@section Stand alone Systems
-@b{ZY1000} See: @url{http://www.zylin.com/zy1000.html} Technically, not a
+@b{ZY1000} See: @url{http://www.ultsol.com/index.php/component/content/article/8/33-zylin-zy1000-jtag-probe} Technically, not a
dongle, but a standalone box. The ZY1000 has the advantage that it does
not require any drivers installed on the developer PC. It also has
a built in web interface. It supports RTCK/RCLK or adaptive clocking
@* Link @url{http://www.hitex.com/index.php?id=cortino}
@item @b{dlp-usb1232h}
@* Link @url{http://www.dlpdesign.com/usb/usb1232h.shtml}
+@item @b{digilent-hs1}
+@* Link @url{http://www.digilentinc.com/Products/Detail.cfm?Prod=JTAG-HS1}
@end itemize
@section USB-JTAG / Altera USB-Blaster compatibles
option. When vendors put out multiple versions of a chip, or use the same
JTAG-level ID for several largely-compatible chips, it may be more practical
to ignore the version field than to update config files to handle all of
-the various chip IDs.
+the various chip IDs. The version field is defined as bit 28-31 of the IDCODE.
@item @code{-ircapture} @var{NUMBER}
@*The bit pattern loaded by the TAP into the JTAG shift register
on entry to the @sc{ircapture} state, such as 0x01.
@comment - defines mass_erase ... pointless given flash_erase_address
@end deffn
-@deffn {Flash Driver} ecosflash
-@emph{No idea what this is...}
-The @var{ecosflash} driver defines one mandatory parameter,
-the name of a modules of target code which is downloaded
-and executed.
-@end deffn
-
@deffn {Flash Driver} lpc2000
Most members of the LPC1700 and LPC2000 microcontroller families from NXP
include internal flash and use Cortex-M3 (LPC1700) or ARM7TDMI (LPC2000) cores.
flash bank $_FLASHNAME stm32f1x 0 0 0 0 $_TARGETNAME
@end example
+If you have a target with dual flash banks then define the second bank
+as per the following example.
+@example
+flash bank $_FLASHNAME stm32f1x 0x08080000 0 0 0 $_TARGETNAME
+@end example
+
Some stm32f1x-specific commands
@footnote{Currently there is a @command{stm32f1x mass_erase} command.
That seems pointless since the same effect can be had using the