\lyxformat 221
\textclass book
\begin_preamble
+
\usepackage[
pdftitle={SDCC Compiler User Guide},
pdfauthor={SDCC development team},
\size normal
-SDCC 2.4.0
+SDCC 2.4.1
\size footnotesize
\newline
Web links to other SDCC related sites can also be found here.
This document can be found in the DOC directory of the source package as
a text or HTML file.
+ A pdf version of this document is available at
+\begin_inset LatexCommand \url{http://sdcc.sourceforge.net/doc/sdccman.pdf}
+
+\end_inset
+
+.
Some of the other tools (simulator and assembler) included with SDCC contain
their own documentation and can be found in the source distribution.
If you want the latest unreleased software, the complete source package
\newline
+\newline
+WARNING: Visual studio is very picky with line terminations; it expects
+ the 0x0d, 0x0a DOS style line endings, not the 0x0a Unix style line endings.
+ If you are getting a message such as "This makefile was not generated by
+ Developer Studio etc.
+ etc.
+\begin_inset Quotes srd
+\end_inset
+
+ when opening the sdcc.dsw workspace or any of the *.dsp projects, then you
+ need to convert the Unix style line endings to DOS style line endings.
+ To do so you can use the
+\begin_inset Quotes sld
+\end_inset
+
+unix2dos
+\begin_inset Quotes srd
+\end_inset
+
+ utility freely available on the internet.
+ Doug Hawkins reported in the sdcc-user list that this works:
+\newline
+
+\newline
+C:
+\backslash
+Programming
+\backslash
+SDCC> unix2dos sdcc.dsw
+\newline
+C:
+\backslash
+Programming
+\backslash
+SDCC> for /R %I in (*.dsp) do @unix2dos "%I"
+\newline
+
\newline
In order to build SDCC with MSVC you need win32 executables of bison.exe,
flex.exe, and gawk.exe.
\end_inset
as editor this is straightforward.
- If you want to avoid installing the tools you will have some success with
- a bootable Knoppix CD
-\begin_inset LatexCommand \url{http://www.knoppix.net}
-
-\end_inset
-
-.
Prebuilt documentation in html and pdf format is available from
\begin_inset LatexCommand \url{http://sdcc.sourceforge.net/snap.php}
currently matches SDCC for mcs51 and DS390 best and does give too few informati
on about f.e.
- Z80, PIC and HC08.
+ Z80, PIC14, PIC16 and HC08.
\layout Itemize
There are many references pointing away from this documentation.
- An intermediate file containing debug information needed to create the
.cdb file (with -
\begin_inset ERT
-status Collapsed
+status Open
\layout Standard
\layout Standard
+\family sans
\series bold
sdcc -c _divsint.c
\layout Standard
+\family sans
\series bold
sdcc -c _divuint.c
\layout Standard
+\family sans
\series bold
sdcc -c _modsint.c
\layout Standard
+\family sans
\series bold
sdcc -c _moduint.c
\layout Standard
+\family sans
\series bold
sdcc -c _mulint.c
\newline
\layout Standard
+\family sans
\series bold
sdcclib libint.lib _divsint.rel
+\family default
+
\begin_inset LatexCommand \index{sdcclib}
\end_inset
\layout Standard
+\family sans
\series bold
sdcclib libint.lib _divuint.rel
\layout Standard
+\family sans
\series bold
sdcclib libint.lib _modsint.rel
\layout Standard
+\family sans
\series bold
sdcclib libint.lib _moduint.rel
\layout Standard
+\family sans
\series bold
sdcclib libint.lib _mulint.rel
\series default
\newline
+\family sans
\series bold
sdcclib -s libint.lib
+\family default
+
\begin_inset LatexCommand \index{sdcclib}
\end_inset
\newline
+
+\family typewriter
+\series default
_divsint.rel:
\layout Standard
-\series bold
+\family typewriter
__divsint_a_1_1
\layout Standard
-\series bold
+\family typewriter
__divsint_PARM_2
\layout Standard
-\series bold
+\family typewriter
__divsint
\newline
_divuint.rel:
\layout Standard
-\series bold
+\family typewriter
__divuint_a_1_1
\layout Standard
-\series bold
+\family typewriter
__divuint_PARM_2
\layout Standard
-\series bold
+\family typewriter
__divuint_reste_1_1
\layout Standard
-\series bold
+\family typewriter
__divuint_count_1_1
\layout Standard
-\series bold
+\family typewriter
__divuint
\newline
_modsint.rel:
\layout Standard
-\series bold
+\family typewriter
__modsint_a_1_1
\layout Standard
-\series bold
+\family typewriter
__modsint_PARM_2
\layout Standard
-\series bold
+\family typewriter
__modsint
\newline
_moduint.rel:
\layout Standard
-\series bold
+\family typewriter
__moduint_a_1_1
\layout Standard
-\series bold
+\family typewriter
__moduint_PARM_2
\layout Standard
-\series bold
+\family typewriter
__moduint_count_1_1
\layout Standard
-\series bold
+\family typewriter
__moduint
\newline
_mulint.rel:
\layout Standard
-\series bold
+\family typewriter
__mulint_PARM_2
\layout Standard
-\series bold
+\family typewriter
__mulint
+\family default
+\series bold
+
\newline
\layout Standard
-If the source files are compiled using --debug, the corresponding debug
- information file .adb will be include in the library file as well.
+If the source files are compiled using -
+\begin_inset ERT
+status Open
+
+\layout Standard
+
+\backslash
+/
+\end_inset
+
+-debug
+\begin_inset LatexCommand \index{-\/-debug}
+
+\end_inset
+
+, the corresponding debug information file .adb will be include in the library
+ file as well.
The library files created with sdcclib are plain text files, so they can
be viewed with a text editor.
It is not recomended to modify a library file created with sdcclib using
AVR users should probably have a look at avr-gcc
\begin_inset LatexCommand \url{ http://savannah.nongnu.org/download/avr-libc/snapshots/}
+\end_inset
+
+ or winavr
+\begin_inset LatexCommand \url{http://winavr.sourceforge.net}
+
\end_inset
.
Causes the linker to check if the code memory usage is within limits of
the given value.
+\layout List
+\labelwidthstring 00.00.0000
+
+
+\series bold
+-
+\begin_inset ERT
+status Collapsed
+
+\layout Standard
+
+\backslash
+/
+\end_inset
+
+-stack-size
+\series default
+\SpecialChar ~
+<Value>
+\begin_inset LatexCommand \index{-\/-stack-size <Value>}
+
+\end_inset
+
+ Causes the linker to check if there is at minimum <Value> bytes for stack.
+\layout List
+\labelwidthstring 00.00.0000
+
+
+\series bold
+-
+\begin_inset ERT
+status Collapsed
+
+\layout Standard
+
+\backslash
+/
+\end_inset
+
+-pack-iram
+\series default
+\SpecialChar ~
+
+\begin_inset LatexCommand \index{-\/-pack-iram}
+
+\end_inset
+
+ Causes the linker use unused register banks for data variables or stack.
\layout Subsection
DS390 / DS400 Options
\layout Subsection
-PIC Options
-\begin_inset LatexCommand \index{Options PIC}
-
-\end_inset
-
-
-\begin_inset LatexCommand \index{PIC options}
-
-\end_inset
-
-
-\layout List
-\labelwidthstring 00.00.0000
-
-
-\series bold
--
-\begin_inset ERT
-status Collapsed
-
-\layout Standard
-
-\backslash
-/
-\end_inset
-
--gen-banksel
-\begin_inset LatexCommand \index{-\/-gen-banksel}
-
-\end_inset
-
-
-\series default
- enable the generation of banksel assembler directives in the PIC16
-\begin_inset LatexCommand \index{PIC16}
-
-\end_inset
-
- port.
-\layout Subsection
-
Z80 Options
\begin_inset LatexCommand \index{Options Z80}
\series default
Will not do loop invariant optimizations, this may be turned off for reasons
explained for the previous option.
- For more details of loop optimizations performed see section Loop Invariants.
+ For more details of loop optimizations performed see Loop Invariants in
+ section
+\begin_inset LatexCommand \ref{sub:Loop-Optimizations}
+
+\end_inset
+
+.
It is recommended that this option NOT be used, #pragma\SpecialChar ~
noinvariant
\begin_inset LatexCommand \index{\#pragma noinvariant}
\end_inset
.
- see section Parameters and Local Variables for more details.
+ See section
+\begin_inset LatexCommand \ref{sec:Parameters-and-Local-Variables}
+
+\end_inset
+
+ Parameters and Local Variables for more details.
If this option is used all source files in the project should be compiled
with this option.
\series bold
-
\begin_inset ERT
-status Collapsed
+status Open
\layout Standard
\series default
- This option can be used when the code generated is called by a monitor
- program.
- The compiler will generate a 'ret' upon return from the 'main'
+ This option can be used if the code generated is called by a monitor program
+ or if the main routine includes an endless loop.
+ This option might result in slightly smaller code and save two bytes of
+ stack space.
+ The return from the 'main'
\begin_inset LatexCommand \index{main return}
\end_inset
- function.
+ function will return to the function calling main.
The default setting is to lock up i.e.
generate a '
\family typewriter
\series default
Hides your ugly and inefficient c-code from the asm file, so you can always
- blame the compiler :).
+ blame the compiler :)
+\layout List
+\labelwidthstring 00.00.0000
+
+
+\series bold
+-
+\begin_inset ERT
+status Collapsed
+
+\layout Standard
+
+\backslash
+/
+\end_inset
+
+-no-peep-comments
+\begin_inset LatexCommand \index{-\/-no-peep-comments}
+
+\end_inset
+
+
+\series default
+ Will not include peep-hole comments in the generated files.
\layout List
\labelwidthstring 00.00.0000
The bit addressable memory consists of 128 bits which are located from 0x20
to 0x2f in data memory.
-\layout Standard
-
+\newline
Apart from this 8051 specific storage class most architectures support ANSI-C
bitfields
\begin_inset LatexCommand \index{bitfields}
\end_inset
-
+
\begin_inset Foot
collapsed false
\end_inset
.
+ In accordance with ISO/IEC 9899 bits and bitfields without an explicit
+ signed modifier are implemented as unsigned.
\layout Subsubsection
sfr
\family default
.
If you include the file z180.h this will be set automatically.
+\layout Subsection
+
+HC08 Storage Class
+\begin_inset LatexCommand \index{Storage class}
+
+\end_inset
+
+ Language Extensions
+\layout Subsubsection
+
+data
+\begin_inset LatexCommand \index{data (mcs51, ds390 storage class)}
+
+\end_inset
+
+
+\layout Standard
+
+The data storage class declares a variable that resides in the first 256
+ bytes of memory (the direct page).
+ The HC08 is most efficient at accessing variables (especially pointers)
+ stored here.
+\layout Subsubsection
+
+xdata
+\begin_inset LatexCommand \index{xdata (mcs51, ds390 storage class)}
+
+\end_inset
+
+
+\layout Standard
+
+The xdata storage class declares a variable that can reside anywhere in
+ memory.
+ This is the default if no storage class is specified.
+
\layout Section
Absolute Addressing
\emph on
volatile
\emph default
- should be used to tell the compiler that accesses might not be optimized
+ have to be used to tell the compiler that accesses might not be optimized
away:
\layout Verse
\end_inset
+\begin_inset LatexCommand \label{sec:Parameters-and-Local-Variables}
+
+\end_inset
+
+
\layout Standard
Automatic (local) variables and parameters to functions can either be placed
\end_inset
- either by using the
+ by using the
\emph on
-
\begin_inset ERT
\emph default
- option or by using the
+ option, by using
+\emph on
+#pragma\SpecialChar ~
+stackauto
+\emph default
+
+\begin_inset LatexCommand \index{\#pragma stackauto}
+
+\end_inset
+
+ or by using the
\emph on
reentrant
\begin_inset LatexCommand \index{reentrant}
\end_inset
+\layout Subsection
+
+General Information
\layout Standard
SDCC allows
\layout Standard
-Interrupt numbers and the corresponding address & descriptions for the Standard
- 8051/8052 are listed below.
- SDCC will automatically adjust the interrupt vector table to the maximum
+Interrupt service routines open the door for some very interesting bugs:
+\newline
+If an interrupt service routine changes variables which are accessed by
+ other functions these variables have to be declared
+\emph on
+volatile
+\emph default
+
+\begin_inset LatexCommand \index{volatile}
+
+\end_inset
+
+.
+
+\layout Standard
+
+If the access to these variables is not
+\emph on
+atomic
+\begin_inset LatexCommand \index{atomic access}
+
+\end_inset
+
+
+\emph default
+ (i.e.
+ the processor needs more than one instruction for the access and could
+ be interrupted while accessing the variable) the interrupt must be disabled
+ during the access to avoid inconsistent data.
+ Access to 16 or 32 bit variables is obviously not atomic on 8 bit CPUs
+ and should be protected by disabling interrupts.
+ You're not automatically on the safe side if you use 8 bit variables though.
+ We need an example here: f.e.
+ on the 8051 the harmless looking
+\begin_inset Quotes srd
+\end_inset
+
+
+\family typewriter
+flags\SpecialChar ~
+|=\SpecialChar ~
+0x80;
+\family default
+
+\begin_inset Quotes sld
+\end_inset
+
+ is not atomic if
+\family typewriter
+flags
+\family default
+ resides in xdata.
+ Setting
+\begin_inset Quotes srd
+\end_inset
+
+
+\family typewriter
+flags\SpecialChar ~
+|=\SpecialChar ~
+0x40;
+\family default
+
+\begin_inset Quotes sld
+\end_inset
+
+ from within an interrupt routine might get lost if the interrupt occurs
+ at the wrong time.
+
+\begin_inset Quotes sld
+\end_inset
+
+
+\family typewriter
+counter\SpecialChar ~
++=\SpecialChar ~
+8;
+\family default
+
+\begin_inset Quotes srd
+\end_inset
+
+ is not atomic on the 8051 even if
+\family typewriter
+counter
+\family default
+ is located in data memory.
+ Bugs like these are hard to reproduce and can cause a lot of trouble.
+
+\layout Standard
+
+The return address and the registers used in the interrupt service routine
+ are saved on the stack
+\begin_inset LatexCommand \index{stack}
+
+\end_inset
+
+ so there must be sufficient stack space.
+ If there isn't variables or registers (or even the return address itself)
+ will be corrupted.
+ This
+\emph on
+stack overflow
+\emph default
+
+\begin_inset LatexCommand \index{stack overflow}
+
+\end_inset
+
+ is most likely to happen if the interrupt occurs during the
+\begin_inset Quotes sld
+\end_inset
+
+deepest
+\begin_inset Quotes srd
+\end_inset
+
+ subroutine when the stack is already in use for f.e.
+ many return addresses.
+\layout Standard
+
+A special note here, int (16 bit) and long (32 bit) integer division
+\begin_inset LatexCommand \index{Division}
+
+\end_inset
+
+, multiplication
+\begin_inset LatexCommand \index{Multiplication}
+
+\end_inset
+
+ & modulus
+\begin_inset LatexCommand \index{Modulus}
+
+\end_inset
+
+ and floating-point
+\begin_inset LatexCommand \index{Floating point support}
+
+\end_inset
+
+ operations are implemented using external support routines developed in
+ ANSI-C.
+ If an interrupt service routine needs to do any of these operations then
+ the support routines (as mentioned in a following section) will have to
+ be recompiled using the
+\emph on
+ -
+\begin_inset ERT
+status Collapsed
+
+\layout Standard
+
+\backslash
+/
+\end_inset
+
+-stack-auto
+\begin_inset LatexCommand \index{-\/-stack-auto}
+
+\end_inset
+
+
+\emph default
+ option and the source file will need to be compiled using the
+\emph on
+-
+\begin_inset ERT
+status Collapsed
+
+\layout Standard
+
+\backslash
+/
+\end_inset
+
+-int-long-reent
+\emph default
+
+\begin_inset LatexCommand \index{-\/-int-long-reent}
+
+\end_inset
+
+ compiler option.
+\layout Standard
+
+Calling other functions from an interrupt service routine is not recommended,
+ avoid it if possible.
+ Note that when some function is called from an interrupt service routine
+ it should be preceded by a #pragma\SpecialChar ~
+nooverlay
+\begin_inset LatexCommand \index{\#pragma nooverlay}
+
+\end_inset
+
+ if it is not reentrant.
+ Furthermore nonreentrant functions should not be called from the main program
+ while the interrupt service routine might be active.
+
+\newline
+
+\newline
+Also see section
+\begin_inset LatexCommand \ref{sub:Overlaying}
+
+\end_inset
+
+\SpecialChar ~
+about Overlaying and section
+\begin_inset LatexCommand \ref{sub:Functions-using-private-banks}
+
+\end_inset
+
+\SpecialChar ~
+about Functions using private register banks.
+\layout Subsection
+
+MCS51/DS390 Interrupt Service Routines
+\layout Standard
+
+Interrupt numbers and the corresponding address & descriptions for the Standard
+ 8051/8052 are listed below.
+ SDCC will automatically adjust the interrupt vector table to the maximum
interrupt number specified.
\newline
\begin_inset Text
\layout Standard
-
-0x002B
-\end_inset
-</cell>
-</row>
-</lyxtabular>
-
-\end_inset
-
-
-\newline
-
-\layout Standard
-
-If the interrupt service routine is defined without
-\emph on
-using
-\begin_inset LatexCommand \index{using (mcs51, ds390 register bank)}
-
-\end_inset
-
-
-\emph default
- a register bank or with register bank 0 (
-\emph on
-using
-\emph default
- 0), the compiler will save the registers used by itself on the stack upon
- entry and restore them at exit, however if such an interrupt service routine
- calls another function then the entire register bank will be saved on the
- stack.
- This scheme may be advantageous for small interrupt service routines which
- have low register usage.
-\layout Standard
-
-If the interrupt service routine is defined to be using a specific register
- bank then only
-\emph on
-a, b, dptr
-\emph default
- & psw are saved and restored, if such an interrupt service routine calls
- another function (using another register bank) then the entire register
- bank of the called function will be saved on the stack.
- This scheme is recommended for larger interrupt service routines.
-\layout Standard
-
-Interrupt service routines open the door for some very interesting bugs:
-
-\layout Standard
-
-If the interrupt service routines changes variables which are accessed by
- other functions these variables should be declared
-\emph on
-volatile
-\emph default
-
-\begin_inset LatexCommand \index{volatile}
-
-\end_inset
-
-.
-
-\layout Standard
-
-If the access to these variables is not
-\emph on
-atomic
-\begin_inset LatexCommand \index{atomic access}
-
-\end_inset
-
-
-\emph default
- (i.e.
- the processor needs more than one instruction for the access and could
- be interrupted while accessing the variable) the interrupt must disabled
- during the access to avoid inconsistent data.
- Access to 16 or 32 bit variables is obviously not atomic on 8 bit CPUs
- and should be protected by disabling interrupts.
- You're not automatically on the safe side if you use 8 bit variables though.
- We need an example here: f.e.
- on the 8051 the harmless looking
-\begin_inset Quotes srd
-\end_inset
-
-
-\family typewriter
-flags\SpecialChar ~
-|=\SpecialChar ~
-0x80;
-\family default
-
-\begin_inset Quotes sld
-\end_inset
-
- is not atomic if
-\family typewriter
-flags
-\family default
- resides in xdata.
- Setting
-\begin_inset Quotes srd
-\end_inset
-
-
-\family typewriter
-flags\SpecialChar ~
-|=\SpecialChar ~
-0x40;
-\family default
-
-\begin_inset Quotes sld
-\end_inset
-
- from within an interrupt routine might get lost if the interrupt occurs
- at the wrong time.
-
-\begin_inset Quotes sld
-\end_inset
-
-
-\family typewriter
-counter\SpecialChar ~
-+=\SpecialChar ~
-8;
-\family default
-
-\begin_inset Quotes srd
-\end_inset
-
- is not atomic on the 8051 even if
-\family typewriter
-counter
-\family default
- is located in data memory.
- Bugs like these are hard to reproduce and can cause a lot of trouble.
-
-\layout Standard
-
-A special note here, int (16 bit) and long (32 bit) integer division
-\begin_inset LatexCommand \index{Division}
-
-\end_inset
-
-, multiplication
-\begin_inset LatexCommand \index{Multiplication}
-
-\end_inset
-
- & modulus
-\begin_inset LatexCommand \index{Modulus}
-
-\end_inset
-
- and floating-point
-\begin_inset LatexCommand \index{Floating point support}
-
-\end_inset
-
- operations are implemented using external support routines developed in
- ANSI-C.
- If an interrupt service routine needs to do any of these operations then
- the support routines (as mentioned in a following section) will have to
- be recompiled using the
-\emph on
- -
-\begin_inset ERT
-status Collapsed
-
-\layout Standard
-
-\backslash
-/
-\end_inset
-
--stack-auto
-\begin_inset LatexCommand \index{-\/-stack-auto}
-
-\end_inset
-
-
-\emph default
- option and the source file will need to be compiled using the
-\emph on
--
-\begin_inset ERT
-status Collapsed
-
-\layout Standard
-
-\backslash
-/
+
+0x002B
\end_inset
+</cell>
+</row>
+</lyxtabular>
--int-long-reent
-\emph default
+\end_inset
-\begin_inset LatexCommand \index{-\/-int-long-reent}
-\end_inset
+\newline
- compiler option.
\layout Standard
-Calling other functions from an interrupt service routine is not recommended,
- avoid it if possible.
- Note that when some function is called from an interrupt service routine
- it should be preceded by a #pragma\SpecialChar ~
-nooverlay
-\begin_inset LatexCommand \index{\#pragma nooverlay}
+If the interrupt service routine is defined without
+\emph on
+using
+\begin_inset LatexCommand \index{using (mcs51, ds390 register bank)}
\end_inset
- if it is not reentrant.
- Furthermore nonreentrant functions should not be called from the main program
- while the interrupt service routine might be active.
-
-\newline
-\newline
-Also see section
-\begin_inset LatexCommand \ref{sub:Overlaying}
+\emph default
+ a register bank or with register bank 0 (
+\emph on
+using
+\emph default
+ 0), the compiler will save the registers used by itself on the stack upon
+ entry and restore them at exit, however if such an interrupt service routine
+ calls another function then the entire register bank will be saved on the
+ stack.
+ This scheme may be advantageous for small interrupt service routines which
+ have low register usage.
+\layout Standard
-\end_inset
+If the interrupt service routine is defined to be using a specific register
+ bank then only
+\emph on
+a, b, dptr
+\emph default
+ & psw are saved and restored, if such an interrupt service routine calls
+ another function (using another register bank) then the entire register
+ bank of the called function will be saved on the stack.
+ This scheme is recommended for larger interrupt service routines.
+\layout Subsection
-\SpecialChar ~
-about Overlaying and section
-\begin_inset LatexCommand \ref{sub:Functions-using-private-banks}
+HC08 Interrupt Service Routines
+\layout Standard
+
+Since the number of interrupts available is chip specific and the interrupt
+ vector table always ends at the last byte of memory, the interrupt numbers
+ corresponds to the interrupt vectors in reverse order of address.
+ For example, interrupt 1 will use the interrupt vector at 0xfffc, interrupt
+ 2 will use the interrupt vector at 0xfffa, and so on.
+ However, interrupt 0 (the reset vector at 0xfffe) is not redefinable in
+ this way; instead see section
+\begin_inset LatexCommand \ref{sub:Startup-Code}
\end_inset
-\SpecialChar ~
-about Functions using private register banks.
+ for details on customizing startup.
\layout Section
Enabling and Disabling Interrupts
On some architectures which don't support interrupt priorities these can
be implemented by manipulating the interrupt mask and reenabling interrupts
within the interrupt routine.
- Don't add complexity unless you have to.
+ Check there is sufficient space on the stack
+\begin_inset LatexCommand \index{stack}
+
+\end_inset
+
+ and don't add complexity unless you have to.
\layout Section
initialization.
On some mcs51 variants xdata has to be explicitly enabled before it can
be accessed, this is the place to do it.
- See also the compiler option
+ The startup code clears the complete 256 byte of idata memory, this might
+ cause problems for 128 byte devices (endless loop reported for Chipcon
+ CC1010).
+\layout Standard
+
+See also the compiler option
\emph on
-
\begin_inset ERT
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
-buf[ head++ ] = c;
+buf[ head++ ] = c;\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+\SpecialChar ~
+/* access to a 256 byte aligned array */
\newline
}
\layout Standard
\layout Standard
+
+\series bold
+Attention
+\series default
+: this option wasn't maintained for a long time and is quite buggy.
+ Small programs might work.
+ You've been warned!
+\layout Standard
+
The external stack (-
\begin_inset ERT
status Collapsed
\end_inset
- this will save all current options to the save/restore stack.
- See restore.
+ See #pragma\SpecialChar ~
+restore.
\layout Itemize
restore
saves & restores can be nested.
SDCC uses a save/restore stack: save pushes current options to the stack,
restore pulls current options from the stack.
- See save.
+ See #pragma\SpecialChar ~
+save.
+\newline
+
\layout Itemize
-nogcse
-\begin_inset LatexCommand \index{\#pragma nogcse}
+callee_saves
+\begin_inset LatexCommand \index{\#pragma callee\_saves}
\end_inset
- - will stop global common subexpression elimination.
-\layout Itemize
-noinduction
-\begin_inset LatexCommand \index{\#pragma noinduction}
+\begin_inset LatexCommand \index{function prologue}
\end_inset
- - will stop loop induction optimizations.
-\layout Itemize
+ function1[,function2[,function3...]] - The compiler by default uses a caller
+ saves convention for register saving across function calls, however this
+ can cause unnecessary register pushing & popping
+\begin_inset LatexCommand \index{push/pop}
-nojtbound
-\begin_inset LatexCommand \index{\#pragma nojtbound}
+\end_inset
+
+ when calling small functions from larger functions.
+ This option can be used to switch off the register saving convention for
+ the function names specified.
+ The compiler will not save registers when calling these functions, extra
+ code need to be manually inserted at the entry & exit for these functions
+ to save & restore the registers used by these functions, this can SUBSTANTIALLY
+ reduce code & improve run time performance of the generated code.
+ In the future the compiler (with inter procedural analysis) may be able
+ to determine the appropriate scheme to use for each function call.
+ If -
+\begin_inset ERT
+status Collapsed
+\layout Standard
+
+\backslash
+/
\end_inset
- - will not generate code for boundary value checking, when switch statements
- are turned into jump-tables (dangerous).
- For more details see section
-\begin_inset LatexCommand \ref{sub:'switch'-Statements}
+-callee-saves command line option is used, the function names specified
+ in #pragma\SpecialChar ~
+callee_saves
+\begin_inset LatexCommand \index{\#pragma callee\_saves}
\end_inset
-.
+ is appended to the list of functions specified in the command line.
\layout Itemize
-nooverlay
-\begin_inset LatexCommand \index{\#pragma nooverlay}
+exclude
+\begin_inset LatexCommand \index{\#pragma exclude}
\end_inset
- - the compiler will not overlay the parameters and local variables of a
- function.
+ none | {acc[,b[,dpl[,dph]]] - The exclude pragma disables the generation
+ of pairs of push/pop
+\begin_inset LatexCommand \index{push/pop}
+
+\end_inset
+
+ instructions in
+\emph on
+I
+\emph default
+nterrupt
+\begin_inset LatexCommand \index{interrupt}
+
+\end_inset
+
+
+\emph on
+S
+\emph default
+ervice
+\emph on
+R
+\emph default
+outines.
+ The directive should be placed immediately before the ISR function definition
+ and it affects ALL ISR functions following it.
+ To enable the normal register saving for ISR functions use #pragma\SpecialChar ~
+exclude\SpecialChar ~
+none
+\begin_inset LatexCommand \index{\#pragma exclude}
+
+\end_inset
+
+.
+ See also the related keyword _naked
+\begin_inset LatexCommand \index{\_naked}
+
+\end_inset
+
+.
\layout Itemize
less_pedantic
your own now ;-(
\layout Itemize
-noloopreverse
-\begin_inset LatexCommand \index{\#pragma noloopreverse}
+nogcse
+\begin_inset LatexCommand \index{\#pragma nogcse}
\end_inset
- - Will not do loop reversal optimization
+ - will stop global common subexpression elimination.
\layout Itemize
-exclude
-\begin_inset LatexCommand \index{\#pragma exclude}
+noinduction
+\begin_inset LatexCommand \index{\#pragma noinduction}
\end_inset
- none | {acc[,b[,dpl[,dph]]] - The exclude pragma disables generation of
- pair of push/pop
-\begin_inset LatexCommand \index{push/pop}
-
-\end_inset
+ - will stop loop induction optimizations.
+\layout Itemize
- instruction in ISR function (using interrupt
-\begin_inset LatexCommand \index{interrupt}
+noinvariant
+\begin_inset LatexCommand \index{\#pragma noinvariant}
\end_inset
- keyword).
- The directive should be placed immediately before the ISR function definition
- and it affects ALL ISR functions following it.
- To enable the normal register saving for ISR functions use #pragma\SpecialChar ~
-exclude\SpecialChar ~
-none
-\begin_inset LatexCommand \index{\#pragma exclude}
+ - will not do loop invariant optimizations.
+ For more details see Loop Invariants in section
+\begin_inset LatexCommand \ref{sub:Loop-Optimizations}
\end_inset
about interrupts.
\layout Itemize
-callee_saves
-\begin_inset LatexCommand \index{\#pragma callee\_saves}
+nojtbound
+\begin_inset LatexCommand \index{\#pragma nojtbound}
+
+\end_inset
+
+ - will not generate code for boundary value checking, when switch statements
+ are turned into jump-tables (dangerous).
+ For more details see section
+\begin_inset LatexCommand \ref{sub:'switch'-Statements}
\end_inset
+.
+\layout Itemize
-\begin_inset LatexCommand \index{function prologue}
+noloopreverse
+\begin_inset LatexCommand \index{\#pragma noloopreverse}
\end_inset
- function1[,function2[,function3...]] - The compiler by default uses a caller
- saves convention for register saving across function calls, however this
- can cause unnecessary register pushing & popping
-\begin_inset LatexCommand \index{push/pop}
+ - Will not do loop reversal optimization
+\layout Itemize
+
+nooverlay
+\begin_inset LatexCommand \index{\#pragma nooverlay}
\end_inset
- when calling small functions from larger functions.
- This option can be used to switch off the register saving convention for
- the function names specified.
- The compiler will not save registers when calling these functions, extra
- code need to be manually inserted at the entry & exit for these functions
- to save & restore the registers used by these functions, this can SUBSTANTIALLY
- reduce code & improve run time performance of the generated code.
- In the future the compiler (with inter procedural analysis) may be able
- to determine the appropriate scheme to use for each function call.
- If -
+ - the compiler will not overlay the parameters and local variables of a
+ function.
+\layout Itemize
+
+stackauto
+\begin_inset LatexCommand \index{\#pragma stackauto}
+
+\end_inset
+
+- See option -
\begin_inset ERT
status Collapsed
/
\end_inset
--callee-saves command line option is used, the function names specified
- in #pragma\SpecialChar ~
-callee_saves
-\begin_inset LatexCommand \index{\#pragma callee\_saves}
+-stack-auto
+\begin_inset LatexCommand \index{-\/-stack-auto}
\end_inset
- is appended to the list of functions specified in the command line.
+ and section
+\begin_inset LatexCommand \ref{sec:Parameters-and-Local-Variables}
+
+\end_inset
+
+ Parameters and Local Variables.
\layout Standard
SDCPP supports the following #pragma directives:
\emph default
is where the chip designers decided to put it.
Needless to say that they didn't agree on a common name either.
- As pdata addressing is used in the startup code for the initialization
- of xdata variables a separate startup code should be used as described
- in section
+ So that the startup code can correctly initialize xdata variables, you
+ should define an sfr with the name _XPAGE
+\family typewriter
+
+\begin_inset LatexCommand \index{\_XPAGE (mcs51)}
+
+\end_inset
+
+
+\family default
+ at the appropriate location if the default, port P2, is not used for this.
+ Some examples are:
+\layout Verse
+
+
+\family typewriter
+sfr at 0x92 _XPAGE; /* Cypress EZ-USB family */
+\layout Verse
+
+
+\family typewriter
+sfr at 0xaf _XPAGE; /* some Silicon Labs (Cygnal) chips */
+\layout Verse
+
+
+\family typewriter
+sfr at 0xaa _XPAGE; /* some Silicon Labs (Cygnal) chips */
+\layout Standard
+
+For more exotic implementations further customizations may be needed.
+ See section
\begin_inset LatexCommand \ref{sub:Startup-Code}
\end_inset
-.
+ for other possibilities.
\layout Subsection
Other Features available by SFR
a patch to SDCC.
\layout Section
+DS400 port
+\layout Standard
+
+The DS80C400 microcontroller has a rich set of peripherals.
+ In its built-in ROM library it includes functions to access some of the
+ features, among them is a TCP stack with IP4 and IP6 support.
+ Library headers (currently in beta status) and other files are provided
+ at
+\size footnotesize
+
+\begin_inset LatexCommand \url{ftp://ftp.dalsemi.com/pub/tini/ds80c400/c_libraries/sdcc/index.html}
+
+\end_inset
+
+.
+
+\layout Section
+
The Z80 and gbz80 port
\layout Standard
\end_inset
frame is similar to that generated by the IAR Z80 compiler.
- IX is used as the base pointer, HL is used as a temporary register, and
- BC and DE are available for holding variables.
- IY is currently unused.
+ IX is used as the base pointer, HL and IY are used as a temporary registers,
+ and BC and DE are available for holding variables.
Return values
\begin_inset LatexCommand \index{return value}
\end_inset
- are stored in HL.
- One bad side effect of using IX as the base pointer is that a functions
- stack frame is limited to 127 bytes - this will be fixed in a later version.
+ for the Z80 port are stored in L (one byte), HL (two bytes), or DEHL (four
+ bytes).
+ The gbz80 port use the same set of registers for the return values, but
+ in a different order of significance: E (one byte), DE (two bytes), or
+ HLDE (four bytes).
\layout Section
The HC08 port
\end_inset
- family has been added in October 2003, thank you Erik!
+ family has been added in October 2003, and is still undergoing some basic
+ development.
+ The code generator is complete, but the register allocation is still quite
+ unoptimized.
+ Some of the SDCC's standard C library functions have embedded non-HC08
+ inline assembly and so are not yet usable.
+\newline
+
+\newline
+
\layout Section
The PIC14 port
T0IF = 0; /* Clear timer interrupt */
\newline
}
-\layout Standard
+\layout Subsection
Linking and assembling
-\newline
+\layout Standard
+
For assembling you can use either GPUTILS'
\begin_inset LatexCommand \index{gputils (pic tools)}
\end_inset
gpasm.exe or MPLAB's mpasmwin.exe.
+ GPUTILS is available from
+\begin_inset LatexCommand \url{http://gputils.sourceforge.net/}
+
+\end_inset
+
+.
For linking you can use either GPUTIL's gplink or MPLAB's mplink.exe.
If you use MPLAB and an interrupt function then the linker script file
vectors section will need to be enlarged to link with mplink.
\SpecialChar ~
\SpecialChar ~
mplink /v $(PRJ).lkr /m $(PRJ).map /o $(PRJ).hex $(OBJS)
+\layout Standard
+
+Please note that indentations within a
+\family typewriter
+ Makefile
+\family default
+ have to be done with a tabulator character.
\layout Section
The PIC16
\end_inset
- port (refered from now on as pic16) is the portion of SDCC that is responsible
- to produce code for the Microchip
+ port is the portion of SDCC that is responsible to produce code for the
+ Microchip
\begin_inset LatexCommand \index{Microchip}
\end_inset
Global Options
\layout Standard
-The pic16 port supports the standard command line arguments as supposed,
- with the exception of certain cases that will be mentioned in the following
+PIC16 port supports the standard command line arguments as supposed, with
+ the exception of certain cases that will be mentioned in the following
list:
\layout List
\labelwidthstring 00.00.0000
no local variables.
\layout Subsection
-PIC16 Port Specific Options
+Port Specific Options
+\begin_inset LatexCommand \index{Options PIC16}
+
+\end_inset
+
+
\layout Standard
The port specific options appear after the global options in the sdcc --help
/
\end_inset
--penable-stack Enables stack usage.
- All new development is done with stack enabled.
- This command line soon will be deprecated and stack will be enabled by
- default.
- For the time being it must be entered if one wants to have stack.
-\layout List
-\labelwidthstring 00.00.0000
-
--
-\begin_inset ERT
-status Collapsed
-
-\layout Standard
-
-\backslash
-/
-\end_inset
-
-stack-model=[model] Used in conjuction with the command above.
Defines the stack model to be used, valid stack models are :
\begin_deeper
/
\end_inset
--debug-xtra Similar to --debug, but dumps more information.
+-debug-xtra Similar to -
+\begin_inset ERT
+status Collapsed
+
+\layout Standard
+
+\backslash
+/
+\end_inset
+
+-debug
+\begin_inset LatexCommand \index{-\/-debug}
+
+\end_inset
+
+, but dumps more information.
\layout List
\labelwidthstring 00.00.0000
Directories
\layout Standard
-PIC16 port uses the following directories for searching header files and
- libraries.
+PIC16
+\begin_inset LatexCommand \index{PIC16}
+
+\end_inset
+
+ port uses the following directories for searching header files and libraries.
\layout Standard
\align center
<features>
<column alignment="center" valignment="top" leftline="true" width="0">
<column alignment="center" valignment="top" leftline="true" rightline="true" width="0">
-<column alignment="center" valignment="top" leftline="true" rightline="true" width="0">
+<column alignment="center" valignment="top" width="0">
<column alignment="center" valignment="top" leftline="true" rightline="true" width="0">
<row topline="true" bottomline="true">
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\layout Standard
-Command prefix
+Command prefix
+\end_inset
+</cell>
+</row>
+<row topline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+PREFIX/sdcc/include/pic16
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+PIC16 specific headers
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+Compiler
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+-I
+\end_inset
+</cell>
+</row>
+<row topline="true" bottomline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+PREFIX/sdcc/lib/pic16
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+PIC16 specific libraries
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+Linker
+\end_inset
+</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+-L
+\end_inset
+</cell>
+</row>
+</lyxtabular>
+
+\end_inset
+
+
+\layout Subsection
+
+Pragmas
+\begin_inset LatexCommand \label{sub:PIC16_Pragmas}
+
+\end_inset
+
+
+\layout Standard
+
+PIC16 port currently supports the following pragmas:
+\layout List
+\labelwidthstring 00.00.0000
+
+stack pragma stack forces the code generator to initialize the stack & frame
+ pointers at a specific address.
+ This is an adhoc solution since gplink does not support yet stack.
+ When the gplink issue is resolved the pragma will be deprecated
+\begin_inset Foot
+collapsed true
+
+\layout Standard
+
+
+\emph on
+It is important to initialize the stack, otherwise strange things can happen.
+ Stack is not initialized by default because there are some sources that
+ do not require it.
+ (like library sources)
+\end_inset
+
+.
+\newline
+The stack pragma should be used only once in a project.
+ Multiple pragmas may result in indeterminate behaviour of the program.
+\newline
+If you omit setting the pragma the port emits a warning message before linking.
+ If not initializing the stack is desired ignore the message.
+\layout LyX-Code
+
+Example:
+\layout LyX-Code
+
+\layout LyX-Code
+
+/* initializes stack at RAM address 0x5ff */
+\layout LyX-Code
+
+#pragma stack 0x5ff
+\layout LyX-Code
+
+\layout Subsection
+
+Header Files
+\begin_inset LatexCommand \label{sub:PIC16_Header-Files}
+
+\end_inset
+
+
+\layout Standard
+
+There is one main header file that can be included to the source files using
+ the pic16 port.
+ That file is the
+\series bold
+pic18fregs.h
+\series default
+.
+ This header file contains the definitions for the processor special registers,
+ so it is necessary if the source accesses them.
+ It can be included by adding the following line in the beginning of the
+ file:
+\layout LyX-Code
+
+#include <pic18fregs.h>
+\layout Standard
+
+The specific microcontroller is selected within the pic18fregs.h automatically,
+ so the same source can be used with a variety of devices.
+\layout Subsection
+
+Libraries
+\layout Standard
+
+The libraries that PIC16
+\begin_inset LatexCommand \index{PIC16}
+
+\end_inset
+
+ port depends on are the microcontroller device libraries which contain
+ the symbol definitions for the microcontroller special function registers.
+ These libraries have the format pic18fxxxx.lib, where
+\emph on
+xxxx
+\emph default
+ is the microcontroller identification number.
+ The specific library is selected automatically by the compiler at link
+ stage according to the selected device.
+\layout Standard
+
+Libraries are created with gplib which is part of the gputils package
+\begin_inset LatexCommand \url{http://gputils.sourceforge.net}
+
+\end_inset
+
+.
+\layout Subsection
+
+Memory Models
+\layout Standard
+
+The following memory models are supported by the PIC16 port:
+\layout Itemize
+
+small model
+\layout Itemize
+
+large model
+\layout Standard
+
+Memory model affects the default size of pointers within the source.
+ The sizes are shown in the next table:
+\layout Standard
+\align center
+
+\begin_inset Tabular
+<lyxtabular version="3" rows="3" columns="3">
+<features>
+<column alignment="center" valignment="top" leftline="true" rightline="true" width="0">
+<column alignment="center" valignment="top" leftline="true" width="0">
+<column alignment="center" valignment="top" leftline="true" rightline="true" width="0">
+<row topline="true" bottomline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+Pointer sizes according to memory model
\end_inset
</cell>
-</row>
-<row topline="true" bottomline="true">
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
\layout Standard
-PREFIX/sdcc/include/pic16
+small model
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\layout Standard
-PIC16 specific headers
+large model
\end_inset
</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+</row>
+<row topline="true" bottomline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
\layout Standard
-Compiler
+code pointers
\end_inset
</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+<cell multicolumn="1" alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
\layout Standard
--I
+16-bits
\end_inset
</cell>
-</row>
-<row topline="true" bottomline="true">
-<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
\layout Standard
-PREFIX/sdcc/lib/pic16
+24-bits
\end_inset
</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+</row>
+<row topline="true" bottomline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
\layout Standard
-PIC16 specific libraries
+data pointers
\end_inset
</cell>
-<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+<cell multicolumn="1" alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
\begin_inset Text
\layout Standard
-Linker
+16-bits
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\layout Standard
--L
+16-bits
\end_inset
</cell>
</row>
\end_inset
-\layout Subsection
-
-Header Files
\layout Standard
-There is one main header file that can be included to the source files using
- the pic16 port.
- That file is the
+It is advisable that all sources within a project are compiled with the
+ same memory model.
+ If one wants to override the default memory model, this can be done by
+ declaring a pointer as
\series bold
-pic18fregs.h
+far
+\series default
+ or
+\series bold
+near
\series default
.
- This header file contains the definitions for the processor special registers,
- so it is necessery if the soruce accesses them.
- It can be included by adding the following line in the beginning of the
- file:
-\layout LyX-Code
-
-#include <pic18fregs.h>
-\layout Standard
-
-The specific microcontroller is selected within the pic18fregs.h automatically,
- so the same source can be used with a variety of devices.
-\layout Subsection
-
-Libraries
-\layout Standard
-
-The libraries that pic16 port depends on are the microcontroller device
- libraries which contain the symbol definitions for the microcontroller
- special function registers.
- These libraries have the format pic18fxxxx.lib, where
-\emph on
-xxxx
-\emph default
- is the microcontroller identification number.
- The specific library is selected automatically by the compiler at link
- stage according to the selected device.
+ Far selects large memory model's pointers, while near selects small memory
+ model's pointers.
\layout Standard
-Libraries are created with gplib which is part of the gputils package
-\begin_inset LatexCommand \url{http://gputils.sourceforge.net}
+The standard device libraries (see
+\begin_inset LatexCommand \ref{sub:PIC16_Header-Files}
\end_inset
-.
-\layout Subsection
-
-Memory Models
-\layout Standard
-
-The following memory models are supported by PIC16 port:
-\layout Itemize
-
-small model
-\layout Itemize
-
-large model
+) contain no reference to pointers, so they can be used with both memory
+ models.
\layout Subsection
Stack
FSR2 is assigned as frame pointer
\layout Standard
-The following stack models are supported by PIC16 port
+The following stack models are supported by the PIC16 port
\layout Itemize
small model
\end_inset
+\layout Standard
+
+
+\series bold
+Currently stack and frame pointers should be initialized explicit by the
+ user at the desired Data RAM position (see
+\begin_inset LatexCommand \ref{sub:PIC16_Pragmas}
+
+\end_inset
+
+ Pragma stack).
+ Uninitialized stack and frame pointers can result in unexpected behavior
+ of the resulting binary.
\layout Subsection
-Pointers
+Function return values
+\layout Standard
+
+Return values from functions are placed to the appropriate registers following
+ a modified Microchip policy optimized for SDCC.
+ The following table shows these registers:
\layout Standard
\align center
\begin_inset Tabular
-<lyxtabular version="3" rows="3" columns="3">
+<lyxtabular version="3" rows="6" columns="2">
<features>
-<column alignment="center" valignment="top" leftline="true" rightline="true" width="0">
<column alignment="center" valignment="top" leftline="true" width="0">
<column alignment="center" valignment="top" leftline="true" rightline="true" width="0">
<row topline="true" bottomline="true">
\layout Standard
-Pointer sizes according to memory model
+size
\end_inset
</cell>
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+destination register
+\end_inset
+</cell>
+</row>
+<row topline="true">
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
\layout Standard
-small model
+8 bits
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\layout Standard
-large model
+WREG
\end_inset
</cell>
</row>
-<row topline="true" bottomline="true">
+<row topline="true">
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
\layout Standard
-code pointers
+16 bits
\end_inset
</cell>
-<cell multicolumn="1" alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
\layout Standard
-16-bits
+PRODL:WREG
+\end_inset
+</cell>
+</row>
+<row topline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+24 bits
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\layout Standard
-24-bits
+PRODH:PRODL:WREG
\end_inset
</cell>
</row>
-<row topline="true" bottomline="true">
+<row topline="true">
<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
\begin_inset Text
\layout Standard
-data pointers
+32 bits
\end_inset
</cell>
-<cell multicolumn="1" alignment="center" valignment="top" topline="true" bottomline="true" leftline="true" usebox="none">
+<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\begin_inset Text
\layout Standard
-16-bits
+FSR0L:PRODH:PRODL:WREG
+\end_inset
+</cell>
+</row>
+<row topline="true" bottomline="true">
+<cell alignment="center" valignment="top" topline="true" leftline="true" usebox="none">
+\begin_inset Text
+
+\layout Standard
+
+>32 bits
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
\layout Standard
-24-bits
+on stack, FSR0 points to the beginning
\end_inset
</cell>
</row>
\end_inset
+\layout Subsection
+
+Interrupts
+\layout Standard
+
+When entering an interrupt, currently the PIC16
+\begin_inset LatexCommand \index{PIC16}
+
+\end_inset
+
+ port automatically saves the following registers:
+\layout Itemize
+
+WREG
+\layout Itemize
+
+STATUS
+\layout Itemize
+
+BSR
+\layout Itemize
+
+PROD (PRODL and PRODH)
+\layout Itemize
+
+FSR0 (FSR0L and FSR0H)
+\layout Standard
+
+These registers are restored upon return from the interrupt routine
+\begin_inset Foot
+collapsed false
+
+\layout Standard
+
+NOTE that when the _naked attribute is specified for an interrupt routine,
+ then NO registers are stored or restored.
+\end_inset
+
+.
\layout Chapter
Debugging with SDCDB
Compiling for Debugging
\layout Standard
-The \SpecialChar \-
-\SpecialChar \-
-debug option must be specified for all files for which debug information
- is to be generated.
+The -
+\begin_inset ERT
+status Collapsed
+
+\layout Standard
+
+\backslash
+/
+\end_inset
+
+-debug
+\begin_inset LatexCommand \index{-\/-debug}
+
+\end_inset
+
+ option must be specified for all files for which debug information is to
+ be generated.
The complier generates a .adb file for each of these files.
The linker creates the .cdb
\begin_inset LatexCommand \index{<file>.cdb}
\family typewriter
\newline
-;; Current Listing ::
+;;\SpecialChar ~
+Current Listing ::
\newline
;;key\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
-\SpecialChar ~
binding\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
+-------\SpecialChar ~
\SpecialChar ~
-------\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
-\SpecialChar ~
---------
+-------
\newline
;;
\newline
-;; n\SpecialChar ~
+;;\SpecialChar ~
+n\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
- sdcdb-next-from-src\SpecialChar ~
+\SpecialChar ~
+sdcdb-next-from-src\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
SDCDB next command
\newline
-;; b\SpecialChar ~
+;;\SpecialChar ~
+b\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
- sdcdb-back-from-src\SpecialChar ~
+\SpecialChar ~
+sdcdb-back-from-src\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
SDCDB back command
\newline
-;; c\SpecialChar ~
+;;\SpecialChar ~
+c\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
- sdcdb-cont-from-src\SpecialChar ~
+\SpecialChar ~
+sdcdb-cont-from-src\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
SDCDB continue command
\newline
-;; s\SpecialChar ~
+;;\SpecialChar ~
+s\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
- sdcdb-step-from-src\SpecialChar ~
+\SpecialChar ~
+sdcdb-step-from-src\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
SDCDB step command
\newline
-;; ?\SpecialChar ~
+;;\SpecialChar ~
+?\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
- sdcdb-whatis-c-sexp\SpecialChar ~
+\SpecialChar ~
+sdcdb-whatis-c-sexp\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
- buffer point
+\SpecialChar ~
+buffer point
\newline
-;; x\SpecialChar ~
+;;\SpecialChar ~
+x\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
- sdcdbsrc-delete\SpecialChar ~
+\SpecialChar ~
+sdcdbsrc-delete\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
+\SpecialChar ~
given or delete arg (C-u arg x)
\newline
-;; m\SpecialChar ~
+;;\SpecialChar ~
+m\SpecialChar ~
+\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
- sdcdbsrc-frame\SpecialChar ~
+sdcdbsrc-frame\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
buffer point
\newline
-;; !\SpecialChar ~
+;;\SpecialChar ~
+!\SpecialChar ~
+\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
- sdcdbsrc-goto-sdcdb\SpecialChar ~
+sdcdbsrc-goto-sdcdb\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
Goto the SDCDB output buffer
\newline
-;; p\SpecialChar ~
+;;\SpecialChar ~
+p\SpecialChar ~
+\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
- sdcdb-print-c-sexp\SpecialChar ~
+sdcdb-print-c-sexp\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
- buffer point
+\SpecialChar ~
+buffer point
\newline
-;; g\SpecialChar ~
+;;\SpecialChar ~
+g\SpecialChar ~
+\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
- sdcdbsrc-goto-sdcdb\SpecialChar ~
+sdcdbsrc-goto-sdcdb\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
Goto the SDCDB output buffer
\newline
-;; t\SpecialChar ~
+;;\SpecialChar ~
+t\SpecialChar ~
+\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
- sdcdbsrc-mode\SpecialChar ~
+sdcdbsrc-mode\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\newline
;;
\newline
-;; C-c C-f\SpecialChar ~
+;;\SpecialChar ~
+C-c\SpecialChar ~
+C-f\SpecialChar ~
+\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
- sdcdb-finish-from-src\SpecialChar ~
+sdcdb-finish-from-src\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\newline
;;
\newline
-;; C-x SPC\SpecialChar ~
+;;\SpecialChar ~
+C-x\SpecialChar ~
+SPC\SpecialChar ~
+\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
- sdcdb-break\SpecialChar ~
+sdcdb-break\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
Set break for line with point
\newline
-;; ESC t\SpecialChar ~
+;;\SpecialChar ~
+ESC\SpecialChar ~
+t\SpecialChar ~
+\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
- sdcdbsrc-mode\SpecialChar ~
+sdcdbsrc-mode\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
Toggle Sdcdbsrc mode
\newline
-;; ESC m\SpecialChar ~
+;;\SpecialChar ~
+ESC\SpecialChar ~
+m\SpecialChar ~
+\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
- sdcdbsrc-srcmode\SpecialChar ~
+sdcdbsrc-srcmode\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
\SpecialChar ~
- Toggle list mode
+\SpecialChar ~
+Toggle list mode
\newline
;;
\newline
promoted to 'signed int' before doing any operation.
This promotion can be omitted, if the result is the same.
The effect of the promotion rules together with the sign-extension is often
- supprising:
+ surprising:
\begin_deeper
\layout Verse
\layout Standard
-Statically checks c sources
+Statically checks c sources (has anyone adapted splint for SDCC?)
\end_inset
</cell>
<cell alignment="center" valignment="top" topline="true" leftline="true" rightline="true" usebox="none">
.
You'll find the complete set of mailing lists
-\begin_inset LatexCommand \index{Mailing list}
+\begin_inset LatexCommand \index{Mailing list(s)}
\end_inset
\end_inset
-, lists and forums are archived and searchable so if you are lucky someone
- already had a similar problem.
+, lists
+\begin_inset LatexCommand \index{Mailing list(s)}
+
+\end_inset
+
+ and forums are archived and searchable so if you are lucky someone already
+ had a similar problem.
+ While mails to the lists themselves are delivered promptly their web front
+ end on sourceforge sometimes shows a severe time lag (up to several weeks),
+ if you're seriously using SDCC please consider subscribing to the lists.
\layout Section
ChangeLog
\end_inset
+\begin_inset LatexCommand \label{sub:Loop-Optimizations}
+
+\end_inset
+
+
\layout Standard
-Two types of loop optimizations are done by SDCC loop invariant lifting
- and strength reduction of loop induction variables.
+Two types of loop optimizations are done by SDCC
+\emph on
+loop invariant
+\emph default
+ lifting and
+\emph on
+ strength reduction
+\emph default
+ of loop induction variables.
In addition to the strength reduction the optimizer marks the induction
variables and the register allocator tries to keep the induction variables
in registers for the duration of the loop.
\emph default
).
E.g.
- some variants of the 8051 MCU allow only
+ some variants of the 8051 MCU
+\begin_inset LatexCommand \index{MCS51 variants}
+
+\end_inset
+
+ allow only
\family typewriter
ajmp
\family default
\newline
}
\end_deeper
-\layout Itemize
-
-functions declared as pointers
-\begin_inset LatexCommand \index{Pointer (to function)}
-
-\end_inset
-
-
-\begin_inset LatexCommand \index{function pointers}
-
-\end_inset
-
- must be dereferenced during the call.
-\begin_deeper
-\layout Verse
-
-
-\family typewriter
-int (*foo)();
-\newline
-...
-
-\newline
-/* has to be called like this */
-\newline
-(*foo)(); /* ANSI standard allows calls to be made like 'foo()' */
-\end_deeper
\layout Section
Cyclomatic Complexity
projects / fw / sdcc / blobdiff