--pipe | -p use pipes when talking to gdb
@end verbatim
-By default OpenOCD reads the file configuration file @file{openocd.cfg}
-in the current directory. To specify a different (or multiple)
-configuration file, you can use the ``-f'' option. For example:
+By default OpenOCD reads the configuration file @file{openocd.cfg}.
+To specify a different (or multiple)
+configuration file, you can use the @option{-f} option. For example:
@example
openocd -f config1.cfg -f config2.cfg -f config3.cfg
@end example
+Configuration files and scripts are searched for in
+@enumerate
+@item the current directory,
+@item any search dir specified on the command line using the @option{-s} option,
+@item @file{$HOME/.openocd} (not on Windows),
+@item the site wide script library @file{$pkgdatadir/site} and
+@item the OpenOCD-supplied script library @file{$pkgdatadir/scripts}.
+@end enumerate
+The first found file with a matching file name will be used.
+
OpenOCD starts by processing the configuration commands provided
on the command line or in @file{openocd.cfg}.
@xref{Configuration Stage}.
those channels.
If you are having problems, you can enable internal debug messages via
-the ``-d'' option.
+the @option{-d} option.
Also it is possible to interleave JIM-Tcl commands w/config scripts using the
@option{-c} command line switch.
You can redirect all output from the daemon to a file using the
@option{-l <logfile>} switch.
-Search paths for config/script files can be added to OpenOCD by using
-the @option{-s <search>} switch. The current directory and the OpenOCD
-target library is in the search path by default.
-
For details on the @option{-p} option. @xref{Connecting to GDB}.
Note! OpenOCD will launch the GDB & telnet server even if it can not
@deffn Command reg [(number|name) [value]]
Access a single register by @var{number} or by its @var{name}.
+The target must generally be halted before access to CPU core
+registers is allowed. Depending on the hardware, some other
+registers may be accessible while the target is running.
@emph{With no arguments}:
list all available registers for the current target,
showing number, name, size, value, and cache status.
+For valid entries, a value is shown; valid entries
+which are also dirty (and will be written back later)
+are flagged as such.
@emph{With number/name}: display that register's value.
@emph{With both number/name and value}: set register's value.
+Writes may be held in a writeback cache internal to OpenOCD,
+so that setting the value marks the register as dirty instead
+of immediately flushing that value. Resuming CPU execution
+(including by single stepping) or otherwise activating the
+relevant module will flush such values.
Cores may have surprisingly many registers in their
Debug and trace infrastructure:
@example
> reg
-(0) r0 (/32): 0x0000D3C2 (dirty: 1, valid: 1)
-(1) r1 (/32): 0xFD61F31C (dirty: 0, valid: 1)
-(2) r2 (/32): 0x00022551 (dirty: 0, valid: 1)
+===== ARM registers
+(0) r0 (/32): 0x0000D3C2 (dirty)
+(1) r1 (/32): 0xFD61F31C
+(2) r2 (/32)
...
-(164) ETM_CONTEXTID_COMPARATOR_MASK (/32): \
- 0x00000000 (dirty: 0, valid: 0)
+(164) ETM_contextid_comparator_mask (/32)
>
@end example
@end deffn
@deffn Command {arm reg}
Display a table of all banked core registers, fetching the current value from every
-core mode if necessary. OpenOCD versions before rev. 60 didn't fetch the current
-register value.
+core mode if necessary.
@end deffn
+@section ARMv4 and ARMv5 Architecture
+@cindex ARMv4
+@cindex ARMv5
+
+The ARMv4 and ARMv5 architectures are widely used in embedded systems,
+and introduced core parts of the instruction set in use today.
+That includes the Thumb instruction set, introduced in the ARMv4T
+variant.
+
@subsection ARM7 and ARM9 specific commands
@cindex ARM7
@cindex ARM9
These commands are specific to ARM7 and ARM9 cores, like ARM7TDMI, ARM720T,
ARM9TDMI, ARM920T or ARM926EJ-S.
-They are available in addition to the ARMv4/5 commands,
+They are available in addition to the ARM commands,
and any other core-specific commands that may be available.
@deffn Command {arm7_9 dbgrq} (@option{enable}|@option{disable})
speeds, like the 32kHz startup clock of an AT91RM9200.
@end deffn
-@deffn {Debug Command} {arm7_9 write_core_reg} num mode word
-@emph{This is intended for use while debugging OpenOCD; you probably
-shouldn't use it.}
-
-Writes a 32-bit @var{word} to register @var{num} (from 0 to 16)
-as used in the specified @var{mode}
-(where e.g. mode 16 is "user" and mode 19 is "supervisor";
-the M4..M0 bits of the PSR).
-Registers 0..15 are the normal CPU registers such as r0(0), r1(1) ... pc(15).
-Register 16 is the mode-specific SPSR,
-unless the specified mode is 0xffffffff (32-bit all-ones)
-in which case register 16 is the CPSR.
-The write goes directly to the CPU, bypassing the register cache.
-@end deffn
-
-@deffn {Debug Command} {arm7_9 write_xpsr} word (@option{0}|@option{1})
-@emph{This is intended for use while debugging OpenOCD; you probably
-shouldn't use it.}
-
-If the second parameter is zero, writes @var{word} to the
-Current Program Status register (CPSR).
-Else writes @var{word} to the current mode's Saved PSR (SPSR).
-In both cases, this bypasses the register cache.
-@end deffn
-
-@deffn {Debug Command} {arm7_9 write_xpsr_im8} byte rotate (@option{0}|@option{1})
-@emph{This is intended for use while debugging OpenOCD; you probably
-shouldn't use it.}
-
-Writes eight bits to the CPSR or SPSR,
-first rotating them by @math{2*rotate} bits,
-and bypassing the register cache.
-This has lower JTAG overhead than writing the entire CPSR or SPSR
-with @command{arm7_9 write_xpsr}.
-@end deffn
-
@subsection ARM720T specific commands
@cindex ARM720T
These commands are available to ARM720T based CPUs,
which are implementations of the ARMv4T architecture
based on the ARM7TDMI-S integer core.
-They are available in addition to the ARMv4/5 and ARM7/ARM9 commands.
+They are available in addition to the ARM and ARM7/ARM9 commands.
@deffn Command {arm720t cp15} regnum [value]
Display cp15 register @var{regnum};
These commands are available to ARM920T based CPUs,
which are implementations of the ARMv4T architecture
built using the ARM9TDMI integer core.
-They are available in addition to the ARMv4/5, ARM7/ARM9,
-and ARM9TDMI commands.
+They are available in addition to the ARM, ARM7/ARM9,
+and ARM9 commands.
@deffn Command {arm920t cache_info}
Print information about the caches found. This allows to see whether your target
These commands are available to ARM926ej-s based CPUs,
which are implementations of the ARMv5TEJ architecture
based on the ARM9EJ-S integer core.
-They are available in addition to the ARMv4/5, ARM7/ARM9,
-and ARM9TDMI commands.
+They are available in addition to the ARM, ARM7/ARM9,
+and ARM9 commands.
The Feroceon cores also support these commands, although
they are not built from ARM926ej-s designs.
Print information about the caches found.
@end deffn
-@deffn Command {arm926ejs cp15} opcode1 opcode2 CRn CRm regnum [value]
-Accesses cp15 register @var{regnum} using
-@var{opcode1}, @var{opcode2}, @var{CRn}, and @var{CRm}.
-If a @var{value} is provided, that value is written to that register.
-Else that register is read and displayed.
-@end deffn
-
@subsection ARM966E specific commands
@cindex ARM966E
These commands are available to ARM966 based CPUs,
which are implementations of the ARMv5TE architecture.
-They are available in addition to the ARMv4/5, ARM7/ARM9,
-and ARM9TDMI commands.
+They are available in addition to the ARM, ARM7/ARM9,
+and ARM9 commands.
@deffn Command {arm966e cp15} regnum [value]
Display cp15 register @var{regnum};
@cindex Debug Access Port
@cindex DAP
These commands are specific to ARM architecture v7 Debug Access Port (DAP),
-included on cortex-m3 and cortex-a8 systems.
+included on Cortex-M3 and Cortex-A8 systems.
They are available in addition to other core-specific commands that may be available.
@deffn Command {dap info} [num]
projects / fw / openocd / blobdiff