PIC32MX: add unlock cmd

[fw/openocd] / doc / openocd.texi

diff --git a/doc/openocd.texi b/doc/openocd.texi
index 9d1532b1c900a5837c0554c93f2fbb431f409ce7..da2782b133895b10aa28c7d567589e03b406942f 100644 (file)
--- a/doc/openocd.texi
+++ b/doc/openocd.texi
@@ -590,6 +590,7 @@ Configuration files and scripts are searched for in
 @enumerate
 @item the current directory,
 @item any search dir specified on the command line using the @option{-s} option,
+@item any search dir specified using the @command{add_script_search_dir} command,
 @item @file{$HOME/.openocd} (not on Windows),
 @item the site wide script library @file{$pkgdatadir/site} and
 @item the OpenOCD-supplied script library @file{$pkgdatadir/scripts}.
@@ -2643,7 +2644,7 @@ needing to cope with both architecture and board specific constraints.
 
 @section Commands for Handling Resets
 
-@deffn {Command} jtag_nsrst_assert_width milliseconds
+@deffn {Command} adapter_nsrst_assert_width milliseconds
 Minimum amount of time (in milliseconds) OpenOCD should wait
 after asserting nSRST (active-low system reset) before
 allowing it to be deasserted.
@@ -3453,14 +3454,6 @@ be detected and the normal reset behaviour used.
 @item @code{fa526} -- resembles arm920 (w/o Thumb)
 @item @code{feroceon} -- resembles arm926
 @item @code{mips_m4k} -- a MIPS core.  This supports one variant:
-@itemize @minus
-@item @code{ejtag_srst} ... Use this when debugging targets that do not
-provide a functional SRST line on the EJTAG connector.  This causes
-OpenOCD to instead use an EJTAG software reset command to reset the
-processor.
-You still need to enable @option{srst} on the @command{reset_config}
-command to enable OpenOCD hardware reset functionality.
-@end itemize
 @item @code{xscale} -- this is actually an architecture,
 not a CPU type.  It is based on the ARMv5 architecture.
 There are several variants defined:
@@ -4530,10 +4523,10 @@ flash bank ocl 0 0 0 0 $_TARGETNAME
 @deffn {Flash Driver} pic32mx
 The PIC32MX microcontrollers are based on the MIPS 4K cores,
 and integrate flash memory.
-@emph{The current implementation is incomplete.}
 
 @example
-flash bank pix32mx 0 0 0 0 $_TARGETNAME
+flash bank pix32mx 0x1fc00000 0 0 0 $_TARGETNAME
+flash bank pix32mx 0x1d000000 0 0 0 $_TARGETNAME
 @end example
 
 @comment numerous *disabled* commands are defined:
@@ -4545,6 +4538,10 @@ Some pic32mx-specific commands are defined:
 Programs the specified 32-bit @var{value} at the given @var{address}
 in the specified chip @var{bank}.
 @end deffn
+@deffn Command {pic32mx unlock} bank
+Unlock and erase specified chip @var{bank}.
+This will remove any Code Protection.
+@end deffn
 @end deffn
 
 @deffn {Flash Driver} stellaris
@@ -5404,6 +5401,10 @@ Redirect logging to @var{filename};
 the initial log output channel is stderr.
 @end deffn
 
+@deffn Command add_script_search_dir [directory]
+Add @var{directory} to the file/script search path.
+@end deffn
+
 @anchor{Target State handling}
 @section Target State handling
 @cindex reset