset LatexCommand \index{\_\_endasm}
+
+\end_inset
+
;
\newline
}
\end_inset
+
+\begin_inset LatexCommand \index{\_\_asm}
+
+\end_inset
+
\newline
\SpecialChar ~
_endasm
\begin_inset LatexCommand \index{\_endasm}
+\end_inset
+
+
+\begin_inset LatexCommand \index{\_\_endasm}
+
\end_inset
;
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
-_endasm ;
+_endasm
+\begin_inset LatexCommand \index{\_endasm}
+
+\end_inset
+
+
+\begin_inset LatexCommand \index{\_\_endasm}
+
+\end_inset
+
+ ;
\newline
\SpecialChar ~
\SpecialChar ~
\layout Standard
These support routines are developed in ANSI-C so there is room for space
- and speed improvement.
+ and speed improvement
+\begin_inset Foot
+collapsed false
+
+\layout Standard
+
+The floating point routines for the mcs51 are implemented in assembler
+\end_inset
+
+.
Note if all these routines are used simultaneously the data space might
overflow.
- For serious floating point usage it is recommended that the large model
- be used.
+ For serious floating point usage the large model might be needed.
Also notice that you don't have to call this routines directly.
The compiler will use them automatically every time a floating point operation
is required.
in sdcc/device/lib.
\layout Standard
+The default
+\family typewriter
+ printf()
+\begin_inset LatexCommand \index{printf()}
+
+\end_inset
+
+
+\family default
+implementation in
+\family typewriter
+ printf_large.c
+\family default
+ does not support float (except on ds390).
+ To enable this recompile it with the option
+\emph on
+-
+\begin_inset ERT
+status Collapsed
+
+\layout Standard
+
+\backslash
+/
+\end_inset
+
+DUSE_FLOATS=1
+\begin_inset LatexCommand \index{USE\_FLOATS}
+
+\end_inset
+
+
+\emph default
+ on the command line.
+ Use
+\emph on
+-
+\begin_inset ERT
+status Collapsed
+
+\layout Standard
+
+\backslash
+/
+\end_inset
+
+-model-large
+\begin_inset LatexCommand \index{-\/-model-large}
+
+\end_inset
+
+
+\emph default
+ for the mcs51 port, since this uses a lot of memory.
+\layout Standard
+
If you're short on memory you might want to use
\family typewriter
printf_small()
+\begin_inset LatexCommand \index{printf\_small()}
+
+\end_inset
+
+
\family default
\emph on
\emph default
of
\family typewriter
- printf()
-\begin_inset LatexCommand \index{printf()}
+ printf().
+
+\family default
+ For the mcs51 there additionally are assembly versions
+\family typewriter
+printf_tiny()
+\begin_inset LatexCommand \index{printf\_tiny() (mcs51)}
\end_inset
-.
\family default
- For the mcs51 there is an assembly version
+ and
\family typewriter
printf_fast()
+\begin_inset LatexCommand \index{printf\_fast() (mcs51)}
+
+\end_inset
+
+
+\family default
+and
+\family typewriter
+ printf_fast_f()
+\begin_inset LatexCommand \index{printf\_fast\_f() (mcs51)}
+
+\end_inset
+
+
\family default
- which should fit the requirements of many embedded systems.
+ which should fit the requirements of many embedded systems (printf_fast()
+ can be customized by unsetting #defines to
+\emph on
+not
+\emph default
+ support long variables and field widths).
\layout Subsection
Math functions (sin, pow, sqrt etc.)
\end_inset
- memory (usually at the start of the external ram segment) and is 256 bytes
- in size.
+ memory (usually at the start of the external ram segment) and uses all
+ unused space in pdata (max.
+ 256 bytes).
When -
\begin_inset ERT
status Collapsed
option, all parameters and local variables are allocated on the external
stack (note: support libraries will need to be recompiled with the same
- options).
+ options.
+ There is a predefined target in the library makefile).
\layout Standard
The compiler outputs the higher order address byte of the external ram segment
\end_inset
-, therefore when using the External Stack option, this port
+ (see also section
+\begin_inset LatexCommand \ref{sub:MCS51-variants}
+
+\end_inset
+
+), therefore when using the External Stack option, this port
\emph on
may not
\emph default
\end_inset
- this will save all current options to the save/restore stack.
- See restore.
+ See #pragma\SpecialChar ~
+restore.
\layout Itemize
restore
saves & restores can be nested.
SDCC uses a save/restore stack: save pushes current options to the stack,
restore pulls current options from the stack.
- See save.
-\layout Itemize
-
-nogcse
-\begin_inset LatexCommand \index{\#pragma nogcse}
-
-\end_inset
+ See #pragma\SpecialChar ~
+save.
+\newline
- - will stop global common subexpression elimination.
\layout Itemize
-noinduction
-\begin_inset LatexCommand \index{\#pragma noinduction}
+callee_saves
+\begin_inset LatexCommand \index{\#pragma callee\_saves}
\end_inset
- - will stop loop induction optimizations.
-\layout Itemize
-
-nojtbound
-\begin_inset LatexCommand \index{\#pragma nojtbound}
-
-\end_inset
- - will not generate code for boundary value checking, when switch statements
- are turned into jump-tables (dangerous).
- For more details see section
-\begin_inset LatexCommand \ref{sub:'switch'-Statements}
+\begin_inset LatexCommand \index{function prologue}
\end_inset
-.
-\layout Itemize
-
-nooverlay
-\begin_inset LatexCommand \index{\#pragma nooverlay}
+ function1[,function2[,function3...]] - The compiler by default uses a caller
+ saves convention for register saving across function calls, however this
+ can cause unnecessary register pushing & popping
+\begin_inset LatexCommand \index{push/pop}
\end_inset
- - the compiler will not overlay the parameters and local variables of a
- function.
-\layout Itemize
+ when calling small functions from larger functions.
+ This option can be used to switch off the register saving convention for
+ the function names specified.
+ The compiler will not save registers when calling these functions, extra
+ code need to be manually inserted at the entry & exit for these functions
+ to save & restore the registers used by these functions, this can SUBSTANTIALLY
+ reduce code & improve run time performance of the generated code.
+ In the future the compiler (with inter procedural analysis) may be able
+ to determine the appropriate scheme to use for each function call.
+ If -
+\begin_inset ERT
+status Collapsed
-less_pedantic
-\begin_inset LatexCommand \index{\#pragma less\_pedantic}
+\layout Standard
+\backslash
+/
\end_inset
- - the compiler will not warn you anymore for obvious mistakes, you'r on
- your own now ;-(
-\layout Itemize
-
-noloopreverse
-\begin_inset LatexCommand \index{\#pragma noloopreverse}
+-callee-saves command line option is used, the function names specified
+ in #pragma\SpecialChar ~
+callee_saves
+\begin_inset LatexCommand \index{\#pragma callee\_saves}
\end_inset
- - Will not do loop reversal optimization
+ is appended to the list of functions specified in the command line.
\layout Itemize
exclude
\end_inset
- none | {acc[,b[,dpl[,dph]]] - The exclude pragma disables generation of
- pair of push/pop
+ none | {acc[,b[,dpl[,dph]]] - The exclude pragma disables the generation
+ of pairs of push/pop
\begin_inset LatexCommand \index{push/pop}
\end_inset
- instruction in ISR function (using interrupt
+ instructions in
+\emph on
+I
+\emph default
+nterrupt
\begin_inset LatexCommand \index{interrupt}
\end_inset
- keyword).
+
+\emph on
+S
+\emph default
+ervice
+\emph on
+R
+\emph default
+outines.
The directive should be placed immediately before the ISR function definition
and it affects ALL ISR functions following it.
To enable the normal register saving for ISR functions use #pragma\SpecialChar ~
\end_inset
.
-\layout Itemize
-
-noiv
-\begin_inset LatexCommand \index{\#pragma noiv}
+ See also the related keyword _naked
+\begin_inset LatexCommand \index{\_naked}
\end_inset
- - Do not generate interrupt
-\begin_inset LatexCommand \index{interrupt}
-
-\end_inset
- vector table entries for all ISR functions defined after the pragma.
- This is useful in cases where the interrupt vector table must be defined
- manually, or when there is a secondary, manually defined interrupt vector
- table (e.g.
- for the autovector feature of the Cypress EZ-USB FX2).
- More elegantly this can be achieved by obmitting the optional interrupt
- number after the interrupt keyword, see section
-\begin_inset LatexCommand \ref{sub:Interrupt-Service-Routines}
+\begin_inset LatexCommand \index{\_\_naked}
\end_inset
-\SpecialChar ~
-about interrupts.
+.
\layout Itemize
-callee_saves
-\begin_inset LatexCommand \index{\#pragma callee\_saves}
+less_pedantic
+\begin_inset LatexCommand \index{\#pragma less\_pedantic}
\end_inset
+ - the compiler will not warn you anymore for obvious mistakes, you'r on
+ your own now ;-(
+\layout Itemize
-\begin_inset LatexCommand \index{function prologue}
+disable_warning <nnnn>
+\begin_inset LatexCommand \index{\#pragma disable\_warning}
\end_inset
- function1[,function2[,function3...]] - The compiler by default uses a caller
- saves convention for register saving across function calls, however this
- can cause unnecessary register pushing & popping
-\begin_inset LatexCommand \index{push/pop}
+ - the compiler will not warn you anymore about warning number <nnnn>.
+\layout Itemize
+
+nogcse
+\begin_inset LatexCommand \index{\#pragma nogcse}
\end_inset
- when calling small functions from larger functions.
- This option can be used to switch off the register saving convention for
- the function names specified.
- The compiler will not save registers when calling these functions, extra
- code need to be manually inserted at the entry & exit for these functions
- to save & restore the registers used by these functions, this can SUBSTANTIALLY
- reduce code & improve run time performance of the generated code.
- In the future the compiler (with inter procedural analysis) may be able
- to determine the appropriate scheme to use for each function call.
- If -
+ - will stop global common subexpression elimination.
+\layout Itemize
+
+noinduction
+\begin_inset LatexCommand \index{\#pragma noinduction}
+
+\end_inset
+
+ - will stop loop induction optimizations.
+\layout Itemize
+
+noinvariant
+\begin_inset LatexCommand \index{\#pragma noinvariant}
+
+\end_inset
+
+ - will not do loop invariant optimizations.
+ For more details see Loop Invariants in section
+\begin_inset LatexCommand \ref{sub:Loop-Optimizations}
+
+\end_inset
+
+.
+\layout Itemize
+
+noiv
+\begin_inset LatexCommand \index{\#pragma noiv}
+
+\end_inset
+
+ - Do not generate interrupt
+\begin_inset LatexCommand \index{interrupt}
+
+\end_inset
+
+ vector table entries for all ISR functions defined after the pragma.
+ This is useful in cases where the interrupt vector table must be defined
+ manually, or when there is a secondary, manually defined interrupt vector
+ table (e.g.
+ for the autovector feature of the Cypress EZ-USB FX2).
+ More elegantly this can be achieved by obmitting the optional interrupt
+ number after the interrupt keyword, see section
+\begin_inset LatexCommand \ref{sub:Interrupt-Service-Routines}
+
+\end_inset
+
+\SpecialChar ~
+about interrupts.
+\layout Itemize
+
+nojtbound
+\begin_inset LatexCommand \index{\#pragma nojtbound}
+
+\end_inset
+
+ - will not generate code for boundary value checking, when switch statements
+ are turned into jump-tables (dangerous).
+ For more details see section
+\begin_inset LatexCommand \ref{sub:'switch'-Statements}
+
+\end_inset
+
+.
+\layout Itemize
+
+noloopreverse
+\begin_inset LatexCommand \index{\#pragma noloopreverse}
+
+\end_inset
+
+ - Will not do loop reversal optimization
+\layout Itemize
+
+nooverlay
+\begin_inset LatexCommand \index{\#pragma nooverlay}
+
+\end_inset
+
+ - the compiler will not overlay the parameters and local variables of a
+ function.
+\layout Itemize
+
+stackauto
+\begin_inset LatexCommand \index{\#pragma stackauto}
+
+\end_inset
+
+- See option -
\begin_inset ERT
status Collapsed
/
\end_inset
--callee-saves command line option is used, the function names specified
- in #pragma\SpecialChar ~
-callee_saves
-\begin_inset LatexCommand \index{\#pragma callee\_saves}
+-stack-auto
+\begin_inset LatexCommand \index{-\/-stack-auto}
\end_inset
- is appended to the list of functions specified in the command line.
+ and section
+\begin_inset LatexCommand \ref{sec:Parameters-and-Local-Variables}
+
+\end_inset
+
+ Parameters and Local Variables.
+\layout Itemize
+
+opt_code_speed
+\begin_inset LatexCommand \index{\#pragma opt\_code\_speed}
+
+\end_inset
+
+- The compiler will optimize code generation towards fast code, possibly
+ at the expense of code size.
+\layout Itemize
+
+opt_code_size
+\begin_inset LatexCommand \index{\#pragma opt\_code\_size}
+
+\end_inset
+
+- The compiler will optimize code generation towards compact code, possibly
+ at the expense of code speed.
+\layout Itemize
+
+opt_code_balanced
+\begin_inset LatexCommand \index{\#pragma opt\_code\_balanced}
+
+\end_inset
+
+- The compiler will attempt to generate code that is both compact and fast,
+ as long as meeting one goal is not a detriment to the other (this is the
+ default).
+
+\layout Itemize
+
+std_sdcc89
+\begin_inset LatexCommand \index{\#pragma std\_sdcc89}
+
+\end_inset
+
+- Generally follow the C89 standard, but allow SDCC features that conflict
+ with the standard (default).
+\layout Itemize
+
+std_c89
+\begin_inset LatexCommand \index{\#pragma std\_c89}
+
+\end_inset
+
+- Follow the C89 standard and disable SDCC features that conflict with the
+ standard.
+\layout Itemize
+
+std_sdcc99
+\begin_inset LatexCommand \index{\#pragma std\_sdcc99}
+
+\end_inset
+
+- Generally follow the C99 standard, but allow SDCC features that conflict
+ with the standard (incomplete support).
+\layout Itemize
+
+std_c99
+\begin_inset LatexCommand \index{\#pragma std\_c99}
+
+\end_inset
+
+- Follow the C99 standard and disable SDCC features that conflict with the
+ standard (incomplete support).
\layout Standard
SDCPP supports the following #pragma directives:
</row>
</lyxtabular>
-\end_inset
+\end_inset
+
+
+\layout Chapter
+
+Notes on supported Processors
+\layout Section
+
+MCS51 variants
+\begin_inset LatexCommand \label{sub:MCS51-variants}
+
+\end_inset
+
+
+\begin_inset LatexCommand \index{MCS51 variants}
+
+\end_inset
+
+
+\layout Standard
+
+MCS51 processors are available from many vendors and come in many different
+ flavours.
+ While they might differ considerably in respect to Special Function Registers
+ the core MCS51 is usually not modified or is kept compatible.
+
+\layout Subsection
+
+pdata access by SFR
+\layout Standard
+
+With the upcome of devices with internal xdata and flash memory devices
+ using port P2
+\begin_inset LatexCommand \index{P2 (mcs51 sfr)}
+
+\end_inset
+
+ as dedicated I/O port is becoming more popular.
+ Switching the high byte for pdata
+\begin_inset LatexCommand \index{pdata (mcs51, ds390 storage class)}
+
+\end_inset
+
+ access which was formerly done by port P2 is then achieved by a Special
+ Function Register
+\begin_inset LatexCommand \index{sfr}
+
+\end_inset
+
+.
+ In well-established MCS51 tradition the address of this
+\emph on
+sfr
+\emph default
+ is where the chip designers decided to put it.
+ Needless to say that they didn't agree on a common name either.
+ So that the startup code can correctly initialize xdata variables, you
+ should define an sfr with the name _XPAGE
+\family typewriter
+
+\begin_inset LatexCommand \index{\_XPAGE (mcs51)}
+
+\end_inset
+
+
+\family default
+ at the appropriate location if the default, port P2, is not used for this.
+ Some examples are:
+\layout Verse
+
+
+\family typewriter
+sfr at 0x92 _XPAGE; /* Cypress EZ-USB family */
+\layout Verse
+
+
+\family typewriter
+sfr at 0xaf _XPAGE; /* some Silicon Labs (Cygnal) chips */
+\layout Verse
+
+
+\family typewriter
+sfr at 0xaa _XPAGE; /* some Silicon Labs (Cygnal) chips */
+\layout Standard
+
+For more exotic implementations further customizations may be needed.
+ See section
+\begin_inset LatexCommand \ref{sub:Startup-Code}
+
+\end_inset
+
+ for other possibilities.
+\layout Subsection
+
+Other Features available by SFR
+\layout Standard
+
+Some MCS51 variants offer features like Double DPTR
+\begin_inset LatexCommand \index{DPTR}
+
+\end_inset
+
+, multiple DPTR, decrementing DPTR, 16x16 Multiply.
+ These are currently not used for the MCS51 port.
+ If you absolutely need them you can fall back to inline assembly or submit
+ a patch to SDCC.
+\layout Section
+
+DS400 port
+\layout Standard
+
+The DS80C400 microcontroller has a rich set of peripherals.
+ In its built-in ROM library it includes functions to access some of the
+ features, among them is a TCP stack with IP4 and IP6 support.
+ Library headers (currently in beta status) and other files are provided
+ at
+\size footnotesize
+
+\begin_inset LatexCommand \url{ftp://ftp.dalsemi.com/pub/tini/ds80c400/c_libraries/sdcc/index.html}
+
+\end_inset
+
+.
+
+\layout Section
+
+The Z80 and gbz80 port
+\layout Standard
+
+SDCC can target both the Zilog
+\begin_inset LatexCommand \index{Z80}
+
+\end_inset
+
+ and the Nintendo Gameboy's Z80-like gbz80
+\begin_inset LatexCommand \index{gbz80 (GameBoy Z80)}
+
+\end_inset
+
+.
+ The Z80 port is passed through the same
+\emph on
+regressions tests
+\begin_inset LatexCommand \index{Regression test}
+
+\end_inset
+
+
+\emph default
+ as the MCS51 and DS390 ports, so floating point support, support for long
+ variables and bitfield support is fine.
+ See mailing lists and forums about interrupt routines.
+\layout Standard
+
+As always, the code is the authoritative reference - see z80/ralloc.c and
+ z80/gen.c.
+ The stack
+\begin_inset LatexCommand \index{stack}
+
+\end_inset
+
+ frame is similar to that generated by the IAR Z80 compiler.
+ IX is used as the base pointer, HL and IY are used as a temporary registers,
+ and BC and DE are available for holding variables.
+ Return values
+\begin_inset LatexCommand \index{return value}
+
+\end_inset
+
+ for the Z80 port are stored in L (one byte), HL (two bytes), or DEHL (four
+ bytes).
+ The gbz80 port use the same set of registers for the return values, but
+ in a different order of significance: E (one byte), DE (two bytes), or
+ HLDE (four bytes).
+\layout Section
+
+The HC08 port
+\layout Standard
+
+The port to the Motorola HC08
+\begin_inset LatexCommand \index{HC08}
+
+\end_inset
+
+ family has been added in October 2003, and is still undergoing some basic
+ development.
+ The code generator is complete, but the register allocation is still quite
+ unoptimized.
+ Some of the SDCC's standard C library functions have embedded non-HC08
+ inline assembly and so are not yet usable.
+\newline
+
+\newline
+
+\layout Section
+
+The PIC14 port
+\layout Standard
+
+The 14bit PIC
+\begin_inset LatexCommand \index{PIC14}
+
+\end_inset
+
+ port still requires a major effort from the development community.
+ However it can work for very simple code.
+\layout Subsection
+
+C code and 14bit PIC code page
+\begin_inset LatexCommand \index{code page (pic14)}
+
+\end_inset
+
+ and RAM banks
+\begin_inset LatexCommand \index{RAM bank (pic14)}
+
+\end_inset
+
+
+\layout Standard
+
+The linker organizes allocation for the code page and RAM banks.
+ It does not have intimate knowledge of the code flow.
+ It will put all the code section of a single asm file into a single code
+ page.
+ In order to make use of multiple code pages, separate asm files must be
+ used.
+ The compiler treats all functions of a single C file as being in the same
+ code page unless it is non static.
+ The compiler treats all local variables of a single C file as being in
+ the same RAM bank unless it is an extern.
+\newline
+
+\newline
+To get the best follow these guide lines:
+\layout Enumerate
+
+make local functions static, as non static functions require code page selection
+ overhead.
+\layout Enumerate
+
+Make local variables static as extern variables require RAM bank selection
+ overhead.
+\layout Enumerate
+
+For devices that have multiple code pages it is more efficient to use the
+ same number of files as pages, i.e.
+ for the 16F877 use 4 separate files and i.e.
+ for the 16F874 use 2 separate files.
+ This way the linker can put the code for each file into different code
+ pages and the compiler can allocate reusable variables more efficiently
+ and there's less page selection overhead.
+ And as for any 8 bit micro (especially for PIC 14 as they have a very simple
+ instruction set) use 'unsigned char' whereever possible instead of 'int'.
+\layout Subsection
+
+Creating a device include file
+\layout Standard
+
+For generating a device include file use the support perl script inc2h.pl
+ kept in directory support/script.
+\layout Subsection
+
+Interrupt code
+\layout Standard
+
+For the interrupt function, use the keyword 'interrupt'
+\begin_inset LatexCommand \index{interrupt}
+
+\end_inset
+
+ with level number of 0 (PIC14 only has 1 interrupt so this number is only
+ there to avoid a syntax error - it ought to be fixed).
+ E.g.:
+\layout Verse
+
+
+\family typewriter
+void Intr(void) interrupt 0
+\newline
+{
+\newline
+\SpecialChar ~
+\SpecialChar ~
+T0IF = 0; /* Clear timer interrupt */
+\newline
+}
+\layout Subsection
+
+Linking and assembling
+\layout Standard
+
+For assembling you can use either GPUTILS'
+\begin_inset LatexCommand \index{gputils (pic tools)}
+
+\end_inset
+
+ gpasm.exe or MPLAB's mpasmwin.exe.
+ GPUTILS is available from
+\begin_inset LatexCommand \url{http://sourceforge.net/projects/gputils}
+
+\end_inset
+
+.
+ For linking you can use either GPUTIL's gplink or MPLAB's mplink.exe.
+ If you use MPLAB and an interrupt function then the linker script file
+ vectors section will need to be enlarged to link with mplink.
+\newline
+
+\newline
+Here is a
+\family typewriter
+Makefile
+\family default
+ using GPUTILS:
+\layout Verse
+
+
+\family typewriter
+.c.o:
+\newline
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+sdcc -S -V -mpic14 -p16F877 $<
+\newline
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+gpasm -c $*.asm
+\newline
+
+\newline
+$(PRJ).hex: $(OBJS)
+\newline
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+gplink -m -s $(PRJ).lkr -o $(PRJ).hex $(OBJS)
+\layout Standard
+
+Here is a
+\family typewriter
+Makefile
+\family default
+ using MPLAB:
+\layout Verse
+
+
+\family typewriter
+.c.o:
+\newline
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+sdcc -S -V -mpic14 -p16F877 $<
+\newline
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+mpasmwin /q /o $*.asm
+\newline
+
+\newline
+$(PRJ).hex: $(OBJS)
+\newline
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+mplink /v $(PRJ).lkr /m $(PRJ).map /o $(PRJ).hex $(OBJS)
+\layout Standard
+
+Please note that indentations within a
+\family typewriter
+ Makefile
+\family default
+ have to be done with a tabulator character.
+\layout Section
+
+The PIC16
+\begin_inset LatexCommand \index{PIC16}
+
+\end_inset
+
+ port
+\layout Standard
+
+The PIC16
+\begin_inset LatexCommand \index{PIC16}
+
+\end_inset
+
+ port is the portion of SDCC that is responsible to produce code for the
+ Microchip
+\begin_inset LatexCommand \index{Microchip}
+
+\end_inset
+
+(TM) microcontrollers with 16 bit core.
+ Currently this family of microcontrollers contains the PIC18Fxxx and PIC18Fxxxx.
+ Currently supported devices are:
+\layout Standard
+\align center
+
+\begin_inset Tabular
+<lyxtabular version="3" rows="4" columns="6">
+<features>
+<column alignment="center" valignment="top" leftline="true" width="0">
+<column alignment="center" valignment="top" leftline="true" width="0">
+<column alignment="center" valignment="top" leftline="true" width="0">
+<column alignment="center" valignment="top" leftline="true" width="0">
+<column alignment="center" valignment="top" leftline="true" width="0">
+<column alignment="center" valignment="top" leftline="true" rightline="true" width="0">
+<row topline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+18F242
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+18F248
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+18F252
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+18F258
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+18F442
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+18F448
+\end_inset
+</cell>
+</row>
+<row topline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+18F452
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+18F458
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+18F1220
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+18F2220
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+18F2550
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+18F4331
+\end_inset
+</cell>
+</row>
+<row topline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+18F4455
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+18F6520
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+18F6620
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+18F6680
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+18F6720
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+18F8520
+\end_inset
+</cell>
+</row>
+<row topline="true" bottomline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+18F8620
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+18F8680
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+18F8720
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+\end_inset
+</cell>
+</row>
+</lyxtabular>
+
+\end_inset
+
+
+\layout Subsection
+
+Global Options
+\layout Standard
+
+PIC16 port supports the standard command line arguments as supposed, with
+ the exception of certain cases that will be mentioned in the following
+ list:
+\layout List
+\labelwidthstring 00.00.0000
+
+-
+\begin_inset ERT
+status Collapsed
+
+\layout Standard
+
+\backslash
+/
+\end_inset
+
+-callee-saves See -
+\begin_inset ERT
+status Collapsed
+
+\layout Standard
+
+\backslash
+/
+\end_inset
+
+-all-callee-saves
+\layout List
+\labelwidthstring 00.00.0000
+
+-
+\begin_inset ERT
+status Collapsed
+
+\layout Standard
+
+\backslash
+/
+\end_inset
+
+-all-callee-saves All function arguments are passed on stack by default.
+
+\emph on
+There is no need to specify this in the command line.
+\layout List
+\labelwidthstring 00.00.0000
+
+-
+\begin_inset ERT
+status Collapsed
+
+\layout Standard
+
+\backslash
+/
+\end_inset
+
+-fommit-frame-pointer Frame pointer will be omitted when the function uses
+ no local variables.
+\layout Subsection
+
+Port Specific Options
+\begin_inset LatexCommand \index{Options PIC16}
+
+\end_inset
+
+
+\layout Standard
+
+The port specific options appear after the global options in the sdcc --help
+ output.
+\layout Subsubsection
+
+General Options
+\layout Standard
+
+General options enable certain port features and optimizations.
+\layout List
+\labelwidthstring 00.00.0000
+
+-
+\begin_inset ERT
+status Collapsed
+
+\layout Standard
+
+\backslash
+/
+\end_inset
+
+-stack-model=[model] Used in conjuction with the command above.
+ Defines the stack model to be used, valid stack models are :
+\begin_deeper
+\layout List
+\labelwidthstring 00.00.0000
+
+
+\emph on
+small
+\emph default
+ Selects small stack model.
+ 8 bit stack and frame pointers.
+ Supports 256 bytes stack size.
+\layout List
+\labelwidthstring 00.00.0000
+
+
+\emph on
+large
+\emph default
+ Selects large stack model.
+ 16 bit stack and frame pointers.
+ Supports 65536 bytes stack size.
+\end_deeper
+\layout List
+\labelwidthstring 00.00.0000
+
+-
+\begin_inset ERT
+status Collapsed
+
+\layout Standard
+
+\backslash
+/
+\end_inset
+
+-preplace-udata-with=[kword] Replaces the default udata keyword for allocating
+ unitialized data variables with [kword].
+ Valid keywords are: "udata_acs", "udata_shr", "udata_ovr".
+\layout List
+\labelwidthstring 00.00.0000
+
+-
+\begin_inset ERT
+status Collapsed
+
+\layout Standard
+
+\backslash
+/
+\end_inset
+
+-ivt-loc <nnnn> positions the Interrupt Vector Table at location <nnnn>.
+ Useful for bootloaders.
+\layout List
+\labelwidthstring 00.00.0000
+
+-
+\begin_inset ERT
+status Collapsed
+
+\layout Standard
+
+\backslash
+/
+\end_inset
+
+-asm= sets the full path and name of an external assembler to call.
+\layout List
+\labelwidthstring 00.00.0000
+
+-
+\begin_inset ERT
+status Collapsed
+
+\layout Standard
+
+\backslash
+/
+\end_inset
+
+-link= sets the full path and name of an external linker to call.
+\layout List
+\labelwidthstring 00.00.0000
+
+-
+\begin_inset ERT
+status Collapsed
+
+\layout Standard
+
+\backslash
+/
+\end_inset
+
+-mplab-comp MPLAB compatibility option.
+ Currently only suppresses special gpasm directives.
+\layout Subsubsection
+
+Optimization Options
+\layout List
+\labelwidthstring 00.00.0000
+
+-
+\begin_inset ERT
+status Collapsed
+
+\layout Standard
+
+\backslash
+/
+\end_inset
+
+-optimize-goto Try to use (conditional) BRA instead of GOTO
+\layout List
+\labelwidthstring 00.00.0000
+
+-
+\begin_inset ERT
+status Collapsed
+
+\layout Standard
+
+\backslash
+/
+\end_inset
+
+-optimize-cmp Try to optimize some compares.
+\layout List
+\labelwidthstring 00.00.0000
+
+-
+\begin_inset ERT
+status Collapsed
+
+\layout Standard
+
+\backslash
+/
+\end_inset
+
+-obanksel=nn Set optimization level for inserting BANKSELs.
+\newline
+
+\begin_deeper
+\layout List
+\labelwidthstring 00.00.0000
+
+0 no optimization
+\layout List
+\labelwidthstring 00.00.0000
+
+1 checks previous used register and if it is the same then does not emit
+ BANKSEL, accounts only for labels.
+\layout List
+\labelwidthstring 00.00.0000
+
+2 tries to check the location of (even different) symbols and removes BANKSELs
+ if they are in the same bank.
+
+\newline
+
+\emph on
+Important: There might be problems if the linker script has data sections
+ across bank borders!
+\end_deeper
+\layout Subsubsection
+
+Linking Options
+\layout List
+\labelwidthstring 00.00.0000
+
+-
+\begin_inset ERT
+status Collapsed
+
+\layout Standard
+
+\backslash
+/
+\end_inset
+
+-nodefaultlibs do not link default libraries when linking
+\layout List
+\labelwidthstring 00.00.0000
+
+-
+\begin_inset ERT
+status Collapsed
+
+\layout Standard
+
+\backslash
+/
+\end_inset
+
+-no-crt Don't link the default run-time modules
+\layout List
+\labelwidthstring 00.00.0000
+
+-
+\begin_inset ERT
+status Collapsed
+
+\layout Standard
+
+\backslash
+/
+\end_inset
+
+-use-crt= Use a custom run-time module instead of the defaults.
+\layout Subsubsection
+
+Debugging Options
+\layout Standard
+
+Debugging options enable extra debugging information in the output files.
+\layout List
+\labelwidthstring 00.00.0000
+
+-
+\begin_inset ERT
+status Collapsed
+
+\layout Standard
+
+\backslash
+/
+\end_inset
+
+-debug-xtra Similar to -
+\begin_inset ERT
+status Collapsed
+
+\layout Standard
+
+\backslash
+/
+\end_inset
+
+-debug
+\begin_inset LatexCommand \index{-\/-debug}
+
+\end_inset
+
+, but dumps more information.
+\layout List
+\labelwidthstring 00.00.0000
+
+-
+\begin_inset ERT
+status Collapsed
+
+\layout Standard
+
+\backslash
+/
+\end_inset
+
+-debug-ralloc Force register allocator to dump <source>.d file with debugging
+ information.
+ <source> is the name of the file compiled.
+\layout List
+\labelwidthstring 00.00.0000
+
+-
+\begin_inset ERT
+status Collapsed
+
+\layout Standard
+
+\backslash
+/
+\end_inset
+
+-pcode-verbose Enable pcode debugging information in translation.
+\layout List
+\labelwidthstring 00.00.0000
+
+-
+\begin_inset ERT
+status Collapsed
+
+\layout Standard
+
+\backslash
+/
+\end_inset
+
+-denable-peeps Force the usage of peepholes.
+ Use with care.
+\layout List
+\labelwidthstring 00.00.0000
+
+-
+\begin_inset ERT
+status Collapsed
+
+\layout Standard
+
+\backslash
+/
+\end_inset
+
+-gstack Trace push/pops for stack pointer overflow
+\layout List
+\labelwidthstring 00.00.0000
+
+-
+\begin_inset ERT
+status Collapsed
+
+\layout Standard
+
+\backslash
+/
+\end_inset
+
+-call-tree dump call tree in .calltree file
+\layout Subsection
+
+Enviromental Variables
+\layout Standard
+
+There is a number of enviromental variables that can be used when running
+ SDCC to enable certain optimizations or force a specific program behaviour.
+ these variables are primarily for debugging purposes so they can be enabled/dis
+abled at will.
+\layout Standard
+
+Currently there is only two such variables available:
+\layout List
+\labelwidthstring 00.00.0000
+
+OPTIMIZE_BITFIELD_POINTER_GET when this variable exists reading of structure
+ bitfields is optimized by directly loading FSR0 with the address of the
+ bitfield structure.
+ Normally SDCC will cast the bitfield structure to a bitfield pointer and
+ then load FSR0.
+ This step saves data ram and code space for functions that perform heavy
+ use of bitfields.
+ (ie.
+ 80 bytes of code space are saved when compiling malloc.c with this option).
+
+\layout List
+\labelwidthstring 00.00.0000
+
+NO_REG_OPT do not perform pCode registers optimization.
+ This should be used for debugging purposes.
+ In some where bugs in the pcode optimizer are found, users can benefit
+ from temporarily disabling the optimizer until the bug is fixed.
+\layout Subsection
+
+Preprocessor Macros
+\layout Standard
+
+PIC16 port defines the following preprocessor macros while translating a
+ source.
+\layout Standard
+\align center
+
+\begin_inset Tabular
+<lyxtabular version="3" rows="6" columns="2">
+<features>
+<column alignment="center" valignment="top" leftline="true" width="0">
+<column alignment="center" valignment="top" leftline="true" rightline="true" width="0">
+<row topline="true" bottomline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+Macro
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+Description
+\end_inset
+</cell>
+</row>
+<row topline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+SDCC_pic16
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+Port identification
+\end_inset
+</cell>
+</row>
+<row topline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+_
+\begin_inset ERT
+status Collapsed
+
+\layout Standard
+
+\backslash
+/
+\end_inset
+
+_pic16
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+Port identification (same as above)
+\end_inset
+</cell>
+</row>
+<row topline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+pic18fxxxx
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+MCU Identification.
+
+\emph on
+xxxx
+\emph default
+ is the microcontrol identification number, i.e.
+ 452, 6620, etc
+\end_inset
+</cell>
+</row>
+<row topline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+_
+\begin_inset ERT
+status Collapsed
+
+\layout Standard
+
+\backslash
+/
+\end_inset
+
+_18Fxxxx
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+MCU Identification (same as above)
+\end_inset
+</cell>
+</row>
+<row topline="true" bottomline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+STACK_MODEL_nnn
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+nnn = SMALL or LARGE respectively according to the stack model used
+\end_inset
+</cell>
+</row>
+</lyxtabular>
+
+\end_inset
+
+
+\layout Standard
+
+In addition the following macros are defined when calling assembler:
+\layout Standard
+\align center
+
+\begin_inset Tabular
+<lyxtabular version="3" rows="4" columns="2">
+<features>
+<column alignment="center" valignment="top" leftline="true" width="0">
+<column alignment="center" valignment="top" leftline="true" rightline="true" width="0">
+<row topline="true" bottomline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+Macro
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+Description
+\end_inset
+</cell>
+</row>
+<row topline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+__18Fxxxx
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+MCU Identification.
+
+\emph on
+xxxx
+\emph default
+ is the microcontrol identification number, i.e.
+ 452, 6620, etc
+\end_inset
+</cell>
+</row>
+<row topline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+SDCC_MODEL_nnn
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+nnn = SMALL or LARGE respectively according to the memory model used for
+ SDCC
+\end_inset
+</cell>
+</row>
+<row topline="true" bottomline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+STACK_MODEL_nnn
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+nnn = SMALL or LARGE respectively according to the stack model used
+\end_inset
+</cell>
+</row>
+</lyxtabular>
+
+\end_inset
+
+
+\layout Subsection
+
+Directories
+\layout Standard
+
+PIC16
+\begin_inset LatexCommand \index{PIC16}
+
+\end_inset
+
+ port uses the following directories for searching header files and libraries.
+\layout Standard
+\align center
+
+\begin_inset Tabular
+<lyxtabular version="3" rows="3" columns="4">
+<features>
+<column alignment="center" valignment="top" leftline="true" width="0">
+<column alignment="center" valignment="top" leftline="true" rightline="true" width="0">
+<column alignment="center" valignment="top" width="0">
+<column alignment="center" valignment="top" leftline="true" rightline="true" width="0">
+<row topline="true" bottomline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+Directory
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+Description
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+Target
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+Command prefix
+\end_inset
+</cell>
+</row>
+<row topline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+PREFIX/sdcc/include/pic16
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+PIC16 specific headers
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+Compiler
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+-I
+\end_inset
+</cell>
+</row>
+<row topline="true" bottomline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+PREFIX/sdcc/lib/pic16
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+PIC16 specific libraries
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+Linker
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+-L
+\end_inset
+</cell>
+</row>
+</lyxtabular>
+
+\end_inset
+
+
+\layout Subsection
+
+Pragmas
+\begin_inset LatexCommand \label{sub:PIC16_Pragmas}
+
+\end_inset
+
+
+\layout Standard
+
+PIC16 port currently supports the following pragmas:
+\layout List
+\labelwidthstring 00.00.0000
+
+stack pragma stack forces the code generator to initialize the stack & frame
+ pointers at a specific address.
+ This is an adhoc solution for cases where no STACK directive is available
+ in the linker script or gplink is not instructed to create a stack section.
+\newline
+The stack pragma should be used only once in a project.
+ Multiple pragmas may result in indeterminate behaviour of the program.
+\begin_inset Foot
+collapsed false
+
+\layout Standard
+
+The old format (ie.
+ #pragma stack 0x5ff) is deprecated and will cause the stack pointer to
+ cross page boundaries (or even exceed the available data RAM) and crash
+ the program.
+ Make sure that stack does not cross page boundaries when using the SMALL
+ stack model.
+\end_inset
+
+
+\newline
+The format is as follows:
+\layout LyX-Code
+
+#pragma stack bottom_address [stack_size]
+\layout Standard
+
+
+\emph on
+bottom_address
+\emph default
+ is the lower bound of the stack section.
+ The stack pointer initially will point at address (bottom_address+stack_size-1).
+\layout LyX-Code
+
+Example:
+\layout LyX-Code
+
+\layout LyX-Code
+
+/* initializes stack of 100 bytes at RAM address 0x200 */
+\layout LyX-Code
+
+#pragma stack 0x200 100
+\layout Standard
+
+If the stack_size field is omitted then a stack is created with the default
+ size of 64.
+ This size might be enough for most programs, but its not enough for operations
+ with deep function nesting or excessive stack usage.
+\layout List
+\labelwidthstring 00.00.0000
+
+wparam
+\emph on
+This pragma is deprecated.
+ Its use will cause a warning message to be issued.
+\emph default
+
+\newline
+
+\layout List
+\labelwidthstring 00.00.0000
+
+code place a function symbol at static FLASH address
+\layout LyX-Code
+
+Example:
+\layout LyX-Code
+
+\layout LyX-Code
+
+/* place function test_func at 0x4000 */
+\layout LyX-Code
+
+#pragma code test_func 0x4000
+\layout LyX-Code
+
+\layout List
+\labelwidthstring 00.00.0000
+
+library instructs the linker to use a library module.
+\newline
+Usage:
+\layout LyX-Code
+
+#pragma library module_name
+\layout Standard
+
+
+\emph on
+module_name
+\emph default
+ can be any library or object file (including its path).
+ Note that there are four reserved keywords which have special meaning.
+ These are:
+\layout Standard
+\align center
+
+\begin_inset Tabular
+<lyxtabular version="3" rows="6" columns="3">
+<features>
+<column alignment="center" valignment="top" leftline="true" width="0">
+<column alignment="block" valignment="top" leftline="true" width="20page%">
+<column alignment="left" valignment="top" leftline="true" rightline="true" width="0">
+<row topline="true" bottomline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+Keyword
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+Description
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+Module to link
+\end_inset
+</cell>
+</row>
+<row topline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+
+\series bold
+ignore
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+ignore all library pragmas
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+
+\emph on
+(none)
+\end_inset
+</cell>
+</row>
+<row topline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+
+\series bold
+c
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+link the C library
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+
+\emph on
+libc18f
+\emph default
+.lib
+\end_inset
+</cell>
+</row>
+<row topline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+
+\series bold
+math
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+link the Math libarary
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+
+\emph on
+libm18f
+\emph default
+.lib
+\end_inset
+</cell>
+</row>
+<row topline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+
+\series bold
+io
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+link the I/O library
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+
+\emph on
+libio18f*
+\emph default
+.lib
+\end_inset
+</cell>
+</row>
+<row topline="true" bottomline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+
+\series bold
+debug
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+link the debug library
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+
+\emph on
+libdebug
+\emph default
+.lib
+\end_inset
+</cell>
+</row>
+</lyxtabular>
+
+\end_inset
+
+
+\newline
+* is the device number, i.e.
+ 452 for PIC18F452 MCU.
+\layout Standard
+
+This feature allows for linking with specific libraries withoug having to
+ explicit name them in the command line.
+ Note that the
+\noun on
+ignore
+\noun default
+ keyword will reject all modules specified by the library pragma.
+\layout List
+\labelwidthstring 00.00.0000
+
+udata pragma udata instructs the compiler to emit code so that linker will
+ place a variable at a specific memory bank
+\layout LyX-Code
+
+Example:
+\layout LyX-Code
+
+\layout LyX-Code
+
+/* places variable foo at bank2 */
+\layout LyX-Code
+
+#pragma udata bank2 foo
+\layout LyX-Code
+
+char foo;
+\layout Standard
+
+In order for this pragma to work extra SECTION directives should be added
+ in the .lkr script.
+ In the following example a sample .lkr file is shown:
+\layout LyX-Code
+
+\layout LyX-Code
+
+// Sample linker script for the PIC18F452 processor
+\layout LyX-Code
+
+LIBPATH .
+\layout LyX-Code
+
+CODEPAGE NAME=vectors START=0x0 END=0x29 PROTECTED
+\layout LyX-Code
+
+CODEPAGE NAME=page START=0x2A END=0x7FFF
+\layout LyX-Code
+
+CODEPAGE NAME=idlocs START=0x200000 END=0x200007 PROTECTED
+\layout LyX-Code
+
+CODEPAGE NAME=config START=0x300000 END=0x30000D PROTECTED
+\layout LyX-Code
+
+CODEPAGE NAME=devid START=0x3FFFFE END=0x3FFFFF PROTECTED
+\layout LyX-Code
+
+CODEPAGE NAME=eedata START=0xF00000 END=0xF000FF PROTECTED
+\layout LyX-Code
+
+ACCESSBANK NAME=accessram START=0x0 END=0x7F
+\layout LyX-Code
+
+\layout LyX-Code
+
+DATABANK NAME=gpr0 START=0x80 END=0xFF
+\layout LyX-Code
+
+DATABANK NAME=gpr1 START=0x100 END=0x1FF
+\layout LyX-Code
+
+DATABANK NAME=gpr2 START=0x200 END=0x2FF
+\layout LyX-Code
+
+DATABANK NAME=gpr3 START=0x300 END=0x3FF
+\layout LyX-Code
+
+DATABANK NAME=gpr4 START=0x400 END=0x4FF
+\layout LyX-Code
+
+DATABANK NAME=gpr5 START=0x500 END=0x5FF
+\layout LyX-Code
+
+ACCESSBANK NAME=accesssfr START=0xF80 END=0xFFF PROTECTED
+\layout LyX-Code
+
+\layout LyX-Code
+
+SECTION NAME=CONFIG ROM=config
+\layout LyX-Code
+
+\layout LyX-Code
+
+SECTION NAME=bank0 RAM=gpr0 # these SECTION directives
+\layout LyX-Code
+
+SECTION NAME=bank1 RAM=gpr1 # should be added to link
+\layout LyX-Code
+
+SECTION NAME=bank2 RAM=gpr2 # section name 'bank?' with
+\layout LyX-Code
+
+SECTION NAME=bank3 RAM=gpr3 # a specific DATABANK name
+\layout LyX-Code
+
+SECTION NAME=bank4 RAM=gpr4
+\layout LyX-Code
+
+SECTION NAME=bank5 RAM=gpr5
+\layout Standard
+
+The linker will recognise the section name set in the pragma statement and
+ will position the variable at the memory bank set with the RAM field at
+ the SECTION line in the linker script file.
+\layout Subsection
+
+Header Files
+\begin_inset LatexCommand \label{sub:PIC16_Header-Files}
+
+\end_inset
+
+
+\layout Standard
+
+There is one main header file that can be included to the source files using
+ the pic16 port.
+ That file is the
+\series bold
+pic18fregs.h
+\series default
+.
+ This header file contains the definitions for the processor special registers,
+ so it is necessary if the source accesses them.
+ It can be included by adding the following line in the beginning of the
+ file:
+\layout LyX-Code
+
+#include <pic18fregs.h>
+\layout Standard
+
+The specific microcontroller is selected within the pic18fregs.h automatically,
+ so the same source can be used with a variety of devices.
+\layout Subsection
+
+Libraries
+\layout Standard
+
+The libraries that PIC16
+\begin_inset LatexCommand \index{PIC16}
+
+\end_inset
+
+ port depends on are the microcontroller device libraries which contain
+ the symbol definitions for the microcontroller special function registers.
+ These libraries have the format pic18fxxxx.lib, where
+\emph on
+xxxx
+\emph default
+ is the microcontroller identification number.
+ The specific library is selected automatically by the compiler at link
+ stage according to the selected device.
+\layout Standard
+
+Libraries are created with gplib which is part of the gputils package
+\begin_inset LatexCommand \url{http://sourceforge.net/projects/gputils}
+
+\end_inset
+
+.
+\layout Subsubsection*
+
+Building the libraries
+\layout Standard
+
+Before using SDCC/pic16 there are some libraries that need to be compiled.
+ This process is not done automatically by SDCC since not all users use
+ SDCC for pic16 projects.
+ So each user should compile the libraries separately.
+\layout Standard
+
+The steps to compile the pic16 libraries under Linux are:
+\layout LyX-Code
+
+cd device/lib/pic16
+\layout LyX-Code
+
+./configure
+\layout LyX-Code
+
+make
+\layout LyX-Code
+
+cd ..
+\layout LyX-Code
+
+make model-pic16
+\layout LyX-Code
+
+su -c 'make install' # install the libraries, you need the root password
+\layout Standard
+
+If you need to install the headers too, do:
+\layout LyX-Code
+
+cd device/include
+\layout LyX-Code
+
+su -c 'make install' # install the headers, you need the root password
+\layout Standard
+
+There exist a special target to build the I/O libraries.
+ This target is not automatically build because it will build the I/O library
+ for
+\emph on
+every
+\emph default
+ supported device.
+ This way building will take quite a lot of time.
+ Users are advised to edit the
+\series bold
+device/lib/pic16/pics.build
+\series default
+ file and then execute:
+\layout LyX-Code
+
+make lib-io
+\layout Subsection
+
+Memory Models
+\layout Standard
+
+The following memory models are supported by the PIC16 port:
+\layout Itemize
+
+small model
+\layout Itemize
+
+large model
+\layout Standard
+
+Memory model affects the default size of pointers within the source.
+ The sizes are shown in the next table:
+\layout Standard
+\align center
+
+\begin_inset Tabular
+<lyxtabular version="3" rows="3" columns="3">
+<features>
+<column alignment="center" valignment="top" leftline="true" rightline="true" width="0">
+<column alignment="center" valignment="top" leftline="true" width="0">
+<column alignment="center" valignment="top" leftline="true" rightline="true" width="0">
+<row topline="true" bottomline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+Pointer sizes according to memory model
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+small model
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+large model
+\end_inset
+</cell>
+</row>
+<row topline="true" bottomline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+code pointers
+\end_inset
+</cell>
+<cell multicolumn="1" alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+16-bits
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+24-bits
+\end_inset
+</cell>
+</row>
+<row topline="true" bottomline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+data pointers
+\end_inset
+</cell>
+<cell multicolumn="1" alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+16-bits
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+16-bits
+\end_inset
+</cell>
+</row>
+</lyxtabular>
+
+\end_inset
+
+
+\layout Standard
+
+It is advisable that all sources within a project are compiled with the
+ same memory model.
+ If one wants to override the default memory model, this can be done by
+ declaring a pointer as
+\series bold
+far
+\series default
+ or
+\series bold
+near
+\series default
+.
+ Far selects large memory model's pointers, while near selects small memory
+ model's pointers.
+\layout Standard
+
+The standard device libraries (see
+\begin_inset LatexCommand \ref{sub:PIC16_Header-Files}
+
+\end_inset
+
+) contain no reference to pointers, so they can be used with both memory
+ models.
+\layout Subsection
+
+Stack
+\layout Standard
+
+The stack implementation for the PIC16 port uses two indirect registers,
+ FSR1 and FSR2.
+\layout List
+\labelwidthstring 00.00.0000
+
+FSR1 is assigned as stack pointer
+\layout List
+\labelwidthstring 00.00.0000
+
+FSR2 is assigned as frame pointer
+\layout Standard
+
+The following stack models are supported by the PIC16 port
+\layout Itemize
+
+
+\noun on
+small
+\noun default
+ model
+\layout Itemize
+
+
+\noun on
+large
+\noun default
+ model
+\layout Standard
+
+
+\noun on
+Small
+\noun default
+ model means that only the FSRxL byte is used to access stack and frame,
+ while
+\emph on
+\noun on
+large
+\emph default
+\noun default
+ uses both FSRxL and FSRxH registers.
+ The following table shows the stack/frame pointers sizes according to stack
+ model and the maximum space they can address:
+\layout Standard
+\align center
+
+\begin_inset Tabular
+<lyxtabular version="3" rows="3" columns="3">
+<features>
+<column alignment="center" valignment="top" leftline="true" rightline="true" width="0">
+<column alignment="center" valignment="top" leftline="true" width="0">
+<column alignment="center" valignment="top" leftline="true" rightline="true" width="0">
+<row topline="true" bottomline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+Stack & Frame pointer sizes according to stack model
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+small
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+large
+\end_inset
+</cell>
+</row>
+<row topline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+Stack pointer FSR1
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+8-bits
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+16-bits
+\end_inset
+</cell>
+</row>
+<row topline="true" bottomline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+Frame pointer FSR2
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+8-bits
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+16-bits
+\end_inset
+</cell>
+</row>
+</lyxtabular>
+
+\end_inset
+
+
+\layout Standard
+
+
+\noun on
+Large
+\noun default
+stack model is currently not working properly throughout the code generator.
+ So its use is not advised.
+ Also there are some other points that need special care:
+\newline
+
+\layout Enumerate
+
+Do not create stack sections with size more than one physical bank (that
+ is 256 bytes)
+\layout Enumerate
+
+Stack sections should no cross physical bank limits (i.e.
+ #pragma stack 0x50 0x100)
+\layout Standard
+
+These limitations are caused by the fact that only FSRxL is modified when
+ using SMALL stack model, so no more than 256 bytes of stack can be used.
+ This problem will disappear after LARGE model is fully implemented.
+\layout Subsection
+
+Functions
+\layout Standard
+
+In addition to the standard SDCC function keywords, PIC16 port makes available
+ two more:
+\layout List
+\labelwidthstring 00.00.0000
+
+wparam Use the WREG to pass one byte of the first function argument.
+ This improves speed but you may not use this for functions with arguments
+ that are called via function pointers, otherwise the first byte of the
+ first parameter will get lost.
+ Usage:
+\layout LyX-Code
+
+void func_wparam(int a) wparam
+\layout LyX-Code
+
+{
+\layout LyX-Code
+
+ /* WREG hold the lower part of a */
+\layout LyX-Code
+
+ /* the high part of a is stored in FSR2+2 (or +3 for large stack model)
+ */
+\layout LyX-Code
+
+...
+\layout LyX-Code
+
+}
+\layout Standard
+
+This keyword replaces the deprecated wparam pragma.
+\layout List
+\labelwidthstring 00.00.0000
+
+shadowregs When entering/exiting an ISR, it is possible to take advantage
+ of the PIC18F hardware shadow registers which hold the values of WREG,
+ STATUS and BSR registers.
+ This can be done by adding the keyword
+\emph on
+shadowregs
+\emph default
+ before the
+\emph on
+interrupt
+\emph default
+ keyword in the function's header.
+\layout LyX-Code
+
+void isr_shadow(void) shadowregs interrupt 1
+\layout LyX-Code
+
+{
+\layout LyX-Code
+
+...
+\layout LyX-Code
+
+}
+\layout Standard
+
+
+\emph on
+shadowregs
+\emph default
+ instructs the code generator not to store/restore WREG, STATUS, BSR when
+ entering/exiting the ISR.
+\layout Subsection
+
+Function return values
+\layout Standard
+
+Return values from functions are placed to the appropriate registers following
+ a modified Microchip policy optimized for SDCC.
+ The following table shows these registers:
+\layout Standard
+\align center
+
+\begin_inset Tabular
+<lyxtabular version="3" rows="6" columns="2">
+<features>
+<column alignment="center" valignment="top" leftline="true" width="0">
+<column alignment="center" valignment="top" leftline="true" rightline="true" width="0">
+<row topline="true" bottomline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+size
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+destination register
+\end_inset
+</cell>
+</row>
+<row topline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+8 bits
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+WREG
+\end_inset
+</cell>
+</row>
+<row topline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+16 bits
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+PRODL:WREG
+\end_inset
+</cell>
+</row>
+<row topline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+24 bits
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+PRODH:PRODL:WREG
+\end_inset
+</cell>
+</row>
+<row topline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+32 bits
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+FSR0L:PRODH:PRODL:WREG
+\end_inset
+</cell>
+</row>
+<row topline="true" bottomline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+>32 bits
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+on stack, FSR0 points to the beginning
+\end_inset
+</cell>
+</row>
+</lyxtabular>
+
+\end_inset
+
+
+\layout Subsection
+
+Interrupts
+\layout Standard
+
+An interrupt servive routine (ISR) is declared using the
+\emph on
+interrupt
+\emph default
+ keyword.
+\layout LyX-Code
+
+void isr(void) interrupt
+\emph on
+n
+\layout LyX-Code
+
+{
+\layout LyX-Code
+
+...
+\layout LyX-Code
+
+}
+\layout Standard
+
+
+\emph on
+n
+\emph default
+ is the interrupt number, which for PIC18F devices can be:
+\layout Standard
+\align center
+
+\begin_inset Tabular
+<lyxtabular version="3" rows="4" columns="3">
+<features>
+<column alignment="center" valignment="top" leftline="true" width="0">
+<column alignment="center" valignment="top" leftline="true" width="0">
+<column alignment="center" valignment="top" leftline="true" rightline="true" width="0">
+<row topline="true" bottomline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+
+\emph on
+n
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+Interrupt Vector
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+Interrupt Vector Address
+\end_inset
+</cell>
+</row>
+<row topline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+0
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+RESET vector
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+0x000000
+\end_inset
+</cell>
+</row>
+<row topline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+
+\family roman
+\series medium
+\shape up
+\size normal
+\emph off
+\bar no
+\noun off
+\color none
+1
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+
+\family roman
+\series medium
+\shape up
+\size normal
+\emph off
+\bar no
+\noun off
+\color none
+HIGH priority interrupts
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+0x000008
+\end_inset
+</cell>
+</row>
+<row topline="true" bottomline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+2
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+LOW priority interrupts
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+0x000018
+\end_inset
+</cell>
+</row>
+</lyxtabular>
+
+\end_inset
+
+
+\layout Standard
+
+When generating assembly code for ISR the code generator places a
+\noun on
+goto
+\noun default
+instruction at the
+\emph on
+Interrupt Vector Address
+\emph default
+ which points at the genetated ISR.
+ This single GOTO instruction is part of an automatically generated
+\emph on
+interrupt entry point
+\emph default
+ function.
+ The actuall ISR code is placed as normally would in the code space.
+ Upon interrupt request, the GOTO instruction is executed which jumps to
+ the ISR code.
+ When declaring interrupt functions as _naked this GOTO instruction is
+\series bold
+not
+\series default
+ generated.
+ The whole interrupt functions is therefore placed at the Interrupt Vector
+ Address of the specific interrupt.
+ This is not a problem for the LOW priority interrupts, but it is a problem
+ for the RESET and the HIGH priority interrupts because code may be written
+ at the next interrupt´s vector address and cause undeterminate program
+ behaviour if that interrupt is raised.
+\begin_inset Foot
+collapsed false
+
+\layout Standard
+
+This is not a problem when
+\layout Enumerate
+
+this is a HIGH interrupt ISR and LOW interrupts are
+\emph on
+disabled
+\emph default
+ or not used.
+\layout Enumerate
+
+when the ISR is small enough not to reach the next interrupt´s vector address.
+\end_inset
+
+
+\layout Standard
+
+
+\emph on
+n
+\emph default
+ is possible to be omitted.
+ This way a function is generated similar to an ISR, but it is not assigned
+ to any interrupt.
+\layout Standard
+
+When entering an interrupt, currently the PIC16
+\begin_inset LatexCommand \index{PIC16}
+
+\end_inset
+
+ port automatically saves the following registers:
+\layout Itemize
+
+WREG
+\layout Itemize
+
+STATUS
+\layout Itemize
+
+BSR
+\layout Itemize
+
+PROD (PRODL and PRODH)
+\layout Itemize
+
+FSR0 (FSR0L and FSR0H)
+\layout Standard
+
+These registers are restored upon return from the interrupt routine.
+\begin_inset Foot
+collapsed false
+
+\layout Standard
+
+NOTE that when the _naked attribute is specified for an interrupt routine,
+ then NO registers are stored or restored.
+\end_inset
+
+
+\layout Subsection
+
+Generic Pointers
+\layout Standard
+
+Generic pointers are implemented in PIC16 port as 3-byte (24-bit) types.
+ There are 3 types of generic pointers currently implemented data, code
+ and eeprom pointers.
+ They are differentiated by the value of the 7th and 6th bits of the upper
+ byte:
+\layout Standard
+\align center
+
+\begin_inset Tabular
+<lyxtabular version="3" rows="5" columns="5">
+<features>
+<column alignment="center" valignment="top" leftline="true" rightline="true" width="0">
+<column alignment="center" valignment="top" width="0">
+<column alignment="center" valignment="top" leftline="true" rightline="true" width="0">
+<column alignment="center" valignment="top" width="0">
+<column alignment="left" valignment="top" rightline="true" width="0">
+<row topline="true" bottomline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+pointer type
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+7th bit
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+6th bit
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+rest of the pointer
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+descrption
+\end_inset
+</cell>
+</row>
+<row topline="true" bottomline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+data
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+1
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+0
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+
+\family typewriter
+\shape slanted
+\emph on
+uuuuuu uuuuxxxx xxxxxxxx
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+a 12-bit data pointer in data RAM memory
+\end_inset
+</cell>
+</row>
+<row bottomline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+code
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+0
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+0
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+
+\family typewriter
+\shape slanted
+\emph on
+uxxxxx xxxxxxxx xxxxxxxx
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+a 21-bit code pointer in FLASH memory
+\end_inset
+</cell>
+</row>
+<row bottomline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+eeprom
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+0
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+1
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+
+\family typewriter
+\shape slanted
+\emph on
+uuuuuu uuuuuuxx xxxxxxxx
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+a 10-bit eeprom pointer in EEPROM memory
+\end_inset
+</cell>
+</row>
+<row bottomline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+(unimplemented)
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+1
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+1
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+
+\family typewriter
+\shape slanted
+\emph on
+xxxxxx xxxxxxxx xxxxxxxx
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+unimplemented pointer type
+\end_inset
+</cell>
+</row>
+</lyxtabular>
+
+\end_inset
+
+
+\layout Standard
+
+Generic pointer are read and written with a set of library functions which
+ read/write 1, 2, 3, 4 bytes.
+\layout Subsection
+
+PIC16 C Libraries
+\layout Subsubsection
+
+Standard I/O Streams
+\layout Standard
+
+In the
+\emph on
+stdio.h
+\emph default
+ the type FILE is defined as:
+\layout LyX-Code
+
+typedef char * FILE;
+\layout Standard
+
+This type is the stream type implemented I/O in the PIC18F devices.
+ Also the standard input and output streams are declared in stdio.h:
+\layout LyX-Code
+
+extern FILE * stdin;
+\layout LyX-Code
+
+extern FILE * stdout;
+\layout Standard
+
+The FILE type is actually a generic pointer which defines one more type
+ of generic pointers, the
+\emph on
+stream
+\emph default
+pointer.
+ This new type has the format:
+\layout Standard
+\align center
+
+\begin_inset Tabular
+<lyxtabular version="3" rows="2" columns="7">
+<features>
+<column alignment="center" valignment="top" leftline="true" rightline="true" width="0">
+<column alignment="center" valignment="top" width="0">
+<column alignment="center" valignment="top" leftline="true" width="0">
+<column alignment="center" valignment="top" leftline="true" width="0">
+<column alignment="center" valignment="top" leftline="true" rightline="true" width="0">
+<column alignment="center" valignment="top" width="0">
+<column alignment="left" valignment="top" rightline="true" width="0">
+<row topline="true" bottomline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+pointer type
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+<7:6>
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+<5>
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+<4>
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+<3:0>
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+rest of the pointer
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+descrption
+\end_inset
+</cell>
+</row>
+<row topline="true" bottomline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+stream
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+00
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+1
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+0
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+nnnn
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+
+\family typewriter
+\shape slanted
+\emph on
+uuuuuuuu uuuuuuuu
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+upper byte high nubble is 0x2n, the rest are zeroes
+\end_inset
+</cell>
+</row>
+</lyxtabular>
+
+\end_inset
+
+
+\layout Standard
+
+Currently implemented there are 3 types of streams defined:
+\layout Standard
+\align center
+
+\begin_inset Tabular
+<lyxtabular version="3" rows="4" columns="4">
+<features>
+<column alignment="center" valignment="top" leftline="true" width="0">
+<column alignment="center" valignment="top" leftline="true" width="0">
+<column alignment="center" valignment="top" leftline="true" width="0">
+<column alignment="center" valignment="top" leftline="true" rightline="true" width="0">
+<row topline="true" bottomline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+stream type
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+value
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+module
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+description
+\end_inset
+</cell>
+</row>
+<row topline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+STREAM_USART
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+
+\family typewriter
+0x200000UL
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+USART
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+Writes/Reads characters via the USART peripheral
+\end_inset
+</cell>
+</row>
+<row topline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+STREAM_MSSP
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+
+\family typewriter
+0x210000UL
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+MSSP
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+Writes/Reads characters via the MSSP peripheral
+\end_inset
+</cell>
+</row>
+<row topline="true" bottomline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+STREAM_USER
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+
+\family typewriter
+0x2f0000UL
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+(none)
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+Writes/Reads characters via used defined functions
+\end_inset
+</cell>
+</row>
+</lyxtabular>
+
+\end_inset
+
+
+\layout Standard
+
+The stream identifiers are declared as macros in the stdio.h header.
+\layout Standard
+
+In the libc library there exist the functions that are used to write to
+ each of the above streams.
+ These are
+\layout List
+\labelwidthstring 00.00.0000
+
+_
+\begin_inset ERT
+status Collapsed
+
+\layout Standard
+
+\backslash
+/
+\end_inset
+
+_stream_usart_putchar writes a character at the USART stream
+\layout List
+\labelwidthstring 00.00.0000
+
+_
+\begin_inset ERT
+status Collapsed
+
+\layout Standard
+
+\backslash
+/
+\end_inset
+
+_stream_mssp_putchar writes a character at the MSSP stream
+\layout List
+\labelwidthstring 00.00.0000
+
+putchar dummy function.
+ This writes a character to a user specified manner.
+\layout Standard
+
+In order to increase performance
+\emph on
+putchar
+\emph default
+is declared in stdio.h as having its parameter in WREG (it has the wparam
+ keyword).
+ In stdio.h exists the macro PUTCHAR(arg) that defines the putchar function
+ in a user-friendly way.
+
+\emph on
+arg
+\emph default
+ is the name of the variable that holds the character to print.
+ An example follows:
+\layout LyX-Code
+
+#include <pic18fregs.h>
+\newline
+#include <stdio.h>
+\newline
+
+\newline
+PUTCHAR( c )
+\layout LyX-Code
+
+{
+\layout LyX-Code
+
+ PORTA = c; /* dump character c to PORTA */
+\layout LyX-Code
+
+}
+\newline
+
+\newline
+void main(void)
+\layout LyX-Code
+
+{
+\layout LyX-Code
+
+ stdout = STREAM_USER; /* this is not necessery, since stdout points
+\layout LyX-Code
+
+ * by default to STREAM_USER */
+\layout LyX-Code
+
+ printf (¨This is a printf test
+\backslash
+n¨);
+\layout LyX-Code
+
+}
+\layout LyX-Code
+
+\layout Subsubsection
+
+Printing functions
+\layout Standard
+
+PIC16 contains an implementation of the printf-family of functions.
+ There exist the following functions:
+\layout LyX-Code
+
+extern unsigned int sprintf(char *buf, char *fmt, ...);
+\layout LyX-Code
+
+extern unsigned int vsprintf(char *buf, char *fmt, va_list ap);
+\layout LyX-Code
+
+\layout LyX-Code
+
+extern unsigned int printf(char *fmt, ...);
+\layout LyX-Code
+
+extern unsigned int vprintf(char *fmt, va_lista ap);
+\layout LyX-Code
+
+\layout LyX-Code
+
+extern unsigned int fprintf(FILE *fp, char *fmt, ...);
+\layout LyX-Code
+
+extern unsigned int vfprintf(FILE *fp, char *fmt, va_list ap);
+\layout Standard
+
+For sprintf and vsprintf
+\emph on
+buf
+\emph default
+should normally be a data pointer where the resulting string will be placed.
+ No range checking is done so the user should allocate the necessery buffer.
+ For fprintf and vfprintf
+\emph on
+fp
+\emph default
+ should be a stream pointer (i.e.
+ stdout, STREAM_MSSP, etc...).
+\layout Subsubsection
+
+Signals
+\layout Standard
+
+The PIC18F family of microcontrollers supports a number of interrupt sources.
+ A list of these interrupts is shown in the following table:
+\layout Standard
+\align center
+
+\begin_inset Tabular
+<lyxtabular version="3" rows="11" columns="4">
+<features>
+<column alignment="left" valignment="top" leftline="true" width="0">
+<column alignment="center" valignment="top" leftline="true" rightline="true" width="0">
+<column alignment="left" valignment="top" leftline="true" width="0">
+<column alignment="center" valignment="top" leftline="true" rightline="true" width="0">
+<row topline="true" bottomline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+signal name
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+description
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+signal name
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+descritpion
+\end_inset
+</cell>
+</row>
+<row topline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+SIG_RB
+\end_inset
+</cell>
+<cell multicolumn="1" alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+PORTB change interrupt
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+SIG_EE
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+EEPROM/FLASH write complete interrupt
+\end_inset
+</cell>
+</row>
+<row topline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+SIG_INT0
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+INT0 external interrupt
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+SIG_BCOL
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+Bus collision interrupt
+\end_inset
+</cell>
+</row>
+<row topline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+SIG_INT1
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+INT1 external interrupt
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+SIG_LVD
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+Low voltage detect interrupt
+\end_inset
+</cell>
+</row>
+<row topline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+SIG_INT2
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+INT2 external interrupt
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+SIG_PSP
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+Parallel slave port interrupt
+\end_inset
+</cell>
+</row>
+<row topline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+SIG_CCP1
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+CCP1 module interrupt
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+SIG_AD
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+AD convertion complete interrupt
+\end_inset
+</cell>
+</row>
+<row topline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+SIG_CCP2
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+CCP2 module interrupt
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+SIG_RC
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+USART receive interrupt
+\end_inset
+</cell>
+</row>
+<row topline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+SIG_TMR0
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+TMR0 overflow interrupt
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+SIG_TX
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+USART transmit interrupt
+\end_inset
+</cell>
+</row>
+<row topline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+SIG_TMR1
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+TMR1 overflow interrupt
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+SIG_MSSP
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+SSP receive/transmit interrupt
+\end_inset
+</cell>
+</row>
+<row topline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+SIG_TMR2
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+TMR2 matches PR2 interrupt
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+\end_inset
+</cell>
+</row>
+<row topline="true" bottomline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+SIG_TMR3
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+TMR3 overflow interrupt
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+\end_inset
+</cell>
+</row>
+</lyxtabular>
+
+\end_inset
+
+
+\layout Standard
+
+The prototypes for these names are defined in the header file
+\emph on
+signal.h
+\emph default
+ .
+\layout Standard
+
+In order to simplify signal handling, a number of macros is provided:
+\layout List
+\labelwidthstring 00.00.0000
+
+DEF_INTHIGH(name) begin the definition of the interrupt dispatch table for
+ high priority interrupts.
+
+\emph on
+name
+\emph default
+ is the function name to use.
+\layout List
+\labelwidthstring 00.00.0000
+
+DEF_INTLOW(name) begin the definition of the interrupt dispatch table fo
+ low priority interrupt.
+
+\emph on
+name
+\emph default
+ is the function name to use.
+\layout List
+\labelwidthstring 00.00.0000
+
+DEF_HANDLER(sig,handler) define a handler for signal
+\emph on
+sig.
+\layout List
+\labelwidthstring 00.00.0000
+
+END_DEF end the declaration of the dispatch table.
+\layout Standard
+
+Additionally there are two more macros to simplify the declaration of the
+ signal handler:
+\layout List
+\labelwidthstring 00.00.0000
+
+
+\series medium
+SIGHANDLER(handler)
+\series default
+this declares the function prototype for the
+\emph on
+handler
+\emph default
+ function.
+\layout List
+\labelwidthstring 00.00.0000
+
+SIGHANDLERNAKED(handler) same as SIGHANDLER() but declares a naked function.
+\layout Standard
+
+An example of using the macros above is shown below:
+\layout LyX-Code
+
+#include <pic18fregs.h>
+\layout LyX-Code
+
+#include <signal.h>
+\newline
+
+\newline
+DEF_INTHIGH(high_int)
+\layout LyX-Code
+
+DEF_HANDLER(SIG_TMR0, _tmr0_handler)
+\layout LyX-Code
+
+DEF_HANDLER(SIG_BCOL, _bcol_handler)
+\layout LyX-Code
+
+END_DEF
+\newline
+
+\newline
+SIGHANDLER(_tmr0_handler)
+\layout LyX-Code
+
+{
+\layout LyX-Code
+
+ /* action to be taken when timer 0 overflows */
+\layout LyX-Code
+
+}
+\newline
+
+\newline
+SIGHANDLERNAKED(_bcol_handler)
+\layout LyX-Code
+
+{
+\layout LyX-Code
+
+ _asm
+\layout LyX-Code
+
+ /* action to be taken when bus collision occurs */
+\layout LyX-Code
+
+ retfie
+\layout LyX-Code
+
+ _endasm;
+\layout LyX-Code
+
+}
+\layout Standard
+
+
+\series bold
+NOTES:
+\series default
+ Special care should be taken when using the above scheme:
+\layout Itemize
+
+do not place a colon (;) at the end of the DEF_* and END_DEF macros.
+\layout Itemize
+
+when declaring SIGHANDLERNAKED handler never forget to use
+\emph on
+retfie
+\emph default
+ for proper returning.
+\layout Subsection
+
+PIC16 Port -- Tips
+\layout Standard
+
+Here you can find some general tips for compiling programs with SDCC/pic16.
+\layout Subsubsection
+
+Stack size
+\layout Standard
+
+The default stack size (that is 64 bytes) probably is enough for many programs.
+ One must take care that when there are many levels of function nesting,
+ or there is excessive usage of stack, its size should be extended.
+ An example of such a case is the printf/sprintf family of functions.
+ If you encounter problems like not being able to print integers, then you
+ need to set the stack size around the maximum (256 for small stack model).
+ The following diagram shows what happens when calling printf to print an
+ integer:
+\layout LyX-Code
+printf () --> ltoa () --> ultoa () --> divschar ()
+\layout Standard
-\newline
+It is should be understood that stack is easily consumed when calling complicate
+d functions.
+ Using command line arguments like -
+\begin_inset ERT
+status Collapsed
+
+\layout Standard
+\backslash
+/
+\end_inset
+
+-fommit-frame-pointer might reduce stack usage by not creating unnecessery
+ stack frames.
+ Other ways to reduce stack usage may exist.
\layout Chapter
Debugging with SDCDB
Compiling for Debugging
\layout Standard
-The \SpecialChar \-
-\SpecialChar \-
-debug option must be specified for all files for which debug information
- is to be generated.
+The -
+\begin_inset ERT
+status Collapsed
+
+\layout Standard
+
+\backslash
+/
+\end_inset
+
+-debug
+\begin_inset LatexCommand \index{-\/-debug}
+
+\end_inset
+
+ option must be specified for all files for which debug information is to
+ be generated.
The complier generates a .adb file for each of these files.
- The linker creates the .cdb file from the .adb files and the address information.
+ The linker creates the .cdb
+\begin_inset LatexCommand \index{<file>.cdb}
+
+\end_inset
+
+ file from the .adb
+\begin_inset LatexCommand \index{<file>.adb}
+
+\end_inset
+
+ files and the address information.
This .cdb is used by the debugger.
\layout Section
object file.
\layout Section
-Command Line Options.
+Command Line Options
\layout Itemize
-
-k <port number> passed to simulator see the simulator docs for details.
\layout Section
-Debugger Commands.
+Debugger Commands
\layout Standard
As mentioned earlier the command interface for the debugger has been deliberatel
y kept as close the GNU debugger gdb, as possible.
This will help the integration with existing graphical user interfaces
(like ddd, xxgdb or xemacs) existing for the GNU debugger.
- If you use a graphical user interface for the debugger you can skip the
- next sections.
+ If you use a graphical user interface for the debugger you can skip this
+ section.
\layout Subsubsection*
break [line | file:line | function | file:function]
My name is Bobby Brown"
\layout Section
+Interfacing with DDD
+\layout Standard
+
+Figure
+\begin_inset LatexCommand \ref{fig:ddd_screenshot}
+
+\end_inset
+
+ shows a debugging session with DDD
+\begin_inset LatexCommand \index{DDD (debugger)}
+
+\end_inset
+
+ (Unix only) on a simulated 8032.
+ The debugger allows setting of breakpoints, displaying and changing variables,
+ single stepping through C and assembler code.
+
+\layout Standard
+
+
+\begin_inset Note
+collapsed false
+
+\layout Standard
+
+The screenshot was converted from png to eps with:
+\layout Standard
+
+bmeps -c -e8f -p3 ddd_example.png >ddd_example.eps
+\layout Standard
+
+Which produces a pretty compact eps file which is free from compression
+ artifacts.
+
+\end_inset
+
+
+\layout Standard
+
+
+\begin_inset Float figure
+placement htbp
+wide false
+collapsed false
+
+\layout Standard
+\align center
+
+\begin_inset Graphics
+ filename figures/ddd_example.eps
+ display color
+ width 100text%
+ rotateOrigin center
+
+\end_inset
+
+
+\layout Caption
+
+
+\begin_inset LatexCommand \label{fig:ddd_screenshot}
+
+\end_inset
+
+Debugging session with DDD on a simulated 8032.
+ Debugging might not run as smoothly as the screenshot suggests
+.
+\end_inset
+
+
+\layout Standard
+
+Insiders familiar with the gdb commands (previous section) can enter them
+ in the lowermost frame of the screenshot.
+ The source was compiled with
+\family sans
+\series bold
+
+\newline
+
+\newline
+sdcc -
+\family default
+\series default
+
+\begin_inset ERT
+status Collapsed
+
+\layout Standard
+
+\backslash
+/
+\end_inset
+
+
+\family sans
+\series bold
+-debug ddd_example.c
+\family default
+\series default
+
+\family sans
+\series bold
+
+\newline
+
+\family default
+\series default
+
+\newline
+and DDD was invoked with
+\family sans
+\series bold
+
+\newline
+
+\newline
+ddd -debugger 'sdcdb -cpu 8032 ddd_example'
+\layout Section
+
Interfacing with XEmacs
\begin_inset LatexCommand \index{XEmacs}
\end_inset
-.
+
\layout Standard
Two files (in emacs lisp) are provided for the interfacing with XEmacs,
\family typewriter
\newline
-;; Current Listing ::
+;;\SpecialChar ~
+Current Listing ::
\newline
;;key\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
-\SpecialChar ~
binding\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
+-------\SpecialChar ~
\SpecialChar ~
-------\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
-\SpecialChar ~
---------
+-------
\newline
;;
\newline
-;; n\SpecialChar ~
+;;\SpecialChar ~
+n\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
- sdcdb-next-from-src\SpecialChar ~
+\SpecialChar ~
+sdcdb-next-from-src\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
SDCDB next command
\newline
-;; b\SpecialChar ~
+;;\SpecialChar ~
+b\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
- sdcdb-back-from-src\SpecialChar ~
+\SpecialChar ~
+sdcdb-back-from-src\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
SDCDB back command
\newline
-;; c\SpecialChar ~
+;;\SpecialChar ~
+c\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
- sdcdb-cont-from-src\SpecialChar ~
+\SpecialChar ~
+sdcdb-cont-from-src\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
SDCDB continue command
\newline
-;; s\SpecialChar ~
+;;\SpecialChar ~
+s\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
- sdcdb-step-from-src\SpecialChar ~
+\SpecialChar ~
+sdcdb-step-from-src\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
SDCDB step command
\newline
-;; ?\SpecialChar ~
+;;\SpecialChar ~
+?\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
- sdcdb-whatis-c-sexp\SpecialChar ~
+\SpecialChar ~
+sdcdb-whatis-c-sexp\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
- buffer point
+\SpecialChar ~
+buffer point
\newline
-;; x\SpecialChar ~
+;;\SpecialChar ~
+x\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
- sdcdbsrc-delete\SpecialChar ~
+\SpecialChar ~
+sdcdbsrc-delete\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
+\SpecialChar ~
given or delete arg (C-u arg x)
\newline
-;; m\SpecialChar ~
+;;\SpecialChar ~
+m\SpecialChar ~
+\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
- sdcdbsrc-frame\SpecialChar ~
+sdcdbsrc-frame\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
buffer point
\newline
-;; !\SpecialChar ~
+;;\SpecialChar ~
+!\SpecialChar ~
+\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
- sdcdbsrc-goto-sdcdb\SpecialChar ~
+sdcdbsrc-goto-sdcdb\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
Goto the SDCDB output buffer
\newline
-;; p\SpecialChar ~
+;;\SpecialChar ~
+p\SpecialChar ~
+\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
- sdcdb-print-c-sexp\SpecialChar ~
+sdcdb-print-c-sexp\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
- buffer point
+\SpecialChar ~
+buffer point
\newline
-;; g\SpecialChar ~
+;;\SpecialChar ~
+g\SpecialChar ~
+\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
- sdcdbsrc-goto-sdcdb\SpecialChar ~
+sdcdbsrc-goto-sdcdb\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
Goto the SDCDB output buffer
\newline
-;; t\SpecialChar ~
+;;\SpecialChar ~
+t\SpecialChar ~
+\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
- sdcdbsrc-mode\SpecialChar ~
+sdcdbsrc-mode\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\newline
;;
\newline
-;; C-c C-f\SpecialChar ~
+;;\SpecialChar ~
+C-c\SpecialChar ~
+C-f\SpecialChar ~
+\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
- sdcdb-finish-from-src\SpecialChar ~
+sdcdb-finish-from-src\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\newline
;;
\newline
-;; C-x SPC\SpecialChar ~
+;;\SpecialChar ~
+C-x\SpecialChar ~
+SPC\SpecialChar ~
+\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
- sdcdb-break\SpecialChar ~
+sdcdb-break\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
Set break for line with point
\newline
-;; ESC t\SpecialChar ~
+;;\SpecialChar ~
+ESC\SpecialChar ~
+t\SpecialChar ~
+\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
- sdcdbsrc-mode\SpecialChar ~
+sdcdbsrc-mode\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
Toggle Sdcdbsrc mode
\newline
-;; ESC m\SpecialChar ~
+;;\SpecialChar ~
+ESC\SpecialChar ~
+m\SpecialChar ~
+\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
- sdcdbsrc-srcmode\SpecialChar ~
+sdcdbsrc-srcmode\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
- Toggle list mode
+\SpecialChar ~
+Toggle list mode
\newline
;;
\newline
use an 'unsigned char' instead of a 'short' or 'int'.
Please note, that ANSI C requires both signed and unsigned chars to be
promoted to 'signed int' before doing any operation.
- This promotion can be omitted, if the result is the same.
+ This promotion
+\begin_inset LatexCommand \index{type promotion}
+
+\end_inset
+
+ can be omitted, if the result is the same.
The effect of the promotion rules together with the sign-extension is often
- supprising:
+ surprising:
\begin_deeper
\layout Verse
<features>
<column alignment="center" valignment="top" leftline="true" width="0pt">
<column alignment="center" valignment="top" leftline="true" width="0pt">
-<column alignment="center" valignment="top" leftline="true" rightline="true" width="0pt">
+<column alignment="left" valignment="top" leftline="true" rightline="true" width="0pt">
<row topline="true" bottomline="true">
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
\layout Standard
-ASXXXX Assemblers and ASLINK Relocating Linker
+ASXXXX
+\begin_inset LatexCommand \index{asXXXX (as-gbz80, as-hc08, asx8051, as-z80)}
+
+\end_inset
+
+
+\begin_inset LatexCommand \index{Assembler documentation}
+
+\end_inset
+
+ Assemblers and ASLINK
+\begin_inset LatexCommand \index{aslink}
+
+\end_inset
+
+
+\begin_inset LatexCommand \index{Linker documentation}
+
+\end_inset
+
+ Relocating Linker
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\align center
\begin_inset Tabular
-<lyxtabular version="3" rows="10" columns="3">
+<lyxtabular version="3" rows="11" columns="3">
<features>
<column alignment="center" valignment="top" leftline="true" width="0pt">
<column alignment="block" valignment="top" leftline="true" width="30line%">
-<column alignment="center" valignment="top" leftline="true" rightline="true" width="0pt">
+<column alignment="left" valignment="top" leftline="true" rightline="true" width="0pt">
<row topline="true" bottomline="true">
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
\layout Standard
gpsim
-\begin_inset LatexCommand \index{gpsim (PIC simulator)}
+\begin_inset LatexCommand \index{gpsim (pic simulator)}
\end_inset
\end_inset
+\end_inset
+</cell>
+</row>
+<row topline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+gputils
+\begin_inset LatexCommand \index{gputils (pic tools)}
+
+\end_inset
+
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+GNU PIC utilities
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+
+\begin_inset LatexCommand \url{http://sourceforge.net/projects/gputils}
+
+\end_inset
+
+
\end_inset
</cell>
</row>
\layout Standard
-\begin_inset LatexCommand \url{http://digilander.libero.it/fbradasc/FLP5.html}
+\begin_inset LatexCommand \url{http://freshmeat.net/projects/flp5/}
\end_inset
\layout Standard
-\begin_inset LatexCommand \url{http://home.hccnet.nl/d.ingamells/beautify.html}
+\begin_inset LatexCommand \url{http://directory.fsf.org/GNU/indent.html}
\end_inset
\layout Standard
srecord
-\begin_inset LatexCommand \index{srecord (tool)}
+\begin_inset LatexCommand \index{srecord (bin, hex, ... tool)}
\end_inset
\layout Standard
-\begin_inset LatexCommand \url{http://srecord.sourceforge.net/}
+\begin_inset LatexCommand \url{http://sourceforge.net/projects/srecord}
\end_inset
\layout Standard
-Statically checks c sources
+Statically checks c sources (see
+\begin_inset LatexCommand \ref{lyx:more-pedantic-SPLINT}
+
+\end_inset
+
+)
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\align center
\begin_inset Tabular
-<lyxtabular version="3" rows="4" columns="3">
+<lyxtabular version="3" rows="6" columns="3">
<features>
<column alignment="center" valignment="top" leftline="true" width="0pt">
<column alignment="block" valignment="top" leftline="true" width="30line%">
\layout Standard
-C Reference Card
-\begin_inset LatexCommand \index{C Reference card}
-
-\end_inset
-
-, 2 pages
+C Reference Card
+\begin_inset LatexCommand \index{C Reference card}
+
+\end_inset
+
+, 2 pages
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+
+\begin_inset LatexCommand \url{http://refcards.com/refcards/c/index.html}
+
+\end_inset
+
+
+\end_inset
+</cell>
+</row>
+<row topline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+c-faq
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+C-FAQ-list
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\layout Standard
-\begin_inset LatexCommand \url{http://www.refcards.com/about/c.html}
+\begin_inset LatexCommand \url{http://www.eskimo.com/~scs/C-faq/top.html}
\end_inset
\layout Standard
-c-faq
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\layout Standard
-C-FAQ-list
+Latest datasheet of the target CPU
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\layout Standard
+vendor
+\end_inset
+</cell>
+</row>
+<row topline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
-\begin_inset LatexCommand \url{http://www.eskimo.com/~scs/C-faq/top.html}
+\layout Standard
+Revision history of datasheet
\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+\layout Standard
+vendor
\end_inset
</cell>
</row>
is the project done if you think it is done? Or is just that other interface/pro
tocol/feature/configuration/option missing? How about website, manual(s),
- internationalization, packaging, labels, electromagnetic compatability/interfer
-ence, documentation for production, production test software, update mechanism,
- patent issues?
+ internationali(z|s)ation, packaging, labels, 2nd source for components,
+ electromagnetic compatability/interference, documentation for production,
+ production test software, update mechanism, patent issues?
\layout Itemize
is your project adequately positioned in that magic triangle: fame, fortune,
.
You'll find the complete set of mailing lists
-\begin_inset LatexCommand \index{Mailing list}
+\begin_inset LatexCommand \index{Mailing list(s)}
\end_inset
\layout Enumerate
-Specify the SDCC version (type "sdcc -v"), your platform, and operating
- system.
+Specify the SDCC version (type "
+\family sans
+\series bold
+sdcc -v
+\family default
+\series default
+"), your platform, and operating system.
\layout Enumerate
.
\layout Section
+Submitting patches
+\layout Standard
+
+Like bug reports contributed patches are forwarded to the developer mailing
+ list.
+ This is the link for submitting patches
+\begin_inset LatexCommand \index{Patch submission}
+
+\end_inset
+
+:
+\begin_inset LatexCommand \url{http://sourceforge.net/tracker/?group_id=599&atid=300599}
+
+\end_inset
+
+.
+\layout Standard
+
+You need to specify some parameters to the
+\family typewriter
+diff
+\family default
+ command for the patches to be useful.
+ If you modified more than one file a patch created f.e.
+ with
+\family sans
+\series bold
+
+\begin_inset Quotes sld
+\end_inset
+
+diff -Naur unmodified_directory modified_directory >my_changes.patch
+\begin_inset Quotes srd
+\end_inset
+
+
+\family default
+\series default
+ will be fine, otherwise
+\family sans
+\series bold
+
+\begin_inset Quotes sld
+\end_inset
+
+diff -u sourcefile.c.orig sourcefile.c >my_changes.patch
+\begin_inset Quotes srd
+\end_inset
+
+
+\series default
+
+\family default
+will do.
+\layout Section
+
Getting Help
\layout Standard
\end_inset
-, lists and forums are archived and searchable so if you are lucky someone
- already had a similar problem.
+, lists
+\begin_inset LatexCommand \index{Mailing list(s)}
+
+\end_inset
+
+ and forums are archived and searchable so if you are lucky someone already
+ had a similar problem.
+ While mails to the lists themselves are delivered promptly their web front
+ end on sourceforge sometimes shows a severe time lag (up to several weeks),
+ if you're seriously using SDCC please consider subscribing to the lists.
\layout Section
ChangeLog
\size footnotesize
-\begin_inset LatexCommand \htmlurl{http://cvs.sourceforge.net/cgi-bin/viewcvs.cgi/*checkout*/sdcc/sdcc/ChangeLog?rev=HEAD&content-type=text/plain}
+\begin_inset LatexCommand \htmlurl{http://cvs.sf.net/cgi-bin/viewcvs.cgi/*checkout*/sdcc/sdcc/ChangeLog?rev=HEAD&content-type=text/plain}
\end_inset
Historically there often were long delays between official releases and
the sourceforge download area tends to get not updated at all.
- Current excuses might refer to problems with live range analysis, but if
- this is fixed, the next problem rising is that another excuse will have
- to be found.
+ Excuses in the past might have referred to problems with live range analysis,
+ but as this was fixed a while ago, the current problem is that another
+ excuse has to be found.
Kidding aside, we have to get better there! On the other hand there are
daily snapshots available at
\begin_inset LatexCommand \htmlurl[snap]{http://sdcc.sourceforge.net/snap.php}
\end_inset
-, and you can always built the very last version (hopefully with many bugs
+, and you can always build the very last version (hopefully with many bugs
fixed, and features added) from the source code available at
\begin_inset LatexCommand \htmlurl[Source]{http://sdcc.sourceforge.net/snap.php#Source}
More examples and libraries are available at
\emph on
The SDCC Open Knowledge Resource
-\begin_inset LatexCommand \url{http://www.qsl.net/dl9sec/SDCC_OKR.html}
+\begin_inset LatexCommand \url{http://sdccokr.dl9sec.de/}
\end_inset
in this directory (or f.e.
\family sans
+\series bold
+
+\begin_inset Quotes sld
+\end_inset
+
make test-mcs51
+\begin_inset Quotes srd
+\end_inset
+
+
\family default
+\series default
if you don't want to run the complete tests).
The test code might also be interesting if you want to look for examples
\begin_inset LatexCommand \index{Examples}
\SpecialChar ~
global = 2;
\newline
-\SpecialChar ~
-\SpecialChar ~
-return;
-\newline
}
\layout Subsection
\end_inset
+\begin_inset LatexCommand \label{sub:Loop-Optimizations}
+
+\end_inset
+
+
\layout Standard
-Two types of loop optimizations are done by SDCC loop invariant lifting
- and strength reduction of loop induction variables.
+Two types of loop optimizations are done by SDCC
+\emph on
+loop invariant
+\emph default
+ lifting and
+\emph on
+ strength reduction
+\emph default
+ of loop induction variables.
In addition to the strength reduction the optimizer marks the induction
variables and the register allocator tries to keep the induction variables
in registers for the duration of the loop.
\layout Standard
-SDCC changes switch statements to jump tables
+SDCC can optimize switch statements to jump tables
\begin_inset LatexCommand \index{jump tables}
\end_inset
- when the following conditions are true.
-
+.
+ It makes the decision based on an estimate of the generated code size.
+ SDCC is quite liberal in the requirements for jump table generation:
\layout Itemize
-The case labels are in numerical sequence, the labels need not be in order,
- and the starting number need not be one or zero.
+The labels need not be in order, and the starting number need not be one
+ or zero, the case labels are in numerical sequence or not too many case
+ labels are missing.
\begin_deeper
\layout Verse
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
-case 2: ...
-
+
\newline
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
-case 3: ...
+case 3: ...
+
+\newline
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+case 7: ...\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+case 4: ...
+
+\newline
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+case 8: ...\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+case 5: ...
+
+\newline
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+case 9: ...\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+case 6: ...
+
+\newline
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+case 10: ...\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+case 7: ...
+
+\newline
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+case 11: ...\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+case 8: ...
\newline
}\SpecialChar ~
\end_deeper
\layout Itemize
-The number of case labels is at least three, since it takes two conditional
- statements to handle the boundary conditions.
+The number of case labels is not larger than supported by the target architectur
+e.
+\layout Itemize
+
+If the case labels are not in numerical sequence ('gaps' between cases)
+ SDCC checks whether a jump table with additionally inserted dummy cases
+ is still attractive.
+
\layout Itemize
-The number of case labels is less than 84, since each label takes 3 bytes
- and a jump-table can be utmost 256 bytes long.
+If the starting number is not zero and a check for the lower boundary of
+ the jump-table can thus be eliminated SDCC might insert dummy cases 0,
+ ...
+ .
\layout Standard
-Switch statements which have gaps in the numeric sequence or those that
- have more that 84 case labels can be split into more than one switch statement
+Switch statements which have large gaps in the numeric sequence or those
+ that have too many case labels can be split into more than one switch statement
for efficient code generation, e.g.:
\layout Verse
\newline
\SpecialChar ~
\SpecialChar ~
-case 9: ...
+case 5: ...
+
+\newline
+\SpecialChar ~
+\SpecialChar ~
+case 6: ...
+
+\newline
+\SpecialChar ~
+\SpecialChar ~
+case 7: ...
+
+\newline
+\SpecialChar ~
+\SpecialChar ~
+case 101: ...
+
+\newline
+\SpecialChar ~
+\SpecialChar ~
+case 102: ...
+
+\newline
+\SpecialChar ~
+\SpecialChar ~
+case 103: ...
+
+\newline
+\SpecialChar ~
+\SpecialChar ~
+case 104: ...
\newline
\SpecialChar ~
\SpecialChar ~
-case 10: ...
+case 105: ...
\newline
\SpecialChar ~
\SpecialChar ~
-case 11: ...
+case 106: ...
\newline
\SpecialChar ~
\SpecialChar ~
-case 12: ...
+case 107: ...
\newline
}
\SpecialChar ~
case 4: ...
+\newline
+\SpecialChar ~
+\SpecialChar ~
+case 5: ...
+
+\newline
+\SpecialChar ~
+\SpecialChar ~
+case 6: ...
+
+\newline
+\SpecialChar ~
+\SpecialChar ~
+case 7: ...
+
\newline
}
\layout Standard
\newline
\SpecialChar ~
\SpecialChar ~
-case 9:\SpecialChar ~
+case 101: ...
+
+\newline
\SpecialChar ~
-...
+\SpecialChar ~
+case 102: ...
\newline
\SpecialChar ~
\SpecialChar ~
-case 10:\SpecialChar ~
-...
+case 103: ...
\newline
\SpecialChar ~
\SpecialChar ~
-case 11:\SpecialChar ~
-...
+case 104: ...
\newline
\SpecialChar ~
\SpecialChar ~
-case 12:\SpecialChar ~
-...
+case 105: ...
+
+\newline
+\SpecialChar ~
+\SpecialChar ~
+case 106: ...
+
+\newline
+\SpecialChar ~
+\SpecialChar ~
+case 107: ...
\newline
}
then both the switch statements will be implemented using jump-tables whereas
the unmodified switch statement will not be.
- You might also consider inserting dummy cases 0 and 5 to 8 in this example.
-
-\newline
+\layout Comment
+
+There might be reasons which SDCC cannot know about to either favour or
+ not favour jump tables.
+ If the target system has to be as quick for the last switch case as for
+ the first (pro jump table), or if the switch argument is known to be zero
+ in the majority of the cases (contra jump table).
+\layout Standard
+
The pragma nojtbound
\begin_inset LatexCommand \index{\#pragma nojtbound}
\emph default
aries.
It has no effect if a default label is supplied.
- Use of this pragma is dangerous: if the switch argument is not matched
- by a case statement the processor will happily jump into Nirvana.
+ Use of this pragma is dangerous: if the switch
+\begin_inset LatexCommand \index{switch statement}
+
+\end_inset
+
+ argument is not matched by a case statement the processor will happily
+ jump into Nirvana.
\layout Subsection
Bit-shifting Operations
copt
\emph default
a peep-hole optimizer by Christopher W.
- Fraser (cwfraser@microsoft.com).
+ Fraser (cwfraser\SpecialChar ~
+@\SpecialChar ~
+microsoft.com).
A default set of rules are compiled into the compiler, additional rules
may be added with the
\emph on
\emph default
).
E.g.
- some variants of the 8051 MCU allow only
+ some variants of the 8051 MCU
+\begin_inset LatexCommand \index{MCS51 variants}
+
+\end_inset
+
+ allow only
\family typewriter
ajmp
\family default
Deviations from the compliance:
\layout Itemize
-functions are not always reentrant
+functions are not reentrant
\begin_inset LatexCommand \index{reentrant}
\end_inset
-.
+ unless explicitly declared as such or the
+\series bold
+-
+\begin_inset ERT
+status Collapsed
+
+\layout Standard
+
+\backslash
+/
+\end_inset
+
+-stack-auto
+\begin_inset LatexCommand \index{-\/-stack-auto}
+
+\end_inset
+
+
+\series default
+ command line option is specified.
\layout Itemize
-structures cannot be assigned values directly, cannot be passed as function
- parameters or assigned to each other and cannot be a return value from
- a function, e.g.:
+structures and unions cannot be assigned values directly, cannot be passed
+ as function parameters or assigned to each other and cannot be a return
+ value from a function, e.g.:
\begin_deeper
\layout Verse
\end_deeper
\layout Itemize
-functions declared as pointers
-\begin_inset LatexCommand \index{Pointer (to function)}
+Certain words that are valid identifiers in the standard may be reserved
+ words in SDCC unless the
+\series bold
+-
+\begin_inset ERT
+status Collapsed
+
+\layout Standard
+
+\backslash
+/
+\end_inset
+
+-std-c89
+\begin_inset LatexCommand \index{-\/-std-c89}
\end_inset
+ or -
+\begin_inset ERT
+status Collapsed
-\begin_inset LatexCommand \index{function pointers}
+\layout Standard
+\backslash
+/
\end_inset
- must be dereferenced during the call.
-\begin_deeper
-\layout Verse
+-std-c99
+\begin_inset LatexCommand \index{-\/-std-c99}
+\end_inset
-\family typewriter
-int (*foo)();
-\newline
-...
-
-\newline
-/* has to be called like this */
-\newline
-(*foo)(); /* ANSI standard allows calls to be made like 'foo()' */
-\end_deeper
+
+\series default
+ command line options are used.
+ These may include (depending on the selected processor): 'at', 'banked',
+ 'bit', 'code', 'critical', 'data', 'eeprom', 'far', 'flash', 'idata', 'interrup
+t', 'near', 'nonbanked', 'pdata', 'reentrant', 'sbit', 'sfr', 'shadowregs',
+ 'sram', 'using', 'wparam', 'xdata', '_overlay', '_asm', '_endasm', and
+ '_naked'.
+ Compliant equivalents of these keywords are always available in a form
+ that begin with two underscores
+\begin_inset LatexCommand \index{\_\_ (prefix for extended keywords)}
+
+\end_inset
+
+, f.e.
+ '__data' instead of 'data'.
\layout Section
Cyclomatic Complexity
for which functions you might look at for further optimization.
\layout Section
-Notes on supported Processors
-\layout Subsection
-
-MCS51 variants
-\begin_inset LatexCommand \label{sub:MCS51-variants}
-
-\end_inset
-
-
-\begin_inset LatexCommand \index{MCS51 variants}
-
-\end_inset
-
-
-\layout Standard
-
-MCS51 processors are available from many vendors and come in many different
- flavours.
- While they might differ considerably in respect to Special Function Registers
- the core MCS51 is usually not modified or is kept compatible.
-
-\layout Subsubsection*
-
-pdata access by SFR
-\layout Standard
-
-With the upcome of devices with internal xdata and flash memory devices
- using port P2
-\begin_inset LatexCommand \index{P2 (mcs51 sfr)}
-
-\end_inset
-
- as dedicated I/O port is becoming more popular.
- Switching the high byte for pdata
-\begin_inset LatexCommand \index{pdata (mcs51, ds390 storage class)}
-
-\end_inset
-
- access which was formerly done by port P2 is then achieved by a Special
- Function Register
-\begin_inset LatexCommand \index{sfr}
-
-\end_inset
-
-.
- In well-established MCS51 tradition the address of this
-\emph on
-sfr
-\emph default
- is where the chip designers decided to put it.
- Needless to say that they didn't agree on a common name either.
- As pdata addressing is used in the startup code for the initialization
- of xdata variables a separate startup code should be used as described
- in section
-\begin_inset LatexCommand \ref{sub:Startup-Code}
-
-\end_inset
-
-.
-\layout Subsubsection*
-
-Other Features available by SFR
-\layout Standard
-
-Some MCS51 variants offer features like Double DPTR
-\begin_inset LatexCommand \index{DPTR}
-
-\end_inset
-
-, multiple DPTR, decrementing DPTR, 16x16 Multiply.
- These are currently not used for the MCS51 port.
- If you absolutely need them you can fall back to inline assembly or submit
- a patch to SDCC.
-\layout Subsection
-
-The Z80 and gbz80 port
-\layout Standard
-
-SDCC can target both the Zilog
-\begin_inset LatexCommand \index{Z80}
-
-\end_inset
-
- and the Nintendo Gameboy's Z80-like gbz80
-\begin_inset LatexCommand \index{gbz80 (GameBoy Z80)}
-
-\end_inset
-
-.
- The Z80 port is passed through the same
-\emph on
-regressions tests
-\begin_inset LatexCommand \index{Regression test}
-
-\end_inset
-
-
-\emph default
- as the MCS51 and DS390 ports, so floating point support, support for long
- variables and bitfield support is fine.
- See mailing lists and forums about interrupt routines.
-\layout Standard
-
-As always, the code is the authoritative reference - see z80/ralloc.c and
- z80/gen.c.
- The stack
-\begin_inset LatexCommand \index{stack}
-
-\end_inset
-
- frame is similar to that generated by the IAR Z80 compiler.
- IX is used as the base pointer, HL is used as a temporary register, and
- BC and DE are available for holding variables.
- IY is currently unused.
- Return values
-\begin_inset LatexCommand \index{return value}
-
-\end_inset
-
- are stored in HL.
- One bad side effect of using IX as the base pointer is that a functions
- stack frame is limited to 127 bytes - this will be fixed in a later version.
-\layout Subsection
-
-The HC08 port
-\layout Standard
-
-The port to the Motorola HC08
-\begin_inset LatexCommand \index{HC08}
-
-\end_inset
-
- family has been added in October 2003, thank you Erik!
-\layout Subsection
-
-The PIC16 port
-\layout Standard
-
-You'll find some additional notes about this port in the file src/pic16/NOTES.
-\layout Section
-
Retargetting for other Processors
\layout Standard
\shape italic
This is an excerpt from an article published in Circuit Cellar Magazine
- in august 2000.
+ in
+\series bold
+August 2000
+\series default
+.
It's a little outdated (the compiler is much more efficient now and user/develo
per friendly), but pretty well exposes the guts of it all.
\shape default
\series bold
\shape italic
\color red
-<Where is Figure II ?>
+<Where is Figure II?>
+\layout Comment
+
+In the original article Figure II was announced to be downloadable on
+\shape italic
+Circuit Cellar
+\shape default
+'s web site.
+ Unfortunately it never seemed to have shown up there, so: where is Figure
+ II?
\layout Paragraph*
ICode Example
projects / fw / sdcc / blobdiff