requirements that all reset pulses last for at least a
certain amount of time; and reset buttons commonly have
hardware debouncing.
-Use the @command{jtag_nsrst_delay} and @command{jtag_ntrst_delay}
+Use the @command{adapter_nsrst_delay} and @command{jtag_ntrst_delay}
commands to say when extra delays are needed.
@item @emph{Drive type} ... Reset lines often have a pullup
@section Commands for Handling Resets
-@deffn {Command} jtag_nsrst_assert_width milliseconds
+@deffn {Command} adapter_nsrst_assert_width milliseconds
Minimum amount of time (in milliseconds) OpenOCD should wait
after asserting nSRST (active-low system reset) before
allowing it to be deasserted.
@end deffn
-@deffn {Command} jtag_nsrst_delay milliseconds
+@deffn {Command} adapter_nsrst_delay milliseconds
How long (in milliseconds) OpenOCD should wait after deasserting
nSRST (active-low system reset) before starting new JTAG operations.
When a board has a reset button connected to SRST line it will